How to install a screen on an acrylic bathtub. A non-standard solution for arranging a storage space - a screen for an acrylic bathtub from a window profile Installation of a screen under an acrylic bathtub

To completely complete your bathroom renovation and get an impeccable design, you will need to install a bath screen.

After installing the bathtub, its appearance is not entirely aesthetic due to the appearance of the sewer and water pipes, as well as the fastenings to the floor.

The screen will not only hide all communications and decorate the room, but will also be useful from a practical point of view, as it will allow you to store detergents, brushes and other bathroom accessories behind it.

Installation is quite simple and does not require the use of special tools or construction experience.

Types of screen designs

To properly organize the space under the bathroom, gain convenient access to communications and provide the necessary functionality, you need to choose the right screen design.

Access doors are:

• hatch type;
• sliding type;
• folding type;
• swing type.

TO advantages of a stationary screen relate:

• high strength material that makes it easy to finish them and even install tiles on them;
• security additional support for the bath;
• long service life due to its resistance to high humidity and mechanical stress.

The disadvantages are the following:

• impossibility of dismantling without destroying the finish and supporting frame;
• waste of space under the bathtub due to the thickness of the walls;
• heavy weight of the structure.

It is also worth paying attention to the fact that installation of such a screen is impossible under an acrylic bathtub.

Sliding

It consists of two or more sliding sashes mounted on special guides and usually made of lightweight materials, for example, plastic panels or waterproof MDF.

Just like stationary ones, they provide full or partial access to the space under the bathroom. However, they take up minimal space and can be easily dismantled and replaced with others of suitable size.

Many manufacturers additionally supply them with convenient plastic shelves for storing bathroom items.

The overall cost of the design is minimal compared to others.

But despite all the advantages, sliding screens are very unreliable and can easily move out of place even with minor impacts or pressure. Therefore, you often have to put them in place yourself.

Removable

This model is designed for installation on an acrylic bathtub; its body is made of plastic. This material has enhanced decorative properties, but at the same time its practicality and functionality leave much to be desired.

This is due to the peculiarities of the fastenings and the difficulty of accessing communications located under the bathroom.

Such screens are not suitable for storing bathroom accessories that require quick access. However, they can be successfully used as storage for unnecessary items.

Maintenance of communications also becomes difficult and in some cases, in the absence of problems, the owners do not carry out their timely inspection, which ultimately leads to disastrous consequences.

If you look at the cost of a removable screen, it is several times higher than other designs.

Therefore, it is advisable to purchase them to create a unique design or if it is impossible to install the first two types of screens.

What material should the screen be made of?

In order for the screen in the bathroom to last longer, when choosing it, you must first of all pay attention to the material from which it is made.

Screen in the bath, due to special operating conditions, must meet the following criteria and requirements:

1. Increased moisture protection. The presence of a protective coating or moisture resistance of the material itself allows you to extend the operation of the screen without deteriorating the mechanical properties or fading of the decorative finish.
2. Sufficient material strength. The rigidity of the doors and the frame itself will ensure increased safety and durability.
3. Resistance to elevated temperatures, which can have a detrimental effect on the condition of the finishing layer. This is especially true for those who like to take hot baths for a long time.

The main material usually chosen is:

• plastic;
• waterproof gypsum board;
• OSB or MDF;
• acrylic;
• brick;
• thin-sheet galvanized or polymer-coated metal.

Tiling is usually done on stationary brick or plasterboard screens.

Preparatory work

Before installing the screen under the bathtub, it is necessary to carry out preparatory work. They consist of preparing the installation site, taking measurements and markings.

If possible, free up the space near the bath so that it is convenient to place the screen parts and carry out installation work.

If repairs have been carried out previously, then an oilcloth should be laid on the floor to prevent construction waste from getting on the decorative finish. The width of the oilcloth must be at least 0.5 m, and the length must correspond to the longitudinal size of the bath.

