Installation of a dressing room made of plasterboard. Do-it-yourself wardrobe made of plasterboard: a new place for things Do-it-yourself wardrobe made of metal profiles

In any apartment, late or early, the problem arises of placing things that clutter the living space, which have accumulated over the years, creating a feeling of disorder. A DIY dressing room will help you organize this chaos if you successfully find a place for it.

Unfortunately, not everyone has the opportunity to allocate a room in the house for this purpose, but everyone can afford to make a dressing room with their own hands using drywall. If they find out how to install it quickly and at minimal cost.

Wardrobe functions

First of all, you need to decide on the purpose of this room.

Organizing the storage system is the main role of a gypsum plasterboard wardrobe.

Eliminating clutter in the main areas of the house is the other side of the coin. Clothes will not only acquire a permanent residence - they will disappear from the backs of chairs, sofas and other places not intended for this purpose.

The saving of space is obvious - after the construction of the wardrobe, the shelves of cabinets, drawers of chests of drawers and bedside tables, which were previously overcrowded, can be removed completely. Hinged doors will replace sliding doors - another technique for effectively managing space.

Decorative role - an apartment with a dressing room will be cleaner and more spacious. The facade is decorated with mirrors and beautiful glass, matching the overall interior of the room.

Premises requirements

The room for a wardrobe, where you can place everything and change clothes, should have dimensions of at least 1m x 1.5m. If the dressing room is closed tightly, it is necessary to provide ventilation, since clothes can absorb odors from shoes, etc.

The depth and height of the zone for outerwear and dresses is from 1.5 m, for short clothes – 0.5 m x 0.1 m. on top there may be additional areas for storing camping equipment and other seasonal items.

At the stage of designing a dressing room, it is important to understand what things and how many of them this room is designed to store. It is not worth equipping it for the future or in reserve.

Dressing room in the bedroom

If you have decided on your desires, all that remains is to choose a place where you can build a dressing room with your own hands.

To do this, we need to consider all possible options.

1. Corridor– if it ends in a dead end, it can be fenced off without any problems and this area can be managed more rationally.
2. Niche– if this is not possible in the utility rooms, you can plan a dressing room right in the bedroom, especially if there is an alcove there. Of course, the size of the dressing room will be determined by this recess.
3. Balcony– if the bedroom has a loggia or balcony, then there is no need to reduce the living space of the room due to the dressing room. Of course, the balcony must be well insulated, otherwise the drywall may be deformed, and the safety of things will be in question.
4. In the bedroom– if none of the previous options are suitable, you can sacrifice a corner in the bedroom. As a rule, this dead zone eats up a minimum of usable space, and the ergonomic model looks very impressive.

Another argument in favor of this room is that it is always convenient to change clothes in the bedroom.

Filling your closet

There are standard modules that are used to arrange this room.

1. Crossbar with hangers are used to place outerwear and sleeping bags.
2. Bottom section– drawers or shelves – suitable for storing shoes.
3. Upper sections– for hats and accessories. There may be partitions for containers or drawers for various small items.

The dressing room stores not only clothes and shoes, but also bedding and travel bags.

How to make a dressing room from plasterboard with your own hands

Before starting installation work, it is necessary to prepare the tool for work and purchase materials.

Tools and materials:

• metallic profile;
• building level;
• mineral wool (if necessary);
• hammer drill with dowels;
• screwdriver with self-tapping screws;
• spatula with putty;
• drywall knife and primer.

Step-by-step instruction:

1. Drawing. A competent sketch is half the work in this case, so it is imperative to draw a plan of the room to scale and indicate all the dimensions and details of the dressing room.
2. Marking. Checking the location of the nodes with the drawing, you need to transfer the dimensions to the walls with a pencil. The position of the profile can be marked with adhesive tape.
3. Frame installation. The supporting strip is attached to the wall with dowels, checking the horizontal level. Vertical profiles with brackets for shelves and hooks are inserted into the grooves. Distribute them in increments of 60 cm and secure. Using a hammer drill with dowels, guide profiles are fixed to the floor and ceiling. Vertical posts are inserted into the supporting profiles, orienting them parallel to those attached to the wall. Using a screwdriver and self-tapping screws, secure the crossbar and hooks to the brackets.
4. Drywall cutting. Using a knife, cut the gypsum boards into the required sizes and secure them with self-tapping screws on the inside of the frame.
5. Covering the frame with gypsum plasterboard sheets. Before covering the other side, you can lay a layer of mineral wool between the sheets for insulation.
6. Wiring. If there is a ready-made socket in the wall, this is an ideal option for installing a lamp. If this is not possible, you can agree with the electrician on the possibility of installing spotlights or LED strip. All that remains is to sew up the walls on the other side, screwing the sheets to the profiles. If the frame does not have wires and sound insulation, you can not sheathe it from the inside, but simply paint it.
7. Door installation. The best option for a dressing room would be a sliding door. If you make it mirrored, it will not only save space, but also create the appearance of its expansion. A spectacular curtain made of thick fabric is also suitable as a budget option.

