DIY furniture made from car tires. How to make a comfortable chair from tires with your own hands Make furniture from tires

It's not good to throw away what you can reuse.

This is especially true for environmentally harmful materials such as tire rubber.

Used tires are a valuable material for craftsmen.

At home, in the country and in the yard you can build many interesting crafts from old tires.

Skillful hands of craftsmen transform them into proud swans, decorative wells, and comfortable benches.

How to make furniture from tires with your own hands - further in our article.

There are several options for creating tables from tires. Let's look at each of them in detail.

On two stacks of wheels

Washed, dried, degreased rubber wheels without discs are first painted with acrylic, bitumen, enamel paints.

The most suitable coloring mixture for treating tires is rubber paint. It can withstand hundreds of cycles of sudden temperature changes, as well as precipitation, without cracking or deforming.

The tires are stacked one on top of the other in the place where the table needs to stand. You need to install two stacks tires 4 pieces each, preferably in different colors, at a distance of about half a meter between the outer walls.

A rectangular sheet of strong material, which is at hand, is placed flat on top of two stacks of multi-colored tires:

• flat plywood;
• plastic;
• thick unbreakable;
• metal sheet.

To the top rail of each stack tabletop fixed with four screws diagonally in places of contact.

The edges of the sheet should protrude beyond the outer diameter of the tires by at least 10 centimeters.

The table cover can also be painted in any color pleasing to the eye.

To prevent the wheels from moving, there are two ways to fix them:

• inside each stack of tires pour earth or sand;
• every joint between tires coat with a layer of binder- hot, 1 cm thick, which will allow the tires to stick securely to each other after drying.

Depending on the design, such a table will be perfect for a country house, a playground, or a garage.

Magazine

This type of product is made from one tire, but larger sizes. Using the same principle, you can make stools and chairs.

Of course, it will not work as a full-fledged dining table, but it can serve perfectly as a coffee table.

Let's get started:

1. Tire of the right size wash and dry.
2. Find four legs from an old chair or make them yourself.
3. Screw legs to the tire with screws.
4. Above put a circle made of glass, plywood or plastic to cover the disk seat.
5. Decorate- completely wrap the tire on all sides with yarn or create a pattern on the tabletop.

Such a decorative table with legs will serve as an effective stand for a beautiful vase, magazines, or pocket items.

Wicker

The next method will require a little more effort and creative skills.

Procedure:

1. Cutting a truck tire along the tread into two equal halves. One half will serve as a countertop.
2. Cut the outer beads from five smaller diameter passenger tires to create five rubber rings.
3. Fasten with screws four rings from below on four sides vertically to the table top. Using the fifth ring, connect together the vertical rings on the floor surface. This will be the reference plane of the table.
4. Remains of rubber strips weave the seat hole tightly for a disk in a tabletop.

At such a table it is perfect to play board games in the evening at the dacha or read newspapers.

Making chairs

To make chairs from tires, you need to complete the following steps:

1. Prepare one whole tire - wash, dry, degrease.
2. From another clean, dry tire cut off one outer side.
3. Paint both blanks in any color you like.
4. saw off using a hacksaw, four round wooden blocks with a diameter of 6 cm. Two of them are 90 cm long, and the second two are 45 cm.
5. Close the disc hole in the whole tire with a plastic mesh, sewing it to the sidewall with a strong thread. This will be the seat of the chair.
6. Pull and sew the same mesh to the bead cut from the second tire. This will be the back of the chair.
7. Screw with long screws to the whole tire, two short blocks on one side - these will be two legs. Also screw two long logs on the opposite side - these will be the other two legs with a back.
8. Using screws, screw the cut round bead from the second tire with a stretched plastic mesh to the back between two tall blocks.

The country chair is ready, you can relax on it during breaks between work on the site.

Country chairs made from old tires

There are several options for creating a product. Let's focus on the most popular, spectacular and uncomplicated.

1. Cut off the sides at one of the tires. Cut the resulting ring on one side.
2. Cut off one third of the second tire along with the bead.
3. Paint two whole tires, one piece with the beads cut off to form a cut ring, and a second piece representing one third of the tire with the bead.
4. To make one chair from bald tires you need fold two whole tires on top of each other.
5. To fix the joints between them it is necessary coat with hot bitumen mastic. Glue or sew a plastic lattice onto the top tire with a strong thread.
6. To the top tire fasten with screws or bolt vertically one third of the tire with the bead at the bottom.
7. To the top of the vertical one third of the tire with bead also screw the middle parts with cut sides. Bend this part in the shape of the back and handrails of the chair.
8. Bottom ends secure with screws or bolts to the top lying tire.

