How to decorate a gas pipe in the kitchen. How to hide a gas pipe in the kitchen - solutions in examples How to cover a gas pipe in the kitchen

One of the main concepts modern renovation can be stated this way: all communications must be invisible. Everything is hidden under finishing or in other ways - from water risers. But how to cover gas pipes with plasterboard, and is it possible to do this? You can hide it, but according to the rules and regulations of use gas appliances under no circumstances is it possible. Minimum "tight" covered with plasterboard gas pipes are threatened with a fine, or, at most, a shutdown of supply.

There are many options for solving this problem, everyone usually decides for themselves how the pipe with the riser will be hidden, but how to do this using?

What can be done with gas pipes and risers without resorting to plasterboard structures:

1. Hanging furniture with a cutout for a highway will cost more, since you will have to do individual order on the closet.
2. Decorate under one of the design elements, for example, a tree trunk.
3. Elementary to match the overall tone of the kitchen design.
4. Contact the gas service with a request to move the riser from the kitchen.

Such solutions have their drawbacks. It is not always possible to hide gas pipes in wall cabinets, since their location can be very inconvenient.

Design options for hiding a gas pipe

To do this you will have to contact gas company and change the position of the pipe, and this is due to unnecessary costs. Painting and decor also do not always fit into the design, and the presence of taps on the riser will simply ruin general form. Is it possible to solve such a problem using plasterboard structures, without violating the maintenance rules?

Solution - plasterboard box

The gas pipe in the kitchen can be closed in, but leaving access to the main line, connections and taps. This design is very easy to assemble with your own hands using standard and or.
Example of a box from moisture-resistant plasterboard for a gas pipe Any available or planned material can be used as lining of the box:, or. It is worth remembering that it is important to provide access to the highway. It will not be possible to completely hide the pipeline by closing it “tightly”.

To gain access to gas pipes and risers, you will need to plan and assemble either a removable hatch, which will be finished with the same materials as the entire kitchen, or hang a door.

If the pipe is located horizontally, it can be hidden in, leaving the entire bottom part highways. Moreover, with finishing in the general tone of the kitchen, it will be possible to hide or fit such a closing box into the concept of renovating the room.

Kitchen design with a closing box


Drawing for placing a box for a gas pipe made of plasterboard Utility services in this case, use is allowed similar designs. These options solve all problems at once.

• the box will camouflage the gas pipeline well, hiding it from view;
• All taps will be within direct access;
• the structure will be ventilated, which in case of leakage will prevent accumulation gas mixture and provoke its explosion.

1. Drywall. It is best to use a moisture-resistant type of sheet in the kitchen; it perfectly withstands moisture and prevents the formation of fungus, due to the antiseptic additives contained in the composition.
   
2. Metal profiles. You need to buy and. It is better to choose from leading manufacturers with a wall thickness of 0.5–1 mm and a good zinc coating.
   
3. Fasteners. Black, 18–20 mm long, clamps for connecting metal frame parts to secure guides.
   
   
4. , And . The box will need to be covered with a primary layer of finishing material for further decoration. It is best to purchase universal mixtures rather than separate starting and finishing mixtures. Perforated corners at the same time, they are needed to level and strengthen the edges of the structure.
   
5. Hammer or drill. Used for drilling holes for mounting guide profiles, you should take care good drills required diameter. Moreover, if the house is block or panel, then it is best to use a hammer drill.
6. Screwdriver for screwing in self-tapping screws. You can replace it with a drill with variable speed control, but this is not very convenient.
7. Roulette for marking.
8. Spatulas for applying putty to the finished box.
9. Decorative materials are chosen according to individual taste and in accordance with the design of the room.

You also need to buy one, but it will be completely replaced by a regular stationery one with a spare set of blades. Full list necessary equipment selected by individual requirements. So, how to assemble the box and close it gas pipe in the kitchen?

