DIY fencing for flower beds. Beautiful decorative fences for flower beds from scrap materials Decorative fences with your own

Reading time ≈ 3 minutes

Today, many city people take a plot outside the city and build houses. It can be either a residential building or summer cottage. But any home remains unfinished not only without landscaping the site, but also without a fence. And if you can invite specialists to build a house, then you can make the fence yourself. But to do this, you need to decide what it should be.

Material selection

One option is to make a decorative fence with your own hands, for the construction of which you can use different materials. It will serve not only as protection against welcome guests, but also as decoration. Today, you won’t surprise anyone with an ordinary fence, but with the help of a decorative fence, as in the photo, you can not only surprise neighbors and passers-by, but also create a more comfortable corner around your house.

Many people think about how to make a decorative fence, and what material should be chosen for this? There are many options, you just need to use your imagination. To do this, you can take the most various materials: boards and bricks, stones or rods. You can even use glass and plastic bottles. Moreover, you can create a decorative fence for your dacha both in the form of an external fence and to delimit internal areas.

Probably the most original version is a decorative fence made of branches or vines. Such fences were built for a long time, why not return to using this material again? In order to make such a decorative fence with your own hands, you need to prepare the following materials:

• stakes (preferably oak);
• battens or beams;
• thin twigs (annual ones from willow or vine are best);
• axe, hammer and antiseptic.

Construction of a decorative fence

Below are photos of a decorative fence made by yourself, after reading which you can have an idea of ​​what kind of fence such a fence should have. In case in the process self-construction If there are any difficulties with such weaving, you can also watch the video, which is available at the bottom of the article.

Necessary sharp knife cut the rods, which should be steamed well in water. This is done to make them more flexible. They should remain in water for a day, and only after that they can be used for weaving. All posts are treated with an antiseptic so that they can stand in the ground as long as possible. You can use both vertical and horizontal weaving methods. For example, a fence from the street can be made using vertical weaving, and then it will resemble an ordinary fence. A horizontally You can fence off any area or passage to the house inside the yard. But for vertical weaving you will need armor between the stakes.

When weaving vertically, the posts are fixed at a distance of 2 meters from each other, and 3 bars are attached between them. And after that, a vine is woven alternately between these beams: first in front of the top beam, then behind the middle beam, and again in front of the beam. The next vine is in reverse order. And so on until the end of the fence. As a result, we will get a decorative fence, as in the photo.

The catalog of our online store contains more than 170 accessories for landscape design. The cost of curbs and fences depends on the materials and design.

Benefits of accessories

• . Curbs. Made from high quality plastic or polypropylene. Fixed to the ground plastic nails. Standard length packaged product - 3 m. Installed on the border of a bed, flower bed or lawn. Resistant to weather conditions. Fan structures are used to create multi-tiered flower beds.
• . Border tapes. They help create shaped flower beds. Used in the design of lawn edges and separation of bulk materials.
• . Decorative fences. They are constructors that are connected using special latches, which allows you to make a fence of any shape. Fixed to the ground with mounting feet. Length - 3 m. Some options are suitable for creating sandboxes.
• . Decorative gravel. Used in decoration alpine slides, flower beds, creating paths and compositions. For these purposes, you can choose multi-colored pebbles, white or gray. marble chips, decorative rock different colors.

Also in the catalog select weather vanes, bridges, garden figures, artificial grass and other products for decorating a personal plot.

Payment and delivery methods:

1. Buy goods online with delivery

• . You can pay for your order in cash or by bank transfer.
• . You will agree on the date and time of delivery with the operator by phone when confirming the order.
• . The conditions for the free provision of the service depend on the city, amount and weight of the product.
• . Unloading of goods, lifting and carrying refers to additional services and may be paid separately, check with the store operator.

Detailed information about intervals and zones by city, conditions for unloading and picking up orders is available on, where you can independently calculate the cost of your delivery in advance, indicating the postal address and parameters for unloading.

2. Order and pick up where you want

• . When filling out the order form, indicate the date and time convenient for you to visit the hypermarket.
• . You can pay for your purchase in cash or by bank transfer at the store's cash desks.

Purchased goods can be picked up independently at any of the OBI stores in Moscow, St. Petersburg, Ryazan, Volgograd, Nizhny Novgorod, Saratov, Kazan, Yekaterinburg, Omsk, Krasnodar, Surgut, Bryansk, Tula and Volzhsky.

When choosing a fence, the first step is to decide what function it will have to perform.

