What mods reduce FPS in wot. If the computer is very weak. System and environment

Let's consider a pressing issue for many gamers - optimizing the world of tanks and increasing FPS for weak computers.
Many people know that World of tanks uses only part of the power of your computer. Almost everything depends on the power of the processor. But what should owners of weak computers and laptops do? That's right, optimize the game using mods and programs. In this article we will look at the operation of all mods and programs and install them. If you have a weak computer, then thanks to these instructions you can significantly increase the number of frames per second (FPS) and will be quite comfortable playing. Optimization consists of several stages.

To start install. This is very useful program to disable unnecessary effects. To install the program, move it to the game folder. Then run the WOT RES UNPACK file.

After it finishes its work, run the .

This program is the most important part of optimizing the WOT client. These textures are the hardest to count. We recommend turning off all effects except the movement of trees and cloud reflections, because they do not greatly affect FPS and do not provide any extra load.

It's time to install compressed textures, which are ideal for players who do not have powerful video cards. will make the game less beautiful, but you need to understand that beauty requires sacrifice. In our case, this is a sacrifice in the form of good graphics. We recommend installing the 25 percent version. It has the best ratio of quality reduction and FPS increase. Installation may take some time, sometimes quite long.
After the textures we will install mod that. As a result of this mod, the fog in the game will disappear and, when aiming at long distances, you will see the enemy more clearly. And when you switch to sniper mode, the freezes that most players complain about will disappear.
The next step is installation, which is done with only one purpose - to maximize the optimization of the game. It's not very pretty, but it's very optimized.
Let's move on to the settings of the game itself. We leave only the visibility range at maximum. We set the remaining parameters to a minimum or turn them off altogether.

After all these steps, it is recommended to defragment hard drive.

• Update date: 14 Jul 2015
• Total marks: 34
• Average rating: 4.15
• Share:
• More reposts - more frequent updates!

For World of Tanks, the value of FPS (frames per second) - “frames per second”, “refresh rate” - without exaggeration, one of the most important factors that creates victory and defeat. Very often the outcome of a battle depends not on the thickness of the armor, not on the speed, or damage and penetration of the gun, but on a timely reaction to the game situation. Shoot first, dodge the projectile, substitute a thicker section of armor, etc. None of these tactics will work if World of Tanks is slow on your computer.

How to increase FPS in WoT if you still encounter such a problem? The first obvious and intuitive remedy is to adjust the graphics settings in the game. To do this you need:

1. go to the game client
2. open the main menu on the left top corner screen
3. go to “Settings”
4. open the “Graphics” tab

World of Tanks has a built-in performance diagnostic feature, so to get started, click "Auto-detect". The game client will conduct an express check of your hardware and select the appropriate settings. Try to skate a few fights with them. If the FPS problem has been resolved, congratulations, you can safely play. For the time being - until Wargaming rolls out the next update, which will add graphic beauty to the maps and tank models.

If problems with FPS have decreased, but are still noticeable, try setting all parameters in the same graphics settings menu to the lowest possible values, as was done in the screenshot above. If this does not help you, do not despair, you will still be able to play, but you will have to adjust the graphics using.

Let's start, oddly enough, not with the mods themselves, but with . The image in the game may “jump” not only due to a weak computer, but also due to the fact that the server takes too long to respond to your computer. The symptoms are easy to confuse, so you need to use help to select a server with lowest value ping. If you used to play on “some” server and now switch to the fastest one, the difference in gameplay can be astounding.

The next step, if choosing the optimal server did not help, is .

Every tank in the game is covered with texture - graphic representation surface of the tank hull. In fact, this is a completely ordinary picture, which can have a very significant size. As you play, the texture (or " ") is loaded into your computer's memory. If there is not enough memory, the operating system begins to use significantly slower memory to store information. HDD computer, which leads to a drop in FPS to the “slide show” state. To eliminate this problem, enthusiastic modders created . Textures can be compressed from 50% to 3% of their original size, significantly reducing the load on your computer and increasing the game's display speed, which means improving your performance.

When the game already looks like an arcade game from the late 90s, and the frame rate is still not encouraging, you can use one more trick - .

In addition to the fact that this mod reduces the load on the computer, it also, according to the game developers, gives an advantage in battle to players who use it, so its use is officially prohibited. The decision is controversial, because the display of leaves does not affect the camouflage, and you can target along the contour if you know these places. However, Wargaming does not have a reliable way to determine whether you have a prohibited mod, unless you yourself tell about its use by posting a screenshot on the official forum or telling, for example.

