How to attach basement siding to the foundation. How to install basement siding with your own hands? Materials and tools

Siding is rightfully one of the most reliable building materials for protecting the foundation and walls from moisture, freezing and scorching sun. But, despite all its positive qualities, improper installation of panels can negate all efforts to create reliable protection for the structure. Let's talk about how to produce DIY basement siding installation so that the foundation of the building will last for many years.

Required Tools

Any type of construction involves the use of certain tools. We will need the following items:

Siding components

Step by step installation instructions for basement siding contains specific terms, or rather the names of individual elements of this material, which “cut the ears” of an ordinary person who has never encountered such work. Of course, it’s not worth talking about what siding panels are. But here's more about the rest:

We have listed only those elements that are necessary for installing the base. There are also chamfers, window and door trims and other details, without which it is impossible to cladding the facade of a building, but this is a completely different topic.

Stage 1 of siding installation - installation of sheathing

The panels must be fixed to a perfectly flat surface, otherwise all the siding parts may become deformed, which can negatively affect the condition of the foundation as a whole. If you plan to attach it to a concrete or brick base, then installing the sheathing cannot be avoided.

The sheathing can be constructed either from wood impregnated with a fire-resistant composition or from metal - it all depends on your capabilities and the climatic conditions of the area. In areas with a warm climate, you can fix the sheathing in the ground, in cold climates - only to the base at a height of approximately 12-15 cm from the ground level. The space created between the sheathing and the ground is usually covered with earth to give the structure a finished look.

The distance between the vertical slats should not exceed 91 cm; if this rule is not observed, add additional strapping every 40 cm.

Stage 2 – installation of the starting profile

The starting profile must be installed along a pre-drawn line, and it should be located 10 cm from the corner of the building. Its installation is carried out using nails in increments of 30 cm - to perform this operation you will need a level, because all parts must be fixed strictly horizontally.

Stage 3 – cutting of panels

First, determine how many panels are needed to cover the base. This is very simple to do: the total length of the wall in centimeters is divided by 112 cm. Remember that the final panel cannot be shorter than 30 cm!

Stage 4 – installation of the first panel

At this stage the immediate finishing with basement siding first tier of the structure.

As already mentioned, you need to move from left to right - set the angle of the first panel just below the edge of the starting profile, namely 2-3 mm. Push the first panel to the left - almost all the way to the outer corner, then apply sealant to its edge and fit it to the corner. Be sure to maintain the necessary expansion joints (gaps between siding elements designed to allow them to move relative to each other) and do not pinch the pins of previous rows.

Stage 5 – installation of the second row

Hammer nails or screw screws only through the substrate, and only at right angles. Each subsequent panel must be inserted into the starting profile and moved towards the very first panel. The remaining rows are installed in the same way - their number depends on the height of the foundation. If the siding is made in the form of stone or brickwork, then it is necessary to give a natural look - to do this, move each row by about 15-20 cm relative to the previous one.

Lower the panel down smoothly, under no circumstances pushing it to the previous level, so the fastening will be reliable and natural. Basement siding is equipped with special posts located on the back panels, called mounting pins. These parts are designed to protect the siding from deformation during temperature fluctuations, but not to secure it to the wall. Five or more fasteners can be installed on one panel, providing the required design freedom.

Nails or other fasteners should penetrate the surface at least 11 cm, or better yet, more, and to install them on the surface of the panel, you need to drill a hole with a diameter larger than the size of the nail shank.

Stage 6 – installation of internal corners

At this stage DIY basement siding must be firmly fixed to the inside corners of the building. For this, a J-profile or an internal corner is used - the second option is much simpler.

This or that element is securely fixed in the corner of the building, “falling” with one entrance into the already installed panels. Then you can continue to install the panels on the adjacent wall.

Stage 7 – installation of finishing board

The final step is necessary to install the finishing bead (fitting profile) on the last row of panels. Holes of a certain diameter are drilled in the profile, slightly larger than the size of the fastening rods. Then it is fixed to the surface of the foundation, bringing the edge of the panel behind it and fixing the whole thing with sealant. To bend the profile at the corners, it can be heated.

