Cool DIY garage ideas. DIY garage accessories - homemade machines, tools. Shelves in the room - for storing loose fasteners and more

23.06.2020

Pork loin: product description, calorie content

Tender turkey meatballs in sour cream Delicious turkey meatballs

The article discusses the most convenient and practical do-it-yourself garage accessories that can improve the operating comfort of this room. Here are detailed recommendations for the development and creation of structures designed for convenient storage of tools and car parts, tips for making furniture, as well as arranging lighting and heating systems.

The garage is intended not only for storage, but also for servicing the car. For this reason, this room must be spacious, clean, comfortable and well-equipped.

To achieve all this, it is enough to take into account the basic requirements regarding the organization of space:

The presence of shelves for tires and tool storage significantly saves free space and allows you to optimize space.
The quality of lighting is of great importance, since not only productivity, but also the quality of minor repair work depends on it.
The construction of a garage workbench, machines, inspection pit and other devices expand the range of possibilities of the car owner in relation to vehicle repair and maintenance.

Helpful advice! All these elements should not occupy space exceeding 10-20% of the garage area.

Options for shelves in the garage with your own hands: photos and tips for arranging storage spaces

About 80% of the shelves in the garage are built with your own hands to store garage accessories, namely:

tools and additional devices;
components for the car;
accessories.

Often in photos of shelves in a garage with your own hands you can see them combined with a rack, which you can also make yourself. Most often, the rack is considered as the main place for storing tools. After its installation, the remaining space is filled with comfortable and spacious shelves.

Be sure to designate a place where work clothes will be stored. It is not necessary to occupy a large area; you can get by with one shelf or even a hook (depending on your needs).

A garage is a place where hazardous and flammable substances are stored. These include oil, gasoline, solvents, paints, and polishes. For them, it is necessary to provide a separate cabinet, hang a fire extinguisher and install a sand tank.

To protect against contamination during storage of wheels mounted on tire brackets, it is worth purchasing large bags or specialized covers to prevent dust from entering.

Brackets and shelves for wheels in the garage: design features

The most bulky spare parts of a vehicle include sets of tires, which can be winter or summer. When winter tires are used, summer tires are usually stored in the garage, and vice versa. Therefore, you should organize tire storage shelves or brackets.

The design of the bracket is as follows:

Two triangular frames made from corners. Between these frames, jumpers made of any durable metal are installed.
The triangular parts of the structure are fixed on the wall in a pre-selected location. The wheels should be installed perpendicular to the supporting element of the stand. In this case, the tires should fall slightly between the jumpers, thus being fixed on the shelf due to their own weight.

Helpful advice! It is recommended to place shelves for wheels in the garage with your own hands as close to the ceiling as possible at the optimal height. Thanks to this, car tires will not take up useful space in the garage.

For compact storage of wheels, a whole rack in the form of four wide shelves can be used. It is suitable for placing wheels with discs, which can be placed one above the other in a horizontal position. The structure can be made angular and raised onto the wall.

wooden beam;
boards;
chipboard sheets.

Installing tire racks is the most efficient way to store wheels. Greater savings in free space can be achieved by hanging rubber from the ceiling base along the garage wall. This option is possible if the room has a large height and reinforced concrete floors in the form of slabs on the ceiling. They will be used as a basis for screwing in dowels.

Tool storage: interesting ideas for a DIY garage

To organize a convenient area for placing things, you can make your own homemade and very spacious rack or shelves. Of course, you can find hundreds of ready-made models in stores, however, making a shelf in the garage with your own hands is much cheaper than purchasing a similar product on the market.

The same problem applies to shelving. By taking on the task of making your own tool storage space, you can not only organize a convenient and practical rack, but also fit it harmoniously into the garage space.

Helpful advice! The minimum load that the structure must withstand is 150 kg or more. In this case, the maximum load limit per section is 500 kg.

Rules for the manufacture of wood products:

It is better to use hardwood, for example, beech, oak, hornbeam.
Before assembly, it is necessary to treat the wood with antiseptic agents.
The frame parts must be carefully polished to ensure safe operation of the rack.
To make shelves, it is recommended to use chipboard or plywood sheets, OSB. DVL slabs with a thickness of at least 4 mm are also suitable.

The thickness of the material is determined by the loads that will subsequently act on the rack.

Recommendations for making tool shelves in the garage with your own hands

Shelves are installed in cases where the garage does not allow for a shelving unit. It is better if there are several designs.

Scheme for creating shelves for tools:

Plan the placement of shelves, determine their size and mark them.
Prepare material in the form of boards and fasteners.
Using a hammer drill, make holes in the wall and install dowels with hooks in them, which will provide enhanced fixation.
Attach hangers equipped with eyelets to the boards. For metal hangers, it is recommended to use self-tapping screws or regular nails.
Fix finished products using a building level, otherwise the tool may fall from the shelves, which makes operation unsafe.

Helpful advice! When making shelves, it is better to give preference to several short structures, since one long product can break under the weight of the tool.

At the final stage, you can apply decorative finishing to the products (paint or special film).

Technology for creating a tool rack in the garage

To create a rack with your own hands, you will need boards 9 and 19 cm wide. The size of the structure can be adjusted.

Step-by-step technology:

An element 9 cm wide is cut into several pieces 18 cm, 27.5 cm and 30 cm long. The resulting parts will be spacers.
The board, the width of which is 19 cm, should be cut into pieces 36 cm long. Shelves will be made from these parts.
On the board that will become the base of the product, it is necessary to apply markings in those places where there will be spacers. It is recommended to indent 2.5 cm on each side.
The top spacer is glued, then the top shelf, which already has a spacer, is nailed to it. The remaining parts are mounted in the same way. Installation of the lower strut is carried out at the end.
The structure should be turned over and the spacers should be screwed together with the base of the product.
The surface is thoroughly cleaned using sandpaper. After this, the product must be coated with two layers of oil-based varnish or another type of finishing.
The structure is fixed to the wall using anchor screws. Fixation should be done both under the top and bottom shelves.

Helpful advice! To strengthen the product, wood blocks should be installed between the sections. They will allow you to evenly distribute the load throughout the rack.

Organization of lighting and heating systems in the garage

To make the operation of the garage comfortable, the lighting, ventilation and heating systems in the room should be properly organized. Since cars are closely associated with the use of toxic and harmful substances, the problem of ventilation in confined spaces is particularly acute. For a garage, vents are suitable for brickwork. They are equipped with grilles.

Factors affecting lighting levels:

garage area, its height;
the number and nature of the placement of work areas (sizes of a workbench for a garage, inspection pit, number of machines);
type of decoration on the walls, its colors;
indicator of network power density per 1 m²;
type of garage lights.

