How to close the TV cord on the wall. How to hide TV wires on the wall: the best design ideas. What about the computer?

The extension cord with chargers constantly gets in the way on the table or under your feet, collects a lot of dust, and also looks unaesthetic. Dealing with this problem is very simple: take a nice box, make a few holes in it and hide all the wires and cables there.

There are also ready-made solutions, for example Plug Hub from Quirky. This is a box made of hard plastic with a rubberized bottom. There are three holes on top for cables, and inside there are three fasteners that can be used to wrap cords that are too long. The Plug Hub can be placed on the floor or mounted on the wall.

2. Secure the wires under the tabletop

To secure the wires and extension cord under the table, you will need binders and screws (their length should be at least a quarter less than the thickness of the table top, otherwise they will go right through and the table will be damaged). First of all, attach an extension cord under the tabletop, preferably in the middle of the table or closer to the wall. Then secure the binders in the required places using screws. Connect everything you need to the extension cord and collect the wires with clamps. Visually the table has become much cleaner and neater.

There is a simpler option if you don’t need to hide a large number of wires. To do this you will need a construction stapler. To prevent the long wire from the lamp from dangling under your feet, carefully secure it with paper clips at the table leg. A small extension can also be secured with paper clips. For thicker wires, it is better to use special clamps (for example, these).

Stapler clips aren't your thing? Regular zip ties will do. Secure the wire to the table leg with zip ties. Wires that run along the floor can be covered with plastic or a board that matches the color of the floor. The extension can be secured under the tabletop using wide Velcro: secure it to the back of the tabletop with screws, and then attach the extension. To prevent the wires from dangling under the table, run them through cable channels - they can be purchased at any hardware store. You can fix the channels themselves with electrical tape or a regular plaster.

3. Organize your cable storage

Organizing them correctly will help you get rid of tangled wires. First, collect cords from phones, players, game consoles, and tablets throughout the house. Then take boxes (preferably prettier ones), place cardboard dividers inside them, label the location for each cable (so you don’t get confused later) and lay everything out neatly. To prevent the wires themselves from getting tangled, use regular cable ties.

If you don't want to deal with boxes, buy a basket and save up more toilet paper rolls.

If the wires don't bother you, you can simply attach a label to each one to make it easier to distinguish between them. For example, like this:

4. Keep all necessary wires at hand

We can’t hide all the cables in a box: we need some of them almost constantly. The solution is simple: secure them to the edge of your desktop so that if necessary, you can reach out and connect the device to the desired wire. Sugru will help us with this - plasticine-rubber and one of the most irreplaceable things in the household. Don't believe me? Then take a look.

Roll Sugru into small balls and place on a table support. Then use a utility knife to remove some of the plasticine (be careful, try not to deform the balls too much). Life hack: to prevent the plasticine from sticking to the blade, first rinse it with soapy water. Then adjust the shape a little with a sushi stick or toothpick to create neat hollows (they should be slightly wider than your wires). Everything is ready, you can fix the cables.

There is an option for those who know how to work with wood. A small block with holes will help organize all the wires on your desktop.

The simplest solution is to pass the wires through binders attached to the tabletop.

5. Don't hide wires

Seriously, if you get creative with it, cables can be an interesting decorative element.

We welcome everyone who visited us on the Internet. Our portal is related to electrical issues, but we do not forget to periodically talk about things related to it indirectly, which, however, are no less important in our everyday life.

The choice of today's topic fell on a TV on a bracket, namely, how to hide the wires from the TV on the wall. At first glance, it may seem that the question is not so complicated, but even the most ardent skeptics, after reading the material, will discover something interesting and new. So, let's go!

We will start with the most obvious and will gradually move towards more interesting and original solutions.

Right into the wall

Today, hidden wiring is more popular than ever, and in general, people try to hide from sight any communications that, in their opinion, spoil the appearance of the interior. The antenna wire for a TV was no exception, which very often has to be stretched across the entire apartment or house, since a high-quality video signal can often be obtained only by installing the receiver only in a certain place.