Actually, installing basement siding is not an easy job. But it’s quite possible to cope with it with two or three people – all you have to do is start.

Fastening plinth panels to the foundation is an original solution for creating additional protection and aesthetic appeal of the building foundation. Given the low cost and quick turnaround time, this finishing option is becoming increasingly popular. Using siding, you can prevent contact of the base with active reagents such as moisture, dust, and temperature changes.

Before attaching basement siding to the foundation, you should accurately understand the features of the use of this material in house construction and its technical characteristics.

Specialists in the field of house construction and decorative and protective design of the base choose siding as a facing material due to the variety of appearance of the material. Among the types of material presented on today's market, siding in the form of brick, wood chips and natural stone is in demand. This way you can create an effective foundation in the shortest possible time. The service life of the material is more than 50 years. Experts also advise using siding because it does not require maintenance for the entire period of use.

The material can be easily installed with your own hands without losing the effectiveness and quality of the material. Its versatility allows the siding to be used for installation on industrial buildings, commercial buildings, residential buildings and for the design of individual structural elements.

It is important to know how to install basement siding on the foundation. Despite the ease of installation, you can still make annoying mistakes that significantly reduce the effectiveness of the material.

Installation Guide for Basement Siding

The installation process of the material is divided into several stages, each of which is important and must be carried out with sufficient attention to detail.

Preparing the basement for siding installation

The quality of preparation of the supporting structure and the foundation surface on which the siding will be installed determines the effectiveness of the coating and its long-term performance. The service life of the material can be significantly reduced if the surface is prepared incorrectly or insufficiently.

First of all, the vertical wall must be level. To do this, use cement mortar. After tidying up the surface, you can proceed to installing the sheathing.

The optimal choice for the material that forms the basis of the sheathing would be a metal profile or wooden beams. Experts do not advise saving on lathing - it is better to do it with maximum responsibility, because it forms the strength of the future structure. Defects in the construction of sheathing lead to a subsequent reduction in the period of use of the material.

Basement siding installation technology

The sheathing is attached using a screwdriver, drill and connecting elements. Installation should be done carefully so as not to damage the integrity of the structure.

The procedure and rules for performing the work are as follows:

1. Installation of prepared siding panels should be done in the warm season. If you are forced to do work at sub-zero temperatures, then the slabs should be pre-warmed in the room. This is caused by the fact that siding expands when heated and contracts in sub-zero temperatures.
2. Installation of panels begins from the lower level. The first row is always located at the bottom, with the exception of certain mounting options, for which installation from the top row is recommended.
3. The siding is secured using special galvanized fasteners.
4. The base panel is inserted into the previously created initial guides. Mount it from top to bottom.
5. If a general pattern is applied to the panel, then you should ensure its exact connection.
6. The material is attached directly to the sheathing using nails and self-tapping screws.
7. After installing the starting panel, subsequent ones are attached to special grooves on the side of the previous one.

After creating a complete surface that completely covers the edge of the foundation, you can begin finishing the joining and corner areas. For this purpose, façade corners and special facing strips are used. With precise adjustment of all elements, it is possible to obtain excellent results in the shortest possible time.

Size and design selection

Siding manufacturers provide consumers with a wide selection of elements that vary in size. Experts consider the optimal length to be 1.0-1.2 meters - this size allows you to cover the foundation completely with a minimum number of connections. A width of 0.5 meters contributes to the speedy completion of the work. The fewer connections there are, the less likely it is for external factors to penetrate and come into direct contact with the base surface.

Siding can also be custom-made, in which a builder can make panels suitable for a specific project.

Now you know how to install basement siding on a pile foundation. The question remains: is it worth choosing this material for cladding? To do this, it is worth understanding the advantages and disadvantages of siding.

Pros and cons of the material

When choosing siding for cladding the base, you must accurately understand the characteristics of the material:

1. There are 2 types of siding to choose from – vinyl and polymer. It is the polymer version that is optimal for the base. It has a thicker profile and also has an additional protective coating that makes the structure resistant to fading in the sun.
2. High aesthetic component. Siding perfectly follows the contours and appearance of natural coverings. The precision of the connection of structural elements allows you to obtain interesting pictures and drawings.
3. Wide range of material use. A wide range of operating temperatures and humidity levels at which the material maintains its integrity and presentable appearance.
4. A special coating prevents the formation of mold and mildew on the material, which has a positive effect on the service life of the cladding. The protective layer also protects against damage by chemical reagents of various activities.
5. Siding is odorless and does not emit toxic elements, while its presence can significantly extend the service life and quality of the base itself.