Read also

How much weight will it bear? wall plasterboard

Work algorithm

Almost any plasterboard product is assembled on a frame, which is then sheathed with material. The walls around the gas pipe must first be prepared and marked. All old trim and furniture must be removed, cleaning all surfaces. If there are dilapidated and fragile areas, they need to be restored. After that, they begin to mark the lines where the guide profile will be mounted, from which the base will be assembled.

The process of marking a wall for installation of a plasterboard box

1. According to the markings, the CD guide profile is fixed, through which holes are drilled for mounting dowels-nails. The spacing of the attachment points is 250–300 millimeters. It is worth remembering that the type of dowel is selected according to the wall material. If they are made of soft aerated concrete, then so-called “crocodiles” are needed.
   
2. Rack profiles cut to the required sizes are inserted into the guides and they are connected together with clamps.
3. External corners are again made from UD guide profiles, connecting two at a time, with shelves facing each other. Small ones are suitable as fasteners. Diagram of an external corner for a plasterboard box
4. Corner guides are mounted to the racks, connecting along the way with bugs.
   
5. To ensure the rigidity of the entire box, it is worth inserting several transverse (or rather, longitudinal profiles). They are cut to size and the side shelves are cut to the required length. These parts are also attached to the resulting structure with self-tapping screws.
   
6. To fasten hatches or doors in order to have access to the inside of the box, wooden inserts can be placed in the guide rails; they are fixed with self-tapping screws or press washers. An example of fastening a door in a plasterboard box
7. Drywall is cut to the size of the edges of the resulting box and attached to the frame. When screwing in self-tapping screws, you need to control the pressing force on the screwdriver so that the head of the fastener does not break through the cardboard. But, in this case, the attachment points should be slightly “recessed” into the surface by 1–1.5 mm.
   Attaching drywall to a false wall frame in the kitchen
8. and glued with serpyanka. You need to putty all the places where the screws are screwed in. When plaster mixture dries, it is rubbed down sandpaper with grain fraction 120–160.
   
   
9. Next, you need to glue the profiled corners on the edges of the box and plaster the entire surface. Ready under decorative finishing such a box will appear after the final grouting of the dried plaster mixture.
   
   

Watch the video: how to hide pipes in a drywall box.

Thus, niches are also assembled onto horizontal pipelines, leaving the lower planes uncovered. After decoration, such a box will fit very well into the overall design of the kitchen, hiding communication lines.

Takes ~3 minutes to read

In any kitchen area, where applicable gas stove, supply pipes will be used. Such engineering Communication spoil appearance premises, cause irritation among residents. If the water supply and sewer system can be easily disguised, then you will have to tinker with the gas lines. There are certain standards for handling such communications. Next, we’ll figure out how to hide a gas pipe in the kitchen without harm to residents, in accordance with legal acts.

Save

What do the regulations say?

Before making a decision regarding camouflage of a gas pipeline, you need to understand the requirements regarding the operation of such pipes in a private house or city apartment. This is what the legal acts say:

• The user must ensure unobstructed access to the lines to eliminate gas leaks and carry out repairs. Failure to comply with such standards can cost human life.
• It is forbidden to close the pipe tightly, for example with a box. This will allow fuel to accumulate, which will ultimately increase the likelihood of an explosion. It is not recommended to hide utility lines in the wall structure. To do this, you need to use decorative ventilated products.
• It is prohibited to replace pipes and other gas pipeline elements yourself. This must be done by a qualified specialist.
• Pipelines need to be painted. A layer of paint prevents metal corrosion and extends the life of the pipeline.
• Cannot be hung on pipes heavy objects or try to repair them in the event of a breakdown or gas leak.

By doing repair work Be sure to turn off the supply valve. Do not try to make the kitchen interior ideal; when choosing decor, follow the recommendations of a gas specialist.

Save

Painting

The cheapest and in a safe way masking the gas pipeline is considered to be painting. At the right approach disturbing parts can be disguised as general interior kitchens. Any person, even those not associated with the construction industry, can perform such operations. During the work, the pipe remains in the same place, and the specialist’s access to the pipeline is not difficult. Paint internal pipeline can be in any chosen color; yellow paint is used to protect external utilities from corrosion.