It turned out to be a very comfortable chair made from tires for a summer house, a private farmstead, or a recreation center.

It is best to build several of these chairs for all family members.

Another chair option:

1. You will need one whole tire, and from the second tire you will need cut a sector one-third the size.
2. Wash both parts, dry them, and paint them with black rubber paint.
3. Find legs from an old chair or from a Soviet TV. Screw the legs with screws to the bottom of the whole tire.
4. Saw off two or three wooden blocks about 5x5 cm in size, 40 cm long. Sand and paint with black rubber paint.
5. Hole for disc in whole tire on top cover with a plywood circle, covered with leatherette. This will be the seat of the chair.
6. The inner cavity and ends of the second tire with the cut out sector are also covered with plywood and cover with leatherette. This will be the back of the chair.
7. Assemble the structure: fasten with screws two or three bars to the tread surface of the whole tire.
8. The backrest is also screwed higher to the bars.

The result is a cozy chair with a minimalist and laconic design.

It can be as in the photo or slightly modernized depending on the materials that are at hand.

Why not an impressive leather chair from a designer furniture showroom!

It’s not a shame to furnish not only a country courtyard like this, but also creative interior apartments or houses.

In Europe, such furniture in residential premises has long been not uncommon, because the environmental trend is gaining popularity every year.

Other furniture and crafts

At the dacha, every item, every useful thing is welcome. The spirit of fantasy and creativity is in the air here. Every seemingly unnecessary item will always have its own use. Worn automobile tires are a valuable material here, a strategic raw material.

It makes excellent front gardens for flowering plants and green spaces. Tires are used to make brightly colored houses.

Benches for sitting, rocking chairs, funny bugs and striped caterpillars, flowerpots - this list of uses for old tires can be listed endlessly.

Useful video

This video shows the process of creating furniture more clearly:

Conclusion

The main thing in the process of creating crafts is a flight of imagination and collective creativity. The whole family can be involved in making furniture; children will also be happy to participate. This is how country masterpieces are born from old worn-out tires.

There are different ways to arrange “your” suburban area. Of great interest are the ideas of creating original objects from old things that have served their intended purpose.

Craftsmen make furniture from wooden pallets, polypropylene pipes, plastic and wine bottles. New uses are also being found for old car tires. They make armchairs, tables, ottomans and even sofas. Practical and durable furniture is used in the garden, to furnish the garage, and as an unusual accent in the interior.

Tires can be used without coating, but more often they are painted in bright colors, wrapped in jute, sisal, linen, cotton or hemp rope, and tied with fabric.

The rubber of car tires contains toxic substances, so you should not use it in a child's room or in a poorly ventilated area. But even without this, there is enough space left for improvement: in the living room of a private house, on the terrace, in the garage and utility room, in the open air.

Low ottomans for the garden and home: soft, comfortable and practical

The simplest thing that can be made from used car tires is comfortable ottomans for relaxing and gathering with friends. They can be in the form of “tablets” covered with thick rope or with fabric upholstery on legs. Let's consider several manufacturing options.

First, the tire is wrapped diagonally with a thick cord crosswise to block the through hole. Then completely cover the circumference. To do this, the rope is twisted in a spiral starting from the center of the hole blocked by the cord. The rope is fastened with a glue gun.

In another option, 2 plywood disks of the appropriate diameter are used to close the holes in the center. They are attached with self-tapping screws. Next, the structure is wrapped with a thick rope, fixed with hot glue.

You can make a soft ottoman covered in fabric. To begin with, make blanks from a plywood sheet to cover the holes. Then a foam strip is glued to the side of the tire along the entire circumference.

Using a screwdriver, screw the plywood disk from below. Next, they cover the tire with thick material, fastening it with a construction stapler. Legs or wheels are screwed to the bottom plywood.

The remaining disk is wrapped in foam rubber and covered with fabric. The resulting lid is placed on top. It can be fixed with glue.

Several fabric-covered ottomans can be used to create a cozy seating area.

