Attaching the toilet to the floor with your own hands. How to fix a toilet to the floor: an overview of technical details and the best installation methods Toilet screws

Installing a toilet on a tiled floor can be done in several ways, depending on the design of the plumbing fixture. Before starting installation, you should carefully study the instructions, prepare the necessary tools and carry out preparatory work.

In most cases, you can carry out the procedure yourself without the help of specialist plumbers.

After completion of the installation work, water supply is also carried out. It is also important to follow a certain algorithm of actions.

Preparation for installation work

The preparatory stage consists of the following steps:

• choosing a suitable location for plumbing fixtures in the toilet, creating markings;
• sewerage and water supply outlet. The ends of the pipes should be approximately 13-16 cm from the surface so that the device can be connected to communications;
• If a room is being renovated, you first need to lay tiles and then begin installing the plumbing. Otherwise, you will need to cut the required pedestal shape from the floor tiles.

After preparation has been completed, you need to prepare the necessary tools.

Tools and materials

To install on tile floors, you will need the following tools:

• a marker, pencil or chalk to mark the outline of the base on the tile or floor;
• a drill designed for ceramics and a drill for plastic dowels;
• product - sealant to ensure waterproofing;
• standard set of screwdrivers;
• drill or hammer drill;
• core for cleaning the top layer of tiles;
• wrench and adjustable wrench;
• bolts for attaching the toilet to the floor;
• pliers;
• grinding machine with diamond wheel;
• connecting hose;
• tap;
• an adhesive (for example, liquid nails), if you plan to use method No. 3 to attach plumbing fixtures to a heated tiled floor;
• plastic dowels;
• plastic spacers for bolts;
• spatula to remove any remaining sealant or adhesive.

Methods of fixing to a tiled floor

There are several options for installation, which differ in labor intensity and technology, they depend on the model of the plumbing fixture. It should be noted that all the procedures described below are not very complicated, but to carry them out correctly, it is imperative to follow the exact instructions.

To perform the last method, which involves adhesive fastening of the toilet, it is advisable to have at least a little experience in repairs. If you have no experience, you can first practice on a small part of the tile.

If the tiles on the bathroom floor are very expensive, then it is advisable to entrust the installation of the toilet to specialists. Otherwise, in the process of work, you may accidentally damage the floor covering.

Types of toilet sink mounting and corresponding installation method:

• Method No. 1 - used for vertical arrangement of fasteners, dowels are used in the process;
• Method No. 2 - when placing the fasteners on the side, the toilet is fastened to the floor with corner brackets;
• Method No. 3 – use of an adhesive in the presence of a system of heated floors and communications under the floor covering.

Method No. 1 - with vertical arrangement of fasteners

This method of installing a plumbing fixture on a tile floor is the least labor intensive. It is suitable for models that have ready-made mounting holes at the bottom. Installation instructions:

1. The optimal location for placing the plumbing fixture is determined, taking into account the distance from the drain to the entrance to the sewer. This length will be required when selecting a corrugated pipe connecting the toilet to the sewer.
2. The contours of the selected installation location should be marked on the tile with a marker or chalk, and the location of the factory holes for fastening to the floor should also be marked. It is important that the product is installed strictly perpendicular to the floor, because otherwise, the risk of slight displacement of the toilet during fastening increases.
3. At those points that were marked on the tile in the previous step, use a core to knock down the tile covering to prevent the tool from accidentally slipping while performing the procedure. It is advisable to moisten the area where the stuffing will take place, this will help make the work more accurate.
4. After the holes for the fasteners have been made with a drill, the plumbing is installed. If there are no problems and the location is satisfactory, the toilet is removed and a special sealant is applied along the marked contour. The use of such a product will avoid the formation of water puddles under the toilet. The fastening holes must also be filled with sealants to make the fastening more dense and reliable, as well as to ensure waterproofing of the concrete screed.
5. The plumbing fixtures are being installed along the contour. Then the fasteners are carefully tightened so as not to displace the product. The sealant, which will certainly be squeezed out under the weight of the toilet, must be removed immediately with a spatula.
6. The sealant strip is decorated by grouting.
7. and corrugated pipe, plumbing is connected to the sewer system and cold water supply pipeline.

