How to hide pipes in the bathroom - Tricky advice from professionals! (79 photos). How to hide pipes in the bathroom: ideas and methods How to hide pipes under the sink in the bathroom

Uncovered communications protruding from the walls can spoil the impression of the highest quality repairs. Therefore, during renovation work, the question inevitably arises of how to hide the pipes in the bathroom so that the interior looks stylish and beautiful. Each master or owner of the premises solves the problem in his own way, because there are many options for masking sewer and water pipes.

But before you cover the pipes in the bathroom with a screed or hide them in the wall, you need to understand that not all connections and pipelines can be sealed.

So, hidden installation is not applicable to all communications. With well-made collector wiring, when a separate pair of pipes is installed to each point of consumption without unnecessary connections, the problem of how to hide sewer pipes in the bathroom ceases to be a problem, since in this case any option is suitable. But sometimes there is a need for additional insertion or extension of the pipe, which requires the presence of a connection.

Some of these connections will be reliable, and they can be safely closed into walls or screeds without fear of unexpected leaks. The following types of pipeline and sewer lines can be sealed:

• welded connections of steel pipes;
• soldered copper connections;
• press fittings for cross-linked polyethylene;
• high-quality press fittings, correctly crimped with construction pliers.

Other types of wiring must always be accessible for ongoing maintenance, repair and replacement. You cannot hide pipes in the bathroom if it is:

• threaded connections of any pipes;
• threaded fittings on metal-plastic pipes, clamped with keys.

Such connections will weaken or become unusable over time, and then leaks cannot be avoided. If the wiring is not bricked up, then during periodic inspection you can notice a leak and take measures to eliminate it. Otherwise, a weak connection or loose threaded fitting hidden in the wall will make itself known not to you, but to your neighbors, in the form of flooding of their living space. And in addition to having to destroy your own walls or floors, you will have to pay for repairs from your neighbors.

Pipeline camouflage rules

In order for the room to look stylish and at the same time all communications work properly, you need to know how to properly disguise a particular pipe, connection, or wiring. There are several simple rules for removing pipes in the bathroom that should be followed when carrying out renovation work:

1. Make wiring with a minimum number of connecting elements.
2. Use connections with the same strength and material as the pipes.
3. Even if you are sure of the reliability of the wiring, it is better to provide a small camouflaged hatch at the connection point so that you can check the pipeline.
4. Use insulation to allow pipes to expand freely and prevent condensation.
5. Draw up a wiring diagram in advance, correctly placing all pipes and connections.

When developing a diagram of how to close the pipes in the bathroom, you need to consider:

• suitability of walls for gating (type and thickness);
• pipe diameter;
• the presence of waterproofing and reinforcement of the floor screed, its thickness;
• pipeline route.

So, there are several proven ways to close sewer pipes in the bathroom or piping. Let's consider each of them separately.

Masking communications with furniture

The easiest way is to hide the pipes in the bathroom behind built-in or wall-mounted furniture; this option is relatively cheap and quick. If the pipes are arranged vertically, you can purchase a cabinet of the required size. The back wall is removed and cutouts are made in the top and bottom panels. As a result, we get a cabinet with pipes inside.

But this option has one serious disadvantage. In places where pipes are located there is constantly high humidity, to which almost all furniture is sensitive. You can treat the cabinet with a special solution, but this is a rather long and expensive operation.

Installation of pipeline into the wall

This method is good if redevelopment is being done or the house is under construction. In order to close the pipes in the bathroom, you will have to tap into the wall, but it is worth remembering that in a panel house such work in the horizontal direction is prohibited. Also, in many cases the walls are quite thin for such work.

With this type of installation, you should not use metal pipes, as well as communications with threaded connections. One of the important aspects of such work is the correct routing of pipes, and if there is cladding, you also need to take into account the thickness of the tiles. After this, thermal insulation is laid. The final touches are only plastering and cladding.

This type of camouflage helps make the room more spacious and gives a more attractive appearance. The downside is that if there are leaks, getting to the pipes will be much more difficult.

How to disguise pipes in boxes and niches?

One of the simple and convenient methods of redevelopment is making a box from plasterboard. To do this, you will need a metal profile or wooden planks of the required length and cross-section and the plasterboard itself; all of this is used to construct a structure that will need finishing. The design made of plastic panels is easier to install.

The same method is used to make niches, which are also covered with plasterboard, but they allow you not only to hide the pipes under the plasterboard, but also to accommodate a washbasin, washing machine, etc.

One of the disadvantages of this method is that it takes up a large area, which plays a big role in small areas. Therefore, before sewing up the pipes in the bathroom with plasterboard, you need to make accurate calculations of the area.

How to hide pipes using a special screen?

Nowadays, stores offer a wide selection of screens that solve the problem of how to hide communications. It looks like a frame with two rails to which plasterboard or plastic panels are to be attached.

This design is relatively cheap and at the same time looks quite aesthetically pleasing. You can also add that it can be dismantled quite easily, which makes it easy to get to communications in the event of an accident. The only downside, like niches with boxes, is that they take up a fairly large area.

Practical application of roller shutters

Roller shutters for hiding pipes in the bathroom are used very rarely, which is undeserved. These are practical, movable structures, similar in principle to horizontal blinds, that perfectly hide niches in walls with communications.

By the way, the word blinds translated from French as “jealousy”. According to folk etymology, jealous Frenchmen, when leaving home, closed the windows of their houses with special devices, a prototype of today's blinds, so that envious passers-by would not look at their beautiful women. There are more than 1000 French words in the Russian language, which we often use in speech without knowing their origin and true meaning.

Advantages of roller shutters:

• ease of installation and dismantling;
• practicality in everyday life;
• mobility, providing wide access to the pipeline.

Flaws:

• applicable only to niches and boxes;
• It’s difficult to do it yourself, so you need to order roller shutters from the manufacturer.

Step-by-step instructions on how to cover a pipeline with a plasterboard wall

This design is very easy to install and quite affordable. The best option for installing such camouflage is in uninhabited premises, where the installation location of the partition is determined by the owner. This method is suitable for large bathrooms.

Before you begin installing the wall, when using steel pipes, they must be prepared in advance, cleaned of old layers of paint (if any) and painted.

Initially, you need to prepare all the tools and materials that will be needed in further work.

And you can start creating the frame:

1. Using a level and plumb line, the contours of the future wall are outlined.
2. A guide profile is attached using dowels along the contours marked on the walls, floor and ceiling.
3. A rack profile is installed, which is attached to the guide using self-tapping screws.
4. To strengthen the structure, transverse beams are installed.
5. We install, that is, we hide the pipes.
   

   We must remember! Pipe routing must be done during the creation of the frame. In this case, it is necessary to take into account the thickness of the drywall and, if tiling is carried out, then the thickness of the tile.

   Now we begin the process of covering the constructed frame with plasterboard:
6. Parts of the required dimensions are prepared. To speed up the process, it is recommended to perform this operation in advance.
7. The sheets are fixed with self-tapping screws; their type is determined by the materials used during installation. They should not deepen the caps too much.
8. Excess sheet protrusions are removed with a jigsaw or hacksaw. But if its length is not sufficient, then the joint should not fall on the crossbar.
9. Holes are cut for the inspection hatch and pipe outlets.
10. At the junctions with the floor, walls and ceiling, all cracks are foamed.
11. A door is installed to access the valve and riser.
12. When the structure is ready, it is covered with putty, and the joints are glued with sickle tape.
13. When the putty dries, the wall is sanded and coated with primer.
14. They carry out finishing work: tiling, covering with liquid wallpaper, etc.

Thus, when deciding how to hide water or sewer pipes in the bathroom, follow our tips and masking rules that apply specifically to your type of wiring.

There are different ways to hide pipes in the bathroom; the choice of the appropriate option depends on the location of the communications. In most cases, it is necessary to cover the floor and walls, this is due to the fact that several pipelines pass through this room. If the bathroom is combined, the sewer pipe is also closed. To create boxes, various types of materials are used, but they must be characterized by a low level of water absorption.

If you are interested in the question of how to properly hide pipes, you should consider some rules. The most important are the following:

• when installing communications, it is necessary to limit the number of transitions (connections);
• in order for the pipes to last longer, it is recommended to install fittings made of the same material as the communications, but in this case there are exceptions, for example, if a section of pipe made of plastic and metal is connected;
• it is important to take into account the need to provide access to the most difficult areas (valves, wiring units); special hatches are often used for this purpose;
• Before hiding pipes in the bathroom, they should be protected from condensation, for which waterproofing materials are used.

First, the type of wiring is determined: hidden, open. The first option involves the need to chip the walls. It should be remembered that in this case there will be no access to the pipeline. If this method of hiding communications is chosen, additional space will be freed up during installation. Open wiring involves the need to lay pipes along the partitions. This means that you will need to additionally allocate space for installing the box.

Methods for masking pipes

The water supply system can be hidden in the bathroom in different ways. There are many options for open mounting. In this case, the pipes are masked both when laying on the wall and on the floor. Use the following options:

1. podium;
2. box;
3. false wall with a secret niche.

