How to make a table with lighting: ideas, materials, step-by-step instructions, photos and videos. Unique DIY infinity table DIY coffee table with infinity effect

Leave a message!

I'll make it custom-made table with infinity effect according to your sizes. From order to finished product no more than 21 days. Delivery to all regions of Russia by the best transport companies with 100% insurance.

div > .uk-panel", row:true)" data-uk-grid-margin="">

Advantages of ordering a table with an infinity mirror from us

Infinity table- this is one of the main design directions of the Sofia-Led company. Our specialists put their whole soul into the creation of each piece, which is made by hand. No conveyors or production lines during assembly. Individual approach for each product. The principle of such a table is very simple, everyone has known about it for a long time, and its “composition” also does not stand out as anything that could not be bought in a nearby store. But there is one “but” - you need to assemble this “constructor” correctly. Only collected in in the necessary order, With correct sizes and distances, an ordinary table will turn into a table with an infinity effect.

Our tables are made using modern equipment And latest technologies. The finished table does not look like a handmade item. This is facilitated by vast experience in assembling similar products, as well as the availability of all the necessary modern tools.

It is not a shame to give our table with an infinity mirror to colleagues, friends or relatives for a holiday. Do you often host guests and want to amaze them with something unusual? Brew tea and seat your guests at our table, and the infinity tunnel with dynamic lighting will capture their gaze for a long time. Let's now take a closer look at the benefits of our infinity mirror tables:

• Ability to use absolutely any table. Thanks to the availability necessary equipment and vast experience we can put the infinity effect on any table. It doesn’t matter either the thickness or its dimensions.
• Only quality materials . We use time-tested materials and components - from glass and mirrors to LEDs and power supplies.
• Maximum number of repetitions. Everyone knows that the more repetitions, the more effective the visual effect. Our mirrors give about 20 repetitions. In certain cases we do more.
• Very deep tables. Want deep reflection? No problem. We will achieve this without interference appearance table.
• Installing additional lighting. We illuminate not only the inside, but also the outside.
• Additional curly patterns. Using professional equipment Let's add a beautiful patterned cutting to the table.

How we make a table with an infinity mirror

When installing an LED strip, we turn to the section of physics - Optics. We believe that carrying out calculations according to the laws of optics is mandatory, and only with strict adherence to all proportions can ideal dispersion and reflection of light from LEDs be achieved.

Additional table lighting

When installing lighting inside, creating an infinity tunnel, we always suggest additional illumination of the table from the outside. We basically use the same color as the inside. This technique visually expands the visual perception of the infinity tunnel. But if desired, we can add adjacent colors, for example, the backlight is red, and around it is a few tones lower or orange. There are a lot of options for creativity.

Additional patterns

Using various styles When decorating a table, sometimes it wouldn’t be a bad idea to resort to a certain design option, for example, “Baroque” or “Gothic”. We will add beautiful stenciled patterns symmetrically from the infinity tunnel, which we will highlight in any color of the client’s choice.

Below you can choose a ready-made table with standard sizes. But if you need a table with non-standard parameters: round, oval or other irregular shape, lighting according to own design etc. - Please, Contact us and we will be happy to fulfill your order as soon as possible.

Beautiful and original furniture attracts the eye. You can look at it endlessly; you want to surround your space with it both at home and at work. But many people know that designer tables or the chairs are not at all budget-friendly. However, if your hands grow where you need and eat minimum set working tools, then creating original furniture is within your capabilities. DIY infinity table - direct to that proof. And you will find out by carefully reading our article.

Unusual table

This invention is not the work of a design department. furniture factory or a designer who never leaves the pages of glossy magazines. Instructions for creating such a table with an infinity effect with your own hands appeared on the photo hosting site “Imgur”. In just a few hours, the post received more than 60 thousand views. And it turned out that its author was an American high school student who spent three months preparing the project for the youth forum.

