Gas convector gwh. Gas convectors Emax GWH. Gas convector TMT GWH

We invite you to consider Hungarian gas convectors (heaters) Em@x series GWH

The use of such heaters makes it possible not to depend on central system heating, and they are often the only option for organizing heating in cases where installing a boiler is impossible for some reason.

Gas convector designed for wall installation, used in various premises. For its operation, both natural and bottled gas can be used. Modern manufacturers offer models with different power ratings, the choice of which will depend, first of all, on the size of the room. Emax heaters can be effectively used for heating rooms whose area ranges from 15 to 100 square meters. m.

Features and advantages of Emax convectors:

• Cost-effectiveness of convectors due to high efficiency and modern system automation providing automatic control room temperature
• Electrically independent
• Operational safety
• Convenient regulator that allows you to set required temperature indoors from 13 to 38 degrees.
• The heat exchanger is made of high quality enameled steel
• Telescopic coaxial pipe chimney included in the delivery kit of the convector
• Italian gas fittings SIT, which guarantees reliability and long term operation
• The EUROSIT 630 gas valve allows the heater to be used with both natural and liquefied gas. The kit for converting to another gas is purchased separately.
• Possibility to increase the room temperature to required level
• Factory warranty - 2 years

The lineup heaters Em@x GWH and prices:

To install the convector, as a rule, one of the external walls is selected. The device is mounted at a height of 10-15 cm from the floor. Installation of the convector involves making a special hole in the wall through which a double, or coaxial, pipe will be discharged. It is included with the device. Similar design allows you to isolate the combustion process. Outside air, which is necessary for combustion, enters through one pipe, and combustion products are discharged outside the room through another. As a result, the safety of using the convector is ensured. To organize the heat exchange process, a heat exchanger is provided, which is located in the second circuit of the device. Various options convector designs assume that convection can occur naturally or forcefully. In the second case, a fan is used to organize air circulation. The room temperature is quickly set at a given level, and it is maintained automatically.

Modern gas convectors, being independent heating devices, can serve as a replacement for conventional heating systems. Since these devices do not have a water circuit, their operation does not involve the risk of freezing. Convectors are easy to install and dismantle, provide fast air heating, and are safe to use. It is not surprising that today many consumers decide to buy a gas convector.

16900 RUR/piece
Download price

Manufacturer: WAMSLER S.E. Hungary

Calculations, prices from 2012.

Today, when most of us began to take into account our funds, trying to find a solution to any issue as cheaply as possible, devices have appeared with which the technology of heating a room and obtaining heat does not require the creation of boiler houses and piping of a water heating system, no connection to the electrical network is required, and with all this, be it a country house or a dacha, a bathhouse, a sales tent and pavilion, a garage, warehouse space or a gas filling station, office, cultural center or production facility, the oxygen that we all need so much does not burn out in the room, and it is possible to regulate the temperature in each room or room. All that is needed is the presence of gas, natural (mains), or liquefied (cylinder) and the device itself.
What is a “gas convector”?
Externally, gas heating systems are similar to water heating systems. They are also installed on external walls of premises, usually under windows.
Almost any adult can independently install a convector and prepare it for startup. The entire installation boils down to making a hole in the wall and the sequence of actions outlined in the Installation Guide. The locations for the holes are marked according to a template, which serves as back wall convector on which everything else is mounted: assembled with a gas burner block (where preparation takes place gas-air mixture and its combustion), a system of 2 pipes “pipe in pipe” and a decorative grille.
You can install one or more gas convectors in your house, depending on the number of rooms in which you need to create comfortable conditions for living, working or storage. Convectors are mounted permanently on the wall of a heated room.

