Finishing the facade with plastic to look like stone. Stone-look facade panels for exterior decoration of the house. Plastic facade panels imitating stone - their advantages

We will send the material to you by e-mail

Ventilated façade systems use façade panels to exterior finishing home from different materials with different formats and mounting methods individual elements between themselves. They are hung on frames made of bars or galvanized profiles, imitating natural wood, natural stone or facing brick.

Exterior facade panels

Review of types, characteristics, brands

Facade panels for exterior decoration of a house are classified according to several criteria:

If it is necessary to simultaneously insulate + decorate the facade, the subsystem (profile or block) is attached to the wall with brackets after insulation of its outer surface. This is necessary to eliminate cold bridges.

Helpful information! Laying basalt wool or extruded polystyrene foam inside the sheathing cells is a violation of technology. If only improvements to the building's exterior are required, the sheathing can be fixed directly to the building envelope without brackets.

Metal

There are façade panels made of aluminum, stainless steel, and galvanized steel. Unlike budget linear panels used for finishing industrial buildings, sports complexes, siding, cassettes have a more noble appearance, lamination, 3D texture.

Even with double-sided coating polymer materials steel panels are subject to deformation, accumulate static electricity, and require thermal insulation. Aluminum does not have the last two disadvantages, but is much more expensive.

Polymer

Of all existing polymers for external cladding PVC (vinyl) is usually used. There are two types of façade vinyl panels for home exterior decoration:

• basement siding - rectangular modules measuring about 120 x 50 cm, imitating stone/brick;

Manufacturers provide a wide range of additional elements that allow high-quality decoration of abutments, cornices, ebbs, and slopes of cottage openings.

Composite

Range composite panels, used for decorating facades, are much wider:

• fiber cement – ​​the filler is cellulose (up to 90%), which allows you to perform front surface decorative embossing;

• porcelain stoneware – slab sizes 1 x 1 m – 1.2 x 3.6 m, the material can be cut with a glass cutter, it is environmentally friendly, inert to solar ultraviolet radiation and household chemicals;

• aluminum composite - price per square meter from 1000 rubles, fastened with rivets, can have a wave or flat surface front side;

• clinker - has a layer of insulation, has a maximum service life, but unnecessarily loads the load-bearing structures.

Composite material is always more expensive, however, it has a high service life and original design.

Glass panels

Original translucent panels are laminated, reinforced or hardened, obtaining high vandal resistance or dust resistance. This material has light/visual effects (opacity, haze), usually used for finishing ground floor half-timbered

Helpful information! Glass panels should not be confused with systems façade glazing. Finished enclosing structures are sheathed with these materials. Independent walls they are not.

Sandwich

In private construction, prefabricated and monolithic sandwiches are used extremely rarely. This material is structural because when polyurethane foam/expanded polystyrene is pressed between two profiled sheets, the slabs obtain sufficient rigidity.

They build from them sport complexes, hangars, warehouses. Prefabricated sandwich buildings can be dismantled for transport to a new location.

Related article:

Installation features, advantages and disadvantages

Facade fiber cement panels for exterior finishing of a house, the photo of which is presented above, are attached to the subsystem sheathing with clamps, like most other claddings with a thickness of 16 - 25 mm.

For thin-walled decors, a riveter is used (only on steel profile) or self-tapping screws, nails on bar sheathings.

Helpful information! Rigid fixation is only allowed for materials with low linear expansion. In other cases, it is necessary to ensure one degree of freedom during horizontal movements.

Thermal panels have a layer of insulation that must be placed in close proximity to the wall. Therefore, they must be glued to the enclosing structures without air gap. In sandwiches, the heat insulator is located between metal sheets, therefore they are used as wall material.

A budget option for decorating the exterior of a cottage is plastic facade panels for exterior decoration of the house with an outer layer that imitates natural material.

To increase the service life of the ventilation façade, they use composite materials and metals.

Real stone houses today they have become a rarity, since their construction is quite labor-intensive and expensive. But modern news construction industry offer many options exterior finishing buildings using innovative materials. The use of “stone” facade panels will be an excellent alternative to the usual methods of cladding buildings.

Plastic panels can be one- or two-layer, in the second case it is used environmentally friendly filler. Both smooth and rough surface. The variety of textures and available shades makes the material universal. The lightness of the slab, its resistance to weather conditions, immunity to corrosion and rotting are undoubted advantages.

