DIY furniture facades. Making kitchen facades with your own hands How to make facades from chipboard

Making kitchen facades with your own hands is good way save on buying a kitchen set. Old furniture you can give it a different look if you replace the doors of cabinets and cabinets, install doors that open upward, and add to the set fashionable details and beautiful fittings. And even the furniture facades themselves can be made by hand from relatively cheap and affordable materials.

Similar articles:

Replacing kitchen facades is a great way to update your kitchen set

The furniture facade is the face of the kitchen and the main component of its style. Decorating a headset with homemade parts should be done only when there is a great desire to do the work efficiently and accurately, because incorrect assembly can ruin even the best materials.

For self-made solid facades or shaped bent doors will require skills in working with wood, MDF or chipboard, as well as the availability of special tools.

In more simple version self-updating Kitchen furniture furniture facades are limited to taking measurements and installing updated doors and drawer panels in their intended places. Finished parts You can buy and order in furniture stores. There is also a service for sawing and edging selected MDF or laminated chipboard panels. At home without special tool It is difficult to cut laminated boards accurately.

But even buying or ordering panels in a store will cost less than purchasing ready-made cabinet furniture. Therefore, updating the kitchen by replacing facades is a common design technique.

Manufacturing options from different materials

Most often, do-it-yourself kitchen facades are made from wood. This is an easy-to-process, accessible and cheap raw material for the manufacture of materials for furniture industry. Kitchen facades must be resistant to exposure detergents, temperature and humidity, and wood and laminated panels meet these conditions.

It is easy to make facades with your own hands from the following materials:

• solid wood;
• plywood;
• pressed (chipboard, chipboard, MDF).

To work with the listed types of furniture raw materials, it is not required complex technology, you can cut wood with a jigsaw or a hand saw.

Plywood facades resemble massive ones: upper layer Birch plywood has a distinct wood structure; some types of material have a moisture-resistant coating that gives smoothness and a slight shine. To make plywood facades, it is better to choose thick varieties (2-3 cm). This will allow you to install mortise hinges for furniture, and the doors will be strong. Cover the edges of the facades with a special tape, matched to the tone of the wood on the front side.

If there is no thick plywood, make beautiful facades possible using paneled door technology. In this case, a board about 2 cm thick is used for the frame, and the inserts are made of plywood.

With help additional decor(molding, painting, patination or staining) can be achieved good result, having made updated facades with our own hands for kitchen furniture.

From MDF

The simplest option for making a facade from MDF is to take the dimensions of doors and panels and order products in furniture store. Having chosen panels with a coating of the desired color, the measurement results must be given to the master. On professional equipment The material will be cut and the edges will be glued on. The customer will only have to pick up the facades prepared for installation and hang them with his own hands.

When cutting laminated MDF panels yourself, you will not be able to avoid chipping the coating along the cut line. Therefore, when cutting, you need to make an allowance of 2-3 mm around the entire perimeter of the facade. After sawing, process the edges sandpaper, cleaning the cuts.

For sticking edges with your own hands, it is better to use PVC tape the desired shade. The material can be easily secured to the edges of the facade using a hot iron, ironing the tape through thick paper. If it is possible to use a router at home, you will be able to perform edging with a tenon tape.

The choice of materials for the kitchen must be approached responsibly: plastic covering does not protect against water, and in conditions high humidity such facades quickly lose their shape. When using this type of panel, it is necessary to perform high-quality edgebanding, so it is better to entrust the work to a professional.

Chipboard facade

When choosing a cheap uncoated chipboard, you also need to buy a film for finishing the facade. Saw simple chipboard You can use a jigsaw and cover the finished facades with film.

Laminated chipboard has a wood-like coating valuable species or painted in different colors. It is better to cut such material in a workshop, providing the master with the dimensions of the panels and the location of the hinges. When cutting facades yourself, proceed as follows:

• draw a contour line on the front side of the chipboard;
• Use a sharp knife to cut through the laminated layer of material along a ruler;
• cut the chipboard using a jigsaw along the cut line.

