Do-it-yourself rocking chair made from professional pipe, drawings. Metal rocking chair. Video: simple plywood rocking chair

Many of us are familiar with such a piece of furniture as a rocking chair, which can be found in many country houses. For most, it is one of their favorite places to relax, but not everyone knows that anyone can make such a chair. However, first you need to acquire certain knowledge, skills and prepare a tool.

IN last years The rocking chair has become a fairly common piece of furniture. There are many in stock furniture companies you can find a large number of models of rocking chairs designed for use in apartments and offices. Moreover, among them there are models made in the classic version using the weaving method, as well as modern products that fully satisfy the requirements of the high-tech style.

Advantages of a wooden chair

Before you start manufacturing, you need to decide what material to use as a base. Although there are many options, the most common one is the wooden chair. Therefore further Let's list the advantages, which this material has:

• environmental Safety. Wooden furniture has been very popular among consumers for many years, which has provided it with such qualities as natural origin, safety and hypoallergenicity. Therefore the owners wooden chairs do not encounter any inconveniences when using it, since they are confident in the environmental friendliness of this material;
• strength and long service life. The tree is enough durable material, which was passed on to the furniture made from it. In addition, it perfectly withstands mechanical stress and demonstrates a long service life;
• attractive appearance and variety of shapes.

Rattan rocking chair

We repeat that rocking chairs today offered in large quantities the most various options. One of these products is a rattan rocking chair, which not only has a pleasant design, but can also harmonize perfectly with other elements of the cottage interior. The homeland of rattan is South America, and this plant itself is often called a flexible vine.

Among the features of this material, it should be noted its high strength, which it is capable of compete with willow twigs.

The technology for making chairs from this culture is characterized by the fact that instead of traditional connections based on screws and bolts, glue and skillful knitting are used. Alas, in our country it is impossible to buy this tree, so most owners country dachas It will not be possible to make such a chair with your own hands.

Wicker rocking chair

A photo of the options available today for this piece of furniture allows us to judge that a wicker rocking chair is quite in demand today. It can be found in dachas and even in apartments in many regions of our country. Willow vine is used as material for it, and ready chair fits well into the interior garden house, cottages and even garden greenery. Consumer rocking chair from willow vine attracts primarily because of its low weight and high strength. However, such furniture has one serious drawback: excess humidity has a negative effect on the material, so it is not recommended to keep such chairs outdoors in wet weather.

Materials for production

Regardless of what type of wood you decide to use to make a wicker chair, you must have certain skills. Wood is accessible and easy to process, so many owners who are thinking about making a rocking chair with their own hands most often consider the option of using wood as the basis for it. But first it is necessary prepare certain tools for making furniture:

• electric jigsaw with a set of blades;
• disc sander with a set of coarse and fine-grained attachments;
• screwdriver with drills;
• tape measure and angle with ruler;
• hammer and spatula;
• brush and pencil.

Execution of the drawing

Even before you start work, you should take into account that to make a high-quality rocking chair with your own hands, a drawing is required.

Having a sketch in hand, you can avoid serious errors regarding the dimensions of the product and correctly determine the quantity of materials that you will need for manufacturing.

First you need to take metal mesh, each cell of which corresponds to 1 cm, and mark a template for the side of the chair on it. To make it more convenient to work further, it is recommended to transfer the created chair template onto plain paper. This will make it easier for you to mark the outline of the chair on the plywood itself. Don't worry if there are minor errors. Here it is important to maintain the symmetry of the sidewalls and avoid protruding corner elements on the outer rolling part.

To complete this work we will need plywood 3 cm thick, from which three drawers are cut dimensions 120 x 800 mm. Sidewalls are manufactured using electric jigsaw exactly according to the pattern. After this, you need to take a beam 50 mm wide and 25 mm thick and cut out 35 fragments from it, the length of each of which should be 120 cm. The finished beams will subsequently serve as a seat and backrest.

Try to purchase enough timber at the very beginning to minimize waste. This will be quite easy to do, given that you will be able to calculate the total length of the beam before purchasing. Let's say, if it has a length of 2.3 m, then it is better to make the chair narrower. As a result, its width will decrease to 115 cm, however, this will allow you to avoid waste. The given dimensions of the rocking chair do not require their exact observance. Therefore, if in the process of work it becomes clear to you that it would be better to increase or decrease the size to minimize waste, then you can do it without fear.