Using a tape measure, measure the required distances along the walls and floors according to the selected screen design.

Then mark the installation locations with a marker and adjust the position relative to the sides of the bathtub.

In this case, it is necessary to take into account the thickness of the doors so that the doors are located directly under the bathtub: under a cast-iron bathtub, a stationary screen can be installed flush or protrude slightly beyond the side, and under an acrylic bathtub it can only be flush with the sides due to the low strength of the material.

Diagram of a bathroom with a screen

Installation of a stationary screen

Instructions for installing a stationary brick screen provides for the following types of work:

1. Using the applied markings, level the rough surface of the floor by applying a cement-sand mortar of grade M200. To do this, mix the solution and apply it with a spatula to a clean, dry surface, pre-treated with a deep penetration primer, in minimal quantities. Align it correctly and check the horizontalness with a level.
2. After the base has dried, it is necessary to install and firmly fix a level bar, which should be located strictly according to the markings. It will be a marker for obtaining even masonry of the first row.
3. Perform brickwork with bandaging rows. The installation technology is similar to the method of building a wall for a house. The first row is laid out with mandatory control of the position of the bricks, since any distortions will be visible and subsequently quite difficult to eliminate. Check every third row with a plumb line to form a vertical plane.
4. When creating an opening for access to communications, pay special attention to the evenness of the end part of the brick, since you will need to install a door in it and maintain minimal gaps between the materials. When laying the last row, it may turn out that a whole brick will not fit under the side of the bathtub. Therefore, carefully cut it with a grinder to the required size.
5. Coat the seam connecting to the bathtub with sealant.
6. Treat the brickwork with a deep penetration primer.
7. Apply a layer of waterproof plaster.
8. Lay tiles.
9. Treat joints with special antifungal agents.
10. Install a swing door.

Installing a stationary screen with your own hands is not at all difficult; the main thing is self-confidence.

Installation of a sliding screen

Using the markings applied to the walls and floors with a marker, install the vertical and horizontal parts of the frame, respectively.

To do this, you need to use a level to accurately set their position. Then mark the position of the holes and drill them using a drill or hammer drill.

If the frame was made by hand, then the number of fasteners is selected individually with their even placement every 25-40 cm.

The diameter of the self-tapping screws or self-tapping screws should be from 10 mm, and the length should be three times the thickness of the material.

First you need to install the vertical posts, but without rigid fixation, and then the horizontal ones.

An important point is to align all the parts in a single plane without distortions.

You can check the position using one of the flaps, first on one side of the bathtub, and then on the other. Only then tighten the fasteners.

At the next stage, install additional vertical posts designed to strengthen the frame.

If the design provides for the installation of shelves, then they should be installed at this stage, since after installation of the sashes, access to the space under the bathroom will be limited.

It is imperative to control the position with a level to prevent distortion, as this is fraught with the constant misalignment of the valves.

Move the doors aside and securely fasten the guide, first on one side and then on the other. After this, install decorative trims on the outside, if provided for by the design.

Installing a removable screen

Therefore, in most cases, no problems arise with installation, since all the parts are adjusted and attached relatively easily to the walls and the bathtub itself.

Installation instructions involves performing the following actions:

1. On the side of the bathtub, use a marker to mark the middle of the top plate for fastening the structure.
2. Attach the screen to the bath so that its upper part fits between the mount and the side flush with the end part.
3. Mark the mounting location in the installed position. Approximately, it should be located on a specially marked mark or lower (up to 20 mm) from the side of the bathtub.
4. Tighten the studs included in the kit and securely fix the installation studs. If the fasteners were not included in the kit, you can use nuts with a thread diameter of 10 mm.
5. Secure the corners to secure the screen onto the pins.
6. On the corners, mark places for 3.5 mm holes and drill them with a drill or screwdriver.
7. Put the screens back in place and check the alignment of the holes. If there is a slight misalignment, you will have to drill out a little to prevent deformation or damage to the structure while tightening the fasteners.
8. Screw self-tapping screws into the holes and close them on top with decorative plugs, which simultaneously perform a moisture-proof function and prevent corrosion processes from occurring.

