Rehau windows are 5 chamber. REHAU is the patriarch of plastic windows. Comparison of technical characteristics
![Rehau windows are 5 chamber. REHAU is the patriarch of plastic windows. Comparison of technical characteristics](/uploads/b4fa322f89ad992287895dcd312d0f18.jpg)
Read also
The REHAU concern produces profile systems for windows of various price categories:
- Blitz, Grazio, Estet - budget;
- Intelio, Delight - luxury class;
- Brillant, Geneo - exclusive.
The budget profiles “Blitz”, “Estet”, “Gratio” of the German brand are in no way inferior in quality to the exclusive “Geneo” and “Brilliant”. Products from different series differ primarily in operational properties and the range of tasks to be solved.
Specifications
- Grazio- budget series with elegant design and high thermal insulation. Thanks to the minimum plastic width of 104 mm, the profile allows maximum light to pass through. Suitable for glazing in areas with harsh climates.
- Estet— 3-chamber profile with unique sashes, which were previously mounted only on premium windows. A system with increased burglary protection and heat and sound insulation.
- Blitz — budget profile for reliable, no-frills glazing. The delivery set includes a profile frame with a glossy surface, a single-chamber double-glazed window, basic fittings and a rubber seal.
- Intelio- legendary “quiet” 6-chamber windows from REHAU, blocking cold and sound from the street and letting in maximum light. Provides for installation of double-glazed windows up to 52 mm thick. For tightness, they are equipped with a 2-circuit seal and convection limiters.
- Delight— energy-saving profile with 5 chambers, reinforced with reinforcement. Decorated with elegant beading.
- Brillant— warm five-chamber profile with increased burglary safety. Lightweight, durable, suitable for creation window systems any sizes.
- Geneo- the most reliable mass-reinforced profile made using the innovative material RAU-FIPRO ®. 40% lighter than analogues.
Profile | Thickness (mm) / Number of chambers | Thermal conductivity (m2*°C/W) | Options | Sound insulation class |
Blitz | 60/3 | 0,7 | Drainage | 4 |
Grazio | 70/5 | 0,85 | Double sealing rubber with 6/8 mm overlap | 4 |
Estet | 60/3 | 0,64 | Installation of reinforced locking fittings is possible | 4 |
Intelio | 86/6 | 0,95 | Convection limiter, perfect Smooth surface | 4 |
Delight | 70/5 | 0,8 | Drainage, 2-circuit seal | 4 |
Brillant | 70/5 | 0,79 | Drainage, double-circuit seal, innovative design, burglar-proof | 4 |
Geneo | 86/6 | 1,05 | Condensate drainage, mirror surface, double sealing circuit | 4 |
Design
A characteristic feature of all REHAU systems is ideal smooth surface. It can be matte or glossy. Somewhat angular - in the Blitz series, with soft lines- from Brillant, mirror - from Geneo. The Delight profile is recognizable by its rounded frame corners. The content of any model is not limited in design - it can be stained glass, tinted, colored, laminated to resemble wood or metal. The plastic is painted white or any other tone, including wood-like.
Profile selection
"Blitz" is an inexpensive solution for glazing of office, retail, industrial and residential buildings. Designed for use in mild climates. This is a laconic, high-quality profile that fits harmoniously into the exterior of multi-storey buildings.
“Brilliant” is an exclusive system that retains heat as much as possible and reliably protects the opening from burglary. Maintains functionality in any climate conditions.
"Delight" - profile system luxury class for aesthetes. Its frame can be designed individually to suit a specific interior.
"Geneo" is a solution for discerning homeowners. The plastic in this series is unprecedentedly light thanks to the innovative material and can be installed on load-bearing bases.
HideEnergy-saving REHAU windows will save not only heat, but also your money. This is not just an advertisement, this is the slogan of a company that has been on the market for 60 years. That is, the first REHAU windows manufactured in 1954 serve their owners to this day. This German company. She has been working in Russia for 12 years.