Method No. 2 – for side placement, fastening to the floor with corner brackets

This method involves installing plumbing fixtures in which the fastening components are hidden. This procedure is more complicated than the previous one, since it should be performed only in accordance with a clear algorithm of actions. The main difference is the location of the sewer drain as close as possible to the toilet.

Instructions for attaching the toilet to the floor:

1. Unlike the previous method, in this option it is recommended to carry out all the pipe laying work first. It is best if this is done before laying tiles as flooring.
2. The plumbing fixtures are installed without fastening; a contour is drawn on the floor and marks are placed showing the points of the fastening elements.
3. The lower component of the toilet (the so-called “hidden mount”) is mounted on the floor. Plumbing fixtures are fixed using corner brackets. The fasteners must be wrapped one at a time, not forgetting to constantly monitor compliance with the contour. This will allow for rigid installation and prevent even minimal movement of the plumbing fixture.
4. The upper component of the product is installed into the already installed lower one, and then securely fixed through the ready-made side holes of the toilet. At the stage of connecting the sewer communication, adjustments can be made.

After complete installation of the product and checking the quality of installation, the elements used for fastening to the floor are closed with special decorative plugs (so that these parts do not stand out from the interior design). The procedure is of medium complexity and requires extreme care and accuracy.

Method number 3 - use sealant

Quite often, electric or water-based “warm floor” systems are installed in bathrooms, so it is impossible to drill separate mounting holes. This can lead to significant disruption of functioning, because There is an increased risk of damage to cables or waterproofing.

In such a situation, the only way out is to use products based on construction adhesive. To attach the toilet to the floor on tiles, the following materials can be used: liquid nails, some silicone mixtures, resins.

Algorithm for installing a toilet on a tiled floor:

1. Place the plumbing fixture and mark the outline of its base on the tile.
2. The surface layer of the tile is carefully cleaned off using a diamond wheel or other similar tool. The resulting roughness will ensure reliable adhesion to the toilet base. A similar procedure is performed with the toilet.
3. At a distance of 3-4 mm from the created contour, a layer of adhesive is applied so that the main part of it is preserved directly under the pedestal. Any substance squeezed out after installation must be immediately removed with a spatula. If this is not done, after hardening the adhesive can only be removed together with the ceramic tiles.

The procedure for attaching components to the toilet, connecting to the sewerage system and water supply

Connections to the water supply also vary in type, depending on the design of the toilet:

• if there is an internal water supply system, a flexible hose or a special copper tube is used for connection. As a rule, when sold, such elements come complete with parts for fastening to the floor, but it is advisable to clarify this point with a consultant separately. Sometimes it happens that the tap thread and the thread on the copper pipe do not match, then an adapter and sealing elements will be required;
• With an external water supply system, the connection is easiest. Typically, no additional parts are required.

Regardless of the method of connection to the water supply, all connections should be coated with special sealants for plumbing fixtures to ensure waterproofing and minimize the risk of leakage.

Common Mistakes

If the technician did not follow the algorithm when installing the toilet on the tile floor, the result may be improper functioning of the plumbing fixture, damaged waterproofing (leaks) and the spread of an unpleasant odor in the room.
Watch the video

Common mistakes when installing on tiles:

1. Uneven position of the toilet - to avoid this, it is important to use a building level at every stage. The absence of the leveling step can lead to a violation of the waterproofing and damage to the plumbing.
2. Insufficient treatment of joints with silicone-based sealants. The product should also be applied to the contour of the corrugation and pedestal of the toilet. The result of this error, most often, is the formation of puddles under the equipment or drain pipe.

1. When renovating a bathroom, sometimes some debris gets into the installed toilet. Before connecting the pipeline, it is important to check all components of the structure to ensure that there are no foreign objects. Otherwise, it may lead to a clogged toilet.
2. Insufficient sealing of the tank valves or their damage can lead to tank leakage after a certain time.

Thus, you can install the toilet on the tile floor yourself. Depending on the design of the model, the appropriate installation method is determined.

After installation, a problem may occur; see common causes and methods for eliminating them.

When carrying out the procedure, it is important to strictly follow the instructions, then the installation will be carried out efficiently. It should be noted that if the apartment owner is not confident in his own abilities, it is better to entrust the installation work to professionals.

Watch the video

Installation of plumbing equipment is carried out in strict accordance with building rules and regulations. Home craftsmen are often afraid of such work. This is used by service companies that charge very decent money for performing fairly simple operations. Meanwhile, attaching the toilet to the floor is a task that can be done independently. It is only important to carefully familiarize yourself with existing work technologies, choose the most suitable one, and strictly follow all instructions.