To maintain the optimal temperature, various types of heating can be used:

gas;
based on waste oil;
air;
electric (infrared heater for the garage);
oven;
water;

There are many alternative ways to organize your own heating system.

Features of halogen, fluorescent and LED garage lights

The technical characteristics of halogen lamps are in many ways similar to incandescent lamps, but their bulb is filled with bromine vapor, so the products emit more light. The advantages of such lamps include a long service life - 4 thousand hours.

Helpful advice! Products must be placed in lampshades. It is also worth thinking about stabilization aimed at protecting against electrical surges. It is not recommended to touch such lamps with your hands (the shelf life will be reduced).

Fluorescent lamps are filled with inert gases inside. The inside of the flask is coated with a specialized composition that emits ultraviolet light under the influence of an arc-type discharge. Recommended models include IP-65 class products, protected from moisture and dust particles.

Installing LED garage lighting comes with the highest costs. However, they pay for themselves in 50 thousand working hours. In terms of efficiency, LEDs are 50% more profitable than fluorescent lamps. At the same time, they do not contain harmful components, and the light does not have an aggressive effect on the eyes, so there is no need to purchase additional lampshades.

Installing lighting in a garage: how to calculate

To calculate the power of conventional lamps, you can use the formula:

P = S x W/N.

Explanation of values:

P – total required power, W/m².
W – power of one lamp, W.
N – number of lamps (luminaires), pcs.
S – room area, m².

For halogen and LED lamps, the optimal indicator is 16-20 W/m². This value is suitable for rooms where the ceiling height is no more than 2.5 m. In garages with 3-meter ceilings, this figure should be multiplied by 1.5.

The calculation is influenced by the interior decoration of the walls of the room. In dark garages, the lighting should be brighter.

Light reflection level:

Room area, m²	Ceiling height, m	Wall color
Room area, m²	Ceiling height, m	Dark	Light
20	less than 3	0,6	0,75
50		0,75	0,9
100		0,85	1
20	3-5	0,4	0,55
50		0,6	0,75
100		0,75	0,9
50	5-7	0,4	0,55
100	5-7	0,6	0,75

To illuminate the inspection pit in the garage, it is recommended to use low-power lamps with halogen or LED lamps, since moisture accumulating in this place can cause an electric shock. The devices are mounted on the sides in pre-made recesses.

Helpful advice! To prevent an accidentally dropped tool from breaking the lamp, the design of the lamps can be made retractable. When the pit is not in use, the devices are securely hidden in the recesses.

Do-it-yourself autonomous lighting system in the garage

There are a number of principles on the basis of which an autonomous lighting system is implemented:

LED strips are mounted inside the lampshades (there are 300 diodes per element).
The switch is output strictly to the panel.
A suspended ceiling system is used for electrical wiring.
The wires are powered by a battery connected to the network via a charger.

A multi-level lighting system for a garage is considered the most optimal. It involves installing a large lamp in the middle of the room and installing small lamps in work areas.

Height calculation for a multi-level system:

Level	Height, m
1	ceiling base
2	1,8
3	0,75
4	0,4

The lamps are installed correctly if the machine does not cast a shadow on either side.

Which heater to choose for a garage

Heating of the garage is carried out using small portable devices that are able to warm up the room in a short time and subsequently maintain the optimal temperature.

Having thought about which heaters are best for a garage, many mistakenly believe that a homemade device can be made exclusively from expensive components and requires a significant investment of time. For this reason, garage owners refuse this idea.

In fact, to make a garage heater with your own hands, it is enough to limit yourself to budget materials, for example, thermal film. The scheme for creating such a device is very simple and involves the use of the following materials and tools:

a kit intended for assembling a heater;
wire equipped with a plug;
paper laminated plastic (area of one element 1 m²);
graphite powder;
epoxy adhesive composition.

Helpful advice! Be sure to have a multimeter with you. This tool is useless when assembling the device, but it will be needed to check for functionality.

Thermal, or - a common heating option in the garage

Recommendations for assembling a homemade garage heater

Step-by-step instructions on how to make a garage heater:

A mixture of glue and graphite powder is made. The more powder in the composition, the stronger the heating of the device will be. The average temperature ranges from 60-65°C.
Plastic sheets on the rough side are coated with a mixture of glue and graphite, which is applied in zigzag strokes, after which they are fastened with their faces and fixed with a frame made from wooden slats.
Terminals are attached to the graphite conductors and the structure is dried. Drying must be complete, otherwise moisture will damage the device.

After the heater has dried, the resistance should be checked. A garage heater is considered safe only after this check. Until this point, it is strictly forbidden to connect the device to the electrical network.

Safety restrictions:

It is not recommended to leave the device switched on unattended or near children.
It is prohibited to use equipment that can cause a fire.
Do not place flammable substances or materials near the device.

Making useful gadgets for your garage with your own hands

To carry out repair and service work, you will need to build an inspection hole in the garage with your own hands, the dimensions of which will correspond to the dimensions of the car, as well as a workbench for convenient work, plus equip the room with machines.

The basic set of tools and materials for creating a homemade garage workbench includes:

boards and wooden blocks;
fasteners and ties;
plane and other woodworking tools;
varnishing and carpentry adhesives;
sandpaper and drying oil.

An example of placing useful devices in the garage: 1 - with hand tools, 2 - shelving and cabinets, 3 - a table for various repair work, 4 - a shelf for storing tires, 5 - an inspection hole

Technology for making a workbench in the garage with your own hands: photos, drawings

The workbench consists of a table top and a base, as well as several clamping devices. The height of the workbench in the garage should be selected taking into account your own height. You can take as a guide the height of the kitchen table in the house, at which it is convenient to work. Be sure to make drawings to create.

Helpful advice! Ready-made drawings of a workbench for a garage, which can be found on the Internet, are suitable as a basis for making your own structure. If desired, you can customize it to suit your needs.

Garage arrangement: how to make a workbench indoors:

Work stage	Details, size in cm	Mounting type
Assembling the tabletop	20 boards (5x10x200) with grooves 2.5x2.5 in the 5th and 16th element (step 25)	Adhesive composition metal ties
Drying	-	-
Making legs (4 pcs.)	Block (10x10x80) with grooves for brackets on the front supports	Brackets
Assembling the base of the underframe	Frames (2 pcs.) made of boards (5x10)	Tenon connection to a depth of 2.5 cm and bolts
Fixing the side and rear support walls	Chipboard boards (thickness 10 mm)	Screws
Fixing the tabletop to the upper frame	-	Bolts

Final processing involves impregnating the finished product with drying oil and opening it with varnish.