If you need to protect a flowerbed from children or animals, you should give preference to a higher fence - about 40-50 cm. In this case, it doesn’t hurt to take care of its stability.

To protect against the spread of roots from the flower bed throughout the area, it makes sense to dig a special plastic border along the contour of the flower bed.

If the fence is intended to perform an exclusively decorative function, you can make it light and low.

If the flower bed is elevated above the main level of the site, the fence must be very strong to hold the soil in the desired position.

Most often, when arranging fencing, 5 main materials are used:

Tires;

Available materials;

Plastic.

Do-it-yourself fencing for a flower bed made of wood

The most environmentally friendly and available material for the manufacture of fences - wood. Compared to other materials, it has 2 advantages:

When decomposed, it enriches the earth with organic matter;

Well tolerated winter frosts(does not crack or deform).

Besides, wooden structures create a special fairy-tale atmosphere on the site. The main thing is not to forget to treat the wood with an antiseptic and water-repellent solution.

To create wooden fences, boards, logs, saw cuts, vines, and driftwood are used.

Stone fencing for flower beds

Stone fencing looks very impressive and solid. These can be natural boulders or cobblestones, fake diamond, brick, paving slabs.

The main advantage of stone structures is durability.

For a tall fence or raised flower bed, it is convenient to lay stones on a concrete foundation.

Bricks can be placed vertically, horizontally or obliquely. To give strength, it is worth connecting them with a solution. Masonry can be carried out in 1 or several layers.

DIY tire flower bed

Original flower beds are made from old ones car tires. They can be dug into the ground or installed on top and filled with soil.

Sometimes they are given a certain form and painted in the desired color.

Handy materials for flower beds

Often, improvised materials are used for fencing: plastic and glass bottles, tiles, slate.

Plastic fences for beds and flower beds

If you don’t want to come up with something unusual, you can always use ready-made plastic fences. They are available for sale in a wide range.

You made several flower beds on your site, planted them in various flowers. The territory acquired charming view, but it feels like something is missing... Some touch to make the overall picture look complete. The solution is simple - install decorative fences.

Advantages of using decorative fencing in the garden

You will not only decorate the flower garden, but also solve several additional tasks:

• fences allow you to achieve a uniform style throughout the entire site;
• the territory looks more well-groomed and tidy;
• the fence holds the grass and plants, preventing them from “spreading” beyond the flowerbed;
• using a decorative fence, you can divide the territory of the site into functional zones;
• your flowers will be reliably protected from cats, dogs and other animals;
• the fence will tell guests where not to step, so as not to inadvertently destroy the first inconspicuous shoots.

Using a decorative fence for flower beds, you can divide the site into functional zones

Specialized stores sell a variety of plastic fencing of the most different forms and colors, you can also buy forged fences or wooden fence chicks, but the cost of such decorative elements Not everyone can afford it. But even novice gardeners can make a fence for flower beds with their own hands from stones, plastic and glass bottles, willow twigs and small logs.

Video about what kinds of fences there are for flower beds

What materials can be used to build a decorative fence. Their pros and cons

Basically, at dachas they use leftover building materials or purchase inexpensive ones.

Wooden fences

Wooden structures bring people closer to nature, blend with the landscape, and are easy to repair. The material is easy to process, so fences can be created with my own hands. When choosing a tree, you need to consider what you will need special drugs for insect control.

Wooden fences are susceptible to rotting, so the material must be treated promptly.

Natural stone fencing

The structure, made of cobblestones, looks very natural. To create such naturalness, you need to try, selecting parts according to size and connecting them with mortar. The disadvantage of this structure -heavy material gradually settles, so it is necessary to restore the bed.

Metal fences

Cuttings of rods and pipes have always been in demand in summer cottages:

• short ones were used as fastenings for sides;
• medium cuttings connected with wire lift large branches well;
• long ones will serve perfectly as trellis posts when growing grapes.

From thin sheets They create borders for beds, but such a product in the soil is susceptible to corrosion and quickly rusts. If you use iron fences with a galvanized and polymer surface, the curbs will last much longer, the disadvantage is high price.

Modern designs of decorative borders and beds

Plastic is one of the new materials for country fences; it does not require special care, easy to use, long term services. When purchasing such material, it is necessary to require certificates for environmental safety. Flexible border tape is a plastic sheet with a wavy surface. The advantages are obvious:

• availability;
• Convenient installation with minimal tools;
• simply give the required shape;
• does not deteriorate in the soil, does not rot.

The disadvantage is low reliability. The material quickly lends itself to mechanical stress.

