Glowing in the dark water is excellent remedy in order to make the party unusual and memorable. Also, the glowing liquid will cause a lot of positive emotions in children, who will be happy to pour the unusual cocktail from one glass to another. But do not forget that the liquid flickering with all the lights is not harmless water, but a chemical mixture. Follow the dosage and sequence of actions so that the end result brings joy and not additional hassle.

What is luminous liquid

The basis of a luminous liquid is a substance that can reflect light. In the case of glowing water they should not dissolve in water, otherwise the physicochemical reaction would not occur, and there would be no effect. The main active ingredient is organic or inorganic compound, which, when interacting with an oxidizing agent (hydrogen peroxide), is capable of emitting a luminescent glow. The catalyst can be iron or phosphorus; in their presence, the emitted glow is rich and intense.

Where is luminol used?

Luminol is a crystal that can glow in the presence of iron and other metals. It is actively used in forensic examination to detect washed-out traces of blood. Luminol is also used in chemistry lessons and as electrical insulation.

How to make a glowing liquid using luminol

Luminol has high price, and it is not so easy to buy in pure form. Liquid Luminol is sold in large barrels, it is used in transformer and distribution substations as an electrical insulating fluid. Naturally, no one sells it just like that, this dangerous substance Can only be used for industrial purposes. It is much easier to obtain luminol from the immunomodulator "Galavit", which contains the sodium salt of illuminate. For getting minimum quantity A solution with a volume of 50 ml will need 20 tablets or 40 sachets of 50 mg powder. The tablets are pre-crushed to a powder state. Then the resulting substance is dissolved in 50 ml of water. That's it, the luminol is ready.

How to make glowing liquid using luminol

Luminol is a yellow powder that begins to glow bluish in an alkaline environment.

1. Take 50 ml of luminol solution and pour it into a glass flask, preferably the kind used for experiments in chemical laboratories.
2. Add 40 ml of 3% hydrogen peroxide solution and stir.
3. Pour just a little bit of copper sulfate (ferric chloride) on the tip of a knife.
4. If no chemicals are found, add a few drops of blood from thawed beef or chicken liver.
5. Add 5 ml of caustic soda there.
6. Transfer the flask to dark room and turn on a small lamp or light candles. The flask begins to shimmer with a fluorescent blue glow. To change the shade, add a few drops of another dye.

There is another way to obtain luminous water. It is suitable for those who do not keep chemicals like copper sulfate at home.

• Dissolve a teaspoon of regular washing powder in a glass of water
• add 10 ml of hydrogen peroxide and 5 ml of luminol solution there
• stir, add a little potassium permanganate
• under the influence of an alkaline environment, the liquid will begin to bubble and shimmer in different colors

Remember to use chemicals very carefully. And also wash the dishes thoroughly after finishing the experiment. And it’s good if it’s just dishes. Because if the technology is not followed, the unexpected can happen. In a word, if you are not comfortable with chemistry, you should look for simpler ways to obtain luminous water.

1. Buy a highlighter (do not confuse it with a marker; a marker has a denser texture; highlighters are usually available in neon shades).
2. Check the text highlighter for fluorescent ink content (swipe it over a sheet of paper, take it into a dark room and light it slightly).
3. Take out the rod and cut it lengthwise. Place the contents in a glass warm water. Wait until the color filler goes into the water.
4. Add a little soda, then the liquid will bubble. Take the glass into a dark room and illuminate it.

Glowing water from pine concentrate

1. Take pine concentrate on the tip of a knife (it contains salt filler, fir essential oil, salt filler).
2. Pour a glass of water and add pine needle concentrate there. Take half a tablespoon of boric acid. Hold a spoon over the fire (turn on the burner, light a candle).
3. Slowly pour in a little pine solution and heat to a boil.
4. The result crystalline substance called a phosphor, it gives ordinary water a glow.

The phosphor can be used as a basis for luminous paint. To do this, take transparent nail polish weighing 7-8 grams and mix the contents with 2-3 grams of phosphor. To add a tint, add a drop of regular luminescent paint. Of course, the paint will not shine as brightly as store-bought paints. But its brightness is enough to produce the desired effect.

To create glowing liquid using improvised means, you need to have at home at least luminol powder or Galavita tablets, which contain the necessary components. With luminol the glow will be much brighter and last longer. For greater safety, use safe materials like a marker pen or regular laundry detergent. Remember about safety measures, do not harm yourself.

Video: how to make glowing liquid at home

Sometimes, to create an unusual atmosphere at home, it is not necessary to spend money on expensive fixtures. Glowing water will help you surprise and delight your family, which is easy to make with your own hands and simply pour into a jar or bottle, thus obtaining a suitable “candlestick”. It turns out that to make the evening atmosphere in the house truly interesting and even magical, you just need to have some container and ordinary water on hand, which we can easily turn into fluorescent - this is the name of a liquid with a light-accumulating effect. There are many recipes for making colored glowing water at home, which makes this substance accessible even to people who do not have access to expensive chemicals. In this article we will look at several options for creating fluorescent liquid- sometimes it is called neon, because neon has the property of glowing - which will make it possible to make it from the most different materials.