Recommendations for creating a viewing hole in the garage with your own hands

There are no specific sizes for a garage inspection pit. The dimensions of the car are taken as the basis.

How to make a viewing hole in a garage with optimal parameters:

The width is selected so that there is enough space inside to work. The size is limited by the distance at which the car's wheels are seated. Each wheel needs a small area to maneuver. The average pit width is 0.8 m.
The length of the pit is limited by the length of the machine. 1 m should be added to this indicator.
The height of the garage owner is used to calculate the depth. Another 10-15 cm is added to it.

How to properly make a viewing hole in a garage using different materials:

Material	Wall thickness, cm
Ceramic brick	12-25
Concrete	15
	20

The pit is dug taking into account the optimal width of the pit, the material chosen for the walls, as well as the thickness of the waterproofing layer. Stages of creating a pit:

marking;
construction of a pit;
arrangement of the pit;
construction of walls;
lighting gasket.

For waterproofing walls, specialized hydrophobic impregnation is used.

Helpful advice! Using formwork, you can make reinforced recesses in the walls of the pit to accommodate tools and lighting fixtures.

Making a garage press with your own hands

To create a press, a frame measuring 178x80 cm should be made from 4 pieces of metal pipes. These elements are connected by welding. It is recommended to be guided in your work by drawings, selected or compiled in advance. After this you need to install:

retainer;
removable stop;
bottle jack (hydraulic).

You can use video materials to review the detailed technology for creating useful devices for the garage with your own hands. Such visual recommendations help you navigate the dimensions, master step-by-step instructions, and imagine what the finished structure should look like.

Manufacturing diagram: 1 - upper power platform, 2 - nuts, 3 - lower platform, 4 - studs with a diameter of 30 mm, 5 - lower thread of the studs, 6 - bottle-type hydraulic jack; 7 - base 20 mm thick

You can do it yourself. The list of useful devices does not end there. It can always be supplemented with any interesting ideas. The main thing is that the garage fully meets personal requirements in terms of comfort and convenience.

Who said that crafts are not interesting to men, it’s just that if women read about how we do it with great pleasure, then for car enthusiasts there is no more interesting topic than do-it-yourself crafts for the garage. In fact, there are a lot of devices with which you can improve your garage life, so there will be something to do throughout the long winter.

Useful homemade products for the garage with your own hands

There are original, interesting products that you can make yourself, and there are useful homemade products for the garage with your own hands. First of all, such things include furniture: cabinets, tables, hangers. All this allows you to optimize the surrounding space as much as possible, especially if your footage is not too large.

Most often, during the initial arrangement, all the necessary furniture is ordered. But if you rent a room or don’t want to take money out of the family budget for this, then you can easily arrange it on your own, especially if you know how to hold basic tools in your hands. To help yourself and for inspiration, you can use the video from homemade products for the garage with your own hands (YouTube can please you with a variety of ideas), and you can also take into account tips on arrangement, which will be the basis for a successful layout.

If you look at the photo that shows the optimal set of useful furniture elements, you will notice useful nuances for yourself. First, the location of any storage system must be located at a certain distance from the walls. It is believed that there should be at least half a meter between the machine standing indoors and the rack for normal, comfortable work inside. If the shape of your car storage is more like a rectangle rather than a square (this happens quite often), then it is worth moving all the storage for tools and useful things to one area along the far wall opposite the door. This is where you can place not only a table or shelving unit, but even a carpentry or lathe with maximum convenience. It would be worth mentioning that all storage of your tools should be located inside the garage only if it is securely closed or protected by tightly closed ones. Otherwise, it is better to place there only the most necessary things, preferably those that are not of particular value to robbers.

If you provide them in a separate room, which is located on the territory of your suburban area, then it is better to make them the so-called attic type, that is, located in the roof, and choose a place just above such a working area. In the summer and spring, this arrangement of windows will help you save on lighting; there will be enough sunlight for all types of work, and you will also be able to ventilate the room, because ventilation cannot always cope properly, especially if you are going to work inside, like in a workshop.

If you have a total shortage of money or out of love for art, you can make an original storage system using old empty cans. Any motorist accumulates quite a lot of them over the course of a year, and if you ask your fellow neighbors, there will be enough for each compartment of such an interesting cabinet. Of course, there is nothing complicated here and to perform such homemade garage DIY video-lessons are not needed at all. You need to take a plastic canister and wash it well so that no traces of its contents remain. Armed with metal scissors, a knife or other tool, we cut off the front cover of the canister, but so that the sides remain and the contents do not fall over the edge. To make the structure more stable, you can fix it on the back wall using self-tapping screws, but we will, of course, drive them not into the wall, but into a wooden strip, which we attach with dowels.

Do-it-yourself garage crafts photo

Continuing to explore options do-it-yourself garage crafts, photo which you have already seen and will see below, we must look at other ways of rational storage. If horizontal pull-out shelves simply do not fit inside, then you can make very original and functional vertical shelves. You will be surprised how many things they can accommodate, while the tools will be easily accessible and, as they say, “at hand.”

The same option as shown in the photo can be used in, where you also often need to set up a workshop, and even less space is allocated for it than is left in the garage. For such a design, you will need to build a frame from wooden boards, and make notches along its upper and lower edges where the cells will be inserted. Most likely, the inspiration for this design was the classic hives that are used for breeding bees; the system here is exactly the same. The sheets that are inserted inside have a perforated surface and the presence of these small holes will allow you to screw nails inside, hang hooks to hang tools and useful devices as conveniently as possible so that they do not fly off when pulling out and retracting.

Exactly the same perforation can be included in a furniture set. Having such a complete set of everything necessary for a home craftsman, you can build many useful homemade products for the garage with your own hands, video with whom you are online. In popularity, such resources may soon overtake popular hand-made projects, because men, no less than women, want to make the space around them, their kingdom, beautiful, functional, and comfortable.

Interesting DIY crafts for the garage

Let’s digress a little from the useful and talk about things that are not mandatory, but no less useful than traditional furniture, machines, lighting or heating. Let's remember that for many men, the garage is a real men's club, where you can equip everything to your liking. We offer you a couple of options interesting DIY crafts for the garage, which support the automotive theme and can be used for long gatherings.

We are used to either simply throwing away tires that are completely worn out, or repairing them. Having spent last winter's set on a swan or a flowerpot, this year you can easily allocate it to your loved one by making an entire furniture set. Frankly speaking, you will need not only car tires for this purpose, but also bicycle tires, because they can be used to construct the backrest, turning a stool into a chair.

