How to remove a door or window from its hinges. How to remove a door from its hinges? How to remove old hinges from a door

The need to remove the door from its hinges is resorted to in situations where it is necessary to bring in large furniture or carry out repair work. Less commonly, the procedure is used to open a house or apartment when the door mechanism breaks down. The removal method depends on the design features of the canvas and the loops themselves. During the dismantling process, certain rules must be followed. Let's look at how to remove a door from its hinges yourself.

Screw-in hinges are pins that are embedded deep into the box. The surface can be smooth or equipped with a threaded connection. The studs are connected by a hinge in the middle part of the element. Hinges vary in the number of pins. There are 1-4 of them depending on the modification of the loop. They are suitable only for light models, otherwise the weight may cause the canvas to break off the pins.

Card hinges are considered a classic option for installation. They are presented in overhead and mortise models. The first type of hinges does not require preliminary preparation of the canvas and the opening. The second type of fasteners is either removable or non-removable. Such hinges must be slightly deepened into the frame and door leaf before screwing.

Hidden hinges are completely hidden in the doorway, allowing the “gate” to be opened 180°. They are considered the most reliable. The model is selected based on the weight of the canvas. This type of fittings is widely used in luxury products. Unlike other types of fastenings, they do not allow the panels to sag, but they cause difficulties when dismantling is necessary - many do not know how to remove the door when closed.

How to remove doors with card hinges

The card loops are connected by a hinge that rotates as the web moves. The plates themselves are attached to the door and frame with special screws. The easiest way to dismantle models is with hinges consisting of two halves. It is enough to pry and lift at the bottom of the canvas so that the upper loop comes out of the hinge. It is necessary to turn it slightly from side to side so that the hinge comes off faster. If the canvas has glass stakes, it is recommended to carry out dismantling with an assistant so as not to accidentally break the glass.

Important! Removal must be carried out with the “gate” open, otherwise it will not be possible to lift the canvas. It will rest against the top of the door frame and may deform it. Removing dents will be quite difficult.

Non-separable loops cannot be removed this way. To dismantle the door, you will need to unscrew all the screws on the frame or panel. Non-separable card hinges of the European type are equipped with additional overlays and other decorative elements. First, you need to loosen the fastening bolt on the door and dismantle the decor and protective caps, then proceed directly to removing the panel. To remove the door, you need to unscrew the bar on each hinge on one side.

Dismantling hidden and screw-in hinges

Door panels are dismantled using a special hand tool. The type of screwdriver or hexagon is selected in accordance with the type of fastening. In an open door, first unscrew half of the fittings, then remove the panel. In complex structures it is necessary to knock out the axis of the mechanism. The manipulation is carried out carefully so as not to damage the canvas and the fastening itself. In closed structures, it is quite difficult to open the door yourself. Most often they resort to the services of a master. In balcony versions with partially masked hinges, remove the protective caps and dismantle the canvas by knocking out the axis. If you can’t do it yourself, you can use the services of specialized companies to find out how doors are dismantled http://pro-expresspereezd.ru/services/demontazhnye-raboty/demontazh-dverej/.

Let's take a closer look at how to remove the door from the door hinges. Screw-in hinges must first be disassembled. To do this, remove the small pin located in the hinge part. It is removed when the opening is closed. Using a screwdriver or other convenient tool, push the pin up, picking it up with your hand or pliers. Next, lift the blade and remove it by turning it lightly until the mechanism disengages.

How to dismantle a metal-plastic door

To gain access to the hinges, you need to remove the plugs and bend the decorative trims. They are removed with the door slightly open, and the lock handle should not be kept pressed. When you press on the top element of the hinge, the pin should move down. To make the axis of the upper loop jump off, pry it up with pliers. To remove the door, you need to tilt the door towards you.

It should be borne in mind that it is quite heavy, so the work must be done carefully, without haste. The canvas is lifted until it comes off the hinges. If it is necessary to repair the door leaf or fastening mechanisms, removing the door leaf is not always appropriate. The design allows for repair work to be carried out in assembled form.

How to dismantle a metal door

When removing a metal door from its hinges, you will need a hard object to back it up. Lifting of the canvases is carried out in a slightly open position at a position of about 40° with a crowbar, turning slightly until the hinges are separated. Remove all decorative elements and plugs from the internal removable hinges, then remove the canvas in the standard manner.

Features of door dismantling

This procedure must be performed carefully so that the frame, lock, hinges and the door itself remain undamaged. Particular attention must be paid to the places where the screws are screwed in. Damage to the attachment points will prevent the hinge from being reinstalled. It will become loose and the installation will become unreliable.

