Khrushchev apartments are apartments that were built in the twentieth century, during the reign of N.S. Khrushchev. They are distinguished by the presence of one or several rooms of a very modest size, a storage room located in the kitchen, bedroom or hallway, and low ceilings, so the main task when planning such buildings is to use all possible space to the maximum. How to turn a storage room into a spacious dressing room - read on.

A separate room for storing a wardrobe is the cherished dream of any woman, but the more practical part of the male population will ask: “Why is a dressing room better than an ordinary spacious wardrobe?” Of course, at first glance, it may seem that a closet takes up significantly less space than a whole room for storing clothes, but we have several reasons in favor of organizing a dressing room.

Advantages of the dressing room:

1. When creating a project for placing furniture in a room, you must take into account, in addition to the area occupied by the cabinet itself, about 50 cm of free space for approaching it. A dressing room, which is located in a separate room, does not require additional space in the room in which it is located.
2. A dressing room, unlike a closet, allows you to choose clothes for at least two family members at once.
3. Looking around the dressing room, you will be able to see all the clothes in it (provided that an open storage system was used to decorate it).
4. Even a small separate room equipped for storing clothes allows you to change clothes without leaving it.
5. By allocating a separate room for a wardrobe, you will make the room where the wardrobe could be located much more spacious.
6. It is not necessary to give up a full room for a wardrobe; you can use a closet for this purpose, in which most housewives store things that are unlikely to ever be useful, but it would be a pity to throw them away.
7. You can design a dressing room in accordance with your own desires and needs, so you can be sure of the safety of things located in this room.
8. A dressing room can be an excellent gift for your wife on March 8 or her birthday.

As you can see, even a small dressing room has a huge number of advantages over a closet, and if a room was used to create it, which has not yet been put to reasonable use, it will suit even the most ardent pragmatist.

Dressing room from a closet in a Khrushchev building: we put all the clothes in a small space

If the storage room, instead of which you are planning to equip a dressing room, is located in the corridor, then most likely it is very small. Therefore, ready-made furniture is not suitable for such a room, since it usually takes up quite a lot of space. You can order a ready-made ensemble for this room, according to your own design, or arrange it yourself.

Prepare the following tools and materials:

• Roulette;
• Building level;
• Ladder;
• Hammer;
• Screwdrivers;
• Drill;
• Screwdriver;
• Jigsaw;
• Self-tapping screws;
• Construction pencil;
• Special metal or wooden pipes for hangers and frames;
• Material for creating shelves, such as chipboard;
• Boxes and baskets;
• Connecting corners;
• Furniture fittings;
• Metal guides.

Before arranging your dressing room, think carefully about what you are going to fit in the dressing room and draw up its design.

Following actions:

1. Carry out interior decoration of the room.
2. Using a pencil and a level, mark the walls according to the design you left earlier.
3. Install the metal frame along the drawn lines, securing it with self-tapping screws.
4. Saw the chipboard sheets into squares of the size required for the shelves.
5. Attach corners and shelf guides to the wall.
6. Mount shelves and hanging rods on the frame.
7. Place baskets or drawers for laundry.

In addition to shelves and rods, you can equip specially adapted compartments for storing ties, jewelry and trouser suits. The work involved in creating a built-in clothing storage system is not at all difficult, so absolutely anyone can do it with a little patience and effort.

Do-it-yourself dressing room space from a storage room in Khrushchev

If you have become the happy owner of an apartment where the storage room is located in the bedroom or kitchen, then most likely it is quite impressive in size. You don’t have to make a storage system for such a pantry yourself; you can order ready-made furniture in specialized stores.

When creating a spacious dressing room project, you can plan a comfortable place for changing clothes with a soft pouf and a full-length mirror.

Choosing furniture for a large dressing room:

1. Open cabinets are the best solution for closets in the pantry. They do not take up extra space, and are very roomy at the same time.
2. In wardrobes designed to store clothes for the whole family, there should be at least two compartments with hanging rods. In one of them you can store outerwear, in the other you can put dresses, shirts and suits.
3. In addition to shoe cabinets, you can organize a place in your dressing room to store shoes with sharp stiletto heels, in the form of a metal hanger.
4. On shelves that are too high or too low, you can store clothes that you for some reason do not wear.
5. Also, for convenience, you should purchase several baskets for underwear.

In a large closet you can make a dressing room that can accommodate the clothes of more than three members of seven.

The aesthetic component of a dressing room

In addition to functionality, when creating a dressing room, you need to think about its attractive appearance. To achieve this goal, you will have to change the interior decoration of this room and its door.

