How to install horizontal blinds on a wall. Installation, repair and maintenance of horizontal blinds. Installation of horizontal blinds: video instructions for installation on a plastic window

Installing blinds solves many problems with window decoration. Curtains, drapes, tulles, no matter what fabric they are made from, require frequent washing, since dust and dirt accumulate on them. The thickness of the curtains determines how well they transmit or block light.

Blinds are much more convenient than curtains in many aspects.

Depending on the angle at which the lamellas are located, they completely open access to natural light into the room, partially block it, gently diffuse it, or completely isolate the room not only from light, but also from thermal radiation. They do not require special care, and installing blinds yourself is not difficult.

Varieties

Horizontal

The light-protective design with horizontal lamellas has become familiar, almost classic for window design.

Advantages:

• Compactness. Installed directly on the window, leaving the window sill free. This saves space and allows you to place greenery on the window in favorable conditions;
• Light weight designs;
• Strength and rigidity of the lamellas, preventing deformation;
• Fire safety;
• Simple control mechanism;
• Special coating or impregnation against dust, dirt, odors and grease;
• Resistance to humidity and temperature changes;
• Various materials for the manufacture of lamellas: wood, plastic, aluminum, less often fabric;
• Easy installation;
• Affordable price.

Some disadvantages are worth mentioning:

• When mounted on a frame, the angle of inclination of window sashes when opening is limited;
• The slats produce a characteristic knocking or ringing sound when the wind blows. To avoid this, you need to purchase lower fasteners, which are not included in the kit and quickly become unusable;
• The structure is subject to repair if several slats are severely deformed, but it will cost the same as new blinds;
• Not suitable for balconies and loggias with sliding windows.

Vertical

They are distinguished from horizontal ones by:

• More aesthetic appearance. Horizontal blinds are more likely to be functional, while vertical blinds are decorative;
• Possibility to cover large area one cornice. Horizontal blinds, as a rule, consist of narrow slats and are intended for minimalistic decor large windows. Vertical models have different widths and easily cover the area of ​​large windows, arches and doorways.
• Variety of materials. Can be made from wood fibers, wood, aluminum, bamboo, plastic, woven and non-woven fabric, mirror, blackout, thread. The abundance of materials provides another advantage - variability of colors and textures;
• Modern and original design windows opening more possibilities for design;
• Simplicity of control mechanisms. Both mechanical and electrical are possible;
• The ability to place photo printing on the “curtains” due to the larger surface and best characteristics material;
• Practicality. Larger slats are easier to wipe when necessary, which does not arise often. If in case heavy pollution, for example, in a children's room the slats will still need to be subjected to hygienic procedures, this will not take much time - they can be washed by hand and in a washing machine;
• Possibility of installation on non-standard windows(triangle, trapezoid, arch, bay window);
• The structure is subject to repair. To replace this or that part, you do not need to call a specialist; it is simple enough to do it yourself. You can replace the slats one at a time without having to dismantle the entire structure.

Vertical blinds, as the name suggests, are a simple and convenient light-protection structure consisting of longitudinal vertical plates.

Rolled

Roller blinds and roller shutters are solid fabrics, often made of textiles, but other materials are also possible, which, like horizontal blinds, are rolled up. The height can be adjusted by fixing the curtain with a weighting agent on the bottom strip of the canvas.

Exist different types roller shutters: with an open drum (for fastening directly to the window) and with a decorative cornice; “mini” for installation on each frame separately and “roll-cassette” for covering the entire window.

There is an opinion that roller blinds are the most budget-friendly and practical option window decoration, but this is not entirely true. Of course Roller shutters have their advantages: variety of natural and synthetic fabrics, colors and patterns, ease of care (allowed wet cleaning) and operation, the ability to fix the curtain at the desired height, special impregnations against dust, moisture, high temperatures and glare, compatibility with other types of curtains. It is convenient if you need to hide a room from the sun, or decorate a window with beautiful tulle so that from the street you cannot see what is happening inside.

But with so many advantages, they also have significant disadvantages.:

• Budget price- it's a delusion. Yes, a medium-sized curtain itself made from a common material will be inexpensive, but it will look boring. In order for the window design to be complete, you need to think through additional decor, and this increases the cost several times;
• Roller blinds in the bedroom, office and rooms with high windows need electrical control. Electric drive designs are expensive, and some manufacturers also produce noise;
• Impossible make a custom curtain from a specific textile. You can only select specific products specific brand, since a set of fabrics for production roller blinds very limited: translucent, textured, reflective, perforated, blackout and that’s all, perhaps;
• Maximum width roller blinds – 280-300cm, that is, cover a large area with one curtain rod, for example, panoramic window or the balcony will not work;
• They can There will be problems with installation not on the wall, but in the window opening, since the bobbin is wider in width than the curtain itself. On the sides window openings There will inevitably be gaps. Ceiling or wall mounting is preferable.