Workpiece processing

Surface treatment of workpieces is carried out using grinder. When performing an operation, it is necessary Special attention give them to the ends. If wood fibers appear on them during work, you need to use a hammer and level them, and then treat them with hot drying oil. This way you will make the ends of your furniture more resistant to moisture, which will have a positive effect on its service life. When the drying oil dries, it is necessary to re-process it to consolidate the result.

The chair is assembled based on the drawing of the rocking chair. Need to fasten two sides, drawers are used. But first you need to mark the places where they will connect.

According to common patterns for making rocking chairs, it is recommended to fix them in the head area, in the middle and in the legs. When you have to attach the tension strips to the sidewall, use confirmat for this. This name is given to a special screw tie with which the wood materials. First, before fastening, it is necessary to create 8 mm holes in the sidewall and 5 mm in the end of the drawer.

Next, we begin work on creating the seat and attaching it to the base. Take earlier prepared 35 pieces of timber, in which you need to make four holes for two on each side. After this, the bars must be fixed to the sidewalls. Considering the number of holes present, it is recommended to fix the bars using 3 or 4 mm self-tapping screws. When attaching the boards, constantly check that they are installed horizontally.

Processing of the finished product

If we turn to the experience of ordinary owners making rocking chairs from wood and plywood with their own hands, we can identify a number of serious mistakes, admitted after assembly. Among them, I would especially like to focus on low-quality finishing or its absence. To do everything correctly and ensure the chair has the longest possible service life, it is necessary do the following:

• treat the hole above the screws with putty;
• cover with a layer of antiseptic;
• Apply waterproof varnish in two or three layers.

If you carry out all the work described above exactly, you can be sure that a rocking chair made by yourself will be able to please you for many years.

If you are going to start making a rocking chair with your own hands for the first time, then it will be useful for you read the recommendations experienced craftsmen who have performed this work more than once:

Other types

One of the varieties of this piece of furniture is wooden Baby chair . It is made according to the same scheme as described above, but you need to adjust the size to the age of the child. This also applies to the tilt of the back and arms. Quite often, children's chairs are made in the shape of a horse.

Of particular interest is the rocking chair for the office. The peculiarity of its production is that leather is used for cladding, as a result of which the product acquires a respectable and solid appearance. Having such a chair at hand, a person will have the opportunity to relax and unwind during the working day.

Conclusion

Although furniture manufacturing offers enough big choice furniture, one of the things desired by many cottage owners is a rocking chair. Having settled down in it, you can relax and allow yourself to forget about everyday affairs for a while.

Moreover, in order to personal experience To feel all the benefits of having such a piece of furniture, you don’t have to spend a lot of money on buying a rocking chair. You can always make it yourself. Considering that for this you can use available materials and tools, this task can be completed by anyone who has at least once held a hammer and saw in their hands. There are many ready-made ones on the Internet manufacturing plans for similar furniture, therefore, if you strictly follow the manufacturing technology of a rocking chair, you can create a fairly elegant and reliable product that can serve you for many years.

Reading time ≈ 10 minutes

Comfortable furniture- this is one of the important components home interior. Everyone associates a rocking chair with comfort, because it is so nice to sit in it by the fireplace with a cup of tea and relax. This piece of furniture can fit into any style and also serve as an independent decor. You can make a rocking chair from wood yourself; to do this, consider photo examples with drawings and progress of work.

Design Feature

You can swing on the chair anywhere, calming your nerves and relieving stress. This is one of the simplest and available funds for relaxation. You can purchase it at furniture stores, order on the website or make it yourself in a home workshop.

Why is the rocking chair so popular:

At the same time, you can place the chair everywhere: in the bedroom and in home office, and on the terrace country house, and even in the office. How to make a rocking chair with your own hands from wood using photos and drawings will be shown in a video with the progress of the work and detailed instructions.

U wooden structure has its advantages:

The main part of the rocking chair is arc-shaped skis or runners, due to which rhythmic rocking occurs. If the runners are made long, the amplitude and depth of the swing will be large, you can smoothly move from a sitting position to a lying one. And if you assemble it with short runners, the swings will be insignificant, soft and smooth. These chairs are more suitable for older people.

Wooden chair on runners

Types of chairs

Today you can find a huge number of models wooden rocking chairs of various shapes, sizes, breeds, styles and purposes.

Rocking chairs are:

To make a rocking chair for your dacha with your own hands from plywood, you will need drawings and instructions experienced craftsmen as in the video below.

Depending on the type of chair design, there are:

How does rocking happen?