Making a dressing room:

1. It is better to decorate the walls of such a not very large room in light colors; this technique will allow you to visually expand the space.
2. Furniture, on the contrary, is better to choose bright colors to make the dressing room more attractive.
3. It is not necessary to change the material with which the floor is finished; you can simply lay a soft, long-pile carpet on it. This way, the dressing room will become warmer, and it will be more convenient to change clothes in it.
4. For Khrushchev buildings with low ceilings, you should not use plasterboard structures; it is better to simply update the old finish.
5. The door will also have to be replaced to match the style of the room in which the pantry is located.

In order to make the dressing room brighter, install not one, but several lamps.

Arranging a dressing room in a Khrushchev-era building instead of a storage room (video)

There are a huge variety of options for arranging a dressing room. Pay enough attention to the little things, and let your home always be in order!

› Do-it-yourself dressing room in Khrushchev

How to make a dressing room from a storage room in a Khrushchev building with your own hands?

There are still plenty of Khrushchev apartments in Russia and the owners are putting them in order in accordance with modern realities.

In this article we will consider the option of transforming one of the nooks in the apartment called storage room in a small dressing room step by step with photos.

The manufacturing process is quite simple, you can do everything yourself, thanks to the simple design and the use of pipes and fasteners of the Joker system. The name may be unfamiliar to you, but you have seen its elements often in life.

We discussed this concept in detail in the article on making your own dressing room, the article is quite popular, the link to it is below.

It's a shame we didn't take a photo dressing room in Khrushchev in a state that is called "before". And the sight, I must say, was sad - behind the shabby door there were decrepit shelves and things falling out from everywhere.

We are preparing a storage room in a Khrushchev-era building for a future dressing room

The first thing to do before making a dressing room is to put the pantry in order, that is, lay tiles on the floor, level and paint the walls.

Creating a dressing room project for a closet

We divide the small room into two parts - on the left there will be two horizontal pipes in height for hanging clothes, and on the right there is a section with shelves for storing clothes. Both parts of the dressing room are connected to each other using a vertical pipe, which is attached to the ceiling from above and to the floor from below.

We don’t build the door to the dressing room to the ceiling, because it would be too high, and we cover the remaining space with a false panel.

There will be one door to the dressing room and it will be hinged. Due to the fact that the opening is narrow, there is no need to make two compartment doors; no, of course, you could do it that way, but you would have difficulty squeezing into the dressing room.

Let's look at the photo of the project; the wall was removed from the project so that you can see the structure of the dressing room. And the design is really simple and can be done by anyone, and most importantly, it requires little chipboard and forgives measurement errors and crooked room geometry due to the fastening fittings.

Photo of the process of manufacturing and installing a dressing room in a pantry

We install false panels and shelves for the future dressing room

At the first stage, we attach the false panels under the shelves level to the wall.

This design allows you to level out the lack of right angles in the pantry, and also provides reliable support and fastening of the shelves, which, in addition to lying on the ends of these panels, are also attached to them using mounting angles.

We manufacture and install frames for swing doors

The opening to the pantry also turned out to be not rectangular; on the left it was blocked 2 cm to the right, unfortunately, this is how they used to build it. The situation can be solved by making a box, which will be the opening for the future door.

We drill the box parts and fasten them with confirmations. We install the box in the pantry opening using dowels and foam; the process is reminiscent of installing an interior door.

We sew up the top of the opening with a false panel, and attach it to the frame from the inside using mounting angles. We decorate the panel along the contour with a plastic overlay, at the same time closing the gaps that arise due to uneven walls.

How are the filling elements in the dressing room connected?

The vertical pipe to the floor and ceiling, as well as the horizontal pipes on the left to the false panel, are attached using nickels, as in the photo.

On the right, horizontal pipes are attached to a vertical pipe using a connection like this.

The shelves are attached to the pipe using special shelf holders.

Clothes hanger for the dressing room

On the right side of the dressing room there is an empty space that we filled with a clothes hanger. This is a ready-made module that just needed to be secured to the wall using dowels.

Installing a swing door in the dressing room opening

The option of a swing door was chosen as the door to the dressing room; as you said, the opening is too small to install two compartment doors.

An ordinary compartment door is suitable for installation, but special fittings will be required. I still had to look for such accessories.

To install a turning mechanism for a swing door, which is what it is called, it is optimal to use a single-row guide at the top and bottom.

But there were none available and the fastenings were installed using self-tapping screws to the horizontal parts of the door frame made of chipboard; such fastening was also provided for by the design of the mechanism.

You can read more about hinged compartment doors on the website; maybe they are sold or delivered to order in your city.

Construction Materials

Peter Kravets

Reading time: 3 minutes

A A

Apartments (“Stalinka” or “Khrushchevka”, “Brezhnevka” and others) can have different layouts, and often they have a small storage room, made according to the technical plan during the construction of the house. Its location is found near the kitchen or bedroom, in the hallway or corridor.