Before making luminol at home, it is important to familiarize yourself with the rules that will help Maximize the safety of the production process, and prepare the necessary things in advance. You will have to remember the safety instructions from chemistry lessons, because when creating luminous water you will need to come into contact with various chemicals.

First of all, you will need to protect yourself special clothing. This will help avoid direct contact with reagents and reduce the risk of injury when working with them. Buy special gloves and glasses, and wear only cotton clothes when making fluorescent water. Some chemical substances may behave aggressively if they accidentally fall on clothing and come into contact with synthetic fibers.

Prepare special dishes , in which all chemical processes will be carried out. As soon as the experiment is completed, these containers will have to be disposed of, since tiny particles of the used reagent may remain on them, and the next experiment carried out in the same containers may result in adverse consequences. Remember that it is dangerous to let young children near reagents, so try to keep them away from the experience or make sure they have sufficient safety awareness.

Production of luminol

As noted earlier, there are several methods by following which you can make a luminous liquid. The choice of recipe depends on the substances included in luminol. There are options that allow you to make an original fluorescent liquid using chemical reagents, and those that tell you how to make a luminous liquid from improvised materials.

Glowing water without luminol

Luminol is the main element for creating a luminous liquid. The substance, when placed in a neutral or acidified environment, activates its properties and begins to glow light blue. It is thanks to this substance that the fluorescent water trick works. True, luminol is an expensive and hard-to-find component that can only be found in specialized stores, so not every person will decide to purchase it just for the sake of experimenting with luminous water. But if there is no opportunity to buy a chemical substance, but you want to conduct an experiment, you can use following instructions, which will tell you how to make glowing water without luminol.

Getting the liquid is quite simple. To do this, you need to stock up on water, hydrogen peroxide, salt, vinegar and do not forget about safety precautions. Although the components may seem harmless, it is better not to take risks and ensure maximum safety for yourself. Water used in the experiment must be carbonated.

1. Take a container with pre-filled soda (it is advisable to take a container with a lid), and then add salt to it in a volume of no more than a teaspoon.
2. The next item is vinegar. Add no more than three capfuls to the liquid.
3. Pour the final component, hydrogen peroxide, into the container. The volume of the substance should not exceed three teaspoons.
4. Pay attention to the condition of the resulting liquid. If components were added to correct sequence and the right volume, it should begin to hiss.
5. Close the container well with a lid and, holding it in your hands, stir. This must be done with special care, so the step can take up to fifteen minutes.
6. From the container, pour the resulting liquid into a glass or jar to see its glow.

Liquid using luminol

The original recipe for fluorescent water involves adding a special chemical component to the liquid - luminol. If you want to use chemical reagents during the experiment, remember the safety precautions and warn yourself against all the adverse consequences that may occur. To achieve the desired effect, follow the instructions below.

Glowing water with vitamin B

This is the most harmless recipe for fluorescent liquid, which is more useful for filling large containers. For example, you can fill a bathtub with this water and, after turning off the lights, give yourself or your children a session of pleasure water treatments with backlight. Below are instructions on how to how to make glowing liquid at home using vitamin B.

1. Fill the bath, but keep in mind that the volume of water collected should not exceed fifteen liters.
2. Dilute water with B vitamins purchased at the pharmacy. For the powder version of the component, use 15 cans, and for the liquid version - 15 ampoules.
3. Light the bathroom with a fluorescent lamp to reveal the properties of the vitamin.

When bathing in such a bath, you need to take one important precaution and under no circumstances drink the resulting liquid. If you feel that drops of luminous water have entered your mouth, immediately rinse it well with ordinary water.

Illuminated clothes

Based on fluorescent liquid, you can make your clothes glow in the dark. Below is a diagram for making luminous laces, but you can dye any other item of clothing using the same method. The recipe for making such things is simple and does not require special costs and purchases of chemicals.

Glowing water- An excellent material for home decoration. Having made several multi-colored versions of this liquid, you can pour them into jars and place them around the room. Luminol will become the most suitable option for romantic dates and simple decor premises. How to do this - watch the video.

It is very interesting to watch the work of magicians and illusionists. They delight not only children, but also adults. Some transformations are within everyone's power if you want to pleasantly surprise your family or friends. For example, there are simple ways make glowing water at home. This great option experiment to create a festive atmosphere.

Any holiday or party will become unforgettable if you add something unusual. Glowing in dark room the liquid will give a lot of positive emotions to everyone, but most of all to children. They will watch her with delight in a darkened room.