Pleated

This type of blinds is similar to both horizontal and roller blinds. The design consists of a control mechanism (chain or electric drive), weights, and pleated fabric that resembles accordion bellows.

The range of materials, colors and textures is very diverse.

Peculiarities:

• They close from top to bottom, like classic canvases, from bottom to top, or from both sides at the same time. In this case, the degree of density of the “accordion” can be adjusted, thus closing either the upper, lower, or central part of the window;
• Suitable for covering windows irregular shape;
• Optimal solution for attic, attic, ceiling and inclined windows;
• “Opening”, the canvas is compactly folded and hidden inside the cornice;
• Convenient for installation on all types of windows;
• Various ways fastenings and control mechanisms (manual and electric);
• The woven fabric is washable;
• The curtain fabric can be made of two types of fabric at the same time, which makes it possible to regulate the degree of transparency, darkness, and sun protection;
• Easy installation can be done by yourself.

Types of pleated:

• Classic. In appearance they are most similar to horizontal blinds, however, they can also be vertical. Made from fabric, paper or plastic. Designed to darken the room, protect against heating sun rays, zoning the interior space of the room.

• Corrugated. This type is a vertical and horizontal double pleat. As a result, the folds look smoother, neater and denser. Corrugation made of plastic and paper in this design absorbs a significant part of the heat and protects from bright light.

• Inclined. A type of pleated specifically for windows that are located at an angle in the attic or ceiling. Their peculiarity is in a specific assembly system, which does not allow the canvas of any material to sag when at an angle. Mostly inclined models are produced with electronic control.

• Arched. The most flexible canvases that take any shape, like a paper fan. Good decision for rooms with non-standard form windows (arches, trapezoids, triangles, beveled windows).

• "Day Night". The canvas of such blinds consists of two layers of fabric: light, permeable a large number of light fabric for daytime use and dense, dark fabric for protection from the bright sun during the day and prying eyes in the evening.

Cassette

Such systems involve either the use of horizontal slats or a solid fabric, but are not horizontal blinds or roller blinds. They differ in the types of cassettes (angular, round, flat), controls ( different kinds mechanical and remote), materials used (plastic, textiles, bamboo, aluminum).

Their main feature consists in a design, the special structure of which makes it possible to fix the blinds on minimum distance from window glass. This prevents deformation, sagging, wrinkles and unevenness, and completely opens the window sill.

Advantages:

• Compactness. Cassette blinds take up a minimum of space, leaving owners the opportunity to use their imagination and organize additional window decoration or leave the window sill as a functional surface;
• Simple and clear type of control;
• Long term services. Special impregnation protects the canvas from dust, grease, dirt, moisture, abrasion;
• Ease hygiene procedures. Cassette systems do not require special care. It is enough to wipe their small surface area with a damp sponge and soapy water once every few months;
• Variety of designs for interiors in any style;
• The tight fit of the canvas to the surface of the glass protects equally well from heat and cold;
• Possibility to install the system yourself;
• A variety of materials - from light window decoration to total blackout protection;
• Possibility to combine blinds with curtains, tulle, lambrequin.

Mounting methods

There are three types of fastening blinds: to the wall, to the ceiling, directly to the frame, and two ways - with and without drilling.

The universal basis of any fastening is the cornice, which different ways attaches to a wall, frame or ceiling.

With drilling

This is done using self-tapping screws, brackets on which the cornice and fishing line are installed. Additionally, you will need a pencil, ruler, drill, and screwdriver.

First you need to make markings in the places where the brackets will be located.

For reliability and accuracy, it is necessary to drill holes for the clamps in the marked places. Then, applying the brackets one by one to the PVC frame, use a screwdriver to secure them to the markings. Next, the cornice is installed and the entire structure is assembled.

No drilling

If you plan to replace blinds or other window decoration options in the future, it is not recommended to damage plastic windows. The holes from the screws will remain in the frame forever and will significantly spoil the appearance of the windows. In this case, it is easier to turn to a method that does not require drilling.

In this case, the brackets are attached in two ways:

• by the upper part of the PVC profile on the opening doors (you can simply hang it like a hook);
• on Double-sided tape, which can be glued without fear of leaving marks.

Mounting blinds on the balcony requires a special approach. Plays an important role here balcony design. The type of glazing determines the possibility of choosing certain blinds and the method of their fastening. In general, almost all options are available for balconies. Special attention In this case, you should pay attention to the type of blinds, since not all of them are universal for different types of windows. For example, horizontal blinds are not suitable for a balcony with sliding windows, as they can become deformed during use or from strong winds.

Measurements and markings

The final result depends on how correctly the measurements are taken.

Even expensive ones beautiful models will not look good on the window if there are gaps in the opening or the edges of the slats constantly ride up against the wall.