Installing a sliding, stationary or removable screen under a bathtub with your own hands is quite simple. The main thing is to follow the installation technology and sequence of actions.

Only with a competent approach can the structure last a long time without breakdowns and the need for additional maintenance.

Bathroom interiors are varied, but everyone is unanimous on one thing - the space under the bathtub should be hidden from view. To do this, use plasterboard, make panels from hardboard or chipboard.

Today the construction market offers ready-made screens, characterized by quick assembly and aesthetic appearance. Installing a screen under the bathtub will help make the appearance of the plumbing fixture more neat. Behind the sliding doors there will be space for household supplies. There is nothing complicated in installing this device - even a non-specialist can handle the job.

Selecting a screen model

Before you install the finished screen under the bathtub, you must select it.

Today, construction markets have a wide selection of models that differ not only in size and color.

Main features of screens

Screen sashes and frames can be made of different materials

• frames made of different materials - steel, plastic, aluminum;
• sliding doors or a fixed panel that tightly covers the lower part of the bathtub and the space under it, an option is a fixed panel with an observation window;
• sash or panel material – plastic, MDF, organic mirror glass, metal;
• fastener

Choose a model that suits your requirements. You should not settle for cheap options with a frame made of fragile plastic or neglect the choice of color - the screen will become a prominent element of the decor, its breakage or an inappropriate color scheme will cause inconvenience.

Helpful advice: If you plan to install the screen under the bath before finishing the finishing work, for example, laying tiles on the floor is postponed for quite a long time, you can choose a design with adjustable legs. In this case, the height can be changed up to 10 cm in accordance with the rise in floor level.

Screen legs are height adjustable up to 10 cm

Acrylic is a capricious material; bathtubs made from it are usually equipped with a ready-made screen. Installing an unsuitable fixture can damage your plumbing.

Helpful tip: Before installing the screen or blind panel, fill the bathtub with water. This way the plumbing fixture will take its working position, and the screen will not be deformed when using the bathtub for its intended purpose.

Bath screen models have a wide range of sizes. There are standard options designed for the dimensions we are used to, but if necessary, there are also non-standard ones. If possible, choose exactly the appropriate standard size, but if you cannot find a suitable one on sale, some materials (plastic, metals) can be cut with an angle grinder (“grinder”). Therefore, it is worth choosing a larger rather than a smaller size.

Helpful advice: if you can’t find the screen size, you can use the service and order a screen made to individual sizes.

How to install a screen under a bathtub - instructions

The procedure will depend on the type of screen - sliding or solid without the ability to access communications without removing the panel. But both options will not cause problems if you have a ready-made screen with mounts included.

You will need the bare minimum of tools - a tape measure, a screwdriver, a building level. For models with height-adjustable legs, the parts of the adjustment mechanism can be secured with nuts; then a wrench of the appropriate size will be required.

First of all, make sure that the product is selected correctly - take measurements. Next, follow the simple instructions:

Remove the screen components from the box

Screw on the supplied nuts and screen legs.

Install the leg into the holes of the plugs

Place the screen under the bathtub in the opening between the side of the bathtub and the floor, rotating the nuts and installing the product against

Adjust the height of the legs to the desired height.

How to secure the screen if it does not have viewing windows or sliding panels?

The installation procedure for such a product is even simpler - there is no need to insert moving parts into the grooves. It is enough to install the finished screen and secure it, placing it at a standstill.

How to attach the screen to an acrylic bathtub?

To install and fix the screen in the bathroom with an acrylic product, the tool kit will be replenished with a drill.

Unlike a cast iron bathtub, an acrylic bathtub itself serves as a base for attaching a decorative panel. How to install a screen on an acrylic bathtub without damaging it?