• In solving this problem, floor skirting boards with cable ducts are very helpful, capable of hiding most of the cable along its length. However, if the TV is hanging on the wall, the wire has to be taken out of the baseboard and directed towards it, and it’s not difficult to guess that the whole picture immediately deteriorates.
• Plus, don’t forget that the television antenna wire is not the only cable that fits the TV. At a minimum, you will need to power the equipment from the electrical network, but at the most, it will also include: a LAN Internet cable (many modern TVs are, in fact, a computer capable of accessing the network); wires for transmitting video and audio signals from various DVD players, TV receivers, HI-FI speakers, etc.
• The picture begins to emerge and is completely terrifying, and sometimes the most that can be done is to wrap everything up in a heap with nylon ties, and at least somehow try to disguise all this disgrace.

Perhaps the most time-consuming and dirty way to hide such a number of wires would be to lay them in grooves made in the wall during repairs. However, the method can be safely called the most accurate and technologically advanced, since the wires hidden in this way will not be chewed by your cat, no one will accidentally touch them with their feet, plus everything will be displayed in a single console containing all the necessary outputs.

In this case, there is no need to drill into the entire wall to route all the wires around the room. It is enough to stretch them to the same baseboard and hide everything else in it.

The big disadvantage of this approach is that it is applicable only in premises where renovation work is being carried out. If your walls are just finished and you don’t want to touch them in the near future, then scroll straight to the next chapter, which will offer alternative methods for hiding a television antenna wire.

If you are ready to take drastic measures, then stock up on tools and move forward:

• First of all, you need to accurately mark the location of the TV on the wall.
• Next, you determine which bracket you will use for installation. This point is very important, because, despite the global VESA standard, which includes the most common mounting points, the brackets themselves can be of different shapes and dimensions.

Advice! Without paying attention to this, you can end up with communications peeking out from behind the TV body, since the bracket is too massive, or it will interfere with switching.

• It is advisable that you already have the device in your hands so that everything can be measured accurately.
• Try on the bracket for the TV and measure the distance that remains to the edges - this is where we will place all the sockets.
• We transfer the measurements to the wall and start dusting. Using a grinder, cut two vertical stripes a couple of centimeters deep, at a distance of 2-3 centimeters from each other.
• Next, the inner part is hollowed out with a hammer drill to form a full-fledged groove.

• Afterwards, using diamond bits, a series of holes are made for the purchased TV socket. Immediately make sure that this element contains all the necessary outputs and a sufficient number of power points so that it is enough to connect all the equipment.
• Further actions are extremely simple. First, all the wires are laid in the grooves, which must first be secured with plastic staples so that they do not fall out and interfere with further plastering.
• The ends of the wires are connected according to the diagram with the socket, and it is installed in its place.
• All grooves are sealed with gypsum plaster, after which subsequent finishing is carried out.

Cable channel

A less elegant solution would be to use a cable channel, but not everything is so simple - you can make this element yourself or find a non-standard store-bought option, making it an integral part of the interior. Plus, don’t forget that implementing such an idea will be much easier and faster.

Having studied the assortments of electrical goods stores and electronics stores, you can find the following types of cable channels:

• The simplest option is PVC. We've all seen them - they're an ordinary plastic box in white or another color, which has a removable lid held on by latches. Such a product can be successfully integrated into the interior only if it matches the color scheme of the surroundings - it merges with it or, on the contrary, is brightly contrasting.

• Quite a rarity - models made of MDF, which can be effectively combined with the surrounding environment.
• Metal options– most often it is aluminum, which is shown in one of the photos above. This product looks impressive enough to become part of some futuristic interior.

The structure of all models is very similar. They are attached directly to the wall using dowel screws, after which all connections along with the wires are hidden under a decorative cover.

As already mentioned, in some cases it is advisable to make a box with your own hands. The quality of workmanship and the final appearance will depend entirely on your ability to handle the tool, as well as the type of materials used to decorate the room.

The photo above shows a very simple and at the same time effective way to assemble such a box. It is made from planed boards, between which all the wires are laid. You can place any decorative overlay on top of them, and the boards themselves can be painted in any shade to make them as inconspicuous as possible.

Special furniture

Furniture manufacturers also did not ignore the problem and offered the buyer their solutions.