Edging a façade made of chipboard is carried out in the same way as processing MDF.

Glossy

Glossy facades belong to the MDF group. To cover such models use:

• PVC film glued using vacuum equipment onto a panel with or without milling;
• acrylic plastic with PVC or aluminum edge;
• special technology of painting with enamel and varnish.

It is impossible to make such a coating at home. To make fashionable kitchen furniture glossy facade, need to purchase ready material. It is better to order cutting and gluing of the edges in a workshop, because when sanding with your own hands, the shiny layer will be damaged, and the facade will not look as elegant as in advertising photos.

When using glossy facades, careful attention to the products will be required. The slightest dirt or fingerprints are clearly visible on the shiny surface. The surface is easily damaged by minor mechanical impact, and the film coating is unstable and resistant to high temperatures.

Handles are not only a functional piece of furniture. They complement and decorate the facades. In styles with strict lines (minimalism, hi-tech), handles sometimes serve as an emphasizing element: large, shiny, but simple in outline fittings are used. Such handles resemble roof rails and are located both vertically and horizontally.

It is better not to weigh down the lightness of fashionable sets with glossy facades or made in the Art Nouveau style with additional fittings. For such kitchens, methods have been invented to open without the help of handles, when you press the door. But sometimes such cabinets are equipped special fittings, disguising the handle as an aluminum edge.

For villagers and luxury styles It is customary to choose antique handles, with a coating that imitates old bronze or made of non-ferrous metal. These are elaborate cast products that should be combined with the decor of the facade.

The handles must be installed after hanging the facades on the cabinets. To ensure that the entire line of handles is placed at the same height above the floor, you can stretch the cord along the entire front of the lower tier. Along this line you need to make marks for installing the handle on each door. The same applies when installing handles on drawers or wall cabinets.

How to correctly install handles on the facades in each individual case is written in the instructions for these products. Holes for their installation can be made different ways: through in the plane, closed at the ends or in some other way. When purchasing handles, it is better to purchase several pieces for repairs during use, since these products may be discontinued, and it will be difficult to find a replacement if necessary.

What do you do with old furniture?

The one who made a kitchen set to order, and did not buy ready-made ones in a store, focusing only on his appearance and the sizes of cabinets, knows perfectly well how difficult it is to make a choice in favor of one material or another for facades. Cabinet bodies are most often made of laminated chipboard, but kitchen furniture fronts are much more diverse - MDF, plastic, aluminum, solid wood natural wood, the same, laminated chipboard.

Usually, kitchen furniture is chosen at the stage of construction or renovation of the room intended for it, in order to correctly place sockets, connect water pipes and air ducts. But it is equally important to think about how the kitchen will look in the end.

Types of kitchen facades

Without focusing on the appearance and style of execution, we will talk about what materials are used for the manufacture of kitchen facades.

Solid wood

Kitchen furniture facades made of natural wood mean durability, environmental friendliness, the ability to create any style and, of course, prestige. Accordingly, the price of such facades is the highest.

They must be varnished - matte or glossy, since any other coatings (wax or oil) are not able to protect the facades from kitchen loads and frequent washing.

The most suitable types of wood for the manufacture of such facades are:

• Acacia,
• Ash.

Doors made of birch or coniferous species wood is cheaper, but has insufficient strength.

Being natural material, wood is sensitive to changes in humidity and temperature in the room, under the influence of which it can become deformed or dry out. Therefore, it is not recommended to wash them with water, nor to clean them using a steam generator. Can only be wiped with a damp cloth without using cleaning agents.

For reference. At the same time, repairing the facades of kitchen furniture is only possible if they are made of solid wood.
Facades made of all other materials can only be replaced.

MDF

MDF furniture facades for the kitchen are distinguished by the greatest variety. This is a durable, homogeneous material that perfectly preserves the geometry of products.

And the appearance and performance characteristics of such facades depend on the type of coating.