It is important to pay attention to the following points:

• For the most accurate indicators, a steel tape measure is used;
• The obtained figures cannot be rounded; accuracy must be maintained to the nearest millimeter;
• When ordering blinds, the width parameter is indicated first, length – second;
• Not a single window opening is absolutely perfect. geometric shapes, therefore measurements in height and width must be made at least at two points.

Horizontal

If you plan to attach blinds to the movable half of the window, you will need to measure the gap between the glazing beads and add 30 mm or more, which will prevent gaps from appearing in the structure. The height of the blinds is equal to the height of the window sash.

For installation inside a window opening, measurements are required at three points in height and width, since openings are not always absolutely proportional.

The width is identical to the wide side of the glass plus the thickness of the rubber seal. The length is identical to the height of the window (including elastic bands) and has a margin of 1 cm. To install the cornice, you will need an additional 30-40 cm to the slopes and hinges. The control chain is 2/3 of the window height.

When choosing to fix the cornice on the wall, the width parameter increases by 10 cm, the height is measured from the point of attachment of the brackets to the floor at random.

Vertical

When installing in a window opening, you need to determine the width at the top of the arch and subtract 20 mm. To determine the height, compare the height of the left and right sides of the arch, subtract 1 cm from the smaller value.

For wall mounting, you need to add at least 10 cm to the wide side of the slope. The length of the slats can be any, but it is recommended to retreat 2 cm from the edge of the blinds to the floor.

Ceiling installation involves determining the height (to the floor or window sill) minus 2 cm, it is recommended to increase the width of the arch by 100+ mm.

Rolled

To install canvases to the wall, only one measurement is required - from the edge of the window sill to the markings for the brackets, and the width can be up to 300 cm.

In the window arch, roller blinds are installed after measuring the width, from which you need to subtract 4 centimeters, and the length of the curtain is equal to the height of the window minus 15 mm.

Pleated curtains do not require the same professional approach in taking measurements and installation.

Installation of vertical models

Vertical blinds are the most convenient way window decoration for independent execution. They are attached in three ways: to the ceiling, to the frame with drilling, to the frame without drilling.

In all cases, the fastener is a cornice with decorative facade or without it.

The brackets on which the structure is supported are fastened with self-tapping screws, hung or glued with double-sided tape. The special tape, despite its seeming impracticality, is fixed very firmly, so it is important to correctly apply the markings for installing the brackets. Once they are glued, moving them will be very problematic.

Installation procedure vertical blinds:

1. Preparing tools. You will need a stepladder, a set of screws from the kit, building level and drawing supplies, drill, screwdriver.
2. Applying pencil markings for installing brackets. To securely fix the fasteners, it is recommended to drill holes for self-tapping screws at the same stage.
3. Attaching the brackets in a suitable way(with or without drilling).
4. Installation of cornice.
5. Installation of slats. To do this, you need to pull the control cord on which the fastenings for the slats are located so that they fit into desired position. Then fix all the slats on the hooks of the fasteners.

Installation of horizontal

For installation you will need a set of tools: drill, Phillips screwdriver, screwdriver, drawing supplies.

The instructions for installing horizontal blinds on windows contain a list of items that are carried out step by step:

1. Draw marking line for installation of brackets. It must take into account the distance between the clamps and the control mechanism, between the brackets (from 60 cm) and to the extreme areas on the blinds (25 cm). For large blind widths and significant weight, it is recommended to use intermediate fasteners.
2. Drill holes for installing dowels on the surface to which you plan to attach the brackets. It is possible to use blinds on plastic windows without drilling.
3. Profile installation.
4. Fixing the top rod of the blinds on the brackets. It is important to remember that the blinds at this stage are already assembled.

Work with horizontal models on inclined surfaces requires a little more effort and skill.

How to hang roller blinds?

Like other types, roller blinds or shutters are attached in several ways: they can be hung, glued, or attached to a frame.

First way– the simplest and most accessible for do-it-yourself installation is a fastening without drilling based on double-sided adhesive tape. Suitable for tilt-and-turn mechanisms on windows. Performed step by step:

1. Degreasing the areas of the frame and fasteners that will be connected with adhesive tape.
2. Marking the fastening of roller shutters.
3. Installation of roller blinds. The chain mechanism can be installed on any convenient side.
4. Assembly of brackets.
5. Marking for fastening brackets. To do this, you need to install them on the assembled roller blind, install it on the window without fastening, mark with a pencil the places for the adhesive tape, and remove the curtain.
6. Applying adhesive tape to the back surface of the brackets, mounting on a window.
7. Installing the guide string against sagging. It is attached to the “ear” of the top bracket and the weighting of the curtain, and at the bottom it is fixed in the tensioner, which is installed on the frame.

