Crafts from plastic bottles (115 photos): we make original decorations with our own hands. Interesting crafts made from plastic bottles DIY crafts made from plastic bottles

Advice! It is much easier to work with plastic bottles of the same color.

And if you are planning a large product (for example, outdoor furniture), it is recommended to collect bottles of the same shape and size. For some small crafts, on the contrary, bottles of different shapes, colors and volumes are suitable.

What crafts can be made from plastic bottles for kindergarten?

Crafts for the garden from bottles can be very diverse: from fencing sandboxes to making fairy-tale characters, flowers or lanterns. Here, a lot depends on the imagination of the performer, as well as on the amount of collected plastic containers.

Important! In children's institutions, it is better not to use long-drying toxic dyes. Therefore, when painting plastic crafts, it is recommended to use water-based acrylic paints - they dry quickly, lay down in an even layer on the plastic, and have a bright palette of shades.

Bottle Palm

You can build not only an exotic palm tree from plastic, but also any other tree - the principle of its manufacture will be almost the same. To work, you will need plastic bottles, scissors and a knife, metal wire or a long wooden rod, acrylic paint (if you couldn’t find bottles of the desired shade).

The entire process of making a palm tree from plastic consists of several stages that are very easy to implement:

1. Dark brown plastic bottles will be used to make a tree stem. To do this, you need to cut off the bottom of the bottles - it will not be needed in the work.
2. A metal or wooden rod is inserted into the ground, imitating the frame of a palm tree trunk. The length of this frame should correspond to the desired height of the tree.
3. Cut brown plastic bottles are strung onto a reinforced rod, neck up.
4. When almost the entire rod is hidden behind the plastic, the last part is strung - it is better if the bottle is green and blends in with the crown of the palm tree.
5. To roughen the trunk and make it even more similar to the original palm tree, you can use scissors to cut teeth on the free edges of the bottles and bend them outward a little.
6. Now leaves are made from green plastic bottles. Here everyone can act at their own discretion: you can cut a plastic bottle lengthwise into four segments, leaving only the neck intact, and form carved edges of the leaves; someone uses a different method - cutting green plastic into long thin strips and collecting them into something like hanging palm leaves.
7. All that remains is to fix the leaves on the trunk, and the plastic palm tree is ready. It is quite possible to supplement it with plastic coconuts or bananas.
8. If transparent bottles were used for work, they must be painted with suitable paint.

Advice! Several palm trees will look more organic than a single tree. It is better to immediately make a small “oasis” of three or five palm trees of various sizes.

Such plastic palm trees are not afraid of either rain or snow - they will decorate the playground for a long time and delight the kids (an excellent example of a palm tree is shown in the photo below).

To prevent children from getting hurt on the plastic cuts, it is recommended to melt them a little with a simple candle or match.

Plastic flower beds made from bottles

Many parents and kindergarten workers know how difficult it can be to create a beautiful flower bed on the site. After all, children often trample on flowers, and it happens that there is simply no one to care for the plants.

But this is not a reason to leave the site without bright colors - fresh flowers can easily be replaced with artificial ones, and the easiest way to make them is from plastic bottles. To do this, it is not even necessary to cut out the petals of each flower; you can create a larger composition from plastic.

For such a flower bed you will need the bottoms of plastic bottles - they are cut off with a knife or scissors, cutting the bottle approximately in half. Now the prepared elements need to be painted in the desired color, using thick and uniform paint and a soft brush or spray paint.

When the paint dries, the halves of plastic bottles are inserted into the ground with their bottoms up - you get beautiful and bright flowers, collected in a certain composition.

Attention! To make the flowerbed organic, it is better to first draw its design on a sheet of paper. This will allow you to clearly see the result and correctly select the shades of “flowers”.

Using this simple technology, you can make plastic flower beds of unusual shapes and a variety of sizes (as in this photo).