If the old hinges have become strongly stuck to each other during operation, a special anti-rust spray will help remove the effects of corrosion. The aerosol is evenly distributed over the entire surface of the loop. The solution must be allowed to stand for some time, after which the loops should be carefully cleaned.

Removed fittings must be checked for defects before installation. The mechanisms are thoroughly lubricated. Broken and deformed hinges are discarded. New fittings are purchased with the same fasteners as the faulty element. Distortions are adjusted by tightening the fasteners. In order for the hinges and lock to last for a long time, they must be periodically applied with a special lubricant.

There can be a great many situations when it is necessary to remove the door leaf from its hinges. This may include replacing the door structure or hinges with new ones, difficulties arising when bringing in or removing furniture, and repair work or other household activities.

The process of removing doors from hinges

Knowledge of the design of door hinges, as well as simple techniques that allow you to perform this operation, will allow you to economically manage not only your time, but also your money. This article will tell you how to quickly and efficiently perform these steps without resorting to the help of specialists.

The process of removing doors from their hinges directly depends on the design of the hinges or canopies that were used during installation.

Door hinge design option

Modern models of hinges are divided into the following types:

Read also

How to get a broken key out of a lock

Each door type, determined by its purpose and material of manufacture, requires the installation of hinges of a certain design, so the removal and installation of the door leaf also depends on the functionality of the door itself.

How to remove an interior door from its hinges

The fastening of modern interior doors can be different.


Let's look at the most common types of fastening and the procedure for dismantling.

To simplify the process of dismantling interior Euro doors, it is advisable to install a stop along the lower edge of the door.

Design diagram and size of hidden hinges for doors

If a pry bar is used to lift the door leaf, it should be wrapped in soft cloth so as not to damage the coated wooden door.

How to remove a plastic door from its hinges

In the residential premises of a house or apartment, the installation of a plastic door is most often found as a balcony door and canopies designed specifically for this design are used.

Scheme for removing a plastic door from its hinges

To remove a plastic balcony door from its hinges you must:

In administrative and commercial premises, metal-plastic Euro doors are often used as entrance doors. Their design is heavier and is equipped with anti-vandal reinforced hinge mechanisms in the amount of 3 pieces, the design of which, as a rule, coincides with the balcony ones.

In order to remove the plastic entrance door without damaging the plastic, you need to involve an assistant in the work. Watch the video on how to quickly remove a plastic door from its hinges.

How to remove an aluminum door from its hinges

Eurodoors made of aluminum, which have recently been used not only in administrative but also in residential premises, have a specific fastening with an adjustment mechanism.
The fastening loop itself can be of two types:

To remove the aluminum Euro door yourself, you must have additional hex keys and sprockets.

Names of door hinge design elements

However, it is worth noting that canopies equipped with an adjustment mechanism have internal parts that provide the ability to change the position of the door leaf, so disassembling the hinges must be done extremely carefully or use the services of specialists.

There are two methods for removing old doors: neat and damaged. We recommend that you always use the first option, since the sashes are often replaced with new ones due to a change in the style of the room. Old doors can be taken to the country or sold at a minimal price. Either of these methods takes about the same amount of time. We'll tell you in more detail how to remove an old interior door from its hinges.

What tools will you need?

Before carrying out work, it is necessary to prepare tools. To completely dismantle doors with frames, you will need:

• hammer;
• screwdriver;
• axe;
• a crowbar with a nail puller at one end;
• screwdriver;
• hacksaw.

If you are not planning a renovation, then you need to act in such a way as not to damage the finishing of the room. In this case, choose small, lightweight tools. If you are removing the door to lubricate the lock or hinges, leave the frame in place. In this case, you will need a minimum set of tools.

Features of sashes removal

To dismantle the door, you will need an assistant with whom you will lift the panel. It must be removed only in the open position of the sash, so that when lifting it does not rest against the frame. To make the work easier, you may need wooden blocks that you will place under the canvas.