As you can see, the variety is very large, and there are plenty of non-standard furniture options. In part, they are not able to hide all communications and still require gating, but with this approach there will be much less dirt, so you can resort to this method even in a renovated room, doing everything as carefully as possible.

Creative approach to problem solving

Well, for dessert, we offer you several options that can not only be effective, but will also allow you to additionally decorate the room.

Decoration

A very interesting way out of the situation would be not to hide the wires from the TV on the wall, but to decorate them, that is, to make them part of the interior.

Here are some interesting examples:

There are a lot of decoration options, and even manufacturers offer their own solutions. And if you have enough experience and imagination to create and implement your ideas, you can create a real masterpiece for mere pennies.

The simplest methods of artistic decoration will be the following options:

• Parts of the wires can be placed behind the furniture, attached to it on the back side with tape or staples;
• Install live plants under the TV;
• Use varnished driftwood;
• Make a necklace out of wire by putting large beads on it;
• Use ready-made plastic fasteners from the manufacturer;
• And much more.

Decorative boxes

If the wires themselves do not bother you much, but massive tees and extension cords are an eyesore, then an original solution to the problem would be to place them inside a decorative box, which you can make yourself, or purchase a ready-made version. By the way, instructions for assembling one of these solutions will be given in the video attached to the article.

Various devices are also very effective, allowing you to hide and secure the largest parts in inconspicuous places.

Here are some photos with similar solutions:

That’s basically all we wanted to tell you about how you can hide or disguise the antenna wire for a TV and other cables. No need to put up with reality! Approach the matter wisely, and the result will not keep you waiting!

We choose wallpaper with a cute flower or a fashionable snow-white finish, shabby or, on the contrary, ultra-modern furniture, napkins that match the curtains and cushions on the chairs - in a word, we create a special little world with a unique style in our home. But there are things that cannot be avoided in our age of progress and which, taking advantage of this, impudently spoil the entire idyll we have carefully created. These include, for example, electronics and household appliances. However, manufacturers began to produce equipment in a large assortment, suitable for different styles, and in built-in versions. Another enemy is the wires stretching from this very equipment along the walls and floor. For those for whom they are an unbearable eyesore, we offer several ideas for disguising them.

We all know that most often the wires are hidden under the baseboard, and they try to match the sockets to the color of the finish and buy them with special lids that ensure safety for children and a more attractive appearance. But what if, for example, a new Internet operator came to you and installed new wires? Or have you decided to move the TV to that corner of the room where there is no outlet? Why not redo all the repairs because of this? You can always be creative and block off the wires, for example, with a decorative fence. And block the outlet or new Internet router with some kind of homemade barrier, turning the unsavory element into an art object. The example below shows an easy-to-create geometric iceberg.

To ensure that the wires lie behind such fences without bristling, another well-known way to make the appearance of the wires more neat will help us - zip ties.

You can make these clamps yourself from regular Velcro. Velcro clamps are also quite easy to find on sale; their significant advantage is their reusability.

You can also make homemade fasteners for wires from office clips. Clips as clamps can also ensure their fixation to the wall. From the same clothespins you can make a separator for the charger inputs.

Even though the idea of ​​using wire clamps is obvious, not all of us realize how useful they can be in everyday life. Here's an example of how the look of your desktop changes thanks to these simple things.

Now on sale you can find very nice versions of clamps, for example, in the form of leaves.

There are also camouflage covers for wires based on the same plant theme.

You can play up the look of wires stretching across the room with the help of improvised means, stickers and your own drawings.

If the insulators on your wires are at least a little similar to aesthetic ones, you can not disguise them at all, but, on the contrary, make them an object of design art and general attention. Here are some examples for inspiration. This idea is especially suitable for loft-style interiors.

Wires hanging from the desktop, if your desk is against the wall, can simply be curtained.

Or reason with the help of special hanging hammocks.

Such a device can be ordered from, where there is another gadget for pacifying tangled wires.

You can find similar separators for wires and charging inputs on sale in the form of boxes.

However, it is not at all difficult to make such a separator yourself, for example, from a shoe box. Your new desktop device will look especially beautiful if you wrap the box with beautiful paper or fabric.

