DIY crafts from rubber wheels. Figurines for the garden made of tires. Image of the sun based on a tire, bottles

Where to put old tires? This question worries many; in Russia, about a million car tires are thrown away every year. Summer residents actively use this resource to create crafts from tires for the garden, and they also actively decorate front gardens in city yards.

Crafts from car tires

The most common type of crafts made from tires are flower beds. To make a simple flower bed, just use a small piece of plywood, tires and paint.

We cut out a circle from plywood, its diameter should cover the bottom of the tire, screw it on using self-tapping screws and paint the resulting flowerbed in any color. When the paint has dried, we install the flowerbed in the right place and fill it with soil, planting flowers.

Large flower bed in the shape of a flower

Necessary materials:

• Three tires
• Gloves
• Wax pencil (you can use chalk)
• Sharp knife
• Electric jigsaw or grinder
• Galvanized nails
• Paint (one or more colors)

On each tire we draw petals for cutting; if you use a wax pencil, it will additionally lubricate the cut area. The ends can be made smooth or pointed; use a knife to cut out the contours of the petals.

We cut the resulting blanks into two parts with an electric jigsaw, after which we turn each part inside out. We connect the parts in pairs using galvanized nails, and then assemble the flower bed together.

You can also use four parts (two tires) for a flower bed. We paint the flowerbed in one or several colors and, after drying, place it on a flat area with the petals facing up. We fill it with soil and plant flowers.

Coffee table and tire ottoman

Materials:

• Plywood
• Tire
• Self-tapping screws
• Rope rope
• Wheels (for version with table)
• Thermo gun

It is necessary to cut two circles from plywood, with a diameter that covers the tire, and secure it to the wheel using self-tapping screws. We wrap the workpiece with rope so that the layers fit tightly to each other, securing it with a heat gun. For the top, we twist the rope in a spiral and secure it with a heat gun.

The ottoman is ready, for the coffee table we screw the wheels to the bottom. It looks beautiful and unusual, and is also suitable for apartment use; the only drawback may be the weight of the product.

All work must be done with gloves and with extreme caution to protect your hands from cuts. There are a lot of options for crafts for the garden from tires, you can use them to make small fences, large flower beds for flowers and seedlings, they can also be used to make garden furniture (tables and chairs), and various ottomans for the veranda.

Crafts from old tires for children

It is possible to make a playground with your own hands using tires. From them you can make two types of swings, sandboxes and decorations for the playground.

A large sandbox can be made by analogy with the previous master class with a large flower bed, if you add one or two more tires, you will get a sandbox for the entire yard.

Swing No. 1

Necessary materials:

• Tire
• Self-tapping screws
• Dye
• Old seat belts

We paint the tire and wait for the paint to dry completely. We close the hole inside the tire with seat belts and secure them with self-tapping screws. We tie the tire with chains on both sides (you can use strong ropes and cables). We fix the swing on a tree; if there is no suitable place, you can make a base for the swing from a timber.

Swing No. 2

Necessary materials:

• Tire
• Board and timber
• Bulgarian
• Self-tapping screws
• Dye

For the swing you will need a large wheel, cut it in half. We cut out two beams to strengthen the base of the swing, the size of the tire width. We make seats for swings from the board; the board should protrude 40 cm on both sides. We paint all the blanks in the desired color.

After drying, insert the timber into the tire from the side of the cuts and secure it on both sides with self-tapping screws. Afterwards we level the board for the seat and screw it to the reinforcing bars with self-tapping screws. Swing handles can be made from old door handles, rope or rope. From the second part of the tire we make the second swing.

It is easy for creative people to come up with and make useful things from anything. Tires can easily be used to create furniture and much more. Various photos of crafts made from tires can be found on the Internet, with their help you can find inspiration and improve crafts, adapt them for yourself, or make the same ones.

Photos of DIY tire crafts

The desire of people to decorate their summer cottages, to make them comfortable and beautiful using scrap materials, has led to the emergence of unusual design solutions. A unique material for turning unusual ideas into reality are waste tires.