For those who are able to do more delicate work, the method of creating elegant flowers, the details of which are cut from plastic bottles, is suitable. Such flowers can become a decoration not only on the street, they can be used to decorate a group or assembly hall.

To work you will need simple tools:

• plastic containers;
• dyes based on acrylic or latex (they are more uniform and non-toxic);
• sharp scissors;
• decor in the form of beads to create the core of the “flower”;
• strong wire for the stem and thinner wire for the stamens;
• glue gun or other reliable fast-curing glue;
• candle for melting edges and shaping plastic petals.

Petals of the desired size and shape are cut out of the bottles - it is convenient to use a cardboard template for this. Then they need to be heated over a candle and the edges and middle given the desired shape. Now the petals are painted in the chosen color and allowed to dry thoroughly.

Collect the petals from the inflorescence and attach the plastic parts to the wire stem. The middle is made of wire, thick fishing line and multi-colored beads. Also, flower leaves are cut out of plastic and attached to the stem using a glue gun.

An excellent example of creating such a flower from a plastic bottle is shown in the photo below.

Bottle fencing

From plastic bottles you can create beautiful and durable fences for flower beds or a sandbox, for example. Those who have been working with plastic bottles for a long time recommend strengthening vertical structures by filling the container with ordinary sand, earth or pebbles. This way, if a child steps or falls on the fence, it will not break or become deformed.

Using the same paints, plastic bottles are given the desired shades and placed dropwise around the perimeter of a flower bed or sandbox. Fences made from several rows of painted bottles look even more beautiful - you can even create some kind of pattern inside the fence.

Mosaic of caps

The container can also be used for educational activities with the children themselves. One of these lessons could be a simple drawing made from multi-colored plastic corks. If the children in the group are very small, the leader can make blanks for such a mosaic by drawing circles on paper in the places where the lids should be located.

The child just has to choose the cork of the desired color and use glue to fix it on his panel.

This technique allows you to assemble more complex patterns from plastic bottle caps. Good craftsmen create entire paintings on walls and fences from plastic caps of different diameters and shades (you can see them in the photo below).

Animal world and fairy-tale characters from a plastic bottle

Most of all, children love the heroes of fairy tales and cartoons - these characters can also be easily made from plastic bottles. You just have to be patient and put some skill into making such crafts.

The size of the hero and its complexity depend entirely on the skill of the master. Talented performers make real masterpieces out of ordinary plastic waste. These are firebirds, flamingos, peacocks with huge tails, big wolves, foxes, owls and bunnies, small funny bugs and bright butterflies.

As a rule, such crafts use a metal frame made of a rod, onto which plastic parts of the character’s torso, head and limbs are strung. The easiest way is to make a funny pig out of containers - you can also involve children in this process.

To create a plastic pig you will need:

• five-liter water bottle;
• five regular one and a half liter plastic bottles;
• knife or scissors;
• pink paint and brush;
• wire or something else for the pig's tail;
• beads for eyes;
• glue or a gun with silicone.

The piglet's body and head will be made from a single five-liter bottle. You need to cut off the necks of four small plastic bottles, making one side of the cut slightly lower than the other. These will be the legs of the pig, and such cuts will help to better attach them to the body.

Ears are cut out of the last plastic bottle. The easiest way is to cut them off near the neck, since in this place the plastic is already curved and has the desired shape. If you need larger ears, you can cut them out from the “body” of the bottle and shape them by heating the plastic with a match.

Now the entire structure is put together and all the plastic elements are fixed with glue. All that remains is to paint the piglet in its characteristic pink color and glue on the eyes and tail (the finished pig is shown in the photo below).

Gazebo made from plastic bottles

For those who are not afraid of difficulties and have a sufficient amount of plastic containers, the method of constructing a gazebo is suitable. This can be the simplest structure of four supports and a roof, or a more complex round-shaped gazebo with windows and a doorway - it all depends on the skills of the craftsman.