Video: border tape

How to make a wooden fence for flower beds with your own hands

Most a good option A fence made of twigs, pegs, planks or logs is considered to be a fence. The tree gradually decomposes in the ground, filling the soil nutrients. In winter, wood freezes less than stone or plastic, which means root system plants will be protected from freezing.

Willow fence

The most successful option is a fence made of twigs, pegs, planks or logs.

Wicker fences for flower beds look charming. Although making wattle fence requires time and some effort, the result will delight you for many years!

Willow twigs can be obtained from the shores of any natural body of water. It is recommended to prepare them in early spring, then the bark will be easy to remove, and as a result you will get a strong fence for a pleasant light color. Having collected more twigs, prepare them for work: peel them from the bark and cut them to the same length. Along the perimeter flower bed Place pegs with a diameter of 3 cm at equal distances. The closer the pegs are to each other, the stronger the wattle fence will be. The pegs are braided according to the principle of basket weaving - the rods are passed either in front of the stakes or behind them. After completing 3-4 rows, compact the entire structure by tapping it with a hammer so that after drying your wattle fence does not become loose. The ends of the twigs can be further secured by nailing them to the pegs.

Decorating a flower bed with logs

eternal beautiful fence for a flower bed it is obtained from small logs of wood

A long-lasting, beautiful fence for a flower bed is made from small logs of wood. Logs of approximately the same diameter and height are prepared, taking into account the fact that about 20 cm will go underground. A strip of turf is removed from around the flowerbed and a shallow ditch is dug. Logs are installed in it, tightly to each other, then bottom part The logs are covered with earth and compacted thoroughly. It is recommended to first remove the bark from the logs and treat them with a special solution; then such a fence can last for about 50 years. Instead of logs, you can also install pegs.

Miniature wooden fence

Decorative fences for flower beds made from boards look charming. It will take more time to make such a fence, but the result is worth it! Pre-make from boards or wooden planks blanks of the same size with a triangular or shaped top, fasten them together with transverse boards to create several small sections. Dig the posts into the ground at equal distances and secure the prepared sections to them using self-tapping screws or nails. The finished fence is covered oil paint for protection from rain and snow.

DIY decorative metal fence

Set for work: tape measure, rope, level, cement mortar, crushed stone, supports, welding apparatus, shovel and logs.

Suitable for supports iron pipes, it is possible to use square or round section not less than 70 mm in diameter. To mount the logs, we purchase a 25 x 40 mm flat profile.

We fasten the logs horizontally, due to them a strong connection of the profiled sheets will be created.

1. We explore the terrain of the territory. We select suitable places for placing gates.
2. We mark the area. So we install rods around the perimeter of the fence and connect them with rope. We also mark areas for racks. Maximum size between them is 3 meters.
3. We dig holes for the racks approximately 20 cm in size and up to 1-1.3 m deep.
4. We install the supports, checking them strictly according to the level.
5. We fill the bottom of the holes 20 cm with gravel or crushed stone and fill it with cement mortar. It takes 3 days to dry. Special caps are put on the supports; they will protect the structure from rain.
6. Install cross beams. For better fencing strength we use welding machine. We select the number of crossbars according to the required height of the fence. For example, for a fence 1.8 m high, 2 crossbars are enough. When the fence is built higher, the number of joists is needed more.

Brick fence

We will place the bricks on cement mortar; it is not difficult to prepare it yourself: mix a portion of cement with three portions of sand, add water until a mass is created.

Before work, you need to decide on the size of the fence. When the fence is intended for decoration, it is convenient to build it in half a brick. If the fence is intended for protection, it should be made of one and a half to two bricks. The length of the product varies up to 3.5 m.

To ensure the reliability of the fence, the masonry is done in columns with piers, and pillars are also made in the gates. Rods and rope are used to mark the foundation. We place pegs along the walls and corners of the trench at intervals of up to one meter, using a rope between the rods. We mark the areas of pillars and gates. Trim the corners using a square. All the shortcomings need to be corrected.

Making the foundation

1. We dig a trench 6-7 cm larger than the intended masonry, a depth of 0.8-1 m. We trim the walls and bottom of the pit. We place up to 10 cm of sand into the trench, compacting it well.
2. We put up the formwork. We lay boards so that the surface is level after concreting. To reinforce the foundation, we connect the rods into a mesh with wire. We place the net on compacted sand.
3. We concrete the trench. We make the composition from a portion of cement, two or three portions of water with sand, four to five portions of crushed stone. We thoroughly level the poured surface and remove the air by piercing it with reinforcement. We leave the pouring for three to four weeks for strength.

