How to make a propeller to scare away moles. Several simple ways to make a mole repeller with your own hands. Waste material goes to work

05.04.2020

How to make a mole repeller from a plastic bottle

A plastic bottle, let's call it one and a half, is a universal item in the garden.

It makes an indispensable weapon against moles.

Option #1

Basic items needed to make a windmill:

powerful scissors;
plastic bottle 1.5 l;
marker;
stationery knife;
sharp awl;
self-tapping screw;
metal plates (washers) with a hole in the center;
stick.

The manufacturing process includes several stages:

Use a marker to make a mark on the bottom of the bottle. To do this, draw a strip along the bottom edge, which is located just above the bottom;
Using a knife, we cut off the curved bottom of the bottle along the rim;
In order for the spinner to rotate clockwise, you need to correctly mark the bottom of the bottle. To do this, use a marker to make the first line, which starts from the center of the bottom and then continues along the center of one of the convex parts. The next line is from the center along the concave part of the bottom. And so on we mark the entire lower part of the one and a half sheets;
Using sharp scissors, cut out unnecessary elements. It should look like a propeller, that is, if you cut out the first element, then cut it one after another;
When cutting “through one”, 5 elements should be removed;
In the resulting propeller, make a hole in the center with an awl. To do this, heat the awl;
Put a homemade washer on the self-tapping screw and insert it from inside the propeller. Next, put three of the same washers back on the self-tapping screw;
We take the remaining part from the one and a half rack. Make a hole in the cork with an awl. We screw a self-tapping screw into this hole. Finally, you will attach the propeller to the bottle. We do not screw in the screw all the way. This is necessary so that the plates rotate freely;
Place the windmill on a support (stick);
Make two holes in the neck and insert a nail into them. Using the sharp part, hammer the nail into the cut of the stick.

The principle of operation is simple, the wind hitting the blades of the turntable moves it, and the largest part itself rotates around the nail. The washers, due to the free attachment of the propeller to the one and a half, create noise, thereby scaring off moles.

Option No. 2

To make a homemade product, you will need a half-length, a stick, and scissors.

We make wide cuts in the walls of one and a half sheets, and cut them from top to bottom;
From the resulting slots you need to make smaller ones perpendicular to the main one. One above and one below;
We bend the resulting elements in different directions. The blades are obtained;
We make a hole in the bottom of the bottle through which we put the resulting structure on a stick.

When wind hits the blades, the repeller begins to rotate and create sounds that moles do not like. These devices can be placed near the mole's hole.

Advice! If you get creative and catch an animal, then remember that they bite very painfully. Therefore, you need to protect yourself and wear thick gloves.

Option #3

All the items needed to make the structure will be the same; in addition, you will need a plate cut from the wide part of another one and a half sheet.

We make 15 cm long slits in the bottle;
Cut blades of approximately the same size from additional plastic;
Insert the resulting blades into the slots to form a propeller;
Make holes in the cork and bottom into which a metal rod is inserted and attached to the support.

Free rotation creates rustling noises and vibrations that frighten the mole, after which it moves to another safe place.

Option No. 4

Place sticks along the perimeter of the summer cottage. Moreover, in one place, nearby, you need to place several sticks on which empty one-and-a-half sticks are put on.

When the wind blows, the plastic will hit each other, creating sounds that prevent the pest from approaching.

Repeller efficiency

The mole is a blind animal. He sees nothing in the light that cannot be said about the darkness. Therefore, the mole’s hearing and sense of smell are very well developed. All homemade repellers are based on the formation of some kind of mechanical action and ultrasound.

Extraneous sounds: rustling, rustling, creaking, knocking, whistling, rumble;
Vibration, movement.

When a plastic object spins in the wind, it sends vibrations down the stick into the ground. When crawling to the location of the repeller, the animals sense these vibrations of the ground, as well as unpleasant sounds, and remove themselves.

Conclusion

It must be remembered that moles live in families, which consist of several adults and younger ones. Many families can unite. The animals dig holes and passages several meters deep.

Moreover, each underground path has several exits, which makes it difficult to determine the main location of the family.

All of the repellers we have listed have been tested repeatedly by users and are also low-cost and troublesome, so buying a modern mole repeller is not a bad thing, but complement its availability at the dacha with a homemade “brother” made from a plastic bottle.