However This type of entertainment can be dangerous if not handled correctly.. Attractive at first glance, the liquid is a chemical mixture. Care must be taken when handling it. All work must be carried out with gloves, glasses, and cotton clothing. It is advisable to throw away the dishes after preparing luminous water. For safety reasons, children should not be allowed during preparation of the composition.

The basis for creating such an attractive liquid is chemicals that can reflect light. They should not dissolve in water, because then the expected effect will not occur. For manufacturing, an organic or inorganic compound is taken, which, when interacting with an oxidizing agent, emits a luminescent glow.

The catalyst is iron or phosphorus, since these substances can make the glow more intense and rich.

Creation from improvised means

There are many recipes for making glowing liquid at home. To conduct an experiment, you must have certain components. It is very important not to change the proportions indicated in the recipe yourself and to prepare strictly following the dosage.

Purchasing all the ingredients is not an easy task, since they are sold in stores that specialize in selling luminol ( chemical reagent). This substance is expensive and is a powder. yellow color. When it enters an alkaline environment, it begins to glow bluish. In addition to luminol, you must have:

• table vinegar;
• hydrogen peroxide 3%;
• table salt;
• water;
• dishes.

If you use more complex ways preparing a luminous liquid, you may need: copper sulfate, luminol, potassium permanganate, brilliant green. The last two substances act as fluorescent dyes.

It’s not easy to buy a chemical reagent, but there is an easy way to make luminol at home. It can be obtained from the immunomodulator "Gelavit". It contains sodium salt of illuminate. To get 50 g of the substance, you need to take 20 tablets and turn them into a powder. Then dissolve the finished powder in 50 ml of water to obtain the finished luminol.

Simple recipe

To obtain luminous water in this way, you do not need to buy expensive components. They are always available because they are available in every home. To make the liquid with your own hands, you will need the following substances:

• 500 ml water;
• hydrogen peroxide 3%;
• salt;
• vinegar.

Salt and vinegar are used for food purposes. You need to take 2 tablespoons of the first ingredient and 4 tablespoons of the second. When all the components have been selected, they must be placed in a glass container where you plan to prepare the luminous liquid. For radiation to occur, the composition must be stirred for 20 minutes. When it starts to glow, pour it into a plastic bottle and close it tightly.

The resulting composition will glow for 1-2 hours, which is quite enough to demonstrate its capabilities. Usually the liquid takes on a greenish and blue tint. Sometimes, for better clarity, dyes are added to change the color. Food grades with neutral are mainly used chemical composition. Fluorescent substances from a specialized store will give a very effective and more lasting result.

You can put the liquid into the empty pen ampoule using a syringe. This subject will interest any student. Large containers, For example, plastic bottles, can be used as a lamp or lantern in nature by securing it with a cord to a tree branch.

Other modification

For this option for preparing a luminous liquid, you will need to go shopping at the pharmacy. The purchased items will help you get the desired result at home. To experiment you need to have:

• boric acid in pure form;
• concentrated pine needle extract;
• water for injections about 500 ml.

First you need to dissolve pine extract in water. To do this, you will need to dilute 1 drop of the composition in a tablespoon of water. The resulting solution must be gradually introduced boric acid similar concentration. Heat the prepared liquid over medium heat and let it boil. At the moment of boiling, remove large bubbles with a spoon.

Everything must be done carefully, wearing gloves, so that the liquid does not get on the skin. 10-15 minutes after boiling, the water will become beautiful and impressive. In the dark it will flicker with yellow-green lights.

There are also alternative method using sparkling water and baking soda. To prepare, take 0.5 liters of water and add 1 tsp. soda, as well as a couple of teaspoons of 3% hydrogen peroxide. The composition is shaken for about 15 minutes, and almost immediately after that it begins to flicker with a yellowish glow.

However, this method allows you to admire such things for a short time, no more than 5 minutes.

The hard way

There is a recipe using Dimexide, which achieves the most lasting effect. Except medical product, you must have:

• glass bottle with metal cap;
• 450 g of clean water;
• 35 g of dry alkali;
• 2−3 g luminol powder.

It is better to buy alkali and luminol at a store that sells chemicals. To prepare, take 30 g of Dimexide and mix with other components in a glass container. It should be tightly closed with a lid. Within 15 minutes it will begin to fluoresce. The glow will take on bluish tints. If desired, it can be changed by adding dyes. However, after 20-30 minutes, the glowing water will gradually fade away. To restore the original brightness, you need to open the cap in the bottle for a few seconds.

To achieve a positive result and do nice evening V close company or family circle, it is recommended to do everything according to the instructions. You must be careful, be careful and use all ingredients in strict order.

Some time ago, a video appeared on the Internet that showed how to create luminous water. There was heated debate in the comments: some claimed that this was possible, others categorically denied everything that was happening on the screen. After watching videos for a long time, illustrating similar experiments, many had a desire to dispel all the myths.