The last and most radical means of increasing FPS is.

This program disables effects such as shell explosions or gun shots. If you turn off all effects, the game speeds up noticeably, but it begins to look blind - you stop seeing some of the game events. For example, there is the sound of a shot, but the shot itself is not visible. It's quite confusing at first, but you can get used to it. We recommend using this program only when other methods of increasing FPS have failed.

If no manipulations with mods and programs have led to an increase in FPS to a playable level, accept it, it’s time to update your computer hardware in order to play World of Tanks.

Share and win from 100 gold

Many people want to increase their FPS by at least 10 centimeters =). Even an increase of 5 FPS would give many people a small but chance for a normal game. This manual from the respected DESTRoqpuK will describe more than 8 ways to achieve the maximum that your computer is capable of!

Paragraph 1:
You need to increase the page file.
To increase it on Windows 7, you need to go to (My Computer\System Properties\Advanced System Settings on the left\Performance (Options)\If you play in a window, check the box for best performance\then click Advanced, check the box next to (programs) then virtual memory change \ select your disks, click to specify the size, set the initial one to 1536, maximum 3072 (this place will work for you to enhance the capabilities of the computer, that is, this place that is indicated will disappear from the hard drive) click set then apply and reboot the computer. On Windows XP. Right-click on my computer\properties and the rest is the same).

Screenshots:

Point 2:
You will need any flash drive that you do not need. We put it in the computer, right-click properties \ select the ReadyBoost tab \ check the box next to Use this device for ReadyBoost technology, set any size, preferably 2GB. If you need a flash drive, just check the box - do not use this device. (This item is only available to owners of Windows Vista\7) But you can try the eBoostr program, which is an analogue of ReadyBoost on Windows XP and below.
Download eBoostr from our server:

Point 3:
To speed up your computer boot time, clear registry errors and cache, we need the CCleaner program. Download, install, check the boxes as in these screenshots, if you want, you can put them somewhere else at your discretion.

Screenshots:

Clause 3.1:
Here is another ATF-Cleaner program. This program cleans what CCleaner does not clean. In it, check the select all box and click empty selected.
Download ATF-Cleaner from our server:

Screenshots:

Video:

Point 4:
Disable indexing. Open “My Computer”, right-click on the hard drive icon and select “Properties”. In the window that opens, uncheck “Allow disk indexing for quick search" After clicking the “Apply” or “OK” buttons, a new window will appear in which you will be asked whether to apply the selected attributes only to the current drive or to attached files and folders too. This process may take a couple of minutes to complete (depending on how many files you have on your drive), but you should be able to enjoy a little more fast work OS. Naturally, this only works for disks with file system NTFS.

Clause 4.1:
We disable Windows Update, to do this, on the My Computer tab -> Properties -> Automatic updates, uncheck the “Run automatic update"This is for WindowsXP SP1 and Windows2003 users, and those with 2000 or XP (without SP1) must check the box next to "Disable automatic updates. I want to update software manually".

Point 5:
If you only need a computer for playing tanks, I advise you to install Windows XP (Zver). It contains everything you need and nothing superfluous. You will need to update the drivers and install everything necessary for the game (directx 9). If you go to the browser only to watch the news on the office. tanks website, then you don’t really need an antivirus, I removed it (it eats the lion’s share of the RAM, and when updating it greatly increases the ping) But if you decide to leave it, then install AVAST FREE, it’s free, and upon registration you are given a license for 1 year, + it does not consume much of your computer's resources.
You can download Avast Free Edition

Point 6:
If you have little RAM or a weak processor, the Game Booster program will help you (It does not work on all hardware configurations, as it should, if after installing it it only got worse, remove it.) The program is in Russian, its interface is very easy to learn + get out tips, I think you won’t get lost in it.
Download Game Booster from our server:

Clause 6.1:
Is everyone familiar with the problem with the red sign at the beginning of the battle “not enough memory, restart the game”? Here's a program that solves it this problem WoT Booster. How to use: Turn on WoT Booster => launch tanks => go into the hangar => click in the Clean Ram program => go into battle => after each battle click in the Clean Ram program.
Download WoTBooster from our server:

Point 7:
If you have a weak video card or are the last to load into battle. will help you Wot program Tweaker - it removes all effects in the game as you wish - you can remove smoke and flames when firing, but leave smoke from the exhaust pipe, etc.
Download

A player's statistics in World of Tanks are influenced by three criteria: straightness of hands, high FPS and low ping. Moreover, if one of the criteria does not meet the “norms,” then the statistics are steadily sliding down. If a person does not know how to play World of Tanks, then over time he can learn to play better. But the account statistics will already be corrupted. In this regard, a huge number of twinks arise - second player accounts. “Curvature” of the hands is a fixable matter. To learn how to play, you just need to be able to analyze your mistakes and watch more video reviews and guides from experienced users. Ping directly depends on the quality of your Internet. But FPS is influenced by many factors. How to increase FPS in World of Tanks?

FPS (FPS) is a parameter that reflects the refresh rate of frames per second. Essentially, the higher the FPS, the more comfortable it is to play. But 24 frames per second is enough for the game. True, with spectacular explosions, FPS may drop, and the game will begin to freeze and slow down. Therefore, if you have low FPS, you definitely need to do certain work on his promotion. You can play with an FPS below 24, but slowing down the interface will lead you to crash. As a matter of fact, you will not be able to shoot or turn the tank in time.

Perhaps it’s worth saying that FPS depends on the characteristics of your computer and settings. Gaming PC owners don't worry or even know what low gaming FPS is. But owners of laptops and weak machines struggle with increasing frame rates with each patch. The Wargaming company has set a course to improve the graphical component of the game, introducing new HD models of tanks and transferring the client to the Havoc engine. This led to a significant drop in FPS in the game. Most players had to abandon the improved graphics and disable all effects for a comfortable game.

Instructions for increasing FPS in the game World of Tanks

First of all, it is recommended to install new drivers for the video card. For example, Nvidia (website http://nvidia.ru) updates drivers for its video cards almost every two weeks. Go to the official website of your video card manufacturer and download the latest driver package. After installing them, restart your computer and launch the client with the game again. There will definitely be a performance increase when updating drivers.

If you don't have enough RAM, then increase the swap file and move the game to local drive C. When the game is on the same drive as operating system, game files load faster, and thus FPS increases.

Once these two steps are completed, it's time to move on to setting up the client. Open the World of Tanks game client and go to settings. On the first “Game” tab, disable the “Optics effect in snipe” items. mode" and "Dynamic camera", check the box next to "Use server sight".

Then open the “Graphics” tab and go to “Advanced”. First of all, select one of the graphics quality parameters. At this point you will have to experiment, starting with the lowest quality.

Check “standard graphics” and disable all effects in sniper mode. This will help increase FPS when firing a gun in a sniper scope.

After this, uncheck the items indicated in the picture below. By turning off grass, effects and track tracks, you will significantly increase the FPS in the game. In the latest patch, it became possible to disable the transparency of foliage, which led to an increase in FPS by 15-20%. Be sure to uncheck this item.

If after these steps the game continues to slow down, then download the WoT Tweaker utility, which allows you to disable effects in the game and optimize client files. The WoT Tweaker utility is easy to use, and you will not have any problems with it. Next to each effect there are two icons to disable/enable effects.

Remember that FPS is also affected by certain mods. For example, a “smart” mini-map, a fancy futuristic sight and strength markers in the “ears” reduce FPS the most. If the frame refresh rate is low, it is better to avoid these mods.

How to increase FPS in WoT? If this question you are still tormented, then you can install special compressed tank textures, as well as a mod for removing fog and smoke from maps. It will be much more useful to load compressed skins with penetration zones.

Most people who play World of Tanks do not have the most powerful computers. For this reason, the question of how to increase FPS in World of Tanks is especially acute, but is there really nothing that can be done?

Of course, you shouldn’t despair, because even frankly weak computer or laptop, you can take certain actions that will increase FPS and give the owner a little more freedom, the main thing is to know certain tricks and subtleties, which we will talk about now.

And remember, the minimum permissible value FPS in the game is 30 or more (the higher this number, the better). If the number of frames per second drops below thirty, get ready for lags, freezes, image jerks, and so on.

Client Graphics Settings

The very first step to how to increase FPS in world of tanks is setting up the client, namely its graphic section. It’s funny, but many people don’t even try to check the characteristics of the game settings, but here you can move the sliders, uncheck a few boxes, and the effect will be very impressive.
To change the settings, you need to click on the gear in the upper left corner of the screen and select “Settings”. Next, go to the “Graphics” tab and look. First of all, make sure that you are playing in full screen mode and not in windowed mode, this greatly affects the CPU load.