To optimize space, many owners are looking for ways to make a dressing room out of a closet. This allows you to properly organize the space of the apartment and place many things that are not needed for daily use.

In cases where the storage rooms in the apartment are located near the bedroom, it is convenient to convert the storage room into a dressing room. For such work there is no need to call specialists; you can arrange a dressing room yourself. It is important that the organized system does not look like a closet in which clothes are piled randomly; for this purpose, shelves and drawers are built in the wardrobe.

The inside of the pantry resembles the contents of a closet, only larger in size, with a full door and a place for changing clothes. Let's look at the sequence in which a closet is converted into a dressing room, as well as simple ways to make it comfortable and beautiful.

We find out whether the premises meet the requirements for clothing storage, and only then we make a project. You can turn a dark utility room into a cozy corner even in a cramped Khrushchev-era apartment building:

• the dimensions of the converted room must be no less than 90 cm by one and a half, this is the only way to fit shelves, containers and hangers inside;
• a shelf made on one of the walls provides a minimum width of 120 cm, and if on both sides - then one and a half meters according to the project.

Any storage room turned into a wardrobe or office is always a closed room without light or ventilation. Otherwise, a musty smell may appear. Installing a fan may solve the problem, but then the noise will disturb those in the room.

Lighting is required for the comfort and safety of using the wardrobe. Lamps should be without incandescent elements, so as not to spoil objects and things inside the storage; they can be arranged by slightly recessing the base into the ceiling. LED lighting is considered optimal.

How to equip a dressing room?

The pantry is equipped as a dressing room in compliance with a number of rules. In particular, inside an equipped changing room, only the area on which you can lay out clothes or put shelves with shoes is considered useful space. The room must be arranged in such a way that the air is always dry and cool, and the air masses are renewed.

Typically, owners allocate a small area for a closet in a corner or dead end of a room or hallway. In small-sized housing, this could be a shelving unit with one entrance or several, although this is not a very reasonable option. The presence of a mirror will allow the owner to examine himself in full height when changing clothes; if the area is smaller than what is needed for a mirror, it is hung on the wall.

The number of shelves varies according to a person's needs, perhaps many small sections for placing underwear or socks, although it is more rational to store them in containers. Make as many sectors as each family member needs.

Design opinions on how to equip a dressing room from a storage room agree on only one thing - you need from two square meters to 4 square meters. m, 5 sq.m. This allows you to allocate any room for a storage room, balcony or loggia. It is easier to decorate an old room than to build partitions for a new one.

Arrangement of a dressing room in the pantry

The process of how to plan a closet in a pantry is quite simple if you follow certain steps. Let's take a closer look at the sequence of do-it-yourself work on arranging a dressing room from the storage room of an apartment building.

How to select and calculate materials?

A budget dressing room in a Khrushchev-era building instead of a storage room will be quite cozy if the floor, ceiling and wall surfaces are properly finished. When planning a renovation of a residential building, it is important to take into account the design of a pantry with a dressing room. The surface should be very smooth so that when things touch the fabric, puffs and holes do not form. Whitewash or cheap paints are rejected because they are too easily soiled and can, moreover, leave stains on clothes.

This room has poor ventilation, so it is not recommended to bring under-dried items into it. In addition to the unpleasant odor, mold and mildew can form on various surfaces. When planning, it is worth considering ventilation equipment. Purchase plans include MDF and wooden boards, which, due to their porous structure and moisture absorption, are ideal for wardrobes.

The finishing is done so that the floors and walls can be easily cleaned and washed. Paints chosen are odorless, water-based. You should discard carpet - replacing it yourself if it gets dirty is too difficult.

Tools

To make small dressing rooms from a closet in an apartment, you need to stock up on tools. This includes sandpaper and a plane, drills and drills, hammers and screwdrivers, a level, a jigsaw, a tape measure and a pencil, a chisel and self-tapping screws, angles and dowels. The necessary instruments are a level and an altimeter. To apply paint with your own hands, you will need a roller or brush, a tray for diluting the emulsion, mixing the color, gloves and other types of tools.

Preparing the premises

You need to carefully make a dressing room from a small pantry with your own hands, having carried out preliminary preparation work. To do this, the room is cleared of old things, shelves and racks. Do it yourself by cleaning the surfaces of walls and floors, removing paint and plaster.

If there is an unevenness on the wall, leveling is required. Misalignment or other deformations prevent proper installation of storage systems. You need to remove the panel from the doorway. The configuration can be changed; a partition or wall paneling can be made with your own hands from plasterboard.

The ceiling is puttyed, painted and primed against mold and fungal infections. In the photo of an approximate design on the Internet you can find several types of ceiling arrangement with built-in lighting, for which you need to make projections from sheets of plasterboard. The same photos and descriptions contain a detailed description of the work. Linoleum or parquet is placed on the floor; laminate can be used. Tile is considered the best option.