Other camouflage methods require laying communications in a layer of cement mortar. For this purpose, it is permissible to use only polypropylene and copper pipes. The method of connecting communications by cutting threads at the ends is not suitable for this. To hide pipes in the bathroom, welding technology is used.

Choose the appropriate method, taking into account the area of ​​the room. They estimate how much free space will remain in it after installing furniture (wardrobe with shelves, bedside tables, etc.), as well as appliances (washing machine, dryer).

In the bathroom wall

This method is not always used, because it has a number of restrictions on its use. It is implemented by gating the walls. In this case, a small cutout is made in the partition, the dimensions of which correspond to the diameter of the pipe. It is recommended to leave gaps. The cutout should be made slightly larger for laying hidden communications with hot water. This is due to their ability to expand under the influence of coolant. There are a number of factors to consider:

• In a panel house, it is prohibited to make horizontal grooves on the walls, as this leads to a decrease in the load-bearing capacity of the structure;
• in order to close the pipes in the bathroom without the risk of reducing the safety level of the facility, it is recommended to take into account their intended purpose, for example, a sewer riser cannot be hidden in this way, since its dimensions exceed the depth of the partition;
• before starting the gating, markings are made; it is recommended to plan the layout of the pipes in the wall so that this does not lead to a decrease in the intensity of water movement inside the communications;
• It is impossible to perform grooves in load-bearing walls.

If you need to disguise the wiring node, but it is not possible to use the option of installing a plasterboard box, you should consider the gating method. It is only used if pipes run along walls. For cases where communications are located on the floor, gating is not advisable. In this case, the pipeline is filled with cement mortar.

An angle grinder is used to cut the wall. To work, you will need a diamond-coated cutting edge. First, notches are made in small increments, slits for the future groove, then excess concrete is removed. To do this you will need a hammer and chisel. To simplify the task, use a hammer drill with a special attachment.

Communications are laid in the finished grooves. All that remains is to fill the leaks with plaster composition. Then the cladding is done. In case of an emergency, removable plastic panels or special hatches are installed in places where valves and fittings are inserted, especially with threaded connections.

There is another option - installing false walls. In this case, the entire area of ​​the partition is closed: from the ceiling to the floor. Communications are hidden between the false wall and the rough surface. Such structures are easy to install.

Unlike the gating method, the installation of a false wall can be done even after the room has been finished.

In the screed

To hide pipes in the bathroom in this way, you only need the ability to work with cement mortar and a little experience in leveling the floor. The disadvantage of this method is the inability to repair plumbing communications in the event of an emergency. The pipes are completely hidden in a layer of cement mortar. If a leak occurs, the screed must be removed. Another disadvantage of the method is the difficulty of determining the exact area where the integrity of the pipes was compromised.

The advantages of using screeds include a relatively simple process of performing the work. In addition, the attractiveness of the interior is maintained. Pipes should be protected with thermal insulation material to avoid condensation. A common option is to disguise communications first in corrugated tubes, then in a screed. Moreover, the pipeline should be laid along the shortest route. The screed should rise 2-3 cm above the communications. Finishing work is carried out when the cement has dried.

Bathroom podium

In this case, there is no need to place the plumbing fixture on top of the constructed structure. This will increase the height of the bath. In addition, it is heavy, and the materials available for installation will not withstand such a significant load. To hide sewer pipes in the bathroom (or water communications), create a kind of podium around the plumbing fixture.

The advantage of this method is the attractive appearance of the structure, which is an elevation with several steps. The podium is built in rooms that are characterized by a large area. It will not be possible to decorate pipes in a bathroom of standard dimensions in this way.

Cover with a plasterboard box

This is the simplest and most accessible method of masking communications. With the help of plasterboard, structures of any type are created: one-, two-level. The advantage of this method is its simple installation. The disadvantages include the sometimes inorganic design of such structures. In addition, they hide the space in the room.

To close the pipes in the bathroom, first of all, they calculate which box configuration is best suited for the room. If the wiring of the plumbing system will be masked using plasterboard, tiling can be done on top of the structure. If there are a lot of pipes in the bathroom, false walls are created.

If the box is large enough, the internal space can be used at your discretion. It is often possible to install shelves for storing detergents behind the front panel. To sew up the pipes in the bathroom, create a frame for the box. Then sheathing is done using plasterboard. The surface is treated with a primer. The tiles are finished using a special adhesive.

During the installation process, the possibility of installing plumbing hatches should be provided. If the pipe distribution is extensive, several valves and a sufficient number of fittings are provided, and inspection (plumbing) hatches are installed in all important areas. Moreover, it is advisable to make the holes in the box somewhat larger in size than required, since in the event of an emergency it will be necessary to provide a wide viewing angle for the pipes.

Disguise with furniture and screens

They use ready-made interior items, for example a closet, a pencil case with shelves. However, it is difficult to choose a product that exactly matches the area that needs to be masked. It is better to make a structure that looks like a fully functional piece of furniture, taking into account the size of communications.

Most often, cabinets are created: under the sink, near the wall with a sewer/water pipe. To make the structure look beautiful throughout its entire service life, it is recommended to use moisture-resistant materials: gypsum fiber board, laminated chipboard. The first option requires finishing (pasting, painting). Using this method, you can hide the pipes in the bathroom, providing full access to the entire length of the water supply system within one room.

Plastic screens are used. They come in different types: stationary, sliding. If the room is small, it is preferable to use a fixed or removable screen. In large bathrooms, a sliding panel is installed for ease of use.

Roller shutters

Such structures are installed not only outside objects (to protect windows and doors), but also indoors. With their help, it will be possible to close the riser in the bathroom along its entire height. As a result, it becomes possible to quickly get to communications if the need arises. The roller shutters can be locked with a key, so children will not have access to the pipes.

The disadvantage of such designs is their unattractive appearance. Roller shutters can rarely be successfully integrated into the design of a room. In most cases, such designs stand out against the background of the interior.

What you shouldn’t hide and possible mistakes

It is forbidden to mask areas of communications in the bathroom where there is a high probability of leakage. The places where valves and fittings are located, especially if these elements are installed using a threaded connection, are considered to be most exposed to the load exerted by water passing through the pipes. Close seamless communications. In this case, the probability of leakage is low.

Possible installation errors:

1. the load-bearing wall is cut, and a significant amount of concrete is removed, which will lead to a decrease in the load-bearing capacity of the structure;
2. valves, fittings, water meters are hidden from view, and there are no inspection hatches, which eliminates the possibility of free access to these components;
3. When laying the communications, they were located incorrectly: there are many transitions (elbows), the slopes of the pipes were not observed;
4. During the masking process, no waterproofing materials were used to protect the pipeline from condensation.

If these mistakes are made, the quality of service to the water supply system decreases.

To properly hide pipes in the bathroom, you need to familiarize yourself with the key rules of the process. Before hiding communications, you need to think through the design of the future decor in such a way that there is access to the pipes. Meters, as well as threaded connections, should be “at hand”. Knowing the rules, you can avoid mistakes and shorten the repair period.

• make sure communications are functioning correctly. Many people forget to provide a slope to the sewer pipes when closing them behind the box;

• when water or sewer pipes are hidden, it is necessary to provide access to the taps. To do this, an inspection hatch should be installed in the box;
• Threaded connections are the weakest points of pipes. Therefore, you need to monitor the tightness of the joints and the condition of the sealant used. You also need to make plumbing hatches that will allow you to make repairs if a leak occurs;
• Before closing communications, you should decide on the location of household appliances. If you neglect this procedure, difficulties may arise in the future with the installation of new equipment.

Many mistakes can be avoided if only high quality materials are used in the work. It is also important to be careful during repairs. Neglecting these rules will lead to leaks in the future, which will lead to disassembly of the box and expensive repairs.

To learn how to make a box in the bathroom in 30 minutes, see the following video.

Problems and their solutions

Don’t think that warm walls are easy to implement. There are inevitably a number of specific problems that have to be solved.

Thermal expansion

When heated, the pipe itself and the plaster with which it is walled expand. The inevitable appearance of cracks has already been mentioned. How is this problem solved?

An integrated approach is used.

1. Heating is done at low temperatures. As a rule, no higher than 40 degrees. In this respect, the project is similar to a heated floor: the wall should not burn when touched.
2. Materials with a minimum coefficient of thermal expansion are used. Typically, pipes are made of metal-plastic or cross-linked polyethylene.
3. Plaster with the addition of plasticizers is used. It tolerates inevitable expansion and contraction over a small range without cracking.

Heat loss

A heated main wall will dissipate heat not only inside the house, but also outside. To prevent this from happening, a layer of thermal insulation - mineral wool or polystyrene foam - is laid between the coolant pipe laid along the wall and the wall itself.

Of course, the instructions are not universal - not everywhere there is a need for insulation:

• If the coolant circulates in one of the internal partitions, there is not the slightest sense in insulating it. Let it heat both adjacent rooms.

If you need to distribute heat unevenly, the problem can be solved by partial thermal insulation on one side of the partition.

• If the house is made using energy-saving technology - from sip panels or concrete in permanent foam formwork - thermal insulation will not at all change the already extremely low heat dissipation through the walls.

fault tolerance

It is desirable that the heating in the walls does not require repairs or maintenance. How is the longevity of a heating system achieved?

