Origami for beginners tank diagrams. Origami tank: assembly diagram for a modular toy. How to make a paper tank with a rotating turret

With this article you will learn how to make a paper tank with your own hands. This instruction includes 2 options for making such crafts. They vary in complexity and technique. The first master class is quite simple and quite suitable for beginners. The second is labor-intensive and complex. If you don't have any experience with origami, try a simpler one first.

A paper tank sounds quite serious. It seems that making such a craft is very difficult. And this is not true at all! Given some free time and some patience, you can easily create one. Read on and you will learn how to make a paper tank with your own hands.

Materials and tools:

• plain or colored A4 paper;
• gray pencil;
• thin metal ruler;
• PVA or stationery glue;
• scissors.

How to make a simple tank out of paper

This craft is easy to make and perfect for beginners. To make it, you will need one sheet of A4 colored paper, a small piece of paper in a contrasting color, scissors and a pencil.

Production time – 20 minutes
Difficulty level – easy.

Step 1: Make the folds
Take standard sheet A4 size paper.


Fold it in half lengthwise.


Fold the top left corner to the bottom edge. Iron the folds well and unfold.


In the same way, fold the bottom left corner to the top edge. Expand.


You should end up with cross-shaped folds.

Step 2: Form the Flaps
Place the craft vertically. Fold the right corner down.


Divide the bottom side into 2 equal parts.


Leave the first part in place, and fold the second to the lower right corner.


Repeat on the left side.


At the top in the foreground you should have a regular triangle.


Repeat on the other side.

Step 3: Narrow the Middle
Fold the bottom side towards the center line.


Fold the paper right down the middle and turn it back toward the bottom edge.





Iron all the folds with an iron ruler so that they are even and neat.

Step 4: Form the Tower
Fold the bottom corner of one of the triangles up.


Lift the right one up as well.


Roll the craft into a cylinder with all the formed elements facing up.


Insert the “arrow” inside the square.


Fold the remaining two corners of the “arrow” into the bottom pockets so that you get it as follows (see photo below).

Step 5: Add a Muzzle
Take a small rectangle of a contrasting shade.


Roll it into a thin tube.


Insert the tube inside the tower. Ready!

You can also make this tank by watching the following video.

How to make a paper tank with a rotating turret

To create this origami you will need:

• 1 sheet of A4 paper,
• scissors,
• pencil,
• iron ruler,
• glue,
• a thin object for smoothing out small wrinkles.

Production time – 1 hour
Difficulty: medium

Step 1: Form the Undercarriage
Take a sheet of A4 paper.


Fold it in half, and then in quarters. Cut the sheet into 2 equal parts in the middle, that is, into 2 long strips (in the photo these strips are folded in half in width).


Take one of the strips and divide it into 2 parts in width, that is, in fact you should have 2 quarters of an A4 sheet in your hands. Set one quarter aside and work with the other.
Fold the quarter sheet in half.


Expand. Fold the bottom side towards the center line.


Fold the right side towards the center as well.


Roll the craft into a cylinder.


Press this cylinder down.


Bend all corners of the resulting figure by approximately 0.5 cm.


Fold all the corners inside the shape.

Use a metal ruler to smooth out the folds to make them more pronounced.


Fold the top flap towards the center of the figure.


Repeat on the other side.


Lift the right semicircular pocket at the bottom slightly. Make it longer.

Repeat this on all 4 sides.


Tuck the outer flaps on both sides to the highest point.


Turn the craft over. Fold the corners up approximately 0.5 cm.


Repeat on all 4 sides.


Fold the folded corners back down.


Put side elements perpendicular to the axis.


Using the previously folded folds, bend the craft upward along its perimeter.

The chassis is ready.

Step 2: Make undercarriage protection
Take the second quarter of an A4 sheet.


Fold the top edge about 0.6 cm, then fold it over again. You need to wrap the paper in one direction 2 times. When folding, it is convenient to use a metal ruler.

Repeat on the opposite side.


Place protection on the chassis. The width of the first should be approximately 0.1-0.2 cm longer than the second.


Fold the extreme corners along the folds on one side by approximately 0.5 cm.


Fold the corners inward along the curved lines.

Iron the folds with a ruler.


Tuck the outermost element up so that the “horns” stick out to the side.


Turn the craft over and insert the chassis into it. The latter should fit comfortably and tightly into the protection.


Draw a line with a pencil for the second edge of the protection.


Fold the paper inward at the marked point.


Fold the corners on the second side of the protection approximately 0.5 cm. Fold the corners inward along the marked folds.