The main thing is that children will find it interesting and safe to play in such a house, so it is worth making it for the garden.

A building made of plastic can be made on the basis of a metal or wooden frame, or you can use plastic containers themselves as supports, only after filling them with sand or earth.

The roof is covered with light material, such as ondulin or polycarbonate. Also for these purposes, you can use the bottles themselves, connected like a raft or flattened into flat petals and fixed with wire or screws.

The walls are fastened with small self-tapping screws. To facilitate the process or when there is not enough “building material”, you can use waterproof fabric or bright film, the same polycarbonate, which is stretched and fixed between adjacent plastic supports.

The door and windows of the gazebo can be curtained with curtains made from corks from the same plastic bottles. You can assemble such curtains together with your children. To do this, make a small hole in each cap and string all the plugs on a thread with knots or on a long fishing line.

Very beautiful gazebos made from plastic bottles are shown in the photo in this article.

conclusions

Instead of littering the planet, you can use plastic bottles for good - decorate a playground or kindergarten group with them. Plastic is safe for babies, and it is also quite lightweight. If suddenly the structure made of this material is damaged, the children will not be harmed.

Another big advantage of this idea is that the students themselves can easily be involved in the work - even kids can assemble simple crafts for the garden from plastic bottles.

Useful tips

Things made with your own hands are always more valuable and more expensive. We present to your attention a master class through which you can learn how to make not only beautiful, but also useful things from plastic bottles.

Read also: Palm tree made from plastic bottles

Bird dispenser made from a plastic bottle

You will need:

• 1 liter plastic bottle.
• 2 wooden spoons.
• Screw.
• Rope.

1. Draw a hole with a radius of 1 cm at a distance of 10 cm from the bottom.

2. Rotate the bottle 90 degrees and draw another hole with a radius of 2 cm, opposite the first one.

3. The same process must be repeated at a distance of 5 cm from the bottom.

4. Then carefully cut out all the drawn holes with a knife.

5. Now you can insert the spoons.

6. To hang a bottle, you need to screw a screw or screw to the cap of the bottle and hang it on a rope.

7. Finally, you can fill your tank with birdseed.

DIY seedling dispenser from a plastic bottle

This is a real garden that moisturizes itself, and you need to make a minimum of effort. In addition, crafts from such pots develop children in many ways and fresh parsley, sage, rosemary and thyme are always needed in the kitchen.

You will need:

• Marker.
• Durable 1 liter plastic bottles with caps.
• Scissors.
• Label remover (eg vegetable oil).
• The soil.
• Seedlings (they can be purchased in the vegetable departments of supermarkets).

1. Mark a line 12 cm from the bottom of the bottle.

2. First, poke a hole on the marked line with a knife, and then use scissors to cut the bottle in a circle.

3. Remove labels using vegetable oil.

4. Insert the upper part of the bottle along with the cap into the lower base.

5. Fill the top with soil.

6. Secure the seedlings by pressing them gently with soil.

7. Add water to the bottom of the bottle until the water covers the cap.

8. After which some amount of water will be absorbed by the soil and you need to add water, following the instructions for a particular plant.

Craft a pencil case from a plastic bottle

Unnecessary plastic bottles can be used for a necessary and convenient pencil case. The proposed item can be improved, it all depends on your imagination.

You will need:

• Empty, washed and dried plastic bottles (in this case 6 pieces).
• Scissors.
• Old newspapers.
• Bolon paint.
• Paper clips.
• Glue (it is necessary that it glues the plastic well, but does not corrode it).

1. Lay the bottle on its side and carefully insert the knife blade at the base. Cut it along the bottom contour.

2. Repeat the procedure with the remaining bottles.

3. Place all the resulting products on an old newspaper with the bottom facing up.

4. Spray paint on the outside of the products in several layers.

5. Once the bottles are dry, it's time to line the cut edges with felt. The felt strips should be slightly longer than the circumference of the bottle. Glue the material evenly and thoroughly to each section of the bottle.