Description of the main models
REHAU windows are represented on the domestic market by 6 main models that sell different companies– both ours and foreign ones. There are plenty to choose from!
BLITZ-DESIGN
A standard model that is suitable for practical owners. This is a sales leader for city apartment owners. No show off, emphasis on efficiency, high-quality thermal and sound insulation.
The profile width is 60 mm, the profile height - including the sash - is 116 mm. The glass unit is three-chamber, that is, made of 4 glasses. The width of the glass unit is 32 mm. Heat transfer resistance coefficient - 0.64 m2 s/W. There are also profiles that protect against the cold, but for the city in middle lane This suits Russia quite well. Kind " golden mean", the best balance between price and quality.
The average profile price is RUB 8,300.
SIB-DESIGN
The SIB-DESIGN model will protect from the cold better than the previous one. The profile width is 70 mm, the profile height - including the sash - is 120 mm. There are already 4 chambers in a 40 mm wide double-glazed window. It is clear that the heat transfer resistance coefficient is higher - 0.72 m2 s/W. Such a window can also be used in country house put. Therefore, SIB-DESIGN is the leader in sales to owners country houses in Russia.
The price will be about 10,500 rubles.
DELIGHT-DESIGN
The model is addressed to those who want more illumination and heat preservation in the apartment. The narrow frame lets in more light and has built-in anti-theft protection. The profile width is 70 mm, the profile height - including the sash - is 109 mm.
A 40 mm wide glass unit includes as many as 5 cameras. Heat transfer resistance coefficient - 0.8 m2 s/W. Its thermal insulation is higher than previous REHAU models. This profile is also preferred for country houses. The average price is 10,900 rubles.
BRILLANT-DESIGN
This is luxury class - both in aesthetics and in price. The profile design is unusual - rounded door, high sound insulation, built-in protection against theft. The profile design protects well from rain and snow. Profile width - 70 mm, profile height - including sash - 120 mm. The glass unit is 40 mm wide and also has 5 chambers.
Heat transfer resistance coefficient - 0.91 m2 s/W. The average price is 12,700 rubles.
GENEO
This is an even cooler model - super luxury. Everything that can be used for comfort is used. The profile characteristics are impressive. Width 86 mm, height including sash - 120 mm, 6-chamber double-glazed window.
The profile is made of special fiber-fiber material RAU FIPRO. It was invented in the REHAU laboratory and is even used for airplanes. Therefore, the heat transfer resistance coefficient has increased to 1.05 m2C/W, and the level of burglary resistance has been increased to class 2. The price will be about 16,000 rubles.
INTELIO
The most expensive model from the REHAU profile. The glass unit is 6-chamber, 86 mm wide, the heat transfer resistance coefficient is slightly less - 0.95 m2C/W. It is claimed that in terms of their thermal characteristics, windows of this profile are similar to a wall whose brick thickness is approximately 110 cm.
This profile uses special glass, which reduces the noise level indoors by half. Burglary safety has been increased to class 3. The average price is 17,000 rubles.
Four- and five-chamber double-glazed windows show high energy efficiency, are distinguished by their profile strength and longer service life compared to standard two-chamber solutions. Most often they are installed in industrial and office buildings with window openings large area. The thickness of the glass unit and the width of the profile allow it to cope with the load without deformation. In residential buildings, windows of this type are installed in regions with low temperature minimums - from -30 degrees to winter period.
Some of the lowest prices in Moscow
Production quality control at all stages
Minimum production time
Professional installers
Warranty period - 5 years
Description of multi-chamber double-glazed windows
The design is based on a reinforced profile made of non-toxic polyvinyl chloride with metal frame. Improved noise and heat insulation performance is achieved by using glass sheets of different thicknesses, which dampens sound waves, and filling the chambers with inert gases.
REHAU profiles
The sizes of windows with reinforced double-glazed windows can be as large as desired. The profile easily supports its own weight with a window area of several meters. Developers often install multi-chamber double-glazed windows in penthouses and office buildings that provide transparent glass walls.
