Methodology of non-major ways to hide electrical wiring: methodology, analysis, recommendations. How to hide wires from a TV on the wall - simple solutions versus non-standard ideas How to get rid of wires in an apartment

Hide wires for decorating your own house or apartment - a necessity. In addition, this is also a safety issue, because often a child, dog or cat can get caught on the wire and pull it. In other words, if you take the time to hide the cables, you can take care of beauty and safety. There are many different ways to decoratively place wires so they don't get in the way.

Internal disguise

Internal camouflage is one of the most aesthetic methods, because the wires will not be visible at all. It is possible to hide the wires inside, for example, in the wall, floor or ceiling. This method is suitable for major renovations. It will be possible to hide all communications in a rather decorative way. And then the overall design and charm of the interior will not be spoiled.

Wall

How to hide wires in the wall? This is the question people ask most of the time. Usually there is a need to hide cables from a sconce, TV, home theater or router. The method described below will be effective for hiding the cable in cases where there is already a decorative coating on the wall.

1. Just follow a simple algorithm and everything will work out:
2. It is necessary to cut the wallpaper using a sharp knife. If it is liquid wallpaper, you need to carefully pick it out.
3. The paper material must be bent in different directions and secured with needles or pins so that it does not interfere with work.
4. Next, you should make a groove where the wire will be located. To do this, you can use any construction tool.
5. You need to lay the cable in the resulting recess.
6. The top of the wire must be covered with plaster or carefully sealed with plasticine. The appropriate tool is selected depending on the scale of the work.

The method is effective for hiding wires in the entrance. In this case, the procedure is simplified: you need to make a recess in the wall, lay the wires and cover it with plaster.

Floor

Placing cables under the floor is also in demand. This original method also allows you to very quickly disguise the wires. Here you can give preference to one of several options:

1. Using skirting boards. This is the easiest way. When purchasing skirting boards, it is enough to pay attention to their appearance; in particular, it is necessary that the product has a special niche at the back where the cable will need to be placed. This plinth is attached in the same way as an ordinary one.
2. Cement strainer. This procedure is performed quite often in a house or apartment during a major renovation. During this process, the wires are pulled through corrugations, laid on the subfloor and covered with cement screed on top. Finally, all that remains is to put on a decorative coating. This method is also suitable for camouflage in a wooden house. A wooden floor can be laid on top of the cement screed.
3. Disguise. This is a simple method that involves the use of a hammer drill. With its help, they make a recess in the floor, where communications are laid. Subsequently, this place is simply filled with cement. In this case, the cat or puppy will not be able to get hurt.

This method of hiding wires helps to hide wires in the hallway, kitchen, living room or computer room.

Floor covering of wires in the office is especially in demand.

Ceiling There is also an opportunity to disguise wires on the ceiling. This is in demand for hiding cables from a TV that hangs on the wall, from a hood, antenna, router or Internet. Moreover, this method is quite simple to implement.

1. You can give preference to one of the following methods:
2. Stretch ceiling. Here you need to think about masking the wires before the fabric is stretched. You can use any method, even just running cables. But it is preferable to take care of insulation in case the room suddenly gets flooded due to neighbors above.

Plasterboard ceiling. You can create a special niche from plasterboard around the perimeter of the ceiling. In this case, it will be possible to arrange any number of wires. However, it is preferable to attach all cables to one common trunk for convenience. Attention! You can take care of the aesthetics of the ceiling using decorative lighting.

Recommendations for external camouflage will help you take care of the aesthetics of the interior. There is no need to drill anything, plaster or cut the coating. However, such methods of camouflage look quite interesting and can enliven the situation and the interior as a whole.