Regardless of the chosen method of attaching the toilet, installation work begins with assembling the flush cistern. The device is assembled in accordance with the instructions and fixed in the place intended for it. Also, before installing the toilet, the water supply and drainage units must be prepared. There are several methods for attaching devices. The main selection criterion is the floor material on which the equipment will be installed. Let's take a closer look at the most common methods.

Method No. 1: installation on dowels

The most practical method that allows you to install the device with the least amount of effort and time. It is optimal for use on a flat, smooth base, since the slightest differences in height negatively affect the quality of flushing. It is preferable to use this fastening method for lightweight compact structures, since the fixation may not be entirely reliable. Plumbers advise installing the equipment on a special gasket, which you can easily make yourself from old linoleum or a sheet of thin rubber. The toilet bowl is installed on the workpiece and traced along the contour with a marker. After which, using a sharp knife or simply scissors, the gasket of the desired shape is cut out.

The device is fixed to the floor using dowels or special plumbing fasteners. Fasteners are usually included with new equipment. It can also be purchased in specialized stores

Now you need to mark. We “try on” the toilet in the place prepared for the equipment and trace it along the contour. We remove the device. Apply a thin layer of sealant and glue the gasket onto it. This design will be the most reliable, although some craftsmen prefer to do without a substrate at all. You can start drilling holes for fasteners. As practice shows, if you glue the gasket well and choose the diameter of the drill so that the holes for the fasteners are slightly larger than it, then further installation will be much easier. This is due to the fact that the rubber backing acts as a kind of “contact spot” for the floor and the device.

It happens that you need to not only fix the toilet to the floor, but also raise it a little. This is relevant if there are several devices in the apartment. Then the last one in the system needs to be raised by about 3-4 cm. In this case, use a piece of a two-inch board, which is used as a stand. It is cut exactly along the contour of the toilet and laid on the floor, with a rubber backing placed on top of it. All this is held together with sealant and forms a reliable and durable structure. We drill holes for fastenings directly along the gasket.

You must tighten the fastening on the base of the toilet very carefully. Excessive force may damage the ceramic material from which the device is made.

Long metal dowels or special plumbing fasteners can be used as fastenings. The latter usually come complete with new equipment. The quality of fastening is approximately the same, so both options can be used. We hammer the dowels into the holes prepared in the floor. We install the toilet and carefully screw it on. It must be remembered that if over-tightened, the ceramic from which the device is made may be damaged.

Now you need to connect the device to the sewer. At this stage we pay special attention to the corrugation. Generously lubricate both edges with silicone. We insert one of them into the sewer socket, and put the second one on the toilet outlet. All areas of the connection should be carefully pressed with your fingers to ensure a good seal. As an additional measure, you can use metallized tape to seal the joints. We connect the water supply and the device is ready for use. There is a similar fastening method, which is presented in detail in the video.

Method No. 2: glue installation

Of all the methods for fixing a toilet to the floor, this is the simplest, but at the same time the most time-consuming. It takes about 12-15 hours for the epoxy mixture, which is used as glue, to harden. This method can only be used on a smooth surface. It is most often used to secure equipment to floor tiles. The method is very simple to implement. First, both surfaces to be glued must be thoroughly cleaned of dust and debris. Floor tiles can be sanded down to make them rougher. This will improve the adhesion of the material. Surfaces are degreased with any solvent or acetone.

Prepare the glue. You can buy a ready-made epoxy compound or prepare it yourself. To do this, you need to take 100 parts of ED-6 epoxy resin, 200 parts of cement, 20 parts of solvent or plasticizer and 35 parts of hardener. The sequence of adding components to the solution is important. First, the resin is heated to 50C, a solvent is added to it, then a hardener and, at the very end, cement. The composition must be constantly stirred to form a plastic, homogeneous mass.

To ensure that the toilet is securely fixed in place, the floor covering is prepared: it is cleaned for better adhesion and coated with a small layer of glue. Excess composition released under the weight of the equipment is immediately removed with a damp cloth.