6. Wait 15-20 minutes for the glue to dry. It’s better not to touch the extra, remaining felt for now.

7. Secure the felt with paper clips for better adhesion. Wait another hour and then trim off the rest.

8. Decide exactly where the entire structure will stand, and use glue to attach all the bottles to each other from the felt side along the edges. For good strength of the entire pencil case, do not skimp on glue.

9. The glue must dry completely. You can fill out your pencil case. All is ready!

Crafts from plastic bottle caps for the garden

Sealed bag

1. Trim the thread on the neck of the bottle.

2. Place the plastic bag over the spout and screw on the lid.

This seals the bag, which promotes long-term storage of food.

Original curtains made from lids

These original curtains can be used as interior doors to decorate a house, cottage or apartment.

Simply connect plastic bottle caps with fishing line or thread. At the same time, the curtain pattern can only be limited by your imagination.

DIY paintings from lids

Plastic bottle caps can even work in fine art.

Try to make such a picture, because even children can do it.

You will need:

• Canvas (any desired size).
• Plastic bottle caps.
• Paint (acrylic) and brush.
• Pencil.
• Ruler.
• Glue (not quick drying).
• An assortment of jewelry, beads, mosaics or buttons.

1. Using a pencil and ruler, mark the sections on the canvas.

2. Glue one large plastic cover in the center of each section. Then you can glue lids of different sizes and shapes to the first one.

3. Paint the entire canvas with black paint and let dry.

4. Glue an assortment of jewelry in the center of each lid and let dry.

5. Now the sections can be decorated as you like.

How to make toys from plastic bottles

DIY snake toys

Make funny foam snakes with this simple device at home!

You will need:

• Scissors.
• Plastic water bottles.
• Old towels.
• Rubber strip.
• Small bowl.
• Dishwashing liquid.

1. Cut off the bottom of the plastic bottle.

2. Secure the towel to the bottom of the bottle with a rubber band.

3. Place the bottle, towel side down, into the bowl of soapy water. After this, you can create snakes from tiny bubbles.

Important! Care must be taken to prevent soapy liquid from entering the mouth and eyes.

DIY crocodile toy

You will need:

• Two half-liter plastic bottles.
• Bottle caps.
• Scissors.
• Glue.
• Thin paper.
• Brush.
• Waxed paper.
• Eyes (for example, you can use buttons).

1. Using a knife and scissors, cut the bottles in half, then trim one piece so that the height remains 7cm.

2. Trim the edges of the bottles so that the crocodile is bent.

3. Glue the lid legs to the crocodile evenly.

4. Make thick paper balls and attach them like crocodile eyes.

5. Cover the entire body with thin green paper.

6. Cut out initialed paper and glue on paws, eyes and teeth. Paint your teeth white and your nostrils and eyes black.

Instructions: vase made from a plastic bottle

1. For convenience, cut the bottle at the top contour.

2. Measure and cut strips evenly around the bottle. It is more convenient to do this by cutting wider segments in half.

3. Gently press and fold all the strips outward.

4. Press down on the bottle, placing it upside down on a flat surface. This will help align the edges.

5. Fold the end of each strip under the next two. Do this so that the tip of each strip is in the place indicated in the photo.

You can add balls and stones to create a beautiful play of light in the sun. Since the vase will be very light, the weight can help ensure proper balancing.

Warning! Such a vase will be subject to large temperature changes. Therefore, do not leave it near heating units to prevent thin strips from spreading.

Large garden lamp made from a plastic bottle

The bottle is used as a light source. This invention can turn a small lantern into a lamp with a large illuminated space.

Alternatively, you can use a bleach solution in a bottle to better diffuse the light.

Universal spoon made from a plastic bottle

This simple, but at the same time sometimes very necessary spoon (for example, at a picnic) can be cut from an empty plastic bottle.