The second method involves attaching to a stationary frame (not opening):

• First of all you need to mount the roller blind, assemble the brackets and install them on the reel. Then this structure must be fixed on the window in order to mark for fastening.
• Second step– fastening the brackets with adhesive tape in the upper part of the frame and the string tensioner in the lower part. It is not necessary to pre-attach them with tape, but it is advisable to eliminate problems with subsequent drilling of holes for screws. After installing the guide string, the curtain itself is mounted into the mechanisms.

How to secure cassette tapes?

You can also install cassette blinds yourself. Before installation, you must read the instructions, make sure that everything is complete, and prepare all the necessary tools: a screwdriver, drawing tools, a screwdriver, a drill, cotton pads or a small piece of cloth, and a degreaser.

When everything you need has been collected, you can proceed to the first stage - degreasing the glazing beads. Then you need to remove side covers box, lift it to the top of the frame, focusing on the guide protrusions, drill holes for fastenings, and secure with screws. You can use a screwdriver for this purpose, or you can perform the process manually using a Phillips screwdriver.

Once the box is installed, you need to secure the covers to the sides. After this, you can glue the guide strips to the degreased frame. The guides should be several centimeters below the angle of the bead.

Important nuances

Installation work window design requires certain skills and experience, but if you want to try it yourself, you need to take into account some of the nuances and features of this work.

Installation of blinds begins long before preparation work surface and a set of tools.

The first step of this process– an informed decision regarding the type and variety of blinds, material, color and texture, depending on the functionality of the room. So, it is more advisable to choose vertical blinds for the living room that let in light, for the bedroom automatic roller blinds with electric drive made of blackout fabric, and for the kitchen, where the smells of cooking and combustion products of food are constantly in the air. plastic blinds that do not absorb grease and dirt.

Second important point- this is the correct marking. A lot depends on it, including how easy the installation process will be. If all the architectural features of window openings are taken into account by specialists when ordering blinds from them, everything will go easily and smoothly without the help of professional installers.

It is also important to consider whether it will be possible to open the window after installation, how the light protection devices will work, and whether there is a risk of their deformation.

The installation of blinds must be carried out exactly with the markings and subsequent verification of the functionality of the structure. The most important point here is the choice between fastening - with or without drilling.

It is also necessary to provide for the type of control. For low windows great solution is one of the varieties of mechanical direction. Attic and sloping windows, windows in suitable for the bedroom magnetic, automatic (electric) control with electric drive.

Independent installation of different types of blinds on plastic windows is a troublesome process, but economical - on the one hand, and interesting and educational - on the other. Blinds in the house are a unique decorative element that allows you to transform plastic windows and decorate the interior as a whole. But there is one “but”. Blinds cannot be hung in two minutes, like cotton or tulle curtains. This requires a whole arsenal of knowledge and practical skills. Installing blinds on plastic windows yourself requires time, certain knowledge and skills. If you are new to this area, take your time with the activity, learn the basics of the design, installation methods and fastening rules, and only then rush into battle.

The ideal option is to invite qualified specialists. The process will be fast, but not profitable financially. Doesn't fit? You don't know how to install blinds on plastic windows, but want to do it yourself? Then we suggest installing them yourself, after first familiarizing yourself with the basic rules and technology.

Blind mounting options

The design of blinds is a complex mechanism that requires not only a share of responsibility on the part of a specialist or “self-taught” person, but also a certain amount of knowledge, skills and abilities. There are many types, they all have general basics installations, but each of them has some nuances that are important to know about. If you take into account the subtleties of each type of blinds, they will last for decades without reminding you of themselves.

Before choosing mounting methods, pay attention to the condition of the walls and their architectural features.

You can attach blinds in one of three existing ways:

1. into the window opening;
2. on window sashes (for each separately);
3. onlay.

Which method should you choose? The choice depends mainly on the wishes of the owner, but also on the design features of the window.

What do you need to know about windows so as not to make mistakes?

Let's pay attention to common mistake which occurs if you approach the issue of installing blinds on plastic windows incorrectly.

If you have installed horizontal blinds that look like a solid canvas on plastic windows facing the slopes, rest assured that you are guaranteed discomfort when opening and closing each of the sashes. This method is incompatible with blinds in the form of solid curtains, since each time you open a window or vent you will have to pull them up and then lower them again. This is a very troublesome task, especially in the kitchen, when plastic windows are opened very often for ventilation.

The solution is to fix the blinds not in the slopes, but on the window sashes.

How to install vertical blinds?

Installation occurs using brackets.

1. Make markings by marking with a pencil the places where you plan to hang them. It is desirable that the distance between them be from 30 centimeters to half a meter.
2. Fix the curtain rod in the brackets according to the instructions included with the curtains and additional elements.
3. At correct installation a clicking sound is heard in the brackets.
4. Do the same with the slats, installing them in the runners until you hear a click. The slats need to be hung sequentially if they have photo printing or a pattern.
5. Connect the lamellas with a chain both from the inside and from the outside.
6. Check the operation of the entire mechanism.

