DIY wall key holder: design options, master class. Wall-mounted key holder - stylish highlights and beautiful do-it-yourself models (102 photos) Do-it-yourself key holder painting

23.06.2020

With the help of the correct implementation of the appropriate project, you can ensure convenient storage of important things and. A high-quality wall-mounted key holder with your own hands will be made quickly and at no extra cost after reading the materials in this article. There are general thematic data and photos of particularly successful solutions. Some production technologies are described in detail. Therefore, anyone can reproduce them accurately even without previous experience in performing similar work operations.

To formulate a list of requirements for this design, it is necessary to make several clarifications regarding the intended purpose:

A decorative wall key holder is installed in the entrance area, in a visible place. Its aesthetic characteristics should.
The direct loads from the keys themselves are not great. However, with intensive use it is difficult to count on very careful handling. Possible mechanical influences should be taken into account.
The resistance of decorative coatings to changes in humidity and temperature is useful. The differences in these parameters are especially large in the hallways of private houses.
It is necessary to ensure good visibility of all objects. If necessary, install.
In some cases, it is necessary to equip the structure with closing doors.

Taking into account the features noted above, various traditional solutions can be considered.

One glance is enough to check that objects are in their place. An additional advantage of this design is its simplicity. Decorative design is chosen individually. But a base with several hooks can be created in just a few tens of minutes. Of course, you will have to provide a suitable fixation system on the wall. But this problem is not difficult to solve using ordinary screws with dowels, or other standard ones.

They provide some protection against theft during visits by courier service workers and other strangers. For a good view, a glass insert is installed in the door. If necessary - inside

This modification rationally uses the free space inside the door. A mechanism was installed there that performs decorative and practical functions at the same time.

For your information! A project like this is not too difficult to implement on your own. You just need to purchase a watch that matches the size of the product. It is better to choose an electromechanical or electronic model to reduce the operating load on users.

It must be remembered that such accessories should not interfere with free movement. To store a large number of keys, you can use the internal volume, or open shelves.

It’s not difficult to make a wall-mounted wooden key holder at home

One of the main advantages of this material is its ease of processing. You can make a beautiful and functional key holder from wood with your own hands using simple carpentry. Chisels are also used to give the desired size and shape. An ideal flat surface is created using a plane and sandpaper. Interesting natural cut lines are preserved using clear varnish. If necessary, decoupage or other decorative coating techniques will be used.

In the example in the photo, you will need to find a birch log of suitable size. After cutting and cleaning the ends, hooks are screwed in from below. This completes the manufacturing process of the device.

This product is a fitting illustration of the shortcomings of simple solutions and the material itself:

The primitive appearance imposes significant restrictions on matching the interiors.
Without treatment, the log will become a source of pollution.
If you do not treat the product with a deep primer, the structure will be quickly damaged by changes in humidity and temperature.

It’s not difficult to buy a wall-mounted wooden key holder in a store. But it’s much more pleasant to create the desired product yourself. If the plans are implemented correctly, it will become a source of pride that will be shown to guests.

This example shows that the key holder, with appropriate equipment, can be used to store jars and smartphones, gloves and other small items.

Reliability and durability of metal wall key holders

Metal products are highly durable. They retain their functional characteristics over many years of use in excellent condition. Using special technologies, these materials are used to create parts of complex shapes. The only drawback is destruction by corrosive chemical reactions. To eliminate such negative manifestations, various types of decorative and protective coatings are used.

Metal is more difficult to process than wood. To manufacture some products, you will have to master welding, casting, and other complex technologies. You will have to equip your home workshop accordingly. Even without a thorough analysis, it is clear that the total investment will be significant.

What's good about making a plywood key holder with your own hands?

This material is better for the following reasons compared to the options discussed above:

Plywood is created in factory conditions, so the thickness and other characteristics are precisely known.
If you purchase a moisture-resistant variety, you can prevent damage from appropriate external influences.
The outer surfaces, even without treatment, are quite smooth. They are well suited for applying images using various techniques.
Unlike metal, plywood is not difficult to process.
Even large products made from it weigh little.

Important! When using plywood, take into account the relatively low hardness of the material. The attachment points of hooks and other additional parts may become loose over time. We must also not forget about the limited resistance of wood to moisture and microorganisms. To protect against them, special impregnations are used.