A properly prepared adhesive mixture can be used within one and a half hours. We apply it to the base of the toilet so that the solution covers an area of ​​at least 20 square meters. cm, and the layer thickness was at least 4 mm. We install the prepared equipment in the right place, aligning the sewer socket with the outlet, and forcefully press it to the floor. After which we leave the device for at least 12 hours. This period is necessary for the adhesive to harden. During this time, it is not recommended to even touch the toilet. Then we connect the equipment to the water supply and sewerage.

Method No. 3: fastening with taffeta

This method is most often used to install toilets on wood floors. Taffeta is a pad of durable wood to which the equipment is attached. The thickness of the board from which the element corresponding to the shape of the toilet support column is cut should be 28-32 mm. To protect the part from dampness, it must be carefully treated with drying oil. To securely fasten it to the floor, anchors are installed at the bottom of the taffeta. The simplest option is nails driven in in a checkerboard pattern, which should protrude 2-3 cm from the part. The recess prepared for installing the toilet is filled with cement mortar. Taffeta is sunk into it with anchors. As a result, it should be flush with the floor.

After approximately 12 hours, during which the solution completely dries, you can begin attaching the equipment. The device is fixed with screws. Rubber washers must be placed under their heads, which will prevent possible damage to the toilet frame when tightened. Experts advise lubricating the screws with grease or graphite before work so that later, if necessary, they can be easily unscrewed. Wood taffeta can be replaced with a rubber backing. It is cut out of sheet material with a thickness of 5 to 15 mm, perhaps even from an old rubber mat. Such a substrate should be 1-2 cm smaller than the toilet support stand.

Fastening the toilet to taffeta involves the use of a special wooden insert. The diagram shows all the elements of such fastening

The methods for attaching a standard toilet to the floor are varied. They differ significantly in complexity and time spent on installation work. It is important to choose the right fastening method. It depends on the material from which the floor in the room is made. You can carry out the installation work yourself, but if you have no experience or desire, it is better to turn to professionals. They will quickly and competently carry out all the work, guaranteeing long and flawless service of the new equipment.

According to current SNiP, installation of plumbing equipment (including a toilet) is carried out in compliance with certain rules, which guarantees a long service life. Many companies provide installation services, but you can carry out this operation yourself and save a decent amount.

Before we figure out how to attach a toilet to the floor, let’s get acquainted with their known types and find out their design features.

Toilets differ in the following characteristics:

• device of the tank and drain bowl, method of their articulation;
• direction of sewage flow (direct or lateral);
• the material from which the toilet is made;
• dimensions and total weight.

When considering the installation of toilets of this class, the main attention is paid to the first point (that is, design differences).

Reliable fastening of the toilet to the floor can be achieved if its design features are taken into account.

These plumbing samples come in two types:

• models with a tank that is mounted on the ledge of the bowl on the back side
  (in this case, the water storage tank is adjacent directly to the toilet wall);

• monoblocks, in which the bowl and drain tank are made as one module, do not
  having detachable parts.

The advantage of the combined version or monoblock is the ease of maintenance of the toilet, including its repair. To this should be added the relatively low noise level of the flushing procedure compared to a standard separate design.

The disadvantages of this class of plumbing fixtures include a noticeable reduction
pressure of the drain mass.

Let's figure out how to attach the toilet to the floor in the toilet.

There are three methods:

1. installation on dowels (bolts),
2. on glue
3. taffeta fixation.

Let's look at each of these toilet mounting methods in more detail.

Installation using dowels (bolts)

This method is the most practical and does not require large expenses. He also
provides a secure attachment for the toilet, provided that the floor screed
pre-prepared for installation.

Small irregularities do not impair the tightness of the installation, since in this case an elastic gasket can be used.

Fastening the toilet to the floor with bolts is suitable for both conventional structures and
lightweight, compact, that is, this option can be considered universal.

Bolts for attaching the toilet to the floor allow you to obtain a tight connection,
if a sealing gasket cut from a piece of linoleum is used
or elastic rubber.

These blanks are placed under it, and then outlined along the contour with a marker. Immediately after this, a sealing element corresponding in shape to the supporting part of the product is cut out with a sharp knife (sometimes scissors are used for this).

Before fixing the toilet to the floor, markings are made on the surface of the screed
specifically for dowels, into which hardware is then “driven”. The latter are usually included
included in the kit of the mounted device. If they are not available, special bolts for
Mounting the toilet to the floor can be purchased at a hardware store.

