How to make a New Year's snow globe from a jar? How to make a snow globe DIY snow globe from a jar

Instructions for making a snow globe.

For the New Year holidays, many strive to make the best gifts for their loved ones. If you don't have a lot of money, but have enough free time at your disposal, you can make New Year's balls with snow. Such products will complement the interior and will remind you of you all the time, as well as lift the mood of the owner of the ball. At the same time, making such products is quite simple.

How to make a snow globe yourself from a jar with and without glycerin, with water: instructions, design ideas, photos

In order to make a ball, you will need an empty jar, preferably a beautiful one with a screw-on lid, some New Year's tinsel, glitter for the body, and also some kind of figurine. This could be a Kinder Surprise figurine or a small souvenir ceramic figurine that is purchased at a souvenir shop.

Instructions:

• In order to make such a ball, you need to paint the screw cap with some kind of gold or silver paint.
• The inner surface also needs to be painted. Next, apply a little glue to the figure and attach it to the lid. After the figure is securely attached to the lid, you need to fill the jar one third with glycerin and add water.
• This means that it must be distilled or purified. You can also use boiled or chilled water. Pour water almost to the top, then chop the tinsel and pour it along with the glitter into a jar of water and glycerin.
• Lubricate the neck of the jar with glue. Screw the cap tightly. If you wish, you can decorate it with polymer clay modeling. In exactly the same way, you can make figures that you can place inside the jar.

You can make such a cute ball without using glycerin, although you can buy it at the pharmacy for just a few rubles. Instead of glycerin, you can use purified sunflower oil. It is desirable that the oil be refined and have almost no yellow tint. This way you will achieve a perfectly beautiful, clean shimmer of sparkles. There should also be about 2 times less oil than water.

snow globe from a jar of glycerin

snow globe from a jar of glycerin snow globe from a jar of glycerin

How to buy a blank for a snow globe on Aliexpress: links to the catalog

Of course, it can be very difficult to find a suitable jar at home. The most ideal option would be baby food jars or canned food. Baby purees are sold in these jars. They are small in size and have quite an interesting shape. There are round jars with a flat bottom, they look very organic and pretty. Please note that craft kits can be purchased at AliExpress. The best ones are sold here various banks , as well as artificial snow, glitter and small figures to create snow globes.

snow globe from a jar of glycerin

snow globe from a jar of glycerin

How to make a New Year's glass transparent ball with snow and a photo: ideas, photos

A New Year's snow ball with a photo will be an excellent memorable gift. This will take a little effort. The ideal option would be all series of photographs on one strip. It is necessary that the length of the photograph is slightly less than the circumference of the jar.

Instructions:

• You need to roll the photo into a tube and glue it together with a thin strip of tape to make a cylinder or tube.
• After this, you need to laminate or tape the surface of the photo. This will prevent it from getting wet in the water.
• Next, apply a little glue to the ribs and glue them to the lid. It also needs to be pre-painted. Start gluing the photo.
• After this, pour glycerin into a jar, add glitter and crushed tinsel to the water. Apply glue to the neck and screw the jar tightly. Let the glue dry. You can admire your creation.

glass transparent ball with snow and photo

How to make a New Year's glass transparent ball with snow, sparkles and figures: ideas, photos

You can make any cute ball. To do this you will need all the same tools and items. This is glycerin, jewelry, and also figurines. Most often, such figurines are purchased in souvenir shops. You can also use small figures from Kinder surprises. Jewelry that you can make yourself from polymer clay is also suitable. Keep in mind that such products should be painted not with acrylic paint, but with some kind of oil paint.

Because under the influence of glycerin, the paint can dissolve and then your liquid will become colored. If desired, you can paint the liquid in some color. To do this, use some food coloring. If you want to make blue, then blue will suit you; for pink, use a few drops of fucorcin. If you want to make green water, add a drop of greenery.