Many people liked his invention, and the instructions for creating a table with an infinity effect with their own hands were immediately tested by dozens of craftsmen. Such simple furniture suitable for any room:

• A table with homemade lighting will fit perfectly into the office interior. Any visitor will immediately pay attention to such furniture and everyone will remember it. It will not be surprising if they want to visit your office again.
• In an apartment or private house, such a table would also be quite appropriate. It is ideal for family and romantic meetings. When fully served, it will cause delight and genuine interest among your guests.

Important! At first, it seems that there is nothing special about this table, as long as the backlight is turned off. But as soon as the LEDs installed around the perimeter of the tabletop start working, a feeling of a bottomless surface appears. It looks amazing with the lights on, but it's even more impressive in the dark with the main lights off.

The illusion of infinity

When creating a seemingly complex 3D table with your own hands, a simple display principle is taken as a basis:

• The infinity effect is achieved quite simply - using LED lighting around the perimeter, made in various color variations.
• Table top in in this case is a DIY design of mirrors with an infinity effect.
• To light radiation was as visible as possible; the top glass in this design is made of translucent material.
• Experts advise choosing red diodes. It is he who is less prone to scattering than others, so the visual tunnel will seem deeper.
• To control the backlight, the on/off button or a special remote control can be used.

Some craftsmen use simple garlands when creating a backlit table with their own hands. But it’s still better to use LEDs, as they have a number of advantages:

• More saturated and deeper light than using conventional lamps;
• LED strips are quite durable and resistant to any vibrations;
• Ice lamps burn out much less often; each of them can work continuously for about 100 hours;
• The color range of LEDs is much richer and more varied;
• The service life of the Ice backlight is not affected by the number of turns on and off;
• They are environmentally friendly and safe;
• With all the advantages, LEDs are also much cheaper than conventional lamps;
• Impacts low temperatures they are not afraid.

Important! Today, there are several ways to connect an LED strip to various sources power supply, be it a regular outlet or a computer. It all depends on your imagination and financial capabilities.

Table installation

As we have already said, finding such furniture in a store or market will be quite difficult. Therefore, a DIY table with an infinity effect is the easiest way to get an exclusive item in your interior. To do this, it is enough to know the sequence of actions and focus on the result.

Materials and tools

Of course, when creating a 3D table with your own hands, you cannot do without tools and materials. During this work you will need:

• lumber to create the table itself - both wood and chipboard are suitable for this;
• sandpaper for wood processing, however, if you are working with already ready-made parts, ordered at production, this material can be excluded from the list;
• a mirror of a suitable diameter, which will serve as the base of the tabletop;
• translucent mirror - it should be 10 cm larger than a regular mirror, since this part is installed on top of the tabletop and covers all parts of the upper structure;
• LED strip - its length will depend on the size of your future table with DIY lighting;
• power supply for LEDs and wires;
• self-tapping screws;
• Super glue;
• Double-sided tape;
• screwdriver

Important! If at this stage you have a question, how to make an infinity mirror with your own hands, then the tinted surface can be replaced with a regular one, having first applied a tint film to it. There is also an alternative to a regular mirror:

• To do this, food foil is glued to the glass;
• For work, mirror-coated glass is purchased.

If you doubt whether glass with a reflective coating is suitable for making a coffee table with an infinity effect with your own hands, then you can check it as follows:

1. Carefully, so as not to drop, place the mirror and glass in front of each other.
2. Any light source - an ordinary lamp, and better backlighting, which you will use, place between them.
3. Evaluate the resulting effect.

When preparatory stage finished, it's time to start assembling the 3D table with your own hands.

Drawing development

First of all, you will need a design drawing, drawn up taking into account all the dimensions of the future piece of furniture:

• Before you start assembling the infinity coffee table with your own hands, you need to think about where the electrical elements, affecting the quality of illumination and the creation of the desired effect.
• After this, it is necessary to mark the exact location of the socket, switch, and potentiometer on the drawing.

When assembling mirrors with an infinity effect with your own hands, you must take into account one very important factor - the depth of the tunnel that you want to see in the finished furniture. It is achieved by maintaining a certain distance between the tabletop parts:

• if you want to know in advance what the depth of the tunnel will be, then multiply the distance between the mirrors by 16 to get the approximate apparent depth of the tunnel;
• if the result does not suit you, then when drawing up the drawing, take into account and indicate how much you need to increase the space between the parts of the tabletop;
• In most cases optimal distance There is an 8 cm segment between the lower and upper mirrors, but here everything depends only on your preferences.