Fold the rear flaps down, reducing their width by approximately 2 times. Make them longer.


Repeat on the other side.


Take protection and chassis. Put the first one on the second one and check how well they fit together. If necessary, correct minor defects by lengthening or shortening the protection accordingly.

Step 3: Make the fixing element
At this stage you need to make a fixing element for the chassis and protection on which you will put the tower. Also, with its help, the tower will be able to rotate in different sides.
Take the second half of the A4 sheet.


Fold the right edge towards the center line. Unbend.


Cut a quarter of this piece along the folded line.


Fold the paper in half lengthwise and mark creases along the edges.


Fold both edges towards the center along the marked folds.


Fold the corner down on the right.


On the opposite side, also bend the corner so that you get a triangle in the foreground.


Expand. You should end up with cross-shaped folds.


Fold the side flaps inward along the marked folds so that you have a triangle in the foreground.

Fold the left corner from the bottom side up.


Repeat on the other side. You should have the following figure.


Fold the bottom side towards the center line.


Fold the top side towards the center as well.


Place the craft on the chassis so that the square element is exactly in the center.


Next, you begin to bend the figure around the chassis. Make sure that it follows all the contours of the element placed inside.


Wrap the craft around the chassis completely. Trim off any excess length.

Insert one edge of the element into the other so that the square is located at the top at the center point.




————————————————-
Disconnect the fastening.

Place the guard on top of the chassis.

Wrap these parts again with an element with a square at the top. Some actions will be quite difficult to perform, but do not rush, act carefully and you will succeed.

The lower part of the tank is ready!

Step 4: Make a Tower
Cut out a square with a side of approximately 6-7 cm. Bend it along both diagonals.

Fold the paper in half.

Fold the corners down to create a perfect triangle.

Turn the figure over.

Fold the left corner towards the top.

Repeat on the other side.

Rotate the craft. Fold the side corners to the center line so that they are slightly shifted upward.

Insert the lower flap on the right side into the pocket located at the bottom of the side flap.

Insert the right flap into the pocket as well. It should look like this.

Turn the craft over.

Lift the inner pockets slightly upward.

Turn the pocket slightly outward.

Repeat on the other side.

Fold the top corner down. You have made the base for the tower.

Step 5: Make the Turret Guard and Muzzle
Cut out a piece of paper measuring 8 cm x 6 cm. For this work, you can use paper of the same shade that you previously used or use a contrasting color. We used a different shade and it really looks cute! If for each element we use different shades paper, it will look original and fresh!

Fold the piece in half in width. Next, you need to fold this paper in three along the points indicated by the arrows in the photo below.

Here the paper is already folded in three.

Open one spread. Fold the lower left corner from bottom to top. In the same way, symmetrically fold the right corner to the top. Pull the middle up and fold the craft in half. Gently pull the inner valve upwards.

Unfold the craft.

Decorate the third part on the other side of the craft in the same way.

Make sure that the internal valves are placed symmetrically.

Take your tower.

Insert one edge of the green guard into the inner pocket at the top of the tower.

From the bottom side, insert the protection into the inner pocket at the bottom of the tower. Cut off the excess length of the protection.

Fold the cut corner into the middle.

Place the defense on the tower and secure both elements. If necessary, use a little glue.

Cut a small rectangle to fit the circumference of the tower.

Roll it into a thin strip.

Bend one end of the strip perpendicularly and fold it in half to form a small triangle at the top.

Insert this end inside between the green guard and the tower.

Wrap the strip around the tower. Insert its other end on the other side of the protection. If necessary, secure the work with glue.

Roll a tube from a thin piece of paper and secure with glue. This will be the muzzle.

Place the turret on the chassis. To do this, insert the square located at the top of the chassis into the internal pockets at the bottom of the tower.

Place the barrel inside the tower and secure it with glue.

The work is ready!

We tried to tell you in as much detail as possible and show you the technique for making this tank. But if you still have questions and you don’t fully understand how to make this paper tank correctly, watch the following video.

If you use your imagination, you can create an original and interesting craft in the form of a paper tank. Moreover, if you do everything correctly, performing each stage of the work correctly, you can end up with a tank similar to the legendary T-34.

View already finished photo You can create an origami tank on the Internet, thereby having an idea of ​​what the end result should be. This is an interesting activity for children, allowing them to develop logic, motor skills, but also, of course, the opportunity to create something with their own hands.

