How to insert staples into a bison stapler. How to fill and charge a stapler with paper staples? How do you open the large and small paper stapler to insert staples? How to refill a construction stapler

A stapler is a universal thing. It will always be useful not only in professional, but also in home environment. Nail insulation, cover the greenhouse with film, change the upholstery of furniture or secure a cable - the possibilities for application are wide. There are so many pistols on the market today, it's not always easy to know which one is best. But it is important to understand this issue, because different types pistols are used in different ways. The device, the type of tool, the size of the staples - your head can spin.

Pistols can be divided into several groups:

• mechanical;
• electrical;
• pneumatic.

Use of mechanical staplers

Typically, a simple mechanical device is used in everyday life. In another way it is called a construction stapler. If you need a tool for one-time use (upholstering a greenhouse), then it will be quite enough. It can be made of plastic or metal. Plastic is cheap, but breaks quickly. Metal is more reliable and a little more expensive. Which one is more suitable, you need to decide for yourself.

What if the choice fell on mechanical construction stapler? How to use? Very simple.

Tips for using a mechanical stapler:

Operation of electrical appliances

Most often, electric staplers for furniture are used for reupholstering interior items and other large-scale repair work. They differ from mechanical ones by having more massive charges. Their service life is longer. And it’s easier to use electric ones. This furniture stapler costs several times more than mechanical models.

People often ask a question about a furniture stapler. How to choose? There are many options here. Electric staplers differ in the following parameters:

How to insert staples into an electrically powered furniture stapler? The scheme is simple. Just find the button on the back of the gun and pull out the sliding bar. Then load the staples with the ends down and push the gutter. It is important to follow safety precautions.

Pneumatic construction staplers

Differences from mechanical and electrical devices:

Staplers are useless without staples. And the “cartridges” differ in many ways. Manufacturers themselves produce all kinds of shells for staplers.

Material:

Hardness level:

• Simple - suitable for working with malleable materials.
• Solid - used to interact with dense materials such as plastic and wood.
• Hardened - for the most stubborn surfaces.

An important point will be sharpening the ends of the staples. Spicy? They will get clogged much easier.

• Flat ones are the most popular types of staples; there is a very large selection of them.
• Semicircular - more often used to secure cables.
• Pins (look like the letter "T") are used to hide the fasteners. The most inconspicuous ones.

Each stapler has its own type of staples. The marking is indicated on the pistol box or on the body. It is important to use only staples that match the markings, otherwise the device will work by shooting several fasteners or not work at all.

What to do if the gun does not release staples:

Safe work techniques

Using a mechanical stapler.

By following safety precautions when using the device, you will avoid unnecessary injury. And the device will last longer:

When working with an electric or pneumatic stapler, you must follow the safety rules described for mechanical tools. More important:

Mechanical, electric or pneumatic staplers are easy to use. But it is important to use the tool correctly. You need to charge it with fasteners with the markings indicated for your model. It is also necessary to adjust the mechanism for the required strength driving in staples. The main thing: follow safety rules when using. Careful handling and accuracy in use are the key to productive work with any stapler.

A stapler (translated from English as “stapler”) is a necessary thing in the office. A stationery stapler is designed for quickly fastening sheets of paper using metal staples.

Types of staplers

Staplers are divided into several types: according to the number of sheets that can be stitched simultaneously.

Mini stapler

Compact model that can be put in your pocket. Staples from 10 to 20 sheets. Staples for mini-staplers come in different sizes: 10, 24/6. The design and color of the case is very interesting: colored, transparent, there are devices that look more like a toy than a stapler itself.

Desk stapler

The stapler is quite compact, does not slip on the table and does not leave scratches on it, as it has a rubber sole. Stitches from 10 to 50 sheets. Standard staples are used: 10, 24/6-8.

Booklet stapler

A specialized stapler with adjustable stitching depth. Equipped with a ruler for ease of use. Sews brochures, catalogs and newspapers along the fold of the pages. Designed for different numbers of sheets, works on different staples.

Printing or typographic stapler

The most powerful stapler. Stitches archives, voluminous stacks of paper. Used in government agencies, libraries, clinics. On average it stitches up to 250 sheets. Designed for both standard staples and specialized ones.

Antistapler (destapler)

Designed to remove staples from paper. The anti-stapler is often built into the stapler itself; it extends from the back of the stapler and uses a pointed tip to pry up and remove the staple. But it looks much more original on the table small item, resembling a frog, which firmly grips the staple on both sides. Anti-staplers come in the form regular knives for paper with a curled tip.