If the storage system in a small pantry is closed, there is no point in spending money on expensive finishing. You can simply paste wallpaper, paint the ceiling and lay tiles on the floor. Tiles are recommended in all types of pantries, especially when installing a washing machine near the bathroom.

Taking measurements

You can make a dressing room in an apartment without special expenses, but before you arrange a dressing room from a storage room, you need to correctly complete measurements, calculate the parameters and calculate the purchase of materials. First of all, you will need a marker and a tape measure. All marks on the walls are placed discreetly so as not to leave marks upon completion of the work.

You can convert any closet into a dressing room - a diagram on paper will help you choose the type of structure to arrange. Sections for linen require a shelf height of 40 cm or less, and up to a meter in height for shirts. In the depths of the wardrobe there is a one and a half meter compartment for coats and fur coats. Sections for clothing should be small, you can count them by the size of your shoulders, adding 0.1 m on each side. The width is also determined according to the existing clothing.

Manufacturing of shelves and storage modules

A closet in its traditional sense is usually seen as a pile of things without order. A converted pantry space for clothing storage requires modules and shelves that you can make yourself. After measurements and drawings, blanks are made from wood or chipboard. They are sawn according to the scheme, while plasterboard is not recommended by experts due to its low strength. All edges are processed, edge design ideas are easy to find in the public domain.

A small clothes room does not require wide shelves - double-row placement of things becomes inconvenient with frequent use, so chaos begins. The depth of the shelves is considered ideally to be 0.6 m. It is convenient to arrange drawer pullouts and telescopic shelves. How to make shelves or drawers from sheets of material can be found in open sources.

How to create zones for different things?

A DIY dressing room from a closet photo is actually a kind of closet, where there are several zones - for large things at the bottom, for rarely used ones at the very top and in the center there are many shelves for daily wear. You can make a dressing room out of a pantry in two ways, the difference between them is in the organization of space. Zones can be horizontal or vertical.

The passive zone is shelves above two meters or near the floor. Heavy items, suitcases and seasonal clothes are stored there. In the active zone, up to one and a half meters in height, there are baskets with laundry, daily clothes, ties and trousers. The arrangement of the bar for long items is carried out at a height of 1.3-1.8 meters from the floor level.

Light and lighting devices

A do-it-yourself dressing room requires artificial lighting, which is necessary for the convenience of finding and trying on things. Such a system in a confined space is built from lamps on the ceiling or sconces on the walls. A rotating base would be optimal to direct the flow of light in the pantry.

Linear lighting from ergonomic LED lamps can be triggered by movement. A walk-in closet of 2 square meters is not too large, so you can make local lighting for each rod with hangers, and LED strips on the shelves will help you find the right thing without turning on the light.

The choice of door is made based on the size of the room and the surrounding interior. Among the models there are numerous door system options: coupe, accordion, even screens. The dressing room being equipped is of a separate type, so sometimes a screen or partition is enough.

Door installation begins with making marks, then fixing the guides in the opening or on the ceiling. First you need to level the door leaf, and then fasten it. They install the door mechanisms and adjust the guides at the bottom. General adjustment and installation of fittings is carried out. If the owner has guests, the canvas is made opaque to hide the contents inside from prying eyes. A do-it-yourself dressing room from a closet is often finished in the same color as the walls in the apartment.

Even if you create a dressing room from a storage room in a Khrushchev-era building with your own hands, then in addition to conventional storage systems and modules, you can buy ready-made modern devices. These devices allow you to fill the room as ergonomically as possible, making the space as efficient as possible.

Additional elements popular among designers are vertical shoe stands, with shelves that are slightly sloping, which minimizes the footprint. Transparent baskets and retractable hangers for small items can be installed in the lower compartments under the shelves. Storage of trousers and scarves, ties and other accessories will be optimal when the device is positioned vertically. It is allowed to place hooks on the door or one of the walls, at the ends of the shelves, on which you can hang bags.

Such auxiliary elements are especially effective in an apartment with a minimum square footage and allow you to competently use the room even if it is cramped. A wardrobe from a pantry in a panel house photo, thanks to the conversion of a dark pantry into a cozy clothing compartment, allows you to free up living space, add unusualness to the interior and maintain order among things.

a room with things is the dream of every woman. And this is understandable, because every representative of the fairer sex has a bunch of clothes that are in all the cabinets and drawers. But a wardrobe cannot be placed in every room, and not everyone can afford it.

If you dream of a dressing room and have a storage room in your home, your dreams are destined to come true. Such a wardrobe will allow you to rationally use space in other rooms and take on the main function of storing various items.

When choosing a place to place such a dressing room, you need to carefully consider all the details. If the room is too small, installing such a cabinet will be inappropriate, even despite modern materials.