Quick creation of key holders from cardboard with your own hands

These pictures explain the algorithm for creating a functional . You will need to first compile a list of necessary components. To avoid mistakes, you should prepare the project in advance. It is enough to make a sketch by hand with dimensions and other design parameters. You should also choose and master the application of beautiful, long-lasting images in advance.

This material itself is inexpensive, but you will have to take into account the additional costs of production technologies. We must not forget about the limited resistance of cardboard to mechanical loads and high humidity

In this photo of a do-it-yourself wall-mounted key holder, only a container for small items was made from a box. Durable base and decorative overlays are made of plywood. Metal hooks with the desired aesthetic characteristics were purchased at the store.

Examples from other materials

These examples clearly demonstrate the wide possibilities when using different materials. Quite often, craftsmen use combined designs. When preparing the appropriate project, you should pay attention to the following general recommendations:

The power frame is calculated taking into account real future loads.
The dimensions are selected so as to eliminate obstacles to the free movement of people.
All parts of the product must be designed for the appropriate operating conditions. If necessary, they are protected from adverse external influences.
In any case, it is necessary to consider the entire complex of works. Some complex components (hooks, locks) can be purchased in a retail chain, or ordered from a specialized workshop.

DIY key holder: master class and useful recommendations

Before making a pocket key holder with your own hands, you need to decide on the method of securing objects inside it.

In this example, you can look at some of the components:

button for fixing in the closed state;
You can use a carabiner to attach this useful accessory to your belt;
rivet;
device with rotating elements for keys;
linings that prevent edge wear.

For manufacturing you will need not only leather and the special metal fittings listed above. Drawing the workpiece and cutting will not cause significant difficulties. However, quality seam.

To make a wall-mounted key holder from wood yourself, you don’t need to purchase expensive specialized equipment. A suitable blank could be a completely free piece of driftwood of a special shape, found while walking through the forest. When purchasing a small board or plywood from a hardware store, you will not need significant expenses. You can also purchase standard fasteners, hooks, varnishes and paints there.

The following description will help you create such a key holder for the hallway with your own hands without errors:

After specifying the dimensions, you need to buy plywood (up to 10 mm), rings with key chains.
Make life-size drawings of individual parts. With its help, templates for the lower and upper parts and key rings are cut out of thick paper.
They are applied to a sheet of plywood and outlined with a pencil.
Cutouts are made along the marked lines using a jigsaw.
Surfaces are sanded with sandpaper. Drill holes in the key rings for subsequent installation of the rings.
The “house” and the base are fastened using PVA wood glue.
“Hearts” and other decorations can be applied using burning tools.
The products are varnished. After drying, fix it on the wall.

When creating a wall key holder with your own hands, it will help improve the decorative parameters of the product without extra costs and personal artistic talents.

Therefore, this technology is worth studying in detail:
By preparing the surface, chips and irregularities are removed.
Apply 2-3 layers of white paint, which forms a neutral color background and eliminates minor defects.
Cut out the design you like from a napkin, making the edges uneven.
Having placed such a blank in the right place, apply (transparent PVA). Move from the center to the sides to remove air bubbles.

After drying, coat with varnish.

Article

How long have you been looking for your keys? It doesn’t matter when: in the morning, hurrying to work, or in the evening, getting ready to go for a walk. The question is that in the ranking of the most frequently lost items, keys are in first place (sharing it with the TV remote control). This problem constantly steals your precious time and nerves.

What to do about it? Naturally, have a separate storage space.

There's a place for everything

Just putting your keys in one place is trivial. Moreover, key holders have existed for a long time - an original and convenient way of storage. They come in two types: pocket and wall-mounted.

Don’t rush to run to the store and buy yourself a key holder, because you can make it yourself!

Types of key holders for walls

When choosing a storage location, the main attention should be paid to the shape and size of the keys. These parameters will be the main ones during manufacturing.

How to make a key holder in the form of an overlay for a wall? Most often, planks are used, which can easily be placed in absolutely any corner and take up little space. If compactness is your main criterion, then you can use small shelves.

You don’t need a lot of materials or money here, just find a sheet of plywood or timber. In this case, in addition to the keys, you can place several more items on the shelf.

Nowadays it is very popular to structure everything: from the workplace to the work schedule. This approach can be transferred to the home environment.

Place a board on which the keys will be marked figuratively. The solution is perfect for those who have a large number of keys. It will be immediately clear which elements are missing.