The most popular decoration methods include:

1. Tree branch. Special sets are sold in stores. They contain leaf-shaped hooks that allow you to secure the wire to the wall, and birds for overall beauty. It is enough to attach the leaves in the direction from an interior item, for example, from a TV, or to an outlet.
2. Full trees. You can also braid a doorway in this way. In general, the use of such trees is suitable in cases where the wire is very long and you do not want to cut it. Special fasteners will help shape the woody silhouette.
3. Art object. With its help, you can create an original design for a light bulb, for example, on a computer desk. The design is fixed on the wall, allowing you to solve the problem with hanging wires.
4. Scenery. This is a rather complex implementation option that involves creating a spectacular panel. This decorative element on the wall looks very interesting. It can be placed above a table with a computer, around the TV.
5. Power station. This approach to business will help to implement several functions at once. In particular, it is necessary to create a power station on the wall surface. With its help, you can not only hide the cables beautifully, but also start teaching kids the principles of the functioning of a power plant.
6. Highway. The implementation of such a project on the wall is quite complex and painstaking. It involves quite a lot of time. All components are initially cut out of cardboard (you can print them or draw them yourself, or you can also buy a ready-made set). As a result, it will be possible to decoratively hide the wires.
7. Fence. All cables can be placed along the top of the plinth, masking them with decorative blanks in the form of a fence. They can be purchased at a specialty store or cut out of cardboard or drywall and attached to the wall using double-sided tape. The fence can be multi-colored or plain.

External camouflage methods do not end there. If there is no desire for dramatic changes, you can choose simpler methods. For example, you can arrange furniture so that it hides wires near the wall. Door trims are also suitable for dealing with unaesthetically located wires. Tall indoor plants do an excellent job of hiding wires. A carpet or carpet will help hide the wires on the floor.

Lifehack! In order not to do the work several times, it is better to immediately draw several options on a sheet of paper. This will allow you to visually assess what the result will be and give preference to the most suitable option.

What about the computer?

Today there is a computer in every home. It, especially when there is a system unit, has many wires: from the computer itself, monitor, speakers, keyboard, mouse, if there are no other technical means. As a result, there are constantly tangled wires. You will have to use your imagination and spend a lot of time to combat this problem. The most suitable ideas are:

• pass the wires through the box, having previously made holes in it;
• secure the wires in a sewn cover secured under the table so that the cables do not interfere with your feet;
• use double-sided tape, self-tapping screws, clips to place the wires, securing the cables under the table cover;
• make a cover, placing it behind the back cover of the table (if there is one), where all the wires are hidden;
• Tighten the wires into a hose, which will eliminate the wire chaos under the table;
• Use paper clips to secure connectors from devices near the table top.

It is important! If you have several mobile phones in your home that have different chargers, create a special charging corner. To do this, you can place an extension cord with sockets in the box and turn on all the chargers. Make holes in the box for the wires (curly ones are possible) and pull the cables through them. Their length should be such that you can easily connect your mobile phone and place it on the box. The unnecessary length of wire is rolled up and secured, for example, with a paper clip. The box needs to be closed.

How to hide wires in a car?

How to hide wires in a car? This question is asked by every owner of a DVR who is already tired of the wires hanging from the device. You can give preference to this algorithm:

1. Remove the plastic part of the stand. To do this, you need to disconnect the two clips by pulling them towards you and remove them from the clips by pulling them up.
2. Route the wire inside so that the end leads to the door.
3. Reinsert the panel.
4. Lay the wire between the previously removed element and the rubber band, which acts as a seal.
5. Open the glove compartment and run the wire through it from below.
6. Do the same at the other end of the glove compartment.
7. Place the wire under the mat.
8. Route the wire through the armrest.
9. Connect to the cigarette lighter.

The only problem is that you need a long wire. This method will allow you to cope with the problem of the always interfering cable from the car recorder.

It is worth following useful tips to hide wires beautifully, safely and conveniently. In particular, you can pay attention to the following recommendations:

1. Label the wires to help you remember which is which and to avoid confusion.
2. Do not bundle together wires for different purposes, in particular for transmitting data signals (this includes cables from antennas, TV, computers, the Internet and audio devices) and with alternating current networks. If you do this, the level of noise and interference will increase.
3. When the cable is long, there is a high possibility of damage, in particular electric shock. Such wires are especially unsafe for pets and small children, who may accidentally pull the cord during gameplay.
4. Buy a decorative box to hide the cables from a suitable store or make one yourself.
5. Make sure that the chosen method of hiding the cables does not lead to the loss of the aesthetics of the interior.