The order of further operations looks like this:

• First, the purchased toilet is placed on the already prepared place for fitting, and
  then traced along the contour with the same marker.
• Then the toilet is removed, and the marked area is coated with a sealing compound,
  onto which the previously prepared gasket is glued.
  Additional information: in some cases it is possible to do without compaction, but for this, the surface of the floor in the toilet must first be well leveled.
• Before attaching the toilet to the prepared surface, you need to
  prepare holes for metal dowels, for which a drill with
  with a diameter slightly larger than the size of the hardware.
• Then the same holes are made at pre-marked points
  glued gasket.
• Now you can hammer the dowels into them and carefully install them on the gasket
  toilet for subsequent fixation.
• The bolts for attaching the toilet to the floor should be screwed in very carefully, without
  force, being careful not to damage the ceramics.

Violation of this rule when handling tools and hardware can lead to
the appearance of cracks or chips at fastening points.

This is unacceptable - the cup will then become unusable. After securing, they proceed to connecting to the sewer, paying special attention to connecting the corrugation of the drain channel.

To form a tight connection, its ends are generously lubricated with silicone,
one of them is inserted into the socket of the sewer outlet, and the second is put on
release neck. During installation, the joints are carefully pressed together with your palms,
which will allow the sealed composition to quickly absorb into the corrugation material and form
reliable contact.

To obtain a tight connection, the toilet drain area can be additionally sealed with metallized tape.

After all these operations are completed, it is time to connect the water supply
outlet, and the plumbing fixture is completely ready for use.

Fixation with glue

A reliable mount for the toilet bowl can also be created using an adhesive composition,
purchased ready-made or prepared with your own hands.

This method is considered the simplest, but at the same time, fastening without bolts will require a lot of time (it takes 12–15 hours for the adhesive epoxy mixture to completely harden).

Another condition for obtaining reliable fastening is as follows. Before as
glue the toilet to the floor, you will need to carefully level the surface of the screed or
cover it with thick floor tiles.

When figuring out how to glue a toilet to the floor or tile, preference is usually given to special epoxy resins prepared according to the instructions included with the composition.

The method of attaching a plumbing product to an adhesive composition is simple, for this
You will need to do the following preparatory operations:

• First, the working surfaces are cleaned of dust and remaining dirt.

Before gluing the toilet to the tile, it is advisable to give it a small
roughness, for which you can use coarse sandpaper - this technique helps improve the adhesion of the surfaces to be bonded.

• Next, they are degreased using a solvent or ordinary acetone, then
  You can proceed to preparing the glue. You can buy it in the store ready-made
  or cook it yourself.

To do this you will need: 100 parts of ED-6 resin, 200 parts of high-grade cement, 20 parts of solvent and 35 parts of hardener.

When preparing the adhesive composition, the sequence of actions is important, determining
the order in which individual components are added to it.

First of all, you should heat the resin to 50 degrees and add solvent to the thick solution. This is followed by the addition of a hardener and at the very end of the procedure cement is placed there. In the process of adding components, the mixture must be continuously stirred, resulting in a homogeneous and thick plastic mass.

For better fixation of a plumbing fixture on a screed or tile surface
pre-clean and lubricate with a not very thick layer of prepared adhesive
mixtures.

Upon completion of installation, excess epoxy composition up to 4 mm thick, squeezed out by the weight of the device, is immediately removed with a damp cloth.

It is advisable to use the mixture prepared for installation within one and a half hours. Otherwise, it will harden and become unusable.

When installing the toilet, you should carefully ensure that its socket is located exactly opposite the sewer drain hole. If this is not observed, you need to forcefully press the base to the floor.

Upon completion of these operations, the device is left for approximately 12 hours, necessary for the final hardening of the adhesive composition. After the specified time has passed, you can proceed to connecting it to the water supply and sewerage system.

Taffeta fastening

When choosing fasteners for a toilet to the floor, take into account the possibility of installing it on a wooden floor, which is usually required in private buildings. In this case, you will need a special gasket made from durable wood (called taffeta).

To make it, take a board 28–30 cm thick, corresponding in size
the shape of a toilet support stand. In order to protect its surface from moisture and destruction
covered with a layer of drying oil.

For high-quality finishing of a bathroom or toilet room, it is necessary to dismantle all extraneous elements that interfere with the finishing. It is worth understanding that dismantling plumbing fixtures is mandatory not only for convenience, but also in order to preserve their integrity. After completing the repair work, the question arises: how to install a toilet on tiles?