Funny tire fakes will revive any corner of the summer cottage: artificial pond, flower bed, playground and garden path. In addition to the decorative function, car tires can also serve practical purposes - for swimming pools, furniture, bicycle parking, swings, sandboxes.

Idea one: Tire flower beds

The easiest way is to take an old tire, fill it with soil and plant flowers. Of course, this cannot be called an exclusive decoration. What can improve the situation? Let's take oil or bright acrylic paints, we will select several that match the colors best and paint the tires. Then let's put them on top of each other. This way you will be able to multi-level flower bed.

You can make something unusual vertical flower bed. To do this you need to take several tires different diameters and put them on top of each other in the form of a pyramid.

If you don't have a small tire for the top, you can put a pot of flowers.

After you fill the interior space of the resulting flowerbed with soil, you can plant it hanging plants– strawberries or petunia.

Flower beds made from old tires can also be suspended. Take a strong metal chain, attach it to a tire and hang it from a tree. To prevent the earth from spilling out of the tire, we cover the bottom with improvised material. For example, you can attach a flowerpot with a slightly larger diameter than the inner circumference inside the tire. You can also put a piece of thick rubber inside. Think about the idea; you probably have suitable material on your site.

Well, if you dream up your imagination, you can make a composition out of tires in the form of home tea. A pair of tires is ideal for the role of a cup and a teapot. All you need to do is complement them with simple details - bent metal strips and pipe trim.

Idea two: Garden figurines made from tires

Figures made from tires will certainly make your garden plot more alive and will add positive emotions to you and your children.

The most popular craft is swan. To make it you will need tire without metal cord. In this case, it will be easier to cut. Make markings on the tire in advance. Cuts should only be made with a very sharp knife. To strengthen the “swan neck”, use an iron rod. The last thing to do is paint the resulting swan with the appropriate colors.

It's very easy to make from unwanted tires funny zebra, giraffe or horse. To do this, you need to dig a small wooden beam along with the tire into the ground. The blanks must be decorated and painted in such a way as to convey the external characteristic features of each animal.

Tires that have outlived their service life, together with an old enamel basin, can easily turn into a fairy-tale turtle or frog. Creativity and sleight of hand will allow you to create fun and beautiful compositions.

Idea three: Furniture for the garden

In your garden, furniture made from tires will look quite original. Moreover, it can be made in different styles using one or another upholstery fittings (leather, fabric, wicker, wire, and so on).

You can also create from tires comfortable seats for relaxing in the garden. To do this, they need to be wrapped in belts or ribbons made of fabric, which will simply intertwine with each other. There is nothing complicated about this technique. A practical method has established that decorating an ottoman from car tires will take a little more than an hour.

Tires of almost any size and diameter are suitable for the production of country furniture. Of course, choose not the hardest so that the reinforcing fibers do not cause you trouble - cuts or scratches.

Armchairs, tables, poufs, magazine stands, chandeliers, swings, flowerpots, fountains and even washbasins are just a small part of what you can turn into using a tire.

Video: making a pouffe for a summer house from wheels

Coffee table for the country house

Idea four: Tire swing

What would childhood be without a swing? In the yard, on the playground, in the garden or at home - this is a mandatory attribute of an interesting and fun pastime. A small play corner can be arranged both at home and in the garden. And it is not at all necessary to make excessive efforts and large financial expenses for this.

Tire swings are considered less traumatic than their wooden and metal counterparts, and of course, safer.

Well, they will bring incredible joy and benefit.

I would like to note that experienced craftsmen come up with new useful items from tires with great pleasure and enthusiasm. Let's start with the simplest method. To do this you will need:

• A strong branch, preferably hanging parallel to the ground.
• Jigsaw.
• Chains or rope.
• Tire.

You must make a loop at the end of the rope. Double-check that you have tied a very strong knot. We throw the loop over the branch. Pass the other end through the loop and tighten. Tires for such a swing are installed vertically. We pass the rope through the wheel and fix it at a level of about 90 cm above the ground.

