How to make slime at home Yandex. From soap and shampoo. From soap or detergent

Let's talk about everyone's favorite toy - slime! A toy with such an unattractive name is a sticky-wet, jelly-like mass bright color and odorless. Slime does not mold like plasticine, although it has a certain plasticity, but it sticks well to surfaces, slowly sliding off them. This ability and its pleasant-to-touch texture have made this seemingly unremarkable mass one of the most famous inventions in the gaming industry.

The history of handgam

The ancestor of the substance known in the countries former USSR called “lizun”, was an acid green slime toy produced by the Slime company.

The name "slime" stuck to slime after the release of the film "Ghostbusters" on television. The ghost after whom this jelly-like toy was named had a similar shape.

The beneficial effect of handgam on the development of a child

Another name for this sensational sticky plasticine is handgam, which translated means “hand” and “chewing gum.”

Scientists who have studied handgam claim that playing with it has a beneficial effect on development fine motor skills hands and can serve as a relaxing massage.

So, how can you please your child with such a wonderful toy that develops imagination and motor skills? Of course, you can go and buy it at almost any store, but it’s safer and more interesting to make it yourself.

How to make slime at home without or with it with your own hands will be discussed in our article.

Safety rules for making handgams

Before you learn about sodium tetraborate, let's familiarize ourselves with the basic safety rules, since failure to comply with them can be fraught with serious health problems:

Wear an apron (or clothes you don't mind) and gloves, as you will be using dyes during the work.

If you are making “smart” plasticine together with a child, be careful that glue and borax do not get into his stomach. If these ingredients are ingested, rinse and consult a doctor.

For the mixture of ingredients, use a container from which you will not eat food after the process is complete.

The shelf life of homemade slime can be from a week to two weeks, depending on the ingredients included in its composition.

After playing, be sure to wash your hands thoroughly.

How to make such a toy with your own hands at home? Slime without sodium tetraborate or with it is made in approximately the same way, as will be described below in the article. Safety precautions are the same for all methods.

Making “smart” plasticine from sodium tetraborate

There are many ways to make handgam yourself, today we will look at the most common of them.

Sodium tetraborate slime is considered the most durable. To increase its shelf life, strictly follow the manufacturing technology and choose the highest quality materials.

By the way, tetraborate itself is an antiseptic, so if a child drops a slime that contains this substance, you don’t have to worry.

You can buy borax solution at pharmacies, hardware stores, craft stores, and even at the construction market.

There are two ways to create handgam from sodium tetraborate - with water and without water. In the first case, your slime will turn out a little transparent, in the second - more matte.

Method without using water

Materials and ingredients you will need:

PVA glue - 1 bottle.

Wooden stick.

Cooking method:

Pour glue into the container (all or only part, depending on how many and what size slimes you want to get).

Constantly stirring the glue wooden stick, add borax solution 1 drop at a time until the mixture reaches the desired consistency.

Add a couple of drops of gouache or and mix thoroughly with your hands wearing rubber gloves.

Sodium tetraborate slime made according to this recipe can be washed with water if necessary.

Method using water

Materials you will need to make a toy like Slime from sodium tetraborate:

A glass of cold water.

PVA glue - 1 bottle.

Sodium tetraborate (aka borax solution), it is better if it is a solution in glycerin - a few drops.

Food coloring or gouache.

The container in which you will mix everything.

Wooden stick.

Cooking method:

Mix glue and water in a container at a ratio of 1:1.

Pour in a lot of dye.

Mix everything thoroughly.

Add two drops of borax solution and mix until smooth.

If the mass turns out to be too liquid, then add a little more sodium tetraborate.

Sodium tetraborate slime is stored in the refrigerator in airtight packaging. When your homemade “smart” plasticine hardens, add a little water to it.

If you want to get a transparent slime, replace the PVA glue in this recipe with clear stationery glue.

Slime, which contains glue and starch

If you consider a toy that contains sodium tetraborate to be unsafe and unsuitable for playing with a child, or you were unable to buy a borax solution, then your option is homemade slime without sodium tetraborate.

Materials required to make handgam:

Liquid starch for washing clothes (if you do not find starch in liquid form, dilute it yourself in a ratio of 1:3).

Food coloring or gouache.