Now you know how to hide wires. Both internal and external methods are in demand. Give preference to the one that is most suitable for a particular situation. Do not forget that the external way to beautifully hide the wire should fit into the overall interior design. In this case, it will be possible to achieve aesthetic design and safe use of all electrical appliances in the house.

The extension cord with chargers constantly gets in the way on the table or under your feet, collects a lot of dust, and also looks unaesthetic. Dealing with this problem is very simple: take a nice box, make a few holes in it and hide all the wires and cables there.

There are also ready-made solutions, for example Plug Hub from Quirky. This is a box made of hard plastic with a rubberized bottom. There are three holes on top for cables, and inside there are three fasteners that can be used to wrap cords that are too long. The Plug Hub can be placed on the floor or mounted on the wall.

2. Secure the wires under the tabletop

To secure the wires and extension cord under the table, you will need binders and screws (their length should be at least a quarter less than the thickness of the table top, otherwise they will go right through and the table will be damaged). First of all, attach an extension cord under the tabletop, preferably in the middle of the table or closer to the wall. Then secure the binders in the required places using screws. Connect everything you need to the extension cord and collect the wires with clamps. Visually the table has become much cleaner and neater.

There is a simpler option if you don’t need to hide a large number of wires. To do this you will need a construction stapler. To prevent the long wire from the lamp from dangling under your feet, carefully secure it with paper clips at the table leg. A small extension can also be secured with paper clips. For thicker wires, it is better to use special clamps (for example, these).

Stapler clips aren't your thing? Regular zip ties will do. Secure the wire to the table leg with zip ties. Wires that run along the floor can be covered with plastic or a board that matches the color of the floor. The extension can be secured under the tabletop using wide Velcro: secure it to the back of the tabletop with screws, and then attach the extension. To prevent the wires from dangling under the table, run them through cable channels - they can be purchased at any hardware store. You can fix the channels themselves with electrical tape or a regular plaster.

3. Organize your cable storage

Organizing them correctly will help you get rid of tangled wires. First, collect cords from phones, players, game consoles, and tablets throughout the house. Then take boxes (preferably prettier ones), place cardboard dividers inside them, label the location for each cable (so you don’t get confused later) and lay everything out neatly. To prevent the wires themselves from getting tangled, use regular cable ties.

If you don't want to deal with boxes, buy a basket and save up more toilet paper rolls.

If the wires don't bother you, you can simply attach a label to each one to make it easier to distinguish between them. For example, like this:

4. Keep all necessary wires at hand

We can’t hide all the cables in a box: we need some of them almost constantly. The solution is simple: secure them to the edge of your desktop so that if necessary, you can reach out and connect the device to the desired wire. Sugru will help us with this - plasticine-rubber and one of the most irreplaceable things in the household. Don't believe me? Then take a look.

Roll Sugru into small balls and secure them to a table support. Then use a utility knife to remove some of the plasticine (be careful, try not to deform the balls too much). Life hack: to prevent the plasticine from sticking to the blade, first rinse it with soapy water. Then adjust the shape a little with a sushi stick or toothpick to create neat hollows (they should be slightly wider than your wires). Everything is ready, you can fix the cables.

There is an option for those who know how to work with wood. A small block with holes will help organize all the wires on your desktop.

The simplest solution is to pass the wires through binders attached to the tabletop.

5. Don't hide wires

Seriously, if you get creative with it, cables can be an interesting decorative element.

Even taking into account the fact that wireless technologies are increasingly taking their place in our daily lives, we are not yet able to completely abandon wires. Despite any Wi-Fi networks, television, telephone and Internet cables are still present in our apartments (not to mention ordinary electrical wires).

Even if all this is connected into one cable, there is no escape from the need to lay it. This means that the wires need to be disguised somehow. How? Read our article...

INSIDE OR OUT?

To begin with, there are two main ways to hide wiring: directly inside the wall or on its outside.

The first option involves a lot of dusty work: you will have to scratch the walls and spoil the existing decoration, postponing dreams of a beautiful interior for some time. But this option will radically solve the problem of interior aesthetics. It is recommended to use this method during a major renovation of an apartment or in a new building.