After the drawing has been drawn up, you can begin assembling the backlit table with your own hands.

Base assembly

In order to get a new one, original item interior, can already be used ready-made furniture. To do this you will need to detach the table top. We suggest considering the option of creating a backlit table with your own hands from scratch:

1. First, we create a strong and durable frame for future furniture. To do this, we take 4 boards, 4 metal corners that will hold the structure together and bottom part designs.
2. Now we use sandpaper. We use it to process the surface and edges of each detail of the future table with the infinity effect with our own hands
3. Using a drill, we make holes for the elements according to the drawing. They also need to be sanded.
4. Let's move on to assembly. To do this, we connect the parts into a single structure; the joints can be additionally glued to increase the possible load on your future backlit table with your own hands.
5. It is better to keep the finished base for 24 hours so that all joints dry out and the structure gains strength.

Assembling the tabletop

Now we move on to creating a mirror with an infinity effect with our own hands, which gives originality to this furniture. As we have already said, you can use mirrors, or you can replace them with glasses with pre-treatment. The second is a more complex option, and we suggest you consider it. In this case, to the list necessary tools It's worth adding a glass cutting device. General scheme the work looks like this:

• Cut out a part from a plexiglass blank required sizes. We calculate the width and length at the stage of drawing up the drawing.
• Then we process the edges of this part in order to simply avoid injuries during work.
• We glue a mirror film onto this part of the future table with the infinity effect with our own hands.

Important! It is better to first spray the surface with water, or even better, with a soap solution. Then, during the gluing process, air bubbles trapped under the film will be easy to remove.

• We cut off the excess film around the edges and wait at least 12 hours for the part to dry thoroughly.

While the mirror is drying, we figure it out general structure table top. In cross section it will look like a layer cake:

1. The base of the structure is a mirror, which is placed with the reflecting side up.
2. The side of the table top body is attached to the main mirror.
3. The front chipboard frame is attached to the installed sidewalls. Its outer diameter, as we have already said, can be equal to external frame table. But the inner one needs to be made a little smaller.
4. A translucent mirror is already installed on the frame of our table with the infinity effect made from wood board.
5. The LEDs are attached around the perimeter of the front frame using double-sided tape. Moreover, this must be done in such a way that the light bulbs from above are not visible, but they should be reflected in the mirror, which is installed as a base. That's why external dimensions the frames are made larger.
6. The wires are laid inside the frame, which should be hollow. If there is a need to remove the wires, then do it yourself by drilling holes of the required diameter in the legs of the future table with lighting.

After this, we fasten the entire tabletop structure with screws and finish assembling the table. It is also worth assembling the control panel. It includes a switch, power slot and potentiometer.

• In order to create a glowing table with an infinity effect with your own hands, you should carefully study in advance the diagram for connecting the LEDs to the power source. If you do something wrong at this stage, it can lead, at best, to a short circuit, at worst, to a fire.
• As a rule, glass is covered with a special protective film before work in order to avoid scratches on the surface during the process. If you do not skip this stage, the surface of your furniture will have a presentable appearance.
• If your table is not square but round, then when cutting glass you will need double-sided tape. Using it, secure the router in the middle of the workpiece, then you will be able to make the circle perfectly even.
• When creating a table with an infinity effect with your own hands, you should use only waterproof glue. Surely, when further exploitation you will spend wet cleaning furniture, and no one is safe from knocking over a cup of tea onto the surface.
• It is better to secure the LED strip around the perimeter of the tabletop using high-quality double-sided tape. Before assembling the structure together, you should make sure that the LEDs are securely fastened. If even a part comes off while using the table, the integrity of the illusion will be compromised, and you will have to disassemble the entire structure to eliminate this defect.
• Control details LED backlight best placed in plastic box and secure it under the table top. You should not hide it inside the structure; it is better to leave free access to the block in case of breakdown.

If you have enough good knowledge electrical engineering, then you can make a table with spectacular lighting that will respond to movement. For this you will need.