Tall poufs in the dining area of ​​a private house

The two tires are connected with bolts or screws from the inside. Next, the structure is painted or left as is.

A wooden circle made of MDF or chipboard is nailed on top, which is also painted, and soft bedding is laid. Also, a wooden circle can be covered with foam rubber and fabric.

An excellent set will be made from high poufs and a table. The table is made according to the same principle, only its height is twice as large. Casual painting with white paint while maintaining a contrasting black tread pattern gives the furniture a stylish look.

Ottoman boxes for storing small diameter tires

Wide tires of small diameter are suitable for making designer boxes for handicrafts and storing small items. Their production is similar to the creation of ottomans, only in addition to the outer lining, attention is also paid to the interior decoration.

Plain fabrics are used for interior decoration, and bright fabrics with patterns and colors are used for exterior cladding. Such cute interior items will be a good idea for a business.

Armchairs with wicker

Instead of simple poufs, you can make chairs with a back and armrests. The backrest rail is also attached with bolts or screws. Armrests can be made from strong, thick, varnished branches. When the structure is assembled, begin to close the holes in the center.

In addition to the methods already listed, you can use weaving. To do this, holes are made in a circle using a drill in increments of no more than 5 cm (more often possible). Subsequently, a strong rope or cord is threaded through the holes using an awl, intertwining each longitudinal row with a transverse one. You can experiment with the pattern, especially if you have weaving skills.

Curved steel tubes can be used as armrests. And for weaving, instead of rope, use soft wire.

You can make a bench from single chairs by connecting two sections with a common wooden frame.

A few more original ideas for making armchairs and sofas

You can make spectacular designer furniture from tires and scrap materials. Here's some evidence.

“Car”-chair made of 4 tires on a metal or wooden base. The techniques already described above are used in production. All elements are connected with bolts.

Low armchairs on legs with a soft back in the Art Nouveau style will fit perfectly into the interior of a spacious living room. To make one, one tire is cut in half along its diameter. This part will serve as the back.

A strip of thick foam rubber is glued inside. To ensure that the back is beautifully raised, two slats-racks are nailed in the center.

For the seat, a wooden disc is cut out and lined with foam rubber. Then cover all the foam with leatherette. Screw on the back and seats and the chair is ready!

The next option is done in a similar way. Only for the backrest a wide tire is used, which is attached tightly, without slats.

For a chair with a high back, the support will be thick wooden slats, which are covered with a piece of foam rubber and covered with fabric. As a result, the product does not even have a brutal base. Everything looks elegant and stylish.

For the garden, a chair with a wooden back is left without upholstery. Even without painting it looks very aesthetically pleasing.

As a backrest, you can use several tires connected to each other and placed on an edge. They can be attached to the tire that serves as the seat using cables or elastic springs. Further techniques for transforming waste material into a comfortable resting place can be suggested to you by your imagination or our illustrative example.

Another interesting option for a chair for a private home made from large tires. In this case, a segment is cut out of the tire, a soft seat is arranged at the bottom, and the inner walls are sheathed, and they serve as a backrest. A stylish combination of materials and a selection of fashionable prints will allow you to get an excellent youth chair for watching TV.

The sofa will require passenger car and van tires. Solid tires are used for the base, and cut sectors are used for the back and sides.

Eco-leather or coarse wear-resistant fabric can be used as lining. This sofa can be placed in the garage or on the spacious terrace of a private house.

Round coffee tables

Tires are also used to create an unusual coffee table. There are many ideas: on wheels, with or without legs, with a glass or wooden surface, painted or natural.

The option with a gold plated finish on chrome legs and a glass tabletop looks harmonious if it fits into the color background of the interior.

The option with a wooden tabletop and wenge-colored legs is perfect for a classic style. The legs are screwed to the lower wooden disk, and the tabletop is fixed with hot glue.

Custom solution for the bathroom

The tire can also be used as a base for a round sink. This way you can equip a bathroom in a private house or an open washbasin in a country house.

The selected ideas demonstrate the breadth of use of car tires in creating original furniture for home and garden. Having mastered the basic principles, you can develop your project and surprise with new ideas.

A DIY tire chair is an original design solution. The interior space of America and Europe is filled with products made from tires. They make tables, ottomans, chairs, and entire sets. Armchairs occupy a special place among crafts made from tires. They come with backs, armrests or without them. Can be stationary or mobile.