For those who are constantly improving their home and keeping it in their own style, you can make a cabinet in the shape of a house or decorate it with additional elements. This will allow you not only to make a decorative element, but also to surprise everyone with your imagination.

How to make a wall-mounted key holder with your own hands?

Let's move on to the most interesting part. Buying furniture is nice, but doing something with your own hands is beyond competition. Let's start with the simplest and cheapest method.

We will need a box. The more original it is, the more effective the wall key holder will be. We attach elements to the back wall to fix the structure on the wall. It is enough to place loops that will be convenient to hang on the screws.

For lightweight keys, you can use a cardboard box, but to be safe, look for a wooden one or a crate. In the second case, you need to cover the wooden key holder with a moisture-resistant compound, so it will last longer.

Plywood is a universal material that can be used almost anywhere. If you have leftovers or pieces, using a special tool you can create a unique work of art.

What do I need to do? Everything is very simple:

draw the required design on a sheet of plywood;
find a hand jigsaw in your stash;
carefully cut out the elements (if the surface is slightly damaged, use an electric wood burner);
fasten all the elements and enjoy the result!

Ideas for decorative key holders

Let's reveal a few more secrets of making a decorative masterpiece.

Using dry branches will add uniqueness to your creation. It is enough to place them on a wooden board. You should not choose thin branches, because they may break under the weight of the key. Be sure to treat the wood!

For decoration, you can use previously dried mushrooms - boletus, for example. They are highly durable and can “please the eye” of the owner for a long time. To make a decorative design, just bend the fork in the desired direction.

This is just the beginning of the journey! Having gained experience, you will be able to realize all your fantasies and completely decorate your room with masterpieces.

Design of key holders

If you are more of an artist at heart than a sculptor, then it doesn’t matter! Stock up on acrylic paints and imagination. After all, you can make a work of art from any box or board.

This approach is suitable for anyone, because you do not need to have special cutting tools or skills. All you have to do is start drawing.

“A gift with your own hands is the most valuable.” This phrase has been with us since kindergarten. If we made crafts from leaves and chestnuts then, then why not apply these skills now?

After all, a homemade key holder will become a valuable item not only at home, but also an excellent gift for family or friends. When we do something ourselves, we put our soul into it. Any person will appreciate this approach.

DIY key holder photo

We will send the material to you by e-mail

Every apartment should be in order, and all things should be in their places, this also applies to keys. Every person has a bundle from their home, garage or office. In order to keep the item always at hand, a small but very important accessory was invented at one time - a wall-mounted key holder. Making it with your own hands is as easy as shelling pears, you just need to show a little imagination and follow the recommendations of our review.

The most original ideas for your home

In general, key houses can be divided into two main categories: open (metal, wood, leather) and closed models (used for careful or strict storage).Open wall key holders are a lightweight design with a holder that simply complements the overall design of the apartment.

Closed key holders are the most presentable; they look like a small “house” for keys.

To make a key holder for the hallway with your own hands, we will need:

Wooden blank in the form of a house.
Napkin with a picture.
Adhesive composition for decoupage.
Tassels.
Matt lacquer.
Light colored soil mixture.
Scissors.
Texture paste.
File.

Do-it-yourself decoupage of a wall-mounted key holder, the first stage of work:

Photo	Description
Preparing the surface	First, we prime the wooden house with two layers, then plaster it.
Cutting out the image	Cut out the desired image from a pre-prepared napkin.
Place the file face down	It is imperative to separate the layer where the pattern is depicted and apply the adhesive composition. Then we place the image on the file with the pattern down. Spread the resulting result with glue on top.
Place the image and apply varnish	After this, we pick up the stationery file and attach it to our house. We place the image with glue applied and go over the file with a roller. After all the work, carefully remove the file and let the product dry completely. We paint the borders with a light color and wait until our key holder is completely dry. After this, apply several layers of matte varnish.

Decorating the house

At the second stage, we decorate the wall decoupage of the key holder with our own hands. We will need a brickwork template and structural paste for further steps.

First you need to glue the roof and, using a palette knife, apply a layer of paste, which gives structure.After drying, apply glitter and a silver tint of paint. Let it dry again, then the house is varnished, dried and the fasteners for the keys are installed.