Origami paper Tank. Peculiarities

In general, there is nothing complicated in such a craft, and with a little effort, even an inexperienced child can do it. Even if your baby cannot do this, he will definitely be interested in watching you do this work, turning an ordinary sheet of paper into a real work of art, especially since the instructions on how to make a tank will be described in detail.

Instructions

The first thing you need to do is fold the tank correctly. For these purposes, you will need to take an A4 sheet intended for the body of the product, the turret, but also, of course, a sheet for notes, a piece of paper for the barrel.

It should be noted that a step-by-step origami tank for beginners will allow you to easily turn such ideas and ideas into reality.

We will show you and describe step by step how to make a paper tank with your own hands. This tank model is the most popular. To make a paper tank with your own hands you just need a sheet of A4 paper and scissors.

Instructions for making a paper tank with your own hands.

First, let's prepare everything you need for origami, namely two sheets of paper, first A4, format 30x21 centimeters, second 5x3 cm and scissors. You can also take colored paper. In this case, your origami will immediately take on a unique look.

1. Place it in front of you large leaf paper as shown in the photo.

2. Fold in half, along the long side.

3. Bend and then straighten one corner first.

4. Then do the same with the second corner.

5. Do the same on the second side of our sheet (steps 3-4)

6. Next, we need to carefully bend both sides so that on the fold line there is a central point formed from two diagonal lines. For clarity, you can look at the photo.

7. Fold the corners inward along the fold lines. There are 8 corners in total.

8. We place the figure in front of us and bend the top corner down on each side.

9. Fold the top of the workpiece until it touches the center line.

10. Fold the same strip in half, bending the bottom edge up.

11. Then we bend the corners in the other direction so that they don’t interfere with us for now. We do the same as described in paragraphs 9, 10.

12. Bend the corners in different directions as they were originally made.

13. Place the figure on the table as in the picture. Roll up top corners in half.

14. Turn the tank model over to the other side.

15. Fold the layout into a ring. Our figure should be fixed, and the large angles should be on top.

16. We are making the turret of our tank. We tuck the large upper corners into the folds of the triangles located below.

17. As a result, we will get just such a paper model of a tank, only without a gun.

18. Now it’s the turn of the small piece of paper that we prepared at the very beginning of the master class. We make a tube out of it.

19. We install the cannon in the hole in front. We unbend the folds on both sides at the base, thereby creating caterpillars.

20. Congratulations, you have made a paper tank with your own hands.

How to make a paper tank video.

Don't be upset if you don't get the craft right the first time. In this case, try again to go through all the stages of assembling origami. Now you know how to make a paper tank.

Don’t forget, we take criticism well, if you don’t like the description of any step in describing origami, leave a review in the comments.

To get started, we invite you to watch video lessons that explain in detail all the intricacies of working with paper modules, and also have diagrams for assembling simple toys that can be made even with small children:

There are a lot of tank models. For example, you can make a T-34 tank like this.

This toy requires more high level mastery of origami. Therefore, we prepared a slightly simpler tank model for our master class, so that there would be no difficulties when working with a child. Today we will assemble this battle tank:

Before starting work, you need to prepare paper modules for work. In total we will need 1242 triangular modules. Of these, 551 modules of blue color and 691 - white. The colors of the tank are at your discretion, choose the paper that suits you best.

Triangular module assembly diagram:

Assembling the figure

When all the triangles are assembled, we move on to creating the tank. We start with the wheels. For the first wheel, we alternate the arrangement of white and blue modules 6 times and close the workpiece into a ring. The second and third row will consist of 12 white modules. The resulting workpiece must be turned out. In the 4th row we attach 10 more modules white.

And we do the 5th row similarly to the previous one. The first wheel is ready.

We repeat the sequence of actions for 5 more wheels.

Now we move on to the formation of the tank tracks. In total, 1 caterpillar consists of 32 rows of modules. The sequence of addition and order of colors is as follows: in each unpaired row there should be 5 blue modules, in each paired row there should be 4 white ones.

The caterpillar needs to be given an oval shape.

After both tracks are made, we must place 3 wheels inside. Then we connect the track blank to fix the wheels.

We fold the side part of the tank turret according to the track folding pattern. The number of rows is 19. To make a hole for the barrel, several modules must be removed from this blank. The barrel consists of a 9-fold repetition of the sequence: 2 blue modules, in the next row - 1 blue, 1 white, 1 blue. Now carefully glue the barrel into the tank turret.

After this, we move on to creating another wheel that will be mounted on top of the tower. To do this, for the first row we collect 20 modules alternating white and blue. There are also 20 white modules in the second and third rows. We turn the resulting workpiece inside out and install it on top of the tower.