Installing vertical blinds has one, but very significant nuance. It is important to consider the width of the slats. If it measures more than 160 cm, then the number of brackets used must be increased to at least three.

Installation of horizontal blinds

A huge plus of horizontal blinds is that they can be installed on plastic windows of any shape, even skylights not an exception.

Installation on frame – perfect option for horizontal slats, allows you to open and close windows separately or simultaneously.

To install horizontal slats, you need to stock up on a screwdriver, a screwdriver and marking material (chalk, pencil or alcohol-based felt-tip pen).

Having decided on the mounting method, proceed to the following steps.

Find out the window sizes(measure width and height).

• If you are going to install blinds in the first way - in the window opening - you should subtract 2 centimeters from the height. This way you will achieve a result when the slats do not touch the window sill.
• If you chose the third method - attaching the blinds with an overlay - add 5 centimeters to the width, but always on each side. IN in this case the height is determined by the desires of the owner.
• Installing blinds on windows (on each sash) is considered the simplest and most the easy way fastenings The dimensions of the window must be measured taking into account the fittings, that is, so that they do not limit the window or touch it.

Remember: both plastic windows and blinds must function perfectly and efficiently. Therefore it is very important to accurate measurements before hanging them.

• Unpack the blinds. Assess their quality, inspect for defects, and check the components. Everything is in place?
• Place the blinds against the window. It is important that the body fits between the boundaries of the beads on both sides of the glass.
• Close the blinds tighter. They must be in the same plane as the window.
• Assess the overall situation. The blinds should be located at the top of the transparent area.
• Visually note the presence of a gap, which very often forms between the fastening elements and the window sashes. The size of the gap can be different and vary from a few millimeters to a couple of centimeters. They do not depend on the correctness of your actions; these are rather the costs of the design of the window and double-glazed window. Manufacturers have provided possible risk and to correct the current situation, we equipped the blinds with linings and special elements that allow achieving required thickness and reducing the distance between fastening elements and window sashes.

Be sure to pay attention to the marks on the base of the linings. They can be of two types: R (from English word right) and L (left). Right and left application respectively.

• Fix the gaskets until tight pressure is established. Then secure them in the gap between the fastening elements and the window field.
• Mark the fastening.

The geometric shape of the curtains is the main guideline for marking. Be sure to check that nothing prevents the window from opening and closing. Install an additional fastener where the cord is adjusted.

You can attach the blinds using one of two options.

1. Bead mounting. A very delicate process that requires care in choosing the length of the screws. An incorrectly chosen length is the first step towards depressurization of the glass unit, the result is a violation of the thermal insulation properties.
2. Profile mounting- a simple and safe process, but requiring care and clear actions.

Remember! The bead can always be replaced, the profile cannot.

• Install the structure

Install the blinds using long screws. It is advisable that you use the self-tapping screws included in the kit. The aesthetic appearance of the window after installing the curtains depends on them. This step must be taken with great care.

• Install the cornice, runners, slats

Place the decorative cornice on the mechanism and secure the plugs on the sides. Using a drill (diameter should be 3 millimeters), make a hole for the plastic “fungi”, they are located in the lower edge of the bead. This will allow you to install the guide line. After pulling it tight, secure it and cut off the excess.

• Control step - checking the functioning of the entire structure

What should you consider?

Do you want to installed curtains served long time, and their mechanism and fastening did not lose their original functions?

Tip 1. When buying blinds, try to ensure that all components are of high quality.

Tip 2. Choose the adjustment mechanism taking into account the convenient side for use.

Tip 3. Make sure that when the windows are fully opened, the blinds fold completely.

Tip 4. Turning the handle should not limit the mechanical impact on the elements.

Tip 5. Carry out maintenance in a timely manner.

Everything ingenious is simple. Now you are convinced of this. It’s easy to install blinds on windows with your own hands if you have some detailed instructions. Choose a convenient method for yourself, use the instructions provided, and tomorrow the windows will “thank you.”

Cover the windows from prying eyes and sunlight humanity has been trying since ancient times. Previously, curtains were used for this, but now blinds are becoming increasingly popular. The slats in them can be either horizontal or vertical.

Horizontal blinds are divided into different types: attic, roller, bamboo shutters, etc. Such devices have different functioning mechanisms and dimensions.

They are attached to the frames; they can be installed on top of the window block or inside the frames. It all depends on the wishes of the apartment owner and the dimensions of the window opening. Most often, such structures are installed in offices, houses, apartments, factories, retail outlets, and shops. Their color palette very rich.