Making food containers from plastic bottles

The idea is to use two plastic bottles to make a container for storing food items such as beans, rice, noodles and sugar.

Just cut bottles of different sizes: the long one will be the base, and the short one will be the cap. Choose a size so that the lid closes easily and at the same time tightly.

Watering from plastic bottles

If you have a large garden, but don’t have time to water and don’t want to spend money on newfangled expensive designs, then we present a simple idea of ​​a sprinkler.

at 05/28/2017 148,798 Views

You can make many useful things for your garden and dacha from plastic bottles

While lovingly arranging our city dwellings, we are no less touching about our summer cottages. We try to improve them, create comfortable conditions for ourselves and add special notes of attractiveness to the even rows of beds and berry bushes. Many summer residents have chosen the most accessible and flexible material for their creative experiments - ordinary plastic bottles. We will talk further about what products can be made from it for the garden and dacha!

• House made of plastic bottles
• Country crafts from plastic bottles step by step: palm tree made from plastic bottles
• Plastic crafts: some tips
• Master class from plastic bottles step by step

Wonderful hanging cactus pots made from plastic bottles

Resourcefulness in ways to place many plants in the garden area

Plastic bottles in skillful hands will become a wonderful decoration for your landscape

Beautiful flower made from plastic caps

Crafts from plastic bottles step by step: from flower pots to fairy-tale towers

The idea of ​​making useful devices and decorative items from plastic containers is not new. The first attempts led our grandparents to build low fences for paths. Having appreciated the plasticity and low cost of the material, craftsmen from among the people moved on. And now the summer cottages are decorated with full-fledged fences, funny figures and unusual devices made from plastic bottles.

Your children will definitely like this beautiful ostrich from a pet container!

Thanks to imagination and such excellent material as plastic bottles, we have almost limitless possibilities for creating crafts for every taste, any complexity and direction

Paintings made from the caps of plastic bottles and other containers have grown into an entire art movement.

Plastic bottles have long been in great demand among gardeners

Gorgeous orange flowers from pet containers

Crafts and decorations for the cottage and garden made from plastic bottles do not require the use of complex tools and specialized skills. The main thing is to have time and desire, as well as enough material. Those who have both have convincingly proven the limitless possibilities of such handicrafts, and we have prepared a review of the best examples of crafts.

DIY furniture, flowerpots and a vase made from a plastic bottle

Comfortable and very stylish chair made from plastic bottles

A sheet of plywood, sixteen one and a half liter bottles, adhesive tape - and a comfortable and durable coffee table will appear on your site. Plywood can be replaced with plastic or hardboard, an old countertop or plexiglass. From the same materials, slightly changing the design, you can make a garden bench. Some diligent and patient craftsmen manage to assemble full-fledged sofas and armchairs from bottles.

You can even make the basis for a full-fledged sofa from plastic bottles if you fasten them firmly and carefully

Hanging flowerpot or base for flowerpots

DIY ottoman made from plastic bottles

How to make a pouf from pet containers

House made of plastic bottles

Among the summer residents there are also real builders who know that they can build whatever their heart desires from plastic bottles. They collect gazebos, toilets, sheds and even from plastic bottles. The only difficulty with such structures is not in their assembly, but in collecting the required number of bottles.

House with a roof made of 7,000 bottles

Plastic bottles are a good base material for building the walls of a summer house, greenhouse, shower, toilet or other partitions

Greenhouse walls made of containers on a wooden frame

Bottoms from plastic bottles will help you decorate garlands for the garden

Children's playground: flowers made from plastic bottles and toys made from plastic bottles

Crafts made from plastic bottles will help decorate the playground

All kinds of crafts made from plastic bottles are especially attractive for decorating a children's playground. Absolutely safe, they can become the basis for toys, fun decorations, and for creating story compositions. Funny elephants, bees, bunnies and hedgehogs, bright flowers, cheerful lanterns will turn the country island of childhood into a fairy-tale kingdom.