Decoupage of a pocket key holder

In addition to wall-mounted and tabletop key holders, there are also pocket models. Such a thing is not just the image of the owner, but also performs several functions. We will describe in a little more detail how to make a pocket key holder with your own hands. Let's take the simplest but most popular option. For this we need:

Leather flap, size 150*105 mm.
Studs that match the leather color.
Blank for key storage with carabiners.
Punch.
Scissors.

The pocket keeper will be much cuter if it has rounded edges. To make the markings correctly, you can use a regular bottle cap.

First, we attach the blanks with carabiners.
We lay out a bunch of keys and wrap the edges to determine the location for the rivets and make notes.
We make a spacer under the keys to strengthen the whole model.
We make holes along all the marked marks using a punch.
We fix the workpiece with rivets and attach the rivets to the lapels.

Decorative stitching made of contrasting thread with a slight indentation from the edge will add a special highlight.

After drying, coat with varnish.

A key holder is an interesting and necessary home interior detail that will help keep the keys to your house, car and garage visible. A thing that is truly necessary for everyday life. It will decorate and complement the interior design, and also speaks of the subtle taste and stylish choice of the owner. The device is attached to the wall, stored on the table or carried in your pocket. You can buy a key holder, but it’s easier to make one yourself from old wooden boards, magnets, frames, seat belts, and even old spoons and forks.

This device is made of a natural board on which four metal bolts are placed. The key holder attaches directly to the wall and is a great addition to any home decor. Her style combines two directions: rustic and modern. The board was not specially treated to preserve its natural beauty.

The key holder using an old picture frame looks original. It is painted or decorated with flowers, ribbons or fabric - it all depends on the imagination of the master. The hooks are screwed along the inside of the top edge of the frame. Their number is determined by the size of the selected square and the number of sets of keys that need to be stored.

The next key holder was made from a large key, to which several hooks were attached. This device is made in an antique style and has a universal color.

The key holder is made of thin wood in the shape of a small house. Its inhabitants are two wooden figures, which are taken out along with the keys. The front of the house is decorated with a small heart, and the keychains are made in the shape of a man and a woman. The partners' figures are connected in the evening, when the keys are placed in the home.

Ideal for lovers of minimalism and naturalism, a key holder in the shape of a honeycomb. Five magnetic hooks keep your essentials in one convenient place. The wood is sanded and treated with machine oil to bring out its natural warmth.

The second version of a similar device has a cream color combined with golden magnetic hooks.

DIY key holder ideas

1) What to do with silverware that is not suitable for food consumption? They can be adapted to fit original key hooks. To do this, take thin forks and spoons (3 pcs.), acrylic paint, small wooden squares, glue and three brass triangular hooks.

The easiest way to bend a fork is to throw it into boiling water. After it softens a little, use tongs to slightly bend the end of the handle upward.
Wooden squares are covered with 1-2 layers of acrylic paint.
Glue the underside of the teeth to the wood.

Make sure that the fork is straight and the amount of glue is moderate, otherwise the product will come out with a flaw.

Hooks are attached to the underside of the squares, with the help of which the key holder will be held on the wall.

2) During hikes and walks in the forest, you often come across natural materials that can be adapted into decorative items. For example, tree bark can become the basis for a key holder in the hallway. It is cleaned of excess, sanded and coated with varnish or paint.

Key holder made from cut pine for a country house.

The shelf, which gives pleasant memories of a holiday by the sea, is made of sea driftwood. It is decorated with a pine cone, cord and beads.

3) Weaving from newspaper tubes is not an easy task, but the products are quite creative. There are few consumables for such crafts - wound tubes, stain and PVA glue. Anyone who is familiar with this type of technology can make a completely budget key holder.

DIY decoupage key holder, photo

You can make an original piece of furniture from a cut of wood treated with sandpaper and coated with stain.

To create a uniform top layer, apply stain at least 2-3 times. After each application of liquid, the product is dried.

The wood is left in its natural color or a design is applied in decoupage style. The cut is first coated with acrylic varnish, and then the design is tightly applied (face down). After this, the product is dried for 2-3 hours. Before rolling the pattern, the paper must be wetted. The procedure is carried out until the whitish layer is completely cleansed and the pattern is clearly visible. Finally, the top of the key holder is coated with acrylic varnish.

Products in the romantic shabby chic style, when the surface is specially aged, look light and elegant.

The key holder in the shape of a house is decorated with a rustic design using the decoupage technique. Its base is plywood or thin board. Hooks are attached to each corner of the device.