If you are the owner of a Khrushchev building, there have been storage rooms there since construction. They can be enlarged or disassembled and made in a new way. If the layout of the apartments has been changed to separate the rooms, then there is usually space left that can also be used for a built-in wardrobe.

Features and advantages of installing a dressing room in a pantry

The cabinet can store tools and garden supplies

The main feature of the pantry is that it is different from a buffet, pencil case, shelving unit, or even a built-in closet. And speaking of capacity, storing any items is more convenient.

Before you start filling the interior, you need to think about what things it will be intended for. Storing clothes next to gardening tools and canned goods is not entirely convenient.

The wardrobe is designed for clothes and shoes. You can also store bed linen, mirrors, pillows and blankets here. If you make a separate niche or place, you can place small household appliances (iron, vacuum cleaner, ironing board, coffee machine (if not used often) and others).

Pantry can be used for kitchen equipment

If the closet-pantry will be intended for household goods, then it is better if it is located closer to the kitchen. Then you can place canned food, dishes and kitchen equipment here. And closed cabinets are suitable for tools. In the hallway or corridor you can place a storage cabinet for tools and household appliances for the home.

For home use, the design has many advantages:

1. Storing a large number of items in one area.
2. Rational use of space.
3. Proper layout will make it easier to find things.
4. Modular or grid storage allows you to use every millimeter of space, increasing the “usable” area.
5. Exclusivity. This design is always unique and unlike others. Based on personal preferences, you can create a unique and interesting design.
6. It is possible to store a large number of items for different purposes.

Regarding requirements

If you can’t allocate a lot of space, make a dressing room using many shelves and drawers of different sizes; they can replace a regular closet. Such a dressing room can take up more space than it might seem at first glance. But if you have a space of 1 or 2 square meters, then placing hanging rods and shelves there will not be difficult. If there is a little more space, then a large mirror for changing clothes will be conveniently located.

When creating a dressing room in a small apartment, pay attention to the main rule: the presence of ventilation. If you neglect this rule, items may become damp and absorb mustiness. Don't forget about lighting.

Before filling out the “inside” of the wardrobe, make a diagram of where, what and how it will be located.

1 2

Varieties

Wardrobes in closets are divided into several types based on their functional purpose. There are structures for storing clothes, kitchen utensils, tools and household items.

Also, the division occurs depending on the location:

1. Niche. Dimensions are no less than one and a half square meters. Due to the sliding system it is separated from the main part of the room.
2. Dead end. If there is a dead end in the hallway, you can fence it off with particle board or plasterboard and install a door.
3. If you own a Khrushchev house, there is already a storage room there that can be converted into a wardrobe. Disassemble all the “internals” and fill as you need.
4. If the room is square, you can make a corner cabinet with a round or straight front.
5. In a rectangular room, a blank wall is used for a wardrobe.
6. In two-story private houses or apartments, space for a storage room/wardrobe is allocated under the stairs.
7. Rarely do they use space on a loggia or balcony to create a wardrobe.

Scheme for changing a storage room in an apartment building

Before work, you need to consider the contents and dimensions

If you have finally decided to make a wardrobe out of a closet, you need to carefully consider the final appearance of the structure and depict it on a diagram, indicating the dimensions. You can use ready-made photos taken on our website and make your own edits if necessary.

Most often, the pantry occupies approximately 2-3 square meters. It is difficult to choose furniture for such a space, but a closet-wardrobe can handle storing a large number of things. Think over and draw a plan for the internal filling, indicate the dimensions and you can start creating it yourself.

Internal rational content

To ensure rational placement and storage of items, you need to correctly plan what and where will be inside. To a greater extent, such structures are equipped with sliding systems. This allows the occupied space to be used to the maximum. And the niche of such a system can hold a pantograph or shoe nets. The simplest option is to divide it into two parts and fill each part from top to bottom.

Middle part of the closet

The middle part is the most loaded

It is used more actively than others. Everyday items, those that are used most often, are stored here. It is better to fill this part with a hanging bar, wide shelves and drawers. The rods can be placed either along the cabinet or across it, depending on the depth of the wardrobe. It is better to place the drawers so that they can be seen immediately when opening the cabinet. A rack can be used. This filling will provide convenient storage for any items.

Top of the pantry

Rarely used items are stored on the top shelves

This place, like in an ordinary wardrobe, rarely used items are stored. If the wardrobe is too tall, a chair or ladder may be needed. By making the shelf a little lower, you can place bed linen, blankets and pillows, and even lower - hats. If the size of the pantry allows, the upper shelves can be closed.