A whole plot for a children's playground from the caps of plastic bottles and canisters

Together with children, you can make small crafts and large plot mosaics from the caps of plastic bottles

Plastic bottle doll

Examples of a variety of crafts that will help the gardener with placement, easy transportation and care of plants

Piglets from large plastic bottles - stable stands for germinating seedlings or small plants

Craft for garden or lawn decor: parrot from pet container

Crafts for the garden and useful little things

Multi-colored turtles will be an excellent element of your garden decor.

You can see how easily the “crazy” hands of summer residents transform used plastic containers into useful summer cottage devices by walking through suburban areas. Here, on the trunk of a tree, a washbasin was nestled comfortably, and in the next yard, the gazebo was decorated with multi-colored, fragrant and ampelous geraniums. We have also prepared for you several descriptions of crafts made from plastic bottles for the garden.

DIY bird made from plastic bottles

DIY painted garden owl lanterns

Birdhouse made from a plastic bottle

It’s very easy to make a birdhouse from a plastic bottle

Plastic bottles cut in half will become cute flower pots; it is important to carefully paint them. It is also advisable to take opaque bottles for this.

The ever-tangling and stuck twine for tying seedlings will stop tormenting you if you hide the ball in a plastic bottle. Just cut the bottle in the middle, insert a ball into the top, pass the end of the twine into the neck, connect the parts, secure the cut with tape - and your convenient storage is ready.

Drip irrigation from plastic bottles

Your seedlings will not wither, even if you go away for several days: install semi-automatic watering. Once again, plastic bottles come into play. We cut off the bottom of the bottle, about 2/3, drill 4-8 holes in the cork, close the neck, bury the bottle upside down, pour water - and the seedlings are provided with moisture during your absence. A similar garden made from plastic bottles (photo confirms this) will significantly save your time and money.

Automatic watering "Aquasolo" - these are conical nozzles on a bottle with a thread that do not require wasting time on drilling slots, digging into the ground, and so on.

Anthurium with a convenient automatic watering system "Aquasolo"

Maximum space saving: plastic bottles suspended one above the other with a cut tube with water passing through them

• For the same seedlings, plastic bottles make excellent containers. After cutting the bottle in half and taking the bottom, pour the prepared substrate into it, plant the plants and place them on a shelf made of wooden planks. This design is also suitable for decorating your home with flowers.

Beautiful hanging pots made from plastic bottles will not only decorate the interior, but also make it unique

Excellent flowerpot made from a shampoo bottle with your own hands

Arrangement of compact placement of seedlings or small plants at the dacha

Bird feeder made from a plastic bottle

Some crafts made from plastic bottles for the garden amaze the owners with their ingenuity. By placing a bottle on a hose and making many holes in the bottom, you will get an excellent diffuser for watering your garden. From a five-liter container you can build an elegant lamp for the veranda, and a mineral water container is suitable as a bird feeder.

Bird feeder made of plastic container

A simple and convenient hose sprayer for garden watering

• Plastic bottles will help you save trees from pests. Cut the bottle lengthwise into two halves, fill it with a mixture that is attractive to pests and add insecticides, and bury it at the base of the trunk.
• From bottles you can make a magnificent decorative all-weather and all-season flower bed. Just paint the bottoms of the bottles in different colors and make a wonderful carpet out of them by sticking them open side into the ground. The carpet pattern can be pre-reproduced on paper.

Decorating flower beds with pet containers has become very popular

• One Brazilian engineer did the calculations and built a solar collector from plastic bottles. The structure can be placed on a summer cottage, connected to a storage tank, and you will always have a warm shower.