Making a backless ottoman

Before making a chair from tires, you need to imagine its functional purpose and determine the place of this item in the overall interior. The simplest type of seating furniture is an ottoman. Made from a car tire, it can become an integral part of the interior.

If you make several ottomans, they can be used as modular elements. Different combinations will change the overall environment. Due to this, the interior will always look fresh and attractive.

Required tools and materials

Before starting installation work on the construction of the ottoman, it is necessary to prepare:

• drill, drill bits;
• construction stapler;
• 2 circles with a diameter of 56 cm, made of oriented strand board (OSB, OSB);
• tire, burlap;
• rope (40 m);
• legs (4 pcs.);
• wooden blocks (4 pieces, 20–21 cm each);
• self-tapping screws

Step-by-step making of an ottoman

Making an ottoman from car tires is easy to do with your own hands.

1. The tire is cleaned of dirt, washed with soapy water, and dried.
2. The tire is decorated with burlap, which is fastened with a construction stapler around the perimeter of the tire.
3. To give the structure rigidity, 4 bars are placed inside the tire.
4. The bars are installed vertically. They serve as spacers on which the structure will be supported. The seat will be attached to these bars.
5. A hole with a diameter of 1 cm is drilled in the center of the circle of oriented strand board. This is necessary in order to place the rope there and secure it on the back side.
6. The circle along the edges is attached in 4 places with self-tapping screws to the support bars. This creates a rigid base for the chair structure. The frame keeps the tire from deforming.
7. The rope is threaded through the central hole. The end of the rope is tied in a knot on the inside of the tire.
8. On the opposite side of the tire, another circle of oriented strand board is attached to the ends of the bars.
9. Legs are mounted to the bottom of the frame.
10. The structure is installed on the legs, and a spiral-shaped rope is secured. The main thing is to hide the fastening clips under the rope.
11. The rope is wound in a spiral, and at certain intervals it is stapled to the surface of oriented strand board. The ottoman is ready.

Chair made of tires under a cover

Even greater comfort for relaxing or sitting is provided by a DIY tire chair. It can be made without much effort and time. A general scheme for creating a chair is proposed, which can be supplemented with various innovations or other original design solutions.

Required set of materials and tools

To turn old tires into attractive and original chairs you will need:

• screwdriver;
• furniture stapler;
• self-tapping screws;
• scissors;
• car tires (2 pcs.);
• felt;
• bendable plywood (100x90 cm);
• dense and thin furniture foam;
• knife (shoe or with a retractable blade);
• scissors;
• cover made of quilted fabric.

Step by Step Actions

1. First you need to fasten the tires together. This is done using a screwdriver and large self-tapping screws that are threaded through the inside of the tires.
2. Felt is attached to the bottom of the tire chair so that the rubber does not come into contact with the floor and the chair is easier to move.
3. The felt is fixed around the perimeter of the tire with a furniture stapler.
4. Excess felt is cut off with scissors below the fixation level.
5. The frame is turned over so that the felt base is at the bottom.
6. Next, construct the back of the chair. For this, bendable plywood made from special types of wood is used. Plywood is flexible and resilient. The fibers of such plywood are not located like a regular sheet, but in one direction. These structural features make it easy to shape the plywood sheet into the desired shape.
7. The plywood backrest is attached to the tires with self-tapping screws with an intermediate step of 10–15 cm.
8. To make the chair soft and comfortable, the frame is filled with thick soft furniture foam. The material is cut around the circumference so that it can be placed inside the tire.
9. The corresponding parts are cut out from thinner foam rubber for the back and soft part of the seat. For the seat, it is better to prepare 2 circles: one equal to the inner diameter of the tire (to fit inside), the other larger (the area of ​​which can only be 2-3 cm less than the outer diameter of the tire).
10. A thick foam circle is placed inside the tire. You'll have to put in some effort.
11. The top pads are made of thin foam rubber. A circle of smaller diameter is placed first, and a larger one is placed on top. To prevent the circles from slipping, the upper part must be secured with a stapler.
12. Thin foam rubber is placed on the back. Attached to the plywood sheet on both sides using a stapler. The excess is trimmed off.
13. The lower edge of the thin foam rubber is carefully tucked between the back and the seat.
14. A cover is sewn from quilted fabric and put on the chair (you can order its production in the workshop). The internal filler is padding polyester. Such a cover will give the chair even greater softness and make it cozy.