The product can be attached to the profile of plastic windows in two ways:

1. Using self-tapping screws. This method involves drilling. Disadvantage: after dismantling it is difficult to remove the remaining holes from the fasteners.
2. No drilling. In this case, the entire structure is less stable, but the appearance of the window does not deteriorate.

To install blinds on plastic window we need:

• Screwdriver (screwdriver).
• Slats (for each sash).
• Pencil.
• A little time and patience.
• Bottom fasteners (2 pieces per sash).
• Upper fasteners (2 pieces per sash).
• Self-tapping screws (4 per sash).

Work progress

• Unpacking, we unwind the cord for adjustment.
• We remove the adjusting bar.
• We need to put a bracket on the top of the product.
• We make a measurement. To apply markings, it is recommended to apply a spirit level so that the top plate is strictly horizontal and does not fall to the side or down. If the window itself is installed with a skew, then the installation is done based on this skew of the sashes.
• We put a mark where the self-tapping screw will be screwed in.
• We check the correctness of the marks.
• Let's try it on again and remove the brackets.
• We take the right bracket, apply it to the intended area and screw it in with a screwdriver.
• We install the second bracket in the same way.
• We put on the blinds and open them.
• We place clamps on the sides of the canvas.
• Let's check if the mechanism works.

To clean, snap off the bottom slats and pull the blinds upward. We wipe the window and put the slats in place. The dust is swept away with a broom; after cleaning, an antistatic aerosol should be treated so that the structure collects less dust.

Fastening without screws

Typically, such fasteners are used in rented areas, when the appearance of the windows cannot be spoiled.

We will need:

• Scissors.
• Double-sided tape.
• Set of blinds.
• Pencil.

Work progress

• Unpack the package.
• We remove the adjustment bar so that it does not interfere.
• Place the block with the wrong side up.
• We measure the length of the tape equal to the length housings.
• Cut off the excess tape.
• We remove the protective strip and stick it on the wrong side of the block.
• We try on the location of the blinds relative to the window sashes.
• We mark the points where the ends of the blinds will be attached.
• Remove the protective strip and glue the top part.
• We press the profile well to the surface.
• We install the adjustment bar.
• We check the operation of the structure.

Important! The width of the tape should be approximately equal to the width of the block. We smooth out the tape so that there are no blisters; it should lie evenly over the entire surface.

We attach horizontal blinds to wooden windows

We take measurements

We measure the dimensions, taking into account the size of the window. When installing in an opening, subtract 1 to 2 centimeters. This is a correction for uneven slopes. After this, we determine where the controls will be located (left or right side). After this, you need to decide on the type of brackets that will be used (standard; twist model). We measure the length of the handle to control the structure; usually its standard size occupies 2/3 of the entire height of the product.

Important! The maximum width of the lamellas is about 22 centimeters. There are also larger sizes in stores, but with a width of, for example, 30 cm, no one can guarantee that the blinds will open and close well. Recommended maximum height the structure should be no more than 2.5 meters.

How to attach horizontal blinds to look like wood

This is a design with aluminum slats that imitates natural wood due to polymer coloring. It's perfect to complement classic interior. In appearance they look like wood, but are less capricious and easy to use.

• We make outlines with a pencil in the places where the brackets will be installed. There should be at least 60 centimeters between them.
• Please note that the brackets should not interfere with the assembly of the blinds or get into the latch or other moving parts of the mechanism.
• We attach them to the sash, wall or ceiling (depending on the owner’s preferences).
• Turn the latches counterclockwise until they click.
• We place the upper part in the fasteners and screw the latches until they stop, turning them clockwise.
• We check the operation of the entire structure.

How to attach horizontal beech blinds

What you will need for installation:

• Phillips screwdriver.
• Level.
• Felt pen.
• Pliers.
• Roulette.
• Hammer.

We take measurements and markings

It is necessary to pay attention that after installation the product should not block the tolerance window handle, did not interfere with closing and opening it. We outline places for installing brackets. One of the upper mounts should be located next to the mechanism. Because when folding and unfolding, a large load is placed on this place and it is easy to break the fastening.

Celebrating necessary points marker. Self-tapping screws should not be taken more than 1 cm, otherwise there is a high probability of damage to the glass unit, which will lead to its depressurization. Because of this, constant condensation will begin, which will disable the window opening mechanism.

Mounting on inclined windows

• We install twist brackets on the top of the window.
• Plastic brackets are installed on the bottom.
• We fasten the cables to the bushings.
• We put bushings in the holes in the upper cornice.
• We install on brackets.
• We pass the cable through the holes at the edges of the planks.
• We put the second set of bushings in the holes in the lower brackets. We pass the cable through it and fix it with a screw at the top.
• We fix the window handle.
• We check the operation of the entire mechanism.

Differences between horizontal and roller blinds

Rolled - this is a single canvas wound into a roller. Such a canvas is usually fixed above the window, and the lower edge of the product is equipped with a special rail to make the structure heavier. This product open type. They are recommended to be installed above the window.