The ability to replace individual blocks and affordable prices ensure a growing demand for this type building materials. But the fragility of plastic is weak insulation characteristics a single-layer option may turn out to be significant arguments against the purchase. Optimal choice there will be combined, or two-layer panels: polystyrene foam or polystyrene foam are considered effective insulation materials. A decorative possibilities modern PVC practically unlimited.

Panels with a base made of aluminum or galvanized iron are indispensable in extreme conditions. They are durable and resistant to fire. The weight of such sheets is greater than PVC. After a special technological processing the surface of such panels acquires a texture close to the appearance of stone or brick.

Protective polymer coating provides durability color design. Such plates are resistant to mechanical stress. But metal does not contribute to the creation optimal microclimate: Heats up quickly and cools down instantly. Therefore, additional insulation will be required.

Today, the trend is fiber cement modifications stylized to resemble different types of stone. The panels belong to the segment of medium-strength materials. They are heavier than PVC, but much lighter than metal. Special care is required when installing and cutting such slabs. There are special variations on sale with a coating of natural stone chips. This retains heat well and protects against noise penetration.

The consumer can choose stone-look facade panels according to the expected load and operating conditions. Pricing policy is also important, but in any case, cladding the building “in stone” will be quite economical and presentable. Such materials have become an excellent alternative to expensive finishing with natural minerals.

Advantages of panels, common texture and formation of material costs

Panels imitating stone remain one of the most decent options façade design. Experts note their wear resistance, environmental friendliness and immunity to corrosion. The fire resistance and lighter weight of most slabs are also attractive. This will be done quickly, installation without “wet” work is carried out at any time of the year, and the bases do not require special preparation.

The appropriate design is suitable for both private cottages and high-rise buildings or office buildings of different floors.

The design of the panels will please many stylists - in special cases you can even order special copies. The most popular modification on construction market What remains is a neat imitation of rectangular stones laid in rows.

For non-standard forms the “rock” view with many elements is often used irregular shape, the basement parts of the house are created from imitation of a granite surface. Depending on the architectural features you can choose a stylization for medieval castles, alpine houses, or copy the design of ancient buildings.

Manufacturers of status brands offer variations of panels that replicate slate, limestone, sandstone, marble, and shell rock. Less common are variations of recreating the structure of malachite, onyx or topaz.

This type of finish is characterized by a wide range of colors. Especially loved landscape designers and architects all shades of beige, brown and futuristic combinations of white, black, rich burgundy.

Price facing material simulating wild stone, directly depends on the initial components and additives, including polymer ones, which ensure sheet strength and color fastness - therefore, before purchasing, it is advisable to study the certificate and take into account warranty obligations manufacturer.

The presence of insulation and the thickness of the base layer are also important. But with other identical data, the products famous brands It will be much more expensive. IN in this case The choice is up to the buyer: to trust a little-known brand that indicates acceptable characteristics, or to purchase a “famous” product.

Features of installation work

Stone-look facade panels require simple installation, which can be quickly carried out by a team of specialists, or can be accessed by passionate craftsmen. If you decide to cover the house yourself, then you should carefully study all the instructions so as not to lose the warranty on the material by accidentally violating the technology. When calculating required quantity panels should be added by about 10%, and if you plan to use elements with a complex configuration, then 15%.

Careful marking of the original surface using a level, square, pencil or chalk is required. The sheathing is cut using a saw with a fine tooth or a hacksaw; you can use a grinder with an appropriate disc. The frame is created mainly from a metal profile, but sometimes it is possible to use wooden beams.

It is better to fasten the panels with self-tapping screws, tightened with a screwdriver. The first sheet is installed in the lower left corner, then work is carried out from bottom to top and from left to right. Each subsequent slab is mounted on the previous one. Rulers different manufacturers equipped with fastening locking connections or grooves to form a tight joint.

Sometimes when perfect walls At home, the panels are fixed without lathing with special mastic. Coverings on the corners, as well as additional canopies and shutters serve as camouflage and decorative elements.

Modeling different types stone surfaces using high-quality panels is very convenient: all types of this building material undemanding, economical throughout their service life, and retain their original appearance for decades. Stone-look facade panels will create a special image and add an aesthetic appearance and respectability to any building.