A wall drawing made of wire will become the “highlight” of the interior. A TV hung on the wall looks original, reminiscent of a painting, and allows you to save free space. In any case, this is an interesting design move that allows you to improve the interior.

Due to the fact that modern apartments have a large number…

How to hide TV wires on the wall? Secrets, design ideas and life hacks

A wall drawing made of wire will become the “highlight” of the interior

TV hanging on the wall, looks original, reminiscent of a painting, and allows you to save free space. In any case, this is an interesting design move that allows you to improve the interior. Due to the fact that in modern apartments There are a large number of household appliances, the issue of masking wires is relevant and worries many owners. Do not panic, because there are a huge number of options to solve this problem. You should rely on your own imagination and choose a creative approach to solving this problem.

How to remove wires in the interior?

As already mentioned, there are several options. Some require only creativity and imagination, while others require certain skills. Let's look at the main ways to improve this situation.

Wire decoration

This is the easiest way. You can simply hide the protruding pieces behind a closet, live plants, original curtains and driftwood. In order to disguise this wire, it is not necessary to make it invisible. By turning this element into part of the decor, you can enjoy the environment and the fruit of your own labor. Also for this purpose, special boxes can be used, used in various shapes, materials and colors.

Using available tools and some design techniques, you can decorate your TV cable in an original way.

It is important to know! If you want to get an impressive result, you should not undertake such events yourself, especially if you lack the appropriate skills. If you turn to professionals, they will do all the work efficiently and quickly, and there will be no traces left on the wall.

Alternative decorative options

If a person has well-developed creative thinking, he will quickly think of ways to disguise cables. In this case, you can use only available materials. There are a huge number of options, and you need to choose the method that will be appropriate for a particular decor.

It is important to know! During the work, it is necessary to take into account the fact that it is highly recommended not to violate the integrity of the cord sheath. After all, this can not only contribute to the failure of the device, but also lead to an emergency situation.

Hiding wires in a renovated room

If there is already a repair and you do not want to violate the integrity of the wall, you can start designing a channel of wires and cables directly on the surface. Making such a box will not be difficult. After all, there are a large number of construction markets and other retail facilities. To do this, it is necessary to paint the resulting protrusion in color that matches the wall. You can also interestingly play with this moment through accessories and at the same time get the optimal design solution.

Cable frame behind TV

Advice! If the design options are more complex, you can drill into the wall. You can also run wires through it or use a channel built inside the wall.

In the first case, actions are appropriate for walls that are not load-bearing. Again, you should not carry out such work yourself; it is better to entrust it to experienced professionals.

Application of wall fittings

If desired, some types of furniture can be folded in the form of a designer. If possible, you can allocate empty space in the place where the TV should be placed. In this case, all cable branches will be located directly behind the furniture structures.

It is important to know! If you want to avoid problems with wires at all, you should consider installing a TV that operates from a centralized station as an option.

You can shout as much as you like that television destroys the brain, but this will not decrease the number of television receivers in modern houses and apartments. Moreover, televisions have recently become increasingly larger, the pictures are incredibly beautiful and are most often used for watching movies and TV series with the whole family. But sometimes the quality of the output image significantly correlates with the overall level of installation of the device. We are talking about wires that invariably accompany any TV placed on the wall. We offer you 3 ways to solve the problem of how to beautifully and cleverly hide the wires from the TV on the wall without making much effort - and, of course, numerous photos with the final solutions will help you understand the details of the arrangement.

Wire decoration

If we briefly describe the essence of this method, it roughly boils down to the following: “Why hide something if you can organically fit the wires from the TV into the interior?”. In this, of course, one can see the line of least resistance, but if in the end everything looks very beautiful and cozy, then why not admit that such a solution to the problem has a right to life?

Let's try to describe several options for elegant and natural decoration of TV wires:

1. silicone tips- you can choose a wide variety of shades, there are figured elements that bring a significant amount of originality and extraordinary imagination to the design;
2. figure twist- you can achieve an impressive effect if you simply fold the wires from the TV into any geometric figure or any arbitrary shape that meets your aesthetic needs;
3. plant branches- one of the simplest, but invariably true ways, which consists in placing branches of various green plants under the TV panel, as a result, the focus of attention from the wires shifts to attractive-looking greenery, or decorate the wires with voluminous paper flowers, which you can make your own hands;
4. decorative panels— wood, plastic, and even metal can be used as a material, the shape is arbitrary, and the dimensions should be just such as to safely cover all the wires coming from the TV (see examples of 3D panels for walls).