Everyone has their own aesthetic preferences, which is why the style diversity of bathroom interiors is enormous. However, almost everyone is unanimous on one issue: the lower part of the bath from the sides should be closed. For this purpose, special bathroom screens are used. They are light, beautiful and easy to install.

Bathroom screens are needed to disguise unsightly details, the space under the bathtub, and sometimes to gain additional space for storing household items.

A few decades ago, these functions were performed either by light curtains or by blank brick walls trimmed with tiles.

Entering the bathroom, a person sees a bathtub. If the screen is not installed, then the legs of the bathtub and elements of the plumbing system are visible.

They seem unsightly and make the entire bathroom look untidy. The screen can become an excellent decorative element that will cover everything unnecessary and help decorate the room in a single style.

During Soviet times, it was difficult to find a worthy alternative to brick walls under the bathroom. Now there are designs made of light and beautiful materials, but brick screens are still installed in some apartments

The design will protect the pipes from moisture and damage, and will become an additional cabinet where you can store household chemicals, household supplies, plumbing tools and other useful items.

Screens are not only beautiful and practical, they can act as a reliable barrier that prevents children and animals from accessing household chemicals

What types of screens are there?

Now you can buy bath screens of any design and made of any material. Manufacturers of decorative panels involve experienced designers in the design of models.

They develop original designs that can fit into even the most sophisticated interior.

For the manufacture of screens, plastic, metal, MDF, polystyrene, plasterboard, polyvinyl chloride, and acrylic are used. Patterns, subject pictures (photo printing), and decorative elements can be applied to the surface of the product.

Often there are models made from combined materials.

Frames for modern screens are made of aluminum, steel or plastic. Buyers often choose models with aluminum frames, because... they are durable and affordable

Glass and mirror screens look very original. They are used not only for their intended purpose, but also to model the space of bathrooms.

For such panels, they use not ordinary glass, but organic glass, because it better resists mechanical damage and shock.

When choosing a material, you should pay attention to its strength, resistance to moisture and high temperatures. A high-quality model can last for decades.

Good performance characteristics imply a higher price for the structure, but this is the case when the investment is completely justified.

Models in the form of bars are chosen by people who care about good ventilation of the space under the bathroom. This helps to avoid the appearance of dampness, fungus and unpleasant odors.

We select a convenient design

Screens consist of a frame (usually aluminum) and panels. They can be blind or equipped with doors for access to communications and items stored under the bathroom.

There are also models with removable panels; they are usually installed under acrylic bathtubs.

The advantages of blind panels are high aesthetics and durability. The smooth surface can be decorated in any way or left plain.

It will look nice regardless of the presence or absence of additional decor. Due to the absence of moving parts, these bath screens last much longer.

The disadvantages of solid stationary structures include the inconvenience that arises in the event of breakdowns of the plumbing system. To access it you will have to remove the entire panel.

This takes a lot of time, which can cause problems if a leak develops and water accumulates under the bathtub.

In some interiors, screens perform a style-forming function. A luxurious bright model looks very attractive if the rest of the design elements are monochromatic or made in the same style

Designs with doors are more practical than blind ones. The doors themselves can be hinged or sliding. Both options have their own advantages and disadvantages.

In most cases, bathroom owners opt for sliding models.

Hinged doors conveniently open and close, providing access to shelves with necessary small items.

However, you should not choose a screen with such doors for a small bathroom. Open, they occupy useful space and make it difficult to manipulate the elements of the plumbing system.

The doors of the sliding screens for the bathtub open, sliding along the guides. When purchasing such a system, you should pay special attention to the quality of the metal.

The stronger it is, the longer the bath screen will last. It is better to give preference to steel or aluminum.

There are models with plastic frames. They are less reliable, but are quite suitable for apartment owners who do not intend to store frequently used items such as washcloths, towels, shampoos, hygiene products, and household chemicals under the bathroom.

If doors are needed only for access to communications, then you can buy a plastic system.