For those who are not interested in hiding the wires once and for all, we can offer one of the simplest and most budget-friendly options - cable channels. Let us outline their main advantages:

• the problem of unsightly, tangled or dangling wires is completely solved: the cables are hidden, and a decorative element in the form of a cable channel appears on the floor or wall;
• ease of installation: the cable channel box is fixed on the wall, the wires are laid inside, and the lid is closed on top. No inconvenience with wall chasers, dust, construction debris or damaged finishes;
• ease of use: the cover and the cable channel body are connected using a latch lock, which allows you to open and check the cables inside at any time, lay a new one or remove an unnecessary wire;
• thanks to the presence of various connecting elements, it is possible, if necessary, to increase the length of the cable route, run it to the wall, ceiling, or, conversely, lower it to the floor;
• low cost makes cable duct one of the most affordable ways to beautifully hide wiring.

Few non-specialists in this field know that a cable channel is not just a plastic box with an opening lid. Today in the markets you can find a variety of types of cable channels for various purposes.

Once you find out which boxes are used for what, it will be much easier for you to navigate when purchasing, and the interior will look much neater.

WHY IS IT STILL NECESSARY TO INSTALL CABLE CHANNELS?

Firstly, they make the interior of the room more neat and aesthetically attractive. Agree, confused between

wires are not the best decoration for your room.

Secondly, it is convenient: it will be much easier to figure out which wire powers a particular device.

And thirdly, it's safe. If you have small children or pets in your home, you must hide the wiring so that

protect them from electric shock. Even a small-sized cockatoo parrot can bite through a 0 10 mm wire with its beak!

TYPES OF CABLE CHANNELS

Today, cable channels are made of aluminum, steel, and plastic.

PLASTIC CABLE CHANNELS

Plastic cable channels are the most popular, as they have good characteristics. The cable channels themselves are usually made of PVC.

The main feature of high-quality material is that under mechanical influence the channel changes shape and also easily restores it without significant changes.

Accessories for cable channels are made of ABS plastic with additional additives that prevent the spread of combustion and the release of harmful vapors when heated (the composition is similar to the material of plastic parts of sockets and switches). This material is easy to recognize: its structure is uniform, there is no lamination, and the product is quite durable.

Plastic models have different colors. Models with a wood pattern are very popular.

METAL CABLE CHANNELS

Metal models (aluminum and steel) are characterized by excellent fire performance. High-quality galvanized steel has a special coating that prevents corrosion. Metal cable channels have a long service life and are much more durable than plastic models - they can even withstand hammer blows.

The price for such products starts from 2200 rubles. per linear meter.

BOARD CABLE CHANNELS

Often, a cable channel is not an interior decoration, but a need to hide the wires so that they are as invisible as possible. Skirting cable channels cope with this task perfectly.

These are a kind of plastic plinths, in the central part of which there is an internal cavity where the wires are laid. There are entire systems of plinth cable channels: not only long trays, but also a number of additional devices that allow you to assemble a structure of any configuration.

These can be external and internal corners, bends of various shapes, plugs, mounting boxes on which switches and sockets can be installed. There is also an option to install sockets directly at the baseboard level. This is convenient in the kitchen, when there are sockets for built-in large household appliances (refrigerator, dishwasher, electric stove) - so they do not interfere, they are even practically invisible.

The disadvantage of this system is that the plinth cable channel accommodates a small number of wires. Most often, a television cable is hidden in it. To bring out the connectors in the right places, there is special fittings that allow you to do this neatly and as discreetly as possible.

Common sizes of plinth cable channels: 15 x 100; 20 x 50; 20 x 70; 25 x 100 mm. Also on sale are cable channels of both large sizes (35 x 80; 35 x 105; 50 x 80; 50 x 105; 50 x 150; 65 x 150 mm) and mini-series (20 x 12.5, 32 x 12.5; 40x12.5; 32x16; 60x60; 75x20 mm).

The price of such a product depends on the manufacturer; the most budget models can be purchased at a price of 385 rubles. per linear meter, the price of accessories starts from 30 rubles. a piece.

FLOOR CABLE CHANNELS

It happens that you need to pull the wires to the center of the room along the floor.

You can, of course, throw in an extension cord. But in this case, there will again be wires that can easily be touched and snagged, and it is not advisable to transport a computer chair along the wire - you will have to lift it every time.