Many people assemble rocking chairs according to ready-made drawings, but the products may not always fit the size of a specific person. Therefore, before starting production, you should understand the kinematics of this product:

• If a person stands upright, the center of gravity (CG) of the body is between the lower back and the sacrum inside the spinal column. If a person is in a sitting position, the CG shifts slightly forward and down. In rocking products, the overall CG is always shifted back and down in initial position. In this case, there is a slight error in the projection of the main center of gravity in relation to the supporting surface (floor, soil, etc.), which can be corrected at the end during balancing.
• Most of all, the stability of the structure is affected by the displacement of the general CG relative to the vertical central axis(CO). If the CO coincides with the COG, this is a state of free balance, which is impossible to achieve in a rocking chair. If the center of gravity is greater than the center of gravity, there is a high probability of tipping backwards. It is necessary that the central center is 450 mm or more higher than the central central point (recommended excess is 600-700 mm).

In other words, general center the gravity of the rocking chair should be shifted from the seat to an angle intermediate between the back and the seat. The supporting legs are two arched strips, thanks to which smooth swinging is possible. The amplitude depends on the length of the runners.

How to choose material and design

Modern models of rocking chairs are made from various materials, each of which has its own characteristics:

To make a rocking chair from solid wood, it is best to use conifers: larch, pine, alder or spruce. The density and weight of such wood are low, which is very convenient when working with the material.

Tips from the experts:

Assembly steps

Modern furniture manufacturers are ready to offer huge assortment models various forms, colors, styles and materials. However, if there is time and desire for self-assembly home rocking chair, you need to safely purchase everything necessary materials and get to work.

The simplest model

Tools and materials:

1. Screwdriver or drill.
2. Tape measure for measurements.
3. Self-tapping screws.
4. Special wood glue.
5. Electric jigsaw.
6. Thick cardboard for patterns.
7. Sandpaper for sanding.
8. Sheet of plywood.

Step-by-step instruction:

How to make a rocking chair with your own hands is shown in the video master class with detailed step-by-step instructions.

Rocking chair with curved skis

For assembly you will need:

1. Tape measure for measurements.
2. A simple pencil.
3. Graph paper.
4. Screwdriver.
5. Electric jigsaw for working with wood.
6. Sander.
7. Metal confirmants.
8. Wood board for cutting skis 300/20/4 centimeters.
9. Board for frame 300/10/2 cm.

Country chair with curved skis

Step-by-step assembly instructions:

In most cases, additional balancing of the product will be required so that the chair does not cause discomfort when rocking, sitting and standing.

How to balance a swing structure:

A rocking chair will always remain a desirable piece of furniture, because it is so pleasant to sit in it and forget about all the problems. You don’t have to spend a lot of money on a purchase; you can make such a product yourself. A ready-made instructions and the drawings will help with this.

Today, a rocking chair is not a forgotten antique, but a popular and comfortable element of the interior. It is found not only in dachas and country houses, but also in reputable offices and apartments. A rocking chair is expensive furniture, but if you have the desire and a few materials, you can make it yourself from plywood.

Advantages of a homemade plywood rocking chair

The main advantages of plywood are strength and lightness. A rocking chair made of this material is convenient to rearrange. In addition, plywood furniture fits harmoniously into the interior of any room.

The surface of the rocking chair is easy to process different ways(by sanding, painting, varnishing or special film) - therefore, decorate it and carry out redecorating the subject will be very simple.

A rocking chair made of plywood is highly moisture resistant, which significantly extends its service life. The advantage of such furniture is that it is made from environmentally friendly materials and therefore does not require special care.

The wooden elements of the rocking chair fit perfectly into the interior

Design requirements and dimensions

Depending on where the rocking chair will be used (on an open lawn or indoors), plywood of different thicknesses and types of wood are selected. If the item will be placed in areas with high humidity, use oak plywood. The main thing is that during manufacturing the material is relatively dry (humidity from 3 to 10%).

The most comfortable height of a rocking chair without a headrest is about 90 cm, with a headrest - 110–115 cm. An item of this size is suitable for the height of an average person.

The height of the supporting sides to the top of the seat should be about 35 cm, so that the person sitting in the chair can swing with their legs stretched out a little.

The seat of a rocking chair will be comfortable if its length and width are 50 cm. Such parameters will ensure a comfortable fit in the chair. You can make it wider, which will allow you to sit more comfortably and tuck your legs. Optimal angle backrest tilt - 15 degrees or more. It is better to move the armrests slightly apart from the rocking chair seat by 13–15 cm.