Dense file.

Cooking method:

Pour 85 ml of liquid starch into a clean, dry file.

Add a little gouache or a couple of drops of food coloring to the starch.

Pour 30 ml of PVA glue into the resulting mixture.

Mash the mixture in the file with your hands, mixing it thoroughly.

After most of the composition has turned into a thick, slippery clot and some liquid remains at the bottom of the bag, remove the slime from the bag and remove excess moisture from it with paper or a cloth.

Lizun is ready.

If you see that the slime is too sticky or not at all plastic, it means you have calculated the proportions incorrectly (in the first case there is too much glue, in the second there is too much starch).

Remember that in addition to harmless starch, such a toy contains glue, so make sure that the child does not put it in his mouth.

It is important to know not only how to make slime without sodium tetraborate, but also how and how long to store it later: store it in a closed container at room temperature for no more than a week.

Slime made from baking soda and detergent

There are a huge number of ways to create “smart” plasticine, similar in its properties to the world famous toy slime.

If your goal is a slime without sodium tetraborate and glue, then we have a couple more options, here is one of them.

Materials and tools you need:

Dishwashing liquid (like Fairy).

Baking soda.

Food coloring or gouache.

Wooden stick (a sushi stick works great).

Cooking method:

Pour 150 ml into container detergent.

Add 1 tbsp. l. soda

Mix the ingredients thoroughly.

Add as much water to the resulting mixture as needed to ensure that the resulting consistency suits you.

Add a few drops of dye (this step is optional, because often the dishwashing liquid already has a fairly bright color that is transferred to the slime).

Slime without PVA glue and sodium tetraborate is ready. Store it in the refrigerator.

Slime with the longest shelf life

As you have probably already noticed, all of the homemade slimes described above have a fairly short shelf life (no more than 2 weeks), this is due to the fact that they contain almost no preservatives or substances that will protect them from drying out.

If you want to make handgam with a longer shelf life, then we have such a recipe. The lifespan of “smart” plasticine, the manufacturing method of which we will now describe, is from 1 to 2 months.

By the way, for this recipe you will need very few ingredients, and you almost certainly have them at home:

Transparent bright color without granules.

Transparent shampoo with bright colors.

Mixing container.

Wooden stick.

Cooking method:

Pour 150 ml of shampoo into a container.

Add 150 ml of shower gel to the shampoo.

Mix the ingredients thoroughly and carefully, making sure no foam forms.

Place the container with the future slime in the refrigerator for a day.

This slime must be stored in the refrigerator, otherwise it will simply melt. As in all other cases, make sure that your child does not taste the handgam and wash their hands thoroughly after playing with it.

The safest slime

If all the methods described above do not seem safe to you and do not inspire confidence in you, but you want to please your child, then we suggest you make a beautiful and interesting toy(slime) without sodium tetraborate and starch, without shampoo and dishwashing detergent, without glue and washing powder.

The shelf life of such a toy is not very long, and it differs noticeably from the original in appearance, but it is safe, and you can be sure that nothing will happen to your child, even if he puts handgam in his mouth.

So, here are the ingredients you will need to make safe “smart” plasticine:

Wheat flour.

Hot water.

Boiling water.

Container for mixing ingredients.

Fork or whisk.

Food coloring (you can even use beet juice or spinach juice, for example).

Cooking method:

Pour 4 cups of flour into a container prepared in advance, sifting it through a sieve.

Add half a glass of ice water to the flour.

Pour half a glass of boiling water there.

Mix everything as thoroughly as possible, the mixture should be smooth and without lumps.

Now it’s the dye’s turn: add a few drops to the mixture and mix everything again.

Place your future safe slime in the refrigerator for 3-4 hours.

The slime is ready, now you can rest assured about your child.

other methods

There are many more ways to make slime. Here are some of them: from washing powder, from a solution of borax and dry (but such handgam needs to be boiled), from plasticine and gelatin, magnetic, etc.

In this article, we tried to describe in as much detail and clearly as possible several completely different, but at the same time very simple ways making slimes. We hope we were able to answer all your questions.

Slime is an amazing and slightly strange toy. Essentially, it's just a lump of elastic substance. But children love slimes because they can be crushed, squeezed, pulled, twisted, thrown and smeared. And after all these actions, the slime, as if nothing had happened, returns to its previous form. To the satisfaction of the parents, there won’t even be any dirty marks left from such a toy.