Practice making such furniture and soon you will be able to replace your coffee table with one that not only looks beautiful, but can also become part of an original design concept.

A table and chairs are great; there will be somewhere to sit, but with the question of what to cook a delicious kebab on, our next idea will help. The fact is that an ordinary folding barbecue may not maintain the required temperature of the coals for a long time, and if you like to sit near the fire for a long time, you should make something larger. We will modernize it a little and present to your attention a grill made on the basis of a wheel rim. In order for the rim to maintain the set temperature well and not allow the coals to cool, it needs to be lined with bricks, but for maximum decorativeness of such a homemade product, it is better to file them a little using a grinder to fold them in a circle. The bottom must be covered with any available material that does not support combustion, for example, fine crushed stone.

Homemade products for the garage with your own hands drawings

Again, returning from entertainment to business, you need to understand that for many, a garage can be an alternative to a workshop in which you can serve not only your needs by creating crafts for your apartment, cottage, or even car repair, but also fulfilling small orders. In order to make high-quality useful homemade garage do-it-yourself drawings, diagrams and technical recommendations will definitely be useful to you.

If you plan to spend quite a lot of time in your makeshift workshop, then among those you are interested in DIY DIY for the garage - heating, lighting, ventilation, that is, the arrangement of a fully comfortable stay inside for a long time. Some people prefer to install infrared heaters, but from the point of view of the cost of electricity this will not be a very rational option. Water heating may be a good option, but it is best designed in garages that are located next to a residential building.

You can place solid fuel boilers of any design inside any type of garage, even make your own potbelly stove out of metal using a welding machine. But do not forget that with this type of heating, the interior decoration should be made of non-combustible materials, and the ventilation should be done efficiently, even at the stage when we need to promptly remove all combustion products from the room.

DIY homemade machines for the garage

Even if you are a non-professional carpenter or turner, you will still need the most convenient and compact machines. DIY homemade products for the garage can just become workbenches - tabletops on which various electric tools are attached, for example, a jigsaw, milling machine, lathe. A metal work surface will last you much longer than a wooden one, so you can easily combine wood and metal.

In today's story, we will introduce you to several tips and rational recommendations for arranging a garage parking space that will help cottage owners save square meters and things.

Let's look at 10 easy DIY ideas for...

You can easily and quickly install some wire containers on the wall to store various things. The rational arrangement of balls and hoses is another simple way to organize all the items and products that easily create chaos and dust if they are not sorted into compartments and containers.

2. Signs and inscriptions

This could be stickers or completely painting doors and cabinets. unusual furniture coating for special markings. They will help family members navigate the garage space, and also store items and products in a certain place. The main advantage of this decoration method is the speed of implementation, which will only take a few hours!

3. The magic of magnets

For small tools and drill bits, you can use magnetic strips on the available wall space. You can hang small parts and devices on them that will always be at hand. This is a simple way to practically organize a room and storage systems, and is also extremely easy to implement.

4. Original hooks

Take long unused keys and turn them into hooks for wall decor and as an original authentic accessory. On them you can hang work clothes, ropes and everything that should be within easy reach.

5. Cans and other containers

You can organize and separate your nuts and bolts by adding some plastic toolbar containers. This will make it much easier for you to find the part or element you need. All products will be sorted and placed in certain containers, and for additional convenience they can be attached to a wooden shelf.

6. Patch panel or board

Of course, you can always put in a perforated board where you can easily add some new hooks and organize your home decor in a new way. Plus, this organizational idea can act as a “makeover” for a garage wall! Tips and recommendations for using this multifunctional device can be found on the Internet portal Small Interiors.

7. Practical buckets

Some shelves and a large set of segments (stickers) can really come in handy. This is another quick way to create a functional and efficient storage area that will add character to your space. Interior Design and help keep your work tools in order.

8. Bungee balls

Using bungee cords to store equipment for a variety of sports is a great concept for transforming a space. You can place both soccer and basketball balls in these stylized nets! They are commercially available and extremely easy to install.

With this creative, sustainable layout idea, you have absolutely no excuses for kids not wearing helmets during school and after school on bike rides and rides. After all, now you need to manage not to find them in a specially equipped place! Add wall decoration small hooks on which these safety devices will be located.

Instead of throwing water bottles and cardboard boxes in the corner of the garage, build a quick and easy recycling station for the whole family. It can be built using plastic boxes and boxes with inscriptions, which allow you to sort waste into plastic and iron.

We have presented to your attention an interesting and extraordinary selection of conceptual ideas and creative solutions for organizing a garage space in an unusual house.

Did you like these rational and practical ideas? Share with us your opinion on this issue in the comments below...

Categories:
Places:

Usually a garage is a real man's second home. This is a place to store vehicles, a storage room, a workshop and a relaxation area. The garage is equipped with various workbenches, shelves, tables and cabinets to ensure a comfortable stay for both people and vehicles. In order not to buy expensive items, you can make the necessary homemade accessories for the garage that will simplify the use of the room.

We will look at recommendations and tips on how exactly you can make accessories for your garage with your own hands. What are these devices? What needs to be done in the garage? How to arrange it correctly so that everything is close at hand? The tips in this article will help with this. In addition, we will look at visual videos to simplify the task.

There is a large list of what a man would like to see in his garage. After all, it must be quite spacious in order to set up a workshop there, clean so that nothing interferes with work, and also comfortable and properly equipped. Nobody wants to look for a screwdriver among a pile of metal and other tools.

To ensure comfortable conditions in the garage, you need to take into account the basic requirements regarding the arrangement of the space inside:

The inside of the garage should have shelves for storing seasonal tires, as well as shelves for tools and other things. This will save space and organize it correctly.
It is necessary to provide high-quality lighting, since usually there are no windows in the garage, or only one. Lack of lighting makes the garage gloomy and uninviting. In addition, working in the twilight is not entirely good for your health, and you can make a mistake and damage something.
To expand the range of work inside the garage, you need to install a construction workbench, machine, inspection pit and other devices.

Comment! Experts have calculated that the list of these elements should not occupy more than 20% of the space inside.

Below is an example diagram of how you can make it and the accessories for it.

It deciphers like this:

Space for open brackets and hooks to hold your most useful and frequently used tools.
Space for shelving for small tools and accessories.
Shelves for car parts and tires.
Space for a rack with large tools and fixtures.
Cabinets for other things such as gardening tools, broom, mop, etc.
Workbench with shelves.

Now that we have found out an example of how you can organize space, let's look at how to make homemade machines and devices for the garage.

DIY garage shelves

Almost 80% of the shelves in the garage are needed to store various devices and accessories, such as:

tools and accessories for the garage;
components for the vehicle;
accessories.