Particular attention must be paid to the radius of the runners. If it is large, the chair will constantly fall back, which can lead to tipping over. Due to the runners with a small radius, the object will quickly return to its original position - this will create the effect of a twitching swing, which is also inconvenient. It is better to select the thickness of the runners from several pieces of thick plywood glued together.

Whether you use short or long runners makes a difference. A chair with long parts has a greater depth and amplitude of rocking, in which the sitting position changes to a reclining position. An object with short amplitudes has a smaller amplitude, so the person remains in a sitting position all the time.

Rocking chairs with long runners are classic version, suitable for everyone.

Rocking chair design: 1 - sidewalls; 2 - drawer; 3 - stand; 4, 6,7 - cross members; 5 - back slats; 8 - step

Required materials and tools

To make a rocking chair yourself, you will need to prepare the following:

• Sheets of plywood.
• Wooden beam (length - 53 cm).
• Jigsaw or grinder.
• Set of wood files ( saw blade ranging from 50 to 105 mm).
• Hand router or disk router Grinder with attachments of different grain sizes (you can use regular sandpaper).
• Measuring tape and pencil.
• Electric drill with wood drill bits.
• Screws, nuts, washers.
• Sintepon.
• Thick fabric for upholstery.
• Furniture stapler, glue.
• Wood paint, varnish.

To make rocking chair parts, it is better to use plywood sheets, the size of which is 1520x900 cm, and the thickness is 4 mm, 10 mm and 15 mm. For the side elements you need material 4 mm thick. If the necessary sheets no, then during the work process it will be possible to cut out several identical parts from thin plywood and glue them together.

Since plywood has different thickness, then the appropriate tool is selected for cutting a specific material. Sheets up to 1.5 mm thick are cut with a sharpened knife. Sheets up to 6 mm - with a jigsaw, and thicker ones - with a jigsaw or grinder.

Tools for working with plywood are selected taking into account the thickness of the material

Preparation of plywood and general rules for working with it

First of all, you need to conveniently organize your workspace. When cutting a large plywood sheet there should be enough space in the room.

To avoid rapid wear of the rocking chair parts, it is necessary to treat the plywood with one of the suggested means:

• fiberglass;
• varnish;
• drying oil;
• paint.

Pasting with fiberglass significantly increases the service life of plywood. If it is not possible to use this coating, you can use regular gauze instead. To join materials, a varnish without polyester and epoxy components is used.

Coating with drying oil will help increase the moisture resistance of plywood

Varnishing helps protect plywood from external influences. Treatment with paint and drying oil, which forms a waterproofing layer, will help increase moisture resistance (impregnation will be even more effective if it is preheated in a water bath to 60 degrees).

Particular attention should be paid to the end sides of the plywood parts. They require additional insulation and careful processing. To protect them, you must do one of the following:

• putty the ends of the plywood;
• treat with deeply penetrating primers;
• apply thickly rubbed paints;
• cover the edges with metal or plastic edging.

When working with plywood, you must adhere to the following rules:

• It is not recommended to saw plywood across its fibers - this will lead to cracking of the edges of the sheet.
• It is better not to drive nails or screws into a sheet of plywood, as this will lead to cracking of the surface. To prevent this, you need to pre-drill the holes. If, after all, the plywood parts are connected with screws, it is necessary to put metal washers on them.
• To give the plywood desired bend or mold, its surface should be wetted and left in this position for several hours.
• Before gluing plywood parts, their contacting surfaces must be cleaned sandpaper, then clean the material from dust and apply glue parallel to the plywood fibers. The parts to be glued must be placed under a press.

Instructions to help you make a rocking chair with your own hands

Making patterns and transferring drawings

1. To make a pattern, you need to mark a sheet of paper into identical cells measuring 10x10 mm, and then redraw the prepared drawing, taking into account all the nuances.
2. After this, it is necessary to draw out the cells enlarged to the required size on plywood and transfer the images of the parts, saving space on the sheet of material.

Sawing plywood into parts

1. In accordance with the drawing, cut a sheet of plywood 15 mm thick using a jigsaw or grinder into parts: side elements, seat supports, stands. You also need to prepare four planks (47x4.5 cm, 54x4.5 cm, 48.5x4.5 cm and 47x4.5 cm), which will be the cross members of the rocking chair structure.
2. From a sheet of plywood 10 mm thick, cut 18 slats for the back and 16 for the seat. Their sizes are 54x3 cm and 50x3 cm. Use 4 mm thick material to make parts for the back and seat.
3. For the rocking chair footrest you will need to take wooden beam and with the help electric drill Drill holes for screws in it.
4. After all the parts are ready, they will need to be cleaned with sandpaper. It is recommended to treat the back, seat and armrests especially carefully.