The main disadvantage of siding as a material for cladding a foundation is its instability to contact with fire. It begins to melt quickly and fails completely. This creates certain restrictions for use in industrial facilities.

Siding justifies its technical characteristics and in the long term looks like an excellent investment and solution to many problems in preserving the foundation and its decorative design.

Basement siding with vinyl is used to treat foundations and walls. The material is easy to install, and if installed correctly, it is durable (service life of 50 years). Covering the foundation with siding is a way to create a beautiful façade of your home in record time. Paneling is done without the use of special tools; even a beginner can handle the task.

Description of material

Vinyl siding is made from polyvinyl chloride. Covering the foundation with basement siding is often done to imitate stone (natural or decorative), brick (silicate or red) and various types of wood. During the manufacturing process, the design is transferred from a prepared natural cast, resulting in the color matching the natural texture of the materials as closely as possible. Finishing the base with siding can be done using single-color panels; they can be easily painted on top in pleasant colors.

The best decorative look is created by simultaneously covering the base and walls. Processing panels of the same color is not always the best option; panels with imitation brick or stone on the bottom and wood on the walls go well. Depending on the purpose of the material, siding cladding is divided into basement and wall types. For the foundation, the sheets are thicker - 2.5-3 mm, and 1.5 mm panels are laid on the walls.

Siding is not only an environmentally friendly type of building decoration, but also very economical.

Basement work places increased demands on the material:

• high strength, since it will be affected by various negative influences and there is a risk of impacts;
• immunity to ultraviolet radiation. To prevent the casing of the base from fading with corrugated sheets, special components are added to the composition;
• high quality of raw materials and finished composition.

By combining the listed qualities, the durability of the material and resistance to various negative phenomena are achieved: temperature changes, mechanical damage, UV radiation, etc. Finishing the base with siding meets the stated requirements.

Basement siding is available in different sizes. Common dimensions (ratio of length to panel width):

• 1.22x0.47 m;
• 1.265x0.51 m;
• 1.13x0.47 m;
• 1.14x0.395 m;
• 1.15x0.52 m;
• 2.44x0.24 m.

Due to the variety of sizes, it is easy to choose convenient panel dimensions, and the material itself is quite cheap. Manufacturers guarantee the service life of the cladding for 50 years. If you install and maintain siding correctly, it will last another 50 years. Installation and installation of basement siding is carried out with your own hands, and subsequent care is limited to cleaning it from dust with a soap solution.

According to the installation method, types of basement siding can be horizontal and vertical

Due to the lightness of the material, it practically does not weigh down the building, therefore, reinforcement of the foundation is not required. The indicator is especially useful for processing the base of a house on screw piles, which are operated in conditions of watery or loose soil. Finishing a pile foundation with basement siding can be done with the additional installation of a heat-insulating film. The weight of 1 m2 of completed cladding material is only 3.5 kg. For comparison, artificial stone weighs 35 kg/m2, and facing brick - 190 kg/m2.

Covering the base with siding - pros and cons

Finishing the base with siding has become increasingly widespread due to the abundance of advantages of the material. It is ideal for covering walls and foundations.

Advantages:

• durability. Due to its resistance to most negative influences, the material retains its performance characteristics for a long time - 50-100 years;
• siding has high anti-vandal resistance;
• immunity to microorganisms;
• mechanical strength. The material can withstand various impacts due to the built-in metal base and dense finishing coating;
• weather resistance. Snowfalls, rains and fogs do not harm the siding. Operating temperature range from -50°C to 50°C;

Installing basement siding is not a particularly complicated process.