Where did the slime come from?

The first batch of slimes was produced by the American company Mattel back in 1976. The toy gained enormous popularity eight years later, after Ghostbusters, where the character Lizun was.

Since then, many have tried to make slime at home, and quite successfully. Instead of guar gum, craftsmen and inventors used a variety of substances. Homemade slime will not be exactly the same as store-bought slime, but it will definitely have “flowing” properties.

What will it take to make it at home?

Recipe for thick slime with PVA glue

Dry borax should be dissolved in a glass of water. You can use a ready-made solution of tetraborate, then there is no need to mix it with water. In another cup, mix the remaining water (a quarter cup) with one-fourth cup PVA. Add dye. While stirring the adhesive mass, gradually pour half a glass of borax solution into it. All that remains is to knead this jelly-like mass well - and the wonderful DIY slime is ready! The process is shown in more detail in this video.

Recipe based on shampoo and glue, without sodium tetraborate

It happens that there is no borax in the house, but you don’t want to go to the pharmacy to get it. The previous recipe has a popular alternative. Slime without sodium tetraborate can be made using ordinary shampoo and Titan glue. You only need glue of this brand.

Take two parts of shampoo for three parts of glue. It is best to mix shampoo slime in a plastic bag. When the mixture thickens, taste how it turns out. Sometimes you have to add more glue.

Another slime recipe without PVA glue contains plasticine as a base. You will need plasticine of any color, gelatin powder, half a glass of water.

1. First you need to prepare the jelly, following the instructions on the package. Drain it while still unfrozen and hot into a clean separate bowl.
2. Boil 50 ml of water and switch the stove to low heat.
3. 100 - 120 grams of plasticine should be broken into pieces and gradually thrown into the water. Stir constantly.
4. When the plasticine has completely melted, you will need to add gelatin to the mass and stir again.

Making slime from plasticine is simple, but the craft will last a maximum of two days. Plus, it will get your hands dirty. If you want to sculpt from some elastic substance, it is better to buy ball plasticine.

Many people want to know how to make slime without using glue. There is a method, but it is not simple. Required ingredients: polyvinyl alcohol (dry), a glass of water, a couple of tablespoons of borax.

Polyvinyl alcohol powder can sometimes be found under the name “Antimelitel”. He meets on construction markets, in a chemical store, sometimes in a haberdashery store (used for dyeing fabrics).

To make slime according to this recipe you need to do this:

1. Alcohol powder is poured into an iron bowl and placed on fire.
2. The alcohol is boiled for 40 - 45 minutes. It needs to be stirred frequently. After cooking, the dishes are cooled.
3. Then you need to dissolve the dry borax powder in warm water. The crystals should dissolve within 20 minutes.
4. Take one part borax solution to three parts polyvinyl alcohol. Soon the mixture will turn into slime.

You can tint the slime and add essential oil for scent. The licker will be durable and cute.

other methods

There are several other ways to make slime at home. They are inexpensive, but the resulting toys do not look very nice and do not last long. For example, liquid slime can be made from soda or starch. It will harden on the third or fourth day.

But without water and glue there is no way to make a slime. At least one of these components is required. It is impossible to make a slime toy out of paper, because it is not flexible. The only thing that can be made of paper is an image of the same Lizun from “Ghostbusters”.

But anyone can create a slime that glows in the dark. To do this you just need to add to regular composition fluorescent paint. It is sold in craft stores.

How to make slime at home - different ways from improvised means

Today, about this funny toy, probably everyone has heard. For millions of children, interesting colorful chewing gum is one of their favorite toys. As it turns out, making slime at home with your own hands is quite simple.

You need to figure out what slime is and consider a certain number of options on how to make slime at home, yourself, with your own hands.

What is "Lizun"

Slime is the original name for Lizun. The creators of the toy are considered to be Mattel. Date of birth of the toy: 1976 They started calling the toy Lizun in the 90s of the twentieth century, when the cartoon “Ghostbusters” was released. One of the cartoon characters was Lizun (ghost).