The idea of ​​using a cover is attractive because the material is easy to remove from the frame. It can be washed and refreshed. Over time, you can change the color of the cover to suit the updated interior.

Assorted variety of tire chairs

The technology for manufacturing chairs from tires, illustrated by the examples given, can be used as the basis for other variable solutions. By showing imagination, everyone will be able to present their own unique design project.

If you use several tires, you can make a chair with an elastic or massive back and armrests.

Having taken care of the solid base of the frame, the tire chair is placed on furniture wheels.

Tires can be combined with other available materials. Wooden elements (trunk parts of branches), nylon ropes or ropes will be used.

Anyone who is familiar with crocheting or has weaving skills may surprise you with even greater variety.

Structural transformations allow you to make a chair from tires with maximum comfort for relaxing in it.

Car wheels are used as a support-stand.

The space near the pool will be decorated with sun loungers in a set with a table.

Having shown ingenuity, they even make a rocking chair out of tires.

Car tires are not the most environmentally friendly material. When exposed to atmospheric factors, old tires emit toxic substances. This is especially dangerous in enclosed spaces with poor ventilation. Therefore, ideal places for tire chairs are outdoor terraces. There, furniture made from tires will not cause any harm.

A person’s desire to decorate the territory of his dacha, to create a wonderful, cozy environment there using things at hand, contributed to the emergence of many design ideas.

The original material for implementing extraordinary ideas is old car tires.

Entertaining crafts made from tires for the garden will decorate both flower beds and playgrounds, as well as paths. Tires and tires can be used not only to create elements of garden decor, but also for practical purposes - they can be used to build a swimming pool, furniture, swings, sandbox, and bicycle parking.

The photo below shows extraordinary ideas for crafts made from tires.

Idea No. 1. Making a flower bed from tires

The easiest way is to take an unnecessary tire, fill it with soil and plant plants. Of course, this will not be a unique decorative element of garden design.

To fix everything, take bright paints (acrylic or oil-based) and paint the tires. Next, we place them on top of each other, resulting in a multi-tiered flower bed.

An original solution would be a vertically located flower bed, folded in the shape of a pyramid. We fill the soil inside and plant climbing flowers - petunias or strawberries. On top you can place a pot with a single plant.

You can also make a hanging flowerbed from tires. To do this, you will need a steel chain - it will need to be attached to the tire and the entire structure will need to be suspended from a tree.

To prevent the soil from spilling, cover the bottom of the tire with a thick sheet of rubber or other suitable material.

An unusual solution would be to make flower beds in the form of a teapot and cups. All you need is a few tires and some scrap metal tape and pipes.

Idea No. 2. Tire figures

Another type of crafts made from tires for the garden are a variety of unusual and intricate figures made from tires. They will enliven your garden and improve the mood of everyone in the household.

The figure of a swan is very popular. To make it you will need a tire without metal cord. It must be pre-marked.

For cutting, use a well-sharpened knife. Secure the swan neck with a metal rod. The final step is to coat the resulting product with white or black paint (depending on what kind of swan you want - white or black).

It’s enough to simply create a funny horse, zebra or giraffe. Such figures will require a medium-sized wooden beam to be installed in the ground along with a tire.

Crafts should be painted in colors corresponding to a particular representative of the fauna.

It's easy to turn old tires and cans into a frog or a cute turtle. A little imagination will help you make interesting and unusual installations.

Note!

Idea No. 3. Country furniture

Furniture made from tires will look great in the garden.

They can be made in a variety of styles and using different upholstery materials, ranging from leather and textiles to wicker and wire.

The tires will make a comfortable chair in which it will be wonderful to relax in the lap of nature. To do this, we take tires and wrap them with intertwined straps and ribbons. It won't take much time, and the result will be entertaining.

You can make garden furniture from different-sized tires of medium and low hardness.

Tires make beautiful tables, ottomans, armchairs, chandeliers, fountains and washbasins.

Note!

Idea No. 4. Tire swing

Swings are an integral part of any playground. Tire swings are safer than those made of wood or metal. They are quite simple to make.

You will need:

• strong horizontal branch;
• sharp knife and jigsaw;
• chain or strong rope;
• tire.

We tie the end of the rope into a loop; the knots must be strong and reliable. We throw the loop over the branch, pass the rest of the rope through it and tighten it. We place the tires perpendicular to the ground.