• weightlessness. The lightness of the material eliminates additional costs for strengthening the foundation and simplifies the installation process;
• possibility of additional insulation of the facade. Thermal insulation materials, including bulk mineral wool and thick foam plastic, can be easily placed under the coating;
• a wide range of. The variety of colors and textures leads to the possibility of creating a unique look. The most common option is siding the base with stone, but there are other types of imitation. Modern production technologies create a realistic pattern that is difficult to distinguish from the natural one;
• quick and easy repair. When comparing the time required for plastering, laying stone over siding will speed up the work by 2-3 times. Repair is carried out by simply replacing the strip;
• ease of work even with walls with complex geometry. Work with rectilinear facades is extremely simple; round or multifaceted buildings are a little more complicated.

If you install basement siding yourself, there are several disadvantages to consider:

• After the cladding, the dimensions of the building will be increased. Losses are 10-40 cm, depending on the presence of irregularities, the type of insulation and the design of the panels. If complex cladding with metal siding is carried out, this parameter is of little importance, but when processing the base separately, a further method of leveling should be considered;
• It is important to buy all additional accessories exclusively from branded manufacturers: fasteners, corners, starting levels. Be sure to purchase the material in reserve to eliminate the need for constant trips to the store;
• Panel cutting should be done confidently but with caution. It is recommended to use scissors with a hydraulic element, a grinder or a hacksaw. It is better to practice beforehand so as not to cause damage to large pieces.

Please note that facing a private house with siding involves the use of a large number of screws or nails

The development of skills occurs during installation; you can begin work without prior preparation. The benefits of the coating clearly outweigh the relative disadvantages.

Material calculation and purchase of additional parts

Do-it-yourself installation of basement siding is possible only with the correct calculation and preparation of materials. To determine the required amount of materials, the area to be processed is initially calculated using the formula: height * length.

Before covering the foundation of a house with corrugated sheets or any other material, you should find out the square footage of all areas and add them together. Next, the square footage of the material in the package is calculated. The resulting number shows the number of required packs without taking into account trimmings. You should buy siding with a reserve of at least 10%.

What else is needed to cover the base with siding?

For fastening products the following can be used:

• metal profile for vertical and horizontal lathing. To calculate, you should measure the length of the surface and, taking into account the dimensions of the profile, determine the quantity. The metal is fixed overlapping each other by 40-50 cm;

Installation of the sheathing begins with the installation of the planks you have chosen: wooden or metal

• self-tapping screws The basement siding must be secured with self-tapping screws; they will also be required during the installation of the sheathing;
• auxiliary elements: modules, sockets, corners;
• thermal insulation material. An optional but useful layer, usually the amount of siding is comparable to insulation;
• tools: screwdriver, grinder, construction knife, metal scissors, hammer, level, tape measure and ruler.

It is better to buy all the materials at one time so as not to be distracted from work to purchase small items. The cost of different types of siding varies widely. You can choose basement siding for either 400 rubles/m2 or 1200 rubles/m2.

How to prepare a house for siding installation

Step-by-step instructions for installing basement siding with your own hands always begin with the preparation stage. Application of building materials does not require careful or special preparation. It can be installed even on dilapidated shingle houses. Such walls cannot be plastered, it is forbidden to install any heavy cladding on them, so siding is the best solution.

To cover the walls, there is no need for preliminary stripping, plastering or priming; it is enough to check the evenness of the wall and the absence of protruding elements.

After inspection and removal of protrusions, a frame or sheathing is formed. Most often, the sheathing is installed using a metal profile or wooden beam. The manufacturer allows installation of the material directly on the wall, but it must have an ideal plane and consist of a material into which fasteners can be easily inserted.

From the outside, the profile strips are attached to the base using dowels and screws

If part of the house is being processed, it is necessary to make a metal sheathing; it will last longer, otherwise there is a risk of the wood collapsing before the siding fails. You can use not only a metal profile, but also wood with impregnation to protect against rot.

How lathing is done

Installation work should begin from the ground. The first profile is the most important; it is leveled and screwed to the wall at a distance of 5-10 cm from the surface. If a concrete blind area is installed around the perimeter of the building, you can begin installation directly from the level of the blind area. The metal is fastened with self-tapping screws screwed into the wall, if its material allows for a reliable connection.