Exactly the same as in the case of heated floors. A single pipe is embedded in the plaster, without fittings or connections of any type. The optimal choice is cross-linked polyethylene: the pipe has excellent flexibility and is supplied in coils up to 200 meters; at the same time, the price per linear meter with a thickness of 16 millimeters will not exceed 50 rubles.

All regulators, manifolds, thermostats and throttles are located outside the wall, in a place convenient for adjustment and maintenance.

Find out also about the benefits of plastic heating pipes.

The collector is placed in an easily accessible place. From here you can control the temperature throughout the house.

Decorative covers for heating pipes

The most problematic area when laying communications is considered to be the area near the entrance and exit of the heating pipe: in this place it is extremely difficult to make a neat cut and lay the flooring evenly.

Advantages of decorative elements

You can avoid an unaesthetic appearance by decorating the joint with decorative overlays specially designed for heating pipes.

When installing laminate flooring correctly, it is recommended to leave a small gap of material around the pipes in case the flooring becomes deformed. Decorative overlays in the joint area will help to hide it.

Such details not only give the room a neat look and decorate the interior, but their wide range allows you to find a model that matches the style of the room - from classic to art nouveau and avant-garde.

In addition, the pads are extremely practical. When carrying out general cleaning, cosmetic repairs or changing the coating, parts can be removed, and after completion of work they can be washed and reinstalled.

Materials for making overlays

Decorative products can be made from different types of materials. The most common elements for the manufacture of which are used:

• plastic;
• various types of wood.

Depending on the design, decorative products may have a corrugated, smooth, or polished surface; be plain, with patterns or imitation of various materials (stone, mother-of-pearl, cork).

The most expensive are wood overlays. To replace them, you can use MDF parts that imitate wood structure, but you must keep in mind that the service life of the latter is much lower (5 years versus 10 for natural wood).

Decorative elements have a variety of designs. They can be either single or double, designed to be fixed to two heating elements at once

When choosing decorative covers for heating pipes, you must carefully select their size, which should correspond to the diameter of the pipes, and also pay attention to the consistency of color and texture with the design of the room. . Tips for installing decor

Elements in the form of rings (they are also called rosettes) have a collapsible design. As a rule, they consist of two parts connected using internal locks. The structure is disconnected, put into the girth, after which the gap is closed and the element snaps into a fixed position.

Although decorative overlays have a reliable fixation system, it is still recommended to glue the joints, especially when installing parts under the ceiling

Installation of such products takes a minimum of time (no more than one minute) and is not difficult. It can be carried out even by beginners who have never done repair work. If necessary, the element can be easily removed by opening the lock.

In addition to rings, other types of masking of joints can also be used, for example, decorative binding made of jute rope or parts made of special heat-resistant fabrics. Such design options have an original appearance and are also characterized by good thermal insulation properties, which helps reduce heat loss.

Features of factory products and homemade products

All structures designed to hide heating systems can be divided into two large categories: ready-made devices and specially made boxes

Option #1: factory-ready devices

Such devices are purchased in specialized stores, where a large assortment of products of different colors, sizes and designs is presented. The shape of such structures can be angular, rounded or rectangular.

The first option is especially convenient in the corners of the room for masking risers, and also if the heating system is located close to the ceiling or floor. Other modifications are perfect for pipes that are laid along the perimeter of walls and a free-standing riser.

There are various options for such products. The most common are plastic boxes, which are easily installed around pipes on a metal frame

When choosing such options, it is advisable to pay special attention to the quality of the material, since low-grade polymers under the influence of heat can turn yellow, swell and lose their appearance

Metal boxes can be painted with durable dyes that can withstand prolonged heating. Such elements prevent dust from settling on the pipes, making cleaning easier

Boxes made of regular or perforated metal look very impressive. If a practical goal is being pursued, it is better to give preference to the second option, since thanks to the holes, metal elements provide better heat transfer.

Another option is budget designs made from MDF, which have an attractive appearance and good performance. The disadvantages include a small model range, which is dominated by “blind” devices without holes, which reduces heat transfer.

Option #2: self-made structures

Despite the significant selection of ready-made boxes, do-it-yourself designs are very popular. They not only allow you to save money, but also allow you to ideally solve the problem of how to ideally hide heating pipes in the interior, taking into account the exact dimensions and style of the room.

Boxes and linings for heating communications play not only a decorative role, but also perform a protective function, eliminating direct body contact with a hot pipe, which could lead to burns

The most popular materials include:

• Brickwork. An effective, but rather complex method of camouflage, for which you will have to put in a lot of work. In addition, such a box can hardly be disassembled if necessary.
• Drywall. By far the most common material.
• Plastic lining attached to a frame made of metal or wood.
• Boxes made of natural wood. Eco-friendly designs that decorate any interior; usually made to order.

The choice of material for manufacturing depends both on the room design project, as well as on personal preferences and financial capabilities.

How to properly hide pipes in the bathroom and other rooms

Important to remember! The arrangement of space cannot be at the expense of practicality and ease of use of such important life support systems of the home as heating, sewerage and water supply. These are communications that require constant monitoring and care, so it is impossible to completely hide them and forget about their functioning, no matter how reliable they are

Properly hiding communications means making the most convenient access to all important parts of the systems: ball valves, valves, water meters, node connections and fittings, filters for rough water purification, main filters and more.

An example of masking pipes in a bathroom with possible access to them

This is necessary to:

• close the ball valves at the system inlet;
• take readings from meters conveniently and easily;
• change hot and cold water meters (they require regular replacement and sealing);
• monitor possible leaks and the connection of key parts in general;
• have access to sewer system components and siphons;
• It is also here that the water and water floor heating systems are regulated.

And the main thing is that the planned replacement of these parts or unexpected repairs of plumbing does not require the destruction of the entire lovingly thought-out design and comfortable environment.
For all these purposes, the so-called “plumbing hatch” is used - the wider, larger and more convenient it is to use, the better.

Basic rules of camouflage

• Minimum number of connections. We have already mentioned that such places are the most problematic and prone to depressurization, so try to make sure there are as few of them as possible. This can be achieved by enlisting the help of professional plumbers who can draw up competent wiring plan.
• Using the same materials. If the presence of connecting elements is unavoidable, then they must be made of a material identical to the material of the pipes. Thus, you do not have to worry that their linear expansion coefficients or tensile strength will be different.
• A viewing window is required. Obviously, if you have water meters, it is necessary to take readings from them, and once every few years, submit them for verification. Therefore, it is worth immediately providing quick access to them. A small hatch with a removable door will do the job perfectly. Also, such an element is required in places where there are many connections or water filters. At any time you can monitor their condition and eliminate the leak in time.
• Don't neglect insulating materials. This rule is especially important for pipes with cold water. After all, condensation very often collects on them. To avoid this, use a special insulating casing made of foam rubber or thermoflex. In case of masking hot pipes in the wall, it will allow them to expand safely.

Photos in the interior of the rooms

Kitchen

The kitchen is the ideal room in which all ways to hide batteries will become practical and convenient. If the room is small, then you can hide the radiator with the help of a beautiful tabletop or make a folding table, which will fold out when convenient.

Factories of metal-plastic structures offer a large selection of beautiful large-sized window sills that imitate stone, wood and other materials. A modern window sill does not break under weight, is not afraid of external factors, is easy to care for, wipe clean, is not afraid of scratches, and so on. You can hide any type of battery in this way, including cast iron.

In the photo, wooden boxes are used to disguise the radiators.

Living room

If the radiator is in a niche, then a wide window sill will help create a work area.

You can place souvenirs, vases or potted flowers on the constructed wooden box. You can also cover unsightly radiators in the living room with thick curtains.

The photo shows a modern living room. In order to hide the radiators, a wooden structure was installed, which also serves as a place for rest, storage and decoration.

Bedroom and children's room

In the interior of a bedroom and children's room, batteries can be used as another place to relax, a tabletop for decorative elements or a workplace.

Bathroom

You can hide the pipes in the bathroom using a louvered door, plastic grilles or a cabinet with opening doors.

We hide heating radiators using wooden, glass or plastic screens.

In the photo, the radiators in the bathroom are hidden using a wooden box.

Hallway

For radiators in hallways, glass screens or wooden boxes are suitable. In a small room, covering the battery is only necessary from a practicality point of view. This could be a locker for storing shoes, or the battery will become a small coffee table where keys and other necessary items will be stored.

Two main ways to cover horizontal pipes

The first method is to hide the pipes under drywall; the principle of work remains the same as when laying vertically. During major renovations, water pipes can be hidden in the floor screed. This is not as difficult to do as it seems.

Required tools:

• level;
• shovel;
• rule.

Materials used:

• waterproofing material for floors;
• pipe insulation;
• lighthouses;
• cement-sand or concrete mixture.