Now set the graphics quality to “Low” (maybe “minimum” or “medium”, depending on your computer), uncheck “Dynamic resize” and try reducing the resolution of the 3D render by pulling the slider to the left. This way you will reduce the load on your video card and increase FPS in world of tanks. It is also worth disabling the color filter and anti-aliasing if you have them enabled (the described changes are shown in the screenshot).

The first stage of settings is completed and you can safely move on to the second. Click the “Advanced” button in the same settings section, and you will see an extensive list of configurations for more complete changes. Here we check the box next to the “Graphics - standard” item and set the sliders as follows:
· Texture quality is low;
· Lighting quality - off;
· Shadow quality - off;
· The quality of additional effects is low;
· Add. effects in sniper mode - low;
· Turn off the amount of vegetation and post-processing.
· Uncheck “Grass in sniper mode” and “Effects from under caterpillars”.

So, you can manually adjust the quality of graphics and visualization of effects so that everything matches your hardware as closely as possible. The points described above apply to fairly weak vehicles, so you may need to play with the settings and test the changes in battle in order to find best option. As a result, the overall picture should look as shown in the screenshot.

Next, go all the way down and make the final changes:
· The quality of the landscape is low;
· Water quality is low;
· Turn off decal quality;
· Object detailing is low;
· Tree detailing is low;
· Drawing distance - it is better to set it to “medium”, since this indicator greatly affects the drawing of rocks, houses and other objects at a distance. If you reduce this scale to a minimum, there is a chance that a piece of rock will not be drawn, and you will shoot at it, trying to target the enemy peeking out from behind it.
· Motion blur quality is low;
· Dynamic change in the quality of effects - it is better to leave the checkbox;
· Turn off the foliage transparency and caterpillar tracks checkboxes.

After all these adjustments (screenshot below), click the “Apply” button, restart the game client and go ahead into battle to see how the FPS has changed in World of Tanks.

Mods to increase FPS in World of Tanks

If changing the graphics in the game client settings did not have enough effect, there is another simple way to lower FPS. You can install mods to reduce the load on your computer's video card and processor.

One of these mods, the most significant and famous, is WoT Tweaker. This modification is good because after running it, you can disable those graphic effects that are not displayed in the client menu, simply by checking a few boxes. This is smoke from the exhaust pipe, clouds, gunshot effects, etc. This script looks very simple, and all the changes subject to it can be seen in the screenshot. By the way, in almost every popular Games World of Tanks, which are on our website, you can find a built-in tweaker as well.

Installing compressed textures

Another very effective method Raising FPS in World of Tanks means installing compressed textures in the game. What does it mean? To put it simply, all textures in the game, for example, images of tanks and so on, are standardly at a certain level of quality and are archived in the root folder of the game. And subsequently, when you play, the game accesses these textures, loading them into RAM computer and video card.

If we change standard textures, tanks, landscapes, trees, turn off various smokes, clouds, and other beauties of the game, we thereby reduce the load on RAM and processor time for generating the game landscape and other textures. Thus, if translated into ballroom language, we increase FPS in World of tanks.

Download the WoT Tweaker Plus mod on our website in the fashion section for World of Tanks, the settings, as shown in the screenshot, are simple and intuitive. The extended version of the tweaker has the ability to compress textures, and it looks like this.

Driver Update

Another method to increase FPS in world of tanks, which sometimes bears fruit, is updating the video card drivers to latest version. The fact is that the creators of video cards sometimes optimize their performance by releasing new drivers, and installing them can give good result. Although this procedure is unlikely to help much, it is still worth a try.

To update knowledgeable people can go to the official website of the creator of the video card, Nvidia or AMD, and download the driver for their video card there. For those who do not know how to do this, it is recommended to download and install a special utility - Driver Puck Solution. With its help, in the driver menu, you can find the necessary update or even several, if any.

For correct use For this program, in the settings you need to check the box next to “Expert Mode” and start the search. After that, select the required driver and click the “Install” button; how to do this is shown in the screenshot. Next, just restart your computer and you're done.

As you can see, using quite simple tools and knowing some of the subtleties of setting up the game, you can easily increase FPS even on a weak computer. As a result, you will be able to install several mods and play comfortably, and the number of frames per second will not drop below 30, causing hated lags and image jerks.