DIY wooden wall key holder, master class

For a universal key holder you need:

two pieces of wood: the main part (50 cm x 45 cm) and an auxiliary part (shelf 20 cm x 5 cm);
stain;
liquid Nails;
2 clamps;
sandpaper.
flower pot ring;
3 hooks;
flower.

To begin, two pieces of wood are cut out, sanded and painted. Hooks are attached to the main shelf on the back.

Using two clamps and liquid nails, connect the wooden base to the shelf.

Then screw in the hooks for the keys and the holder for the flower pot.

The rim of the pot can be painted golden and then placed on a shelf. Choose succulents as a flower or use a pot to store small items.

DIY key holder drawings

Scheme for cutting out a key holder from plywood.

Key holder in the form of a house “He and She”

An organizer for small items and keys, made of plywood and decorated using decoupage technique.

A device for storing keys in the shape of a flying mouse.

DIY plywood key holder step by step with photo

For a simple plywood key holder you will need:

plywood,
paper,
glue,
calipers,
screws,
screws and small hooks.

A circle is drawn on a piece of plywood, and then the edges are leveled using a caliper. A rectangle is attached to the circle, from which the rod and teeth of the key are made.

The edges are cut with a jigsaw and sanded. Then the base is covered with paper or painted.

The edges of the paper are folded and trimmed with a blade.

To keep the key holder in a horizontal position, 2 crutches are attached to the rod. There are several hooks on the front.

DIY leather key holder with pattern, step by step

A square (12 x 12 cm) is cut out of a piece of bright leather. Bend the workpiece in half and mark a rectangle (8 x 2 cm) in the center, not reaching the edges 2 cm. Its edges are coated with Moment glue and a zipper is inserted. To decorate the key holder, you can apply embossing using a cliche. The template is preheated through the foil with an iron, and then pressed firmly against the skin with tongs.

The foil is removed. A zipper is sewn into the edges of the accessory. Excess parts are cut off. The edges of the product are covered with glue, not forgetting to insert a loop for keys. Then the ends are connected and secured with clamps. After drying, the corners of the workpiece are cut off and the edges are threaded.

Keys are placed in the ring and excess threads are removed.

Pocket key holder, photo

A pocket key holder has small dimensions, because it is carried in a purse or in a trouser pocket. Such models are made of leather, felt and leatherette.
A pocket key holder with a carabiner, worn on the trouser belt.

Key holder with buttons and four carabiners.

Model with spring-loaded fittings and ring.

DIY cardboard key holder, photo

Thick cardboard can also become the basis for a key holder. Pizza or cookie packaging is often used for such things. Consumables will be cheap, but the item can come out quite creative. The cardboard is decorated with fabric, decoupaged, or pebbles and flowers are applied.

Wall fixture made of cardboard base, decorated with fabric and woven newspaper tubes.

Painted cardboard is complemented by bright houses.

Key holder in the shape of a hand

Fans of original things will not be able to pass by this accessory in the form of a hand. Such an item can be made in the form of a picture, where a magnet is installed on each finger.

Key holder in the form of a separate beckoning hand.

How to sew a key holder with your own hands

Key holder in the shape of a cat. To make it you will need:

denim,
cotton for lining,
adhesive base,
lace,
a small piece of padding polyester.

The template includes seam allowances.

First, let's cut out the parts according to the diagram.

Using a cobweb we glue part 1 to denim blank 2. Fold the edges of the cotton, iron and sew with a zigzag.

Then the 2 pieces (jeans and cotton) are put together.

The blanks are folded along the seam and passed with an iron.

At the next stage, they begin preparing the ears. Parts 3 are connected at the edges.

Turn it inside out and smooth it out. The ears are sewn to the body, and the sides also go through.

In the picture, pink stripes mark the places for the holes of the cord on which the keys are attached.

All seams are stitched, leaving marked areas. The product is turned inside out and a lace slightly longer than the base itself is prepared. The fish is turned inside out and the edges are sewn together. The cat's face is embroidered.
The lace is inserted into the hole and the keys are attached.

DIY key holder from a box

From such a simple box you can make an original key holder using the decoupage technique, and decorate its walls with Chinese characters. They attract good luck and prosperity into the home.

A wooden cigar or tea box will turn into a real masterpiece in just a couple of days of work.