We pass the rope through them and fasten it at a height of approximately 0.9 m from the earth's surface. The swing is ready!

Idea No. 5. Tire track

Paths created from waste tires, or rather from their tread part, look unusual and original.

We bring to your attention a selection of photos of various crafts made from tires.

Note!

Tires are a universal material for creating a wide variety of things with your own hands.

Numerous master classes on crafts made from tires can be easily found on the Internet. Therefore, if you have unnecessary old tires lying around, feel free to put them to work, creating memorable elements of garden decor.

Photos of crafts made from tires

Where to put old tires? This question worries many; in Russia, about a million car tires are thrown away every year. Summer residents actively use this resource to create crafts from tires for the garden, and they also actively decorate front gardens in city yards.

Crafts from car tires

The most common type of crafts made from tires are flower beds. To make a simple flower bed, just use a small piece of plywood, tires and paint.

We cut out a circle from plywood, its diameter should cover the bottom of the tire, screw it on using self-tapping screws and paint the resulting flowerbed in any color. When the paint has dried, we install the flowerbed in the right place and fill it with soil, planting flowers.

Large flower bed in the shape of a flower

Necessary materials:

• Three tires
• Gloves
• Wax pencil (you can use chalk)
• Sharp knife
• Electric jigsaw or grinder
• Galvanized nails
• Paint (one or more colors)

On each tire we draw petals for cutting; if you use a wax pencil, it will additionally lubricate the cut area. The ends can be made smooth or pointed; use a knife to cut out the contours of the petals.

We cut the resulting blanks into two parts with an electric jigsaw, after which we turn each part inside out. We connect the parts in pairs using galvanized nails, and then assemble the flower bed together.

You can also use four parts (two tires) for a flower bed. We paint the flowerbed in one or more colors and, after drying, place it on a flat area with the petals facing up. We fill it with soil and plant flowers.

Coffee table and tire ottoman

Materials:

• Plywood
• Tire
• Self-tapping screws
• Rope rope
• Wheels (for version with table)
• Thermo gun

It is necessary to cut two circles from plywood, with a diameter that covers the tire, and secure it to the wheel using self-tapping screws. We wrap the workpiece with rope so that the layers fit tightly to each other, securing it with a heat gun. For the top, we twist the rope in a spiral and secure it with a heat gun.

The ottoman is ready, for the coffee table we screw the wheels to the bottom. It looks beautiful and unusual, and is also suitable for apartment use; the only drawback can be the weight of the product.

All work must be done with gloves and with extreme caution to protect your hands from cuts. There are a lot of options for crafts for the garden from tires, you can use them to make small fences, large flower beds for flowers and seedlings, they can also be used to make garden furniture (tables and chairs), and various ottomans for the veranda.

Crafts from old tires for children

It is possible to make a playground with your own hands using tires. From them you can make two types of swings, sandboxes and decorations for the playground.

A large sandbox can be made by analogy with the previous master class with a large flower bed, if you add one or two more tires, you will get a sandbox for the entire yard.

Swing No. 1

Necessary materials:

• Tire
• Self-tapping screws
• Dye
• Old seat belts

We paint the tire and wait for the paint to dry completely. We close the hole inside the tire with seat belts and secure them with self-tapping screws. We tie the tire with chains on both sides (you can use strong ropes and cables). We fix the swing on a tree; if there is no suitable place, you can make a base for the swing from a timber.

Swing No. 2

Necessary materials:

• Tire
• Board and timber
• Bulgarian
• Self-tapping screws
• Dye

For the swing you will need a large wheel, cut it in half. We cut two beams to strengthen the base of the swing, the size of the tire width. We make seats for swings from the board; the board should protrude 40 cm on both sides. We paint all the blanks in the desired color.

After drying, insert the timber into the tire from the side of the cuts and secure it on both sides with self-tapping screws. Afterwards we level the board for the seat and screw it to the reinforcing bars with self-tapping screws. Swing handles can be made from old door handles, rope or rope. From the second part of the tire we make the second swing.

It is easy for creative people to come up with and make useful things from anything. Tires can easily be used to create furniture and much more. Various photos of crafts made from tires can be found on the Internet, with their help you can find inspiration and improve crafts, adapt them to yourself, or make the same ones.

Photos of DIY tire crafts