Doors can swing open not only to the left or to the right. There are models with folding elements. They have the same advantages and disadvantages as swing screens

Choosing a model: important nuances

First, decide on a design that is suitable for your purposes. The most convenient options:

• Blind stationary model with a technical opening without a door. This design is usually preferred by craftsmen who do everything in the house themselves. It is simple, convenient for access to pipes, but does not involve arranging a mini-storage area under the bathroom.
• Removable stationary model without technical opening. If you choose a similar model, then try to choose a panel that can be easily removed if pipe repairs are necessary.
• Screen with hinged doors. If the bath is spacious, then no problems will arise at all. If the room area is small, carefully calculate the size of the doors so that they do not take up the entire bathroom.
• Model with sliding doors. This is a universal screen that will be appropriate in any bathroom.

When choosing, you need to pay attention to the type, dimensions, design of the structure, type and performance properties of the material

Before purchasing, measure the space that needs to be covered. Standard screens have a length of 1.5, 1.6 or 1.7 m, a width of 0.5, 0.55 or 0.6 m. There are also models of other sizes.

So, on sale you can find screens 1.05x0.5 or 1.9x0.5 m.

If you set a goal, you can find a model for any bathtub. The only difference is that among screens of non-standard sizes, models with unusual designs or with unique decor are less common.

If you are satisfied with a design with a smooth, monochromatic surface, then this option can be found in any size.

Sometimes doubts arise regarding the required width. This happens when the screen is selected before finishing work in the bathroom is completed.

Often the owner himself does not know the exact dimensions until the bathtub is installed and the tiles are laid on the floor.

The problem with selecting a model of the required width is also relevant in cases where the floors of the room have a slope. This can be solved using a screen on adjustable legs.

During installation, the legs are set to the desired height on each side.

Models with adjustable legs need to be selected according to length, because... The width can always be adjusted. Adjustable screens come in plain colors or with a variety of decorations

The best manufacturers of bath screens

As for manufacturers, there are many of them - both domestic and foreign.

Among Russian manufacturers of screens, the trademarks Techno, Vann Bok (Karavann company), Remstroyplast, Siar, Aquamate, Ecroline have proven themselves well. Their main advantage is versatility.

Russian manufacturers take into account the diversity of the sanitary products market and produce models that are suitable for installation under bathtubs of different brands.

They offer many design options, over 30 shades of colors. The materials are varied, including semi-soft panels made of non-woven material.

A big plus of domestic bath screens is their affordable price. They are noticeably cheaper than imported analogues of the same quality, but may be inferior in design and design.

Among foreign manufacturers we can highlight the Italian brands Jacuzzi, Albatros, the Finnish brand IDO and the German Kaldewei.

All of these companies produce high quality products, but often the screens are only suitable for specific bathtub models.

Sliding models of the “Professional” collection of the “Vann Bock” trademark are made in black and white colors. There are screens made of organic glass. They are equipped with beautiful chromed metal handles

Installation stages of finished models

Ready-made bath screens are completed with frames, fittings and fasteners. All this must be indicated in the technical documentation for each specific model.

Installation instructions should also be included. Before purchasing, make sure everything you need is included.

If the dimensions are chosen correctly, then for installation you will need a minimum of tools: a tape measure, a building level and a screwdriver. Before starting work, it is recommended to fill the bath with water.

If the bathtub and screen are installed at the same time, this is not necessary.