Once faced with the need to decorate the facade own home, and having at the same time an extremely limited budget, I decided to consult with friends who had already gone through this. Imagine my surprise when three out of five respondents recommended one well-known resource.

From the very beginning I considered it as a finishing material, only façade siding, he looks, of course, banal, but he didn’t count on more with his finances.

I went to see it, and to be honest, I was amazed, but first things first.

Types of facade panels

It turns out that siding is not only straight stripes on the walls of a house, but also a whole catalog of various imitations.

• Tree.
• Wild stone.
• Brick.
• Granite.
• Marble.

We especially liked plastic panels under a stone. I, as a non-specialist, did not even immediately determine that this was an imitation.

Cladding a house with natural stone has always been a pipe dream, but its price sometimes exceeded the cost of the house itself. Having walked around the expanses of sites, I discovered several very important points, after which there was no doubt about the choice.

• Appearance. It is possible to distinguish façade panels from natural stone only upon closer examination.
• Acceptable price. Compared to other types of finishing, stone-look facade panels turned out to be several times cheaper.
• Easy installation. After looking at the installation instructions on the website, I realized that I could do it myself.
• Durability. The production of facade panels from hard vinyl implies their service life of at least 30 years. When used in the harshest climatic conditions.

I found a calculator at dom sidinga, did some simple calculations, and it turned out that final cost even lower than what I originally planned. And it’s not just the cheapness of the material, the price was significantly affected by the fact that I will be doing the installation myself, and the fact that it turns out that I don’t have to put insulation under the façade panels!!!

There are two types of facade panels:

1. Single layer.
2. Multilayer.

The first option, of course, is cheaper, but it requires the installation of insulation, and the production of multilayer facade panels implies the presence of a layer of polyurethane, which acts as heat and sound insulation.

Having compared all the pros and cons, I highlighted the beneficial advantages of multilayer panels:

• When finishing with your own hands, no installation required additional layers heat, hydro and sound insulation;
• Installation is possible at any time of the year and at any temperature;
• Completely insensitive to moisture;
• More high density facade panels almost completely eliminate temperature deformation;
• The polyurethane layer can withstand a large number of freezing and defrosting cycles.

In a word, there is no doubt left. I refused the services of builders, since I still decided to do everything myself, so I simply ordered delivery of everything I needed on the Internet, and started work the very next day.

Features of facade panels and installation

I was pleasantly surprised by the fact that to install plastic facade panels with your own hands, you do not need any special tool, almost everyone has everything they need at home:

1. Roulette
2. A hacksaw, preferably with a fine tooth, for cutting siding
3. Drill with impact mechanism. And if the house is wooden, then without it
4. Screwdriver. (you can get by with a drill)
5. Building level

First of all, it is necessary to treat the walls with soil, which will protect them from fungus. Next, we make a sheathing that will hold the siding on. At first, in order to save money, I wanted to put it on the sheathing wooden beam, but specialists from the site explained that there is practically no difference in price between timber and a metal profile, since wood requires additional processing impregnations.

First, using a drill, we attach the holders that will fix the profile to the wall; it is important that they are positioned strictly along the vertical line over the entire height.

Advice: at the stage of lathing production, you need to check the level as often as possible, since crookedly installed guides will create a lot of problems during finishing.

The distance between the guide profiles should be 30-50 cm, and the step between the holders should be up to 1 m.

The guides can be mounted at a very minimal distance from the wall, since multilayer facade panels do not require insulation; the distance is only necessary for free air flow.

The next stage of production is the actual installation of the façade panels. Even before I decided to do the finishing of the facade with my own hands, I was convinced that the panels were attached first, and then the decorative plastic corners and everything else were attached to them. But after reading the instructions on dom sidinga, I learned that you need to start from the corners and joints of the panels.

Having secured the corner panels with self-tapping screws, we measure the distance between them; if it is more than 3.4 m, then at this distance you need to install an H profile, which connects the two panels in length.

Sometimes, for greater aesthetics appearance, The H profile is placed exactly in the middle of the house. In this case, you will have to cut each panel to length, and the consumption will increase slightly, but the vertical line will run in the center and will fit well into the overall look.