Fence laying

First, lower the bricks into water for a minute. Due to this, the pores are moisturized and will not absorb moisture from the solution. For strength and reliability, we will build a one-piece fence along its length.

1. We make pillars from four bricks, creating space inside. The void is filled with reinforcement and concreted. First, we lay columns three bricks high. We lay the walls between the columns at the same height.
2. We connect the columns with the spans and lay out the reinforcement.
3. We increase the masonry to the height of three bricks in the same way. We build it this way to the required height: put 3 rows, reinforce, again 3 rows and then reinforcement.

Plastering the fence

1. We moisturize the walls. Apply a layer of plaster up to one and a half cm.
2. Let the solution dry for an hour. Level the plaster with a lath and let it dry for 2 days. In between, we moisten the plaster to prevent cracks from appearing.
3. After 2 days, we again moisten the plaster with water for troweling.

From natural stone to plastic bottles

When installing a curb large stones pressed into the prepared concrete pad around the perimeter of the flower bed

Quite often, fencing for flower beds is used in landscape design. from natural stone round or uneven shape. Such borders look noble, with their help you can significantly transform the area near your cottage or country house. Whatever stones you use - small or large, they must be fastened with cement so that the fence does not fall apart under the pressure of the soil. When installing a border, large stones are pressed into a prepared concrete pad around the perimeter of the flower bed, and small stones are held together using concrete mortar, to which is added special glue for greater durability. For tall flower beds you can lay out a border from flat stones, fastening them with cement.

You can simplify the process by changing a natural stone on a brick. Decorative fences for flower beds made of red brick are ideal for decorating a garden in a country style. It is possible to lay a border made of bricks without concrete mortar, since the smooth sides of the bricks form a strong adhesion that can withstand the pressure of soil from the flowerbed and prevent the structure from falling apart under its own weight.

Video about fencing for flower beds

The most economical solution– making a fence for a flowerbed with your own hands made of glass or plastic bottles . Although such a fence is easy to deform, you can always replace a damaged bottle with a new one. For one small flower bed you will need from 15 to 25 bottles of the same shape. Fill the bottles with any bulk material: sand, soil, small stones. Cover them with lids and dig them, neck down, halfway into the soil around the perimeter of the flowerbed. If desired, you can paint the resulting fence.

How to care for fences - minimum requirements for summer residents

A combined fence made of wood and brick has little moisture resistance, so you need to take care of the paint and varnish coating. It doesn't take much effort. It is enough to occasionally check the product for suitability of varnish and paint, as well as timely updating.

In the fencing, it is necessary to pay attention to the correct calculation of the load and the selection of reliable frame posts. This calculation also takes into account the presence of large dogs on the site, leaning on fences or many anthills that destroy wooden panels.

The fence made from car tires needs to be repaired every one or two years - remove cracked paint and renew it to increase the life of the fence.

When the fence is made of picket fence, the wood needs special care:

• treatment with antiseptic substances that protect wooden crafts from pests;
• painting the fence.

To increase service life metal fence it is necessary to update the varnish and paint coating, so before applying a new paint it must first be sanded and degreased.

A surface that has been cleared of peeling coating will take on the new paint much better. For hedges everything is clear, pruning, proper watering

and crown formation will help create a green fence on the site. Now you know how to fence a flower bed, all that remains is to decide on general style designing your site and stocking up suitable material

. Having once spent time creating decorative fences, you will be able to admire your landscaped area for several years!

DIY fencing for flower beds: impressive, stylish, attractive A fence for flower beds, made with your own hands from scrap materials or installed using ready-made elements, is in the overall landscape design of the site. It not only performs decorative functions, giving the flower beds a finished, well-groomed look, but also creates a harmonious, unified landscape composition. In addition, it helps in zoning the site, dividing it into thematic zones, as well as performing protective function, protecting delicate plants from “excessive interest” of children and animals.