Stapler-plier
A plier is a special stapler in the form of pliers; it can be used outdoors. Plyer is used by florists when packing bouquets; it is suitable for attaching labels or labels to fabric.

Tucker

This is an “installation stapler”, made in the form of tongs. Hammers staples like nails. Used for pinning announcements and posters. Interestingly, many desktop staplers found today perform the function of a tacker.

Staplers also vary in the type of staples that are used with them.

Stapler No. 10

Designed for fastening a small number of sheets, usually up to 15 sheets of standard weight paper.

Stapler No. 23

The most powerful stapler.

Works with 23 types of staples. Depending on the length of the leg of the staple used, it fastens up to 260 sheets of paper.

Staplers No. 24

A universal stapler that staples both small quantities (1-2 sheets) and large quantities (20-30 sheets).

What to look for when choosing a stapler

. Staples

There are always two numbers written on the staples, for example, 24/6 - what does this mean?

The first number is the staple type. This is a conventional unit, which includes the staple width, cross-sectional dimensions and wire steel grade (caliber) defined for this standard.

The second number is the height of the leg. It is measured in millimeters. The greater the height of the leg, the large quantity sheets can be stapled. The thickness of the bracket increases in proportion to its height. To determine maximum thickness sheets to be sewn, subtract 3-4 mm from the length of the legs for their bend.

When choosing the length of the staple leg, remember the main rule - 2/3 of the leg should be in the material being fastened, and 1/3 will hold the material being attached.

A high-quality staple is made from cut wire (equal in diameter on any segment) - then all staples will be equal. A quality staple has pointed ends that allow it to pierce paper easily.

What material should I choose for the bracket? For fastening thick paper and large stacks, we recommend using staples made of steel wire, as it is stronger than galvanized iron. By the way, all staples with a leg height of 10 mm or more are made of steel.

The quality of the staples is related to the reliability of the stapler, so if you buy a quality stapler, then it is worth purchasing the corresponding staples.

. Internal organization stapler

The internal mechanism of the stapler is very great importance and will affect the operation of the device.

The stapler motor system is driven either by a spring or a special metal plate. What's better? The plate is more practical: it lasts longer and provides softer sliding, and the spring has a habit of stretching. The stapler tongue is made of metal (more durable) or plastic (provides smooth feeding of staples).

. Case and design

Pay attention to the material from which the stapler is made - its durability depends on this. Metal body more reliable in operation and look very impressive. But plastic also has advantages: it is lighter, more convenient for transportation, and more pleasant to hold in your hands. Models with combined cases are very convenient: metal + plastic, metal + rubber, metal + plastic + rubber.

The color of the stapler depends on the size and specific application.

The more powerful the stapler, and the more functions it performs, the more subdued its color.

. Power and depth

The characteristics of a stapler always indicate the punching power (or volume of fastening) - how many sheets or millimeters of paper the stapler punches. As a rule, it is taken into account office paper for printing with a density of 80 g/m2.

The punching depth is the distance from the edge of the paper to the punching point. The depth of firmware in mini-staplers is 35-40 mm, in desktop staplers - from 50 mm or more.

. Package

The packaging will always tell about the quality of office supplies, be it a stapler or staples for it. In addition, the product itself must have markings indicating the country of origin, company and type of bracket used. Sometimes a package of staples is included with the stapler.

. Paper

Thickness standard sheet office paper - 80g/sq.m. It is worth considering that depending on the thickness of the sheets being stapled, the power of the stapler will also vary.

How to charge a stapler

Before you load your stapler, determine the size of staples that will fit it.

The number of the staple used in a particular stapler is written on the packaging.

Bend the cover of the stapler. It is connected by a spring to a plastic element that presses the staples against the opposite edge of the metal groove into which the staples are placed. Opening the cover will pull the spring, followed by a plastic element, thus freeing up space for new staples.

Take one section of staples and place them in the metal groove, ends facing down. Close the lid and click the stapler once to test. If a staple with concave ends falls out of it, it means everything is working, but if this does not happen, or the staple is bent incorrectly, repeat the procedure or change the stapler.

← go back

Mechanical stapler allows you to nail plastic panels, clamps for lining, fabric for furniture, wooden or plastic surfaces.

There are three types of staplers: mechanical, electric and pneumatic.

Mechanical staplers are affordable, compact, lightweight, and easy to maneuver. Below we will only talk about them.

How to choose a stapler?

In short, it is not advisable to buy the cheapest options, and also plastic models. Metal tool more powerful and reliable.

Choose professional models that have an adjusting screw (thumb) at the top. It helps regulate the force with which the tool will pierce the material.

Many people forget

Before work, adjust the adjusting screw according to the material of the surface you are going to work with.

If it is hard plywood, strong penetration of the material will be required, therefore, it is worth setting a high force. If it is a loose surface, the force must be reduced so as not to break through the fabric, or for example pvc panel which you are targeting.

During operation, it is recommended to press the lever with one hand and press the adjusting screw with the thumb of the other hand. Then the recoil will be minimal and the load will be distributed evenly in the stapler. You will be able to nail the brackets much better.

How to insert staples into the receiver

The design of all mechanical hammers is almost the same. There is a lever handle, which is used to press, and at the bottom of the stapler there is a metal plate that opens the receiver. This is where we have to load the staples.

Before you buy braces from hardware store, you need to find out which size is suitable for your device. As a rule, the size and type of suitable staples are indicated on its body.

For example, the body of our stapler indicates a width of 12 mm and a depth of 6-14 mm. This means that you will only be able to charge staples in this range.

Parentheses less than or bigger size will not fit the receiver. The size of the staples in millimeters is also indicated on their packaging.

To insert projectiles into the stapler, you need to open the metal plate on the back surface.

To do this you need to take it big and index finger on both sides, then pull it towards you and slightly downwards. Thus, we press the metal tab on the back surface of the plate, and pull out a metal spring, similar to the one found in a regular office stapler.

If there are any staples left in your stapler, they will fall out once the spring is pulled out. If they are not there, then it’s time to install new ones for further work.

The staples are inserted into the receiver (the hole is in the “P” position).

How many shells will fit?

Now a little about how many shells fit into a stapler. Staples are sold in small rows. The row can be divided into several parts yourself by slightly breaking it with your hands.

The tool is filled with 1-1.5 rows. 2 rows rarely fit in the bin, so if there is a lot of work to be done, it is better to prepare half rows before starting work.

What to do if a bracket gets stuck

It is worth noting one more very important point, which will help you in your work.

How to fill a staple gun with staples

It happens that the staples become bent and get stuck in the exit hole. They cannot be hammered into the surface and cannot be pulled out by hand.

In this case, we will need to pull out the feed magazine completely.

This option exists for almost all professional staplers.

First you have to re-open metal plate and remove the spring.

This will remove the entire feed magazine that was in the tool.

You will see a jammed staple that can now be easily pulled out by hand.

Putting the stapler back together is not difficult: the entire pulled out block returns to its place with a press.

You should hear a click when you do this. Don't forget to replace the spring afterwards.

Not just parentheses

Some staplers can work not only with staples, but also with studs various forms. The designations of what the stapler works with are indicated on its body or in the instructions.

I tuck the nails into the stapler in the same way as with staples, but you need to be careful after pulling out the spring. A row of nails must be loaded along one of the outer edges of the letter “P”, and not inside this very letter!

If you want it to produce two nails side by side when working with a stapler, load the second row along the second outer edge. Next, the spring is inserted and the stapler is closed.

Stapler, how to charge a construction stapler?

Very often in construction there is a need to connect parts. This is done using nails or staples. At the modern level, a tool such as a stapler is used. There are many types of this tool, but in all of them the principle is the same - fastening with staples. The stapler can be charged by itself when they run out.

How to refill a stapler

They, just like the stapler, are sold at any hardware store or construction markets. There are features that you can see in this video.

To paste new block staples in a construction stapler, remove the clamping bar, which is located in the rear part from the bottom
Next, insert the staples with their paws down and insert the clamping bar again. In order for the stapler to work without interruption and not to hit two or three staples at once (you must admit that this happens to many people), you need to use only those staples that are recommended by the stapler manufacturer.

A mechanical stapler allows you to nail plastic panels, clapboard clamps, fabric to furniture, wooden or plastic surfaces.

There are three types of staplers: mechanical, electric and pneumatic.

Mechanical staplers are affordable, compact, lightweight, and easy to maneuver. Below we will only talk about them.

How to choose a stapler?

In short, it is not advisable to buy the cheapest options, as well as plastic models. Metal tools are more powerful and reliable.

Choose professional models that have an adjusting screw (thumb) at the top. It helps regulate the force with which the tool will pierce the material.

Many people forget

Before work, adjust the adjusting screw according to the material of the surface you are going to work with.

If it is hard plywood, strong penetration of the material will be required, therefore, it is worth setting a high force. If it is a loose surface, the force must be reduced so as not to break through the fabric, or for example the PVC panel that you are shooting.

During operation, it is recommended to press the lever with one hand and press the adjusting screw with the thumb of the other hand. Then the recoil will be minimal and the load will be distributed evenly in the stapler. You will be able to nail the brackets much better.

How to insert staples into the receiver

The design of all mechanical hammers is almost the same. There is a lever handle, which is used to press, and at the bottom of the stapler there is a metal plate that opens the receiver. This is where we have to load the staples.

Before you buy brackets at a hardware store, you need to find out what size will fit your device. As a rule, the size and type of suitable staples are indicated on its body.

For example, the body of our stapler indicates a width of 12 mm and a depth of 6-14 mm. This means that you will only be able to charge staples in this range.

Smaller or larger brackets will not fit into the receiver. The size of the staples in millimeters is also indicated on their packaging.

To insert projectiles into the stapler, you need to open the metal plate on the back surface.

To do this, you need to take it with your thumb and forefinger on both sides, then pull it towards you and slightly down. Thus, we press the metal tab on the back surface of the plate, and pull out a metal spring, similar to the one found in a regular office stapler.

If there are any staples left in your stapler, they will fall out once the spring is pulled out. If they are not there, then it’s time to install new ones for further work.

The staples are inserted into the receiver (the hole is in the “P” position). Next, insert the spring back, closing the metal tab. That's all, the tool is charged and ready to go!

How many shells will fit?

Now a little about how many shells fit into a stapler. Staples are sold in small rows. The row can be divided into several parts yourself by slightly breaking it with your hands.

The tool is filled with 1-1.5 rows. 2 rows rarely fit in the bin, so if there is a lot of work to be done, it is better to prepare half rows before starting work.

What to do if a bracket gets stuck

It is worth noting another very important point that will help you in your work. It happens that the staples become bent and get stuck in the exit hole. They cannot be hammered into the surface and cannot be pulled out by hand.

In this case, we will need to pull out the feed magazine completely.

This option exists for almost all professional staplers.

First you will have to repeat the opening of the metal plate and pull out the spring.

This will remove the entire feed magazine that was in the tool.

You will see a jammed staple that can now be easily pulled out by hand.

Putting the stapler back together is not difficult: the entire pulled out block returns to its place with a press. You should hear a click when you do this. Don't forget to replace the spring afterwards.

Not just parentheses

Some staplers can handle not only staples, but also studs of various shapes. The designations of what the stapler works with are indicated on its body or in the instructions.

I tuck the nails into the stapler in the same way as with staples, but you need to be careful after pulling out the spring. A row of nails must be loaded along one of the outer edges of the letter “P”, and not inside this very letter!

If you want it to produce two nails side by side when working with a stapler, load the second row along the second outer edge. Next, the spring is inserted and the stapler is closed.

A mechanical stapler allows you to nail plastic panels, clapboard clamps, fabric to furniture, wooden or plastic surfaces.

There are three types of staplers: mechanical, electric and pneumatic.

Mechanical staplers are affordable, compact, lightweight, and easy to maneuver. Below we will only talk about them.

How to choose a stapler?

In short, it is not advisable to buy the cheapest options, as well as plastic models. Metal tools are more powerful and reliable.

Choose professional models that have an adjusting screw (thumb) at the top. It helps regulate the force with which the tool will pierce the material.

Many people forget

Before work, adjust the adjusting screw according to the material of the surface you are going to work with.

If it is hard plywood, strong penetration of the material will be required, therefore, it is worth setting a high force. If it is a loose surface, the force must be reduced so as not to break through the fabric, or for example the PVC panel that you are shooting.

During operation, it is recommended to press the lever with one hand and press the adjusting screw with the thumb of the other hand. Then the recoil will be minimal and the load will be distributed evenly in the stapler. You will be able to nail the brackets much better.

How to insert staples into the receiver

The design of all mechanical hammers is almost the same. There is a lever handle, which is used to press, and at the bottom of the stapler there is a metal plate that opens the receiver. This is where we have to load the staples.

Before you buy brackets at a hardware store, you need to find out what size will fit your device.

How to refill a construction stapler

As a rule, the size and type of suitable staples are indicated on its body.

For example, the body of our stapler indicates a width of 12 mm and a depth of 6-14 mm. This means that you will only be able to charge staples in this range.

Smaller or larger brackets will not fit into the receiver. The size of the staples in millimeters is also indicated on their packaging.

To insert projectiles into the stapler, you need to open the metal plate on the back surface.

To do this, you need to take it with your thumb and forefinger on both sides, then pull it towards you and slightly down. Thus, we press the metal tab on the back surface of the plate, and pull out a metal spring, similar to the one found in a regular office stapler.

If there are any staples left in your stapler, they will fall out once the spring is pulled out. If they are not there, then it’s time to install new ones for further work.

The staples are inserted into the receiver (the hole is in the “P” position). Next, insert the spring back, closing the metal tab. That's all, the tool is charged and ready to go!

How many shells will fit?

Now a little about how many shells fit into a stapler. Staples are sold in small rows. The row can be divided into several parts yourself by slightly breaking it with your hands.

The tool is filled with 1-1.5 rows. 2 rows rarely fit in the bin, so if there is a lot of work to be done, it is better to prepare half rows before starting work.

What to do if a bracket gets stuck

It is worth noting another very important point that will help you in your work. It happens that the staples become bent and get stuck in the exit hole. They cannot be hammered into the surface and cannot be pulled out by hand.

In this case, we will need to pull out the feed magazine completely.

This option exists for almost all professional staplers.

First you will have to repeat the opening of the metal plate and pull out the spring.

This will remove the entire feed magazine that was in the tool.

You will see a jammed staple that can now be easily pulled out by hand.

Putting the stapler back together is not difficult: the entire pulled out block returns to its place with a press. You should hear a click when you do this. Don't forget to replace the spring afterwards.

Not just parentheses

Some staplers can handle not only staples, but also studs of various shapes. The designations of what the stapler works with are indicated on its body or in the instructions.

I tuck the nails into the stapler in the same way as with staples, but you need to be careful after pulling out the spring. A row of nails must be loaded along one of the outer edges of the letter “P”, and not inside this very letter!

If you want it to produce two nails side by side when working with a stapler, load the second row along the second outer edge. Next, the spring is inserted and the stapler is closed.

Using a stapler without any nails, you can fasten materials of small width and density. This is an indispensable tool in office, construction and furniture industry. In this article we will figure out how to insert paper clips into a stapler.

Stationery staplers

These tools are very simple and are designed for the average person who is not versed in technical “troubles”. Everything is simple here. You fold back the top cover and the spring with the clamping mechanism moves back. You insert the clip with the tips pointing down and close the lid. The clamping mechanism returns to its place, and the tool is ready for use again.

Those interested can watch a video in which the boy shows how this is done correctly.

Construction staplers

They are more massive and have a slightly different structure, although the operating principle is the same. The spring clamping mechanism pushes the clip holder towards the striker; after each actuation, the next clip takes its starting position and, as a result of pressing the spring key, the striker drives it into Right place, thereby pressing the next sheet of cardboard with a paper clip to the wall, the material to the wood from which the frame is made upholstered furniture, or only for the formwork of the future concrete foundation. Let's figure out how to insert paper clips into a construction stapler.

Wrong option

The mistake many people make is that when the stapler runs out of staples, they pull back the two-sided tabs of the frame lock, open it and try to insert the next clip of staples through the front side impact mechanism. As a result, with an awkward movement, the spring mechanism continually throws the clip back, and it flies many meters away, after which you have to search for it for a long time. Often the clip can fly into the eye of the unlucky “stapler operator”. Here is a video that shows what not to do, although the operator himself is not aware of it.

Correct option

The right way how to insert paper clips into a construction stapler or furniture variety is to press the back of the holder spring mechanism paper clip feeder, release its groove from the lock hole and pull it out completely. Afterwards, you can even insert more than one clip into the frame and return the spring of the mechanism to its place, thereby ensuring its uninterrupted operation for a long time. Here's a video of how to do it correctly.

You should open the frame as in the first, incorrect case only when one of the paper clips gets stuck in the exit slot.

We hope you found our article useful. Enjoy your “recharge”!