This is where floor cable channels come to the rescue. They are used for reliable laying of cables along the floor, as they can withstand heavy loads. Moreover, the relatively low height of the structure allows you to move freely around the room without fear of tripping, and even a computer chair on wheels can easily overcome this obstacle.

This type of cable ducts differs in both shape and installation method. They are mounted on the floor, so on one side they have a rounded shape, so they do not interfere with movement. Available in impact-resistant plastic or aluminum. There are also accessories for them - joints, corners and plugs. The most common sizes: 50 x 12; 75×17; 92×20; 160×65 mm.

The price of floor cable channels is not much different from baseboard ones - they are sold at a price of 370 rubles. per linear meter.

FOR WALLS PARAPET CABLE CHANNELS

Cable channels of this type are similar in structure to baseboard ones. The main difference is this. that they are mounted above floor level. Installation of parapet cable channels is carried out, as a rule, at the level of window sills or at the level of the workplace. It is possible to install switches and various sockets (for 220 V power supply, television, Internet, etc.) in the body of parapet cable channels. They also consist of various elements that allow you to assemble any configuration.

Parapet cable channels have various finishing options, allowing you to either make the channel invisible (then the elements are matched to the color of the wall decoration), or, conversely, highlight it and make it an accent in the interior.

The price for parapet cable channels is almost twice as high as for floor ones and averages 600 rubles. per linear meter.

PERFORATED CABLE CHANNELS

This is a type of electrical boxes, the distinctive feature of which is perforation (comb-shaped profile) on the sides. They are, as a rule, a U-shaped profile 2 m long and have a different cross-section. If necessary, they are equipped with a lid with continuous or partial perforation. As with other cable channel models, the cover snaps into place after the cables have been laid. This profile design is used to lighten the weight and installation of cable routes. Perforated cable ducts are often used when the appearance of this installation is not so important (for example, in closets, basements, utility rooms).

The prices for such cable channels are among the most budget-friendly - on average 200 rubles. per linear meter.

FLEXIBLE CABLE CHANNELS

In situations where a “flexible approach” is important - if the walls, floor or ceiling have relief or height differences - we need cable channels that can easily repeat this shape. In this case, flexible cable channels are used. There are open and closed cable channels. Open ones are easy to maintain and install. Closed completely prevent the entry of foreign objects. TYPES OF FLEXIBLE CABLE CHANNELS:

• flexible chains (or tracks)- multi-sectional structures that can bend along their entire length in one plane (up and down). Each element of the “chain” is connected to adjacent links by a hinged linkage and has a snap-on lid. There are small gaps between the links, which is why the cable channels are called semi-closed.

Most often they are used in production to connect machines. However, this does not mean that the owner of a private house cannot use such a cable channel. If he has his own home workshop or garage, this type will be very useful to him. Width of flexible chains - from 20 to 234 mm;

• tubular: flexible cable channel for connecting to the door. Such a cable channel consists of a flexible metal hose and two fasteners that are attached to the wall and door. Typically, such transitions are used to power electric locks. Please note that the tubular cable duct can be bent countless times, but only if there are flexible wires inside (made of thin wire)
• molded from soft plastic or rubber. Cable channels, molded from rubber or soft plastic, have fairly thick walls that can prevent moisture from getting inside. In a private home, cast cable ducts are successfully used for electrical wiring in a bathhouse (with the possible exception of a steam room).

Flexible cable channels will cost more - prices start from 1000 rubles. per linear meter.

MINI CABLE CHANNELS

By and large, mini-cable channels are standard U-shaped channels with a lid, but with a much smaller cross-section. Another difference from conventional cable channels is the absence of accessories (plugs, joints, corners, etc.). They are used where there is no need to hide a large number of wires: for example, when installing ceiling lighting in a country house. Mini cable channels can be of the following sizes: 10 x 10; 12 x 12; 16 x 14; 20x20; 25×25; 40x40 mm.

The price for mini cable channels varies from 60 to 150 rubles. per linear meter.

FOR CORNERS

Due to their design, corner cable channels can be installed at the junction of the room wall and ceiling and, less often, instead of a baseboard.

