Hard steel sponge production equipment. Dish sponges or metal sponge Dish sponges or metal sponge
Modern manufacturers are doing everything possible to make the work of housewives and everyone whose work involves organizing cleaning and washing dishes easier. One of the best modern inventions is rightfully steel wool. With the help of this accessory, washing dishes, vegetables, and almost any contaminated surfaces becomes a routine task that does not require much effort. In any home, metal sponges will find their use, remaining in their original form and condition for a long time.
Unlike products of previous years, modern dishwashing sponges are not capable of injuring the skin of your hands, rusting or falling off with small metal shavings. Proper Use allows the housewife not to change the sponge for several months, if desired, treating it with any chemicals for the purpose of disinfection.
Functional purpose
Using a high-quality metal sponge you can clean:
- dishes - any intense contamination, including burnt food from the walls of pots and pans;
- gas/electric stove – grease and old stains are easily removed;
- grill grates, skewers, and other attributes for frying food over an open fire to remove soot and food residues.
Teflon and ceramic coatings can only be scrubbed with moderate force and only if the steel wool was produced in a modern equipment. In this case, there will be no scratches on their surface, which are reported by everyone who decides to save on buying branded products by replacing them with cheap fakes.
Another popular use of metal sponges is cleaning vegetables and root crops from dirt and peel. Thus, young carrots and potatoes can be peeled, and adhering dirt will no longer damage the hands and manicure of the housewife who is busy cooking.
Dish sponges or steel wool
metal scourers production
sponges for washing dishes
dishwashing sponges production
metal sponge
metal scourers for washing dishes
metal sponge for washing dishes
Characteristics of our products
| METAL SPATH Material: stainless steel. Weight: from 12g to 70g at customer's request. Package: polypropylene bag Number of washcloths per package: |
|
| METAL SPIRAL SPATH Material: High quality stainless steel. Weight: from 15g to 60g at customer's request. Package: polypropylene bag Number of washcloths per package: at customer's request from 1 to 10 pcs. |
The main requirements for dishwashing sponges are: high water and temperature resistance, resistance to various surfactants and detergents. There are two main technologies used in the production of dishwashing sponges: in-line pressing technology and stationary pressing technology. In the first case, two-component contact adhesives are widely used, providing strength immediately after short-term pressing of the bonded substrates; the second case involves the use of adhesive compositions that cure over time.
Adhesives for foam rubber and fiber sponges are purchased at the PU INDUSTRY plant.
The pictures show an example finished products company" FiberPolymer" (Molokovo village, Moscow region), made using glue NovaCol.
The PU INDUSTRY plant offers one- and two-component NovaCol compositions for the production of dishwashing sponges. For contact gluing technology, it is necessary to use two-component polyurethane compositions in non-spray and spray forms. The principle of operation of both adhesive compositions is their double-sided application to foam rubber and fiber and short-term pressing of the product using rollers. For conventional gluing technology, one-component compositions are used, applied in a continuous layer or by spraying. These compositions are cured over time, and during their curing period, pressing is necessary.
We offer a fireproof product to our customers and buyers. own production- contact adhesive for foam rubber sponges, as well as continuous and discrete application adhesives “NovaCol”.
Vendor code: G-06
Number of pieces per package: 5 pieces.
Product size: 90x60x28
Qty per transport packaging: 50
PC.
This product ( DISH SPONGE "MAXI" 5 PCS.) is sold in bulk from the manufacturer's warehouse.
Sponges for washing dishes are modern products made of foam rubber. Additionally, they are equipped with an abrasive layer on one side to remove complex contaminants. Using sponges allows you to save money detergent: the composition lingers on the surface, is absorbed and foams better.
Production technology and materials
The production of sponges for washing dishes is a complex of complex activities using special equipment. Quality finished product depends on the production technology, as well as on the materials involved. The sponge is constantly used in aggressive conditions - temperature changes, mechanical damage, exposure to chemical compounds. Ease of use and durability depend on how the product resists external influences.High-quality products withstand the above operating conditions. Modern production, as well as materials from the world's best manufacturers, provide the product with exceptional strength and quality characteristics:
· Single sided abrasive surface. High-quality fine-grained material that adheres to the base moisture-resistant composition. The abrasive is durable and not subject to abrasion.
· Harmless foam rubber. Under the influence of chemicals or temperature, the foam base does not emit harmful substances and remains unchanged.
· Finger devices. Some models are equipped with grooves on the sides. This allows you to reduce the impact chemical agent and dirt on the fingers, and for women to protect their nails from damage.
· Variety of designs. Sponges come in a variety of colors.
Some products are additionally equipped with antimicrobial protection. It is known that kitchen sponges collect the most harmful microorganisms - approximately four million microbes per square centimeter.
Choosing a quality manufacturer
Before you buy dishwashing sponges in bulk, you need to make sure that the manufacturer offers a truly high-quality product. In this matter, it is worth focusing on well-known trade marks. It would be useful to arrange an examination to ensure the veracity of the declared characteristics. Important criterion choice - the availability of an expanded range of products and an organized delivery service.
Our company specializes in the production of dishwashing sponges. Technologists carefully monitor the product manufacturing process and select the most quality materials. The development department designs new models, expanding the existing range. Delivery has been established to all regions of Russia. We offer to buy dishwashing sponges in bulk at the best prices!
production - other
*included in price
** not included included in price
I will sell the technology for the production of household sponges for washing dishes (with a cleaning layer).
Training in all the intricacies in an existing production facility.
The main beauty is that transporting sponges over long distances is unprofitable and you can occupy a niche for this product in your region.
The profitability of this production ranges from 60 to 300%.
Productivity from 7000 pieces per shift.
Number of workers: 2 people (you can work alone, but productivity is reduced by 2 times)
home problem - technology gluing foam rubber to a cleaning layer, without the use of expensive equipment. (the technology of very strong gluing has been developed, can withstand boiling, while using the sponge, the cleaning layer is completely worn off but does not come off). I will help you with a constant supply of high-quality glue. (tried about 10 different adhesives, only this one is suitable.)
Investment in equipment for initial stage will be a maximum of $2500. You can make 80% of the equipment yourself.
Electricity consumption is minimal (with permanent job 50-100 kW. per month).
The cost of 5-piece packaging is about $0.075.
Requirements to production premises:
1. Production area from 80 sq. m. (several rooms are possible, one of which is allocated for separating the gluing of the cleaning layer onto the foam rubber).
2. Availability of 220 V power supply.
3. The presence of sewerage is not necessary.
4. The ceiling height is standard.
5. Temperature: from +10 C. (Room for gluing).
If you are interested in this offer, write by E-mail: [email protected]
ID S358675
The information in this advertisement was provided by the business owner or his representative. BusinessesForSale does not receive commissions or other payments from the sale of this business, is not responsible for the completeness and accuracy of the information provided and does not have any other information about the objects of sale. Please review before contacting the seller.