He was too similar to Slime: just as green, he could easily pass through walls. And on the surface, after it, there remained sticky mucus of a greenish tint.

One to one, just like Slime, slime is a soft jelly-like substance that can easily change shape, but does not melt in your hands. It can be both hard and elastic; if there is a sudden or strong impact, it sticks to the surface of the ceiling, flows down the wall, leaving an unattractive mark behind it. If desired, the toy can accept the most different shapes.

When the child has had enough of playing, the toy is placed in a jar. If stored in accordance with the rules, it can be used for a long time.

According to psychologists, the Lizun toy is a wonderful anti-stress. With its help, the baby can relax. His imagination will be busy. The child will grow up with a good imagination. In addition, with the help of Slime, motor skills and motor activity begin to develop well, and the nervous system is strengthened. Memory, vision, and attention are trained.

Slime is great entertainment for kids.

Children not only have fun playing with slime, but also get relief from stress. Nervous system receives a beneficial effect. The small muscles of the hand develop well during the game, as do motor skills.

The toy has a gel consistency. It cannot melt, but can take the most unexpected form.

In every store that sells toys for children, you can buy slimes. But you can make this toy yourself at home. Why not do this together with your child? It's not difficult at all.

This process will not take much time. Here too expensive materials and tools will not be needed. It's worth considering options that are affordable and fun to make this interesting toy.

How to make slime with your own hands at home

The easiest way: starch slime

This recipe is simple and safe. This result is achieved because there is no boric acid, glue or detergents. If you make slime using starch, the steps of the process will be simple. All actions are easy to do for both children and adults.

What you will need (materials):

• potato starch (150 g);
• warm water (75 ml.);
• food coloring (2.5 g);
• You need to prepare a bowl and spoon to mix the ingredients.

Step by step instructions:

1. Pour starch into a bowl.
2. Add dye. Mix it with starch.
3. Slowly add water while stirring the mixture.

At first glance, at first, it will seem that the slime did not work out, and it is just a simple jelly. But when stirring continues for a long time, it will become visible how the liquid has become an elastic slurry.

You can play with slime, which is completely safe. For a child, the resulting toy is usually of interest for the first two days.

Then you will have to do everything again, in accordance with the recipe, to get a new slime.

Sparkling Slime made from PVA glue with glitter

To make slime using glitter, you need to have on hand:

• glue with glitter (100 ml);
• water (250 ml);
• borax (1 tsp);
• water (1 tablespoon)

Pour water into a glass. Stir borax in it. Shiny stationery glue is poured into a bowl. All. Here you will need 1 tablespoon of water. It is poured into a bowl of glue.

Mix thoroughly until the mass becomes flexible and pliable. After this, a borax solution is introduced and mixed to the required consistency to form a Lizun.

Slime without sodium tetraborate and without glue with detergent

If a trip to the pharmacy is not in your plans, but you want to make Lizun right now, this option is more suitable than others.

Manufactured Lizun, in appearance, is almost indistinguishable from purchased one. Since making this type of Lizun requires the use of detergent, you will need to wash your hands thoroughly.

Need to take:

• dishwashing liquid
• bowl for mixing ingredients
• hand cream
• dye.

How to do:
In a ratio of 1:2, you need to combine dishwashing detergent with soda. Mix everything well.
Add hand cream. Stir the mass. How much glue is needed will be visible when the ingredients are mixed.
Pour in the dye.

As soon as all these components are mixed, you should pay attention to the mass. It should be slightly runny.
Slime that is not yet 100% ready should be put in a bag. Then, for 4 hours, put it in the refrigerator. As time passes, they pull out the toy and have fun with it.

How to make slime from shampoo

You can get a funny slime if you use ordinary shampoo, add dyes and polymer glue (“Titanium” is great)
Shampoo (100 ml) is poured into the container.
Pour in food coloring (1 tsp).
Stir.
4 tablespoons of glue are combined with colored shampoo.

The resulting liquid mass is poured into a bag and kneaded by hand to obtain the required thickness.
They take out the resulting substance. All! Shampoo slime for children is ready. Place it in a container with a lid to keep the toy there.

The most harmless - made from wheat flour

If you take flour, the fun will be absolutely harmless for children. What to do?