The first myth. Glowing liquid is still drinking water. It’s a pity for those people who are misled by guaranteeing that this liquid cannot harm the body. You should not believe this, even if someone proves it from their own experience. After all, at that moment there was no one next to them, and you can say whatever you want. During the reaction process, the vessels may form chemical compounds, which will have a detrimental effect on your health!

The second myth is associated with the statement that you can make a luminous liquid with your own hands using only hydrogen peroxide, soda and vinegar. Each of us went to school, and if we didn’t skip chemistry classes, we can clearly answer that nothing like this can happen. Soda will react with acetic acid, as a result of which we get salt and water.

Glowing water is also obtained using a specific lemonade. For those who want to try, here is the recipe from the author of the very first video. We will need:

• the food drink Mountain Dew, widely distributed in Russia;
• baking soda, which can be found at any grocery store;
• hydrogen peroxide, which can be purchased at any pharmacy without a prescription.

So, you need to leave some of the drink in the bottle. Then add soda to the lemonade at the tip of a teaspoon and pour 3 teaspoons of hydrogen peroxide into this solution. Close the bottle and shake well. Of course, there are no guarantees or certainty that the desired reaction will occur.

There are real recipes for making luminous liquid for those who still want to achieve results. In this case, the chances of achieving the desired effect are much greater. But if the liquid does not glow in the dark after the experiment, then the wrong components were probably taken.

This recipe includes substances used in chemistry. All information provided below is for informational purposes only! The recipe is based on the substance luminol, distinctive feature which is that it gives a blue glow in aggressive environments.

DIY glowing liquid recipe

To prepare a luminous liquid with your own hands you will need:

• 2-3 g luminol;
• 80 ml 3% hydrogen peroxide;
• 100 ml water;
• 3 g of copper sulfate (ferric chloride or red blood salt);
• 10 ml caustic soda;
• fluorescent dye.

For getting luminous substance it is necessary to pour luminescent powder into the vessel and add water to dissolve it. Then pour hydrogen peroxide into the solution and add copper sulfate. To start the reaction, it remains to add the last component - caustic soda. After this, the liquid will begin to emit a blue glow. To obtain a variety of color shades, you can use fluorescent dyes.

Finally, we would like to wish you success in your experiments and remind you of safety measures. All substances used in the experiment are chemical, which means that they can cause poisoning or even lead to tragedy! Therefore, you should not use dishes that are intended for food in the experiment. If such dishes have been used, they must be washed thoroughly, or better yet, thrown away altogether. Do not neglect your health and the health of your loved ones!

6 6 731 0

Do you want to surprise your friends or acquaintances with something unexpected at a party? Of course you can do it yourself interesting crafts, for example , or . These items, of course, will decorate the interior and make the atmosphere more festive, but they are unlikely to surprise. We have prepared a more unconventional idea for you. If the party or celebration is planned for the evening, we suggest you make your own glowing water at home. Guests will definitely be delighted with what they see. Get acquainted with all the methods for preparing a bright liquid, choose more for yourself convenient way and get to work. Good luck!

The easiest way

• Water one part
• Peroxide one part
• Vinegar one part
• Salt one part

It is advisable to choose a glass container that can be closed with a lid. Combine all of the above ingredients in equal proportions. Close the container with a lid. And shake until colored water appears before your eyes.

Please note that during the preparation of this liquid, ingredients included in the composition may come into contact with the skin. To avoid triggering an unwanted skin reaction, be sure to protect yourself: wear gloves and do not leave parts of your body exposed.

With added soda

For preparing liquid bright color you just need:

• Soda 1 tsp.
• Sparkling water 0.5 l
• Peroxide 3 tsp.

All components that are included in the composition are the same as in previous version you need to combine and shake well. The reaction will also be amazing. Just to make a liquid that glows with these ingredients, you will have to shake them for about 10 minutes, sometimes more.

With phosphor

To prepare a bright-colored liquid you will need:

• Luminol 0.15 g
• Dry lye (KOH) 0.75 g
• Dimexide 30 ml

The container you will need is the same as in the previous methods: glass with a lid. Pour all ingredients into the container. Screw on the lid. When the ingredients are mixed together, you will see a bright light. If the glow subsides, just open the jar slightly and it will shine again.

To change the color of luminous water, you just need to add a little fluorescent dye to any of the solutions.

Glowing paint

You already know the simplest ways to make a bright liquid that glows beautifully at home. Another one interesting idea for a party - colors that also reflect in the dark bright light. You can buy them ready-made, or you can make them yourself. To do this you will need:

• Paint 0.5 kg
• Luminophore 175 g
• Varnish 375 g

Combine all ingredients and stir. You can paint different patterns with this paint that glow at night in an original way, or paint body parts for yourself and your friends.