Now we need to prepare the base for the tank. To do this you will need blue paper, a piece of foam plastic and a marker cap. From polystyrene foam you need to cut a block with dimensions: 7.5 × 3 cm. After that, cover it with paper and insert a felt-tip pen cap into the center.

Making the finishing touches. We connect 6 rows according to the scheme: 5 modules, 4 modules, 5 models, etc. You need to make two such blanks. These parts must be glued to the front and back of the previously prepared foam base. We install a tower with a barrel on top of the cap. To firmly fix the parts, modular origami allows the use of glue.

And in the meantime, our origami IS-7 tank is ready:

Follow our instructions very carefully to avoid mistakes in your work. Make your children happy original activity on the development of attention and hand motor skills.

To assemble the tank we will need:

• sheets of green paper;
• stationery knife (or scissors).

Instructions for the manufacture and assembly of the product

In total, 1688 green modules need to be made for the craft.

Let's start assembling the product from the tower. To do this, you need to connect the modules in triplets (15 in total), and then close them in a circle.

Total modules in a row - 30.

Carefully turn the resulting workpiece inside out. We lightly press on the corners that were on top and lower them down and inward. We will lift the corners that were at the bottom up.

Rows 3-8 - 30 modules each.

There are also 30 modules in the 9th row, but they need to be inserted with the short side out.

The tank turret is ready.

Assembly of caterpillars.

We begin assembling the caterpillar with triplets (25 in total), which we close in a circle. There are a total of 50 modules in a row.

Rows 1-5 - 50 modules.

In the sixth row, we reduce the number of modules by 4. We reduce them opposite each other in the places where the track bends. There are a total of 46 modules in row 6.

Row 7 - 46 modules, short side out.

The second caterpillar is made according to the same scheme.

You need to insert 3 wheels inside the caterpillar. The total number of wheels for two tracks is 6.

Making a wheel.

There are 10 modules in each row. In total you need to collect 7 rows.

The caterpillar is ready.

Connecting part for tracks.

The part is made quite simply according to the following scheme: we alternate 5 and 4 modules in a row.

In total you need to collect 34 rows.

The ends of the workpiece need to be slightly bent.

We insert the part between the two tracks.

Before attaching the tank turret to the tracks, you need to make a cannon. It is made in the same way as connecting piece, you just need to alternate 2 and 1 module in a row.

We attach the cannon to the tower.

And we attach the entire structure to the tracks.

Our tank is ready.

Making wheels

1st row: 6 times in turn blue, white...

2nd and 3rd row: 12 white each

Turn it inside out

Making the 4th row: 10 white

5th row: 10 white

We make 6 such wheels

Making caterpillars

Unpaired row - 5 blue, paired row - 4 white

We make 32 pairs

Give the caterpillar an oval shape

And put the wheels in

Connecting

We make two such blanks

By analogy with caterpillars we make the side part of the tower

A total of 19 paired rows

We make a hole for the muzzle (trunk) by removing several modules

Making a barrel: 2 blue, blue, white, blue.

and so on 9 times

Glue the barrel (substitute something to fix the angle of the barrel)

We make another “wheel” of 20 modules in a row

We turn out and install the top of our tower

We take blue paper, a felt-tip pen (you only need a cap) and polystyrene foam measuring 7.5 cm by 3 cm

Cover the foam with paper and make a recess for the cap

Insert the cap

We make six rows: 5, 4, 5, 4, 5, 4

We make 2 such blanks

Glue them

Install the body (for strength, it’s better to glue it)

Installing the tower

A tank for a gift for a boyfriend, father or brother made from triangular origami modules is ready!

Now you know how to make such a tank using modular origami technique. If you want, consider this video a master class on assembling this tank.

Also see how to make other interesting figures using the modular origami technique (3D origami) in our playlist

The article talks about how to make a model of a tank using the origami technique.

One of the most favorite games of little and big boys at all times was the game of war. You can organize a tank battle at home not only with the help of purchased toys, but also with models of tanks made using the origami technique. Both children and adults enthusiastically engage in this wonderful type of decorative and applied art, which helps develop spatial imagination, imagination, memory, patience, accuracy, and finger dexterity. And it’s just nice to play with handmade crafts.

The benefits of origami can hardly be overestimated. Origami classes are used in the practice of speech therapists, they are used in the correction of disorders of the musculoskeletal system and mental disorders in children. The beauty of skillfully crafted paper models– animals, birds, geometric shapes, ships, airplanes, allows you to decorate shop windows and house walls, decorate city holidays, and use in commercials.