The distance between the profiles depends on the purpose of the work. If you plan to lay insulation, the distance is calculated for comfortable installation of thermal insulation. For simple installation, it is recommended to install the profile in 50 cm increments to obtain even squares.

The greatest attention is paid to the corners. If desired, you can make a curly shape of the corners from the profile.

Installation instructions for basement siding

Installation procedure:

All plates are secured with self-tapping screws; they should not be screwed in too tightly. It is better to leave 1 mm to the surface of the panel to prevent deformation.

Installation of siding panels

Installation work should always begin from the left, moving to the right. The panels are inserted level with the previous element so that they rest against the groove. At least 5 screws are used for fastening: 4 in the corners and 1 in the center. It is important to monitor the integrity of the coating; any gaps will lead to wear and tear of the insulation and accelerate the destruction of the siding.

The application procedure includes several basic rules:

• the last row is always installed after installing the final beam;
• to prevent deformation and swelling, tension on the panels should be avoided;
• It is better to start application from the bottom;
• when installing panels under window sills, finishing strips should be installed first;
• If it is necessary to create holes for a gas pipe or heating, it is recommended to create a slot 6 mm larger than the diameter of the pipe.

Final finishing

The last stage of finishing is the finishing coat to give a finished appearance. The effect is achieved by installing corners, small modules and parts. At the top, the edge is closed with a drip - a special strip for draining water, which is installed on a sealant of the same color as the siding.

Conclusion

All of these steps require only care and precision; it is better to check the evenness and integrity of the coating several times. With the help of these recommendations, even a beginner can create plinth siding.

Have you bought a new living space and want to give it a nice and neat appearance, but are lost in the choice? Are you worried that the material will burn out or deteriorate due to temperature changes? Naturally, the choice is quite large. We will look at one of these materials - basement siding.

Our article will help you decide which basement siding to choose for yourself. In addition, you will learn how to finish the basement with siding.

What is basement siding?

Basement siding is a material that is used to cover different parts of the house. Its purpose includes cladding the entire facade, as well as its individual parts, from the bottom, and so on. This finishing method is good because it will protect your walls and base from environmental influences. Excellent appearance when installing basement siding is guaranteed. Your home will be transformed into a new penny in no time. One of the many advantages of siding is that it can be installed both outside and inside the building.

What does he look like? Externally, siding resembles panels that imitate brick or stone material. Its advantage is wear resistance and strength. The material does not lose its appearance when exposed to high or low temperatures, and also does not deteriorate from ultraviolet radiation. During production, special additives are used, thanks to which the material is able to withstand compression and expansion when exposed to temperatures, without losing its original appearance and color. If you install siding correctly and responsibly, this material can serve you for more than 40 years. It is also important that it will not even need painting with paints and varnishes. The material is light in weight, so the load on the walls and the entire structure will be small.

You won't see any seams. From a distance you might think that this is a solid coating. But according to people, there is a small minus. Due to the fastening system, siding consumption is quite large. You need to do good calculations. In addition, it is important to buy the right siding. After all, if you make a mistake with batches, the color or shade may differ from the previously purchased material. Thus, the color scheme will be incorrect, which will ruin the look. Be careful with siding lot numbers.

Tools for installing basement siding

To begin with, you need to take care of the tools that will be used to install the material. Listed below are the main tools for finishing a building with basement siding:

• perforator;
• U-shaped profile;
• a lot of screws;
• paranitic gaskets;
• a lot of galvanized nails;
• circular circle;
• Bulgarian;
• plastic dowels.

One of the main decisive criteria on which most people choose siding is based on the fact that installation does not require heavy surface preparation or special tools. That is why siding is done even on old premises. Moreover, siding perfectly updates the building. Old walls are difficult or very expensive to putty, but siding is easy to use and looks quite beautiful.

Installation instructions for basement siding

The material is installed on the lathing structure. On average, the size of the panels is 50x120 cm. If you plan to install siding on the entire facade, then, at your request, you can additionally insulate the walls.

If you are starting to install basement siding, then know that the sheathing can be fixed in different ways. For example, if you are sheathing the entire house, then you need to install the fastenings in a vertical position. If only the base, then in a horizontal position. The distance between the vertical gratings should be more than 90 cm. If it is a vertical arrangement, then approximately 46 cm.