All that we have listed above are so-called tips for the “lazy”. Or simply for resourceful people who know how to save their energy. However, sometimes it is not possible to hide the wires from the TV in the same way as in the photo above. We have to resort to more severe measures.

Hiding wires in the wall

The most uncompromising way. It will certainly appeal to those men for whom wall strobing is one of the most exciting activities.

However, first things first. The order of your actions directly depends on what basis you have to deal with.

If the wall is made of concrete

Ideally, of course, think through such things in advance, even at the stage of major repairs.

In this case, you won’t have to tinker with the wall again, deforming the previously leveled surface. However, an ideal is only meant to exist in our thoughts. Therefore, let’s put doubts aside, and take a hammer drill or a good old grinder in our hands and start making groove in the wall.

1. make holes along the wire line;
2. remove excess fragments with a puncher, freeing up space for the future “stash”;
3. successfully place all the wires along the created groove;
4. insert the cable into the desired hole on the TV, check how correctly the wire is tensioned;
5. lay the created groove with plaster, it can be purchased at any hardware store;
6. finishing is at your discretion.

Of course, this is an option that is made for many years - so if you are going to soon change the layout of your apartment or house, you should use much more compromise solutions. You will learn how to properly tap walls for wiring from the article at the link.

Let's look at the photo to see how you can successfully hide the wires in this way.

If the wall is made of plasterboard

This option is much simpler, but will also require the use of auxiliary tools. In particular, a hammer drill. Make two holes:

• right behind the TV;
• at the bottom of the wall, at the junction with the baseboard.

The first hole will be needed in order to actually hide the wires behind the plasterboard sheet, and the second - for convenient connection to the network. We draw your attention to the fact that in this case it is best to install special skirting boards in the room with a recess for the cable - this way you can safely stretch the wire without any fear of damaging it.

Hiding the wires in a box

If, after all, ditching a wall is too radical a way for you to solve the problem of wires getting tangled and interfering with comfortable viewing, then this option can confidently be called a compromise. First, let’s talk about all the advantages of using it.

• extremely simple installation;
• magnificent aesthetic appearance;
• compliance with all fire safety standards.

Let's touch on the cons:

• the cost of purchasing a decorative box or cable duct;
• the need to make holes in the wall.

In order to disguise the wires from the TV on the wall, you can use: cable channel, and full-fledged decorative box. The photo below demonstrates the difference between these two elements.

The basic material from which the box can be made is:

• plastic;
• metal.

However, combined options using two of these materials are also often found.

What will be the procedure?

1. calculate the required amount of material, taking into account the direction of the wires and the size of the room;
2. fix the box on the wall, make the necessary cuts in corners and transitions;
3. keep in mind that the wire should lie freely in the box, so select the appropriate channel for it in diameter;
4. After installation is complete, you can repaint the cable channel or box in accordance with your preferences or interior design logic.

The whole process is on video

You can do without painting, and simply select in advance a box of a suitable color design with the wall. Fortunately, the choice in construction stores is now more than wide and can satisfy even the most extravagant requests.

A selection of photos with interesting solutions

Especially for those who like to spy on unusual ideas and later integrate them into their interior - our selection of photos. Perhaps this will help you find the most original and successful answer to the question of how to hide the wires from the TV on the wall.

Conclusion

If you didn’t know how to hide the wires from the TV on the wall, then you can probably easily cope with the seemingly impossible task using the methods described and the photos demonstrated. It seems like a very small thing, but what impact does it have on the interior? It’s not hard to guess that it’s these little things that make up the entire visual appearance of a room, so neglecting them, citing the lazy “it’ll do as it is” is somewhat stupid and frivolous.

How to wire wiring correctly: step-by-step guide - 50 photos and 4 videos

The apartment is well furnished, excellent renovation, everything is clean, the owners command respect, but this idyll is spoiled by protruding wires. How does this spoil the overall impression of the apartment’s decoration? Something needs to be done about this before someone gets injured because of them. Therefore, wires from electrical appliances must be carefully hidden.