In contact with

Classmates

Getting ready to install the toilet

There are several methods for installing a toilet on ceramic tiles. But for any of them you will need the same installation tools and materials. To successfully complete the installation procedure, you also need to have some tools available:

• pencil - used for marking;
• screwdriver - it is advisable to have a set of screwdrivers;
• rubber;
• hammer;
• special drills of two types: designed for drilling glass and concrete;
• you also need a tool for drilling - simple or sophisticated - it doesn’t matter;
• punch - a tool used to mark holes for a drill;
• adjustable wrench.

If you have the necessary tools, then the only thing left is the materials:

• Naturally, the installation object itself is needed - the toilet;
• means connecting plumbing fixtures to sewerage and water supply systems:
  • corrugated or fan pipe;
  • flexible hose or copper tube;
  • tap for opening/closing water supply;
• any sealant to ensure the tightness of threaded joints;
• sealant;
• dowels

Installing a toilet on a tile can be done using a hidden method or an open method. The difference is in the placement of the fastening means: inside the base and outside, respectively.

How to fix a toilet using the open method?

First of all, you need to mark with a pencil the location of the future location of the toilet. How to do it? We “try on” the toilet in the intended place, then mark the attachment points with a simple pencil, and also outline the base of the toilet. What errors can be made when working with a pencil? The displacement of the markings will affect the holes you actually made, which threatens to not coincide with the mounting grooves.

The next step is to remove the toilet from the working plane for a few minutes and drill holes according to the marks you made.

We will install the toilet on the tile a little later, but now we will take a center punch and use it to scrape off a little of the tile glaze along the fastener mark.

Note!

If this is not done, the drill will slide along the tiles, which will lead to damage to the floor covering.

Next, we should have a glass drill in our hands, which can easily overcome fairly massive ceramic tiles, although not without the help of a hammer drill or drill. After the resistance of the tile has been suppressed, our drill will rest against a structure that is insurmountable for it - concrete. This is where a drill designed for concrete comes into play, with which you need to drill a hole the entire length of the purchased dowel.

After clearing the hole of foreign objects, fill it with sealant, which acts as an insulation against water, and insert it.

Now it's time to fix the toilet to the tile, but before that, run the sealant along the pencil marks. What is it for? The sealant is an excellent barrier to moisture accumulation. Then we install the toilet and secure it with fasteners.

Drill the tiles carefully

Installation of a toilet using a closed method

Before starting the toilet installation procedure, it is necessary to make outlet holes that will lead to the sewer system, as well as from the water supply. Position the holes as close as possible to the plumbing fixture being installed.

All steps are similar to the previous method. The whole difference lies in the secrecy of the fastening elements. They won't be noticeable here. We string the toilet onto the fasteners and secure it with bolts through the side holes.

The decision on how to attach the toilet to the tile is yours. But no matter which method you choose, experts advise not to tighten the bolts too tightly, as adjustments may be required when connecting to sewer and water systems.

Carefully scrape off any excess sealant that has come out with a spatula.

The toilet has a heated floor. What to do?

Today, the “warm floor” system is quite common not only in toilets and bathrooms, but throughout the house. As you can already understand, if such a system exists, then you cannot drill the tiles. Why? Because the heating system will be damaged and stop functioning.

But don't despair - there is a way out. Since you can't drill, you'll have to glue it. Only a couple of questions remain: with what and how?

Regardless of the adhesive material, the toilet and tiles must be treated with sandpaper. With light hand movements we add a slight roughness to the lower plane of the sanitary element and the tile. This is a mandatory action, since when they are performed, the best contact between the floor and the toilet is observed.

Epoxy resin, silicone glue or liquid nails can be used as an adhesive material.

The mounting hole should be small

Setting up water supply

Connection to the water supply is carried out in two ways: closed and open.

The closed method is also more aesthetically pleasing than the open method. In order to connect the toilet to the water supply, we need a flexible hose or copper pipe.

Note!

A copper tube usually comes with the toilet, but it is rigid, which makes it impossible to change the position.

But a flexible hose is flexible - you can change the position and not depend much on the position of the device.

The water pipe requires special concentration of your attention. If the pipe thread is internal, you will need to provide the system with an additional adapter, which should be insulated with the seal to avoid leakage.