Gardens and vegetable gardens are a good help both in terms of food and in terms of relaxation for the soul. But everything that is grown on personal plots faces many dangers - beetles, larvae, birds, moles. And if chemicals help fight plant diseases or insect pests, then it is best to scare away birds and moles from the site, rather than destroy them. A primitive design will help with this - a windmill made from a plastic bottle, made with your own hands from scrap materials.

Waste material goes to work

Many, many different useful crafts can be made from so-called waste material. It’s also easy to get useful things for your garden plot and vegetable garden by applying your imagination and skillful hands to seemingly unnecessary things. Many different options for bird and mole repellers can be seen in various sources, some of them are quite complex, and some are primitive. It’s worth starting to create with the simplest designs. Plastic bottles, scraps of polyethylene pipes, a broken handle from a house mop, a used welding electrode, gift ribbons from already unwrapped gifts, toy bells or drink cans - anything can be used.

Design Basics

It is no coincidence that a device for scaring away birds or moles from a site has a very specific name “windmill”. The main force that makes the structure perform its function is the wind. The wind is blowing - the windmill is working. In order for such a repeller to work, it needs to catch air currents, which means it needs blades. If you set a goal, then making a windmill from plastic bottles with your own hands is quite simple. The most important part - the blades - is cut out of plastic. Moreover, the blades from the bottle will not need to be attached, because they are cut in place and simply bent. The remaining design elements will depend on the purpose of the windmill. Tools you will need for work:

stationery knife;
scissors;
universal glue;
hard wire;
beads with a hole for wire;
self-adhesive film or colored electrical tape.

What are birds afraid of?

Birds provide many benefits by eliminating pests. But when the harvest ripens, they are not averse to eating tasty, sweet fruits, pecking at cherries and spoiling apples, pears and plums. Making a windmill from a plastic bottle with your own hands is quite simple, if you remember that birds are afraid of moving objects. That is why turntables and scarecrows with fluttering sleeves have always helped gardeners and gardeners preserve their harvest.

How to scare away birds

A windmill made from a plastic bottle must be movable to scare away birds. The simplest and most budget option is a turntable. It does not require additional costly motors and batteries, because it runs on air movement. But it needs blades to catch the wind. You can make several options for such garden helpers. For example, like this.

Cut an ordinary plastic bottle in the center into four sections that can be bent without separating the parts from the whole.

Then, bending the blades so that they catch the wind, pieces of foil are glued onto them. You can use self-adhesive mirror film. It is also necessary to cut a hole in the bottom that is suitable in diameter. The finished windmill bottle is placed on the remainder of the plastic pipe or the handle of a mop. The bottle should rotate freely when the wind blows, but not dangle too much, otherwise rotation will not work. The remainder of the pipe should be long enough for the birds to see the pinwheel.

You can make a windmill from a plastic bottle with your own hands in this version - cut long blades from the base of the bottle, bend them at an angle of 45 0. The turntable diagram is shown below.

Such a windmill is mounted on a rigid base at right angles to the ground. You can secure it in any way - using a nut, if the base is threaded, using a large smooth bead, making a loop on the wire with pliers. There are many options; the master decides which one is more convenient to use. The most important thing is that the turntable rotates freely. Some craftsmen attach several of these devices to one base, decorating them with colored film or painting them with acrylic paints. The result is not only functionally useful, but also a beautiful thing for a personal plot.

What are moles afraid of?

A windmill made from a plastic bottle to repel moles is a very useful thing, because moles are also pests. They eat earthworms that loosen the soil and spoil the roots and tubers of plants. Sometimes a lot of such underground inhabitants appear on the site. You should get rid of uninvited guests - moles. Moles are practically blind; you can’t scare them with some kind of flicker. But moles have good hearing. It is on this feature that the principle of scaring these animals away from the garden is based. Making a windmill from a plastic bottle with your own hands means saving the harvest, leaving underground inhabitants alive, and not flooding your garden with chemical poison.

How to scare away moles

Moles are afraid of noise, and if you place something on the site that will make noise underground, the moles will leave it, going in search of a quieter habitat. A windmill made from a plastic bottle to repel moles, the diagram of which is proposed below, works just for this outcome. In order for sound to travel well in the ground, it must be amplified using resonance. This can be achieved using a hollow pipe dug into the ground. It will amplify the sound and transmit it across the earth.