Depending on what type of hinges was used, the process of removing the door leaf will have features:

1. Most often, card options are found on doors; they are often called “butterflies”. They come in two types: removable or monolithic. In the latter case, the door can open 180 degrees, that is, in both directions. At the same time, removing the canvas from such hinges is not difficult; you just need to invite an assistant to do this work and lift the sash.
2. It is more difficult to work with the new type of fittings, as it has decorative overlays and additional adjusting fasteners. Before removing the sash, it must be loosened.
3. Mortise hinges can be bolted, in which case they should be unscrewed. Sometimes they, just like card modifications, pile on top of each other. In the latter case, removing the door will not be difficult.
4. Screw-in hinges are complex options for fastening the door leaf. Inspect the mechanism, and only then decide how to remove the sash. Most often, as in other cases, you just need to lift it.
5. In recent years, universal Euro-versions of door leaves have become widespread. They, like the new-style fittings, have an adjusting screw that needs to be loosened.
6. Invisible options are the most difficult; to remove the sash you will need to remove all the fasteners holding it in the frame.

After you have removed the door, you need to carefully dismantle the frame, if necessary. The platbands are removed using a hammer and an axe, using the blade of the latter to pick up the board. Find the places where the box is attached; most often the elements are located under the decorative overlays in the area of ​​the lock or hinges. Unscrew the fasteners with a screwdriver or a simple screwdriver.

Sometimes a timber box is mounted on polyurethane foam. In this case, use a sharp knife to cut off the foam from the boards and remove the entire box. If you want to reuse the box, carefully move it horizontally, lay it on the floor and disassemble it. If you are prepared for losses, you can break the box right on the spot and pull it out in pieces.

How to remove the handle

If you removed the door to facilitate renovation work in the room and do not intend to replace it, perform preventative maintenance on the lock and moving mechanisms. The hinges can be lubricated with any compound, but reassembling the lock is more difficult. About 15 years ago, convenient but low-quality locks for interior doors appeared. They open easily if they are in good condition. If the lock breaks and jams, all that remains is to break it. In addition, many apartment owners are not satisfied that these locking mechanisms have a latch. It is best to change locks that cause you unnecessary trouble after dismantling the door leaf.

Removing the handle with the lock for repair or replacement is simple:

1. Unscrew the screws on both sides of the lever.
2. Unscrew the lock lever itself using a wrench. Pull it in together with the turning mechanism.
3. Using the flat side of a screwdriver, remove the decorative trim from the outside of the door (where there is no key).
4. Press the stopper and at the same time pull the handle.
5. Complete disassembly by removing all parts of the internal mechanism.

Installing a new lock with handle is carried out in the reverse order. If you are not sure that you can handle repairing a lock or removing a door, then it is best to invite a specialist to do this work. He will service the sash, remove it from the frame and, if necessary, dismantle the trims and jambs.

Remember that whenever we remove a door leaf, we need to check the functionality of the lock and hinges. Do not reinstall damaged parts, otherwise the door may begin to jam after reassembly.

There are often situations in life when minor repairs to a window or door are required, which you can do on your own. In most cases, to make it, it is necessary to remove the door leaf or window opening from the hinges on which they are held. How to remove a door from its hinges without damaging them? How to attach everything in its place? Let's look at these questions together.

Preparing to remove the door leaf

Before you begin removing a door or window from its mounting hinges, they are visually inspected. Inspection is necessary to determine the type of hinges used and the selection of tools.

There are two main types of door or window hinges:

• detachable, which are two blocks inserted into one another;
• one-piece or universal. Consist of one element equipped with hinges.

At the next stage, you need to prepare the necessary tools:

• a screwdriver suitable in size to the diameter of the fasteners. You can use a screwdriver;
• persistent tool: axe, crowbar, long stick, and so on. Anything that can help make a lever that makes the removal process easier.

If it is necessary to remove a product made of plastic, for example, a balcony door, then the stop tool should not be sharp, as this may damage the panel.

The process of removing doors and windows from their hinges

After the inspection and preparation of the tools, you can begin to remove the door leaf or window sash from the hinges.

Removing and reinstalling a door using split-type hinges

If split-type hinges are used to secure the door, then the removal process comes down to the following steps:

1. all decorative caps and linings are removed from the hinge, giving the mechanism an aesthetic appearance;
2. all adjusting bolts are loosened to a minimum (if any are provided for in the hinge design);

1. the pin connecting the two parts of the loop is removed. If the pin fits tightly, you can use a hammer, but you should not hit the device too hard, as you can ruin the entire loop;

1. with the help of a persistent device, the door leaf rises up a few centimeters. In this case, one part of the door hinge comes out of another part;

1. the door is moved to the side and completely removed.

When carrying out the fourth and fifth points of work, the utmost attention and help of another person is required. The door leaf is quite heavy. To prevent it from falling, you must constantly hold it.