Construction of a solar collector made of plastic bottles

Automatic watering of seedlings and ornamental plants in your absence using a plastic bottle dug next to the roots with small holes drilled in the neck or cap

Cut plastic containers suspended one above the other are the fastest and most economical way out of a situation when you need to germinate a lot of seedlings in a limited space

Making an owl from a plastic bottle with your own hands

Bottles for germination and winter holding of plants - an opportunity to save space and ensure good irrigation and drainage

Products made from plastic bottles: artistic masterpieces

Magnificent dandelions from pet containers will never cease to delight you and your guests

The imagination of folk craftsmen is so diverse that it leads to the appearance of outlandish animals, fairy tale and cartoon characters, exotic plants, and original thematic compositions in summer cottages.

We cover the bottom of a plastic bottle or cup with dry twigs and get an unusual candlestick, protected from the wind.

Rainbow decor for a garden, workshop, garage: a fountain of spirals cut from multi-colored plastic bottles

Plastic bottles are used not only to decorate the garden, but also to decorate the home.

Country crafts from plastic bottles:

If you have a small pond on your site, you can decorate it with a plastic palm tree. It's not at all difficult to make. You will need:

• 10-15 brown plastic bottles (for the palm trunk);
• 5-6 green bottles (preferably long);
• iron or willow rod;
• an awl or drill for making holes;
• sharp knife or scissors for cutting bottles.

A palm tree made from plastic bottles looks very beautiful

Now let's start making the decoration.

• Cut all the brown bottles in half. We take the lower parts and use an awl to make holes in the bottom of each of them, equal in size to the diameter of the rod.

Advice! You can also take the tops of the bottles, then you won’t have to make additional holes.

• For green bottles, cut off the bottom by about 1 cm. Leave one of the blanks with a neck, cut it off for the rest to make a loop.
• Carefully cut the green bottles lengthwise into three equal parts up to the loop.

Making palm leaves

• We cut out the edges of the brown parts with jagged edges to create an imitation of a rough palm tree trunk.
• We securely fix the rod in the soil. We calculate the length of the rod by laying out the brown parts on the ground in one row, plus 2-3 cm for the leaves.

We put brown bottles on it.

Making a trunk for a palm tree

• We string our leaves onto the free top of the rod, finishing the work with a blank with a neck. We make a hole in the lid and screw it onto the last sheet, securely securing the entire crown.

Connection of trunk and leaves

Assembling a palm tree from plastic bottles

Using several rods of different lengths, you can create a real oasis. As you can see, making garden crafts from plastic bottles with your own hands is not so difficult; the main thing is to find a sufficient amount of material and take one of the proposed ideas as a basis.

Step-by-step guide: making fabric pots on bases from plastic bottles.

Hedgehog from a plastic bottle and twine rope: growing seedlings and small creeping plants

Crafts for the garden from plastic bottle caps

You can create real masterpieces from plastic lids

Don't throw away bottle caps. Decorative crafts made from caps from plastic bottles for the dacha and garden can also beautifully fit into its landscape. They will serve as an excellent mosaic material for decorating fences and walls of a country house.

Bright compositions made from plastic lids will help make your landscape design more fun.

Video master class (from plastic bottles of standard capacity):

A path made of plastic covers is not only economical, but also very beautiful

Large-scale red and blue mosaic of caps of different sizes

Having tinkered a little with the pattern, painted and drilled holes in the sides of the covers, you can use them to assemble a curtain for the door. An excellent option for protection against insects!

The lids can be turned into a beautiful tabletop or a practical doormat. Use them for decorative finishing of the interior space.

Gorgeous door curtains made from plastic covers

Carport that diffuses sunlight

Beautiful lanterns in Hawaiian style

Before starting work, remove the labels from the bottles and wash the container thoroughly.

For stability of vertical structures, fill the bottles with sand or small pebbles.

Dragonflies made from corrugated plastic bottles

An ingenious device for collecting fruit from trees

Hanging pots made from pet containers with images of animals will fit perfectly into the interior of a children's room

Choose plastic bottles of different softness for crafts. For example, for the body of a dog or elephant, take a strong base, but for the ears it is better to use softer plastic.

Master class from plastic bottles (step by step):