The base of the turntable can be taken from the design proposed above - blades are cut out on the body of the bottle, and the windmill itself is placed on a metal base, for example, a used electrode. Sound will be transmitted better through metal than through plastic. Then the electrode, a metal rod, must be placed in the buried pipe so that the sound from the rotation of the windmill is amplified. A do-it-yourself windmill made from a plastic bottle to preserve the harvest is a very simple design.

Pinwheel beauty

Many of those who maintain a garden or vegetable garden try to decorate the area using available materials, the same plastic bottles, for example. What craftsmen can come up with from this waste material. For example, by placing a windmill made of plastic bottles above a flowerbed, you can make it much more interesting. The classic turntable is made of 4 blades according to this scheme.

The blades can be cut out from colorful bottles, then assembled in the center using a bolt and nut or a stapler. You can decorate transparent plastic with self-adhesive film or paint it with acrylic. You can make more than 4 blades. In any case, such a classic windmill made from a plastic bottle, made by yourself, will be an interesting addition to the flower garden.

There are very simple designs of pendant windmills. You can make an interesting decoration from a small plastic bottle - cut the bottle lengthwise in the middle into thin strips 1 centimeter wide. Then connect the upper and lower parts to form a “flashlight”: press the blades in the middle, folding them in half, but at the edges they should be bent at an angle of 45 0. Make a hole in the cork using a hot nail and insert a looped paper clip into it. You can hang a bell or shiny beads on it. The windmill pendant is ready and can be placed on a tree branch.

It’s not difficult to make a windmill from a plastic bottle with your own hands, but it will provide a lot of benefits and beauty.

It is one of the noise repellents for moles.

DIY spinner made from plastic bottles

We make a pinwheel against moles. To make it, we will use the most available materials that are likely to be found on everyone’s household.

The first step is to prepare the rotation axis. In my case, I used an old welding electrode. It is not suitable for welding work, but it is very convenient to use it for our purposes.

Step one. Removing the coating

To remove the coating from the electrode, it is enough to give it a few light blows with a hammer. The coating will crack and chip. You can remove cracked coating with your hands or pliers.

Step two. Hole in the lid.

I used a cordless drill to make a hole in the lid. But it is not at all difficult to do with the help of an ordinary knife with a sharp end. The diameter of the hole should be such that our previously prepared axle easily passes through it, but does not dangle.

Step three: hole in the bottom.

In the same way, using a drill or knife, we make a hole in the bottom of the bottle. The hole diameter is the same.

Step four. We focus

The remaining electrode coating does not bother us. But as the bottle rotates, if the cap rubs against the remaining layer, its rotation will slow down greatly. Therefore, we will make a ring of copper wire around our axis. It will prevent the bottle from falling lower and will make it easier to rotate.

Step five. Bottle marking

Using a felt-tip pen or marker, divide the surface of the bottle into an even number of sectors. For a spinner with three blades, divide it into six sectors; if you want to make a spinner with four blades, then divide it into eight sectors.

Step six. cut out the blades.

Using a sharp knife or scissors, cut out the marked sectors according to the markings. As you can see from the photo, a stationery knife is well suited for this purpose.

Having made the U-shaped cuts, we begin to bend the blades. After we complete this step, our pinwheel will look like this.

Now all we have to do is assemble the turntable by threading the axle through the holes in the lid and bottom.

The finished pinwheel, assembled and stuck into the ground, looks like this.

And now a small breeze is enough for the bottle to start rotating. When rotating, the vibration from the oscillations of the bottle is transmitted to the ground and the moles begin to feel not very comfortable. And as a result, they leave the area that has become uncomfortable for them.

This is how the master class on making a mole repellent turntable turned out.

Wildlife lovers who do not want to destroy ecosystems also suffer from underground diggers -. But what to do if you don’t want to kill an animal, but there is no time to evict the “guest” 101 kilometers away? You can try to scare moles away from your area instead. They are easy to purchase in a store, but many summer residents prefer to make them with their own hands.