Screens may vary in shape and design, but their installation scheme is always approximately the same:

• Measurements and markings. Before installing the frame, you need to once again measure the niche under the bathtub and mark the mounting locations for the frame. If the panels do not fit slightly due to the curvature of the walls or floor, they are trimmed with a grinder.
• Installation of the frame. The frame is mounted under the bathtub and secured in accordance with the instructions; the W-shaped guide profile for sliding models is also installed and aligned.
• Adjustment of legs. If the model has adjustable legs, they are unscrewed so as to achieve maximum fixation of the frame between the floor and the side of the bathtub. To ensure that the supports hold more firmly and the screen does not shake when water is poured into the bath, you can apply a little sealant under each leg and press it to the floor.
• Fastening the frame under the side of the bathtub. When the frame is firmly fixed, the space between the edge of the frame and the side of the bathtub is filled with foam. This will add additional rigidity to the structure.
• Installation of panels. Decorative panels are installed on the frame. If the doors are hinged, they are hung on hinges; sliding doors are inserted into the guide profile. Handles are screwed to the doors.
• Seam processing. It is advisable to treat the joints with sealant. This will help protect the niche under the bathtub from moisture.

Installing screens for acrylic bathtubs has its own characteristics. Most often, these baths are pre-equipped with screens that are suitable in shape and size. Models are usually made of plastic. The kit includes frame, panels, handles, brackets, dowels, screws.

The pictures show the entire process of installing a screen under an acrylic bathtub. Installing screens under bathtubs made of other materials has some differences. For example, in cast iron models you cannot drill holes at home, as there is a risk of splitting the cast iron

If the bathtub is not equipped with a screen, then you can make it yourself from a wooden block and ready-made plastic panels. The frame is attached to the side of the bath using liquid nails, the joints are additionally strengthened by cold welding.

To secure the bottom brackets, drill holes in the floor and install dowels. After installing and adjusting the frame to size, the screen panels are inserted into the guides.

A characteristic click is a sign that they are in place.

Installing decorative panels for a corner bath may pose some difficulties. The sequence of correct installation of a corner acrylic bathtub with a screen is shown in the video:

Making and installing a screen yourself

Many of our compatriots are accustomed to doing everything in the house themselves. This can be considered a peculiar feature of the national mentality, since the desire to personally participate in home improvement is associated with masculinity.

Such craftsmen can mount the screen under the bathtub with their own hands.

The video describes in detail how you can make a blank screen with a technical niche. The panel material chosen is plasterboard, the finishing is tiles.

The range of screens for bathtubs is huge. It is very easy to get lost in such diversity. If you have difficulty selecting and installing the correct model, seek advice from an experienced professional.

This is much safer than learning from your own mistakes.

Installing a screen under a bathtub with your own hands may seem difficult only at first glance. In fact, there shouldn't be any difficulties. Let's try to understand all the intricacies of the process.

What is required to install a screen under the bath?

To install a modern bathtub design you will need:

• the bathroom screen itself;
• legs and accessories;
• a key of a certain size (depending on the model, the diameter of the base may differ);
• level.

When purchasing a product, you receive everything you need (except tools) included. You do not need to separately purchase legs for the bathtub screen, stands for the frame, guides or handles. Responsible manufacturers and suppliers also provide instructions in the kit. It describes all the main stages of installation.

How to install a screen under a bath quickly and effortlessly?

Let's look at the installation process using the example of a sliding plastic structure with an aluminum frame.

1. Insert the top of the bathroom screen under the rim (the convex lip of the bowl).
2. Place the lower part of the product, to which the metal legs are attached, so that the product is placed perpendicular to the floor (at an angle of 90 degrees).
3. Using a wrench, unscrew the legs until the top of the screen rests under the rim of the tub.

All! Installing the screen, if you follow all the recommendations, will not take you more than 10-15 minutes.

How to install models other than sliding ones under the bathtub?

Similar! The process will be no different!

If you received a sliding or other plastic structure disassembled, you will first need to assemble it and prepare it for installation.

1. Place the guides on a flat surface with the grooves facing inward.
2. Lay across the rack and line up all mounting holes.
3. Tighten the screws to securely fix all structural elements.
4. Insert the panels into the grooves and adjust the structure in height.
5. Close the ends with plugs.
6. Screw the handles (if any).

Now you know how to install a screen under a sliding bathtub, either assembled or disassembled.