The height of the decorative fence is selected based on the height of the flowers grown in the flowerbed or lawn

A flower bed neatly fenced with a metal decorative fence made of stacked sections

Irises surrounded by a row of large sea shells

Types of fencing for flower beds

Depending on the purpose for which it will be used garden fence, select a fence of a certain type:

to simply separate the lawn and flower garden, marking the border of the flower bed, a low, modest fence 5-7 cm high will do

If the purpose of installing a fence is only decorative, and you need to divide sections of the flowerbed, then a small (5-7 cm in height) decorative fence is best suited

if the flowerbed fence also serves as a border for the garden path, you will need a more stable and powerful fence with a height of at least 10 cm

As garden decoration Multi-colored bowling balls will look great

A fence made of brick and stone is usually used for flower beds raised above the ground. In this case, in order to hold the soil and keep the shape of the flowerbed unchanged and stable, the fence must be stable and durable

Decorative monolithic blocks for sidewalks and stone fences

To prevent the flowerbed from growing and blocking the long roots of some plant species, you will need a fence recessed to a sufficient depth in the ground. For these purposes they usually use plastic tape or stone (brick) masonry, but wood in such conditions will quickly collapse

A special garden metal fence that prevents the growth of plant roots should be driven into the ground to the depth specified in the instructions, and you will get perfectly smooth borders of the lawn or flower bed

To protect plantings in flower beds from children and pets, you will need a fairly high, at least 40 cm, fence. But in order to maintain the visual appeal of the flower bed, “transparent” fences are used - picket fences made of wood, metal or plastic.

For fencing a front garden, the ideal picket height would be about half a meter.

A single one looks stylish color theme in the design and fencing of flower beds, and garden fence

The choice of fencing type is directly influenced by the plants in the flowerbed. A fence of medium (40-50 cm) height will look harmonious around a front garden or rose garden. A low fence will simply be visually lost against the background of tall slender roses, spreading peonies or lush dahlias. But a mixborder or color border practically does not need a fencing as such; here it is quite possible to limit yourself to a line laid out from paving slabs, mosaics or flat stones.

The choice of the type and height of the fence depends on the type of plant - it must provide sufficient visibility for decorative flowers and have sufficient height to protect them

Wooden fencing

Wood - very cozy and warm natural material, which will look quite natural on the site. It does not get hot in the sun and does not reflect Sun rays, so it will not cause burns to delicate vegetation. Working with such material is simple, interesting and enjoyable; it does not require any special skills. A significant drawback is the fragility of wood, which is partially compensated by treatment with special impregnations and periodic tinting. In this case, it would be appropriate to use any type of wood - from cut branches to lining, picket fence and even slab.

An unpainted fence of medium height will go well with the decor of an antique garden; it can both enclose flower beds and separate areas of the lawn

Wooden fencing can be very diverse:

palisade or border made of pegs (blocks) buried in the ground

typesetting picket fence - both from simple and carved strips, including - different widths

mosaic laid out from flat transverse cuts

Cross sections of logs can be dug in or laid to your liking, for example, in a mosaic

log fence

branch fence

wickerwork

It’s quite possible to make a fence from thin branches or a wattle fence yourself

Paving slabs can be used to lay a border of any configuration that is needed for zoning your lawn

A fairly simple decorative fencing for flower beds with your own hands - edging a flower bed with wooden chocks. For this, logs of approximately the same diameter can be used, and 20 cm should be added to the required height of the fence - to this depth they are buried in the ground. Before installation, the logs are cleared of bark and treated with an antiseptic to prevent rot.

A fence made of wooden blocks will be strong and stable if it is dug to a depth of about 20 cm. To protect against rotting, the wood underground should be wrapped in roofing felt tape

In addition, the bottom of the logs can be wrapped in roofing material - this will reliably protect the wood from ground moisture. A ditch is dug along the perimeter of the planned flower bed, 20 cm deep, logs are placed tightly and evenly in it and, compacted well, they are covered with soil. If the tree is well protected from moisture, such a fence will last for at least ten years.

How to make a wooden border with your own hands - details in the video:

Stone fencing

Stone (meaning brick, paving slabs, natural and artificial stone) fencing can be erected either using dry masonry (fencing elements are held in place by friction and gravity), or using lime, clay and cement mortar. In addition, stone can be combined with other materials (wood, stone). It is very durable and reliable fencing, but at the same time very expensive.

Stone fences for flower beds are more expensive to create than others, but durability and beauty pay for it

Difficult work the creation of high fences for flower beds made of stone can be continued with mosaics in the same theme on garden path

The variety of shapes, configurations, sizes and colors of paving slabs allows you to use them for fencing even the smallest flower beds. And thanks to his neat appearance, paving slabs will harmoniously fit into a fragile flower arrangement.

Monolithic border blocks and paving slabs are very suitable for demarcating a lawn and creating fences for flower beds.