The article presents several ways to solve this problem.

To make a groove in the wall for electrical wiring, use a wall chaser. Before laying the wires, it is necessary to place them in a corrugation - it will perform a protective function. Afterwards, simply place the wires in a special recess, and then cover them with a layer of plaster.

Hiding wires in the wall is a violation of its integrity, which means some money, dust, dirt, and the interior of the room suffers from this. There are other methods of hiding wires from human eyes without compromising the integrity of the wall.

If you are a creative person, you can experiment and make a composition of wires on the wall. Come up with an interesting image, apply it with a pencil on the wall with light, non-pressing movements. Use a thread to measure the required amount of wire.

Modern wires have only two colors - black and white. If this color scheme does not suit you, then you can purchase an extension cord, which, unlike the wires of electrical appliances, has different color variations. Before you start making the composition, attach the fabric to the wall, and you will understand whether it is a color or not.

This is done simply, you just need to use your imagination and you will see how your apartment will be transformed.

There is another interesting approach - camouflage. In this case, our friends will be baseboards, door frames, ceiling moldings and even heating risers. If you do this correctly, the wires will become invisible, which will improve the condition of the interior of the room.

Internet and telephone cables do not cause installation problems; the simplest thing is to hide them under baseboards, thresholds or in trims.

Particular attention must be paid to laying wiring under the floor. Today, special skirting boards are produced that already have a special niche for the cable. The outer panel is removed and wires are routed into this space, then the panel is put back in place.

The absolute advantages of this method are comfort, speed and cleanliness. The work does not take much time, without dirt and the like. These skirting boards contain wires from phones, computers and the like.

If you have nowhere to hide the wires, hide them under the floor. But here the question arises: how to do this correctly? Everything is very simple. Take a wall chaser or a hammer drill and make a recess in the floor for the wires, make a protective layer on the wiring - a corrugation, and place it in this recess.

After completing the installation work, level the floor with a solution of sand and cement.

If the apartment has a wooden floor, then you will have to remove the boards and lay the wiring in a metal pipe.

Most modern televisions are located on the wall where everyone can see them, so the television cable is visible to people. The best option is to hide the wire in the wall. To do this, use a wall chaser or hammer drill to make a recess in the wall, and lay the wire with the corrugation into it. At the end, the wires are fixed in the wall and plastered.

If you don't want to hide the wire, consider masking it.

It is best to consider all the nuances associated with hiding wires at the stage of repair work, so that problems do not arise in the future.

If you purchased a new TV, this may cause a lot of wires to appear. You can hide them in the wall quite easily. There are several options for this. But before that, you need to make sure you follow a few rules. For example, electrical wires must not have insulation damage. In addition, during operation they should not be exposed to condensation and moisture.

This should also include other devices that require the use of large starting currents during operation. If you are thinking about the question of connecting the TV to the wall, you should remember that the cables can be placed in a special channel with low-current lines, among them:

• phone line;
• Internet;
• signaling.

It is important to remember that television wiring must be done in one piece. Crossing cables and power lines of the electrical network is not allowed. If this cannot be avoided, then it is important to ensure the intersection at a right angle.

When carrying out installation work, you must use factory-made TV signal splitters and separators, because only they will be able to ensure reliable contact of wires and shielding of the input signal. Before you hide the wire from the TV on the wall, you must remember that twisted wires should not be used. They are not able to provide good shielding, which will certainly affect the signal quality.

How to avoid mistakes

When laying wires, you must avoid loops, sharp bends and twists into a coil. Soldered connections of wires must be used in the panel box, while unshielded sections must have a minimum length, this is the only way to prevent a decrease in the quality of signal reproduction. Distributors and cables should be located in places where they can be easily serviced. This includes distribution boxes.

If you are faced with the question of how to hide the wire from the TV on the wall, you should know that it can be located along with the power lines. In this case, the diameter of the central wire must be more than one millimeter. It is better to use a material with double shielding or a couple of layers of foil under and above the braid.