The art of origami originated in Japan. Paper layouts originally had symbolic meaning, served as elements of religious ceremonies, later they were given to each other by representatives of the social elite, and used at weddings. Once in Europe and America in the twentieth century, origami gained many fans. The creation by a Japanese master of a system of symbols for schematic notation various models, allowed this art to spread everywhere.

There are several varieties of origami: simple for beginners and the most complex for masters.

Classic origami does not take much time and is accessible to beginners, but modular origami from a paper tank will require much more effort and some skill.

History of tanks

Boys love to play war games: they play them on the computer and with models. What is war without weapons?

Tanks are one of the state-of-the-art instruments carrying out ground battles - real enemy fighters. This powerful technique gives superiority in the process of military conflicts. Most major battles were won through its use.

The history of tank technology dates back to the beginning of the twentieth century with the creation of the first copies the latest weapons, which opponents appreciated quite quickly. There is a version that the first tank, invented by Leonardo da Vinci, was a wooden box on wheels with holes for firing. During this time, the design features of tanks and their capabilities have changed. The prototype of the military machine appeared in Great Britain on the eve of the First World War. High cross-country ability of armored vehicles was ensured by tracks. The creation of the T-34 tank, which the famous German Tigers could not withstand, influenced the result of the Second World War and the further improvement of technical characteristics.

An origami paper tank created according to the pattern will be similar to this famous combat vehicle.

To fulfill the boys’ desire to command an entire tank army, they first need to work with their hands and heads, learn a lot, spend time and energy. After all, several dozen tank models will have to be made. But a spectacle tank battles on the floor of the house will look impressive and unforgettable.

How to make a tank from origami paper?

There is a guide and quite a large number of Schemes for creating origami tanks from paper. All of them are quite simple and accessible for beginners, for example, models such as the Is-7 or T-80. A variety of schemes will allow you to diversify the tank models and thereby maintain the child’s interest in the game. Even if the child is small and cannot handle the tank model on his own, he will be fascinated by watching the wonderful transformation of the sheet in the hands of his parent. And then you can also color the resulting toy, if you didn’t immediately take khaki or just green paper.

Principles of tank assembly

To make a paper tank with your own hands, you need to take a sheet from which the hull and turret will be assembled. Another smaller sheet will be needed for the trunk. There is no need to glue anything, so there is no need to wash off the glue from the carpet and floor. The most important thing is that the child’s safety in this game is guaranteed.

In order to make an origami tank out of paper, there is step-by-step instruction. The tank model is three-dimensional and includes two modules connected using the origami technique. The body is built in stages together with the turret; the barrel is attached separately. Special attention attention should be paid to folding the tracks.

It takes ingenuity and a sense of proportionality to select the necessary and sufficient barrel length. Little heroes have different opinions on this matter. In some cases, you have to use tools to shorten the barrel.

Tank installation

• At the initial stage of assembly, you should fold the sheet in half.
• Then you need to mark the fold lines indicated in the diagram and fold the workpiece along the intended bends.
• Folding from the symmetrical side is performed in a similar step-by-step manner.
• Next, you need to bend the sides towards the center.
• The next stage is the manufacture of the front part, for which you need to bend the corners of the front section into the recess of the back section.
• The edges of the sheet just bent towards the middle must be bent again, only in the opposite direction - towards the outer sides.
• After this, you should smooth out the craft and bend the corners of one resulting triangle to the top.
• Then the model is turned over and divided into three fragments, folding it in places where it is divided. On at this stage you can already see the tower looming.
• The remaining uncurled corners must be folded in the opposite direction - inward.
• In order to get a tower, the corners that were obtained at the previous stage of work must be connected to the opposite corners, threading them into pockets.

The manufacture of the turret has been completed, and the tank itself is almost ready.

The most the hard part work completed. All that remains is to make the tank body three-dimensional, make a barrel and attach it to the model.

The final stage of work

• To obtain a neat cylindrical barrel, you can use some auxiliary tool: pencil, knitting needle or toothpick. Paper is rolled around this item, then unrolled and rolled again. reverse end. This will create a neat barrel that will not unwind.
• All that remains is to straighten the tracks, put another fold on each of the connected triangular figures and insert the barrel into the tank’s cabin.

A finished modular tank, if it was not made from colored paper, can be painted under camouflage, giving it a natural war paint. And if you improve the real picture of the battle and place a tank army on an area with trees, also made using the origami technique, the child will be delighted and will gradually become familiar with the ancient art.