Design closed type It is a box with a roller closure and side dies that help fix the canvas to the window. They are often equipped with electric drives, which operate from a control panel. Such a system makes similar designs more comfortable to use.

While horizontal blinds are attached to the wall, to the ceiling, they can be installed between frames (mainly used for wooden windows).

Conclusion

Horizontal blinds – universal method ennoble window hole. Due to the variety of materials and colors, they are used for installation in apartments, private houses, offices, and retail outlets. Installation methods can be easily selected depending on the owner’s wishes: outside, inside the opening, on window frame, between frames

The most important advantage is that installation of such a mechanism can be carried out by almost anyone who has it at hand. minimum set tools (screwdriver, screwdriver, knife, hammer), a little patience and skill. Blinds do not block light sources completely, but help create diffused lighting.

At first glance, it may seem that installing horizontal blinds seems like an easy and simple process. However, it is worth considering that windows and walls in houses are most often uneven, so installing horizontal blinds requires appropriate experience and knowledge.

If you are confident that you can install the blinds yourself, then you must adhere to a certain installation technology.

To do this, you will need tools such as a Phillips screwdriver, hammer, hammer drill or impact drill, drills and drills. The first thing you need to do is decide on the method of installing horizontal blinds - attach them to the frame or in the window opening, to the wall or to the ceiling.

Only after choosing the mounting location and taking correct measurements can you begin to install the blinds. In order for the installation of horizontal blinds to be carried out reliably and efficiently, it is necessary to use fastenings - brackets or brackets, which are included with any blinds.

Brackets can be used to reliable fastening blinds on almost any surface.

Video: Blinds for plastic windows. Measurement and installation.

Technology for installing horizontal blinds:

1. Mark the places where the brackets will be attached. When marking, you need to take into account that the brackets should not touch the latch and the control device. Using a ruler and level, mark the placement of the fasteners from each other at a distance of more than 60 cm and less than 25 cm from the uppermost sections of the blinds.

If the width of the blinds is large, you can use intermediate fasteners to increase the reliability of installation. One of the brackets must be placed near the lifting and lowering device, since in this area the blinds device is subject to the greatest load.

2. Consistently drill holes in the wall and insert dowels into the markings. Screw the brackets with screws. It is very important that the screws and dowels are completely similar to the fastening, wall or ceiling material.

If you plan to attach horizontal blinds to the PVC window frame, then drill window profile not necessary, since there are special brackets designed for metal-plastic windows. It is worth noting that this fastening method may only be suitable for a swing-and-turn sash.

3. The blind cornice is installed on the mountings.

4. The top bar of the blinds is placed on the brackets and locked with a lock. Moreover, horizontal blinds must already be assembled.

The installation of inter-frame horizontal blinds has some differences from the technology presented above. Such blinds should be installed in internal space between the glasses.

These days, blinds have gained considerable popularity - they are installed both in private homes and in offices. Most often, the installation of systems is carried out by specialists, but installing blinds on a plastic window with your own hands is also quite possible and does not even require any special skills or tools. These curtains can be installed in several ways, the choice of which depends on the interior and functionality.

Varieties

In stock today construction stores There are several types of blinds available. Depending on the specific type The features of fastening curtains change.

You can find several varieties of horizontal blinds on sale. The lamellas in them are installed horizontally, which explains the name of the design. The thickness, width and type of material can be customized. The structure can be attached inside the frame, to the frame itself, to the slope or on top of the window block.

Horizontal blinds are most often installed in institutions

Similar blinds are installed in offices, production facilities and other places. These designs are universal - if desired, you can find horizontal blinds in almost any color and shade.

Due to their design features, such blinds are most often mounted on top of windows.. The slats in this case are oriented vertically and are made of plastic or fabric. There are varieties on the market that differ in the length of the slats.

Vertical blinds are mainly installed in residential premises

This model is most often installed in private homes, but they are also in demand in offices. Installation of vertical blinds is carried out using self-tapping screws. As alternative option Mounting to the ceiling is practiced.

Roller blinds are made of fabric, completely cover the glass, and if desired, they can be raised by rolling them into a roll. Installation is carried out using brackets, screws or adhesive tape.

Roller blinds can be installed without drilling walls and doors - using double-sided tape

The need for drilling varies depending on the type:

1. Vertical structures are mounted on top of the window or under the ceiling. In both cases you will have to drill the surface.
2. Horizontal blinds can be attached to the top slope or to the window sashes. Without drilling, such structures can be mounted on the sashes of a window block.
3. The interframe analogue, as you can easily guess from the name, is designed for installation inside the window itself. This option requires drilling the largest number of holes.

Preparation and measurements

To install blinds you will need the following tools:

• screwdriver or screwdriver;
• pencil or marker;
• roulette.