• Polyurethane enamel. Facades for kitchen furniture with such a coating are called painted. They are distinguished by the widest variety of colors and shades, and the surfaces can be given various effects: metallic, mother of pearl, pearl, cracolet.
  But this advantage of painted kitchen facades is also their disadvantage, since if it is necessary to replace one damaged facade, it will be very difficult to match the tone of the others. Very often in such cases everything has to be repainted.

• PVC film is the most popular coating option MDF facades. After milling, the products are laminated with film using hot vacuum pressing. Kitchen furniture facades in film can be plain or with a pattern that imitates the texture of wood, leather, metal or other materials.
  Their main drawback– fear high temperatures, under the influence of which the film may peel off or become deformed.

Advice. Do not place on the tabletop under upper cabinets a working steamer, multicooker or kettle, otherwise you will ruin the facades with your own hands.

• Veneer. Looks pretty impressive furniture facade for the kitchen, lined with veneer, especially with a milled plane.
  You should know that with this processing, the MDF exposed during the milling process is tinted with a stain matched to the color of the veneer.

Furniture facade made of veneer

• Acrylic plastic. Even in the photo you can see how great the furniture looks kitchen fronts with this coating. But it is very afraid of scratches.
  The disadvantages of such facades include heavy weight and the risk of their deformation, since acrylic can bend the MDF located underneath it.

Aluminum profile

These are facades made of aluminum profiles with various fillings:

• Ordinary glass;
• Glass with photo printing;
• Acrylic glass;
• Plastic;

The profile itself is painted by anodizing, as a result of which its surface becomes very scratch-resistant.

The most popular profile colors:

• Matte silver;
• Matte gold;
• Bronze;
• Chromium;
• Champagne.

For reference. For ease of use, kitchen facades are often equipped with lifting mechanisms, but the instructions do not allow their use on heavy facades.
A aluminum profile filled with acrylic glass It has very light weight even with impressive dimensions, so it is often used for upper modules.

laminated chipboard

Most cheap facade for kitchen furniture - this is a facade made of laminated chipboard. It can look both very budget-friendly and quite stylish due to the arrangement of textures, the use of handles that match the style, and dilution aluminum facades. Most suitable for kitchens in modern style<.

Attention!
It is impossible to make radius facades from laminated chipboard.

Plastic kitchen facades, which are very popular today, are also made from laminated chipboard by gluing sheets of plastic onto blanks. The variety of its textures, colors and decors is huge, you can choose for every taste. But we advise you to make sure the quality of the plastic before placing an order. Just try to scratch the sample, and if you succeed easily, look for another option.

Advice. If you are interested in how kitchen fronts are made, watch the video on this page.

Conclusion

Don’t forget that kitchen furniture facades should not only be beautiful and match the interior in color and style, but also practical. Their service life is influenced by the quality of the materials used and proper care.

The history of glossy facades is relatively young; only a few methods or types of manufacturing such facades are widely practiced - these are film facades, PVC film is applied by hot pressing in a vacuum environment. Painted facades - by gradually applying paint in several layers, and then in the same sequence of varnish coating and further polishing. Acrylic facades - by applying glossy acrylic plastic to MDF. Postforming - application of paper laminate (HPL) to a substrate in a press under high pressure and appropriate temperature.

All of the listed types are unsuitable for self-production at home; either high-tech equipment or a specially equipped room is required. I want to talk about a simpler way to make a facade with a high degree of gloss and a perfectly smooth surface with your own hands using simple hand tools.

We will use Kamellit acrylic plastic as a glossy coating. The plastic is 4 mm thick, so a perfectly clean room or an expensive press is not required. Due to the thickness of the plastic, inadvertently falling debris during the application of glue or uneven application of the adhesive composition itself will not affect the evenness and smoothness of the surface of the coating, which cannot be said when working with materials with a thickness of 1 mm or less, even a very small speck that gets in or a layer of glue applied even by the method spraying will manifest itself on the front part of the facade in the form of swelling or ripples, the irregularities are especially noticeable on dark colors. When working with our material, you don’t have to be afraid of this, the glue will be contact, I prefer to work with Solupren glue, in our case it can be applied with a roller, brush, or simply with a swab made of fabric, polyurethane foam (sponge) and there is no need to clean the work area to the point of surgical operating room.