If everything is ready, we mount the starting panel, it is located at the very bottom and all the rest of the finishing will come from it. In cases where the foundation does not protrude beyond the walls, finishing is carried out from the ground itself. This is not recommended; there is a special siding for the plinth that has more durable characteristics.

Important: the starting panel must be clearly level, since a misalignment of just a few millimeters will greatly affect the finishing stage.

After the starting façade panel has been installed, the simplest step remains - installing the siding. To do this, take the panel and, bringing its edges into the corner and H profile, engage the lock with starting bar, then we fasten the panel with a self-tapping screw into a special oval hole so that the cap is in the middle of the oval.

Important: when tightening the screw, you need to make sure that it does not press the panel. The siding should seem to hang on a self-tapping screw.

In this way, all siding segments are assembled and fixed under the roof with a finishing panel.

Home decoration facade panels completed, now the room will become much warmer, and the house will take on a new face.

Conclusion

Stone facade panels for a private house

By the way, it took me two days to finish the entire house with my own hands, and this taking into account the fact that I had never dealt with facade panels before. Of course, many will say that natural stone cannot be compared with anything, and I probably agree with this. But often, it's a question of price finishing materials, plays key role when choosing them.

Moreover, not everyone can do the finishing with natural stone with their own hands; it requires special skills and a set of tools. There are no such problems with siding, and this puts it a step above its competitors.

When renovating a house, one of the important stages Exterior wall decoration is considered. Quite common now modern materials that decorate the house. Moreover, they are not only decoration, but also serve as protection from various negative factors external environment. And almost all building materials for facade finishing the houses exhibit a thermal effect and have good sound insulation.

Wide choose

The construction market will offer a lot of options for cladding facades, and they will all differ in their properties and prices. For example, panels from natural materials will cost an order of magnitude higher than panels made from artificial materials.

Metal

Panels are made of aluminum or galvanized steel. The surface is also made either perforated or smooth. Metal panels have a protective coating. On 1 square meter the weight of the panels will be about 9 kg, that is, the load on the foundation should be taken into account. It is important to note that metal ones belong to.

One of the finishing options is sheet wall panels for the bathroom, a description of which can be found in this

Aluminum panels are considered the lightest. And the advantage of steel panels is that they react very well to strong temperature changes and can be used in extreme conditions for our altitudes. Advantages of metal panels:

• durable - service life is about 30 years;
• waterproof;
• can freeze and thaw about 50 times;
• fireproof;
• not affected by corrosion.

This finishing option as wall panels for decorating a corridor can be seen here

Find out more about wall panels under brick for exterior decoration can be found here in this

Sandwich samples

If you are faced with the task of not only decorating the walls of your house, but also insulating it, then you should take a closer look at sandwich panels. They contain several layers of insulation. It also contains a vapor barrier layer, plastic and metal. Panels of this type tolerate temperature changes well and have good sound insulation properties. To select a suitable sandwich panel you need to know. Panels are usually secured using self-tapping screws. But if the base of the wall is concrete, then you should turn to dowels. Advantages:

Disadvantages of panels:

• vulnerable during installation and further operation;
• Damage to the coating occurs due to careless handling;
• freezes at the joints if the temperature drops below -20 degrees.

You can find out what sizes of MDF panels for walls can be used in construction or renovation.

PVC

The second name, which is more widespread among the masses, is. It is often used when decorating the inside of a house.. This is justified by the fact that it is easy to use and easy to clean. Even with exterior decoration, it fully justifies itself. It is frost-resistant, at high and low temperatures not deformed. If you want to use regular PVC wall in exterior decoration, then ultimately this will lead to the fact that they simply will not withstand exposure to ultraviolet radiation. Therefore, they are now producing lining that is resistant to exposure to the sun. This is done by adding some components and coating with varnish.

Ecopan

Ecopan - sip panels. Usually the building is constructed entirely from this material. They consist of particle boards, their thickness is no more than 10 mm. The composition includes polystyrene foam insulation. There are a lot positive aspects ecopana. First of all, this is the price. Houses are built from such panels in many countries. What other advantages does ecopan have?

Decorative

This type of panel is common and has a lot of finishing options. Separately, you can choose for interior decoration.