Such balls look very unusual if a New Year's landscape with Christmas trees and snowmen is used. Such products are complemented with tinsel, body glitter or small rhinestones. You can also use crushed polystyrene foam as snow.

New Year's glass transparent ball with snow

New Year's glass transparent ball with snow

The best DIY snow globes: photos

Below are the most interesting options for snow balls. As you can see, making New Year's snow balls is quite simple. You will need half an hour of time, cute figures and a beautiful jar. If you don’t have them in stock, you can purchase everything you need in craft stores or on AliExpress. Such products are extremely popular. If desired, you can supplement them with sprigs of dry grass or flowers.

VIDEO: Snow balls

Irina Pogorelova

Snowball, your gift for Christmas time,

I take it from the treasured box.

I remember Christmas, carols.

Shaking the ball, I look at the game

snow-white fluttering crumbs,

that they fly, descending on the house. (Institutes." Snowball")

Magic is always present in our lives, you just need to believe in it. Take at least New Year's snowball, filled with liquid, shaking which you can watch for a while as they dance merrily inside it snowflakes, Is not it magic!

The first glass ball was small, about the size of a palm, and inside it was a miniature copy of the Eiffel Tower. The base was ceramic, the ball was filled with water, and the role snowflakes performed by crumbled porcelain and sifted sand. Soon the fashion for this winter souvenir spread throughout Europe.

It's interesting that snowy balls have a large number of different names, For example: snow globes, snow spheres, snow domes, snow scenes, water balloons, raging snowstorms, snow shakers, shake-it-a-miracle and so on. Such a ball can make it yourself, from a simple jar with a screw cap.

For creating magicalthe ball needs to be prepared:

A jar with a screw-on lid, it is better to choose a small container. I have a plastic cream jar;

A plastic figurine or even several tiny plastic figurines;

Glue gun or waterproof glue;

Artificial snow and several shades of glitter (you can use nail glitter);

Snowflakes;

Glycerol (sold in pharmacies, inexpensive);

Clean, filtered water.

How to do snowball:

1. Remove the lid from the jar and glue the figures onto the inside of the jar with a glue gun. To make the composition inside the jar look impressive, You can use many different small items: houses, Christmas trees, benches, bushes, etc. This item will depend on your imagination. I used a Santa Claus figurine, a small Christmas tree and a bunny.

2. Pour water into a clean jar and add glycerin here. (I poured out 2 bottles). The more glycerin you add, the smoother they will spin. snowflakes and sparkles. Mix glycerin and water well.

3. Pour the prepared glitter into the jar here, do not add too much, everything should be in moderation, first add half a teaspoon of each shade of prepared glitter to the water, then you can add more if you think that this is not enough. I have silver, green and red glitter. Instead of glitter, you can add artificial snow to the water.

4. Close the jar with a lid with a figure glued to prevent water from leaking during use. First you need to treat the inside of the lid with glue. Decorated the top of the jar snowflake.

The snow globe is ready, shake it and enjoy the snowfall raging inside it.

Process of creation snowy the ball is absolutely not complicated, and the result is impressive. Dancing inside it snowflakes calm down, plunging into bright thoughts and dreams. In addition, children should like this ball, try it make it with your kids, they will definitely be delighted.

With daily worries, we stop enjoying little things and believing in magic. Take pleasure in trifles. We lose our childish admiration for the world around us. And New Year and Christmas give us this feeling. gives it back to us. Thank you for your attention!

Happy New Year and Merry Christmas to everyone. Let everything in the new year begin with joy and happiness, kindness and a smile. May the coming bright holiday of Christmas bring love and tenderness, good luck and comfort to your home.

Publications on the topic:

I would like to present a master class on making an unusual, beautiful flower ball. Kusudama is a paper model that is usually formed.

Master class on the topic: how to make a ball from plastic bottles. Balls from plastic bottles can be used as decorations.

New Year's ball craft for my son in kindergarten. The long-awaited time has come, the time of anticipation for the most important holiday of the year. Everyone has it.