There are several painting methods:

• Using pigment dyes that match the tone of the walls. If the shades match, the interfering detail will not stand out against the general background; it will simply merge with the enclosing structure.
• Using contrasting colors in relation to the general background. This option is typical for saturated pastel colors kitchens. It will be good if the engineering communication repeats some element of furniture, for example, kitchen set or curtains. This non-standard solution can be used in avant-garde or kitsch style. When using a minimalist or high-tech interior, the pipe is painted with metallic paint.
• In some cases, decoupage (painting) is used, especially if there is an ornament (vegetation, images of dishes, geometric patterns) in the room or on any interior items. Similar designs can be applied to pipes; hand painting or stencils are used for this. If you have drawing skills, the pipeline can turn into a beautiful birch tree or bamboo trunk.

Acrylic or Oil paint, as well as nitroenamel. Before application decorative covering it is necessary to turn off the gas and thoroughly clean the surface with sandpaper. After this, apply a layer of primer; when the primer dries, begin painting the product with the selected color. Ideal option will use paint from a can, but some users use a regular paint brush for this purpose.

Save

Using railing for camouflage

Regulatory documents prohibit hanging heavy objects on the pipeline, but this element can be successfully disguised as a hanger for kitchen appliances. Railing is a product on which hooks, shelves and holders are attached.

The essence of the method is to paint the pipe to match the color of the hanger. The railing may have a copper or bronze surface; some products are made with a special chrome coating. A real hanger is mounted slightly below the gas pipeline. All cutlery is placed on the railing, and the communication itself will look like an integral part of the system. This is especially true for modern style interior

Save

The nuances of masking pipes over furniture

Not every user knows how to hide pipes in the kitchen if they are at a height. In this case, a shelf is fixed under the gas pipeline and various kitchen utensils are installed there. Such items will hide utility lines from prying eyes, but the installation of the shelf must be carried out with special care so as not to accidentally damage the pipeline. The pipe itself must be hidden against the background of the wall; it is painted the same color as the enclosing structure.

To further disguise the gas pipeline, you can place it behind cabinets or other furniture. IN in this case the user must comply with all safety requirements, ensure normal ventilation and unobstructed access to the pipe. A similar method is used to mask horizontal sections of utility lines.

How to hide a pipeline behind a kitchen facade

Kitchen furniture allows you to disguise horizontal and vertical sections of pipelines, as well as some gas equipment, for example, columns or counters. It is better to install the kitchen facade during renovation work; for this, order a false cabinet the right size or modernize existing furniture.

Before closing the pipes in the kitchen, you need to make holes in the facade from its lower and upper parts. Inner space The cabinet will not only hide the gas line, but will also be used for its intended purpose, for storing cutlery and kitchen utensils.

The main condition for such camouflage is considered to be sufficient ventilation of the space, which will prevent the accumulation of gas during a leak. To do this, several holes are made in inconspicuous places, but they should not be blocked by pots or jars. The ideal way out of the situation would be to install a grille. Vertical pipes are usually hidden in a pencil case, and horizontal pipes are placed in a cabinet. The main condition for such camouflage is unhindered access to utilities.

Save

Is it possible to disguise a pipe in a box?

The above methods allow you to disguise the pipe, but you will not be able to hide it from prying eyes. If you want to hide the gas line, then you need to make a decorative box. To ensure maximum safety, you must follow these rules:

• Part of the box must be removable, which will provide access to utilities if necessary.
• IN protective structure It is necessary to provide a grille or perforation to ventilate the space. If this is not done, a possible gas leak will provoke its accumulation and explosion.

Many users ignore these requirements and build a sealed box. They believe that a thick sealed pipe will not be able to pass gas. This statement may be correct, but this design does not meet safety requirements. The first inspection of the gas service will reveal discrepancies. The owner of the apartment will receive a fine and will be required to release utility lines from such a box. It’s better not to create problems for yourself and make the camouflage element in accordance with all the rules. The decor of the box can be anything; it must have a removable grille.

• We make markings on the wall and determine where to attach the metal guides. When designing the structure, it must be taken into account that the width of the product must be sufficient to service the pipeline.
• We install the steel frame using a building level.
• We cut out pieces of the required size from a sheet of drywall.
• We fix the drywall to the frame, and attach a removable decorative grille to the box.

If you only need to hide the pipes, then the box can be made from wood or any other suitable material. After constructing the frame, a metal grid is attached to the guides; the part is fixed using a screwdriver and screws.

Polycarbonate is often used to construct the box. A part of the required width is cut from a whole sheet. In places in the middle of the rigidity lines, cuts are made and the element is bent so that the product receives the outline of the P symbol. Several holes are drilled in the box for ventilation, then it is fixed to the wall.

Instead of drywall, wood or polycarbonate, sheets of plywood can be used to construct a decorative box, organic glass, plastic and wooden lining. Any panel is suitable for making available material, but it must be removable, provide ventilation and be easy to remove. Available for sale various designs to disguise gas pipes, they are quickly installed on the wall surface and just as quickly dismantled. The main advantage of the box is the ability to mask the pipeline, but this product occupies a certain area.

A gas pipe in the kitchen can ruin the visual beauty home interior. Depending on the style, location, kitchen layout and much more, there are different ways closing the gas pipe.

Photo of a gas pipe in the kitchen and basic masking methods

1st option- covering the gas pipe with furniture.

This method is considered convenient and practical. Optimal solution— built-in furniture with a special wall cabinet or pencil case. The cabinet should not have a back wall. Pros - quick access to gas meters, safety precautions are observed.

2nd option- close the gas pipe plasterboard construction. This method is the most common. Because it is economical, simple and visually aesthetic. The disadvantage of this use is that safety precautions are not followed, the pipe is difficult to access, and there is unnecessary overlap of area, which is not suitable for small kitchens.

Video: Installation of plasterboard construction

3rd option— masking with a chipboard box. Lightweight design, a simple way to close, suitable for small kitchens and any set. Most often, this method is used if the gas pipe runs in close proximity to the stove.

Option 4- disguise various decor. Depending on the design and imagination, you can decorate the gas pipe with the most different ways- cover it with stones, cover it with a chrome pipe, wood, magnets and more. The main thing is that this design is combined with the interior of the kitchen.

Option 5- paint the gas pipe regular paint. This is the most cheap way closing the gas pipe. The paint is chosen depending on the color of the furniture or walls in the kitchen.

The owners of those houses and apartments that have relatively recently connected the gas supply know that the design of the kitchen is hopelessly spoiled by the laid pipe, meter, clamps and other elements of the gas pipeline. Therefore, a completely logical question arises: how to hide a gas pipe in the kitchen, how to make it “fit” into the overall picture and not attract unnecessary attention?

In fact, there are several simple, but very effective solutions this problem. Our article will tell you about them.

Brief description of possible solutions to the situation

So, you can close a gas pipe in several simple ways, and these are the methods:

• With help kitchen furniture. Today, manufacturers of such furniture are aware of these problems, so they can make special cabinets to order with cutouts in the back wall or without these walls at all, that is, furniture with voids. This method is good because the design is preserved, the furniture is available, the pipe is hidden, but it is also easy to access;
• Making a box or false cabinet. This box is made from plasterboard. It may look like a horizontal cabinet, but its purpose will be purely aesthetic. This method is good because, unlike the previous one, the cost of all the work will be much lower. And in the case when kitchen furniture is already available and it is quite expensive to buy additional cabinets, then working with drywall becomes the only option;

• Use of special decorative metal screens. The screens used are the same as when it is necessary to hide heating pipes;
• Painting pipes is the simplest and cheapest option. As a rule, they are painted to match the wallpaper or trim on the kitchen walls, in general, so that the pipes “fit” into the overall design as much as possible.

Advice! Before working with gas pipes, even of this type, it is recommended to consult with the gas service, since not all materials that are often used in finishing are safe.

It must also be said that closing the gas pipeline completely is also not recommended, since with the slightest leak, gas will accumulate in a closed space, which can lead to very serious consequences in the future. unpleasant consequences.

Working with drywall

So, we should consider in more detail all the options proposed above. And the most popular one can be considered this one - making a box.

Necessary materials

There is nothing complicated about the work itself. But the presence of some tools and materials is required:

• Drywall is moisture resistant. The kitchen is a place with high humidity, especially if it is not equipped with a hood. Therefore, the sheets must have a protective layer;
• Metal profile (rack-mount);
• Screwdriver;
• Self-tapping screws for drywall (for metal 25 or 32 mm);
• Grinder, hacksaw, metal scissors, stationery knife, that is, any cutting tool;
• Writing instrument.

It must be said right away that it is much more convenient to cut the drywall itself with a stationery knife.

Manufacturing process

So, the box is made in the following sequence:

• Definition exact dimensions that the box must have to close the pipe;
• Next, a profile called perimeter is attached to the walls behind the pipe. It will serve as the basis for securing the drywall. Attach the perimeter to the walls using self-tapping screws or dowel nails. If the walls are made of wood, then ordinary self-tapping screws will do, but if they are made of brick or concrete, you will need dowels. Fastening is carried out in increments of 50-60 cm, or less frequently, since the entire box will have a fairly light weight;
• Next, pieces of the required size are cut from sheets of drywall. You can find out the dimensions quite simply - measure the distance between the fixed profiles;
• The cut sheets are placed on the profiles and attached to them using self-tapping screws. The screws are screwed in so that the head is recessed into upper layer sheet by 1-2 mm. In this case, the fastening step of 40-50 cm is observed. Fastening begins from any corner and moves evenly in both directions from it. Self-tapping screws are screwed in at least 1 centimeter from the edge of the sheet;
• After this, the box must be finished.

So, we can say that the first, easiest part is done. Now all that remains is to hide the structure itself, which hides the pipe, no matter how punish it may sound.

Indeed, drywall is not finishing material, so it itself needs finishing.

It all starts with eliminating all the cracks and sealing the fastening points with self-tapping screws. This can be done better and easier with putty. All joints are sealed with putty. In addition, it would not be superfluous to apply thin layer putty on the entire surface of the drywall.

Now you need to wait some time for it to dry. When this happens, its surface is treated with sandpaper in order to eliminate all surface defects, making it perfectly smooth.

After this, all dust generated as a result of previous actions is removed from the working area and primed.

After the primer has dried, the surface is subject to final finishing. This could be painting or decorative plaster, and wallpapering, and other types of finishing finishing works. There is plenty to choose from for each specific design.

In terms of technology, this is probably the simplest method; all that is needed is to correctly indicate the dimensions to the manufacturer of the kitchen furniture. As already mentioned, today manufacturers are aware of this problem and have encountered it more than once, which is why there are problems with manufacturing special furniture does not arise for each individual case.

The vertical parts of the pipe are hidden behind cabinets, and the horizontal parts are hidden behind simple shelves.

After production, all that remains is to hang all the cabinets in their places.

A different situation arises when the furniture is already there, but the pipe needs to be hidden. In this case, in rear walls They simply cut holes for the gas pipeline. This, of course, solves the problem, but it is unlikely that such furniture will be mounted in another place, since there will be holes cut out in its walls.

Advice! Under no circumstances should the pipe itself be used to secure it to individual elements furniture.

Kitchen renovations always raise many questions, the solution of which will help create a cozy and comfortable environment. It is very important to equip the kitchen with a sufficient number of sockets, replace plumbing and sewer pipes. All these elements will be hidden in furniture or walls.

In many apartments and houses where gas is the source of cooking, the big issue is the gas pipe, which can pass through almost all rooms. According to safety regulations, there are certain standards for its location, so it is not possible to simply move it to another place. Therefore, the question always arises of how to hide the gas pipe so that it does not spoil the overall interior.

Some features

Hiding it is actually not as difficult as it might seem at first glance. There are many options that will allow you to effectively close unwanted objects.

The gas pipe in the kitchen can be hidden under the furniture. If it runs at a height, it is worth ordering wall cabinets with special recesses or cutouts in which the gas pipe can be freely located. This option allows you to leave access to it, and it will not be visible from the outside.

The second option could be a false box. This design will serve a purely aesthetic function. At the same time, all main elements of the system remain open, as required by safety regulations.

The most economical, but less effective, method is painting. To ensure that it does not stand out too much against the background of the wall, it is worth using the same paint color as the wall near which the gas system runs.

There are others, more effective options in order to hide the gas system.

Return to contents

Plasterboard construction

When creating an interior in the kitchen, the gas pipeline system can become a big obstacle. It can become an obstacle to the normal arrangement of furniture or prevent normal installation household appliances. Solving this problem is real, all you need is desire.

You may be interested in: How to update and decorate your kitchen?

The most effective method is to create a plasterboard box. In order to create such a design, you need to prepare:

Scheme for decorating a gas pipe with a plasterboard box: 1 – frame made of steel profile, 2 – casing made of plasterboard sheets, 3 – stiffener made of steel profile, 4 – utility pipes.

• plasterboard sheets, for the kitchen it is better to use moisture-resistant ones;
• metal profile;
• screwdriver for securing elements;
• self-tapping screws, it is better to take them with a reserve;
• scissors for cutting profiles, a knife for cutting drywall.

You can purchase all the tools and materials without any problems at any hardware store.

Before you start installing the structure, you need to take measurements and carry out calculations. The box should not be too bulky, but if necessary, there should be access to the gas pipe. We install a metal profile structure. It is very important that it is securely attached to the wall. Everything is covered with plasterboard sheets.

This structure must be prepared before facing. Putty is used for this. It is very important to tape all joints plaster mesh, it will increase the strength of the putty layer. Any material can be used as a facing material, the main thing is that it matches the entire interior.

Advantages of a plasterboard box:

• good appearance;
• ease of installation.

Disadvantages of a plasterboard box:

• such a design may take usable area, this will be especially noticeable in a small kitchen;
• safety precautions may be violated, since the gas pipe is partially closed and access to it is complicated;
• if inspection or repairs are required gas system, such a structure will be completely dismantled.

Return to contents

Kitchen furniture as a disguise

The gas pipe can be decorated with kitchen accessories.

You can hide the gas pipe in the kitchen without any problems in the kitchen furniture. Vertical pipes can be easily placed in vertical cabinets, and horizontal pipes can be easily placed along the cabinets. This option will be possible if the furniture is made to order. This is when all communications are taken into account.

You may be interested in: Partition between your kitchen and living room

In this way you can hide and gas meter, it will be located in a wall cabinet. If you plan to place it in such a cabinet geyser, it is important to equip a very good ventilation system. Otherwise, this method of masking the heating system cannot be used.

It is important to remember that hanging any furniture or furniture on a gas pipe is strictly prohibited. It is also very important to check the distance between it and the wall cabinets if they are located above the pipe.

Under no circumstances should any pressure from above be applied to the pipe. Therefore, when fixing the cabinets, it is very important to make sure that they are a little higher.

Quite often, a gas pipe can run along the entire wall, moreover, through the apron area, and cover it with furniture or plasterboard box impossible. In this case, you can use a technology such as railing.

Railing is a system designed for hanging various dryers, shelves and other small items. In this case, the pipe will protrude structural element the entire railing system.

In order to make a rail from a pipe, it must be sanded to a shine and coated with paint with a chrome plating effect in several layers. After this you need to secure it over it various hooks for towels, kitchen equipment, interesting shelves for spices. It is very important to place such elements above the pipe; under no circumstances should they be installed on the gas pipe itself, this is unacceptable due to safety regulations.