Let us first consider the heating option from a liquefied gas cylinder, as the most autonomous, fairly inexpensive and quick option(in terms of installation, connection and obtaining much-needed heat).
For normal year-round heating of a room with an area of ​​up to 20 m2, you will need a convector with a power of 2.5 kW (a gas convector with a power of 5.5 kW is capable of heating rooms up to 45-50 m2). If heating is not provided in winter period, and the convector will “rest” - less power is enough for 1 m2.
In addition to gas convectors, you will also need: a cylinder for liquefied gas with a valve, a reducer, for gas distribution (pipes or hoses, a pair of fittings, elbows and adapters), and possibly a place for storing cylinders.
pressure at outside temperature up to -30°Household liquefied gas cylinders are produced in volumes of 5, 12, 27 and 50 liters. For a sufficiently long heating period or, in the case of installing several gas convectors, it is most advisable to use 50-liter cylinders. These cylinders are always equipped with a valve. The remaining standard sizes of cylinders are produced either with a built-in valve device for a pressure regulator, the so-called “frog”, or with a valve that requires threaded connection with gearbox. From the point of view of safety and operational reliability, it is better to purchase cylinders with a valve and a threaded reducer RDSG 1-1.2. When heating in winter with the cylinder placed outside, it is recommended to use imported gearboxes, the quality of which has been tested in practice - guaranteed reliable operation in the required C range.
Cylinders can be installed inside the house in the kitchen, pantry, or on the terrace. However, from the point of view of safety, air purity and liberation useful areas, it makes sense to install cylinders with a capacity of 50 liters in special metal cabinets made of non-combustible materials(or protective cover) y outer wall Houses. However, no more than 2 cylinders of 27 liters each can be installed in the room (according to the standards). every. The placement of cylinders inside residential buildings with more than 2 floors is also not allowed according to existing regulations, the updating of which has just begun.
It is recommended to distribute gas from the cylinder to the convectors steel pipes. The pipe from the cylinder to the convector must be completely curved without corners or other threaded connections. In places where the pipe branches, the connection is made by welding.

IN last years internal gas pipelines made of special reinforced plastic pipe or copper. But in regulatory documents(SNiPakh, Gosgortekhnadzor Rules) these innovations have not yet been reflected. It is allowed to connect the pipe to the gas convector using a flexible special gas hose. In this case, a tap must be installed between the pipe and the hose.
After installation and checking by simply soaping the tightness of all gas joints, we start the convector. To do this, you don’t need to run to the store for matches, but just press 2 keys on the front panel of the convector, one of which opens the gas supply, and the second - piezo ignition. Turning the knob with numbers next to the keys is also simple, thus setting the desired temperature for further automatic maintenance.

How much will it cost you to install and operate gas convectors, for example using liquefied gas?
Consider the following two options for a summer residence:
- one 2.5 kW convector with a 50-liter cylinder placed on the terrace is installed in the house;
- two convectors are installed in the house - one with a power of 2.5 kW, the second - 3.5 kW with a 50 liter cylinder installed in a cabinet outside the house.

In the first case, you will have approximately the following costs:
1. Equipment and materials:
Gas convector GWH2 with a coaxial set of pipes - 12,500 rubles;
50 l cylinder with valve - 1700 rubles;
Reducer RDSG 1-1.2 - 120 rubles;
Steel pipe? inches (8 meters) - 300 rubles;
Flexible eyeliner(50 cm) - 70 rubles;
Gas ball valve - 70 rubles;

TOTAL materials: 14,760 rubles.

2. Installation and commissioning:
Installation and configuration of the convector - 1800 rubles;
Installation of gas distribution - 2000 rubles;
Fare- 300 rubles.
________________________________________________________________
TOTAL: 18860 rubles
In the second case, the costs will be approximately 32,460 rubles.
Refilling a 50-liter cylinder costs 450...480 rubles.

The consumption of liquefied gas when operating a 2.5 kW convector in maximum heating mode is 0.19 kg/hour (0.26 m3/hour for natural gas). Thus, a 50 liter cylinder provides 150 hours continuous operation on full power. Taking into account the inclusion of heating in spring and autumn periods and warming up in economy mode on cool summer nights, a 50-liter cylinder is enough for one 2.5 kW convector for one season (May-September).
Everything that has been said also applies to convectors powered from the main (mains) gas, which is supplied to gas stoves in the kitchens. The fundamental difference is that the installation and wiring of the internal gas network should be carried out only by certified specialists who have the necessary qualifications and experience working with this type heating equipment, the need to “tinker” with cylinders, and, of course, the cost. So, for example, with the current tariff for natural gas about 2 rubles per cubic meter, a 2.5 kW convector consumes, on average, 350...450 m3 of gas per year (at constant winter accommodation), which costs 700...900 rubles per year.