To make it you will need: - A round base for a ball (in our case it’s an old globe); - Plastic disposable spoons (for ours.

Goal: to develop hand movements, differentiated movements of the fingers. Required: plastic ball, multi-colored and green yarn, orange.

Snowball- one of the most popular Christmas souvenirs around the world. Inside the glass toy there are usually some figures - snowmen, small Christmas trees, elegant houses or other traditional characters. As soon as you shake this simple composition, a fairy tale comes to life: artificial snow or sparkles slowly swirl and gradually settle. You can easily make such an interesting craft and a memorable gift with your own hands and at home.

How to make a snow globe?

To snowball It was bright, add sparkles, but not too small. If you are not sure about the quality of the sparkles, which may contain gold dust instead of small grains, then you can use regular tinsel, which is finely cut with ordinary scissors. You can also use artificial snow or beads.

You will also need:

• figurine (any suitable size and that does not dissolve in water, you can even a laminated photograph or picture),
• a beautiful jar with a well-closing lid (I used a half-liter one, but you can even use baby food jars, the main thing is to find a figurine that is the right size),
• universal glue moment,
• liquid glycerin at least 1/3 of the volume of the jar (the amount also depends on how slowly you want the “snow” to fall; the more glycerin, the slower. The main thing is not to overdo it, otherwise the “snow” will hang in the air all the time ),
• water (either filtered, boiled, or distilled. If you take plain tap water, your snow globe will become cloudy over time),
• glue gun

If you are decorating a jar or making a decorative stand, like me, additionally prepare:

• satin ribbons, decorative twigs, flowers, etc. for decorating a jar,
• cardboard (but not hard),
• scotch,
• scissors,
• self-adhesive film – gold,
• PVA glue,
• dry glitter - gold,
• thin brush,
• Well, and, already listed, a hot glue gun.

So let's get started!

Wash the jar, lid, figurine and all additional decorations well so that the water does not become cloudy over time. I treated everything with boiling water, as for preservation.

We attach all the decorative elements to the lid using hot glue.

I have already used tinsel, sparkles and beads to imitate snow.

I'll tell you how to make a snow globe with sparkles, as there are some subtleties here. There are no such problems with tinsel and beads.

We take a clean jar, in my case a half-liter, and fill it with 150-250 ml of glycerin.

Fill the rest with water (we don’t fill the jar to the brim, because we still have a figure that will fit in there, which will displace a certain amount of water).

Add glitter and mix with a clean spoon.

Even if the glitter is large, there are particles that did not settle to the bottom of the jar. We must definitely collect them, otherwise they will subsequently always float on top, and this, frankly speaking, does not look very good. This can be done with a small spoon or the tip of a clean waffle towel.

Now, very carefully, preferably over a plate, we immerse our composition in the jar, twist it a little so that there are no air bubbles anywhere. Screw the lid tightly. You need to try to close it so that there are no air bubbles left in the jar. Since we didn’t glue the lid inside, it can be remade if necessary.

When the lid is screwed on, for insurance, you can go over the joint from above with universal glue (if you have it, it can be waterproof). There have never been any problems with such jars, so the glue, in principle, only serves to secure the lid so that no one accidentally opens it.

Our snow globe is ready! Let's decorate it a little to hide all traces of the lid and jar.

You can make a durable stand from several strips of cardboard and cover it with gold self-adhesive film. The diameter is equal to the diameter of the cap. We decorate with all kinds of ribbons, twigs, it all depends on your desire and imagination!

I added a little sparkle curls and used them to hide the carvings on the bottom of the jar and all sorts of unnecessary numbers. To do this, dilute 1:1 water and PVA glue, generously add dry glitter to this mixture. I painted the curls with a regular thin brush.

And here's what I got!

And with flying sparkles...

This magical gift is sure to please both children and adults. Everyone will be mesmerized by the magic hidden behind the glass. Give each other joy and these wonderful snow globes, made with your own hands, in which a piece of your soul and warmth is embedded!