Angled cable channels are cut with a hacksaw at the desired angle. Do this carefully so that the corners meet evenly with each other, as they can also serve as a decorative element - molding. No one will ever guess that there are wires hidden underneath! However, such a cable channel also has a drawback - it does not have as much space as in a baseboard one.

The most common dimensions are 40 x 40 mm, so you can’t fit a lot of cables into it, and we’re not even talking about wiring. Also, baseboard cable channels have thinner walls and are more likely to be damaged when laid underneath. Here you need to be careful not to damage the wires that you will lay.

The price for such cable channels varies from 60 to 150 rubles. per linear meter.

IS IT WORTH HIDING WIRES IN THE WALL?

If the interior style and your funds allow, you can take an extremely contradictory route: do not hide the wiring, but, on the contrary, expose it. How?

RETROWIRING

First we will, of course, talk about retro wiring.

Some time ago, this is exactly how wiring was done: insulators were nailed to the wall, and twisted wires were attached to them. Then came the fashion for hidden wiring: everyone tried to hide the wires as much as possible, leaving only the frames of sockets and switches outside, but they also tried to make them as inconspicuous as possible. However, recently, designers have realized that everything new is well-forgotten old, so open wiring in retro style is again gaining popularity.

It fits perfectly into loft, English, and classic interior styles, and also looks great in wooden houses made of logs, where a plastic cable channel would look simply ridiculous.

If everything is clear with the first reason (aesthetic), then the second reason why cable channels are not installed in log houses is that a wooden house changes its size all the time. Even after the main shrinkage has passed, there are changes and they are seasonal in nature: in wet periods the wall becomes higher, in dry periods it settles. The difference in height can be up to 5 cm per floor! And since the cable channels do not change their size, the problem of their damage arises.

Retro wiring and all its components are not cheap: the twisted wire itself costs from 165 rubles. per linear meter, sockets - from 1200 per piece, switches - from 1500 per piece.

CREATIVE APPROACH TO WIRING

If you are a young and active person or just keep up with modern trends, you will like our ideas.

Organize whole pictures out of wires! To do this, you will need a sketch or photograph of the future painting, a construction pencil, a couple of packages of staples for attaching the cable and the wire itself, the length of which depends on the size and complexity of the future drawing. The linear picture itself is outlined with a pencil, as well as the places where the cable begins (for example, a socket) and its end (a lamp).

But if there is not enough wire for the picture, but you still want to decorate it, cut out the silhouettes of birds from thick black cardboard and “plant” them on the wires - it will be original. Or

choose a cable in a bright, contrasting color and use it to create abstract shapes on the wall. For the most creative, there is another option: organize an entire installation on the wall - a tree from floor to ceiling.

It is completely unrealistic to imagine our life without electricity. It is for this reason that the average modern apartment contains many more wires than in the old days. We are talking not only about electrical wiring elements and numerous cords from devices, but also about the “weak point” for telecommunications. And today we will talk about how to hide these elements effectively and elegantly.

• You can trip over the wires;
• Small children or animals may damage the wiring and may receive an electric shock;
• The sight of wires lying on the floor or hanging from the walls greatly detracts from the design of the room.

Hiding wiring and low-current wires

I would like to start with the wiring, that is, with the cables running from the distribution infrastructure in the entrance to the power points - sockets. In addition, this section is also relevant for low-current wires for telephone and Internet. As a rule, these wires are hidden in the floor, walls or ceiling, or are run through special cable runs. But first things first.

Walls

Traditionally, two types are used:

1. Grilling. Making recesses in an existing wall. As a rule, this is a shallow groove, which we create using a hammer drill, grinder or a special tool - a wall chaser. After this, the wires are simply laid into the grooves and sealed with putty;
2. Gasket under gypsum board. Often, when decorating a room, plasterboard sheets are used, which not only cover existing walls, but also create new partitions. In this case, installation is greatly simplified, since there is a distance under the plasterboard sheets due to the presence of the frame.

All these methods have common rules:

• Wires should be laid no closer than 15 centimeters from the ceiling;
• Diagonal laying is not allowed - you need to work only in horizontal or vertical directions;
• You must know exactly where the wires are laid so as not to touch them in the future. Map the wiring in the walls;
• To make it easier to control the supply of electricity, distribution boxes are installed along the route of the wires.