Features and applications
Four- and five-chamber double-glazed windows allow you to maintain a comfortable internal microclimate during sudden changes and extreme minimum outside temperature. In addition, energy efficiency makes it possible to install windows of this type in modern eco-friendly buildings that use for heating alternative sources energy.
Recently, the company "Windows Rehau" began to practice installation of reinforced solutions in homes and commercial buildings in southern regions, due to the tightness of the structure and its inherent high light transmittance, under certain conditions it is possible to completely abandon heating systems.
Possible modifications
Typically, double-glazed windows that include more than two chambers with inert gas, are not equipped with repellent systems. But the profile’s capabilities allow you to make not only blind windows, but also opening modules.
Concerning color solutions, the dye is added to polyvinyl chloride at the manufacturing stage window profile, so the paint does not fade over time, and you can choose a solution that matches the architectural design of the developer.
To select double-glazed windows for home, industrial or office building contact the company manager "
Taking a stand in a highly competitive market PVC window profiles, Rehau company has updated its product line. Plastic Rehau windows traditionally famous for their profile quality. One of the most interesting new products from this popular European brand was no exception. Rehau Grazio windows have already captivated consumers with their beauty, elegance and ergonomics. The new profile system is structurally different from other profiles of this company and deserves attention.
Example of the cost of Rehau Grazio in a Moscow company
![]() |
![]() |
![]() |
![]() |
from 8 500 rub | from 13 500 rub | from 20 500 rub | from 17 200 rub |
Find out the cost of Rehau Rehau Grazio windows at the PVC Window Factory company
(Only for residents of Moscow and the Moscow region), send a request to calculate the cost:
5 CHAMBER
METAL-PLASTIC WINDOWS
Plastic windows can have different configurations. The main criteria are the number of cameras and the width of the profile itself.
Chambers are called closed cavities inside a profile, separated from each other by walls. Cameras are counted horizontally, regardless of their size. How more quantity chambers, the higher the heat and noise insulation rates this profile.
Standard width five-chamber profile - 70 (mm).
Five-chamber systems with double-glazed window meet the highest requirements for heat and sound insulation.
windows from the profile five-chamber system "Rehau Brillant-design" are ideal for buildings with low level heating costs and energy-saving renovations.
Metal-plastic five-chamber windows are premium-class systems that can satisfy the highest technical and aesthetic requirements of luxury construction.
The only drawback of such systems is that they are more high price compared to three-chamber and four-chamber systems.
"REHAU"
""VEKA""
""KBE""
""MONTBLANC""
"PLAFEN"
Comparative characteristics five-chamber windows
Profile | KBE EXPERT | MONTBLANC CITY 120 | MONTBLANC NORD 70 | MONTBLANC TERMO-NEW | PLAFEN S-LINE | REHAU BRILLANT DESIGN | REHAU EURO-70 DESIGN | VEKA SOFTLINE |
---|---|---|---|---|---|---|---|---|
Number of cameras in the window sash (PC) | 5 | 5 | 5 | 5 | 5 | 5 | 5 | 5 |
Number of cameras in the window frame (PC) | 5 | 5 | 5 | 5 | 5 | 5 | 5 | 5 |
Sash installation width (mm) | 70 | 60 | 70 | 60 | 86 | 78 | 78 | 70 |
Sash installation height (mm) | 80 | 78 | 79 | 58 | 86 | 80 | 94 | 80 |
Installation frame width (mm) | 70 | 120 | 70 | 60 | 75 | 70 | 70 | 70 |
Frame mounting height (mm) | 69 | 78 | 68 | 67 | 73 | 68 | 68 | 67 |
technical data table for 5-chamber PVC profiles kbe profile expert montblanc city 120 montblanc nord 70 montblanc termo-new plafen s-line rehau brillant design rehau euro-70 design veka softline |
. The data is generalized and taken from the analysis of certificates, window test reports and advertising materials from manufacturers (copyright website).