This coffee table takes on real charm in complete darkness. A bottomless well glows in the center of its tabletop: Hundreds of cold lights stretching into infinity fascinate and attract the eye...

At the same time, the table does not lose its intended purpose: you can serve it for a romantic dinner or use it for tea.

A round tabletop with a diameter of 120 cm and a thickness of 2.8 cm made of solid pine, as well as a table leg with four supports, were purchased ready-made at a building materials store. In addition, manufacturing required a sheet of mirror, tinted glass and LED strip. I will say right away that the mirror can be replaced with glass by gluing on it food foil. And instead of tinted glass, take regular glass and a special tinting film.

The working tool that I used to make the table: manual frezer, jigsaw and drill.

The “well” is shown in section in the drawing. As you can see, it consists of 3 cylinders. The diameter of the middle cylinder was chosen based on the length of the LED strip (the circumference is equal to the product of the diameter and the number P). In my case, the length of the LED strip is 157 cm, respectively, the diameter of the base of the middle cylinder is 50 cm. The diameter of the base of the upper cylinder is 50.5 cm, and the bottom is 49.5 cm. Therefore, I cut out a circle of mirror with a diameter of 50 cm, and a circle of tinted glass 50.5 cm. I entrusted the cutting to a professional from a glass workshop.

First, I cut out a cylinder of smaller diameter. I used a jigsaw to make a through hole with a diameter of 49.5 cm in the center of the tabletop. To do this, it is convenient to use a template - a circle. It can be made from plywood, plastic or hardboard. Then, stepping back 1 cm upward from the bottom edge, I removed the walls of the hole by 0.5 cm with a milling cutter to prepare a protrusion for the mirror. Since the thickness of the tinted glass is 40 mm, the upper protrusion was made 0.5 cm deep and 0.4 cm high. I also cut it out with a milling cutter.

To connect the LED strip, I drilled a through hole at the bottom of the middle cylinder to route the electrical wire under the tabletop. Then I placed the mirror on the lower ledge. For fastening, you can use double-sided tape or glue.

I glued an LED strip to the wall of the middle cylinder (the distance from the strip to the mirror and glass should be approximately the same). I connected the tape to the power supply and secured it to the bottom surface of the tabletop. And then he covered the “well” with tinted glass. The gap between the glass and the wood was filled with transparent silicone sealant and attached the leg to the tabletop.

Reading time ≈ 6 minutes

You can make your interior unique and original with the help of unusual pieces of furniture, for example, a table with an infinity effect. Making such a thing yourself will not be difficult if you use simple instructions. The finished product will organically complement any modern interior and will cause genuine delight among household members and guests!

Table with LED lighting.

Feature of the table

Externally, the table is not much different from any ordinary coffee table. However, as soon as you turn on the backlight, the tabletop of the product begins to flicker and glow with hundreds of lights, creating the illusion of infinity. I want to admire such magic all the time, but those who are indifferent to unusual table will not be found either among adults or among children.

Coffee table Illuminated IR looks especially impressive when the lights are off in the evening.

The infinity effect is achieved thanks to the special design of the tabletop - its box consists of two mirrors, and a diode strip is installed on the sides. In this case, a translucent mirror is selected for the top cover so that the light pattern is more noticeable and pronounced.

The design of the product is shown in more detail in the photo below:

Design.

You can turn on the product using remote control or a special switch on the box.

To illuminate the tabletop, you can choose diodes of any desired shade or combine several colors. But experts especially recommend taking a closer look at the red diodes - due to slight dispersion, the endless tunnel acquires more depth.

Such unusual item The furniture is perfect for both home use and office placement. It can be made in absolutely any size and from any materials.

Table with lilac lighting.

Materials and tools

You can make an exclusive piece of furniture with your own hands. To do this, prepare necessary materials, tools and follow the step-by-step instructions.

To make a table you will need:

• boards for the frame (wood or particle board);
• mirror according to tabletop parameters;
• translucent mirror. The dimensions should be 10 cm larger than the bottom mirror;
• self-adhesive diode tape, length depending on the size of the table, but not less than 1.5 m;
• materials for connecting the tape: controller, programmer, wires, power supply with USB;
• consumables: sandpaper, glue, screws, metal corners.