Important! The existing wallpaper will not prevent you from carrying out such installation. Just carefully peel them off at the place where the grooves were made, so that after completing the work you can return them to their original place.

Ceiling

In the case of ceilings, gating occurs in the same way as walls. Thus, we can bring the wire to the place where the chandelier is fixed. After this, all that remains is to level the area and carry out the general finishing of the ceiling. However, it is much more convenient to use suspended ceilings, plasterboard sheets and other finishing methods, including stretch options. In this case, there are niches into which wires can already be placed. In addition, we can provide electricity not only to the chandelier, but also to create many different lighting concepts, supplying power to all light sources. As for communication wiring, low-voltage wiring is usually not laid anywhere other than walls.

Floor

The most rare method. After all, disassembling the floor to replace the wire is much more difficult than in the case of a wall. In addition, heating systems are often installed in the floor, and there is simply no room for other communications. Finally, floors can flood or simply be exposed to moisture, which is not a good thing in the case of electricity.

But if you still decide to do this, then they usually use grooves in a ready-made cement floor, as is the case with walls. Also, wires in corrugated channels can be laid in a screed, pouring cement on top.

Overhead cable ducts and skirting boards

We decided to display this item separately, since the method, although hidden, still involves placement outside the wall. At the same time, not only wiring and low current are carried out in this way, but also cords with wires. So, in hardware stores you can easily purchase skirting boards with space for cables, which will greatly save time and effort compared to arranging everything inside the wall. But you need to understand that in this form the wiring and cords will be more vulnerable to mechanical stress and flooding.

Today, there are special cable channels that involve long plastic products with empty space in the center. They are often used in a vertical position in order to lay power or an Internet cable from the same baseboard to a consumer device - a TV or router.

How to attach a cable duct to a wall

Some people make a grave mistake by not securing this polymer element to the wall. But in fact it is very simple to do this. There are several ways:

• Liquid Nails. In fact, these are not nails, but special glue. This option is used if we attach the cable to a tile or other very smooth surface. At the same time, you need to understand that this glue, despite its strength, will not hold securely. So they use it more as an additional fastener, and it should be used as the main one only when there are no other options;
• Self-tapping screws. With their help, it is convenient to attach the cable channel to aluminum or wood. As for the length, you should not overdo it, since when located 40 centimeters from each other, the adhesion force to the wall will be sufficient. It is better to screw it in with a screwdriver, since this process is very labor-intensive manually;
• Dowels. This method is chosen if we place the cable channel on a wall made of concrete or brick. Here we should drill holes in the plastic bottom of the channel in advance, then attach it to the wall and mark the places there. Next, all that remains is to drill holes in the marked parts with a hammer drill and insert dowels there according to their design.

Important! Regardless of the method used above, when using it, the wall should be as smooth as possible, since unevenness will reduce the strength of the fastening. It is better to connect two cable channels using ready-made corners, but you can also cut them at an angle of 45 degrees.

Masking cords

In most cases, it is the cords that get in the way, from the wires of the surge protector to the computer to the numerous wires from the equipment. In this case, you can use many camouflage options. Here are some of them:

• Wires in a box. The easiest way, since everyone has boxes and it’s easy to work with them. At the same time, there are ready-made options, like Plug Hub, where the bottom is covered with rubber and the walls themselves are plastic. And an ordinary box often spoils the view with its presence;
• Gluing to the table. Relevant for computer wires, which often just hang off the table and get tangled underfoot. But you can just put them together and attach them with something sticky to the back of the table;
• Homemade or ready-made clamps. It doesn’t matter what or how they are made – the main function is to keep all the plugs at hand in the right place. Suitable for a variety of chargers that we actively use.

Remember that electrical cords are potentially dangerous, so do not use them longer than required. Twisting and weaving are not permitted as this increases the risk of fire as well as the chance of electric shock. If you have to use many wires in one place, it is better to label them to avoid confusion. Finally, separate the electrical power wires from the “low current”, usually responsible for the Internet and communications. Otherwise you will get a lot of interference.