To begin with, I would like to show several of our works in which facades were made using the proposed method.
It should be noted that this material is much superior in strength and also has greater dirt-repellent properties than the generally accepted, classical materials and coatings used in the manufacture of facades in modern furniture.
There are also similar acrylic plastics with a pearlescent effect, Grandsilk. The properties are more unique, for example, handprints are practically invisible even with careful examination. Materials Kamellit And Grandsilk easy to process, cutting is done using a circular saw, milling with conventional cutters. But if you try to bend it, you will have to sweat, the material is heat-resistant and to make a radius (curved) facade you need to heat the plastic to 160-180 degrees, with artificial stone it is much easier, it is more thermoplastic, although it should be noted that the processing technology for these materials is almost identical.
There are three methods for making facades and decorative panels, at least I describe which I use myself: this is preliminary preparation of the panels by gluing a solid sheet of plastic onto a sheet of MDF or chipboard, but it is not very convenient, the format of the plastic sheet is Kamellit 3050 × 2030 × 4, Grandsilk 2020 × 1320×4 i.e. vary from the sizes of MDF and chipboard sheets, laminated chipboard. Then the prepared panels are cut to the required size; this is convenient because the ends of the parts are already prepared for gluing the edge material; there is no need for additional operations associated with milling and fitting the ends. The second method is cutting plastic to the size of the part, gluing it to the part, processing the ends (removing overhangs) and gluing the edges. The third method is gluing the edge, gluing the plastic, milling (rounding the edge of the plastic).

I have shown a third method: first, we apply a 1-2mm PVC edge to the ends of the future facade, preferably glossy and matching the color of the acrylic plastic being glued. On the back side of the facade, we round off the edge chamfer using a 2-3mm milling cutter.
Shown is the back side of the facade with a processed edge.
On the front side, we mill the protruding edge (remove the overhang) under the face with the plane of the facade detail.
Next, we use a sanding machine to adjust it to an ideal, even plane, and at the same time we sand the lamination, which promotes better adhesion when gluing the plastic and the facade panel.
We clean it from dust, wash it with alcohol or a non-greasy solvent.
We move on to the stage of gluing the plastic. Apply contact glue to both surfaces to be glued, let dry and press tightly. The better you press, the better and stronger it will hold, the main and probably the most important requirement when working with contact adhesive. And another important point is that you need to accurately determine the drying time of the applied glue before gluing (joining the surfaces to be glued together). Personally, I have been working with this brand of glue for a long time, I determine readiness by the change in color of the drying layer, you can check by touching the back of your hand, there should be no sticking and the glue should not stick and remain on the hand. The manufacturer recommends a certain drying time, but at different room temperatures, the presence of air movement, sometimes blowing is used, or simply due to the shelf life of the glue (during long-term storage, the viscosity of the glue composition changes), the drying time of the adhesive layer varies greatly. In a word, the quality of gluing also depends on the correct pre-drying time of the glue.
Next we work with the plastic itself, first removing the overhangs using a copy cutter.
The cutter has a support bearing, the end of the part serves as a template. Milling occurs precisely along the contour of the facade.
Next, we round off the sharp edges of the plastic with an edge cutter; the shape of the cutting knives of the cutter can be different.
And at the final stage we polish the rounded areas and use sanding paste. If desired, it can be done without polishing.

As you can see, everything is quite simple, you just need a little patience, the process is quite time-consuming.

P.S. I have been using this technology for a long time, I see only positive aspects, the only downside is the expensive cost of acrylic plastic Kamellit.

Furniture made independently can cause real admiration. Now people understand that producing things necessary in everyday life on their own is not just a significant saving of material resources and a satisfying creative process, but also an opportunity to obtain furniture that is unique in its external characteristics and design solution.

If you have certain skills and tools, you can make anything yourself, even high-quality furniture facades. This element includes everything that is characterized as the front part of the furniture:

• ends belonging to pull-out cabinets;
• front panels;
• doors and so on.