1. Under the brick. By treating the walls with brick panels, you can look at your home in a new way. Such material speaks of your good taste. But you should know that such material will cost you quite a lot. The panels themselves are expensive, plus you need to use material for installation and the work of a craftsman. If you compare decorative stone and panels, then, of course, the panels will cost you much less. You can only find any differences if you get close to the house. From a distance, no one will notice that the walls are lined with panels. There are two types of panels: with a combined structure and homogeneous. The combined structure has a layer of insulation. Usually it is polystyrene foam. Facade panels are fastened using hot joints. In this case, it is more effective than glue. The advantage of panels over brick is that they can be laid in any weather conditions. And about how it happens interior decoration read our article.
2. Under the stone. When using natural brick for decoration, know that you will need a good amount of money. Therefore, brick panels will be good option for replacement. Your home will look very expensive and beautiful. Their characteristics are similar to brick panels. Combined panels also have a layer of insulation, the second layer acts as decorative element. The panels can be laid using special glue or at metal cladding. Wherein metal profiles needs to be installed in advance. The price of the panels will depend on the thickness of the panels, color, and the material from which they were made. The weight of the panels is very small, and you can install them yourself.
3. Clinker. The main component becomes clinker tiles. The tiles were originally made for laying sidewalk paths. But during the observation process, it was noticed that it is durable, tolerates temperature changes well and retains heat. Soon they began to use it for finishing facades. Such panels are good at preventing the appearance of mold and mildew.



Base due to various colors and textures can be made very attractive and interesting. During installation, it is worth considering that you need to make additional thermal insulation and waterproofing. When laying panels, do it at a temperature not lower than 0. Only self-tapping screws or nails will help with installation.

Manufacturers




The video shows insulated facade panels for exterior finishing of the house:

When using facade panels you will give it a second life. It will become attractive and stand out from the crowd. You can choose panels that match the texture and color of your home. You can also choose the price that suits you.

Facade finishing with panels

from 680 rub./m2

Finishing facades with plaster

from 350 rub./m2

Finishing facades with artificial stone

from 1250 rub./m2

We offer finishing of the facade of the house with panels at a cost of 680 rubles/m2 (10.2014). Our specialists select best materials For external cladding a wide variety of objects. You quickly get a beautiful, warm and durable facade. Call, find out current prices and order turnkey finishing!

Paneling

Finishing work

• Our specialists inspect the facade and dismantle elements that interfere with the work.
• Craftsmen prepare the base for finishing: remove loose coatings, remnants of paint or other old materials. Cracks and damaged areas are repaired.
• The surfaces prepared in this way are treated with a primer, which protects the walls from fungus and strengthens the base of the facade.

Note! We attach the panels directly to prepared walls or installed sheathing. The frame is made of metal or wood. In the example below, the walls were level, so our specialists attached the panels directly to the base of the facade.

• Installation work begins with marking out the horizon line along the perimeter of the building.
• The base profile is attached using this marking.
• Installation begins from the corner of the house. For this, masters use corner elements. In their absence, ordinary panels are used. To do this, carefully cut the edge of the element at an angle of 45 degrees. This joint looks invisible.
• We fasten the panels using kits for quick installation on brick foundations. You must first drill mounting holes in the panels.

Drilling holes in the façade panel and installing it

• We also use adhesive mixtures and polyurethane foam to install panels.
• After installing the first row, specialists perform work in the same sequence. New element installed so as to neatly align it with the fixed panel. We monitor the quality of the insulation joints and perform additional fastening of the panels using dowels.
• During the cladding process, our specialists treat the joints of the panels with polyurethane foam. This ensures a tight connection. After completing the installation of all facade panels, the joints are rubbed with a special frost-resistant mixture.

Execution of work

Tips from the experts: benefits of using panels with clinker tiles

1. You save on wages for specialists, because at the same time as performing facing works The façade is being insulated.
2. When installing panels on the frame, craftsmen equip a ventilated façade - the most effective solution V modern finishing buildings.
3. Work is carried out in any weather conditions and sub-zero temperatures.
4. You get a durable façade that requires no maintenance. The surfaces of the clinker material are resistant to ultraviolet radiation.
5. No reinforcement of the foundation is required, while the low weight of the façade panels creates minimal additional loads on the structure.

We use all types of modern facade panels, for example, Döcke products are very popular.

Summary

Choose best quality from professional performers. We guarantee years of trouble-free operation of the new façade. Call, find out prices and order finishing the facade of your house with panels!