Assembly of the structure

1. First, you need to assemble the back and seat from thin strips 10 mm thick. These strips must be glued to the back and seat parts cut from 4 mm thick plywood. This design will allow you to form a curved shape. Connecting parts better waterproof glue PVA for carpentry.
2. Next, crossbars are attached to the base of the backrest and seat, and after that - the sidewalls and footrest. When connecting parts with screws, metal washers must be used.
3. After assembling all the parts, the back and seat can be covered with padding polyester and upholstered in fabric, leatherette or leather. To do this you need:

• make a pattern according to the dimensions of the rocking chair;
• apply to the seat and back thin layer PVA glue;
• put a layer of burlap on top (thanks to it rough surface the filler will not clump);
• put padding polyester on the seat and back;
• cover the back and seat with fabric;
• by using furniture stapler secure the material.

By making a homemade rocking chair, you can save a lot and get a comfortable and high-quality item. Furniture made in compliance with all requirements will be long years delight you with its convenience.

Most people associate a rocking chair with rest and relaxation. The imagination pictures a veranda of a country house, a warm blanket and a glass of wine. Is it possible to make this piece of furniture, synonymous with a measured life, with your own hands? After reading this article, even a novice master will easily cope with this task.

• glider;
• classic on runners.

Each type has a number of features, so let’s consider them in more detail.

Glider (with pendulum mechanism)

This type of furniture has a fixed base, and swinging occurs using a pendulum mechanism. It has a number of advantages over the classic one, but the main advantage is silent operation. That is why it is often purchased by mothers for feeding and rocking babies.

Classic on skids

This type of rocking chair is known to everyone, but not everyone knows what a wide variety of subspecies of this piece of furniture exist.

1. On simple runners of constant curvature (radius).

   Radius runners are the simplest and most common type of support

   However, it is worth knowing that this is not the safest design option. Professionals make custom-made, as a rule, rocking chairs on runners that are not of constant, but of variable curvature, which are calculated taking into account the height and weight of the users. It is these models that have the lowest risk of capsizing.

2. On elliptical skids with tilt stops.
3. On springs.
4. Vanka-stand-up.

What materials can a rocking chair be made from - table

Rocking chairs made of plastic, metal, rattan, willow wicker and solid wood - photo gallery

Armchairs for home and garden

It is better to use products made from environmentally friendly materials in your home. pure materials, not too heavy so as not to spoil the floor covering. Size also matters if your apartment is not too large. Most suitable option- plastic and wooden products. Wicker furniture also suitable, but not always appropriate in an urban interior.

If you plan to use furniture for open air, then it is necessary to take into account some points: how resistant the material is to moisture, exposure to the sun, and whether it is easy to wash. With certain preparation, a product made from almost any material can be used outdoors - forged, plastic, wooden models. Designs with a sun awning are relevant on hot days.

You can also make original rocking chairs from chairs that have been going to be repaired for a long time.

Photo gallery: options for wooden garden chairs

DIY rocking chairs

Making this piece of furniture is not entirely simple task, but it can be done even by those who have never done anything like this before. There are many designs, options and manufacturing methods. Let's look at the most interesting and simple ones.

The simplest chair from an ordinary children's highchair

The best option is to use ordinary wooden chair. For production you will need following materials and tools:

• chair with back and armrests;
• high-quality plywood 15 mm thick;
• wood varnish;
• jigsaw;
• milling cutter;
• Sander;
• dowels

Stages of work:

1. We cut out radial runners from plywood according to the diagram using a jigsaw.
2. We sand them with a machine or sandpaper on a lath.
3. We make cuts from the bottom of the chair legs and select grooves for the runners.
4. We insert the runners into the grooves of the chair legs, fix them with glue and dowels.
5. We cover the surface of the rocking chair with varnish.

Video: making a high chair

Vanka-stanka: step-by-step instructions, photos, drawings

It will also be easy to make such a rocking chair from plywood yourself, if you know the drawing. There are many options on the Internet, we will present one that does not have the risk of capsizing.

Materials and tools for assembly:

• sheets of plywood measuring 1520x800 mm, 15 mm thick (for sidewalls, racks and supports), 10 mm thick (for back and seat slats);
• jigsaw;
• glue;
• screws.