Very often, do-it-yourself shelves are combined with a rack. It is also made by hand. It is the rack that is considered as the main place for storing things. And when the rack is installed, all that remains is to fill it with spacious and convenient shelves for garage accessories.

It is necessary to allocate space in the garage for storing work clothes. It is better to place it near the door so that you can immediately undress when you arrive in the garage, and then change again when leaving it. You don't need to create a whole closet or a large hanger. Sometimes one shelf with a hook is enough. However, it all depends on the needs.

It is worth considering that a garage is a room with dangerous flammable materials: gasoline, oil, paint, solvent, polish, etc. Therefore, you need to make a separate cabinet where all these materials will be stored. Place a fire extinguisher and a barrel of sand near it, which will be enough to put out the fire.

Advice! To protect the wheels from dust and dirt (since they will be on the brackets), you can use large bags or buy special tire covers.

From this video you can clearly see exactly how to make shelves for storing tools and other accessories for the garage.

Brackets and shelves for tires

The spare tire kit is bulky and takes up a lot of space. It is usually stored in the garage. And so that it does not take up much useful space, they can be hung. An area at a height is not needed, so brackets for storing tires are fixed at a height.

The design of the garage fixture is as follows:

two frames made in the shape of a triangle from corners. Jumpers are installed between them. Durable metal is suitable for this purpose;
triangular frames are made at an angle of 90° and mounted on the selected area. The wheels are installed perpendicular to the supporting structural element. The tires themselves should be slightly recessed between the jumpers. This way they will hang more securely, fixed under their own weight. The photo shows how to implement this.

Advice! Place the wheel rack higher towards the ceiling. This will allow you to store them conveniently; they will not take up useful space.

To compactly store wheels in the garage, some people use a rack with four wide shelves. It is used for wheels along with rims. It is convenient to place them horizontally one above the other. The rack can be made corner and installed higher to the ceiling.

To create the device you will need:

wooden bars;
wooden boards;
several sheets of chipboard.

You will learn how to make such home-made devices for the garage with your own hands from the video.

Tool Storage Ideas

To store tools, spare parts and other garage accessories, you can create an area to display them. It is enough to make a spacious rack and shelves with your own hands. There are many different options for accessories in the store, but they will cost more. And something made with your own hands is much more valuable. In addition, the dimensions of the garage fixtures will be created according to its parameters.

Important! The minimum withstand load for shelves and racks is 150 kg or more. But one section should have a maximum weight limit of 500 kg.

There are several rules if the garage fixture is made of wood:

Suitable hardwoods such as beech, oak or hornbeam. Pine is usually used because it is cheaper and easier to process. However, hard rocks are more reliable.
Before assembling the devices, it is necessary to treat the wood with special protective impregnations and antiseptics. This will extend their service life
The parts that make up the frame need to be sanded or sanded. This will make operation safer.
It is better to create shelves from sheets of chipboard, plywood or OSB. As an option, use DVL slabs, the thickness of which is at least 4 mm.

You need to choose the thickness of the tree based on the loads placed on it. There are some guidelines for making garage shelves. First you need to create a plan for placing shelves, decide on the size and make markings. Next, the material (boards, fasteners) and tools are prepared. Using a hammer drill, holes are drilled in the wall and dowels with hooks are inserted into them. This will strengthen the fixation of the devices. Suspensions are attached to the boards, after which the finished devices are fixed. It is important to use a building level to make everything level.

Important! When making shelves, it is better to create several short structures than to make one large one. The fact is that a large one may not withstand the weight of the tool and will break in the center under the weight.

All that remains is to paint the product or cover it with a special adhesive decorative film.

Now let's look at the technology of creation. We will need a board 10 and 20 cm wide. But, everyone chooses the dimensions of the structure themselves. Instructions:

A board 10 cm wide needs to be cut into several parts, the lengths of which are 18, 27.5 and 30 cm. These parts serve as spacers.
A 20 cm board is cut into pieces of 36 cm. They will be used to form shelves in the rack.
The board that serves as the basis for the structure needs marking. It is necessary to mark the places with spacers. An indent of 2.5 cm is made on each side.
The upper spacer is glued, the upper shelf with the spacer is fixed to it. The following parts are formed using the same principle. The lower spacer is mounted at the very end.
The device is turned over, and the spacers are tightened with screws along with the base of the structure.
All that remains is to sand the product with sandpaper and cover it with 2 layers of varnish or other material.
The device is fixed to the wall with anchor screws both under the top and bottom shelves.

If you need to strengthen the rack, wooden blocks are installed between the sections. Thanks to them, the load is evenly distributed throughout the structure.

Note! Comfort in the garage is also ensured by high-quality lighting, ventilation and heating.

Light bulbs or lamps are used for lighting, and for ventilation it is enough to make vents in the brickwork. They are covered with bars. Heating can be done by stove, gas, air or water.

Creating a Workbench for a Garage

The design of the workbench includes a tabletop and a base, and several clamp-type elements. You need to choose the right height of the workbench. It depends on the height of the person who will work in the garage. You can use the height of your own kitchen table as a guide. To create a workbench, it is better to use drawings, as in this photo.

Such drawings are just an example; they can be adjusted to your own dimensions. Now you can get started:

The tabletop is being assembled. To do this, you need 20 boards, measuring 5x10x200 cm, with grooves of 2.5x2.5 cm in the fifth and sixteenth elements. Fastening with adhesive and metal ties. You need to wait until the wood dries.
Next the legs are made. To do this, you will need a 10x10x80 cm beam with grooves for brackets on the supports in front. They are fixed using brackets.
The base of the table stand is being assembled. Two frames are made from 5x10 cm boards. Type of fastening: tenon in groove, 2.5 cm deep, and bolts.
The side and rear supporting walls made of chipboard slabs, 10 mm thick, are fixed. Screws are used here.
All that remains is to fix the upper tabletop to the upper frame using bolts.

In order for the device to last a long time and not rot, the wooden elements must be treated with drying oil and varnished.

Now that the table is ready, you can make a garage press. You can buy it, but if you want, you can do it yourself. To do this, you will need 4 pieces of metal pipes from which the frame is made. Its dimensions are 178x80 cm. The parts are connected by welding. Next install:

Latch.
Removable stop.
Hydraulic or bottle jack.

The above is a diagram showing the upper force platform (1), nuts (2), lower platform (3), studs with a diameter of 30 mm (4), lower threads of the studs (5), hydraulic jack (6), base, whose thickness is 20 mm (7).

Below is a video on how to make a metal workbench for your garage.