Laying the wire in the box

The simplest solution for masking a cable is to use a cable channel or a decorative box. Such products are usually made from:

• metal;
• plastic;
• combined materials.

Such a solution has a right to exist for the reason that it complies with fire safety standards, has an aesthetic appearance and is quite easy to install. However, this cable installation option has its drawbacks, they are expressed in the high cost of the product and the absence of recommendations from the manufacturer in the kit.

Before choosing a box, you need to determine its size, and also decide which cables will be hidden in it. If you are faced with the question of how to hide the wire from the TV on the wall, then you must remember that when laying wires in cable channels, there should be free space inside. It may come in handy in the future.

There is no need to rush into purchasing a cable channel, because you need to pay attention to transitions for corners, butt elements, plugs, tees and other fittings. It will be able to give the appearance of the box an aesthetic appearance. In addition, the master will not have any difficulties with installation. When choosing the products described, it is important to consider their quality. Experts advise paying attention to the castle. It must be opened and closed manually; there is no need to use additional tools for this.

Laying cables in the wall

The most aesthetic and reliable way to hide the cable is when the wires are laid in the thickness of the wall. To do this, prepare the voids between the plasterboard sheets and the wall itself. This method is the most common, but sometimes it takes a lot of time to implement, and in some cases this technology requires a lot of money. If you have installed a TV on the wall, how to hide the wires, you will certainly ask yourself the question.

In order to hide the cable in a concrete wall, you can use the gating method. The process will be quite dusty, and it is only suitable for those who are doing repairs and laying cables at the same time. At the same time, you need to decide which wires should be hidden, where they should emerge from the wall, and where the sockets will be located.

The grooves must be laid strictly horizontally or vertically so that you are sure where the wire passes. After all, sometimes after renovation there is a need to hang pieces of furniture or a picture. It will be important not to get on the wire when drilling holes.

Decorating wires behind sheets of drywall

If you are going to hang a TV on the wall, how you can hide the wires is something you should think about before you start. To carry out manipulations for decorating wires in plasterboard sheets, you should prepare:

• knife for cutting GVL;
• wire;
• rope or strong thread;
• nut;
• electrical tape.

Operating procedure

At the first stage, brackets are installed on the wall to fix the TV. The corners of its location should be marked with electrical tape; during work, this will allow you not to go beyond the zone that will be hidden. Now the technician will have to mark where the socket for connecting the device will be located. On the surface of the drywall you can mark for future holes. The installation area of ​​the socket must be marked to the nearest millimeter, this will allow it to be installed without creating voids.

To lay cables in the wall, cable channels should be made. Another hole is made in the lower part of the wall, through which the wire will be hidden in the plinth with the cable channel. The socket can be installed behind the TV, but this is only relevant when it is removed from the surface or installed on a movable bracket. In this case, the outlet will be easily accessible.

How to hide a wire from a computer

If you want to make the premises of your home more attractive, you should know how to hide wires from your TV and computer. In the latter case, the cords can be disguised under the table cover. At the same time, they are strengthened with the help of clips installed on self-tapping screws. If you plan to move the table in the future, you can use double-sided tape for this. When you don’t want to spoil the table, you can use a shoebox, having previously decorated it in an original way to match the interior of the room.

If you are wondering how to hide wires in an apartment, we can mask the wire using a special cover that you can make yourself. It is perfect for an extension cord into which all the plugs will be inserted. If you are constantly bothered by the cord from the speakers, then you can hide it in an appropriate case, which is pre-fixed to the back of the table.

Conclusion

Today it is quite common to install a TV on the wall. Many owners of apartments and houses wonder how to hide wires in the interior. Hole punching is one of the most reliable and aesthetic solutions. You can use an angle grinder for this. It will be necessary to go deeper into the surface only 1 cm. Tile adhesive is applied into the resulting gap, after which the wire is laid in the mixture and masked with tile grout.

If the wall is made of plasterboard or simply covered with finishing from this material, then you will need to make a rod from thick aluminum wire. It will serve as a broach, because with its help you can stretch a cable or wire behind the drywall on the wall. Many people wonder not only about where to hide the wires from the TV on the wall, but also about where to lay communications on the ceiling. The above technique is also suitable for a suspended system, which is most often made from plasterboard.