I was glad to help!

New Year is a very bright and fabulous holiday. On this day, it is customary to give gifts to everyone and most of us are used to buying them in stores. But how much more pleasant it is to receive original gifts from loved ones that they made with their own hands. Gifts given by children and made by them personally are especially appreciated.

An original gift for the New Year could be souvenir - snow globe. It will look especially fabulous under a fluffy Christmas tree. And making an artificial Christmas tree more fluffy is very simple, knowing a few simple techniques, which you can read about in the article How to fluff an artificial Christmas tree.

Even a child can make such a souvenir, and it looks very dignified and symbolic. This gift can be given to a person of any age. And with a little imagination, you can even do something unique. Instead of figurines, you can immerse a laminated photo or other small meaningful object inside the jar. If it breaks down in water, coat it with a water-repellent varnish.

How to make a New Year's snow globe?

Everything is very simple.

To create it we will need:

A nice little jar with a tight-fitting lid.

Items you want to put in the jar.

Artificial snow, which you can also make with your own hands (read about this process in this article).

White paraffin candle.

Waterproof or silicone glue.

Distilled or boiled water.

Glycerol.

First of all, we prepare the scene that will be inside the jar. To do this, we place and glue all the objects onto the inside of the lid with silicone glue. If the figures need to be immersed in snowdrifts, apply glue to the lid and sprinkle with artificial snow. You can replace it with a white paraffin candle. To do this, cool the candle in the refrigerator and rub it on a fine grater, then sprinkle it onto the glue in a thick layer and press it firmly. This way you can make the required number of layers and get the intended result. And if the paraffin is heated to a soft state, then you can immediately make the necessary snowdrifts, cool them and glue them to the inside of the lid along with other objects.

Silicone glue dries long enough so that DIY snow globe, it turned out to be of high quality and durable, you should be patient and allow the glue to dry completely.

Fig.1 Figurine for a snow globe

While our composition is drying, we prepare the jar for snow globe. We wipe it with alcohol. This is done so that the water does not become cloudy over time, but remains clear. Then in a separate container we dilute warm water and glycerin. The more glycerin, the thicker the solution will be and the slower the snowflakes will fall. If you want snowflakes to fall very slowly, use glycerin without water. Pour the resulting mixture into the jar, but not to the brim. It should be taken into account that the composition on the lid will also need space in the jar and excess liquid will flow over the edges.

Fig.2 Preparing the solution for the snow globe

After glycerin and water have been poured into the jar, add artificial snow and glitter into it. Try throwing a few snowflakes at first and see how they fall to the bottom. If they fall too slowly, add a little water. If too fast, add glycerin.

Artificial snow for a snow globe can be replaced with white sand or finely grated paraffin. Glitter can be purchased at the “Everything for Nails” or “Everything for Creativity” store. White sand is sold at pet stores, in the fish section.

Try not to add too much glitter or snow, as the water may appear cloudy when flipping and the snow globe will be ruined.

Fig.3 Add glitter for the snow globe

Once the glitter and fake snow are added to the jar, the big moment comes. You need to check that all the figures are well glued to the lid and only then immerse them in the solution. Excess liquid will begin to spill over the edges, so we advise you to substitute a saucer. If after you have lowered the lid with the figures into the solution, there is still free space in the jar, add more solution. It is better do it yourself with your own hands syringe. Now that everything is ready, carefully wipe the excess liquid from the threads of the jar and apply glue to it. Then screw the lid tightly. Do not immediately turn the container over. Wait for the glue to dry under the lid.

When everything is dry, you can see what happened. If there are any air bubbles left in the jar, try removing them with a syringe. You can also add liquid with a syringe if there is not enough liquid.

If water leaks from under the lid, you need to turn the jar over, wipe it dry and coat it again with glue, then let it dry.