Conclusion

Making homemade garage gadgets with your own hands is not difficult if you have instructions and the right tools. But they can greatly simplify work in the garage. There are also other devices that will be useful; everyone decides for themselves what else they need in the garage.

With proper arrangement of space, a garage can serve not only for parking a car, but also as a workshop for its maintenance. In addition, a properly planned space will easily accommodate the required tools and provide storage of technical fluids and wheels during the off-season. The functionality of the room will allow you to expand the accessories for the garage with your own hands, which can be made from scrap materials or purchased in specialized stores with subsequent modification to suit your needs.

How to properly organize the interior space of your garage

Considering the fact that the number of things in the garage will increase over time, it is worth rationally using the walls, floor, and basement (if any) by equipping them with the maximum number of shelves, hooks, and racks. For skilled people, a workplace is determined and equipped in accordance with their needs.

Storage of large items

All items occupying garage space are conventionally divided according to several characteristics: large and small, required constantly or used once or twice a year. Depending on this, before starting to arrange the space, they work out a list of large things that are not often used, which include:

winter, summer wheels;
bicycles;
skis.

Shelf option for storing a bicycle in the garage

The list may be longer; perhaps the garage owner likes to do mechanics, then in his arsenal there will definitely be long pipes (plastic and metal) of different sections, bars and boards. For compact, organized storage of large items, homemade or purchased garage devices are used, for example:

Purchase wall-mounted bicycle holders that allow you to store them in a vertical position, which provides significant space savings;
For sets of tires, special shelves are installed on which each wheel lies separately. They are placed in any convenient place, for example, under the ceiling, along a wall, or in a corner space, or hung from the ceiling or wall on an appropriate support, having previously been cleaned of dirt and packed in special cases. This method of storing tires is only suitable for sets on rims. Considering cases where tires are stored without rims, a metal rack is welded on which the tires stand vertically in one row. Place the device under the ceiling or on the floor, securing it securely;
Using homemade mounts, they provide a compact arrangement of skis, ski poles and other sports equipment.

Attention! It is necessary to provide in advance a place in the upper third of the wall for storing a removable trunk.

In addition, craftsmen make various suspended ceiling structures located parallel to the floor to accommodate long objects, such as pieces of pipes or beams.

Devices for small things

For many craftsmen, the number of different-sized screws, nuts, bolts, and washers is measured in a bunch of boxes and buckets, in which it is extremely difficult to find the right part. To solve the problem, garage gadgets have been invented that allow you to organize small things and ensure that you can quickly find the right part, for example:

special portable boxes with compartments. A convenient option that allows you not only to store, but also to transport the required parts if necessary. It should be noted that the cost of the boxes is relatively high, so the ideas proposed below will help reduce costs;
craftsmen sort small nuts and other parts into jars with screw-on lids, and the lids themselves are securely attached to hanging shelves. All that remains is to screw the jar into the lid and the parts will always be in sight and at hand.

If you have the financial means, purchase compact storage systems for hardware, nuts and other parts of different sizes and different fastening capabilities.

Tool storage

Working tools are divided into large-sized and small-sized, so homemade tools for the garage will be different. In most cases, owners prefer to store cutting machines, hammer drills, and other large tools using their “original” drawers. Therefore, for their convenient location along the wall, a rack is made from scrap materials, taking into account the total load on the shelves (for home-made structures, the weight should not exceed 150 kg).

Attention! The stores offer a wide variety of shelving models made of both wood and metal that can withstand loads of up to 500 kg or more. At a relatively low cost, it is convenient to purchase a ready-made shelving for the garage to the desired size, securing it to the wall.

For small tools such as keys, screwdrivers, pliers and others, organize space depending on their number:

the sets are stored in purchased boxes, placed on a rack;
for single items, either cabinets are set up in which each tool is fixed in a corresponding niche, or a perforated surface is prepared (as in a store) mounted on the wall and a specific place is determined for each of the tools.

Some craftsmen place their tools using structures made of plastic pipes, in which holes of the appropriate diameter are made.

Homemade machines for garage work

To carry out repair work comfortably, space is provided for a workbench (it can be folded to save space). To begin with, they work out a drawing of the table, considering the presence of retractable shelves, then they make it from boards or metal sheets, equip it with a vice and a sharpening machine.

In some cases, craftsmen cannot do without homemade machines and other devices made independently and improving the quality of the manufactured item.

Press from improvised tools

Homemade garage press

One of the most sought-after DIY garage gadgets is a press. To create it you will need a hydraulic jack, a metal surface that will serve as the base of the moving part of the press, springs and profile pipes or a channel to create a frame. Further:

create a frame by welding channels and reinforcing the structure with transverse stiffeners; transverse corners are also welded downwards for stability;
the movable platform is attached to the upper frame with springs, and a jack is installed.

The press forces are regulated by a jack.

Homemade screwdriver holder

Depending on the needs of the garage owner, other useful homemade machines are made, for example, a drilling machine, made on the basis of a drill, secured with clamps and moving along a rack using a gear, or a cutting machine, or a lathe.

In addition to the devices listed above, you should take care of the location of work clothes, provide for the presence of a fire extinguisher or sand (based on fire safety rules), and consider ventilation and lighting systems.

Thus, with a little ingenuity and thrift, you can make accessories for the garage with your own hands, thereby ensuring compact storage of things and freeing up enough space for minor car repairs and work related to the maintenance of certain home appliances.

vseogarage.ru

DIY garage accessories

For a true car enthusiast, the garage is a second home. Or even the first one. Therefore, everyone tries to take its arrangement and equipment seriously. The functionality of every square centimeter of space is also very important. This will allow you to work in a spacious room, and tools and spare parts will be stacked and arranged correctly and in perfect order. As for the arrangement in everyday life, we won’t talk today, but today we will try to save on equipment.

What should be in the garage

In principle, there is no such device that cannot be bought. True, not everyone has the opportunity to spend tidy sums on purchasing Bosch equipment; by the way, it is useful to look through catalogs with Bosch or Intertool or Interskol equipment. The young but playful company Jonesway and the same company, repainted from green to brown, Ombra, have great experience and capabilities in this regard.

The catalogs contain a sea of excellent working equipment, devices and universal pullers, mandrels for all occasions and, of course, tools that are difficult to look at without a stingy man’s tears. But the cost in catalogs is unreasonably high, as for a private owner. Service stations, of course, are in more favorable conditions, they earn money with equipment and God himself ordered them to have the best tools. Otherwise, such a master is worthless.

Garage mechanic's wish list

Still, it’s worth making an approximate list of what should be in the workshop, and from it choose accessories for the garage that you can build yourself. Here's what everyone would like to see:

This should be an approximate set of additional equipment, not counting welding, a compressor, two or three grinders and two or three drills and screwdrivers of different power.

Homemade devices

An elementary frame for an angle grinder can become a universal homemade machine. There are a lot of applications, it can be made from anything, even a durable wooden frame. it will become useful in cases where it is necessary to process a small part carefully and with both hands, without clamping the part in a vice. Of course, this design has limitations, but as a small grinder or cutting machine, it will work perfectly.

We do not indicate the sizes; the designs and sizes of grinders are different. The photos show the essence of the device, and it is not difficult to assemble. It’s worth working on attaching the grinder to the frame so that it can be quickly and securely fastened and quickly removed. This device is especially valuable for angle grinders with adjustable speed.

As a base we use a sheet of chipboard of suitable size, which is fastened with hinges, as in this design, or with latches, or you can use a screw fastening.

DIY lathe

The drawing of a small lathe, which is presented, may be useful for those who occasionally have to deal with turning work, but there is no point in buying a tabletop one. This project, of course, will not satisfy those who need high accuracy and high spindle speeds, but it is suitable for minimal turning work. Instead of a spindle made from an M10 bolt shown in the drawing, use a ready-made spindle or a drill chuck.

Designed for processing wooden and plastic parts, the diameter of the part is up to 50 mm, and the length is up to 200, but can be revised if necessary. If we take it as a basis, then replacing the wooden base with any rolled metal, we get something like a tabletop machine for metal lathes.

Tool storage devices

Various small items are often folded in plastic buckets and boxes in the form of a kind of assortment. Therefore, finding the right small tool, drill or nut is quite problematic. Jars for mustard, mayonnaise and other products with a metal or plastic lid that is firmly attached to the jar are perfect for storing small items.

To organize convenient access, you will have to sort through everything, separate the cutlets from the flies, the 10-point bolts from the 6-point nuts, and sort everything into jars. The covers are screwed to shelves or any horizontal surface, and now finding the necessary fasteners will not be difficult.

Magnetic containers can be used for horizontal storage of loose fasteners. Convenient thing. The fasteners will not fall apart, they are always visible, and containers can be arranged as space requires. The main thing is to fix the thin magnetic tape in the right place, and glue large metal washers to the bottom of the containers themselves.

We showed more creative ideas that come to the minds of inventive craftsmen regarding organizing and storing tools and accessories in the photo. Use your imagination and reinvent the wheel. And your garage will be the ideal place for comfortable repairs of your favorite car.

Read also Electric heat guns for the garage, Do-it-yourself overhead garage doors - drawings

ladamaster.com

How to make homemade gadgets for the garage: 2 master classes

Homemade devices can be made from scrap materials. Repairing machines is a complex and responsible task that requires practical knowledge and the availability of special equipment. This equipment includes a whole list of tools that are not cheap. That is why even those car enthusiasts who know how to fix their four-wheeled friend send it to a car service center for repairs. If you decide to get your own accessories for the garage, but do not want to spend a lot of money on such purchases, you can make some of the list of necessary items yourself.

So that your garage can become a place for car repairs. It needs to be equipped with a large number of different tools. Some of them will have to be purchased in specialized stores, but others can be made with your own hands.

Having all the necessary accessories and machines for the garage, you can open your own small car service. Such a garage business will bring you good income.

Garage gadgets are easy to make with your own hands. In fact, there are many master classes on making such homemade products. Let's see which tools are most often made independently.

Which homemade tool is suitable for a garage car service:

First of all, it is a car lift. Not a single auto repair shop can do without this equipment. The price of such a ready-made device is high, but if you wish, you can make it yourself. Today we will talk about the technique of creating such accessories.
A hydraulic press is also necessary for a garage auto repair shop. This device helps compress unnecessary parts. You will be pleased to know that you can make it yourself with minimal investment.
Also important are useful accessories such as a comb for a spotter. Such equipment is easy to manufacture, but in finished form is very expensive.

For a car service center, you can make metal shelves that can be moved with your own hands.

These are not all the devices that you can make for your garage with your own hands. However, it is the useful homemade products described that we will make today in our master classes.

Garage accessories: room arrangement

Before we begin describing how to make garage accessories, we suggest putting things in order in the auto repair shop itself. After all, each tool should have its own place, so it will be easier for you to work.

Homemade tools are very practical, but do not always look aesthetically pleasing, so it is better to keep them away from prying eyes. But, for example, such a device as a drilling machine and jacks can be placed in a prominent place.

You won’t be able to make a drilling machine yourself. In this case, the main thing is to choose the right tool correctly.

Now let's talk more about organizing the workspace. If you decide to make a car repair shop in your garage and make money from it, then you will have to prepare the space accordingly.

How to organize tool storage space in the garage:

First of all, we advise you to make some wooden boxes for you. In some of them you can make a shelf with holes for screwdrivers.
It is also necessary to make mobile racks for heavy tools. This will allow you to change the locations of these shelves, placing them in a place that is convenient for you.
So that while you work, you don’t have to constantly run for the tool, you can use a special belt that will hold your essentials. You can buy such devices or make your own.

These homemade tool storage spaces will help you organize your garage space. Thanks to this, everything you need will always be at hand. This will significantly save your time.

DIY garage equipment: making a lift

Every auto repair shop needs a lift. This device helps keep the machine in a raised position for the amount of time you need. This allows access to all hard-to-reach areas.

Of course, you can buy a lift in specialized stores. However, the price of such products will unpleasantly surprise you.

You can make a lift for a car repair shop yourself. You don't even need to have welding skills to do this. Therefore, you can easily cope with such work.

In order to assemble the lift, you will need:

Worm gearbox, the load capacity of which will start from 300 kg;
Steel corners with dimensions 7.5x7.5x0.8 cm - 2-3 pcs;
A certain number of bolts;
You will also need a steel plate at least 1 cm thick;
Two iron chains, at least 2 cm thick;
Steel cable with a half centimeter section;
Metal hook;
Two keys in the shape of an asterisk.

It is easy to make a lift from such materials without spending a lot of effort. The main thing is to perform all actions carefully and efficiently.

To make a good garage lift, you need to use high-quality metal

How to make a car lift:

Steel corners must be attached to opposite walls. In this case, they should be located at the same level.
A plate is attached to the corners. This is done using eight bolts. Thanks to this connection method, the plate can be moved relative to the engine.
A worm gearbox can be installed on the plate.
One of the keys, the one with a larger diameter, must be secured to the drive shaft of the gearbox.
One hole must be made on the plate. A chain is passed through it and closed into a ring.
On the output shaft of the gearbox, you need to install a smaller key.
You need to drill a couple of holes in the lift plate.
You need to pass the second chain through the drilled holes. One of its ends is placed over a smaller dowel, and a hook is hung on the other.