Chair assembly steps:

1. We are preparing a drawing of the future product.
2. We transfer the drawing onto sheets of plywood.
3. Cut it out necessary elements using a jigsaw.
4. We drill holes for the screws.
5. We sand, prime and paint all the elements.
6. We assemble the frame.
7. We form the seat and back from the planks and glue the elements.
8. We fix all the elements with self-tapping screws.

Video: simple plywood rocking chair

Is it possible to assemble a pendulum mechanism for a sliding chair on your own?

The pendulum design moves the upper part of the chair relative to its base. To do it yourself you need detailed diagram. It's not an easy job. But the principle of operation of the mechanism is always the same. For simplest design you will need:

• 4 bars of the same length and two of a larger length (sizes are chosen depending on the design diagram);
• 8 bearing nuts and washers.

Instructions:

1. Assemble the bars and drill one hole in them at each end for the bearings.
2. Make an end beam (it holds the weight of the entire sliding structure):
   
3. Attach each end part to two bars. This will be a simple pendulum mechanism. Next, it is connected to the base of the chair and the seat. Example finished design below.

Rocking chair made of plastic (polypropylene) pipes: diagram and operating procedure

The chair can also be made from profile metal or simple water pipes. To work you will need:

• plastic pipes with a diameter of 25 mm (for sidewalls) and 20 mm (for transverse elements);
• drill and pipe welding machine;
• fittings with a cross-section of 15 mm (inserted into pipes to enhance the stability of the chair);
• fittings for corner connections(2 pcs. – for 90° and 6 pcs. – for 45°);
• pipe plugs;
• pencil, ruler.

Instructions:

To make the chair comfortable, you need to attach a 50 mm thick foam mattress to the frame. To do this, you will need a cover with ties, which is easy to sew yourself (by machine or even by hand).

Give plastic pipe rounded shape You can use hot sand. To do this, the sand is heated in the oven to 95–130 °C, a plug is inserted into one end of the part, the tube is filled with sand, given the required shape and wait for it to cool.

Desire and basic skills in working with tools are all you need to independently build a comfortable and beautiful rocking chair for your home or cottage. The described instructions will help you do this correctly and quickly.

Arranging a summer cottage includes not only building a house and laying out a garden or vegetable garden. For comfort, you need to have at least a minimum of furniture in your dacha, for example, an armchair. You can, of course, buy it in a store, but if you have at least minimal skills in handling tools, then a DIY rocking chair made of metal is on your summer cottage will decorate your life.

You can make a rocking chair yourself; it will cost much less than buying it in a store.

This item can be made from the following materials:

• tree;
• metal, as mentioned above.

Next we will consider the option self-made. This rocking chair is made from rods or pipes of aluminum or steel. To create it you need minimal amount metal Eat different types such rocking chairs:

• all metal, forged;
• structures welded from rods or pipes;
• combined: their base is made of metal, and the seat is made of wood or plastic.

Rocking chair with forged elements difficult to manufacture. Therefore they will not be considered.

Welded option

To create a structure from metal rods, you can use welding machine or drill and bolts.

First, a drawing is made. For a sample, take a simple chair, and transfer all its dimensions onto paper, and in order to turn it into a rocking chair, you need to draw a segment of an arc on the drawing to the legs. All this is done on the same scale, and therefore its radius is freely determined from the drawing.

The swing range depends on it: the smaller the radius of the arc, the greater the likelihood of injury.

On construction market purchase steel rods with a cross section of 20 X 20 millimeters. They are cut to size and then the base of your rocking chair is welded according to the drawing. Then arcs are bent from the rod and welded to the legs on the frame. To create a seat, you can go in several ways:

• the rods are cut into sections of the required length and welded into the main frame in increments of 5-6 mm - the chair will be very durable, but the amount of work will increase and the metal consumption will increase;
• A sheet of metal 2 mm thick is welded onto the frame along the entire length of the seat and back of the rocking chair or screwed with screws.

One option for this design is a completely curved metal sheet a bed with arches curved from steel or aluminum pipes.

When using this option, you must take into account that sitting on metal is not always pleasant, and therefore do not forget to place small pillows on the seat and back.

To make the base lighter, it can be made from aluminum pipes with a caliber of 20 millimeters. They are cut to the size you need and connected to each other with screws and steel angles.

The seat bed can be made of tarpaulin or any dense material in the same way as it is made on a couch, or it can be made of wooden blocks, as described above.