1. They do the piping.

   The pipes lead the shortest route

2. Lay waterproofing on the floor.

   Waterproofing is laid on the floor and applied to the walls

3. Beacons are installed.

   The height of the beacons should be higher than the height of the pipes

4. A cement-sand or concrete mixture is poured between the pipes.
5. Focusing on the beacons, level the mixture.

The horizontality of the screed is checked with a level

The pipes in the bathroom can be left open or hidden. From an aesthetic point of view, the second option is preferable. But with this method, the reliability of the pipes and their connections is of great importance. If there is a risk of emergency situations, it is better not to pack the pipes hermetically. In this case, they can be hidden behind roller shutters or furniture doors. When chosen correctly, such elements will give the bathroom an interesting, modern look.

Methods for hidden installation of heating pipes in a private house

Heating pipes in a private house can be hidden in the floor, in the walls or under the ceiling.

Installation of a heating system with in-wall wiring

1. A plan is drawn up in advance and a drawing of future communications is prepared. Indicate the locations of the outlets to the radiators and the locations of the threaded connections.
2. In concrete or brick walls, according to the drawing, recesses (grooves) are made for pipes. The size of the recesses is calculated based on the diameter of the pipe + the thickness of the thermal insulation + the layer of mortar for sealing the grooves.
3. Along the entire length of the recesses, mounting brackets are installed that will hold the pipes.
4. The pipes are covered with heat-insulating material, connected and secured to brackets.
5. The grooves are sealed with mortar, or the walls are covered with plasterboard.

Note! In its finished form, the heating system of a private house looks like free-standing radiators. They are decorated with protective screens in the style of the chosen interior.

Installation of a heating system with camouflage “in the floor”

When laying a heating pipeline under the floor, two installation options are possible: with and without thermal insulation of the pipes. The option of laying heating communications in the floor with thermal insulation differs little from embedding it in the walls.

If the floor is concrete, then it is grooved. The dimensions of the niche are calculated taking into account the diameter of the pipe and the volume of thermal insulation. The pipeline is hidden in the made niches. If it is wooden, then it is mounted on joists.

When embedding the pipeline into the floor, it will be necessary to provide for forced pumping of water in the system. Why install a pump?

The second option to hide heating pipes under the floor is to install a heating system without radiators, called “warm floors”.

False wall

The construction of a second, decorative wall made of plasterboard is a good option to hide heating pipes in a private house.

A false wall is justified if:

• house walls made of logs or timber;
• several communications converge in one place;
• communications have many detachable connections;
• the pipeline is not new;
• cosmetic repair.

Here the brackets can be mounted on the walls without cutting out a niche. After installing the pipeline, the walls are covered with plasterboard.

False panel or decorative box

Sometimes it is beneficial in an interior to sew up not the entire wall, but up to a third or two-thirds of its height. This panel is called a decorative horizontal box.

It allows you to hide not only pipes, but also heating radiators behind its perforated segments.

You can play it in the interior:

• as a decorative shelf for jewelry;
• false fireplace;
• decorative panel.

The color scheme will change the visual perception of the space of the room. The internal lighting behind the lattice segments of the false panel will look advantageous.

A plasterboard box is an excellent solution for budget masking of heating pipes in both a private house and an apartment building.

Note! In an apartment where heating is centralized, installing decorative elements on pipes and heating radiators leads to uncompensated losses of heat supply. On average, you will have to overpay for the lost 10-15% of thermal energy.

Algorithm for installing decorative panels or boxes:

• install a frame made of wooden beams or aluminum guides;
• plasterboard or perforated panels are sewn onto the frame.

Typically, combined frame cladding is used, when the vertical pipes are covered with solid material “under the wall”, and the horizontal segments are covered with perforated material for better heat transfer.

Since radiators are placed under windows, the installation of an additional panel can significantly increase the area of ​​the window sill. This moment brings a lot of joy to lovers of house plants.

Note! Decorative boxes or panels can be sheathed not only with plasterboard, but also with other synthetic or natural materials.

Camouflage under the ceiling

Hiding heating pipes under the ceiling is not a popular solution, but it does happen.

Schematically it looks like this:

• The heating pipeline wiring is mounted and secured under the ceiling;
• It is necessary to have thermal insulation on the pipes;
• the entire structure is covered with a suspended ceiling.

This method is justified when installing an autonomous heating system for a private house on several levels. When on the first floor the wiring is under the ceiling, and on the second floor - along the perimeter of the floor.

Advantages

We have become familiar with the problems. Well, what do we gain compared to traditional heating with radiators?

• The aesthetics of the room is entirely in the hands of the designer. We are no longer tied to clumsy structures under our windows; Those same risers and eyeliners that you so often want to get rid of are no longer an eyesore.
• Heat is distributed more evenly, since the heat transfer area is many times larger. There is no pronounced cold zone above the floor: the pipe is laid along the entire height of the wall.

Advice: aluminum plates - heat spreaders will increase the heat transfer of the wall and make its heating more uniform. In addition, they will allow you to get by with a shorter pipe length, increasing the distance between turns.

• Uniform distribution of heat will reduce the average temperature in the room without compromising the comfort of the occupants. A simple decrease in temperature by two degrees will reduce the need for thermal energy by 15-20 percent.
• Do you remember how cozy it is in the winter near the battery? The feeling of comfort will be with you all the time: after all, the walls are always next to you and always radiate warmth.
• In the summer heat, you will have an easy way to make the climate in your home more comfortable. It is enough to use the circuit in the wall for water collection.

As a result, you will kill two birds with one stone: noticeably warmer water will be supplied to the mixer, and the house will become cooler. You see, water supply lines run through the soil, which below the freezing point has a stable temperature of 10-12 degrees all year round.

No one can describe the merits of a solution as clearly and convincingly as its seller.

We hide the pipes in the wall. Work order

The decision has been made, the system has been designed, how can we hide the heating in the wall or floor?

• The first thing you need to do, if we are talking about walls made of traditional building materials (brick, building blocks, shell rock, etc.), is to break through the grooves - the channels into which the pipes will be laid. The width and depth of the channel is taken from the calculation of the diameter in the thermal insulation.
• The pipes are laid in channels and secured with special clamps. These clamps are attached with self-tapping screws to the walls or floor (when laid in the floor).
• Having assembled the system, it is launched and tested for some time at excess pressure. Only after the heating has worked at elevated temperatures and elevated pressure for several days, and there are no leaks, can the grooves be closed.
• The holes in the wall are covered with mortar, then puttied and brought into line with the appearance of the entire wall.

It is necessary to punch holes and lay pipes in them

One important detail: you must have a detailed plan indicating the location of the pipes in the walls. This is necessary so that during the next repair or some kind of work you do not accidentally damage the heating (drill a hole for the dowel and you will get into the main line... that's all you need to worry about).

Similarly, they hide the walls in the floor screed. There are practically no differences. Unless, for convenience, they tend to lay everything in one wide groove, from which they are then routed in the desired direction. If you have not made a screed yet, then lay the pipes (in thermal insulation), and then make the screed. And again, keep the communication plan.

They hide communications in the floor screed in the same way: in a groove

It will be a little easier to lay communications under the plank floor - there is usually enough space there to hide the pipe in the heat insulator. The only thing, probably, is to lay it in such a way that by removing one or two boards if necessary, you can get maximum access to the highways located under the floor (just in case).

how to decorate a heating pipe in a room photo options

In a private house or new building, hiding them will not be difficult, but in an old-style multi-story building, especially in an apartment with a small kitchen, it is much more difficult. Moreover, during the construction of Khrushchev houses, non-galvanized steel risers and heating pipes were installed, where the threaded connection could sooner or later rust and leak.

How to decorate heating pipes in a room photo

In addition, risers and outlets in poorly heated houses and apartments can contribute to additional heat transfer in the room. The most suitable method to close heating pipes in such houses is to decorate the pipes themselves.

The main tool for decorating them will be your imagination.

Also of no small importance will be the correct selection of available materials that match the overall interior of the room. Let's next look at some interesting ideas with photo illustrations on how to disguise heating pipes using a decorative method that will help create a flow of fantasy to suit your situation

1. One of the available solutions for all rooms is to simply paint the wall to match the color, giving it a uniform color, a method that is still used not only by many residents of communal apartments, but also by the majority of guests of private houses. As you can see, this solution is quite simple and does not require special skills or costs.
2. or in the kitchen, you can paint the pipe in a copper-golden color, adding artificial flowers with shades that match the interior and the color of the pipe, which as a result can be a good decorative way to hide the heating riser.
3. As a decoration option, in the kitchen, a vertical heating pipe can be wrapped in small lassos with rope, and in the upper corner of the ceiling, large artificial green leaves can be secured, which can result in an exotic, beautiful palm tree look.
4. If you have a little artistic ability, then by taking advantage of the opportunity to remove the gloomy heating risers in the wall using paint, you can revive a beautiful tree in accordance with the interior of the room.
5. In pursuit of decorating pipes, in a small apartment, from an ordinary riser painted white, you can grow an artificial birch tree, which will harmonize perfectly with the overall interior of the apartment.

In a flight of fancy, you can endlessly come up with different ways to hide pipes and heating risers using the decoration method, the limits are only in your imagination.

How to decorate heating pipes in a room photo

I think after studying the material, as well as viewing the photos, you will not have any questions about how to close heating pipes. If you have any questions or additions, leave your feedback, we are always happy to respond.