Convectors can be quickly and easily dismantled within 10 minutes, which is very important in our conditions, for example, when storing them for the winter. To dismantle the convector, you only need to unscrew the threaded connection to the gas pipeline, unscrew the two mounting bolts and unscrew 3 M6. Re-installation of the convector does not require the involvement of specialists and takes the same 10 minutes!
Convectors do not have a water circuit, so there is no problem of coolant freezing and damage to the heating system.
Gas convectors have the ability, in the shortest possible time after switching on, to raise the temperature in the room to the required level and maintain it automatically, without human intervention.
Convectors do not require power supply.

Convectors are very economical due to their high efficiency and modern automation system, which provides automatic control of room temperature.
Convectors are safe thanks to high quality protective automation.
Environmental cleanliness is another remarkable property of gas convectors. Convectors have closed chamber combustion not associated with the heated room. Combustion air comes from the street, and combustion products are discharged there.
In conclusion, we note that gas convectors are not a panacea for heat shortages.
If your home already has a double-circuit gas boiler installed, which also provides hot water, then the use of gas convectors will be effective for heating new extensions, such as: attic, covered terrace, garage, etc. During the initial engineering arrangement of a house, in some cases a combination may be of interest electric water heater and based on gas convectors. If you only have the task of heating your home, then gas convectors are the most economical and comfortable solution. At minimum, compared to classical systems gas heating with a water circuit, with initial costs, gas convectors will allow you to maintain an individually set temperature in each room and ensure economical gas consumption.
But still, it is better to decide on home heating by first obtaining specialist advice.
Prices as of 05/01/2015
Designation GWH2a (PB) auto GWH2 GWH3 GWH4 GWH5
Rated power, kW 1.95 2.5 3.5 4.7 5.0-5.8*
Heated area up to, m2 18 22.5 29.8 38 40
Gas consumption: natural, m3/h 0.26 0.36 0.49 0.59
liquefied, kg/h 0.154 0.197 0.28 0.371 0.458
Efficiency, % 85 80 85 85 86
Weight, kg 11 20 26.5 29 33
Height, mm 500 500 500 500 500
Length, mm 410 400 600 700 800
Width, mm 130 220 220 220 220
Price, rub. with VAT 16900 17970 18400 19800

Model

Thermal power kW

Heated area m 2

Air flow m 3 / h

Gas consumption

Email power W

Dimensions LxWxH mm

Weight kg

Appearance

natural m 3 / h

liquefied kg/h

GAS CONVECTORS Emax

GAS CONVECTORS “ROBUR” (Not supplied to Russia)

Currently, when solving space heating issues in the winter, many consumers prefer this option: gas heating convectors. The use of such devices allows you to not depend on the central heating system, and they are often the only option for organizing heating in cases where installing a boiler is impossible for some reason.

Gas convector, designed for wall installation, is used in various premises. For its operation, both natural and bottled gas can be used. Modern manufacturers offer models with different power ratings, the choice of which will depend, first of all, on the size of the room. Convectors can be effectively used for heating rooms whose area ranges from 15 to 70 square meters. m.

To install the convector, as a rule, one of the external walls is selected. The device is mounted at a height of 10-15 cm from the floor. Installation of the convector involves making a special hole in the wall through which a double, or coaxial, pipe will be discharged. It is included with the device. This design allows the combustion process to be isolated. Outside air, which is necessary for combustion, enters through one pipe, and combustion products are discharged outside the room through another. As a result, the safety of using the convector is ensured. To organize the heat exchange process, a heat exchanger is provided, which is located in the second circuit of the device. Various design options for convectors suggest that convection can occur naturally or forcefully. In the second case, a fan is used to organize air circulation. The room temperature is quickly set at a given level, and it is maintained automatically.

Modern gas convectors, being independent heating devices, can serve as a replacement for conventional heating systems. Since these devices do not have a water circuit, their operation does not involve the risk of freezing. Convectors are easy to install and dismantle, provide fast air heating, and are safe to use. No wonder that buy a gas convector many consumers decide today.