DIY felt key holder, photo

Felt is a practical material, soft and comfortable for sewing. Its colors are rich and bright, and the cost of felt is quite affordable. Key holders in the shape of funny animals are mostly made from felt.

You can make funny mice with your children. The keys are held on a cord, which is made of interlacing multi-colored threads.

Accessory “Sneakers” for little athletes.

The accessory can be crocheted or knitted from leftover yarn. It is decorated with embroidery, beads and buttons.

When starting to make a key holder, they take into account the interior design, the number of keys and their financial capabilities.

Master Class

DIY wall key holder... The hallway also requires decoration. A DIY wall-mounted key holder can be an excellent decorative element of this room. It’s not difficult to make, and the materials for a wall-mounted key holder can be found in any home. We suggest making a key holder imitating a brick wall.

DIY wall key holder: step-by-step master class with photos

So, a master class on making a key holder for the wall requires the following materials:

Thick cardboard;
A beautiful photograph or picture;
A small piece of wallpaper (optional);
White paper napkins. You can take the bottom layer from multi-layered colored table napkins;
PVA glue;
Acrylic and watercolor paints;
Acrylic glossy clear varnish;
Four small nails (for attaching a wall key holder with your own hands) and office nails as a hanger for the keys themselves);
Brushes, scissors, pencil, ruler.

So, how to make a key holder with your own hands.

Cut out a rectangle from thick cardboard. Its dimensions coincide with the dimensions of the finished product.

Our cardboard didn't have a very attractive back side, so we decided to cover it with wallpaper. From a piece of wallpaper, cut out a rectangle, one centimeter larger than the main cardboard on each side. We paste it over the cardboard.

Now let's decide on the picture. We found a photo of Edinburgh in a magazine.

Cut it out.

We cut many small pieces from cardboard. These are future building blocks.

Glue a picture to the center of the base and begin to cover it with bricks. Bricks can be glued either with PVA or with a regular glue stick. The bricks must have gaps between each other. The bricks should be uneven and laid with a shift (i.e., the way a real brick wall is laid).

We fill all the space around the picture with bricks.
The bricks extend slightly into the picture, and in some places, on the contrary, they do not reach it.
We take PVA and a brush and begin to generously cover the bricks with glue.

Cover the smeared area with a napkin and brush over the napkin with a dry brush. Use the back of the brush to draw gaps.

So we gradually cover all the bricks with a napkin.
We cut the edges of the napkin along the outer perimeter and coat it with glue so that they stick to the base.
Now let’s coat the entire surface with glue again.
This is necessary for the product to become durable.
Now our brickwork needs to dry. This will take at least 12 hours. This is what the product will look like after 12 hours.
The cardboard became a little harder.
Let's start painting the bricks. First, let's paint only the bricks terracotta color.
We used regular watercolors for children's creativity. The right color just happened to be there, so there was no need to mix or invent anything. We try to ensure that the watercolor is not very liquid. Those. Lightly moisten the brush with water and dip it into the paint.
The paint will dry very quickly. Now let's draw the jointing. For this we used gold acrylic paint. We draw only the seams between the bricks. To prevent the bricks from being monochromatic, brush them with gold paint and smear them with a sponge.

Using the same gold paint, we paint over the free space around the picture. Leave until completely dry.
Acrylic paint dries very quickly, so after about 15 minutes the product can be varnished. Using a clean wide brush, apply acrylic varnish to the entire surface (including the picture).
The varnish will not only give the key holder a glossy look, but will further protect the paint from fading and contamination.

And this is how a hand-made wall key holder will look on the wall.
We nailed the key holder to the wall with small nails. They took a clerical nail and painted it gold. They let it dry and hammered it into the key holder.
The heads of the nails that were used to nail the product to the wall were also painted gold.

Of course, a key hanger can be made from different materials: ceramics and metal can be decorated using the decoupage technique or painted. You can make a cardboard key holder using the scrapbooking technique. We conceived a hanger that would be reminiscent of travel and at the same time be an extraordinary and functional frame. To make a key holder we used a wooden board and our favorite photograph.

WHAT DO YOU NEED?

Materials

wooden board 40 x 20 cm, thickness 1.5 cm
photograph 15 x 20 cm
hooks 4 pcs.
watercolor paints
matte acrylic varnish

Tools

manual jigsaw
drill
drill attachment nylon brush
tassel
sandpaper

Watercolor paints We used it exclusively in a small craft intended for use at home. It is more correct to age wood using stains.

Description: I present an autumn decorative key holder made using the decoupage technique.

Step-by-step process for making a key holder

1. Materials and tools: a board, a napkin with a suitable image, PVA glue, sandpaper, scissors, brushes.

2. Prepare the surface. Sand the board with sandpaper and cover it with acrylic primer. Choose a napkin with a suitable motif.

3. Cut out a piece of napkin to the size of the board.

4. Remove the extra 2 layers of napkin and glue it to the surface using PVA glue (decoupage technique).

5. After the glue has dried, apply putty to the tree crown using a palette knife to add volume to the leaves. Instead of putty, you can use structural paste.

6. From another napkin, cut out the same motif with the image of a crown and glue it, covering the applied volume with PVA glue.

7. Cover the foliage, additionally adding volume, with modeling gel paste.

8. After drying, the paste becomes transparent.

9. We glue gold leaf to the ends of the future key holder, then we fix the image with 1-2 layers of acrylic varnish.

All that remains is to attach the hooks and use them. Now the keys will always be in their place!

Very original key holders are made from an ordinary frame in which the keys act as a picture. Of course, the frame should be decorated with carvings with twisted elements, possibly with gilding. In general, the frame should be a work of art in itself.

How to make a key holder from a branch?

A very unusual decorative key holder will be made from an ordinary piece of driftwood or a thick branch. Don't rush to laugh. This beauty might look like this:

The costs for such a key holder are minimal, the material is environmentally friendly, and the cheerful, bright design will lift your spirits before leaving for work. True, such a key holder will only look good in a well-lit room.

Using the example of a key holder, you will see how you can make an imitation of brickwork from cardboard. Then your imagination will tell you what other household items can be decorated with the same technique.

For the key holder you will need:

Thick cardboard (from any box or crate).
Napkins or toilet paper - they should be thick (if they are generously smeared with glue, they will not turn into “porridge”).
PVA glue.
Acrylic paints and varnish.

As the base (back wall) of the key holder, which we will decorate with bricks, it is better to take a rectangle made of fiberboard or plywood - hooks and loops will be attached to this base.

We cut out rectangles-bricks of approximately the same size from cardboard and glue them onto the base, leaving gaps between them.

So we seal the entire surface required according to the plan. In our example, a sign with an inscription is glued to the center of the key holder, and on the top panel there is a picture (work using the decoupage technique).

Leave to dry.

We paint the dried composition with red-brown paints. Brick coloring looks great in combination with bronze, silver or gold paints (first we paint the seams between the bricks with one of these paints, then we paint the bricks, leaving a shine between them).

When the paint has dried, you can go over the bricks with the same bronze or golden paint with a dry brush (dip the brush into bronze, smear the paint from the brush on unnecessary paper until it becomes almost dry, and only now brush it over the bricks) in one direction.

Cover with clear acrylic varnish (it is better to use matte varnish).

We attach metal accessories and the key holder is ready. If you want, hang it for yourself, or give it to someone.

Today, dear needlewomen, I will tell you how I made such a key holder.

I’ll tell you today, but to do it, taking into account the drying of paints and varnishes, the purchase of all sorts of little things like screws and ribbons, will take three days, no less, so if there are those who want to repeat my glorious feat, get ready right away, it’s not a quick task.
I’ve wanted a key holder for a long time; it’s a very useful thing in the household. Otherwise, all sorts of keys are lying around everywhere. Especially those that are not used every day. For example, the key to the barn was irretrievably lost over the winter, and the lock had to be changed. I also lost the key to the window, and I can’t wash it from the inside, and it’s a shame to break the glass. Of course, I covered the window with curtains, but it’s still a shame.
Buying a key holder is a toad - and the thing is not cheap, and there is a whole collection of unused napkins in the chest of drawers. All we need is a piece of plywood and a jigsaw, preferably an electric one. Lyudochka 4erepawka found both of these things and she kindly provided me with this blank:

In addition to the blank, we will need:
1. Some kind of primer for wood;
2. Acrylic paints;
3. If we want to make cracks, use craquelure products;
4. Napkins (decoupage cards, printouts with designs - whatever you like best);
5. PVA glue (or special glue for decoupage);
6. Glue like “Moment”, “Super gel glue” or a glue gun (i.e. something very, very strong)
7. The brushes are different;
8. For the gratings - polymer clay (you can take wooden blanks, ready-made wicker gratings, if anyone knows how - you can, for example, make a grating from newspaper tubes - a very cheap material; in general, there are a lot of options; I took polymer clay because there is nothing suitable in I couldn’t find any on the farm, but somehow I didn’t immediately think about newspaper tubes);
9. Ribbons, needles, threads, scissors.
10. Hooks, loop, screws, screwdriver.
11. Patience. Just a lot of patience.
So, let's begin. We take our blank and the first thing we do is prime it. I used this tool:

There is no need to buy such things specially, they are expensive. You can use, for example, Aquastop. We prime on both sides to extend the life of our future key holder.
Here is the blank after priming:

Next, the idea was this: the key holder should be “antique”, so I chose a delicate pattern with lilies and decided to make a craquelure. The two-component one hasn’t worked for me yet and, in order not to risk it, I decided to use the one-component one.
For the bottom layer I used this acrylic enamel:

Attention! It is better not to use such enamel. It has very low adhesion; varnishes and other paints adhere very poorly to it.
I still have it after painting foam plastic ceiling plinths (it’s ideal for these purposes), but I need to use it somewhere.
Therefore, this is how we paint the bottom layer with acrylic paint of the color that our cracks will be.

After complete drying (according to the instructions for the enamel, it takes 24 hours for me; for art paints it’s much less), apply craquelure varnish, I used this one:
Wait for it to dry to touch (if you overdry, you won’t get cracks)

Next we apply white acrylic paint. Here's the result:

Next, take a napkin and cut out the motif (I cut it off).

The pattern on my napkin is of very delicate shades; after removing the two lower layers of the napkin, it was practically no longer visible. When I applied the napkin to the key holder, it turned out that in the places of the cracks (large cracks) the motif was completely invisible. Therefore, I painted the parts where the flower should be with white paint. Accordingly, the layer turned out to be uneven, despite sanding the newly applied paint. There were two ways out: either remove all the layers and start the work again (make the cracks smaller and more gentle), or try to turn the disadvantage into an advantage. I chose the second option. Two circumstances played a role here: 1) the overwhelming number of “jambs” of handicraft work can be somehow played up and pretended that this is how it was intended; 2) I am a naturally lazy creature and if it is possible to neglect something in order to achieve a result as quickly as possible without loss of quality, I will definitely neglect this “something”. I found the following solution: after applying a thin, thin layer of white paint in the place where the napkin would be and without waiting for it to dry completely, I blotted the undried paint with a paper napkin (applied it, pressing it, and immediately removed it). The result was unevenness and roughness, which, according to my expectations, should have enhanced the effect of paint cracked with time.

I love it because you don’t have to apply it to the workpiece itself or to the inside of the motif - you can just apply it on top of a napkin and everything will stick wonderfully. Next to the photo is the brush I use when gluing motifs - it is very convenient for these purposes.
Here's the result:

Cover the top with the required number of layers of finishing varnish. Two were enough for me.
While the varnish is drying, you can work on the grate. I used polymer clay "Bebik", bought half a pack, it was enough.

I just rolled and cut the sausages of the required size and quantity, without particularly worrying about making sure they were the perfect shape. The main thing for me was the ideal length. I had to suffer a little with the future “roof”; it was very difficult to try it on the blank; the “roof” kept trying to bend or stretch out in length. But perseverance won - she managed.

I planned to paint the finished parts with the same bronze enamel that I used for the cracks (that’s why I used white polymer clay), but fate decreed otherwise.
Either it’s because of my antediluvian oven, which can keep the temperature at least 180 degrees, or because of a saucepan with plastic handles that was accidentally forgotten in the oven, but after baking the parts turned out to be this interesting color:

To be honest, I was very happy about this fact: I liked the color, and the problem with painting parts disappeared.
Then everything is simple. We apply it, try it on, take a glue gun and assemble our puzzle. Voila:
Next, take the ribbon for the leaves:

We cut off the edges and very, very carefully secure them with a lighter (we bring the flame from afar, slowly and carefully), as a result you can get very nice curves at the ends:

Then all this can be put on glue. However, I decided that it would be better if the flowers were removable and could be easily washed.
I sewed the buds to the leaves not in the middle, but like this:

The long edge is left for tying to the grille.
All. The key holder is ready. Hooray!