Heating pipes in the wall

When constructing any house, various utilities are installed. Vital (and mandatory for a residential building) include electricity and water supply, sewerage and heating. And if in city apartments the owners are already faced with the fact of concrete pipe laying, then in a private house the owner himself chooses where and how to install them.

Many are not satisfied with the large number of them, and in plain sight, in every room. It is clear that without these highways it is impossible to ensure comfortable living. But they stretch along the walls and, striking the eye, clearly do not add attractiveness to the interior of the rooms. Therefore, the idea often arises about laying a heating pipe in the wall .

It would seem that this is a good decision. The pipes are no longer visible and the overall appearance of the room is improved. Moreover, doing this in a private home is not so difficult. But is it really that simple?

Things to consider before laying pipes:

The most common malfunction of any pipeline is depressurization of joints separate parts. It is at the joints of pipes that leaks often occur. But how can you see them if the heating pipes are in the wall? A decrease in the volume of coolant in the system can be determined by the readings of the water pressure sensor, which is equipped with any modern boiler. The pressure has dropped, which means there is a leak somewhere. The fact itself is recorded. But how to determine the place where the “defect” occurred? Are the pipes hidden? Second question. Even if the location is determined, how to make repairs?

• If a decision is made to lay heating pipes in the wall, then it is worthwhile to arrange the surface finishing so that, if necessary, get free access to the damaged area. Therefore, it is preferable to do the cladding, for example, with clapboard, plastic panels, plasterboard or similar finishing materials. The use of various decorative plasters will lead to the fact that part of the wall covering will have to be opened. Is this advisable?

• During installation, you need to take this point into account. If the pipes are plastic, then you can “cover” them with a layer of plaster. But before that, carry out strength test connections under pressure exceeding the design pressure for the system by at least 1.5 times. But in the case of using metal pipes, plaster should not be used. Over time there will be leaks. This is a feature of metal compounds.

Heating pipes in the wall will, by definition, heat up. And any material in this case increases in volume. It is the possibility of such temperature expansion that must be provided for.

Conclusion about heating in the wall:

Pipes should not be rigidly fixed. Otherwise, temperature deformation will lead to fractures of the material and leaks. If the pipes are laid in a groove (for example, a wall made of aerated concrete), then they need to be covered with polyurethane foam on top. And only then apply a layer of plaster. Depending on the design of the house and climatic conditions, it is advisable to insulate heating pipes in the wall .

You can do it differently. “Put” plastic corrugation on the pipes, place them in the groove and plaster them.

It is necessary to draw up a detailed plan for such a laying

This is especially important if the work is performed by invited specialists. They will leave, and with them - the “knowledge” about the configuration of the route

What could this lead to? As a rule, in any home some new things appear that need to be fixed on the wall. For example, a painting. Or you might want to outweigh something. You'll have to drill. If the heating pipe is metal, you will feel it immediately. And the drill will pass through the plastic easily. And then what?

Each house has its own characteristics. But in any case, we must not forget about the maintainability of the route.

Options for closing heating pipes

You can use decorative pipe covers. This will help reduce the cost of heating system equipment. Sometimes this is a fairly economical option.

Functions of decorative overlays:

• Hiding batteries and pipes completely or partially;
• Protective function against hot radiators;
• Fitting the box into the design of the room;
• Simplifies maintenance as dust does not accumulate on the battery;
• Some pad options help distribute heat evenly.

But when choosing decoration, it is important to consider not only beauty, but also practicality. It is necessary that the material does not reduce heat transfer and does not emit toxic substances during heating

Plastic, for example, must withstand high temperatures for a long time. It is also important that the material does not change color or shape during use.

Decoration should not stand in the way of heat transfer from the radiator.

The decorative box must meet a number of parameters when used. The overlay should not take up much space; you should choose the most compact options. The fastening of the structure must be strong enough, but at the same time it is necessary to provide for the possibility of access to the batteries. It is also important that the box is not too heavy.

How to use boxes and niches to disguise pipes

The construction of a box can be considered one of the ways bathroom remodeling, quite simple and convenient. A metal profile of the required shape, or several wooden blocks of the required length and cross-section, is sheathed with sheets of plasterboard, which requires subsequent finishing. It is easier and faster to build a box using plastic panels.

Photo 8 - Pipe box in the bathroom

Niches for hiding pipes are built in a similar way, but they allow you to hide not only plumbing lines, but also a washing machine, washbasin, etc.

Boxes and niches have a serious drawback - they take up space, which is very important in a small room.

Various types of pipe camouflage

There are various ways to hide elements, allowing apartment residents to show creativity and imagination. The most popular ones include:

• creation of closed heating systems;
• masking heating elements with furniture;
• arrangement of boxes in which communications can be hidden;
• decorating pipes using overlays and other design elements.

To create closed systems, all pipes passing through the apartment are removed into channels specially made in the walls, after which the contours are sealed with plaster.

This method requires the ideal quality of communication elements: even minor defects over time can cause leaks and breakthroughs that are difficult to repair. Particularly dangerous in this regard are plastic pipes that are connected using fittings, but leaks are also possible in steel products if welding technology is not followed.

When camouflaging, communication networks are covered with household appliances and furniture, located behind a cabinet, under a sink or sink. Such a solution is easy to implement in the kitchen, but in living rooms, especially those designed in the spirit of minimalism, this is often difficult.

Decorative boxes are a reliable way to disguise communication elements. They allow you not only to disguise the pipes, but also add a “zest” to the interior design

The most popular methods of hiding pipes are boxes made of different materials, as well as the use of decorative elements, for example, rings, ropes or ropes, stained glass windows.

We will consider the nuances of decorating heating elements below.

Characteristics of plastic pipes

Polymer pipes are a modern material often used for laying household communications. In addition to completely plastic ones, a modification reinforced with aluminum or fiberglass is actively used, which is less sensitive to temperature changes and more durable. Unreinforced pipes are only suitable for cold water systems. For installation of plastic water supply or heating systems, samples with a diameter of 20-110 mm are used. Non-standard diameter is available upon special order.

Manufacturers note that one of the main characteristics of the material is the wall thickness of polypropylene pipes: the table, often attached to the product, clearly shows the requirements for the material for water and heating pipes with different loads and ambient temperatures.

Plastic pipes

The best ways to beautifully hide radiators

There are several ways to hide batteries; in this section we will look at the most popular and effective ones.

Hinged screen

It is by far the most practical and popular method; most often this design is made of metal and has its advantages:

• simple installation;
• heat exchange remains the same;
• can be made with rounded corners, which reduces the risk of injury.

Glass screens

A screen made of glass will be an interesting and stylish solution, especially for those who choose minimalism or a modern style in interior design. Photo printing or various patterns can be applied to the glass, but this method is not a budget option. Installation is carried out on a screw holder, but you will have to drill holes in the wall. However, the heating radiator will be stylishly protected. This option will fit into any interior.

Box screens

Box screens are an excellent option for decorating radiators.

• They will help to completely hide the battery.
• The box can become a piece of furniture.
• Erans are easy to install and easy to care for.
• Protect from burns or other injuries.

The photo shows an original green wooden box in the children's interior.

Curtains to the floor

Let’s not forget about the most popular way to hide batteries - simply hang them with opaque or translucent curtains. Using this method, over time you will even forget that there are pipes and a radiator behind the curtains. The main thing is to choose curtains that will look harmonious and not show everyone that there is something behind them.

Painting the walls in color

How to hide a heating radiator on the wall if other designs are “prohibited”. There is only one way to paint it the same color as the wall.

Wood frame

Wood will create coziness and warmth in the apartment, and the disguise of the battery will be elegant and beautiful. This option is for those who are furnishing their home in eco-style using natural materials. These ways to hide batteries can be used as a stand for home decor.

In the photo, ordinary wooden blocks stylishly hide the radiator in the kitchen.

Built in furniture

Another common way to cover a radiator is custom-made furniture or built-in furniture (shelves, cabinets, folding tables, seating).

Hide the radiator with furniture

Arrange furniture, such as an armchair or desk, so that it covers the radiator. A cast iron radiator is not attractive to many, but pieces of furniture can hide it.

Replace with designer model

For those who don’t want to invent anything, unique designer ways to hide batteries have been developed that already initially have a beautiful appearance and you simply don’t want to hide them.

Original ideas

There are many creative ideas that can turn batteries into a decorative element:

• Forged products

• Hide the radiator with fabric

• Painting and decoupage of batteries

In the photo, with the help of a beautiful painting, the battery has merged with the wall.

Installation of a water supply system made of polypropylene pipes in the wall

When purchasing fittings, tees and connecting parts, the diameter of the selected pipe products is taken into account. They, like the main elbow, are usually made of polypropylene. But they can only be used when creating branches, fixing measuring devices and for redirecting water flows.

The fact is that installing polypropylene pipes into a wall involves creating a soldered, permanent connection, which is performed using a welding tool. Around the pipeline, laid in the thickness of the wall, you need to lay out a shock-absorbing “cushion”, which will allow the pipe to change its parameters. Read also: “How to make holes for pipes in the wall - tools and rules for performing the work.”