Professional installation secrets

Do you want the gap between the plastic screen and the floor to be minimal? Insert the top part of the product not under the edge, but all the way to the edge. This way you will gain 1.5-2 cm and the appearance of the bath will be as neat as possible.

If you are still not sure that you can place the screen under the bathtub with your own hands, invite a specialist.

Updated: 08/23/2019 13:22:12

Expert: Lev Sagalovich

The bathroom often turns into a storage area for unnecessary things, tools and household chemicals. We habitually slip them under the bathroom, thereby spoiling the design, but there is a way out of the situation, and the specialists collaborating with the Expertology magazine know this for sure. Taking advantage of their practical experience, you will understand how to install a screen under a bathtub with your own hands without damaging the expensive structure.

What is a screen under the bathtub, and what types of products exist?

For a modern person, the bathroom is no longer just a technical room where you can wash your hands and take a shower, but a place for relaxation. What kind of relaxation can we talk about if the appearance of the room is disgusting? The cause of a deterioration in mood may be unnecessary “trash” peeking out from under a chic acrylic bathtub. A simple device can save your nerves - a screen for the bathroom, which you can buy ready-made or make yourself. The complexity of installation depends on the chosen design and material, and screens can be made of the following materials:

durable plastic and other polymer materials that are highly resistant to moisture are the most common option;

organic glass is a real decoration of the bathroom and an ideal solution for lovers of unusual interiors;

fine wood fiber boards, or MDF;

chipboard covered with a layer of laminate or chipboard;

plasterboard, and it is most often used in structures made independently.

Bathrooms are presented in a wide range on the market of sanitary materials today. You can buy a chic metal structure; durable cast iron bathtubs that hold heat well are still in high demand; acrylic products have also found their use. Manufacturers care about their image, so they do everything to make the end consumer comfortable, which is why most modern designs come complete with screens, and they have several varieties:

convenient designs with sliding doors - the option that most users prefer;

with separate hinged doors;

products with removable panels, which are suitable for those who do not plan to frequently use the space under the bathroom;

with blank panels and inspection hatches for organizing inspection and repair of plumbing pipes and fittings.

A characteristic feature of most ready-made structures is ease of installation. Having a standard set of tools, even someone who was previously familiar with plumbing can handle the task. Some difficulties may arise when installing a screen you made yourself, but even in this case there should not be any particular difficulties, especially if you use our tips on how to install a screen under a bathtub.

Installing a ready-made screen from the store

Modern bathtubs, unlike the “boring” designs of the last century, are presented in a wide variety of types, and not only the design and colors differ, but also the sizes. A large assortment of finished products makes the choice somewhat complicated, but if the measurements are taken correctly, no particular difficulties should arise. To do this, just measure the height of the structure and the width of the bathroom, and consultants will help with the rest.

You should know it! Screens are often supplied in standard versions with a width of 50, 55 and 60 centimeters and a length of 1.5; 1.6 and 1.7 meters, most bathtubs have the same dimensions. You can also agree on the supply of custom-sized products to order.

Our specialists will select a screen model that matches the design features of the bathroom and your personal preferences. You can trust the sellers, but it won’t hurt you to know that you need to choose products made of durable plastic and other waterproof materials that also have an attractive appearance that matches the interior design features. Only after making the right choice can you begin installation, and we will look at this using the example of a cast-iron bathtub.

Step #1– selection of the necessary tool, and to install the screen we will need a tape measure, a screwdriver, a building level, a wrench, and in some cases we may need sealant.

Step #2. We check the integrity of the screen structure and the delivery set, and the manufacturer must complete the product with hardware and legs for installation in the spacer - an important detail, given the different heights of the bathrooms.

Step #3. Installing the legs into the holes of the plugs, final measurements and preparing the screen for installation.

Step #4– direct installation, and for this it is enough to simply install it in the opening between the side of the bathroom and the floor. Here it is especially important to maintain the horizontality of the structure, for which a building level is used. The screen should not protrude and go inward - the ideal solution is to install it at the bathroom level.