In order to swing on a tire swing, you need to climb inside and hang your legs on the other side. This counts the simplest design. Do not forget that very young children should not ride on such a swing. It can be traumatic. Adults and large children are also not recommended to test the strength of such swings. Otherwise, make sure the branch can support a lot of weight.

Idea five: Garden paths made from tires

You can create interesting paths in your garden plot by making them out of old tires from cars or trucks. We recommend that you better look for the second ones; you will need less time to work with them. For the track we only need tread.

It is done easily and simply:

• First thing decide where the path will go, and select the material.
• Prepare tires for installation– Use a sharp knife to separate the side of the tire from the tread. You will get a kind of ring.
• Divide the ring crosswise. You will have a ready-made strip for the path.
• In the same way make so many ribbons, how much you will need to lay a path for the garden.
• Lay out the ribbons lengthwise and nail them down to a board or beam. Be sure to leave a small space between the tapes; in the near future, grass will grow in this place, which will prevent the tapes from moving.
• The area where you plan to lay the path must be prepared in advance moisten Thus, the tires are stronger and bond to the ground faster.
• Tires along with boards need good press into the ground so that the path is free of bumps.

This path is ideal for a garden or patio. In a similar way you can do parking lot.

Disused tires are also a good material for creating a staircase path. You can arrange them at your discretion and according to the functional purpose of the staircase. Its installation will not take much time, and there are practically no expenses. You can take old tires from any tire shop or service station.

Detailed MK: Cockatoo plant pots

Flowerpot in the shape of a cockatoo– it’s convenient to plant flowers in it and place them anywhere. The process of creating a fake consists of several stages:

1. We make markings on the tire. It is very important that the inside of the rubber ring is intact; this is where the bird will be hung. For the cockatoo's head you will only need 5-6 cm of rubber.
2. The rest of the tire along the tread line needs to be cut off a little further than the middle. For the tail, we leave rubber flaps of different shapes. They can be trimmed along the edges or made shorter if desired. This way the fake will look more natural.
3. Once all the pieces have been cut and marked, tie together the pieces that will allow the cockatoo to hang.
4. To make the fake bright and expressive, paint it with colorful colors. Before you start decorating, make eyes and a nose out of a piece of rubber, glue them onto your face and leave them to dry for a while. Only after this can the entire figure be covered with paint.
5. Leave the inside of the fake in its original form; soil will be filled in here. By covering the resulting figurine with varnish, you will maintain the brightness of the shade for a long time.

Step-by-step photos for creating a flowerpot from a tire:

When creating original fake tires with your own hands to decorate your garden plot, do not forget that rubber is easily exposed to water and sun, releasing toxic substances into the atmosphere and soil. That is why you should not make beds from tires. Use them to increase the functionality of the site and decor.

Turning used items into various pieces of furniture and decor has long become the norm. Many people no longer look at old tires, pallets and plastic bottles as garbage, but solely as building material. Perhaps, after reading our article, you will also join them, because today we will talk about what amazing crafts from tires you can make with your own hands.

How to make crafts from tires with your own hands.

Let's start with not just beautiful, but with beautiful and useful. From used tires you can make many functional things for your garden plot.

How to make garden furniture from tires with your own hands - master class.

Old tires need to be washed and cleaned. For cleaning, you can use a special tire cleaner - this will give your tire a shiny black appearance.

To get rid of the gloomy black color, first paint our entire workpiece white. Then we apply our drawing with colored paints. And finally, add clear dark contours to the drawing.

For the middle of our ottoman we make a round pillow. In order to apply color painting on black leatherette, fill the space under the design with white paint, and then apply a colored pattern on top of it.

How to make an ottoman with a knitted cover from an old tire - master class.

If for garden furniture made from tires its resistance to weather conditions was important to us, then for a gazebo or terrace we can make another beautiful version of an ottoman made from tires.

We attach the legs to the tire that has been cleaned of dirt.