Dressing room equipment

It is advisable to treat the entire surface of the drywall with putty (seams are a must). Then the gypsum board is coated with a primer. After drying, they move on to finishing - painting, wallpapering, wood paneling and other materials. The quality and choice of material depends on preferences and material capabilities.

The choice of cladding should take into account the style and decor of the room, because the outer wall should become the logical conclusion of the remaining walls. In this version, it can even expand the space. The interior space is decorated with light pastel colors, since the contents of the dressing room will add diversity.

If you have inspiration, you can also decorate boxes with containers. Decoupage, painting, patchwork - many fashionable ideas can be easily found online.

A full-length mirror is a must in your dressing room. It can be hung on the wall or made into a mirrored door. If there is enough space in the room, you should place an ottoman in the middle of the room. It will help make fitting comfortable and enjoyable. If the banquette is hollow, you can place belts, clutches and other accessories inside.

Many people find plasterboard structures as an excellent alternative to conventional bedroom furniture; in particular, a plasterboard dressing room has already proven itself to be an excellent replacement for a standard wardrobe. A built-in wardrobe made of plasterboard has the advantage of saving space in the room. It can be perfectly combined with other designs in the room and practically hide the dressing room in the wall. Many people use sliding doors to make their own kind of wardrobe out of plasterboard for storing clothes.

What is this article about?

Dressing room goals

Before you start planning, you need to decide on the main goals and objectives that your plasterboard dressing room should pursue. The structure that you will build in the future will have to meet the assigned tasks and meet all the necessary standards.

In order to correctly prioritize, you should remember a few basic rules based on which you need to plan the design.

You need to clearly fit the dressing room into the interior of the room. The design should become part of the interior, and not a separate room. Firstly, this is necessary so that the dressing room does not take up too much free space, and secondly, it needs to be hidden in the interior of the room, without changing the overall design. The main thing is that the building does not stand out from the general background. It is best to adjust it to the walls and furniture in the room.

It is very important to immediately determine the location of the door that opens the dressing room. It should be positioned so that you can easily and quickly access your clothes at the right time. It is not uncommon for a dressing room to lose a significant part of its functional component due to improper placement of doors, since the clothes in it are simply crumpled and carelessly thrown away.

You need to think through all aspects of the functionality of the dressing room. It is quite possible that you will want to put not only your clothes there, but also hide some things, such as an ironing board or a vacuum cleaner. In this case, it is better to try to make the dressing room as spacious as possible. Of course, it is desirable that the size of the structure does not increase too much, and the capacity of the cabinet does not increase due to the capacity of the room.

As always, it is extremely important to correctly calculate your financial capabilities so as not to start installing a dressing room that you simply cannot afford. Evaluate your budget well and think about how much money you are willing to spend on this or that part of the structure.

Design

Perhaps the most important stage in creating anything. At this stage, you need to calculate all the necessary materials and their quantity that will have to be spent during the installation process. More importantly, you need to draw up a sketch of the future structure to get a clear idea of ​​where everything needs to be installed and how to achieve the desired result.

Before you start creating a drawing, choose a location in the room where you want to install your dressing room. It is desirable that this be a convenient and accessible place that occupies a small fraction of the area of ​​the entire room. Once you have decided on the location, make a drawing based on the specifics of the location. It will also help a lot in the future if you not only draw up a drawing on paper, but also make all the important marks on the walls in advance, so that later it will be easier to mount the structure based on them.

The next step for you will be the installation of metal profiles. They need to be fixed to the wall with dowels and nails, and are used as guides. Once you have secured the metal guides, you can begin installing the vertical posts. Together, the metal structure forms the frame for the future dressing room, which is necessary for any plasterboard structure to hold the plasterboard sheets in a reliable and strong position. Rack profiles come in different sizes, depending on the guides themselves. You can use metal profiles with a cross-section of 50x50 or 50x100, supported by guides. It is important to remember that rack profiles must be mounted no closer than 0.6 millimeters from the walls. Between the racks you need to install a horizontal profile crossbar, which is fixed at the level of the top of the doorway.

Frame installation and sheathing plasterboard sheets

After the installation of the partition is completed, you can begin covering plasterboard sheets. In order to cut correctly, you need to use a special cutter, although plasterboard sheets are very flexible in terms of processing. They are cut very easily, which allows you to create a variety of shapes and structural elements from them. You need to cut the plasterboard sheet on both sides. This is done in order to avoid unnecessary faults. It is important to know that first of all the dressing room is sheathed plasterboard sheets from the inside, and only then from the outside. Also, you need to make sure that the screw heads fit snugly into the plasterboard sheets and do not stick out, since sticking heads can cause big problems in the future. They can interfere already at the final stages of finishing the structure.

If you are covering a dressing room plasterboard sheets only on the outside, then you can skip the next step, but if you are doing the sheathing from the inside, you will have to install special soundproofing boards. They are attached between plasterboard panels inside the wardrobe wall. It's time to start attaching shelves and additional cabinets, if you were planning to install such.

After all the wardrobe partitions have been installed and trimmed plasterboard sheets, they will need to be primed and puttied. Already at this stage you will understand how important it was to fit all the screws tightly and hide their heads in the drywall. The fact is that for putty you will have to use a spatula, which will hit the screw heads. But if you think that this problem can simply be avoided, then you are mistaken. Once you've primed and puttyed your closet, it's time for the designer trim, and of course it would be very unsightly if the trim was damaged by a screw.

Plasterboard sheets are very smooth, so paint sits on them well and wallpaper is glued to them. You can use absolutely any type of finish, since plasterboard sheets can accept any design decisions. The exception, perhaps, is natural stone. It will require special waterproof plasterboard sheets. But it is unlikely that natural stone will be a good solution for decorating a dressing room, for example, in a bedroom. A finish made in the style of the furniture located in the room will look much better. There are special paints, mosaics and other coatings for this purpose. You can also simply line the dressing room with wood.

Probably the most convenient device for storing things is a dressing room. After all, it’s really great when all the details of the wardrobe are in one place and you can immediately assess how well the set you’ve just chosen fits together, rather than running from room to room - take it, try it on, look. Moreover, you can make a dressing room in a very small area: the minimum is 1.5-2 square meters. EVEN in a small apartment it is possible to fence off such space. Moreover, it has been noticed that it is more convenient to use them if the dressing room is assembled with your own hands. It's simple: no one knows your habits better than you and can put things in the right order. So, let’s start creating our own dressing room.

Wardrobe sizes

Our realities are such that most people live in small apartments, where every centimeter counts. Therefore, issues of size often play a decisive role. The smallest dressing room can have an area of ​​1.2 - 1.5 square meters. meters. It is a rectangle with sides 1.5 * 1 meter or so. Also, a small dressing room can be corner - this option is even more spacious than a rectangular one of similar size: with an equal area, the length of the sides on which shelves and storage systems can be placed will be greater.

The smallest dressing rooms: 1.5 by 2.5 m and 2 by 2 m

A rectangular mini-dressing room should have a width of at least 1.2 m when things are placed on one side, and at least 1.5 m when placed on both sides. The depth should be such that it is possible to “enter” there. This is what mainly distinguishes dressing rooms from sliding wardrobes, and also the ability to install any doors.

Ventilation and lighting

Even in mini-dressing rooms, and even more so in large ones, ventilation is necessary: ​​in a closed room, a musty smell quickly appears, which no perfume can mask. Therefore, even when planning, find a way to make ventilation in the dressing room.

The principle of its design is no different: in the upper part of any of the walls, preferably further from the door, an exhaust hole is made into which a fan is inserted. The inflow is provided either into the gap under the doors or into special inlet openings located just above the floor level. They are closed with decorative grilles. The outlet of the ventilation duct should be into the general ventilation system; you can use plastic boxes to take it outside or under the roof of a private house. Air exchange organized in this way effectively maintains the normal state of things.

Principles for organizing ventilation of a dressing room through a bathroom

When choosing a fan, you should pay special attention to the noise level. Since dressing rooms are often located in or close to bedrooms, noise should be kept to a minimum. It can be controlled automatically or turned on/off using regular or.

The lighting should be bright. Firstly, this is necessary to quickly find things, and secondly, dressing rooms are often used as fitting rooms to immediately see how well the selected items fit together. The mirror is usually placed on the door or mirrored doors are made. In this case, the light should be directed not only to the shelves and storage systems, but also to the fitting area.

You can use lamps of any type, but it makes sense to make them turn on from motion sensors. They opened the doors - the lamps came on, there was no movement, they turned off. There is another option for swing doors: there are lamps with buttons that light up when the door is opened and turn off when they are closed.

Where to do

Even in small apartments there are “appendicitis” that cannot be used normally. This is where you can make a dressing room.

Another popular option is a pantry. In this case, everything is generally simple. You remove everything unnecessary, change the doors and install the appropriate content: racks, racks, baskets, shelves.

If there is nothing like this in the apartment, they fence off part of the room - the end or the corner - you need to look at the layout. The good thing about a corner dressing room is that it allows you to use the most difficult areas to arrange, namely the corners. Especially if there are closely spaced doors in two adjacent walls. This zone is considered “dead”: you can’t put anything there except a small corner shelf: everything will get in the way. About the same option - two windows or a window and doors.

If the area turns out to be too small, it is possible to increase it a little, making the wall not flat, but with the middle extended slightly. This will not reduce the area of ​​the room much, but much more things can fit.

They are also made on the loggia - by making part of the glazing opaque or by building a wall. Only here you can’t do without insulation - it’s unpleasant to wear cold clothes in winter.

The second option is suitable for wide loggias. In them, shelving can be placed along a long wall.

In the corridor or hallway, a corner or “appendix” is also fenced off, if the layout allows. Here everyone can decide only by location: there is a place for this or not.

A dressing room is most appropriate in the bedroom. This is simply the best place to store things: in the sense that it’s more convenient to dress here. Therefore, for these purposes, part of the room is fenced off. In this case, this technology has long been known and worked out to the smallest detail. It won’t take much time even if you have no experience: a maximum of two to three days for assembly and finishing.

If you make a partition from gypsum board or gypsum board according to all the rules, you will need double cladding, and this will “eat up” centimeters, or even meters, of area. Therefore, most often they are sheathed only on the outside, but in two sheets with overlapping seams. When assembling the frame, do not forget to make reinforced racks for fastening the door. With single cladding, exposed profiles remain inside, but it is convenient to hang shelves-baskets for things on them. If you plan to do this, then take them with a thick wall so that they can hold the weight properly.

The partition can be made from or slabs. This is an option for those who do not like to bother with putty. But you need to choose a lamination that will fit into the interior without any problems.

Doors for dressing room

What’s great about a DIY dressing room is that you can install any kind of door: sliding, “compartment” type, accordion type, regular hinged, or hinged on rollers. You can even get by without them at all. This option is called a wardrobe-rack, but then everything will have to be kept in perfect order: everything is in sight. The most budget option is thick curtains or something like a Japanese curtain.

If the front wall turns out to be large, part of it can be stationary, and part of it can be occupied by doors. In this case, you can also somehow use it on stationary walls. If desired, the doors can be made full width, or consisting of fragments.

Option for a dressing room in the attic: a side part with a low ceiling is occupied for it. Full-width doors make it easier to get to things

The design can be anything as long as it fits into the appearance of the room. If desired, they can be made to match the walls so that they are not visible, or they can be bright and conspicuous.

Arrangement: filling and storage systems

If the area is limited, there is no point in making furniture from wood, MDF or chipboard into the wardrobe. They take up precious centimeters of space and also interfere with air movement. Another disadvantage is that redoing something is problematic.

“Standard” type furniture takes up too much space

Recently, the general trend is the installation of lightweight metal storage systems. They are modular and assembled on special racks. Racks can be attached in two ways - to the walls or to the ceiling and floor: different manufacturers make different systems. And everything that is needed is hung on these racks.

The racks can have notches along the entire length, which makes it possible to install any element at any height. These are the most mobile systems that can be modified easily and simply - simply by moving them from one row of notched hooks to another, arbitrarily changing the height of the shelves and baskets, and other elements.

There are racks of rectangular cross-section, with grooves cut on both sides. The necessary components are attached to the clamps in these grooves.

Please note that there are different shelves and drawers - made of wood or wood materials, metal - chrome-plated or painted. They can be retractable, they can be placed one on top of the other or on shelves.

All these systems are sold: racks and a list of various components. But they are produced mainly in European countries, so the price is high. An economical option for dressing room equipment can be made independently from a round chrome-plated furniture pipe and various fasteners for it. It turns out that this furniture is not as mobile as we would like, but it costs significantly less.

Devices for placing clothes

In addition to standard and not so standard drawers and shelves, there are interesting special options. For example - skirts or trousers. Special guides on which the transverse strips are attached, sometimes they have clips. They allow you to hang your skirts/pants straight and not be afraid that they will fall. It is convenient if such a hanger extends, allowing you to inspect all the contents.

One of the options for filling a dressing room is a bracket for skirts or trousers

This device can be replaced with a simpler one, but much cheaper - a hanger with crossbars located one below the other. It's not as convenient, but it allows you to organize your clothes just as well.

There is a retractable design for ties, only it is usually oriented differently and extends out in length, although not everyone likes such a system, but prefers folded drawers into cells.

There are several ways to place hangers. The simplest are pipes, the more economical (in terms of space use, but not in terms of money) are tie-like retractable brackets.

Another device is a pantograph for clothing. This is also a pipe, but capable of descending. A kind of lift for clothes. This device allows you to use the space right up to the ceiling, without compromising your comfort. It can be attached either to the side walls (the more common option) or to the wall. There is a handle-bar attached in the middle of the pipe, by pulling which you lower it to a horizontal position. The carrying capacity of such devices is usually small (up to 18 kilograms), so they are used for lightweight clothing.

Furniture pantograph - for light (by weight) clothes

Shoe storage systems

Problems often arise with storing shoes: some people have dozens of pairs of them, so it’s time to arrange separate dressing rooms for them. But among the standard sets of equipment there are several interesting ones for storing shoes.

Let's start with the retractable system. IKEA has it. Pins with shoe modules mounted on a movable frame. Convenient, compact.

There are mini chests of drawers that do not take up much space, but are hung on the walls, and there are hanging organizers that can be easily placed on a horizontal pipe.

These are mini chests of drawers on the wall

In general, there are many interesting ideas for shoes that allow you to place them compactly and at the same time conveniently. Some are in the fogo gallery.

Such “rotating” boxes are very convenient not only for shoes, but also for small items and linen. A way to store boots is on hangers with clothespins

There are very inexpensive options. For example, the seasonal one, which is currently in use, can be stored on a grid with rearrangeable hooks or wire shelves. You've probably seen similar ones in stores. This is a mesh or perforated panel on which hooks/shelves are hung. Convenient: you can move it under any type of block, make the distance larger or smaller.

An economical option for storing shoes - a mesh with hooks and shelves

Hanging such a grid is not a problem - even on a wall, even on the side surface of a cabinet or door. Hooks and shelves simply cling to the crossbars. This option is ideal if you are short on money and space. If you like the idea but need something more presentable, make or find a perforated metal shield on the frame. Hooks are also inserted into it with a bang.

Modification - shield with hooks

In general, when arranging a dressing room and on a limited budget, you should look for storage systems not in furniture stores - online or offline. It’s better to look at sites that sell commercial equipment. There are many interesting devices that save space: stores also try to display the maximum amount of goods in a minimum area. For example, these are shoe racks.

If you attach wheels to the first one, you get an excellent retractable system. The price of such equipment is much lower than similar equipment, which is sold in furniture stores.

Making a dressing room project

As you can see, there are a lot of ideas for equipment and storage systems. But so that it doesn’t turn out that the great thing you bought simply doesn’t fit into your wardrobe, you need to draw a plan on which to indicate all the dimensions and dimensions. It is drawn to scale, then you mark on it those parts that must be present. They are drawn to the same scale. If everything “fits in”, armed with the dimensions (you have them, or you can measure them in the drawing and, using the scale, calculate the real values), you can go to the store to choose systems.

There is another approach. Find out the dimensions of the devices and systems you like (installation dimensions), cut them out to scale from cardboard or thick paper and try to combine everything. If it works, great, you can buy it. No - look for other options. As a result of your efforts, you should end up with a layout approximately like the one in the photo.

To make it convenient to use the equipment and get things out, you must maintain the following distances:

• minimum distance from shelf to shelf:
  • when storing things - 30 cm;
  • when storing shoes (without stilettos) - 20 cm;
• shirts, jackets, jackets - 120 cm;
• trousers:
  • folded in half - 100 cm;
  • length - 140 cm;
• compartment for outerwear - coat - 160-180 cm;
• for dresses - 150-180 cm.

At the very top we reserve space for clothes from a different season or rarely used items. There is often a place for a vacuum cleaner at the bottom, and a built-in ironing board is installed in one of the cabinets.

For those who like to work with their hands, here are several diagrams with dimensions so that you can equip your dressing room with your own hands (at least partially).

Drawing of a shoe rack with dimensions

Shoe storage system made of plastic pipes…

Every girl and woman dreams of a fashionable dressing room in her apartment. This design is becoming popular. This is very convenient, even profitable to some extent, because things will be in place, and the room will become more spacious, since additional cabinets and other pieces of furniture for things will no longer be needed.

There you can place the clothes you are using now, and those that the time has not yet come to wear. In addition to clothes, various accessories and shoes are stored there, as well as an iron and ironing board. All dresses, blouses and other things will be in one place, where you can change clothes. The dressing room will not take up much space

A dressing room can save space in the bedroom

How to build a dressing room from plasterboard with your own hands

If you are the owner of a small apartment, there is no reason to give up a dressing room. It will help save a lot of space. Be sure to follow the rules, the result of the work done will please you. A dressing room is a small room that should fit into the overall decor and become an integral part of the room. Consider carefully where the door will be located to ensure optimal access to things.

Capacity and versatility are important components when planning a dressing room. If the apartment is small, you can store an ironing board, dryer, and vacuum cleaner in it. The issue of construction cost is very relevant. Everyone's capabilities are different, and expenses should not undermine the family budget.

When creating a dressing room, follow the rules for organizing such a design

Subtleties of wardrobe design: requirements for wardrobe space

The minimum size of a dressing room should be 1x1.5 meters, but no less; with this size it is quite possible to accommodate what you need. Ideally, the area will be larger so that there is enough space for changing clothes, but if the room does not allow for a large dressing room, this is also a good option.

To prevent things from absorbing unpleasant odors, it is advisable to install ventilation. The area where outerwear and dresses will be located should be 50 cm deep and 1.5 m high; for short items: 50 cm deep, 1 m high. An auxiliary storage area can be equipped on top.

It is advisable to make ventilation in the dressing room

Interior furnishing options

When all work on the construction of the structure is completed, you need to think about the internal contents of the dressing room, how to place shelves, racks, brackets, and additional drawers. The area for casual clothing should be in an easily accessible place. The upper part of the dressing room is used for compartments for clothes on hangers. You can use a device that allows you to lower sections.

If you want to store shoes in the same room, you will need lockers, preferably lockable ones. At the very top you can place compartments for things that you hardly use. If the dressing area allows, install a large mirror.

You can store shoes in the dressing room

It is important to think through everything correctly when organizing a dressing room, to determine in advance the sectors for clothes, shoes, things and accessories, and their location. This will make it easy to find what you need and help increase the service life of the items stored there.

A properly organized dressing room involves several compartments.

A dressing room cannot be complete without all kinds of holders and drawers for clothes and accessories, bags and much more.

The issue of organizing space in the dressing room needs to be approached correctly

What to consider before starting work

Before you start equipping your dressing room with your own hands, it is important to pay attention to the following points:

1. First, think about where the structure will be located. It is easy to find a suitable place in a private house. It will be a little problematic to do this in an apartment. It’s good if there is a storage room or niche. Otherwise, you need to allocate part of the room.
2. Secondly, decide on the area. The optimal option is 6-8 sq. m, minimum 1x1.5 m. It all depends on what, besides things, you are going to store there.
3. Thirdly, how to correctly place the door, whether it is a compartment or a simple one. Moreover, you need to install it yourself correctly, otherwise problems will arise.
4. Fourthly, proper organization of the interior space of the dressing room. Everything needs to be thought out in advance in order to make changes later.
5. Fifthly, optimal costs. If your financial capabilities allow, you can purchase a larger cabinet or hire craftsmen. If you want to save money and also have certain skills, you can do all the work yourself, spend only on materials and accessories.

The organization of space in the dressing room needs to be thought out in advance.

How to make it cheap and easy

Here are several options on how to save money and simplify your work when arranging a dressing room.

• If you decide to design it in the corner of the room, you should choose a spiral hanger. Its cost is lower, and you can fit a lot of things.
• Another optimal option is a half-deep cabinet with regular rods. The shelves are shortened, making it easy to keep things in order.
• When arranging a dressing room, you can save money by using plastic or wire baskets and open shelves instead of drawers. For bedding, use drawers without dividers. For ties and belts, a regular kitchen rail is suitable. For clothes, purchase universal hangers. To save money, backlighting is not needed.

We hope that these tips will help you properly distribute your family budget.

To properly organize the space in your dressing room, you can use the advice of experts

Drywall installation

How to make a dressing room from plasterboard with your own hands? If you wish, you can make a dressing room yourself; if you are familiar with construction, it will not be difficult for you, but for beginners it may not seem such a difficult task. Not everyone has an extra room in their apartment to equip a dressing room, but you can build one from plasterboard in any part of the room.

Having prepared everything you need, start working. First you need to make a drawing, then transfer the dimensions to the walls. It is better to mark the places where the guides will be with masking tape.

If you are familiar with construction, making a dressing room yourself will not be difficult

The markings are done, start installing the frame. We fix the support strip to the wall with dowels, so that it is level, we use a building level. We place vertical profiles in the recesses; they should have brackets for hooks and shelves, and fix them. The distance between the profiles should be 60 cm. We install guides on the ceiling and floor. We place vertical posts in the grooves. We fix the crossbar and hooks with self-tapping screws.

After the markings have been applied, you can cut the drywall

The next stage of work is cutting drywall sheets of the required size. Then we screw it onto the self-tapping screws inside the structure. We sheathe the outer side of the gypsum board. We use mineral wool as insulation and place it inside the sheathing. A lamp is suitable for illumination inside the dressing room, but if there is no socket inside, then use an LED strip or spotlights. For this design, the most ideal option would be a mirrored sliding door. This will visually expand the room and make it brighter.

Now we treat the gypsum board sheets and seams with putty. Then we prime the surface. Let it dry thoroughly. We move on to the finishing touches: wallpapering, painting, or sheathing with wood or other material. It all depends on your taste and, of course, financial capabilities. The main thing is that the decoration is in harmony with the overall interior. It is better to use calm colors inside the dressing room.

After installing the structure, you need to putty the seams

Tools and materials

The following tools will definitely be needed: a building level, a spatula, self-tapping screws, dowels (6x50 mm), a special knife for cutting plasterboard, a screwdriver with attachments, and a hammer drill.

What materials are needed for work:

• plasterboard (permissible thickness 15 mm, since the structure will not be subjected to loads, and humidity is within normal limits, it makes no sense to spend money on the auxiliary properties of the material),
• profile PS-2 5x5 cm, guide profile, mineral wool (for insulating the room),
• putty,
• primer,
• Chipboard + fittings for drawers and shelves,
• mesh for sealing seams,
• door + necessary fittings,
• everything you need for finishing,
• wires,
• lamps,
• socket.

Before you start work, you need to prepare all the necessary tools

Finishing a new dressing room

It’s up to you to decide what style and what color scheme your dressing room will have, show off your design skills. Here you need to take into account the type of dressing room - is it a separate room or is it located inside the room.

For finishing the inside, choose materials that are suitable in style and suitable for wet cleaning. You should not use fabric as finishing because of its ability to absorb moisture and attract dust. Also, do not lay carpet. Materials suitable for interior decoration of a dressing room are PVC film, plastic panels, wood or MDF, washable paint. So rely on your taste and financial capabilities, and don’t be afraid to experiment.

To decorate the dressing room, use materials that do not absorb moisture and dust.

The flooring can be the same as in the room where the dressing room is located. You can use laminate, linoleum, parquet; it is better to avoid carpeting. The finishing of the ceiling is not so important, leave it unchanged or use wallpaper, panels, suspended ceiling, or even just paint it.

Any floor covering can be used

Convenient dressing room in a niche: are the efforts justified?

Often in old houses, or more precisely, in apartments, the layout has such a structure as a niche. How can it be used? One of the options is to arrange a dressing room with your own hands. It will fit perfectly into the interior and you won’t have to set aside space for it in another room, especially if the space doesn’t allow it. A dressing room in a niche will allow you to avoid unnecessary expenses for its arrangement, and there is no need to buy a wardrobe that will take up this entire small area. It’s better to spend money on “loft” and “bowsery” - these special structures have mobile cabinets, which will simplify the work. When choosing wardrobe doors, be guided by where the niche is located so that they match the interior.

Video: DIY dressing room made of plasterboard

Video: How to make a cabinet from plasterboard

Are you wondering how to make a dressing room in your room, but don’t know what material to choose for the walls? To build a dressing room in an apartment, lightweight plasterboard partitions that you can build with your own hands are suitable. The article shows photos of the process of building the walls and ceiling of a dressing room measuring about 3 square meters. meters.

As an example, we consider a room measuring about 20 square meters. m., which is a passage. During the major renovation, it was decided to isolate it (make it non-passable, with its own door) and separate a part for the dressing area. The size of the dressing room was 3 square meters. m., the remaining residential part is 15 sq. m. m, with 2 sq. m. became a corridor. The initial ceiling height was 2.5 m; after installing a suspended plasterboard ceiling, the height decreased to 2.4 m.

It is worth remembering that any redevelopment must be coordinated with organizations dealing with these issues, for example, in Moscow this is Moszhilinspetskaya.

Making a dressing room with your own hands

Along the perimeter of the future walls, PN profiles are installed on the floor and ceiling. At this step it is important to maintain perfect accuracy; the ceiling profiles must be clearly above the floor ones. A plumb bob or laser level should be used. In places where doors will be located, floor profiles are not needed. For fixation to the floor and ceiling, dowel-nails or other suitable fasteners are used, depending on the material of the floor and ceiling. To improve sound insulation, a strip of polyethylene foam is laid under all profiles attached to the ceiling and walls (later also under hangers for attaching a suspended ceiling).

The width of the PN and PS profiles is selected depending on the desired thickness of future partitions and can be 4.2, 5, 6.6, 7.5, 10, 12.5, 15 cm.

After this, the vertical ribs of the future structure from PS profiles are installed. The distance between two adjacent vertical elements is 60 cm in the center of the rack elements. This is necessary for the strength of the structure; sheets of plasterboard will be screwed to the profiles in the future.

Vertical ribs must be installed along the walls and fixed to the walls to increase the strength of the structure.

To connect the profiles to each other, small metal screws or rivets are used (if you have the appropriate tool).

Then horizontal stiffeners from PN profiles are installed. The distance between them is 60 cm. In the example under consideration, you can see squares formed from profiles - this is a blank for niches that will be located on the side of the corridor in the future. If decorative elements are not provided, then a uniform vertical-horizontal grid of profiles will be sufficient.

The next step is the installation of a support structure made of metal profiles for the suspended ceiling. At a distance of 5-7 cm from the ceiling (we also take into account the height of the lamps built into the ceiling), a PN profile (27-28 mm) is attached to the concrete walls and the already erected frame of future partitions along the entire perimeter of the dressing room. It is important to maintain horizontality, otherwise the ceiling will be blocked. Transverse elements made of PP profiles are attached to the formed frame at a distance of 60 cm from each other.

The entire structure is fixed to the ceiling with direct hangers. Using crabs, we install sections from the same PP profile perpendicular to the installed ceiling profiles - we get the frame of the future ceiling.

It is advisable to strengthen the openings of future doors with timber, which is inserted into the profile and fixed together with it.

The frame of the future walls and ceiling is ready, you can start attaching the plasterboard sheets. In this example, sheets of size 150 by 60 cm, 12.5 mm thick are used. They are no different from the usual large sheets, but they can be brought from the store in any passenger car and fit in a small elevator. In addition, they are convenient for one person to attach.

We cover the inner surface of the walls with plasterboard. Sheets of drywall are screwed around the perimeter and along all the edges of the metal frame. It is important that the edge of the sheet does not hang in the air, but is located on the profile. When working with small sheets of drywall, this should be taken into account during the construction of the frame.

At the same time, we are laying wires for lighting devices, sockets, and switches. To ensure safety, the wires are laid in a corrugated pipe.

To install sockets and switches, we use socket boxes for plasterboard with plastic clips.

Having finished and checked the laid electrical wiring, we lay sound insulation in the partitions and sheathe them from the outside. The insulating material is cut into rectangles to fit the cells of the metal frame, installed in the frame and covered with a sheet of drywall.

In parallel with covering the walls, you can also cover the ceiling.

To install built-in lamps on the ceiling, holes are cut in the plasterboard sheets according to their installation size.

Once the entire structure is ready, you can begin to putty.

The entire surface to be puttied is treated with a primer. The joints of the plasterboard sheets are reinforced with serpyanka (or other similar tape) and puttied separately, like the heads of the self-tapping screws. After the first layer has dried, a perforated corner profile is installed on the outer corners of the structure on the putty, which will make them perfectly even and the entire surface is puttied.

The photo shows that along with the structure for the dressing room, a decorative ceiling element for the room was erected, but it is not considered in this article.

Typically, one layer of putty is sufficient for drywall, however, in some cases, 2-3 layers may be needed to make the walls even. After each layer has dried, the surface must be sanded and treated with a primer.

Having completed all the rough work, we begin painting the ceilings and wallpapering.

This is what the entrance to the dressing room looks like after all construction work is completed.