According to modern experts, it is relatively not difficult to make furniture facades on your own, and the result can be achieved as positive as possible.

Important! To ensure a stylish and attractive appearance of an apartment or country house, to enhance its prestige, it is recommended to select the material that will be used in the process of manufacturing the furniture facade before work. It is first necessary to carefully study its disadvantages and positive aspects.

Materials for furniture facades

It's no secret that any furniture without a high-quality, attractive and carefully thought-out facade will lose its basic aesthetics and functionality. For this reason, close attention is paid to the production of these structural elements. Craftsmen are constantly coming up with newer materials, and a little later they use them for the wide production of furniture products.

At the moment, furniture facades can be made from materials such as:

• expensive wood species;
• plastic;
• high-quality tinted fluid;
• aluminum.

Each of the above materials has its own advantages and disadvantages. Wood can very quickly and easily lose its aesthetic appearance from direct exposure to the sun's rays, but is characterized by a long service life. Standard glass is characterized by its resistance to environmental conditions, but at the same time it is very fragile. Many materials require mandatory preparation and processing, which is very difficult to achieve in normal everyday conditions. For this reason, it is recommended to use wood in the manufacture of high-quality furniture facades. The material lends itself well to various finishing methods.

What tools may be required

To independently produce high-quality modern furniture facades, you will definitely need to prepare the following equipment and tools:

1. A board whose thickness is 18 mm, which will be needed to make the frames
2. Plywood, which is 6 mm thick, is required in order to produce an important element - the panel. In some cases, this material can be replaced with ordinary glass.
3. Standard line.
4. Roulette.
5. Special pencil.
6. Electrically powered jigsaw.
7. Wood glue.
8. High quality saw blades.
9. Brush for high-quality work with glue.
10. A rag dampened with water.

Features in calculating parameters

Before starting work related to the independent production of facades, it is recommended to perform the necessary calculations and measurements of the openings of the main cabinets, and based on them, calculate the dimensions of the facade elements. For this purpose, a certain algorithm of actions is used:

1. If the facades are designed for ordinary cabinet doors, their height must be kept at a value of approximately 3 mm less than that of the opening.
2. The width of the racks and all planned crossbars can be anything, the most important thing is that they are equal.
3. The width of the front parts of the doors is 3 mm smaller than the opening. If the master has planned two doors, this parameter will be calculated as follows: the total width is divided by 2, and then 1.5 mm is simply subtracted from the resulting number.
4. In the process of constructing crossbars located on facades, the length is calculated as the difference between the width of the door and twice the height of the racks. Then 20 mm is simply added to it.
5. The total width of the panel must be 20 mm larger than the width of the crossbar.
6. As for the height of an element such as a panel, it is determined as follows: the width of the future crossbars is multiplied by two, after which the result is subtracted from the height of the door and 20 mm is added.

Sawing elements and assembly process

After all preliminary calculations have been carried out, it is necessary to begin the process of cutting out the required elements that are intended for the facade. Initially, it is worth noting, on the basis of the board or plastic, the parameters of all future crossbars and racks located on them. Then, two column elements are cut out using an electric jigsaw.

To effectively secure the panel in these elements, specially sized grooves are cut out using pre-prepared disks. The disk needs to be adjusted so that the depth is 10 mm and the width is 6 mm.

After the measurements have been taken, it is necessary to cut out special tenons on the crossbars. This will allow you to fasten them to the base into one structure. Such tenons are made by using a conventional groove disk. All parts are thoroughly polished after cutting.

Only after this can you approach the assembly of the furniture facade. The process must be carried out according to the following scheme:

1. The racks are put on a pre-prepared panel and inserted into the cut.
2. Special crossbars are attached to the top and bottom, but care must be taken to ensure that the spikes on such crossbars fit exactly into the drilled holes.
3. Prepared elements must be promptly assembled. If one of the parts is not suitable for the groove, it is necessary to bring its parameters to the required ones by using special sandpaper.