We knit the side surface for our ottoman. If you don’t know how or don’t want to knit, you can use parts of an old sweater for these purposes.

We fasten the knitted fabric to the tire from the side and bottom. We close the top hole in the tire with a circle of plywood.

We crochet the round knitted piece for the top of the ottoman with the side piece.

Interesting options for crafts made from tires.

There are other simple options for tire garden furniture. We can stack tires on top of each other and use scraps from the top of the tire to make seats and armrests.

Or another version of furniture made from tires. Wooden spacers are inserted into the tire halves and a soft roll is sewn in - so you have a comfortable seat for the chair.

Tire crafts for children.

It is easy to make devices for playgrounds from tires. For example, here is a simple swing.

Or a car that will not leave any child indifferent.

DIY flower beds made from tires.

Very often, old tires are used to create flower beds and outdoor flower pots. So to speak, cheap and cheerful. The flowerbed can be given a more decorative look by arranging its edges in a more interesting way.

To make such a flowerbed, you should mark the side of the tire as shown in the photo. And then just cut along the line.

The cutting process itself can be tricky. Ideally, this is best done with a jigsaw. If you are cutting with a knife, then lifting the cut with a wooden peg will make your work much easier.

The cut tire must be turned out. It's easier to do it together. But you can turn out the tire alone by stepping on the edge of the tire with your foot and turning out the other edge with your hands.

Such flower beds can be varied and original - this is what helped them gain great popularity. The most famous option is to place the tire on a stand that we previously cut from its top.

Human imagination is inexhaustible. Craftsmen from the people create real miracles with what pragmatic consumers send to waste. Almost everything is used: broken pots, seashells, pebbles, old equipment and other utensils that are no longer used for their intended purpose, but acquire a second life when the hands of a master touch them. And, of course, the list of “raw materials” for practical decor is not complete without outdated car tires.

Previously, they were used exclusively for economy-class playgrounds; today they have come up with many more creative uses: photo crafts made from car tires , accompanying our article is a clear confirmation of this.

Crafts from tires for the garden: garden furniture

The simplest thing, in our opinion, is tire product – dining or coffee table. Glue two or three pre-cleaned and painted tires (depending on what height you want to get), secure any alternative tabletop on top: wood, plastic, glass, or simply cover the tire with twine. Movable wheels attached to the bottom add mobility to the product.

The unusual table will be complemented by one more tire product – ottoman or armchair. Cut a circle from chipboard or thick plywood to fill the cavity inside the tire, put a couple of layers of foam on top - the pouf should be comfortable. The upholstery for such a “chair” can be knitted or sewn from any fabric or an old blanket in a spectacular Scottish check. Make the legs from blocks, and the back from another tire, cut in half.

How to make an ottoman from a tire: master class

Crafts from wheels for children

Tire crafts for They will not let your child get bored, providing him with productive and exciting leisure time. Cover the old wheel with colored twine and cut a “cover” to size for it - you’ll get a comfortable one box for children's street toys.

A massive truck tire easily turns into, and a pair of tires suspended from a tree will simultaneously become swing and an equilibristic projectile. The main thing is that the tree is strong, and the ropes and fastenings are reliable - appropriate for the age and weight of the child.

DIY tire swing: video

Crafts made from tires for the garden

A hollow tire is an excellent alternative. And it’s not at all necessary to cut out swans or other intricate designs from it. tire figures , as they did back in Soviet times. Just a few wheels, painted in bright colors and laid out in a certain sequence, look much more impressive and stylish.

Get creative - don't put flowerbed tires on the ground, and hang them from the ceiling on ropes or chains. A climbing, beautifully flowing flower, for example, an ampelous petunia or begonia, planted in such a “pot” will delight you with abundant and long-lasting flowering.

If you want to zone the space of your garden plot, make it low h abor from tires , placing garden lanterns next to it. When there are differences in height or access to water on the site, old tires will become alternative steps, the main thing is to reliably “mount” them into the ground.