The door, removed from its hinges, is subject to the necessary repairs, after which it is installed in its original place.

To install, you need to do all the work in reverse order according to the list:

1. the door is pre-hung on the hinges, they are connected to each other. Here you will need the help of another person or a persistent mechanism that maintains the canvas in a state of balance;
2. the fastening pin is inserted;
3. the necessary adjustments are made;
4. decorative elements are installed in their places.

How to remove a plastic door from split-type hinges? According to the same scheme. The main thing is to pay attention to the use of a thrust device.

Plastic is a very soft material. It is advisable to use a non-sharp device for emphasis. You can place a rubber gasket between the stop and the door leaf.

What to do if the hinges are rusty and do not come apart

With prolonged use of the hinges, a coating in the form of rust may form on the hinges, which interferes with the disassembly of the mechanism. If plaque occurs, do not apply great force to the loop or hit it with a hammer. This can cause harm and completely disable the mechanism. To remove plaque you need:

1. purchase a special product in the store, for example, WD-40 aerosol;
2. strictly following the instructions attached to the substance, apply a layer of spray to the rusty area;
3. wait a while (on average it takes from 6 to 12 hours).
4. remove the product with a dry and clean cloth.

After this procedure, the rust dissolves and the loop can be freely disassembled.

If necessary, the entire procedure can be repeated several more times until the harmful plaque is completely removed.

To prevent the hinges from rusting, they require constant care, which consists of.

Removing and installing a door leaf from one-piece hinges

One-piece type hinges differ from others in that they cannot be disassembled into their component elements. To remove a door from one-piece hinges, you need to:

1. first remove all decorative elements;
2. Using a screwdriver, unscrew the fastening screws on one side (either from the door or from the jamb).

How to put a door on universal type hinges? You just need to put the door back and secure the fasteners.

When using one-piece type hinges, the procedure for removing and reinstalling doors made of wood and plastic is no different.

How to remove a window sash from its hinges and reinstall it

A plastic window has a slightly different hinge design than doors. As a rule, when manufacturing a window, only detachable hinges are used, installed at the top and bottom of the sash.

So, let's look at how to remove a plastic window from its hinges and what you will need for this. First of all, you need to prepare the following tools:

• a screwdriver of the appropriate size;
• a small hammer, preferably with a rubber gasket;
• pliers.

The PVC window is made of soft material, so all work must be carried out extremely carefully. Removing the window occurs in several stages:

1. the window sash opens slightly in a rotating direction for direct access to the installed hinges;
2. all decorative plugs installed during window installation are removed;

1. Removal work begins from the upper loop, from which it is necessary to remove the fastening element - the spindle. To do this, several gentle taps are made on the top of the loop. The spindle extends down the hinge, where it can be grabbed with pliers and finally removed. The top hinge is disassembled;

1. The window is completely removable.

As you can see from the diagram, the answer to the question of how to remove a plastic window sash from its hinges is quite simple. All work can be done without the help of specialists and other people.

Wooden window sashes are removed using a similar technology.

After the necessary repairs have been carried out, the window sash must be put back in its original place. To do this, all steps are carried out in reverse order:

1. the window is put on the lower hinge. To do this, the sash is raised slightly and docked with the rest of the hinge;
2. the top loop is joined;
3. the fastening pin is inserted into its place (in the upper loop);
4. the hinges are adjusted. This process is necessary because during disassembly the initial setting of the loops is lost;
5. decorative caps are installed.

Thus, to remove the door from its hinges, you will need a minimum set of tools, which almost every man has. By following the instructions given, all work on removing and installing hinges can be carried out independently, that is, without the help of specialists. It is recommended to work with plastic windows and doors with extreme care so as not to damage the coating and structure of the material.

Sometimes during repairs you have to remove interior doors from their hinges In everyday life, it may be necessary to remove the door, and if a major renovation is underway, this is rarely done without it. The difficulty is that today there is no single type of hardware that is installed on all doors. And removing the doors, the complexity of this process will depend on the type of fittings.

Types of hinges: how to remove an interior door

Today, the following types of door fittings are used: card hinges, hidden hinges, and screw-in hinges. Each model has its own characteristics. Some are more convenient to use, but they will be more difficult to remove.

Great importance is attached to the choice of types of door hinges; this will determine how to dismantle the interior door

Types of door hinges:

1. Hidden. This type of fittings is considered the most impressive from the point that it can be completely hidden in the door leaf, which does not spoil the aesthetics of the structure; the hinges are simply not visible. But this feature complicates the installation of such hinges, as well as dismantling.
2. Card. The most popular type of loops. They are inexpensive and come in a variety of designs. They have subspecies, the most common of which are butterfly loops. They are screwed to the canvas without any special preparation, and their halves are made like a puzzle. But mortise hinges require deepening of the plates, that is, they cut into the door material.
3. Screw-in. Such loops are similar to hairpins that go deep into the box. They are either smooth or have carvings on the surface. The pins in the middle are connected by a hinge element. And the number of studs is different, on durable models there are three or four on each side. Typically, screw-in hinges are used for lightweight door panels; heavy ones will overload such a structure, which can lead to the fastening being torn out.

The design features of the hinges also affect the dismantling process. Each type of loop is removed in its own way. It also matters whether you are going to later install the door on the same hinge, or whether you will change the fittings.

Card models: how to disassemble a door hinge

All card models differ in their general structure. These are two straight or angular plates that are screwed to the frame and door leaf with self-tapping screws. They are connected by a hinge element, which sets the door in motion.

Information on how to remove an entrance or interior door may be needed when moving furniture from room to room or when carrying out renovations.

Most card models consist of 2 halves: an upper and a lower canopy. Because it doesn’t take much effort to remove the door. But it’s still easier to work with a partner, especially if the door is heavy or has glass inserts.

Do this:

• Support the door from below and lift it slightly;
• Then continue to move the door up, turning it slightly;
• When the upper half itself is removed from the pin, you can carefully remove the canvas to the side.

Dismantling a door with such fastening can only be done in the open position. Otherwise, you will not be able to raise the door to the required height; the leaf will simply rest against the frame. But a door with screw-in hinges is more difficult to remove.

Screw-in fasteners: how to remove an interior door from its hinges

The fact is that the hinge axis of such hinges is equipped with a small pin, which must be removed from the structure. This is necessary for the halves to separate. First the door needs to be closed. Then you take any convenient tool, push the pin up, and pick it up with pliers. Then gently pull the pin up, turning it a little as you go.

The door hinges are equipped with a hinge joint that allows the parts to remain mobile around a common axis

After this, the canvas can be removed without problems. The main load in this case is on the upper part of the structure, so it is more logical to start work from the lower hinge. To prevent the door from falling on you, you need an assistant to hold it.

Hidden hinges: how to remove a closed door from its hinges

Hidden hinge models are considered the most difficult to dismantle. A special tool is needed. You can carry out work with the door open and with the door closed. In the first case, half of the fittings are unscrewed with a screwdriver. If the product is more complex, you need an hex key. Sometimes the method of knocking out the axle is used, but this method is not so convenient, because the main part of the mechanism is hidden inside the canvas.

Among the wide variety of door hinges there are so-called hidden ones. Their name speaks for itself

If you remove a closed door:

• This is a complex method, but it can be used if we are talking about hidden hinges of a balcony block;
• In this case, the protective caps are simply removed, the axle is knocked out and the blade is removed in the same way as with a screw-in fastener;
• But there is no way to remove completely hidden hinges in a doorway in this position; perhaps only a specialist can do it.

Whatever the hinges are, if you remove them and then plan to put the fittings back, the mechanism needs to be lubricated. Examine the removed fittings; perhaps some defects have already formed and the fasteners need to be replaced. Sometimes it is even aesthetically no longer suitable; it makes sense to install a new one.

Removing the metal door from its hinges

The easiest way to dismantle iron doors is with removable hinges. The canvas opens slightly by 30-40 degrees, while some solid object is placed under the door. Then the canvas needs to be lifted using a crowbar. It plays the role of leverage in this case. And you do this for so long until the door itself comes off its hinges.

The procedure for removing the product largely depends on the type of hinge mechanisms used.

It will be more difficult to remove the door from the internal removable hinges. Such loops are usually supplemented with decorative elements; they need to be removed. Next, loosen the fastening bolt as much as possible, the one located on top of the hinge.

A door with hidden hinges is the most difficult to remove. You need to very carefully and carefully remove all the fasteners that secure the door in the frame. If you remove an old door, then use new fittings for the new one. When installing a new door, avoid possible distortion. For this purpose, either a building level is used, or a solid object is placed under the canvas.

How to remove an interior door from its hinges (video)

It is impossible to create a universal instruction for dismantling a door, since the design features of the hinges directly affect how to remove the door. Remember that the fastening mechanism is always cleaned and lubricated before reinstallation. If it is deformed, it should be replaced.