Step #5. Height adjustment using legs.

Step #6. Installing doors or blind slabs along guides, which is also not difficult to do

If you have chosen the right screen according to the size of the bathroom, installation will not take much time, especially if we are talking about installing blind panels that are not intended to be opened and removed. The installation process for an acrylic bathtub is somewhat different, and do not forget that acrylic is a fragile and unpredictable material, so it must be handled with extreme caution. This is not difficult to do, but the process of installing a sliding screen under an acrylic bathtub will be slightly different.

To install on an acrylic bathtub, you need to make holes for the studs, which will require a drill. This must be done carefully, without damaging the stiffeners.

The next step is to attach the screen frame to the bathroom structure, using self-tapping screws.

Then everything follows the familiar pattern - the screen falls into place, and its position is fixed using the fasteners that come with the kit. If the preliminary measurements are not made entirely accurately, plastic, like other materials, can be trimmed if the size allows; it will be worse if this margin is not available. Therefore, it is better to buy the product with a small margin.

It is important! To ensure that the screen fits perfectly and is not damaged by the weight of water, installation must be carried out with a bathtub filled with water.

If you think you can handle the task yourself, or want to save on installation costs, you can try making one yourself. This is somewhat more complicated than in the case of a finished product, but not as difficult as it might seem at first glance.

How to make and install yourself

Making and installing a screen yourself will not be difficult, especially if you take the advice of our experts. Some difficulties may arise with sliding doors, so we will consider the option of making and installing a blank screen from waterproof plasterboard, which many specialists prefer to work with. We again use a capricious acrylic bathtub as a test subject.

First, let's prepare a set of necessary tools and materials for making the screen itself and its frame. We will need the drywall itself and a metal (preferably aluminum) profile measuring 75x40 and 60x27 mm. You can also use a wooden frame, but in this case the wood must be treated with waterproof impregnation. The installation sequence looks like this:

we mark the location of the frame racks, and they should be located under the bathtub, at a distance equal to the thickness of the drywall sheet;

We measure the height from the floor surface to the edge of the bathtub - these dimensions are needed for the manufacture of racks;

the outer racks are attached to the wall using self-tapping screws;

a guide profile is attached to the outer racks - under the edge of the bathtub and at floor level;

we install two intermediate posts at the location of the inspection hatch;

Pre-fitted sheets of plasterboard are installed into the finished frame, and a hatch is equipped, the design of which must be thought out in advance.

In a similar way, you can make not only a blank screen, but also install sliding structures, and for this you can use not only drywall, but also durable plastic, as well as MDF and laminated chipboard. It is somewhat more difficult to work with glass, where it is especially difficult to take correct measurements, since adjusting the size of the glass on site is problematic.

In addition to the fact that there are a large number of ready-made screens, there are a lot of interesting solutions. By showing a little creativity, you too can surprise others by making an unusual structure under the bathtub with your own hands, for which different materials and technologies can be used. We offer several options for such solutions:

Brick covered with mosaic or tiles. This design can become a real decoration of the bathroom, and you can use several design options.

A wooden screen with a step is a structure called a “podium.” It's very comfortable and looks perfect.

Natural stone is a good solution for private housing construction; in an apartment, massive stone can be replaced with stone-like cladding.

A glass screen that can visually increase the area of ​​a bathroom is a good solution for small spaces.

For lovers of romance, the carved design with lighting inside will leave an indelible impression.

Wooden panels also deserve attention, as they can highlight the sophistication of any interior design.

Concrete structures that highlight the sophistication of the loft design style and other modern trends.

We want to say that the screen under the bathroom is not a minor detail, as previously thought, but a full-fledged decorative element. With the right style, color and size, it can be the perfect complement to any design. Accordingly, a screen that does not match the overall design can ruin the overall picture. Therefore, his choice must be approached carefully, taking into account all the pros and cons.