Instead of a translucent mirror for the top cover, you can take regular glass and cover it with tinting film yourself.

Idea: to reduce work in any furniture store you can purchase the simplest table in design and use it as a ready-made base.

Why choose LEDs:

1. They give a rich, beautiful, deep shade.
2. Longer service life without burnout (the number of on/off switches does not affect the service life).
3. No heating.
4. High efficiency.
5. Various colors.
6. Reasonable price.
7. Light bulb safety.

Assembly

Before assembly, it is necessary to develop a drawing of the table, calculate the distance between the mirrors, the number of diodes, and think about the location of the electrical elements.

To get an idea of ​​what the twinkling lights will look like in finished product, just place any light source between the bottom and top of the table and look at the result.

Regarding the distance between the mirrors, everything is individual and depends on your wishes. But often the average value is chosen - 8 cm. To calculate the depth of infinity, the distance between the covers must be multiplied by 16. Also keep in mind that the depth of the tunnel will depend on the light transmittance of the top cover. After all the calculations, you can proceed directly to assembly.

Step-by-step instructions for making a table with an infinity effect with your own hands - making the base:

1. From bars with a cross section of 5*5 cm and metal corners you need to make the frame of the future table. For fastening, use screws and a screwdriver.
2. With help sandpaper Carefully process all edges and corners to make them smooth and remove burrs.
3. Drill holes for electrical elements using a drill, follow the drawing. The holes need to be sanded tighter.
4. For additional fastening of the structure, you can treat the joints with glue. After this, the frame must dry for at least 24 hours.

Frame assembly.

Assembling the tabletop step by step:

1. To a sheet of plywood the right size attach boards (section 5*1 cm) along the outer perimeter, and at a distance of 5-6 cm along the inner perimeter. There should be a kind of gutter between the boards - this is where the wiring and electrical elements will be placed (see photo above).
2. Place a mirror on the bottom of the tabletop with the reflective side facing up.
3. You need to attach the LED strip to the inside of the smaller frame using double-sided tape.
4. Wiring is installed in the space between the frames.
5. Attach the top mirror cover to the tabletop.
6. The entire structure is held together with screws.

Assembling the tabletop.

At the end of all the work, you should end up with something like this table with a mirror surface:

Finished product with the backlight turned off.

However, it is worth understanding that you can make a table with an infinity effect from any material that you know how to handle - for example, plexiglass, plastic, metal.

1. When working with mirrors and glass protective film remove only after all processes are completed.
2. Be sure to thoroughly study the diode connection diagram to avoid short circuit, or even worse - fire.
3. For fastening, use moisture-resistant glue.
4. In case of breakdown electronic parts It will be convenient to have free access to them, therefore it is better to place the controller and programmer not inside the table, but outside - placing it in a neat box and securing it under the table top.

They use all kinds creative ideas to attract the buyer's attention to your product. Self-taught craftsmen successfully plagiarize creative inventions, trying to add their own characteristics to the design. So, the table with the infinity effect looks bright and original, not from some famous manufacturer furniture, but one that is made with your own hands. It’s not easy to design something like this, but it’s possible if you’re striving for something new, have carpentry skills, and want to try your hand at making furniture. Knowledge of technology is also important, especially schematic diagram LED operation.

How do you achieve the illusion of infinity?

When you look into such a space, it seems that somewhere in there, in the depths, there is a portal to another dimension. To achieve this effect, you will need only two mirror sheets, suitable in size, and LEDs that are located between them, with inside. Choose the color of the lamps that you like best.

Important! Experts advise using red light bulbs for design mirror table with infinity effect. With their help it is possible to achieve maximum effect due to the property of color - it is less prone to dispersion than others.

The backlight can be controlled by an on/off button or a special remote control.