Making your own wardrobe from a closet

How to make a closet out of a pantry at home? You need to start working by freeing up space. It’s better not to demolish the walls. Remove everything inside, including shelves. When only the walls remain inside, you will notice that there is a lot of space there. If the pantry is many years old, then cosmetic repairs will not harm. Leaving the “room” in its original condition is not advisable; the whitewash can crumble and stain the things that will be inside.

Level the floor and walls. Check the levelness using a building level. This is necessary so that the “insides” are located evenly. Painting the walls or additional finishing is not necessary.

It is enough to use water-based whitewash and lay wooden boards on the floor, because the main thing is that the dressing room is sufficiently ventilated and the walls allow air to pass through, otherwise there will be high humidity in this room and things will be “saturated” with dampness.

Wood flooring is quite expensive. If you don’t have the funds for such a purchase, you can use laminate flooring and put bags of salt or a substance that absorbs moisture well in the corners.

Regarding ventilation and lighting

Ventilation holes are needed to keep things properly stored, and light will visually increase the space.

The dressing room should have good lighting

To avoid the appearance of moisture and dampness, and then mold and mildew in the dressing room (after all, most often it is closed), you need to consider a ventilation system. In a small pantry there is simply no point in equipping a whole system, but if the dressing room is the size of half, or even an entire apartment, a whole system is needed.

If your closet is small, install a small exhaust fan. Conditioner can be used. Such devices will clean the space from germs, dust and moisture, thereby eliminating the likelihood of odor and fungus. If we talk about light, to visually increase the space in the pantry you need to approach the lighting system correctly.

If the room is small, get rid of oversized shades and lamps with patterns, otherwise shadows will take up part of the space. Give preference to small lamps. It is better if there are 5-10 of them, which are evenly distributed around the room. They can be mounted both on the ceiling and on the walls.

Installation of internal filling

First you need to purchase filling parts, which were thought out in advance and indicated on the drawing. The most common is the presence of:

• metal pipes. Acts as the basis of the frame and as a rod for hangers;
• coated chipboard is suitable for shelves and drawers;
• guides;
• self-tapping screws, bolts, screws, nails, confirmations and metal corners for fastening;
• hooks/handles.

We start by cutting the metal pipes to the required size. We prepare and install the racks, securing them with self-tapping screws. We position the guides and mount them. Let's start installing the “internals”. If necessary, we provide lighting and ventilation. We install the door and screw the handles.

The doorway can be designed in several ways:

1. Swing design. Suitable for placement in a spacious place as it requires space to open.
2. Screen-partition or thick curtain. Doesn't take up much space and looks interesting.
3. Sliding system. Reminds me of a wardrobe. Suitable for installation in a small room. Doesn't take up space.

Let's sum it up

If you have a closet, your wardrobe dream will become a reality. By combining imagination and patience, you can create the exclusive furniture that you have wanted for so long. A walk-in closet is the best way to free up space in other rooms. No need to look for specialists. You can do this option yourself.

Probably the most convenient device for storing things is a dressing room. After all, it’s really great when all the details of the wardrobe are in one place and you can immediately assess how well the set you’ve just chosen fits together, rather than running from room to room - take it, try it on, look. Moreover, you can make a dressing room in a very small area: the minimum is 1.5-2 square meters. EVEN in a small apartment it is possible to fence off such space. Moreover, it has been noticed that it is more convenient to use them if the dressing room is assembled with your own hands. It's simple: no one knows your habits better than you and can put things in the right order. So, let’s start creating our own dressing room.

Wardrobe sizes

Our realities are such that most people live in small apartments, where every centimeter counts. Therefore, issues of size often play a decisive role. The smallest dressing room can have an area of ​​1.2 - 1.5 square meters. meters. It is a rectangle with sides 1.5 * 1 meter or so. Also, a small dressing room can be corner - this option is even more spacious than a rectangular one of similar size: with an equal area, the length of the sides on which shelves and storage systems can be placed will be greater.

The smallest dressing rooms: 1.5 by 2.5 m and 2 by 2 m

A rectangular mini-dressing room should have a width of at least 1.2 m when things are placed on one side, and at least 1.5 m when placed on both sides. The depth should be such that it is possible to “enter” there. This is what mainly distinguishes dressing rooms from sliding wardrobes, and also the ability to install any doors.

Ventilation and lighting

Even in mini-dressing rooms, and even more so in large ones, ventilation is necessary: ​​in a closed room, a musty smell quickly appears, which no perfume can mask. Therefore, even when planning, find a way to make ventilation in the dressing room.

The principle of its design is no different: in the upper part of any of the walls, preferably further from the door, an exhaust hole is made into which a fan is inserted. The inflow is provided either into the gap under the doors or into special inlet openings located just above the floor level. They are closed with decorative grilles. The outlet of the ventilation duct should be into the general ventilation system; you can use plastic boxes to take it outside or under the roof of a private house. Air exchange organized in this way effectively maintains the normal state of things.