Fig.4 Finished craft - snow globe

Your snowball Almost ready, all that remains is to decorate the lid beautifully. To do this, you can use multi-colored foil, openwork ribbons or beads. You can also cover the lid with polymer clay and paint it with acrylic paints. This will be the final part of the work.

Now you know, how to make a snow globe at home. It is absolutely not difficult, and the gift turns out to be very original and unique. While creating such gifts, you can also try making a New Year's wreath with your own hands (about this process). By decorating your home with it, you will create a unique New Year's atmosphere.

You can admire beautiful snow globes for a long time: shake the ball and admire how the white flakes fall, slowly swirling.

The first “snow globes” appeared in France in the 19th century, then they came to Great Britain, and in America they became popular in the 20s of the last century. Since that time, it has been one of the most common gifts for the New Year and Christmas.

What is a snow globe made of?

Initially, the balls were made of crystal and placed on a ceramic stand. The balls were filled with water, and the “snow” was made of sand or porcelain chips. Then the souvenir ball began to be made of glass, which gradually became thinner and thinner, and plastic replaced sand and porcelain.

There are not many factories in the world making real snow globes, so original toys become the subject of collections. The largest one was collected by a resident of Nuremberg; it contains about 8,000 copies.

At New Year's fairs you can find various types and sizes of snow globes, and not everyone realizes that you can make an original souvenir yourself at home.

Perhaps it will be much simpler than store-bought: finding miniature objects that would fit in a small jar is not easy, but it will have no less effect.

What can you make a ball from at home:

• from a small jar with a tight-fitting lid;
• from an old light bulb.

Attention! The light bulb is made of thin glass, so the work requires caution, it is better not to trust it to a child.

In addition to the jar, you will need:

• artificial snow or sparkles;
• small New Year-themed toys that easily fit in a jar;
• distilled water;
• glycerin (like water, you can buy it at any pharmacy);
• glue "Moment".

It is convenient to use foam plastic for the stand, cutting out a bed for a snow globe in it. When all the materials are ready, you can start working. We offer detailed instructions on how to make a “snow globe” correctly.

How to make a snow globe with your own hands

First you need to thoroughly wash the jar and lid. Degrease the inside of the lid and glue the ball elements - toys - to it. What it will be: a miniature Christmas tree, Santa Claus or little animals - symbols of the year made of plastic - choose for yourself. It is only important that after placing them in the jar there is still room for the snow flakes.

Fill the jar itself with water and add glycerin to it. The consistency should be like liquid dough: this way the “snow” flakes will fall and swirl slowly.

Add artificial snow or glitter, carefully lower the lid, coat it with glue, screw it on, and press it. Check for water leaks.

Important! Instead of water and glycerin, you can use Johnson & Johnson baby oil for massage.

Instead of Moment glue, you can use epoxy; it holds the toy parts together more firmly. Artificial snow can also be replaced with grated paraffin, coconut shavings or small pieces of foam.

The second master class on snow globes for beginners describes the process of creating a New Year's souvenir from an old light bulb. First you need to remove all the insides from the light bulb. They are fragile, and it will not be difficult to remove them, the only important thing is not to break the glass itself.

Then prepare a standard solution of distilled water and glycerin in a 7:3 ratio. Why can't you use plain water? Sooner or later it will go rotten or “bloom.” Pour the solution and glitter into the light bulb. It has a narrow neck, so you won't be able to fit a large toy in there.

As an option, you can carefully cut the neck using an engraver and an attachment with a diamond-coated cutting wheel, then glue a round dome with decor and sparkles inside onto the stand.

Another option is to apply the design to the glass. You can cover the hole with the lid of the medicine bottle. It must be filled with epoxy glue, and it is convenient to use an insert from a perfume box of the appropriate size as a stand. The “snow globe” needs to be glued into it, you can add additional decor.

Various photos of the “snow globe” can be seen on the Internet. Having learned how to make it yourself, you can easily create an original souvenir for the New Year holidays as a gift to loved ones.

Photos of snow globes