Also, before starting work, remove the trim. It is equally important to clean the surface from contaminated areas and the effects of the old coating. If your home has wood siding on the exterior walls, you need to make sure that it adheres tightly and securely to the surface. After all, with unreliable connections, it is difficult to achieve the desired result.

Note! An antiseptic should be used to treat the walls. Only then can you begin finishing the surface of the walls.

The steel lathing must be made from a U-shaped profile. Fastenings should be carried out on hangers - these are porous galvanized metal parts. You can also use brackets, because they are much stronger.

You should start fixing the siding from both edges at once. At the marking points you need to make a hole with a puncher. Then dowels are inserted into the drilled holes, only after that can the bracket for the profile be installed. Below is a diagram of the installation of basement siding.

When installing the bracket, you will have to place a paranitic gasket between it and the finishing wall. What does this give? Thus, a thermal break is created, which will prevent the formation of cold in the wall. If you plan to insulate the facade, use an insulation board before installing the main profiles. For this method, you need to make holes opposite the original brackets, then you need to install the plates. The same technology can be taken as a basis before installing windproof membranes. And to the brackets that are located at the edges, you need to fix the profiles for the sheathing. A string or thread should be pulled into the free space between the brackets. You will use it as a guide to align the remaining profiles.

To rigidly connect the profiles to each other, use connections with a jumper of the main profile. They should be positioned perpendicular. They are made from a profile, or more precisely, from its scraps. In addition, you can see in the video how to install basement siding with your own hands.

Do-it-yourself basement siding installation

Step by step method:

This step-by-step instructions will help you in your work. Installation of basement siding video.

Council of masters. Approximately five joints or nails should be provided per plinth panel. They need to be screwed into the holes provided for fastening. They are in the siding board.

How to care for basement siding

The interesting thing is that natural materials are difficult to care for. But basement siding is easy to maintain, the main thing is to do it on time. Everyone knows that after some time of use, the material begins to lose its original shine. Therefore, you need to perform certain procedures in order to return the siding to its original appearance. All its parts are exposed to the environment, the influence of heat and ultraviolet rays, as well as dust and dirt.

The coating must be washed and maintained regularly. For convenience, use a hose. If you wish, you can use water with added detergent. Sometimes a strong downpour comes to the rescue, which slightly cleanses the surface of the material from contaminants. However, even after it, stains remain, spoiling the whole look.

When some time has passed, it becomes clear that soapy or plain water from a hose cannot restore the original appearance of the material. In this case, you should resort to special care methods, after which you can see a good result of your labor-intensive efforts.

Use a car brush to thoroughly clean basement siding. You need to start cleaning basement siding from top to bottom. Do not skip any sections, be responsible, and allocate enough time for this process. If you notice that some areas of the siding are dull in color, add a little laundry detergent.

Do not use a hard brush, as this may damage the surface of the material. If you notice fungus on the surface, use liquid bleach. When there are stains that cannot be removed using the methods described above, use a special vinyl cleaner.

Bottom line

As you can see, basement siding is an excellent solution that will help you keep the basement intact and decorate your house. Detailed video instructions on how to mount the material yourself are below.

general information

Dachny basement siding is installed on the sheathing. It is fixed horizontally over the entire surface of the walls, individual bars are installed around the openings of windows and doors, along the upper and lower edges of the cladding, and at the corners of the building (vertically). For the lathing, wooden blocks of 40x40 cm are used. They are pre-impregnated with an antiseptic and fire retardant. Wood moisture content is up to 20%. For the first row, the distance between the bars is 43.5 cm for facade panels of the “Wild Stone” series and 42 cm for the “Large Stone” series. Subsequent bars are fastened in increments of 44 cm. Insulation can be placed between the sheathing bars, and other insulating elements can be placed underneath them.

The façade panels are high. To make the cladding more rigid, Westmet employees recommend installing additional horizontal slats between the main sheathing bars. When installing bars and slats, check the correctness of their position horizontally and vertically. They should form a flat plane.

Fasteners for facade panels - nails or self-tapping screws made of galvanized steel. The length of the leg is such that it fits into the sheathing bars at least 3 cm. The cap is wide, 9-10 mm, the leg is 3 mm.

Fastening and its components are carried out through perforation holes (made along the edges of each element). The leg of the fastener must fall strictly into the center of the hole and enter perpendicular to the plane of the cladding. It is not allowed to hammer nails or screw in screws at an angle, skew, or bend them.

The facade panels are not fixed rigidly: the fastener must fit in such a way that a temperature gap of 1-1.5 mm remains between its head and the surface of the basement siding (see Fig. 4). Each panel is fixed at least at five points.

Country base siding is made of polypropylene and can slightly change its linear dimensions when heated by sunlight or cooled in winter. To avoid deformation due to temperature changes, compensation gaps are left between the ends of the row panels and the components during installation. If work is carried out in summer, the gap is 5-6 mm. At negative temperatures it is increased to 9-10 mm. Installation is possible at temperatures down to -10° C. When carrying out work in cold weather, the basement siding is first kept warm for 10 hours (in a heated room, but away from heat sources).

Fastening vertical profiles, corners, slats starts from the top. The leg of the fastener should be located at the top edge of the hole so that the element hangs on it. The remaining fasteners are placed in the center of the holes (see Fig. 6). The fastening step is no more than 25 cm.

The order of fastening row panels on the main surface of the walls is shown in Fig. 3. They are placed horizontally, starting from the bottom row, moving from left to right.

Installation of basement siding Dachny

The cladding elements are installed in the following order:

• starting bar;
• corner elements, auxiliary profiles;
• ordinary panels.

Installation of the starting strip:

• located along the lower edge of the cladding, along the entire perimeter of the building;
• fastened strictly horizontally (checked by building level);
• interrupted by 30 mm at the edges at the corners of the building 30 cm from them to avoid temperature deformations (Fig. 1);
• The mounting lines of the planks are checked at each corner (must be on the same level, coincide);
• the bar is placed at the level of the first bar of the sheathing;
• fastening is carried out in increments of 30 cm.

If the foundation line is uneven, cladding is performed without installing a starting strip. To do this, the panels are cut at the bottom. Holes similar to perforation holes are drilled in their lower part. The panels are attached to the wall material.

Installation of external corners:

• at the corners of the building, the cladding is assembled from several corner elements installed one above the other;
• The lower outer corner is attached first. It is installed on the starting bar, nails are driven into the upper perforation holes at their upper edge or screws are screwed in;
• the second and subsequent corners are inserted into the locks of the lower element and secured at the upper edge (Fig. 2.);
• each of the corner elements is attached at least 6 points (three screws or nails on each side);
• the fasteners should not press the corners tightly against the sheathing (a gap of 1-1.5 mm is left between the head and the surface of the cladding). The corner elements should move slightly - this will protect them from deformation due to temperature changes.

Installation of internal universal corner:

• installed at the junction of walls approaching each other at right internal angles;
• attached to the sheathing through perforations in the same way as an outer corner;
• The façade panels that fit the corner are fixed in its grooves, as shown in Fig. 5.

J-profiles can be used as a frame for door and window openings and a finishing strip (see Fig. 6, 7).

Installation of row panels:

• the first row is installed on the starting bar;
• the panels are connected to each other and to the starting strip using L-shaped locks (located on the inside);
• The first panel is inserted into the starting strip with its lower edge, moved to the corner, leaving a temperature gap. The next panel is inserted in the same way and connected to the previous one using grooves (see Fig. 2, 3);
• The first and last panels in a row are installed with preliminary trimming. It is performed at right angles so that the seam lines in adjacent rows do not coincide, and the last panel in the row is longer than 30 cm;
• the remaining scraps can be used as the beginning or end elements of subsequent rows;
• Before trimming, the panels are assembled in a row; fastening with nails or self-tapping screws is not performed. Mark cutting lines;
• if the edge of the panel goes under the outer corner, it is cut at a right angle in place.

After finishing is completed, additional elements (canopies, shutters, etc.) can be installed on the façade. To install them, holes similar to perforation holes are drilled in the basement siding. They are placed so that the fasteners fit into the sheathing bar.

For facade panels "Wild Stone"