Refinement and finishing of facade elements

To give all the details an aesthetic appearance, it is worth varnishing and painting. Such modification should be carried out until all the elements fit very tightly. After this, you need to coat the existing spikes and cuts with high-quality glue and completely assemble the facade structure. If glue comes out in places during the assembly process, it must be removed immediately. This is where a slightly damp cloth comes in handy.

The assembled structure should remain undisturbed for some time until the glue dries completely. Once the process is completed, all places where the parts are connected should be sanded very well. If necessary, the finished facade can be painted, covered with a special polymer film or varnished.

Features of manufacturing facades from solid wood

Furniture facades made from high-quality solid wood are currently very popular. The popularity of this material is based on its long service life, as well as its high environmental friendliness. The structural elements of the furniture have an attractive and timeless appearance.

Important! It is worth considering that an array of high-quality wood is a fairly expensive base, and therefore requires the most careful treatment during the work process.

Despite the fairly high requirements, the process of independently making facades from high-quality solid wood is relatively simple. You just need to make basic calculations according to the above scheme, mark all the necessary parameters and then cut the cuts and the elements themselves to the required size. Immediately after this, the structural part is carefully treated with special antiseptic compounds and varnish, which significantly increases strength and wear resistance.

Furniture made from natural high-quality materials looks ideal in interiors made in a classic design style. Furniture made from high-quality solid wood will look better in fairly large rooms.

If you wish and have certain skills and tools, you can easily make furniture facades yourself. This process will not take a lot of time and physical effort, and as a result you can get a unique and functional piece of furniture in all respects, which will meet all needs and desires. Similar elements of furniture facades will be useful in a country house. Here you can turn all your ideas into reality, without fear of spoiling the material. This is also an ideal opportunity to assemble a structure that will match the overall design of the room.

DIY furniture facades. Video

Everyday experience shows that making cabinet furniture with your own hands is a completely feasible task for a person who has the skills to handle tools and has a developed spatial imagination.

Even the most complex facades can be made yourself if desired.

Given that construction stores today offer a wide selection of different panels and components, making a kitchen yourself will not be a problem for such a person. Let's find out how manufacturing is done.

Self-production of kitchen furniture

Making a kitchen begins with creating a design for future furniture. This project must take into account several factors.

• Dimensions and configuration of the kitchen space.
• Placement of drainage system and water supply.
• Electrical diagram and placement of sockets in the kitchen.
• The material from which it is planned to construct kitchen furniture will depend on labor costs.
• The predominant colors in the kitchen, based on which the color scheme of the facades will be selected.
• The cost of all components should take into account the financial capabilities of the furniture manufacturer.

Do the math, the main thing is that the cost of a homemade facade is not too expensive, otherwise the meaning is lost

The price of future kitchen furniture is formed from several main items. From experience, fifty percent of the cost of a kitchen is the facades. The most expensive are facades made of solid wood. Making facades from cheaper materials will significantly reduce the percentage of the total cost.

A large share of the price is occupied by fittings. When choosing it, you need to maintain a balance between price and quality. Components that are too cheap will most likely not last long. With the choice of materials that we have today, you can always choose high-quality and relatively inexpensive fittings.

The countertop can be expensive. Therefore, you need to be careful about her choice. It should be quite durable and easy to use.

The cost of the structure also depends on the material of the panels. Making furniture with your own hands from chipboard will be cheaper than assembling furniture from MDF with your own hands.

To ensure furniture assembly goes smoothly, you need to prepare drawings of each table and cabinet. Determine the places where the side walls and shelves are attached, the order of installation and fastening of the facades and countertops.

In the back walls and in the countertop, if necessary, it is necessary to determine the placement of sockets. If sockets are already installed on the walls, then the rear, bottom and top panels should not interfere with the inclusion of devices in them.

Decide in advance where the outlets will be located.

The kitchen is assembled with your own hands in compliance with placement standards. Thus, the sink should not be placed in close proximity to the stove or heating devices.