At this point, the manufacture of the lift is completed. You just need to test it in action. By spending very little time on such work, you can save an impressive amount.

How to use a garage accessory such as a lift

Using this lift is quite simple. However, in order not to damage anything, you must follow several rules.

How to use a homemade lift:

Unscrew the bolts that connect the car's engine to its frame;
Carefully place the loops of the steel cable under the engine. Throw the ends of the cable onto the hook.
Handle the chain carefully. Gradually the cables will tighten, which will set the engine in motion. Perform all actions slowly and smoothly.
When the engine is raised to the required height, you can stop the lift. The gearbox will hold the structure.
In the place where the car was parked, it is necessary to place a table that can support the weight of the engine.

Before using the lift, you need to read the instructions

Using a lift will make your work in the auto repair shop much easier. Therefore, it is worth spending time and making it yourself.

Machines for the garage: making a hydraulic press

A hydraulic press is often used in auto repair shops. It is necessary for installation and repair work. This device works on the principle of a jack.

Such a device can have a very high price. Some models can cost several tens or even hundreds of thousands. It is precisely because of the cost of the factory product that a hydraulic press is often made by hand.

There are several positive aspects of making a hydraulic press yourself. Let's get to know them in more detail.

Why making a hydraulic press with your own hands is a good idea:

A homemade hydraulic press can be made specifically for the work you need. This applies to both its size and its performance.
You can assemble such a jack from scrap materials. Therefore, the price of such an assembly will be low.
You can be confident in the quality of the assembled product. If necessary, it can be repaired.

The hydraulic press is made of a jack, channels, two metal angles, bolts and springs.

From time to time, the hydraulic press should be inspected for worn or damaged parts.

The structure is assembled according to the diagram. All elements are fixed using welding and bolts. It is very important to place the jack in the correct position.

Homemade garage tools: making a comb

We also want to tell you about making a comb. This spotter tool can be used to smooth out dents on doors. It can be purchased in specialized stores, or made with your own hands.

How to make a comb for a spotter with your own hands:

Take a metal strip and make three holes in it. The first should be at a distance of 1.5 cm from the edge, the second at a distance of 2.5 cm, and the third - 3.
Now between the two holes (which are closer to the edge), you need to cut a jumper with a file. After finishing this work, instead of two round holes, you should have one oval hole.
From the third hole we make a cut towards the edge. There should be a recess for the washer.
Now we cut out a kind of semicircle above the hole we made. As a result, you should have a hook with an oval hole and a rounded notch. Make four more of these pieces.
Take a tube with a diameter of 1.5 cm. At a distance of 2 cm, drill a hole with a diameter of 8 mm. After two cm, cut off the tube.
On the other tube, make a semicircular recess; our workpiece should ideally fit into it.
We weld the tube with the recess to the workpiece so that the hole is on top. A nut must be welded to this hole.
We take another tube, weld a washer on one side and put our hooks and blank on the other. The comb is ready.

This comb is no worse than a store-bought one. It does its job well and is inexpensive.

DIY garage gadgets (video)

Garage accessories are not difficult to make yourself. To do this, you just need to put in effort and ingenuity. Go for it!

Examples of DIY garage accessories (photos)

Attention, TODAY only!

oteplicah.ru

Homemade machines and devices for the garage. Read the article!

By making homemade machines and accessories for the garage with your own hands, you significantly save your and your family’s budget. Homemade shelving, various furniture, workbenches and even some tools - you can do all this yourself.

Do-it-yourself machines for the garage are necessary to solve the following problems:

The process of processing metal products is simplified,
New opportunities for sanding and processing wood are emerging,
A machine in the garage allows you to save on the purchase of an electric saw and other woodworking equipment.

As a rule, any of the racks or power tools are quite expensive on the construction market. That is why owners of garage boxes come to the idea of creating some devices on their own. The most popular options for homemade home tools are:

Manual or semi-automatic metal carpentry workbench;
Wooden or metal workbench;
Drilling machine for garage;
Homemade press design;
Various variations of shelves, racks and organizers for tools;
A hoist or winch for lifting heavy parts and things.

How to make drilling machines for the garage with your own hands?

Drilling machine for garage

Thanks to this homemade device, you can do an excellent job of making any number and diameter of holes for metal and wooden objects right in your garage workshop. The simplest and at the same time reliable option for manufacturing a machine is to use a drill with a frame. To make the device you will need:

Metal frame in the form of a base;
A small mechanism for rotating the drill;
Low vertical stand for attaching a drill.

In the form of a stand, it is best to use scraps from chipboard or unedged boards. Due to the low weight of the drill, there is no need to use a metal profile. At the same time, it is better to use a cast iron base for the bed - it will avoid the occurrence of any vibrations during operation of the equipment. In the video you can see how to properly make homemade machines for the garage with your own hands.

How to make a carpenter's vice in the garage?

To create a vice with your own hands, you will need to connect the following elements in the correct sequence:

Several supports, each of which will be a sponge for clamping the product,
One metal jaw,
A set of steel guides, which are used for smooth movement of the jaw,
Lead screw design
An element called a driver that sets the screw in motion.

The first pipe support will act as a kind of body. It will be necessary to solder other supports to it from below and install a steel flange. We drill a hole specifically for the movement of the running nut and weld a sponge opposite. To operate the equipment, all that remains is to install a pin in the holes, secure it with nuts and insert a movable tube next to it. As a result, making a vice for a garage with your own hands is not particularly difficult.

DIY forge in the garage

If you decide to make a forge in the garage, then you do not need to buy expensive components - everything can be made from scrap materials. The main forge will be an old gas stove. We install it in the chosen place, having previously lined the base and frame of the structure with refractory bricks (fireclay) and coated all the cracks with clay.

The next step is to make a grate. For a mini forge in the garage with your own hands, you can weld it from an old piece of steel. It is advisable to choose a metal of at least 10-15 mm. Next, bellows are made for supercharging, a block of which can be quickly put together from thin-walled plywood and several pieces of board.

The last step is to prepare the fuel. You can buy coal in a store or make it yourself in a trench using a large duralumin pan. To do this, load chopped firewood, close the lid tightly and coat the cracks with the edges with a clay mixture. Make a firebox in the trench and heat the coal “until ready.” As a result, you get a full-fledged forge in the garage, made by yourself.

Nowadays you can easily make useful things for your garage using scrap materials and tools. If you have any questions, write them in the comments!