Principles for organizing ventilation of a dressing room through a bathroom

When choosing a fan, you should pay special attention to the noise level. Since dressing rooms are often located in or close to bedrooms, noise should be kept to a minimum. It can be controlled automatically or turned on/off using regular or.

The lighting should be bright. Firstly, this is necessary to quickly find things, and secondly, dressing rooms are often used as fitting rooms to immediately see how well the selected items fit together. The mirror is usually placed on the door or mirrored doors are made. In this case, the light should be directed not only to the shelves and storage systems, but also to the fitting area.

You can use lamps of any type, but it makes sense to make them turn on from motion sensors. They opened the doors - the lamps came on, there was no movement, they turned off. There is another option for swing doors: there are lamps with buttons that light up when the door is opened and turn off when they are closed.

Where to do

Even in small apartments there are “appendicitis” that cannot be used normally. This is where you can make a dressing room.

Another popular option is a pantry. In this case, everything is generally simple. You remove everything unnecessary, change the doors and install the appropriate content: racks, racks, baskets, shelves.

If there is nothing like this in the apartment, they fence off part of the room - the end or the corner - you need to look at the layout. The good thing about a corner dressing room is that it allows you to use the most difficult areas to arrange, namely the corners. Especially if there are closely spaced doors in two adjacent walls. This zone is considered “dead”: you can’t put anything there except a small corner shelf: everything will get in the way. About the same option - two windows or a window and doors.

If the area turns out to be too small, it is possible to increase it a little, making the wall not flat, but with the middle extended slightly. This will not reduce the area of ​​the room much, but much more things can fit.

They are also made on the loggia - by making part of the glazing opaque or by building a wall. Only here you can’t do without insulation - it’s unpleasant to wear cold clothes in winter.

The second option is suitable for wide loggias. In them, shelving can be placed along a long wall.

In the corridor or hallway, a corner or “appendix” is also fenced off, if the layout allows. Here everyone can decide only by location: there is a place for this or not.

A dressing room is most appropriate in the bedroom. This is simply the best place to store things: in the sense that it’s more convenient to dress here. Therefore, for these purposes, part of the room is fenced off. In this case, this technology has long been known and worked out to the smallest detail. It won’t take much time even if you have no experience: a maximum of two to three days for assembly and finishing.

If you make a partition from gypsum board or gypsum board according to all the rules, you will need double cladding, and this will “eat up” centimeters, or even meters, of area. Therefore, most often they are sheathed only on the outside, but in two sheets with overlapping seams. When assembling the frame, do not forget to make reinforced racks for fastening the door. With single cladding, exposed profiles remain inside, but it is convenient to hang shelves-baskets for things on them. If you plan to do this, then take them with a thick wall so that they can hold the weight properly.

The partition can be made from or slabs. This is an option for those who do not like to bother with putty. But you need to choose a lamination that will fit into the interior without any problems.

Doors for dressing room

What’s great about a DIY dressing room is that you can install any kind of door: sliding, “compartment” type, accordion type, regular hinged, hinged on rollers. You can even get by without them at all. This option is called a wardrobe-rack, but then everything will have to be kept in perfect order: everything is in sight. The most budget option is thick curtains or something like a Japanese curtain.

If the front wall is large, part of it can be stationary, and part can be occupied by doors. In this case, you can also somehow use it on stationary walls. If desired, the doors can be made full width, or consisting of fragments.

Option for a dressing room in the attic: a side part with a low ceiling is occupied for it. Full-width doors make it easier to get to things

The design can be anything as long as it fits into the appearance of the room. If desired, they can be made to match the walls so that they are not visible, or they can be bright and conspicuous.

Arrangement: filling and storage systems

If the area is limited, there is no point in making furniture from wood, MDF or chipboard into the wardrobe. They take up precious centimeters of space and also interfere with air movement. Another disadvantage is that redoing something is problematic.

“Standard” type furniture takes up too much space

Recently, the general trend is the installation of lightweight metal storage systems. They are modular and assembled on special racks. Racks can be attached in two ways - to the walls or to the ceiling and floor: different manufacturers make different systems. And everything that is needed is hung on these racks.

The racks can have notches along the entire length, which makes it possible to install any element at any height. These are the most mobile systems that can be modified easily and simply - simply by moving them from one row of notched hooks to another, arbitrarily changing the height of the shelves and baskets, and other elements.

There are racks of rectangular cross-section, with grooves cut on both sides. The necessary components are attached to the clamps in these grooves.

Please note that there are different shelves and drawers - made of wood or wood materials, metal - chrome-plated or painted. They can be retractable, they can be placed one on top of the other or on shelves.