To ensure that all your efforts are not in vain, it is important to carry out the measurements correctly and accurately - only then will the design work effectively. In addition, it must be located absolutely symmetrically to the glass unit. Blinds attached with adhesive tape are more tolerant of errors - they can be corrected if desired. For analogues with self-tapping screws, additional holes will need to be made, which is unlikely to benefit the beauty of the window; flaws here are unacceptable.

At the first stage of installing blinds, measure the width and height of the window

To correctly position the structure relative to the window and floor level, you will need to measure the following parameters:

• window opening dimensions;
• length to the bottom edge of the curtain;
• distance between fasteners.

For horizontal blinds installed on sashes, you will need to additionally measure the dimensions of each glass. To the results obtained, add 2 cm to the top and bottom edges and 0.5 cm to the sides.

Installation of vertical blinds

Installing vertical blinds is actually not as difficult a process as it might initially seem, and anyone can cope with this task. If the length of the curtain is short, then installation is carried out inside the window opening. Otherwise, the structure is installed under the ceiling or on the wall.

The algorithm of actions here is as follows:

Installation of chain and lamellas. After attaching the cornice, all that remains is to hang the slats, install the runners, and also attach the adjusting chain. Important point: Be sure to hang the slats in the same order in which they are in the box. Otherwise, you can ruin the entire drawing (if there is one).

Installation of horizontal blinds

Attaching horizontal blinds to plastic windows is somewhat more complicated. The main thing is to strictly follow the instructions:

1. The first step is to secure top elements fasteners This is done using a screwdriver. First, the holes are prepared, after which the bracket is attached with self-tapping screws.
2. We hang the cornice. It should be fastened until it clicks.
3. Holes for lower mounts drilled by hand. When choosing a diameter, you should take into account the dimensions of the thread retainer connecting the lamellas. Most often, horizontal blinds require additional holes on the sides. This helps to insert the clamp connected to the lamella fabric into the corners.

When installing horizontal blinds yourself, you must carefully follow the instructions.

Important: self-installation must be done as carefully as possible. Very often the slightest mistake results in the entire structure not functioning correctly..

In the case of roller blinds, there are several mounting options, so before you start, you should choose the most convenient one. The first is installation on self-tapping screws, which in essence is no different from the option described above, the second is on a special duct tape, which is used instead of self-tapping screws, and in the third, the roller blind is hung on the sash.

To fix roller blinds, use brackets or adhesive tape

Important: do not forget about degreasing the plastic - it will help significantly improve the adhesion of materials.

Inter-frame curtains

Inter-frame curtains are used only for double frames. Installation of blinds of this type is somewhat more complicated than the previous ones, and the process itself will result in an inevitable violation of the integrity of the profile: you will have to drill at least two holes through which the handle and cord to control the system will be cut out.

The curtains themselves are mounted in the inner sash, or more precisely, in its upper part, and the bracket is mounted directly to the upper profile. Installing the structure is in many ways similar to working with horizontal blinds.

Inter-frame curtains are installed in double glazing

Do-it-yourself installation of the system is carried out according to the following algorithm:

1. The window frame unwinds and the blinds are applied to the inner sash. This is used to check the size matches.
2. Markings are made for fastening, as well as points for the cord and control handle, after which holes with a diameter of about 5 mm are drilled.
3. The brackets are inserted into the calipers, the cords and control handles are brought out, with the cord through the lower hole.
4. Inter-frame blinds are attached to the sash with special inter-frame brackets.
5. An adapter is installed on the frame, and a control handle is connected to the flexible terminal.
6. The control handle and cord lock is installed.
7. The frame twists back.

The blind control element is led out through the frame

As you can see, the technology of installing blinds on plastic windows without drilling is completely unsuitable here. The principle itself is similar to the installation of all other design options, with the only difference being that you have to disassemble the frame, screw the bracket into the interframe space, and remove the controls through the drilled holes.

So that the blinds can serve for a long time for long years, you should follow some operating rules:

1. When purchasing, you should carefully check the package and all equipment, especially fasteners. They must be of high quality.
2. You should choose the adjustment mechanism wisely - it should be on the side that is convenient for use.
3. Make sure that no one opens the windows while the blinds are not yet fully closed.
4. The rotary handle must not interfere with or touch other fittings.
5. Don't forget about periodic maintenance.
6. It is quite possible to install blinds on windows yourself, but it is better to entrust its repair to a professional.
7. Plastic structures are preferable: they are much easier to care for.
8. You should not clean the system too often, this will only lead to rapid wear of the protective layer.

Installing the device with your own hands, as you can see, is not a difficult task at all, be it metal, plastic or wooden blinds on plastic windows. The main thing is to have quality instructions at hand. Thanks to this material, you can hang your blinds as quickly and efficiently as possible.