A garden border can also perform a drainage function (the so-called “dry stream”)

It is convenient to make fences for flower beds of any required height on uneven areas from stone or brick

Metal fence

Forged, cast or welded fences made of cast iron or iron look stylish and expensive, and are very durable. Very often they are made individually, and the customer himself chooses required size sections and sketch of the drawing. Such fencing looks expensive and stylish, and is characterized by high durability. The only one significant drawback- high price. Plus, not every design will fit logically and naturally with a wrought-iron fence. Forged gratings can also be used as a support for climbing plants.

Forged fences for flower beds look good, they can also be a support for climbing plants

Easy to install concrete molded garden border: using rubber mallet it is firmly driven into the ground

Rusty ones look stylish in the garden steel structures. Rusty pipes driven flush into the ground make an excellent base for a composition with pebbles and succulent plants.

Plastic fencing

Plastic attracts with its excellent performance qualities: immunity to moisture and temperature changes, it is not hygroscopic and durable, and retains its shape perfectly. A plastic fence is easy to install and equally easy to dismantle, replace or rearrange. A huge plus - big choice sizes, shapes, sizes and colors, it’s easy to choose a plastic fence to match your landscape design style. There are borders that quite accurately imitate stone, wood or brick.

Plastic fence made of separate sections- easiest to install

Multi-level plastic flower bed

The main options for plastic fencing:

sectional fences - different color and configuration, small in height, they already have durable cast pegs at the edges. To get a fence, you just need to drive the pegs into the ground

Sectional plastic fences are the easiest to install and maintain.

Plastic fences can imitate wood; it looks nice and natural, and is doubly convenient to install: you won’t need to ensure that the wooden chocks are the same size

plastic border - flexible tape in a roll. With its help, you can get a flowerbed of any, the most bizarre shape, or fence off a path that bends along the flower bed. The border tape can be either smooth or have textured surface: corrugated, imitating stone or brick.

Sectional plastic borders also come in the form of a tape. They are easy to transport, install and maintain

Installing plastic fencing for flower beds with your own hands will take a minimum of time.

Advice!Before installation, unfold the plastic border and place it in the sun - it will become softer and more flexible, making it easier to install.

Plastic fence with imitation bark on log cuts it looks most natural and very neat

To begin with, dig a ditch around the perimeter of the planned flower bed (the depth depends on the purpose of the border; to protect it from roots, the border is buried deeper). Measure the tape to the required length, and so that the ends do not diverge, fasten them with a stapler. Place the curb tape in the recess and fill its lower part, compacting it well.

Advice! Along the outer edge, the border can be decorated with small pebbles, crushed stone, cut bark and other bulk materials.

A plastic fencing tape will reliably separate the lawn and the flower bed, so you can indulge in varied decor: pebbles, bark, crushed stone

Light, low, openwork wrought-iron fences will decorate almost any garden. For flower beds with tall flowers, you can choose the appropriate height of such a fence, and it will provide good review colors

Available materials

A fence made independently from scrap materials will make the flower bed unique and attractive. The most famous fence for a flower bed made from scrap materials is a fence for a flower bed made from bottles: plastic or glass.

From plastic bottles dug into the ground you can create garden borders any length

To install such a fence, you will need to dig a shallow (about half the height of the bottle) trench and place the bottles tightly in it. To prevent the PET bottle from losing its shape, it must first be filled with sand, earth or small pebbles.

A strong fence for one or several small flower beds can be made from car tires (they can be painted)

To make a flowerbed fencing with your own hands from scrap materials, you can use unused vinyl records, almost half “drowning” them into the ground. As an option, the discs can be replaced with porcelain plates left over from dismantled sets.

Just like seashells, suitable for a decorative fence and painted plates from disassembled sets

Below - step-by-step instruction how to make a concrete border for a flower bed on a lawn with your own hands

Using a rope or hose, lay out the contours of the future border. Along this contour, dig a trench about 20 cm wide and about 10 cm deep and compact the soil in it

Drive in wooden blocks measuring 2.5x2.5x30cm at a distance of about 45cm from each other. Use screws to attach a flexible tape made of hardboard or fiberboard to them

Prepare spacers from wooden blocks equal to the width of the trench you made, insert them every 1 meter. After this, you can pour cement mortar of a suitable, not too liquid, consistency into the trench. Smooth the surface of the solution with a spatula

After the concrete has hydrated, the surface of the curb can be finally leveled and sanded. Cover the curb acrylic sealant and leave to dry for 3-5 days. Lay the finished border in the trench on the lawn on a layer of turf

How to make a fence for a flower bed with your own hands - original ideas And useful tips look at the video: