Interior doors made in Ulyanovsk. Old doors look like new! DIY wooden door restoration

Restoring doors with your own hands allows you to return them to their former beauty. This process requires accuracy and a certain amount of perseverance. But the result is excellent.

Don't rush to throw away your old door designs!

Even very good wooden doors lose their beauty over time. appearance and fall into disrepair. The coating on them fades and wears off, the canvas becomes deformed and dries out, and when opening and closing the door structures emit plaintive sounds and heartbreaking creaks.

These problems are solved by dismantling old doors and installing new ones. But not every person is ready to shell out a considerable amount of money for the purchase. There is an exit. It consists of repairing and restoring old structures. Restoring wooden doors with your own hands is a very real operation. If desired, any of us can do it.

The most vulnerable point of the old door designs Wood is considered their decorative covering.

In most cases, we decide to change the interior door precisely because it loses its attractiveness. But it is relatively easy to return the decorative properties of a product.

The only important thing here is to take a comprehensive approach to repair and restoration work so that you are completely satisfied with the results. Let's take a closer look at how to restore painted and varnished wood doors.

The first stage of restoration work - preparing the doors for restoration

Door repair begins with dismantling the wooden panel. Theoretically, you can try to remove the old decorative coating from a solid structure, but this approach is not justified, since the work will be associated with a large number of difficulties and inconveniences. And the end result will not be the best - pieces old paint will still remain on the canvas. Who needs such a restoration?

The repair work schedule is as follows:

1. We remove the door from its hinges.
2. We remove all existing locks, handles, latches and other fittings from the structure.
3. We remove the glazing beads that hold the glass on the door leaf (if, of course, there are any).
4. We install sandpaper on the grinder and begin to sand all accessible areas of the door. This treatment makes it possible to remove the top layers of old paint and even small dents in size and depth.
5. We drill out wooden connecting tongues - pins - from the canvas round shape opposite the lintels at the corners of the door. Some doors do not have these connections, which means you can skip this step and proceed to the next one.
6. We separate the wooden door into separate boards using rubber mallet. You need to act very carefully. Hammer blows should be applied to the edges from the center of the canvas.

Now you can take it, heat the boards with it and remove the old coating without any problems using a spatula. Please note - the hairdryer produces very high temperature, so it must be used with extreme caution.

The second stage - achieving pristine cleanliness of the door

After removing the paint from interior designs Using a hairdryer and a spatula, it is advisable to once again clean the boards with abrasive sandpaper, and then polish them. Polishing is also done with sandpaper placed on a grinder. For rough mechanical cleaning, we recommend sandpaper with a grain of 200 or 100, for polishing - with a grain of 400.

Experts advise collecting dust that forms when polishing the door leaf. It is excellent for repairing serious damage to the door structure. The collected dust must be mixed to a thick paste-like composition with PVA glue and the deep damage on the door leaf must be filled with this mixture. Simply press the homemade paste into the potholes, wait a day for it to dry, and then use fine-grit sandpaper to sand the repaired area.

If there are no deep defects on the canvas, there is no need to make a homemade leveling compound. Use regular putty and wood putty. Just remember to sand and sand the restored areas.

The door planks are then treated with drying oil or stain and the canvas is assembled. I don't think you'll have any problems with this. The individual components of the structure can be fixed to each other using PVA glue. It is recommended to buy new beads for fastening glass. Their cost is minimal, and you do not have to deal with cleaning old products.

On this renovation work are considered completed. Now you can decorate your interior door using the methods and materials you choose. We describe the most popular of them below.

We select and apply decor to restored doors – there are plenty of options!

The final stage of restoration work is the process of applying decorative covering on a wooden door. Most often it is painted. The procedure is performed with a sprayer, roller or. Choose the tool that suits you. At the same time, remember that beautiful and high-quality coloring is guaranteed only when applying paint in several layers. Moreover, each layer must dry for at least a day.

Other ways to decorate doors:

1. Pasting with fabric, photo wallpaper and even plain paper. Wallpaper should be pasted special compounds. A paper decorations, made with your own hands (drawings for children's rooms, photographs from glossy magazines, and so on), with PVA glue.
2. Application to door structure various images and drawings, painting doors in different colors.
3. Sandblasting or stained glass design. Popular decor options these days that are suitable for wooden doors with glass. You can paint stained glass windows yourself, but you will have to order sandblasted images from specialized workshops.
4. Application of vinyl stickers. Great option design of door structures for children's and youth's rooms.

We hope the following instructions will help you to qualitatively restore and decorate your interior doors. Good luck!

If you look with horror at your interior doors with peeling paint that no longer hides imperfections with adhesive film, chips and cracks, but your budget is down to the last penny, it’s time to start restoration. It is this measure that will allow you to quickly and efficiently restore the door without resorting to purchasing new doors.

Typically made from plastic, glass, wood and its derivatives. And there is a mass various methods restoration, however, the most main stage– this is cleaning and preparing the canvas. It is important to carefully remove all traces of paint, grease, old seals, and level the door so that the door looks like new in the future.

We are preparing a wooden door for restoration. Removing fittings and paint

The first thing to do is to carefully remove the door from its hinges and place it on the floor or four stools.

Hinges can be invisible, mortise, screw-in, card removable or non-removable. Since the entire door leaf will be restored, the hinges must be temporarily completely dismantled. To do this, unscrew all the bolts and caps, pry the door from below with a crowbar, lift it, remove it and set it aside.

In addition to the hinges, you should remove all other fittings that will interfere with further work.

Video - How to quickly remove a door from its hinges

How to remove paint. Method one - grinding

If the door is flat and there are a lot of layers of paint, you should take the canvas outside and try to clean it grinder. The work is quite dusty, the grinding wheels quickly become clogged, but the result will not be long in coming.

The second method is the use of chemistry

You can find various solvents and old paint destroyers on sale. One of them is B52. Operating principle: wetting the surface, waiting, cleaning the peeled coatings with a spatula.

In addition to the fact that this work is very hard and harmful (solvent vapors are unsafe for health), it is worth noting that chemistry cannot cope with big amount layers of old coating. Therefore, this method is only applicable for cleaning small plots doors with thin layer old paint.

You can make your own paint remover mixture by mixing caustic soda, water and oatmeal to a thick consistency. This slurry should be distributed over the canvas, and after 30-50 minutes, cleaned off with a metal spatula along with the swollen paint layer.

It is important to use gloves and a respirator!

Method three - using a gas burner

For reasons fire safety, work must only be carried out outdoors. Paint heated by a torch comes off easily, but at the same time it can smoke and emit pungent odors.

This method is applicable only if you know how to handle a burner, have prepared a sufficient supply of cylinders and are ready to warn your neighbors about the upcoming work.

Method four - using a hair dryer

This method is the most productive and safe. Even if there are layers of paint on the door that were applied several decades ago, they will peel off easily, and there will be no burning or chemical smells during operation.

Heat the paint and scrape it off with a sharp spatula. Be careful not to damage the wood. Do not lean over the door, as the air temperature is about 600 degrees.

Method five - soft blasting

The method involves gentle, careful removal of complex contaminants and old paint and varnish coatings from metal, glass, and wood. Wherein door leaf will not be damaged. When working with a jet compressed air Armex biodegradable cleaner will be applied to the door surface.

The main disadvantage of this seemingly ideal method is the inability to perform work at home, the need to deliver the door to a workshop and the associated costs.

Method six - Using a drill and attachment

Stores sell special abrasive brush attachments that fit onto the drill. Metal fibers will remove old paint, but may damage the wood of the canvas. To process the entire door, you may need not one, but several replacement nozzles, the cost of which is 120-170 rubles per piece.

Video – Soft blasting

Plastering a wooden door

After all layers of old paint have been removed, you should take sandpaper, secure it to the holder and carefully sand the door, making movements along the grain line. This measure will allow you to remove paint from hard-to-reach areas and smooth out scratches and chips.

After sanding, vacuum the door and wipe it with white spirit, degreasing it.

Open the can of primer, mix and apply a thin layer of the mixture to the door. will extend the life of wood and serve as the basis for new paint coating. Average consumption primers – 100 grams per 1 square meter canvases. average price packages weighing 2.5 kg - 280-350 rubles.

Using a narrow spatula, apply the mixed wood putty. Distribute it and leave to dry. After this, you will have to treat the entire door again with fine-grained sandpaper to eliminate all the smallest defects.

If there is a large, deep crack on the door, it can be eliminated by selecting a piece of wood that is suitable in size and color. We coat the sliver with wood glue and firmly drive it into the crack. After about a day, the glue will dry and the door will be ready for priming, puttying and painting.

Prices for popular types of putty

Putties

Strengthening the door

If your door has dried out from age and is no longer strong enough, it is recommended to strengthen the door leaf and frame. And this must be done immediately after the preparation, but before the staining process.

If the blade is deformed, a plane will help correct the geometry. We remove excess wood with a tool, simultaneously checking the accuracy of the corners with a carpenter's metal square.

If the door had dried out and closed very loosely, a large gap was visible between the door leaf and the frame, it is necessary to cut a thin strip from plywood or board and nail it to the end of the door being restored. Then we process the rail with a file or plane, precisely adjusting the dimensions.

You can strengthen the door leaf metal corners. But so that the door does not lose its attractiveness, it is worth paying attention to the decorative carved corners and installing them (nail them with thin nails or fix them with self-tapping screws) after painting the canvas. Don't forget to buy a new one door handle, stylistically matching the curly corners.

Replacing cracked glass

Cracked or simply outdated cloudy glass is not difficult to replace with your own hands. In its place, you can install a new one, for example, matte or transparent, tinted or with a sandblasted pattern, embossed or smooth, colored or plain.

Note! If the glass has a thickness of 10 mm (triplex), then replacing it is impractical. Firstly, it is very expensive, and secondly, it is almost impossible for an inexperienced person to cope with such a task on their own.

Case 1. Glass fixed with glazing beads

The easiest way is to replace glass secured with glazing beads. It is enough to dismantle them and then remove the glass by hand. We arm ourselves with pliers and a metal spatula. We pry up the glazing bead with a spatula, and use pliers to carefully pull out the nails.

Use a chisel or knife to clean the glass bed. We take measurements. If the opening is non-standard, we make a figured pattern from cardboard. At the same time, we take into account that the size of the glass should be slightly smaller than the opening. We wipe the glass with a soapy sponge, dry it with a clean rag, transfer the design from the pattern and cut it.

Attention! Wear gloves to avoid cutting your hands. Carry out work on flat surface using a proper glass cutter.

We treat the perimeter of the glass opening with sealant, after which we insert the cut piece, saw new glazing beads with a jigsaw and fasten them with thin nails.

Case 2. The glass has a hidden fixation

If the glass has a hidden fixation, you will have to disassemble the door, unscrewing the bolts, removing the old glass and inserting the new one. Silicone cannot be used in this case, since it will be impossible to replace it later. A significant disadvantage of replacing glass in such doors is that after assembly, the panel may lose its geometry and will require editing with a plane.

By the way, instead of glass, you can use an acrylic unbreakable mirror. It is quite light, durable, highly decorative and easy to cut.

Find out about 10 best options, how to do from our new article.

Painting the door

A door prepared in accordance with all the rules can be painted. We carry out the work in two stages - applying a base layer of white paint and tinting.

We choose matte paint for wood, apply it with a spray gun or brush, moving the brush along the grain. Apply one layer, making sure that no smudges appear.

Important! If there is a glass insert, be sure to seal it with masking tape so as not to stain the surface with paint.

For tinting, choose glossy or matte paint of any color, for example, dark brown. We paint the canvas in the same way. If necessary, apply another layer, but only after the previous one has dried. The more layers of paint, the more saturated the shade will be. But don’t get carried away and create too thick a coating.

Important! Be sure to carry out preparation and restoration door frame. Otherwise, the updated door will contrast unfavorably with the adjacent wooden surfaces.

When the paint has dried, you can apply a layer of glossy varnish or begin installing door handles.

Prices for construction paint

Construction paint

Video – Do-it-yourself door restoration

Video - Master class on restoration of an interior door with a glass insert. Glass replacement

You can restore not only wooden ones, but also. Before work, it is advisable to remove the canvas and lay it horizontally. This will make the job easier.

Step 1. We dismantle or cover the door handle, peephole, and other fittings with masking tape.

Step 2. Use a wire brush or drill with an attachment to remove all traces of corrosion. Sand the surface with sandpaper (grit 80-150). We vacuum the canvas and treat it with a solvent.

Step 3. Treat the door with car polish. It is not recommended to use wood fillers as they do not adhere well to metal. Car polish will hide all dents and micro-scratches formed after cleaning the rust. Smooth out the applied polish with a spatula. The drying time of the composition is about 30-40 minutes.

Step 4. Polish the entire surface of the door with 400-grit sandpaper. Wipe the door with a clean damp cloth, and then degrease using a grease remover.

Step 5. Apply an anti-corrosion primer for metal to the door. It is convenient to use a roller and a narrow brush. After completely dry layer of primer, sand the canvas again with fine-grained sandpaper.

Step 6. Paint the door with metal paint. There can be several layers, but each subsequent layer is applied only after the previous ones have dried. To apply paint we use a roller and brushes or a spray gun. Don't forget about gloves and a respirator.

Similarly, we clean and paint the door frame, then remove the masking tape, install the fittings and hang the door in its rightful place.

In this way, it is not possible to restore the entire surface of the door, but only small area, but it is important to choose tone-on-tone paint.

How to laminate an interior door with film

It is better not to use for pasting doors. cheap PVC film, but give preference to the durable “self-adhesive” D-C-FIX. This film is guaranteed to last more than 10 years, will not fade in the sun and will not wear out.

The film is sold in rolls with a width of 45, 90 and 67.5 cm. The length of the roll is 15 m. The average retail price of this German film is 1,700 rubles. From huge assortment It’s not difficult to choose an option with imitation wood, stone, abstract or other patterns that suit a specific interior.

The film should be glued carefully, with someone's help. It is advisable to cut according to patterns, and immediately remove small bubbles with a wide plastic spatula. If the bubble does not go away, you can puncture it with a thin needle. For better plasticity, the film can be heated with a hairdryer.

Note! can be restored using adhesive-based veneer. We press the material to the canvas and heat it with an iron. We cut off the excess. We leave the restored door leaf for a while, pressing the glued veneer with sandbags.

Prices for self-adhesive film

Self-adhesive film

Video - Pasting MDF with veneer

Video - How to glue D-C-FIX film

Video - The principle of gluing film

How to replace door hinges. Photo instructions

We apply a loop, use an awl to mark the pins for the drill, and use a blade to carefully cut through the veneer

Video - Installing hinges on an interior door

Very often, restoring wooden doors with your own hands is the only way out and allows you to keep the door in its original condition without significant investment.

Of course, it will be much easier to get rid of old wooden doors and buy new ones, but there are cases when this item fits harmoniously into the surrounding interior, and it is simply not possible to find a similar one.

It is the restoration of doors with your own hands that allows you to give a second life without much effort. old door.

In this case, the operating principle is the same for both the entrance and interior doors. The only difference may be the presence of a glass insert, which is recommended to be removed before starting work.

It should be noted that you can restore both a door made of veneer and solid wood, as well as an entrance door made of metal.

Preparatory stage of work

Almost any opening made of wood is covered with a special coating in the form of paint or varnish to protect the canvas.

On initial stage restoration work, the old coating will need to be completely removed, but before this it is recommended to carefully inspect the door and assess the scope of work.

You can remove the old coating either using a grinding machine or using a fan heater; in some cases, you can remove the old varnish or paint using a special remover with your own hands.

If a wash was chosen to remove the top layer, you must carefully read the attached instructions.

As a rule, it is applied to the canvas for some time, after which it is removed using a scraper.

If necessary, then for complete removal old top layer, the procedure will need to be repeated with your own hands.

Old application can also be quickly removed using a DIY fan heater. If you use this universal device, then there will be much less waste from work than when using a solvent.

Such a fan should be directed at the canvas until the coating begins to swell, then upper layer removed with a scraper or spatula.

Caution should be exercised as high heat may damage the product. If paint remains on the door leaf in some places, it can be removed from the array using sandpaper.

When using a sander, remember that it only removes the top layer on large cavities. In hard-to-reach places you will still have to work manually.

Canvas restoration

At the next stage of work on restoring the old door, it is necessary to restore the door leaf itself with your own hands. As a rule, the most weak point wooden door is hers Bottom part.

In addition, all chips and cracks can be effectively removed using a special do-it-yourself wood putty. In the case where the lower part cannot be repaired or restored, it can be replaced with a new one.

After restoration work is completed at this stage are completed, you can start sanding the door leaf with your own hands.

The work process of polishing a door leaf is conventionally divided into two stages. The first one produces rough cleaning array, in which all gross defects and flaws are removed from the old product.

It is best to process the entire surface by hand, and for ease of work, put sandpaper on a block, while hand movements should be directed along the fiber.

Remove all dust from the door leaf with your own hands using a damp sponge.

Painting stage of work

On final stage work on the restoration of the door is carried out by painting it. This can be done either manually or using a spray gun in automatic mode.

When choosing paint and varnish material You should pay attention to the subsequent operating conditions of the product, as well as the type of wood.

If painting will be carried out with a spray gun, the work must be carried out in a well-ventilated area.

In this case, the paint is applied evenly to the entire door leaf in a thin layer, but care should be taken to ensure that there are no smudges left on metal or wooden entrance doors.

The most commonly used method is the manual method of painting the door leaf. This type of painting requires a roller and a brush.

First, the entire door leaf is covered with a layer of primer, after which it must be allowed to dry thoroughly.

When painting the door, it is recommended to install it in a horizontal position, which will significantly reduce the risk of smudges.

At the first stage, paint hard to reach places and all protruding elements and only after that large surfaces are painted with a roller.

After the restoration of the door is completed, it must be thoroughly dried and hung in place.

Features of restoration of interior doors

At its core, restoration interior doors, made of veneer, has some significant differences.

This work of restoration of the canvas should be carried out with special care and as carefully as possible.

They paint a veneer door in exactly the same way as one made from solid wood. You can use both brushes and a roller, and a spray gun.

An effective way to restore an old interior door, which will make it even more attractive, is to cover it with new veneer.

This wood-structured material itself has adhesive base. In its texture it is completely similar to natural wood and will help to effectively restore even the most unsightly canvas.

Invalid Displayed Gallery

In appearance, a door restored using veneer will not differ in any way from one made from solid wood.

Can be applied interesting drawing, change the facade or make a stylish application from scrap materials. All this will only add originality to the door.

Features of restoration of metal entrance doors

Quite often, the front door loses its original appearance and becomes unattractive.

Today as front door They try to use iron, but in certain cases it can also be restored.

As a rule, restoration of metal entrance and interior doors requires certain skills and availability special tool, but you can do it yourself.

In most cases, for iron or metal door Either the seal needs to be replaced or facade finishing. In the first case, it will be necessary to remove the old seal and install a new one in its place.

If restoration of the facade of an iron door is required, then you need to decide on the choice of a new coating.

Doors are under constant stress and therefore quickly take on a shabby appearance. Scratches, abrasions, dents and cracks are common in door structures. Restoring them can be much more expedient than buying new ones. This is especially true for expensive solid wood doors, which, moreover, can be completely unique.

All kinds of abrasions, distortions, broken fittings and broken inserts should make you think about restoration.

Restoring doors with your own hands is a difficult, but quite feasible process. If we are talking about input iron doors, then working with them has certain nuances. Wooden and interior doors have more interesting options restoration.

Tools and materials for door restoration

Depending on the door, you will probably find the following helpful Construction Materials and tools:

• Antiseptic impregnation;
• Stain or varnish;
• Paint and varnish remover;
• Wood paint;
• Primer, putty;
• Electric drill;
• Set of spatulas;
• Chisel;
• Screwdrivers;
• Carpenter's knife;
• Roller;
• Flute brush, regular brushes;
• Sandpaper;
• Hammer and nails;
• Pliers;
• Glazing beads;
• Lock and hinges;
• Construction hairdryer.

Restoration of wooden and interior doors

Solid wood doors are worthy of all praise: they are reliable, environmentally friendly and simply magnificent. However, designs from solid wood are quite bulky and therefore difficult to restore, but the result is worth the effort: with strict adherence to all repair technologies, solid wood doors are capable of 100% restoring all their characteristics.

• Preparatory stage

You need to remove the old door and place the panel horizontally on a flat plane. Next, if necessary, remove the upholstery and glass inserts, and then start removing layers of paint. For this you need construction hair dryer– it heats up the paint until it swells and is easily removed with a regular spatula. If there are still untreated areas, you can sand them well with a hand sander. In custody preparatory work– we treat the material with a primer.

• Main stage

Upon completion of the preparatory work, minor defects may remain. To remove them you need putty. Depending on the condition of the old door, the leaf is processed partially or almost completely. After the putty has dried, it can be easily treated with sandpaper. required area. This delicate process must be carried out very delicately so that no sanding marks are left behind. Before painting, it is very important to thoroughly remove dust and dirt from interior doors. It is advisable to carry out painting in two stages: first covering the door with enamel, then the painting process itself.

• The final stage

The process of installing a door is not only about putting it on the hinges and leveling it. You can strengthen the structure with reinforcing bars or anchor bolts. Moreover, this part of the work must take place with the door closed! Having installed and secured the door, it needs to be processed polyurethane foam and leave for a day to dry.

How to restore lacquered doors

Restoring varnished doors is a little more difficult: first you need to remove the old varnish from the surface, carefully sand the door and sand it strictly in the direction of the grain. It is best to varnish with a flute brush or a foam swab. The door must be varnished in at least 4 layers, the second layer can be applied after 2-3 hours, but each of the remaining layers must be applied no less than after 24 hours. During this time, it is necessary to periodically ventilate the room well. The last layer is subject to mandatory polishing, which can be conveniently done using a piece of felt or felt material.

Restoration of veneer doors

First you need to measure the door and cut the veneer parts according to the measurements obtained, then you should apply glue and let it soak in for 10 minutes. If the surface of the door is not perfectly flat, it can be leveled using a plane, although sometimes a simple sanding sheet is sufficient. Chips and cracks are filled with putty.

To glue the veneer panels to the door surface, use an iron heated to 50 degrees.

After warming up, it is necessary to firmly fix the result by careful grinding. In addition, you can press down the structure with a weighty object to secure it. It is important to ensure that no voids form under the veneer layer.

Laminate is glued in a similar way, only it is fixed with liquid nails.

The advantages of such a restoration clearly include a wide range of veneer, long term service and a relatively reasonable price of the material. However, veneer is sensitive to changes in humidity, and this is its obvious disadvantage.

Restoration with MDF panels

Restore doors MDF panels not particularly difficult. First, the opening is plastered, then plasterboard edges are formed. Next, using self-tapping screws, MDF panels, plastic overlays and wood trims are attached.

This method of transforming a door leaf is very popular, due to its moisture resistance and aesthetics. of this material, as well as its resistance to deformation. With all this, MDF is susceptible to abrasion in areas of frequent exposure.

Restoration with insulation

If it is necessary to insulate doors, many materials can be used as filler. It is advisable to abandon foam rubber in favor of a more modern, reliable and unpretentious isolon.

Restoration using natural or artificial leather

This restoration enhances thermal insulation properties doors, increases the level of sound insulation and makes its appearance more attractive. The disadvantages are the laboriousness of the process, as well as the tendency of the material to mechanical damage.

Restoration with wooden slats

Covering a door with wooden slats is quite a delicate and painstaking job. The material should first be sanded and, upon completion of the work, varnished. The slats can be mounted horizontally, vertically or diagonally. Such doors will look very aesthetically pleasing, become more resistant to damage, will be able to perfectly retain heat and protect against noise. However, the complexity of the process does not allow restoring the door in this way without any preparation.

Restoration of entrance doors

There are several reasons to restore metal doors:

If the surface of the door leaf no longer suits the owners with its appearance, the door is restored using leatherette upholstery, wooden slats and other materials.

Often the door looks quite decent, but it needs to replace the seal and restore its heat and sound insulation properties. This repair option most likely does not cause high costs, but often assumes welding work. That is, in the case of repairing metal door hinges or installing additional overlays, it will be problematic to carry out repairs at home.

Another option - mechanical damage metal parts of the door: deflection or curvature. In this case, leveling and subsequent straightening are necessary. Restoring a door with such problems is also not easy. It is better to entrust such work to a professional.

1. How to repair?
2. Option 2: wallpapering
3. Method 4: Vinyl Stickers
4. Method 5: overhead facades
5. Method 6: Canvas Update
6. Decor accessories
7. Repair is easy

When repairing a solid wood door, it often requires restoration rather than replacement. This measure will allow you to save on updating the canvas and save quality product in its place. In addition, restoration of wooden doors helps to adapt them to different styles, which are periodically changed during the renovation of premises.

Restore or change?

When the question of replacing a door arises, few people think that it can be restored. In what cases is this really the best measure:

When repairing wooden doors is impractical and it is rational to choose reinstallation of the block:

• The old door leaf and frame, which have become unusable: have dried out, cracked, the integrity of the structure has been compromised;
• The door is made of cheap materials: fiberboard, MDF, etc.

The decision to update the entrance or interior door should not cause concerns about the work; it can be done independently. Next we present detailed instructions, how to update doors, we will consider methods of restoring canvases and door frames.

What tool is useful for the job?

To update or restore an old wooden door, you need to prepare the door leaf for work. To do this you will need the following tools:

They will be useful for the restoration process itself.:

• Spatulas for leveling depressions and irregularities on the surface of the canvas;
• Wood putty, close to the natural color of the base;
• Stain, varnish, paint depending on the chosen type of restoration;
• Brushes, sponges and rollers for uniform application coloring compositions on solid wood.

Preparing the canvas for updating

Before you begin repairing old wooden doors, you need to take a number of measures to prepare the door leaf and frame:

In cases where there are significant potholes on the door, you can place a piece of wood in them and rub it with a spatula. This method will save on materials - the cork will be securely fixed in a small amount of solution.

How to repair?

When the preparatory work is over and the plaster has dried, you can begin decorating the canvases. There are several ways to restore a wooden door:

1. Sanding with painting and varnishing;
2. Wallpapering;
3. Drawing from a stencil;
4. Vinyl stickers;
5. Overlay facades;
6. Canvas update.

All methods find application in modern restoration work. Each process requires an individual approach.

Option 1: sanding and painting

This perfect way restoration of veneered surfaces. Correctly selected composition coloring matter may not hide, but emphasize wood pattern on the door. After all the preparatory work, the canvas is evenly painted in desired color. For deep color saturation, place enamel in 2 – 3 rows. Veneering is difficult without special equipment, but updating the pattern and color is easier than ever. By painting you can also preserve the antique decor of the door.

Before coating with varnish, you should go over the surface with stain to prevent the development of fungi and mold.

Option 2: wallpapering

Repair door block wallpaper is another interesting idea that completely combines all the objects and designs in the interior. You can update this method at least every year during repairs and outside of this event: it is easy to do and the cost of coverage is quite small.

How to update wooden doors with wallpaper:

• It is necessary to apply one layer of primer to the prepared canvas and wait until it dries completely;
• The wallpaper is pre-cut to the size of the door. This must be done carefully so that the cut out outline then coincides with the door. Ideally, make a paper overlay with allowance for folding.
• Now apply glue to the wood and attach the paper sheet. If the wallpaper is non-woven, spread glue onto the roll and glue it to the base.. Smooth out well and remove excess glue. After drying, attach the fittings and hang the canvas.

Option 3: Stencil painting

Do-it-yourself restoration of wooden doors can be done using stencils. They are sold ready-made or made independently at large sheet paper or wallpaper.

To apply the finished drawing, follow the instructions:

1. The prepared base is coated with paint or varnish and allowed to dry;
2. A stencil is glued onto a dry surface;
3. Cover free place inside or outside;
4. Tear off the template and wait for the paint to dry.

Method 4: Vinyl Stickers

A modern option for interior decoration. Vinyl stickers are not afraid of moisture and water, the sun, they are easy to wash and clean if necessary. It is very simple to paste them over a door: apply the sticker and smooth it out. The advantage of modern interior stickers is their reusable and versatility. They are easily removed from the surface without leaving a mark; if desired, the location of the stickers can be changed. Suitable for decorating plastic balcony doors.

Method 5: overhead facades

Repair of interior wooden doors in the usual ways sometimes it may not give the expected effect and the process will require drastic measures. When you need not to restore, but to completely renew the facade of a door, overhead facades will come to the rescue. They are made from different materials, it is advisable to purchase an MDF overlay:

A door restored in this way radically changes its appearance.

1. Purchase a canvas of the appropriate size;
2. Place the overhead façade on the prepared base;
3. Attach it with self-tapping screws or PVA glue.

Method 6: Canvas Update

How to update an old interior door if you want to add or change the arrangement of glass in the leaves? To do this you will have to work:

Decor accessories

If the door is antique, it is probably equipped with fittings made in ancient times, which are a real crime to throw away. When handles and hinges wear out, it is better to restore them rather than throw them away.

To breathe life into the fittings, treat the products with sandpaper to prevent possible corrosion, and cover with a layer of primer-enamel. It will not hide the ornament applied to the handles, but will only emphasize it favorably. After drying, the handles and loops can be attached back to the canvas and hung in the opening.

Repair is easy

We told you how to make a new one out of an old door without replacing its main parts. These processes may seem difficult, but in fact even an inexperienced master can cope with them. The main thing is to start. You can change the appearance of any door:

• Input;
• Interior;
• Leading to the balcony.

You can come up with your own method of restoration: coating acrylic paints, painting, etc. The main thing is to organize it correctly preparatory stage to create a working foundation, and then it will go like clockwork. The main thing is not to be afraid and start.