The final stage is to check for leaks on all fronts. By opening the water tap, waiting for water to fill the barrel, and flushing, you can find places through which water is leaking. If there is no leak, then you can tighten the bolts that secure the toilet to the tile until they stop.

We provide access to the sewer

When the installation of the toilet on the tile is completed, the stage of giving the device life begins - connecting to the sewer and water supply systems. After all, without them, the toilet cannot perform its functions.

To connect the toilet to the sewer, we need corrugation. The good thing about corrugation is that it allows you to change the distance of the toilet from the outlet, as well as change the angle of inclination. Inside it is a rubberized membrane that fits snugly both to the toilet outlet and to the sewer outlet. Carefully connect the toilet to the sewer using.

After the manipulations have been completed, you can begin installation, which in turn will be connected to the water supply. Use silicone or plastic washers to prevent the bolts from coming into contact with the toilet faience.

How to attach a toilet to tiles video:

In contact with

See inaccuracies, incomplete or incorrect information? Do you know how to make an article better?

Would you like to suggest photos on the topic for publication?

Please help us make the site better! Leave a message and your contacts in the comments - we will contact you and together we will make the publication better!

Modern technologies for the manufacture of plumbing fixtures make it possible to fill the building materials market with a variety of toilet models.

Sanitary fixtures differ in modifications of the flush tanks, materials of manufacture (porcelain, earthenware), fastening devices, location of the water supply and drain outlet. In most cases, bathrooms and toilet rooms are tiled.

Walls and floors are covered with tiles. How to fix a toilet on a tiled floor so that it stands firmly on its base? In this article we will give the reader information on how best to do this.

Preparatory work before installing the toilet

Find a comfortable toilet pipe length

The drain sink is installed when the work on tiling the walls and floors with ceramic tiles is completed.

If you install the plumbing first, and then start installing the ceramic floor covering, you will have to deal with rather complex cutting in the slabs to contour the base of the pedestal of the plumbing fixture.

This will cause a risk of damage to the cladding if the selection of cut tiles is unsuccessful.

When covering walls and floors with ceramic tiles, you need to achieve a convenient length for the protrusion of the water pipe from the wall.

The outlet of the water pipe must be such that a shut-off valve can be installed.

The sewer drain can protrude from both the wall and the floor. The sewer socket must provide a tight connection with the corrugation.

Required tools and materials

To successfully complete the task, you should have patience and prepare the following set of tools:

• perforator, drill;
• marker;
• drills for glass and ceramics;
• screwdrivers;
• sealant;
• spanners;
• adjustable wrench and sockets with collar;
• dowels with self-tapping screws;
• pliers;
• corrugated pipe;
• tap;
• core;
• grinder with abrasive wheel;
• connecting hose.

Related article: Beige color in the interior: choosing the appropriate shade and learning to combine with other colors (40 photos)

Installing a toilet on a tiled floor

Toilet installation

Installing a toilet on a tiled floor can be done in different ways, depending on the position of the mounting holes in the sink pedestal.

There are three options for attaching a plumbing fixture to a ceramic floor covering:

Installation of a toilet with vertical mounting

Most drain sink models are made with mounting holes for vertical fasteners. Installation of the sink is carried out in several stages:

Before installing the toilet, check the horizontal position of the installation site. If no deviations are identified, then the base of the pedestal and the tiles along the contour of the sink support are not cleaned.

Lateral fixation of the toilet

Installing a toilet with side mounting holes is somewhat different from installing a sink with vertical fasteners.

The difference is that the mounting parts are hidden under the pedestal of the device.

Install this model of the device as follows:

Gluing the toilet base

This installation method is used if the base of the floor is equipped with a heating system. There is a risk of damage to heating equipment when drilling mounting holes. For more information about the work, watch this video:

In this case, cleaning the base of the pedestal and the surface of the ceramic tiles along the contour of the toilet support is mandatory. This is done to increase the adhesion of the bonded surfaces.

Press the toilet firmly to the floor

Glue the toilet to the tiled surface with liquid nails. The surfaces are covered with glue, then they are pressed against each other.

The toilet is removed from the installation site and placed on its side. Maintain the time specified in the instructions. Then set the sink in place and press it to the floor.

The remaining installation work is performed in the same way as in previous cases.

You can begin installing a toilet on a tiled floor yourself only if you have the skills and experience in this type of work.