All these systems are sold: racks and a list of various components. But they are produced mainly in European countries, so the price is high. An economical option for dressing room equipment can be made independently from a round chrome-plated furniture pipe and various fasteners for it. It turns out that this furniture is not as mobile as we would like, but it costs significantly less.

Devices for placing clothes

In addition to standard and not so standard drawers and shelves, there are interesting special options. For example - skirts or trousers. Special guides on which the transverse strips are attached, sometimes they have clips. They allow you to hang your skirts/pants straight and not be afraid that they will fall. It is convenient if such a hanger extends, allowing you to inspect all the contents.

One of the options for filling a dressing room is a bracket for skirts or trousers

This device can be replaced with a simpler one, but much cheaper - a hanger with crossbars located one below the other. It's not as convenient, but it allows you to organize your clothes just as well.

There is a retractable design for ties, only it is usually oriented differently and extends out in length, although not everyone likes such a system, but prefers folded drawers into cells.

There are several ways to place hangers. The simplest are pipes, the more economical (in terms of space use, but not in terms of money) are tie-like retractable brackets.

Another device is a pantograph for clothing. This is also a pipe, but capable of descending. A kind of lift for clothes. This device allows you to use the space right up to the ceiling, without compromising your comfort. It can be attached either to the side walls (a more common option) or to the wall. There is a handle-bar attached in the middle of the pipe, by pulling which you lower it to a horizontal position. The carrying capacity of such devices is usually small (up to 18 kilograms), so they are used for lightweight clothing.

Furniture pantograph - for light (by weight) clothes

Shoe storage systems

Problems often arise with storing shoes: some people have dozens of pairs of them, so it’s time to arrange separate dressing rooms for them. But among the standard sets of equipment there are several interesting ones for storing shoes.

Let's start with the retractable system. IKEA has it. Pins with shoe modules mounted on a movable frame. Convenient, compact.

There are mini chests of drawers that do not take up much space, but are hung on the walls, and there are hanging organizers that can be easily placed on a horizontal pipe.

These are mini chests of drawers on the wall

In general, there are many interesting ideas for shoes that allow you to place them compactly and at the same time conveniently. Some are in the fogo gallery.

Such “rotating” boxes are very convenient not only for shoes, but also for small items and linen. A way to store boots is on hangers with clothespins

There are very inexpensive options. For example, the seasonal one, which is currently in use, can be stored on a grid with rearrangeable hooks or wire shelves. You've probably seen similar ones in stores. This is a mesh or perforated panel on which hooks/shelves are hung. Convenient: you can move it under any type of block, make the distance larger or smaller.

An economical option for storing shoes - a mesh with hooks and shelves

Hanging such a grid is not a problem - even on a wall, even on the side surface of a cabinet or door. Hooks and shelves simply cling to the crossbars. This option is ideal if you are short on money and space. If you like the idea but need something more presentable, make or find a perforated metal shield on the frame. Hooks are also inserted into it with a bang.

Modification - shield with hooks

In general, when arranging a dressing room and on a limited budget, you should look for storage systems not in furniture stores - online or offline. It’s better to look at sites that sell commercial equipment. There are many interesting devices that save space: stores also try to display the maximum amount of goods in a minimum area. For example, these are shoe racks.

If you attach wheels to the first one, you get an excellent retractable system. The price of such equipment is much less than similar equipment, which is sold in furniture stores.

Making a dressing room project

As you can see, there are a lot of ideas for equipment and storage systems. But so that it doesn’t turn out that the great thing you bought simply doesn’t fit into your wardrobe, you need to draw a plan on which to indicate all the dimensions and dimensions. It is drawn to scale, then you mark on it those parts that must be present. They are drawn to the same scale. If everything “fits in”, armed with the dimensions (you have them, or you can measure them in the drawing and, using the scale, calculate the real values), you can go to the store to choose systems.

There is another approach. Find out the dimensions of the devices and systems you like (installation dimensions), cut them out to scale from cardboard or thick paper and try to combine everything. If it works, great, you can buy it. No - look for other options. As a result of your efforts, you should end up with a layout approximately like the one in the photo.

To make it convenient to use the equipment and get things out, you must maintain the following distances:

• minimum distance from shelf to shelf:
  • when storing things - 30 cm;
  • when storing shoes (without stilettos) - 20 cm;
• shirts, jackets, jackets - 120 cm;
• trousers:
  • folded in half - 100 cm;
  • length - 140 cm;
• compartment for outerwear - coat - 160-180 cm;
• for dresses - 150-180 cm.

At the very top we reserve space for clothes from a different season or rarely used items. There is often space for a vacuum cleaner at the bottom, and a built-in ironing board is installed in one of the cabinets.

For those who like to work with their hands, here are several diagrams with dimensions so that you can equip your dressing room with your own hands (at least partially).

Drawing of a shoe rack with dimensions

Shoe storage system made of plastic pipes…