Homemade repellers

What you can use to make a mole repeller with your own hands:

plastic bottles;
cans;
electric alarm clocks;
radio and speakers.

The first three types of repellers do not require any special knowledge or skills. The maximum number of different repellers has been invented from plastic bottles.

Options from plastic bottles

The simplest version of a homemade repeller is a bottle placed on a pin. Also suitable for empty beer cans. The pin must be stuck into the ground so that sound and vibration are transmitted to the wormholes.

On a note!
Iron transmits sound better than wood.

The most difficult option is a windmill against moles. To make it you will need a one and a half liter beer bottle.

The bottle must be of a “classic” beer shape. That is, with a narrow elongated neck.

In addition to the bottle, you need good scissors, a marker, a self-tapping screw with threads that do not reach the head, a nail, an awl and a windmill stick. Given the maximum complexity of creating such a mole repeller from a plastic bottle, there are no visual diagrams or drawings. There is only an extremely clear video.

The bottom of the bottle is cut off along the horizontal line that is found on all plastic bottles.
The cut bottom is turned over with the bottom up. The bottom has the shape of a five-rayed star. Using a marker, mark the areas that need to be cut out: from the border of the central circle strictly in the middle of the “ray” and from the middle of the central circle along the hollow between the “rays”. This part needs to be cut off. It turns out that half of the “beam” is cut out.
The operation is repeated on all “rays”. The propeller is ready. All that remains is to punch a hole strictly in the center of the circle. The hole should have perfectly smooth edges and a diameter larger than the provided screw.
Insert a self-tapping screw with the head “inward” into the resulting propeller and screw it into the center of the bottle cap until the thread runs out. To make screwing easier, you first need to make a small hole in the cap. On the inside of the cover, the self-tapping screw can be secured with a nut for reliability.
Make two holes for a nail at the bottom of the bottle neck, strictly along the center line. The holes must be strictly opposite each other.
Take an almost finished windmill and secure it to a wooden pole. Stick the pole into the ground in the garden.

When there is wind, the propeller makes a rather nasty noise, which moles are afraid of. The advantage of a windmill is that it will work in any wind direction. In fact, this is an ordinary weather vane.

MOLE REPEALER WITH YOUR OWN HANDS FROM A PLASTIC BOTTLE Let's make a simple mole repeller! A simple plastic bottle will help us here. The thing is also very multifunctional, from which craftsmen make a lot of useful things. Everything is very simple and no abstruse drawings or operations are required. We just take the bottle and cut it out, and then bend the blade pockets. Next, from below, in the bottom, we make the hole we need. And we put the bottle on a tube (diameter about 1 cm) or on a thick steel wire (or something similar). At the slightest wind, such a bottle with blades spins very well on the tube, and this creates noise, which also resonates into the tube (therefore, the tube is preferable in this case). And this noise, through the tube, goes into the ground, that is, into mole tunnels. Such a tube with a bottle should be inserted into underground voids, next to a fresh molehill. To further enhance the effectiveness of this technique, you can further improve the design of such a homemade pinwheel device made from a plastic bottle. For this we will already need a water supply, metal pipe. The diameter of this pipe can be 1/2 mm or 3/4 mm, there is not much difference. We hammer this tube deeper, that is, so that the lower part (that is, the end of this tube) is slightly deeper than the level of the mole’s underground passages. Next, we insert a suitable metal pin into this tube (the part at the top). And so that this pin does not dangle in the tube, it will need to be strengthened in the center with a wooden stopper. Then we also put a plastic bottle on the pin, having previously made a hole in its bottom using a hot awl or a nail. The diameter of such a hole should be slightly larger than the diameter of the pin itself. More useful information on our website http://vsadu.ru We also make blade pockets on the bottle, which we bend outward. That's it, the repeller is ready. When the wind blows, the bottle will rotate, and the hollow pipe will again resonate this unpleasant sound. This creates noise, which moles are very afraid of; they simply cannot stand this constant and very unpleasant noise for them and will leave your area. You can create the same effect if you stretch your used tape from a video or tape cassette onto small pegs made of any material (25-30 centimeters). When it vibrates, it also creates an unpleasant, slightly whistling sound. Such a sound is also good at scaring away these mole rats. In addition to moles, birds, such as sparrows, for example, are also afraid of such a device.