The process of hiding polypropylene products in the wall is as follows:

1. Mark the pipeline laying, taking into account the location of the functional outlets.
2. Calculate the coefficient of possible deformation. When a long-distance system is installed, the pipe should be lengthened by 1 centimeter for each linear meter. The calculation is performed for a liquid having a temperature of 70 degrees. Usually they use the arrangement of a compensation unit - a small section of pipe is laid in the shape of the letter U, which helps to correct a significant amount of elongation and will become a preventive measure against an emergency.
3. The laying of a polypropylene pipeline is carried out taking into account all requirements. It is necessary to purchase pipe products with a wall thickness that will correspond to the operating conditions.
4. To compensate for linear expansion in the walls of bathrooms and toilets, you can use corrugated pipes. When laying channels from the U-profile, you need to use an additional heat insulator. A similar principle is used when laying polypropylene pipes in a groove. As a heat insulator and at the same time shock-absorbing material, you can use polyurethane foam, polyethylene foam or energy flex (read also: “”).
5. For fixation, clamps and supports are used.
6. After completing the finishing, you need to perform a test run of the system.
7. Then they begin to restore the wall, it is best to do this using a plasterboard partition.
8. It is necessary to preserve the pipeline installation diagram so that other repair work does not damage the water supply system.

When deciding whether it is possible to hide polypropylene pipes in the wall when the structure is already ready, experts advise not to take risks, but to build a special cabinet for access to the pipeline instead of a monolithic blank wall. The free space in it can be used to store things.

Preparation for installation

The primary task is to draw up an installation drawing of future highways. In fact, the pipeline plan must be carried out taking into account all connections, taps, technological cabinets, shut-off valves. Detailed planning helps to avoid redundant connections and waste of material, since it is determined in advance which parts and in what quantities are needed.

Note! It is better to save the drawn up plan. It may be useful for system maintenance and installation of new communications.

For example, for inserting an additional tap.

Walls for hidden installation of pipes will have to be grooved, that is, a channel will have to be cut in the concrete for laying a pipe line. It is advisable to pre-mark the working area in order to make an even and high-quality channel.

It is advisable to take into account that it is not recommended to groove walls in panel houses, since the thickness of the panels is usually small. The most suitable walls are made of thick brick or concrete. They can be tapped without fear.

To perform installation work, you need tools designed for polypropylene:

• cutting scissors;
• a shaver for removing reinforcement and a chamfer for leveling the cut surface;
• welding machine with temperatures up to 260 °C;
• wall chaser or grinder for cutting out a cavity in the wall;
• chisel and hammer or punch to remove material between the grooves.

Installation

When the tools are ready, there is a detailed plan for installing pipe lines and markings, you can start working:

1. Using a grinder or wall chaser, cut parallel to each other slots on the concrete surface of the wall; the distance between the slots should be slightly greater than the thickness of the polypropylene pipe in the thermal insulation. It is recommended to use a stone disc or a toothed disc coated with diamond.
2. Use a hammer drill or chisel to remove concrete between the slots.
3. To place technological cabinets, you will have to make a cavity in the wall and install a cabinet with slots for communications in it. This design will facilitate access to shut-off valves or sensors.
4. The pipes are welded in advance, after which they are laid in the wall and fixed in the channel with clamps or supports. It is advisable to do most of the welding outside the channel because it is easier than welding in a confined space. Before sealing the grooves, it is recommended to check the system for leaks by running water into it. If no leaks are observed, then you can proceed to the final finishing.
5. Before laying the pipes, it is advisable to wrap them in a layer of energyflex, or fill them with polyurethane foam after installation. This will provide space for the pipe to expand.

Note! Before grating begins, if there is any finishing on the wall, it must be removed. It will not be possible to make a channel in tile or wood without ruining them, but the presence of finishing can significantly complicate the work.

Of course, you can lay pipes on top of the walls, and make finishing on top of the main line, but then the free space in the room is reduced, and the cavity formed between the finishing and the wall will have to be filled with insulation. This approach is ineffective, since the finishing material must adhere tightly to the surface.

If you need to hide a ready-made pipeline structure, it is better not to make a blank monolithic wall, but to build a special plasterboard box to ensure free access to the pipes if necessary.

After a test check of the functionality of the pipeline, you can begin finishing the wall; it is better to use drywall for this.

Masking horizontally laid pipes

The easiest way to close horizontal communications is by constructing the same box from chipboard, plywood or plastic. To construct such a structure, markings are made on opposite sections of the wall.

When determining the length of the indentation, they are guided by the most protruding points along the entire length of the pipeline, including its farthest sections

A guide profile is attached along the marking line using self-tapping screws. Jumpers are inserted into it, maintaining an equidistant distance of 60 cm. Pre-cut blanks are attached to the assembled frame.

If desired, you can build a removable structure. To do this, according to the height and width of the pipes, boards are cut to create a vertical and horizontal plane. They are fastened together with a perpendicular “corner”. The assembled structure is simply placed above the pipe location.

Features of polymer pipes

Heating substances increases their volume, says a school physics course. This fully applies to plastics, since temperature also makes them plastic. If when laying a pipeline for cold environments the expansion coefficient can be practically ignored, then when installing a heating system this aspect must always be kept in mind.

It is this fact that raises doubts about whether it is possible to wall up polypropylene pipes into the wall, which will expand and lengthen when hot water is turned on. Will such a reaction damage the material in which the pipes are embedded and the decorative finish of the walls?

Experts warn: indeed, metal communications that do not expand significantly can simply be walled up in a layer of material, but for plastic pipes you will have to fully comply with the laying technology. Otherwise, the wall will crack, and the tiles laid on top will most likely fall off.

External laying of plastic pipes

Features of polymer products

As you know even from a school physics course, when substances are heated, they begin to increase in volume. This is directly related to plastic products, and the high temperature also makes them plastic.

When installing pipelines for cold water, you can not take into account the expansion coefficient (more details: “Preliminary calculation of the thermal expansion of polypropylene pipes”). At the same time, when arranging the heating structure, this nuance must be taken into account.

It is this circumstance that raises doubts among many home craftsmen as to whether it is possible to wall up polypropylene pipes into the wall, which will begin to lengthen and expand when the hot pipeline is started.

This raises a natural question as to whether the finishing materials into which the elements of the engineering system are embedded will be damaged.

Experts assure that metal pipe products that expand slightly can simply be embedded in a layer of material, but in order to hide polypropylene pipes in the wall, you have to fully adhere to the installation technology (more details: “”). Otherwise, the finishing of the room will become covered with cracks, and the tile covering will most likely fall off.

Decoration methods

Among the simplest finishing methods is painting. The pipes can be painted in some bright color or, conversely, given the color of the wall to make them invisible.

It is a little more difficult to build a decorative structure in the form of a pipe box. You can choose different materials for this purpose. The most popular is plasterboard, but PVC boards and laminate are also in demand. parquet board. Using these materials you can create structures of different shapes and sizes. The box can also be further decorated with painting, paper crafts, artificial flowers, etc. There are also attempts to hide pipes behind furniture, but this idea is one of the most difficult. After all, pipes are often located where placing furniture is impossible or not recommended for aesthetic or other reasons.

Transforming a pipe into a tree

This simple idea only requires the ability to work with paints, so almost any owner can handle it. The vertical heating pipe is painted to match the color of the trunk. For example, birch trees are the best option if the pipe is narrow, and the departure from the traditional white color will not be radical. When the “trunk” is ready, you can draw branches and leaves on the adjacent walls; or you can attach a composition of artificial leaves. This “tree” is perfect for a children’s room, where it can become part of the games. The color of the leaves can change depending on the time of year; You can do this together with your child, and then this process will become part of education - with its help you can instill observation and love for nature. Another type of composition based on “wood” can be proposed for the living room or bedroom. Here the colors and shapes chosen are more “serious”, and the subjects are symbolic.

It should be remembered that paints for pipes must be heat-resistant and non-toxic, then they will last a long time and will not become a source of danger during the heating season. These are usually acrylic, alkyd enamels, water-dispersion paints.

Decorative trim made of rope

Another simple option is to wrap the pipes with hemp or jute rope. As an addition, you can attach the same branches with leaves. With such “clothing” the pipes will give off slightly less heat, so this option is used if heat transfer is not so important.

You can also use split bamboo stems. The halves glued around the pipe will create an original “cover” for the pipe. You can add artificial flowers to it. In many cases, guests will not even notice that ordinary heating pipes are hidden behind this composition. Where the pipe comes out of the floor or rests on the ceiling, you can attach decorative trims. Then the disguise will become as complete as possible. Thread curtains will also hide the heating system from the eyes of owners and guests. Curtains will also give the entire room an original and amazing look.

It may seem incredible, but a heating pipe can be decorated with stained glass. For this, glass or transparent plastic with an applied composition is used. It is curious that such a decorative element is often combined with characteristic lighting. Light pours into the room due to the translucent composition, which can also be used as a night light. In this case, the lighting will be dim and soft, which will create a special atmosphere in the bedroom.

False wall

This is a good way to hide the heating element, especially if it takes up a lot of space. First you need to make a frame and then upholster it with suitable material. Before “sharpening” a pipe or battery into a false wall, you need to make sure that everything is in order with it. The main disadvantage of a false wall is that it reduces the available space in the room.

Instead of a false wall, you can purchase a ready-made box. Commercially available models have a perforated surface to allow heat to penetrate into the home. Batteries are usually masked using such means.

Video: false wall around heating

Option for hiding heating pipes in the wall

Pipes located along the wall can ruin not only the appearance of the wall, but also the interior design of the entire room. But first of all, we would like to inform you that it is strictly prohibited to completely close the heating pipes in the apartment by hiding them in the wall or under the floor.

• Firstly, there is a law prohibiting, without the consent of the housing office, “reconstruction of residential premises that involves the installation, replacement or transfer of utility networks...”, and obtaining permission there is not so easy.
• Secondly, this case can be risky in multi-apartment residential buildings, since if a completely walled riser breaks, you can pretty much flood your neighbors, because not all plumbers are experienced, and some can cheat, as a result of which all the trouble will eventually fall on you .
• And thirdly, if the central heating system is pretty worn out and leaves much to be desired, then even more so, the method of hiding heating pipes in the wall of a room can lead to a decrease in heat transfer in the apartment and the formation of dampness and mold in the apartment.

The option of disguising heating pipes in the wall or under the floor is perfect in a private home, since in such houses an individual boiler is usually installed, where the temperature regime is regulated by the owners and in the event of an emergency, you can easily stop the boiler system and drain the water.

How to close heating pipes in an apartment photo on the wall

First of all, if the heating system in a private house has already been installed, you should carefully inspect the pipes and the system as a whole. It is strictly not recommended to hide metal pipes, especially old ones; it would be better if you replace them with plastic ones. For those who are just building a house and installing a wiring system in a room from scratch, it is much easier for them.

Before starting work, you should draw up a diagram of the future location of the pipe system. Next, in the wall or on the floor, recesses are made with strobes of the appropriate size, using a grinder with a diamond wheel to cut the markings and to deepen the recess itself; if you do not have the proper power tools at hand, you can use the old-fashioned method, that is, a chisel and a hammer.

After the recess in the wall or floor is prepared, all that remains is to drown the pipes

This process is quite simple, but remember, do it wisely, that is, pay special attention to the connection points of fittings, elbows and tees. After laying and installing the pipes, you need to check the reliability of their fastening and the absence of leaks, in order to avoid further troubles

To check the heating system of pipes in a room, follow these instructions, connect the heating system to the pump, then fill it with water and create a pressure that exceeds the working pressure, and then visually inspect all pipe connections for leaks.

In order to reduce heat loss in the system, it is recommended to insulate the pipes with polystyrene foam insulation. To do this, you need to make a side slit in the covers and put it on the pipes; the seams can be taped with special tape. After all the work done, the wall should be given a uniform appearance by covering the openings with mortar and removing all accumulated construction debris.

How to disguise a heating pipe in a room under a screed photo

At the end of the process of completing all the work, a pipe route diagram is drawn up, so that during further repair and construction work, the integrity of the hidden structure will not be accidentally damaged.

Installation method

Marking is a preliminary stage of laying polypropylene pipes in the wall. For this you can use a simple pencil. Next you need to do the following:

1. Using a hammer drill (grinder), cut two parallel grooves (slots in the wall). When working with a grinder, it is recommended to use a simple stone disc or a disc with diamond-cut teeth.
2. Use a chisel or hammer to remove the material between both markings, thus joining them into one.
3. Insert the plumbing structure into the finished grooves, then cover the pipes with cement mortar.
4. The final stage of laying polypropylene pipes in the wall involves testing the operation of the newly created system. After filling it with water, check for leaks, sagging or other problems with the water supply system.

If no leaks are found, proceed with finishing. You can use plaster for this. However, the choice of facing material depends on the taste and level of well-being of the homeowner.

Having laid the pipes in the grooves, you need to secure them and carry out tests

You should know that trenching walls in panel houses is strictly prohibited. This is due to the relatively small thickness of the panels, and chipping will lead to a decrease in their strength. It is permissible to carry out such work only in houses with thick brick walls. Therefore, in modern multi-storey buildings, the laying of polypropylene pipes is carried out by fastening to the wall. Let's look briefly at this issue.

How to choose

Finding a solution to the problem of decorating heating pipes comes down to the fact that it is best to build a special box for them. Its appearance should best suit the interior design, and it should provide easy access to the pipes at any time. To choose the right materials for the box, you need to know what you can choose from.

Today the most popular options are:

• waterproof plywood;
• plasterboard structures;
• plastic products.

Using plywood is the most expensive, because it needs to be impregnated with a special waterproof substance. The use of chipboard was a breakthrough compared to plywood and showed better results. This material was cheaper, and with its help it was possible to do everything that was needed faster and easier.

With the development of the industry, plasterboard became popular and any structures erected with its help turned out to be beautiful and durable. One of the disadvantages of chipboard and gypsum plasterboard is the fear of moisture, because the first material swells, and the second crumbles from contact with water, and in the case of heating, sooner or later, this can happen.

To still use these options, they need to be protected with a waterproofing layer, which requires additional time and money for repairs.

The use of plastic would be optimal due to its characteristics and price. Plastic panels are resistant to moisture, they are not afraid of temperature fluctuations, although plaque may form on them if there is constant contact with water. The installation process of such products is very simple and convenient. In addition, there is no need to use additional protective agents for plastic, which helps save both money and time. With all the advantages, there is also a disadvantage to such panels - they are quite fragile.

If you plan to build a plastic structure in a bathroom or other similar room, it is best to use a metal frame as the base. You can replace it with wood, but then you will have to use additional treatments to protect it from moisture, because wooden structures will not be able to withstand water for long.

To build a box for heating pipes, the work can be divided into three stages:

• Preparation for the process and selection of materials.
• The main part of the work is where the construction of the structure takes place.
• Decorative work on the finished product.

The choice of material to use for pipes depends on various factors that must be taken into account, such as the size of the room, the size of the pipes and the functional load of the area being decorated. Having decided on all the parameters, you can begin building the product.

Installation under tiling

Piping in the bathroom must be done before plastering. To ensure that the even layer of plaster does not have to be made too thick, communications should be “recessed” into the wall, for which channels are made in them for pipes.

This is done simply - with light movements of the grinder, cuts are made according to the originally drawn diagram of parallel laying of the water supply. The depth and width are taken into account based on the corresponding parameters of the pipes.

After the “cuts” are made, we proceed to cleaning the resulting channels. This can be done using a chisel or hammer drill. The choice of tools depends on how much you love and appreciate your neighbors, who will undoubtedly appreciate the melodic quality of construction equipment.

It is worth noting that modern plastic communications will not require any additional thermal insulation and after plastering the wall, it will be possible to begin installing ceramic beauties.

When carrying out renovation work in the bathroom, you will most likely want to know how you can hide the water supply and sewerage pipes. This will help improve the aesthetics of the room as a whole. The difficulty of such an event lies not simply in completely hiding all communications from prying attention. This must be done in such a way as to leave them available for ongoing inspections or repairs in the event of an accident.

To make a decision how to hide sewer pipes in the bathroom, you should carefully analyze and study the communications layout plan. It is very important to draw up an accurate project, since in an apartment building all systems are interconnected. Because of this, if communications are connected incorrectly, problems may arise for both you and your neighbors.

A detailed diagram will make further actions easier

To properly hide the pipes in the bathroom, you need to decide in advance where the connection points for plumbing fixtures, possible branches and turns of the pipeline will be located, and mark the wiring diagram directly on the wall.

You can also draw a schematic plan for the location of communications on paper. It is important to consider the scale, but it is better to clearly indicate the dimensions.

When planning to hide pipes in the bathroom, you need to lay them along the shortest route and with a minimum number of bends and turns. It is also important to consider the following points:

• section pipes;
• waterproofing layer;
• admissibility punching grooves in the walls;
• material partition and its thickness;
• location fittings;
• thickness screed layer.

Methods of masking communications

Pipes located horizontally are hidden under the screed, and risers (pipes running vertically) are hidden under the plaster. This method involves carrying out related construction work, such as installing grooves, applying a layer of plaster, and laying tiles.

Laying communications to hide them in the floor and wall

Communications can also be hidden by constructing a system of moisture-resistant plasterboard or OSB. This is done in this way - a special metal profile is attached to the wall, to which sheet material is screwed using self-tapping screws.

You should also not neglect insulation - before fixing sheets of plasterboard or plywood, it is recommended to lay a layer of foam plastic or mineral wool on the wall. After the structure is assembled, it can be covered with tiles.

You can also assemble furniture structures in the form of shelves or cabinets that will help with masking pipes. In addition, there will still be enough space inside to store household items, such as household chemicals.

In the end, the pipes can simply be painted over, decorated with artificial vines, covered with multi-colored mosaics or stucco elements made of foam plastic - in general, you can do whatever your imagination dictates.

It is important to maintain access to the main communication nodes

You need to remember to exclude the method of simply tightly hiding the places of threaded connections, fittings, valves and meters. They should be easy to access.

Basic rules for concealing communications

To give the bathroom aesthetics and increased comfort, as well as to free up as much space as possible, it is advisable to mask all the pipes if possible. There are a number of rules, the implementation of which will enable pipelines to function for a long time and reliably:

• the number of connections should be minimal;
• accessories, such as fittings, angles should be installed from the same material, as the pipes;
• valves and inspection windows must be equipped special hatches for access to the main pipeline devices;
• It is advisable to wrap the pipes layer of waterproofing to avoid sweating, that is, the formation of condensation.

Detailed description of camouflage options

There are several ways to hide bathroom pipes under tiles. Photos, examples of which you can see in the gallery of our website, clearly demonstrate this.

Polypropylene pipes will be the optimal solution for laying hidden communications

To hide pipes under screed or plaster, professionals recommend using exclusively polypropylene or copper pipes that are not equipped with threaded connections, but are firmly soldered or welded. To choose the option that suits you best, you need to familiarize yourself in detail with the features of each of them.

Hiding communications in a screed

This method of hiding horizontal pipes is the most aesthetically pleasing because they will be hidden so that it will be almost impossible to find them.

Before laying, the pipes are placed in a special corrugated hose. They need to be laid along the shortest route, after which a layer of cement or concrete screed is poured. The layer thickness should be 2–3 cm above the pipes. After the screed has completely hardened, a finishing coating such as tiles, linoleum or laminated panels is laid on the floor.

Option to hide pipes in a screed

It will be useful to remember that the bathtub cannot be used until the solution has completely hardened, since hot water passing through the pipes can lead to cracking of concrete that has not completely hardened.

Construction of tunnels

To make niches in which communications are laid - the so-called grooves - it is reasonable to use an angle grinder or grinder with a pobedite or diamond disk.

Next, you need to make two parallel cuts at a distance corresponding to the cross-section of the pipe, then use a chisel and hammer to remove all excess concrete between the cut grooves. The manual process will be long and tedious, so it is wiser to use a hammer drill with a chisel attachment.

To hide pipes in the wall, grooves are punched in it with a hammer drill

Hoses with pipes are placed in the finished grooves, after which they are covered with plaster. The finishing floor covering can be laid on top.

Inspection hatches must be installed in places of threaded connections, valves or fittings to provide access to them if the need arises.

The advantages of this method of masking pipelines include their complete concealment under the floor.However, this method has its drawbacks. Access to the pipes in the event of an accident will be limited by the size of the inspection hatch. If a breakthrough occurs, it will be very difficult to locate it. To do this, you will need to completely tear off the decorative coating.

Therefore, pipes laid in walls should only be of high quality. In this case, many problems can be avoided.

Plasterboard structures

Let's look at how to cover pipes in a bathroom with plasterboard. This is one of the most common ways to disguise a sewer riser. Boxes of several levels will be an excellent solution to hide communications, visually enlarge the space, while simultaneously gaining unrestricted access to the pipeline. The structure consists of galvanized profiles fixed to all planes of the room, to which sheets of plasterboard are screwed with special screws. It is this material that acts as the basis for laying tiles.

Plasterboard construction is a popular way to hide pipes

It is important to take into account the need to equip these systems with inspection holes for monitoring at connections, valves, meters, and filters.

Another method of masking pipes using drywall is the construction of an additional partition, the so-called false wall. To do this, you can use another technology. Below is an example of how to hide pipes in a bathroom with your own hands using plastic panels. As a rule, this method is used in large bathrooms.

Plasterboard systems will be an excellent basis for covering them with ceramics

Masking partitions can be straight or oblique. Oblique false walls are located at an angle relative to the load-bearing walls. They also need to be equipped with inspection hatches for access to communications.

Rolled metal shutters

Installing a roller shutter will completely solve the issue of gaining access to the pipeline. You can also install shelves behind it for storing household small items. In particular, it would be ideal to store household chemicals there. Since roller shutters can be locked with a key, you don’t have to worry about the safety of your kids. Installation of this device will not pose any problems, and the color can be easily matched to the tone of the tile.

Masking pipes behind roller shutters

However, such shutters may not stylistically match the interior design of the bathroom. In addition, they are made from rather unreliable materials, and shutters can easily be crushed or broken if handled carelessly.

Masking pipes with furniture

One of the most convenient and functional methods of hiding pipes in the bathroom will be furniture systems. Well-chosen furniture will add elements of luxury to your interior design. As a rule, to hide communications in the bathroom, cabinet systems with shelves, equipped with sliding or hinged doors, are often used. This choice directly depends on the total area of ​​the bathroom and the location of plumbing fixtures in it.

Typically, laminated chipboard is used to make furniture for bathrooms, and it must be moisture resistant. Upon completion of installation, it is necessary to treat all gaps and joints with silicone sealant to protect the furniture from contact with water. Although chipboard is considered moisture resistant, it can become unusable due to constant exposure to water.

Masking plumbing, sewerage and heating in a room using furniture has a significant disadvantage, such as low resistance to the influence of water. Of course, manufacturers make all countertops and laminated slabs for bathrooms moisture-resistant, although, as a rule, this does not save the furniture - it quickly loses its attractive appearance.

Cabinet furniture will become another alternative to masking communications

This can be partially avoided if you regularly monitor the degree of wetting of the furniture in the bathroom. To do this, you need to wipe it dry after each visit to the bathroom. In addition, it is necessary to regularly check the areas where silicone sealant is applied for deformation.

An important advantage of this method of hiding conductive communications in a room is its high aesthetics, as well as functionality, since cabinets can be used as an additional storage system.

The furniture will not only hide communications, but also become a spacious storage system

Renovating a toilet and bathroom means not only installing plumbing fixtures, but also practical arrangement of the space. Therefore, the second important question is how to hide all the pipes in the bathroom under the tiles.

The bathroom and toilet are a complex system of plumbing communications, but at the same time, you want to make the bathroom an area for relaxation and rest: a cozy place with beautiful walls and a comfortable atmosphere. To do this, you will have to hide what looks foreign and alien to relaxation.

If you hide the pipes in the bathroom, the room will look more comfortable and beautiful

Installation of a box with a metal frame for masking pipes

Such a box may become impractical, as it is difficult to dismantle. He needs a plumbing practical hatch or even hatches. If the design is collapsible or mobile, it will only benefit. Therefore, it is necessary to create a box that would be as attractive, convenient and utilitarian as possible.

Material selection

The box in the bathroom requires moisture-resistant materials that are not subject to corrosion, mold and rot. Their small thickness and weight are desirable so that building structures do not turn out to be bulky and do not take up space.
Galvanized metal profiles are more advantageous for the frame. A wooden frame in conditions of constant humidity is a risky material, but if you choose rot-resistant wood species and treat them with an antiseptic, this will greatly increase its durability.

Example of a plasterboard box

For covering - sheet material - plasterboard, moisture-resistant and carefully processed plywood, plastic and even metal coated with polyester, for example. Drywall and plywood will require additional coating, ceramic tiles, for example, while sheets of plastic or metal have a finished look and do not need further finishing.

Installation of a box for water pipes

Important! Before installing the pipe box, it is necessary to check the functionality of the entire water supply route and connections. If the water supply or sewerage system has been installed recently, then be sure to test the reliability and strength of all components and blocks for at least a few days.

Step 1. Make the necessary measurements, calculating: the thickness of the material, joints on pipes, coarse water filters, meters, thinking through the location and volume of a convenient sanitary hatch: its height, depth and width, the quality of the door and its functionality.

Step 2. Make markings on the floor, ceiling and walls. The frame is marked from the floor, then with the help of a plumb line it is transferred to the ceiling and only then to the walls.

Important! The minimum distance from the pipes to the surface of the box is 3 cm

Step 3. Secure the profile to the walls using dowels and European screws.

Installation of a metal profile for the box

Step 4. Using metal screws, screw the rack elements to the profile.

Step 5. Mount the guides on the ceiling and floor. Horizontal and vertical guides are attached using a cutter.

Step 6. Install jumpers on the frame at a distance of 50-70 cm.

Step 7. Cover the resulting box with plasterboard, plywood or plastic, not forgetting the hole for the plumbing hatch.

Important! When sheathing, it is better to use solid sheets, trying not to make many joints.
Important! When installing, use self-tapping screws at a distance of no more than 2.5-3 cm to a depth of no more than 1 mm.
Important! The frame of the future hatch must be installed before starting work with cladding with sheet material.

Step 8 a. If the work was carried out using plastic, use liquid nails or other glue to hide the seams and corners with decorative corners, starting and finishing strips.

Frame of a plasterboard box, prepared for decoration with tiles or painting

Step 8 b. Prepare the surface of plasterboard or plywood for further work, painting or laying tiles: seal the seams and fastenings with putty, secure the external and internal corners with a metal profile, and prime.

Tip: The future plumbing hatch can be designed to match the tiles: make it from a metal profile and plasterboard, like the entire box, or purchase it ready-made.

Plumbing hatch: functions and features:
It is worth repeating that the question of how to hide pipes is not limited to this. Another question is how to make all plumbing communications accessible for use, including piping in the bathroom, a coarse water filter, and more.
The hatch should definitely be a convenient design with a practical door. The easiest way is to buy it ready-made, since the construction market provides such an opportunity.