The accepted standard dimensions of kitchen furniture parts should be taken into account. For example, the generally accepted width of the tabletop is 600 mm. The length of tables and cabinets along the facade can vary from 500 to 800 mm. It is necessary to adhere to these dimensions because the panels and facade blanks sold are manufactured to such standards.

The technology for making furniture from chipboard with your own hands involves working in several stages.

1. For the manufacture of wall panels, as well as shelves of tables and cabinets, laminated chipboard is used. If possible, you need to buy ready-made panels that correspond to the required dimensions. If this is not possible, purchase a large sheet of laminated chipboard measuring 1830x2440 mm. In terms of thickness, it is customary to use sheets of 16 mm.
2. The purchased material is checked by size, if necessary, outlined and sawed using a jigsaw. You can also order cutting in a store, but quality is not always guaranteed there.
3. The sides of sawn panels need to be sealed so that the chipboard does not fall apart. This is called edging. For this you can use a simple PVC film. The film is placed on the glue using an iron through a sheet of paper. For edging, you can use special plastic decorative overlays.
4. Assembling furniture from chipboard with your own hands is done using clamps, which secure panels of structures to maintain the shape and required angles.
5. After the cabinet or table is assembled, before installing the fronts, they are installed in place and the compatibility of the entire kitchen is checked.
6. The facade for kitchen furniture is installed last, after fixing the countertop.

When assembling the headset, remember, the facades come last.

Materials

You can make a kitchen facade with your own hands using materials of different quality and texture. This piece, made of solid wood, will last a long time. However, it has such a disadvantage as the high price of the product. In addition, making kitchen facades with your own hands from solid wood is a long process and requires sufficient skills in handling wood and carpentry tools.

Do-it-yourself furniture facades can be made faster and cheaper from other materials, such as MDF or laminated chipboard.

MDF

The material MDF is a wood-fiber board. Simply put, it is highly compressed wood. This type of board differs from solid wood in strength and durability, but in these same qualities it significantly outperforms particle board.

The advantages of MDF are:

• increased resistance to deformation due to the density of the slab, thanks to which the shape of the facade can be changed;
• the material is resistant to moisture, so it is very suitable for kitchen furniture;
• MDF boards can be painted and also lined with different materials, be it veneer or plastic.

Manufacturing from MDF is made easier by the fact that there is a large selection of blanks of various sizes, shapes and colors on sale.

Changed the design - repainted the facade

MDF facades are also convenient because during the operation of the kitchen they can be repainted due to the changed design.

Making furniture facades with your own hands can be simple if you use laminated chipboard blanks for this.

The facade for furniture made of particle board is the most economical option. This is the main advantage of laminated chipboard.

The main disadvantage of this material is that the edge of the slab is not resistant to moisture. Over time, such facades, under the influence of moist air and fumes, swell and become unusable.

However, with proper edging, they have a service life of at least five years. And if you regularly take care of the furniture, then such furniture can last ten years or more.

Chipboard boards for lamination are usually covered with kitchen paper or plastic. At the same time, plastic is the more preferable material for covering kitchen facades. It's easier to care for. This facade can be wiped with a damp cloth or even washed.

Considering that chipboard is made from pressed chips, care must be taken when installing fittings. If for fastening you have to unscrew and tighten the screw several times, then chips may scatter in this hole and the fastening may become loose.

A kitchen with a chipboard facade is the most economical option when the budget for furniture installation is not large enough.

Laminated board looks very presentable in the kitchen

MDF - postforming

Postforming is a technology for processing finishing material in the manufacture of such parts,

The technology lies in the fact that when heated, such plastic takes the shape of the product on which it is applied.

For MDF facades, this treatment is carried out by covering a slab with a complex pattern and rounded edges with plastic on both sides.

Most often, postforming is used when covering chipboard sheets with rounded edges with a radius of 8 or 10 mm. In this case, such slabs become more durable and resistant to moisture.

WATCH THE VIDEO

Tool

Making kitchen facades yourself involves serious preparation for this process. In addition to materials and accessories, you need to prepare the necessary tools.

For this work you may need: