How to install a tap into a plastic barrel. How to install a tap into a barrel - features of the operation. Features of installation work

Many summer residents and car enthusiasts have more than once encountered the use of large cans or barrels. Therefore, they probably know how inconvenient it is to handle, drain or pour liquid, especially if they are filled to the brim. Decide this problem Installing a drain valve will help. In this article we will provide useful recommendations, regarding how to embed the crane into metal barrel or plastic canister.

Why use a drain tap?

Drain valve - incredible convenient device, because thanks to it you can drain the liquid without any problems, without the need to lift or turn over the container. The process itself is carried out carefully, the liquid does not splash, which in most cases is very important.

The procedure for inserting a tap into a barrel cannot be called simple, but any home craftsman can easily cope with it. But it is certainly worth noting that the material from which the container is made is of great importance. That is why below we will give examples of how to embed drain valve in plastic and iron barrel. Try to follow the described recommendations, since its performance and service life largely depend on this.

How to install a faucet into a metal barrel yourself?

Before cutting the faucet into a metal barrel, mark the location of its placement, preferably so that it is located as low as possible. The main thing is not to overdo it, not to do it on the bottom, since such an insertion option greatly reduces the functional properties of the structure and requires the installation of a special pedestal.

Prepare the following materials for work:

1. A squeegee is a threaded pipe.
2. Tap. For such purposes, as a rule, shut-off ball valves are used. It is important that its pipe has an internal pipe thread, so that it is convenient to screw the tap onto the squeegee.
3. Locknuts. They will be useful for fixing the squeegee.
4. Sealant and FUM tape. They are necessary for sealing connections.

Important! All these materials are inexpensive, so this operation will not affect your family budget. Before starting tapping, be sure to remove rust and dirt. inner surface barrels.

Insert the tap according to this diagram:

• Don't forget to mark the location of the drain. Use the most ordinary compass for this.
• Then drill a hole at the indicated point.

Important! If necessary, you can widen it a little using a round file so that it matches the diameter of the squeegee.

• Screw on the locknut from the short thread side of the outlet. Insert it into the prepared hole from the outside.
• Install a second locknut from the inside.
• Wrap FUM tape around the free part of the thread and coat this area with a thick layer of silicone pipe sealant.
• Tighten the connection thoroughly. Apply as much force as possible so that the walls are slightly deformed at the point of compression.
• Screw the shut-off valves to the outlet and check the functionality of the system.

How to equip a plastic barrel with a tap with your own hands?

Now it's time to look at how to embed a tap into a plastic barrel.

Important! It is recommended to perform this procedure using a special gun and thermoplastic glue. If you do not have such tools at hand, you can insert using threaded connection. Only then will you have to take care of proper sealing of the joint.

You need to do the following:

• As in the previous case, mark and drill a hole on plastic barrel for tap insertion.

Important! You can use sharp knife or scissors if the plastic is soft enough.

• Prepare the mortise tap. On the thread side, install a large metal washer and rubber gasket for waterproofing.
• Apply a thick layer of sealant to the washer and gasket.
• Insert the inlet pipe into the hole, put a washer and rubber gasket on the other side of the thread. Treat all joints with sealant.
• Screw the nut onto the thread from the inside.

As a rule, such containers have a narrow neck, so problems arise with screwing the nut on from the inside. If you come across just such a barrel, then use a fitting equipped with a flange on one side. Complete all steps in the following order:

• Make a hole in the container according to the diameter of the fitting.
• Secure the fitting to a metal wire to make it easier to push it into the prepared hole from the inside of the canister directly through the neck, then pull out the wire.

Important! Don't forget to tie a limiter to the wire on one side.

• Before placing the fitting in the hole, lubricate the area where the flange meets the barrel wall with sealant.
• Insert the wire through the neck into the hole and pull the fitting out. At the same time, try to hold it with wire. Then screw the locknut onto the thread from the outside, having first put a rubber gasket on it and treated the joint with sealant.
• Screw the shut-off valve onto the fitting.

Important! To make your canister more convenient, cut an additional neck into it on the opposite side. This will allow the water to drain evenly.

Anyone who has ever used barrels or huge canisters knows how uncomfortable it is to drain liquid from them, especially if they are filled to the top. To simplify this task, it is possible to improve the container, in particular, to embed a drain valve into it. Below we will look in detail at how to embed a tap into a barrel so that the container does not lose its tightness.

Non-specialized information

The drain valve is a very ergonomic device, since thanks to it the container does not need to be turned over or lifted. In addition, draining is carried out carefully, without splashing liquid, which is also very important in some cases.

Inserting a tap into a barrel is a relatively simple procedure that anyone can do home handyman. The only thing to emphasize is that this process strongly depends on the material from which the container is made.

Based on this, below we will look at how to embed a tap into a metal barrel and a plastic container.

Drain insert

In an iron barrel

Place the drain as low as possible. But this should not be done at the bottom, since such an insert will significantly reduce the functionality of the structure and will require a special pedestal for it.

The following materials will be useful for insertion:

The price of all these materials is not high, so the costs for this operation are minimal.

Note! Before you start inserting the drain, you should clean the inner surface of the container from dirt and rust.

So, the instructions for performing this work look like this:

• Before cutting the tap into an iron barrel, you need to mark the location of the drain. To do this, you can use a simple compass.
• After this, you need to drill a hole in the indicated place.. If necessary, the hole can be enlarged with a round file. The main thing is that it matches the diameter of the drive.
• Then, from the side of the small thread of the drive, screw on the lock nut, after which it is inserted from the outside into the prepared hole.
• Then you need to tighten the second locknut from the inside.
• Wrap fum tape onto the free part of the thread and apply liberally silicone sealant for pipes
• Then you need to carefully tighten the connection. This must be done with force so that the wall deforms at the point of compression.
• Now all that remains is to screw the shut-off valves to the squeegee and check the functionality of the system.

This completes the process of inserting the drain with your own hands.

In a plastic barrel

Now let's look at how to embed a tap into a plastic barrel. It is best to perform this procedure using a hot-melt gun and hot-melt glue.

If there is no similar tool, then inserting the tap into a plastic barrel can also be done using a threaded connection. The only thing in this case is to take care of sealing the joint.

This is done as follows:

• As in the previous case, before cutting a tap into a plastic barrel, you need to mark and drill a hole. If the plastic is soft, the hole can be cut with scissors or a sharp knife.
• After this, you need to prepare a mortise tap for the plastic barrel. To do this, it is necessary to install a huge iron washer and a waterproofing rubber gasket on the thread side.

• Then you need to apply sealant to the gasket and washer, as shown in the photo.
• Then the inlet pipe of the device must be inserted into the hole and, in addition, put a rubber gasket and washer on the thread, treating the joint with sealant.
• To finish the work, screw a nut onto the thread from the inside.

Usually the container has a narrow neck, as a result of which it is impossible to tighten the nut from the inside. Under such conditions, a fitting with a flange on one side is useful.

Work under such conditions is performed in the following order:

• First of all, it is necessary to make a hole in the container according to the diameter of the fitting.
• After this, the fitting must be secured to an iron wire, which will allow you to push it into the hole from the inside of the canister through the neck and then pull out the wire. To do this, it is possible to tie a limiter to the wire on one side.

• Before inserting the fitting into the hole, the area where the flange meets the wall of the container must be lubricated with sealant; in addition, a rubber gasket can be used.
• Then the wire is pushed through the neck into the hole and so the fitting is pulled out. Holding it with wire, screw the locknut onto the thread from the outside, after installing the rubber gasket and treating the joint with sealant.
• At the end of the work, you need to screw the shut-off valve onto the fitting.

Advice! In order to make the canister more ergonomic, it is possible to cut a second neck into it, on the opposite side to the first. Under such conditions, the water will drain evenly.

This completes the insertion process.

Conclusion

Inserting a tap into a container does not require a huge investment of money and effort, but at the same time it makes it much more ergonomic to use. The only thing is to do this operation carefully, adhering to the above recommendations, so as not to break the product.

From the video in this article it is possible to glean some additional information on this topic.

In this article we will talk about how to make a tap in a plastic barrel using the simplest shut-off valves which can be purchased at any plumbing store. But before we begin this simple task, let’s decide what is the need to equip the container with drainage mechanisms.

Currently, purchasing a plastic container for 200 liters or more does not seem to be problematic. These useful containers can be used to accumulate and store water intended for watering a summer cottage for landscaping summer shower etc.

However, there is a problem: plastic containers, most often, are not equipped with drain mechanism. At the same time, the price of a barrel with an already installed tap is high, and therefore it’s time to learn how to make an adjustable drain with your own hands.

So, how to install a tap on a plastic barrel and what is needed for this?

We select the necessary fittings and consumables

Before attaching the faucet to a plastic barrel, let's decide what is needed for this.

In addition to the barrel itself, you will need a special fitting, tight gaskets to seal the connection and shut-off valves that will fit the design of the fitting.

A mortise fitting with a seal is a type of fitting designed to seal a pipe or flexible hose to plastic or metal containers.

Fittings of this type, presented on the market, are divided into polymer and metal products based on the type of production materials.

• Metal fittings for insertion are made of of stainless steel or made of brass. Such fittings are good for corrosion resistance, strength and durability.

Important: When purchasing mortise fittings, avoid purchasing low-quality, cheap products, as such fittings are often made of silumin.
As a result, after literally a couple of months of operation, such an insert will become unusable, since the material used in production will crumble.

• Polymer fittings for hermetically sealed devices, they are most often made of polyethylene.

The advantage of polyethylene products is their elasticity. As a result, even if the nut is overtightened, it will not crack and will ensure the required tightness.

Important: Polymer tapping devices are not designed for installation in containers with a volume of more than 100 liters, since they can withstand pressure of no more than 4 atmospheres.

Choosing best option From the range of products on the market, we pay attention to the end of the mortise fitting. To install full-fledged shut-off valves, we need a product with a threaded end. If a plastic barrel is used to collect water used for irrigation, you can use a fitting with an end designed for fixing a flexible hose.

Now we know what we need to purchase for insertion, but before inserting the faucet into a plastic barrel, we need to select suitable shutoff valves.

The valve must match the diameter of the fitting end. In addition, it is desirable that these devices are made of the same materials. That is, it is advisable to install shut-off valves made of similar materials on a brass insert. The same is true for stainless steel products.

For the operation of plastic barrels in domestic conditions, two types of taps are relevant:

• traditional modifications with one rotary valve are a universal, easy-to-install solution, the price of which is low;
• ball valve "American" - optimal solution for arranging a summer shower and similar structures where the shut-off valves are located motionless.

Features of installation work

So, now a few words about how to install a tap in a plastic barrel.

Instructions for carrying out installation work simple:

• At the bottom of the plastic container we make a mark at the location of the upcoming insert.
• We insert a drill into the electric drill, the diameter of which is 1-1.5 mm larger than the diameter seat fitting.
• We drill a hole and clean its edges from burrs and irregularities.

• Next, remove the union fixing nut from the fitting and leave one sealing ring.
• We insert the prepared fitting into the hole from inside the barrel.
• Next, we put an O-ring on the outer part of the fitting and attach a fixing nut.
• Now, holding the mortise device from the inside of the barrel, tighten the union nut from the outside.
• After the installation is completed, we begin installing the shut-off valves. We select the valve in accordance with the diameter of the fitting. When screwing the tap onto the insert shank, use a second wrench to hold the union nut.
• Upon completion of installation, water is poured into the container and the tightness of the connection is checked. If no leaks are found, the installation can be considered successful.

Now that we know how to attach a tap to a plastic barrel, let’s take a closer look at the operating features of such structures.

Features of application

Plastic container with installed drain fittings- This is a useful structure in everyday life that can be used to satisfy various household needs.

Among the application possibilities we note the following:

• Installations for watering plants are simply irreplaceable in rural areas and on summer cottage. Often, due to the lack of a connection to the water supply, well water is used for irrigation, which is accumulated in barrels. Again, a special 200-liter container can be placed under the drain and thus collect rainwater.
  An important condition for the effective operation of irrigation systems assembled on the basis of barrels with a tap is the difference in levels. In other words, the barrel should be located an order of magnitude higher than the end of the watering hose.
  In this case, the movement of water by gravity will be ensured and, as a result, the creation of pressure. To do this, the container is installed under the roof overhang on a pedestal about 1.5 meters high. The barrel is held drainpipe, along which it will flow rainwater. The tap is installed at the bottom of the barrel walls or at the bottom.
• The summer shower is arranged in a similar way. The container is mounted on a frame, which serves as a booth.
  An insert is made in the bottom of the barrel and a fitting is installed on which a tap and strainer are attached. The second insert is made in the upper part of the container. This fitting is attached to flexible hose, through which water will be supplied from the water main or from a well using a submersible pump.
  The logic of using this design is that the filled container heats up under the sun for a certain time, transferring heat to the water. Thus, having filled the container in the morning, after lunch you can use water heated to approximately +50°C.

Conclusion

Now we know how to screw a tap into a plastic barrel and how to use the result for its intended purpose. All that remains is to purchase the necessary fittings and do simple installation work.

Still have questions that require clarification? In this case, more useful information can be found by watching the video in this article.

Plastic barrels are widely used in various fields activities - can be used for storing and transporting oils, fuels, chemical substances and other liquids. But if the container is used in everyday life as storage tank for water, it becomes necessary to screw a tap into it so that it is convenient to use the contents.

Technology for installing a tap in a barrel with a large hole using an “American” coupling

One person cannot cope with the task on his own; if the barrel is even 200 liters, he will need an assistant. The following materials are needed:

• American coupling straight 3/4 inch with internal and external thread;
• valve with external thread;
• screw;
• 2 rubber gaskets;
• 2 washers of suitable size (you can make homemade ones from plastic).

A hole is prepared in a plastic barrel using a drill with an 18-19 mm drill bit. The “American” should not fit into it freely, but should be screwed in with some effort.

The assembly sequence is as follows:

1. the “American” is assembled and a tap is screwed into it;
2. A plastic washer and a rubber gasket are placed on the coupling from the external thread side;
3. the assembled structure is tightly inserted into the hole on the barrel;
4. inside the container, a gasket is put on the “American”, and then a washer;
5. the nut is attached and securely tightened.

For more effective sealing the junction between the inside and outside of the barrel can be treated with silicone sealant.

The sequence of installing a tap in a barrel with a narrow neck using a fitting

For this method, you will need a fitting with external threads on both sides (without a flange in the middle) or a regular short-length tube with a continuous external thread. On one end you need to put an elastic gasket, a washer and screw the nut to the middle (if a tube) or all the way (if a fitting).

A hole is drilled in the barrel. A strong rope is taken, passed through the neck and released into the tap hole. A prepared fitting is put on the rope, and any limiter is tied to its edge, which will fit into the narrow neck of the container, but will stop in the fitting (tube).

The rope with the fitting must be pulled from the side of the hole for installing the faucet very carefully so that the washer and gasket do not fall off. After the device gets into the slot, a gasket and washer are put on the tube (fitting) and tightened tightly with a nut. The tap is screwed onto the remaining thread.

Do you need a reliable water container in your garden? One of the options is a Eurocube, in which it can be accumulated and then used as needed. It is interesting because it holds 1000 liters of water, it is compact and easy to install, as it is made of durable polymer. All that remains is to install the drain faucet for the Eurocube with your own hands. There is nothing complicated about this, except for some nuances, which we will talk about throughout the article.

First, we will analyze the container itself in detail - what it is, where it is used, what it is, and then we will install a crane suitable for the Eurocube. Our task is to help establish water supply in a suburban area.

What is a Eurocube

This is the name given to a polymer container made in the shape of a cube.

Through use durable material, the product has become widespread:

• on construction sites;
• at car washes;
• in the oil and chemical industries;
• in everyday life.

To protect the polymer structure, an external metal grill is used, and a tray is also installed below it, increasing the protection of the product. Thanks to this, the Eurocube can compete with other stronger and more expensive containers.

Weight finished design is approximately 60 kg. The container has a neck with a lid for filling liquid; a special valve can be used through which air is passed inside; it all depends on what exactly needs to be transported in it.

Last but not least is the flange or coupling drain ball valve with a diameter of approximately 30 mm. The container is classified as medium-tonnage containers.

Standard

Although the Eurocube may vary in size, volume and materials used for its manufacture, the standards all exist:

By type, Eurocubes are classified into:

1. Food– used mainly for storing water and products (for example, oil, vinegar, ethyl alcohol).
2. Technical– usually used for transportation and storage of acids, alkalis and fuel.

The price of the product depends on the manufacturer, as well as whether it is new or used. The difference can reach 7,000 rubles. Now we will deal with the cranes for the Eurocube and how to install them on it.

Coupling valve

1. A type of ball valve that is connected to a water tank using couplings that have an internal. The product may also have an internal tapered thread.

1. The tap is opened by turning the handle counterclockwise until it stops. Full opening occurs when the handle is installed parallel to it; it closes by turning the handle clockwise.
2. Very often such a tap can be found in heating and water supply systems.
3. Device modifications:

• economy version - single-hull or monolithic;
• a frequently used design is a two-piece one, which also includes a body;
• repairable - three-part or collapsible (you can repair the faucet yourself).

In the photo there is a container with a water tap on the site

Tip: when choosing, you need to take into account the diameter of the adapter from the Eurocube so that it matches the internal diameter of the tap.

Installation

1. Before installation, clean the faucet from sand and dust; carry out installation only by closing it completely.
2. Prepare flax thread for skeins of thread or plumbing fum tape.
3. Wind the thread or tape around the threads, making sure all grooves are filled.
4. If using thread, squeeze sealant onto it.
5. Screw the faucet onto the adapter by hand. If everything is done correctly, it will turn almost two turns.
6. Take wrench and finish screwing on the tap.

Device characteristics - plus:

• low cost;
• low weight and dimensions;
• long service life;
• versatility and reliability of the design;
• does not require maintenance;
• installation is permitted in any position;
• seals the flow, and this can be done very quickly.

Disadvantage: long levers or expensive electric drives are required to close when using the device automatically.

Advice: when assembling the coupling valve, care must be taken so as not to cause deformation of parts and failure of the product.

Conclusion

Eurocube - plastic container increased strength due to the use metal frame and pallet. Products are used in various spheres of our life.

For ease of use, a drain valve (coupling or flange) is provided, which is most often connected through an adapter. The video in this article will give you the opportunity to find Additional information on the above topic.