Getting Started

To design a table with an infinity effect, you will need a set of tools and materials. The master will need the following in his work:

• chipboard or wood boards;
• sandpaper;
• mirror cloth with dimensions 60x70 cm;
• translucent mirror with a width 10 cm larger than a regular mirror. It can be replaced ordinary glass, covered with a mirror film;
• power supply with USB output;
• LED strip on self-adhesive base- 1.5-2 m;
• wires;
• USB cable for powering the microcontroller;
• programmer;
• microcontroller;
• self-tapping screws;
• Super glue;
• screwdriver

The version of the table with the infinity effect, made using a garland, looks interesting. This option is simpler to implement and will not be as expensive as a design that requires the purchase of special equipment.

How to assemble a tabletop?

Taking four boards, twist the frame (sidewalls) of the future table with an infinity effect. Glue a mirror onto the front side of the box, choosing a reflective surface that matches the size of the base of the cabinet.

Assemble the LED frame. In terms of dimensions, this part should be equal to the outer diameter of the frame, and in terms of the inner diameter, it should deviate inward from the edges by 1-2 centimeters. Having finished making the box, glue an LED strip on the inside of the frame and screw it with self-tapping screws to the ready-made sidewalls of the structure.

Now we have to work with electronics. Start with the holes that need to be drilled to bring the wires out. After this, attach the translucent mirror surface to the frame using special screws.

Important! Craftsmen advise nailing thin strips along the edges of the frame, forming a single plane in height with the glass. At the final stage of work, the upper frame is attached to these slats, ensuring reliable fixation.

Subtleties of table design

Not every craftsman can make a coffee table with an infinity effect. Furniture makers have plexiglass and self-adhesive mirror films, simplifying the design process. Inside the box there are two walls that mutually reflect each other. The one facing the mirror is processed additionally, or translucent glass is purchased, although this material is quite rare.

Don't forget to pay attention to the depth of the tunnel located between the two mirror surfaces. It is determined based on the following indicators:

• distance between surfaces. By multiplying the actual width of the opening by 16, you can get a number characterizing the depth of visualization;
• throughput of translucent material.

Important! A table with a 3D infinity effect, made by yourself, will last longer, and the backlight will work without failures if you choose a power supply with a 50% power reserve as the electronic carrier.

How to assemble the base and legs?

Having completed the work of constructing the tabletop, all you have to do is put the bedside table on its legs. To do this, choose solid wood with a section width of up to 10 cm. Wires will be hidden in one of the volumetric legs. This move allows you to make the design aesthetic.

Wires are also removed from the countertop, but such a product looks less attractive and at the same time does not differ in functionality.

Having purchased the blanks or assembled the legs, form a through hole with a diameter of up to 5 cm in one of the supporting structures. Grooves are made in the upper part of the tabletop through which the wiring runs. In addition, a corner hole is cut out, which is responsible for fixing the tabletop.

The height of the hole should correspond to the height of the tabletop. Its depth is calculated individually in each case. The main requirement is to ensure reliable fixation of the tabletop. Such grooves are made in each of the legs.

Arrangement of fastening

To design a table with an infinity effect with your own hands, you also need a horizontal plane on which to place the tabletop. This can be a wooden square 8-10 cm larger than the main structure. This free space wooden frame and is used for the location and routing of wires and additional equipment ensuring the smooth functioning of the system.

Holes are formed in the corners of the tabletop into which the legs are subsequently screwed or inserted. After supporting structure assembled, attach the outer frame to finished design attach the table top. Wires are placed inside and lead out through one of the structural elements.

Having finished assembling, open space between the compartment with the wires is closed, fixing the tabletop from the inside of the base.

How to calculate the width of an additional mount for a table top?

For fastening from above, a special frame is made, the width of which is calculated as follows: the thickness of the outer frame is added to the width of the cut gutter with a couple of centimeters in reserve, which helps fix the tabletop using the frame.

The frame is assembled from four wooden blanks and fastened with self-tapping screws. Then, using bolts, they are screwed to the outer frame, capturing the tabletop frame with LEDs. Remember that the holes are drilled in advance to prevent splitting. tree species in progress.

Having in hand the basic instructions for a table with an infinity effect, making such a design with your own hands will not be difficult. A beginner will have to work harder, but the result will exceed all expectations.