• Sift 2 tablespoons of flour through a sieve.
• Pour 50 ml of cold water on top.
• Then 50 ml hot (boiling water cannot be used).

• Mix the ingredients to obtain a homogeneous consistency.
• Pour in food coloring (3-5 drops).

• If desired, add salt or sugar.
• Stir the dough until the whole mass acquires one shade.
• Place in the refrigerator for 3 hours.

• They take it out.
• Knead with hands.

Slime made from alcohol and sodium tetraborate

Yes, this method cannot be called standard. But how interesting it is to make this toy! Just so that the result does not disappoint, you should not “deviate” from the recipe.

We need to stock up:

• Polyvinyl alcohol;
• Water;
• Sodium tetraborate (brown);
• Dyes (if desired).

It's not a problem to buy borax at the pharmacy. It is sold without requiring a prescription. The price of the product is low. It should be noted that polyvinyl alcohol is sold as a powder, not a liquid. This component is the most important in the recipe. That is why, in this case, neither vodka nor medical alcohol are suitable.

What to do:
Pour polyvinyl alcohol into a bowl (a little). Mix. Put on fire. Cook for 40 minutes. You must stir all the time. To prevent the mass from burning, the fire is kept low. After the bowl is removed from the heat, the mass should cool.

Preferably at room temperature. When the alcohol has been given the opportunity to cool, the other components are mixed at this time. Water is poured into the glass.

Pour in 1 or 2 tablespoons of sodium tetraborate. Mix everything thoroughly until the borax crystals are completely dissolved in the water.

After this, the resulting liquid must be filtered. Add alcohol (it will have cooled down by this time), in a ratio of 1:3. Mix well. If desired, add food coloring. You can use the toy!

Colored slime made from glue and borax with water

This method has gained popularity. A lot of different ways have been invented. And what ingredients are not used! You can consider one of the methods in detail.

Have to take:

• warm water(200 ml);
• a jar of PVA glue (or two);
• food coloring;
• borax (2 bottles).

Before you start working, shake the tube of glue. Then it is poured into a deep bowl. (You can also use ordinary glass jar use.)

You will need another bowl. There they mix water with dye and pour it into a jar of PVA. Mix all components until a homogeneous mass is obtained.

After this, boric acid should “go” into the mass containing the glue. As a result, you will see how the mixture will become viscous and dense in consistency. After viscousness appeared and the mass became thick.

It needs to be kneaded while wearing gloves. If you don’t have them on hand, then mix them in a plastic bag. Place the resulting slime on the leaf for half an hour or an hour. All. The child can play.

How to make from plasticine with gelatin

Plasticine, as a rule, is found in those houses where children live. It is this material that will be useful to make a popular toy. Everyone will be happy with the result!

What you will have to prepare from materials and tools:

• 1 pack of plasticine;
• 1 pack of edible gelatin;
• a spatula to mix the ingredients (or a spoon);
• jar or bowl for mixing;
• iron bowl to heat the gelatin.

How to do:
First, pour gelatin into an iron bowl. Fill cold water. Mix thoroughly. Leave for 60 minutes. How time will pass, you need to heat the gelatin that has been soaked. Bring to a boil, and immediately set the container aside by removing it from the heat.

You need to take a container (preferably plastic). Using a spatula, mix water (50g) with plasticine (100g).
Slowly add gelatin, which has already been prepared, into the resulting mixture. Mix with a spatula to obtain a plastic, homogeneous mass.

Place the bowl with the mixture on the shelf of the refrigerator so that the product completely hardens. After this, you can take it out and give the baby the slime.

Slime made from perfume and hand cream

If you use hand cream, it may turn out to be slime. But there is no 100% guarantee. But why not take a risk?

• Squeeze the cream into a bowl.
• Add dye. Stir.
• Add perfume a little at a time. The resulting mixture is stirred. It should start to thicken.
• Once the desired consistency is achieved, knead the toy with your hands.

Fun transparent slime

There will be no difficulties in making such a toy. To manufacture it you need to prepare the following components and materials:

• Transparent PVA glue (100 ml). It is sold in stationery stores.
• Boric acid, in powder form (1 tbsp);
• A bowl for mixing the ingredients;
• Wooden stick or spoon.

Step-by-step instructions for making it at home:

1. Pour glue into a glass jar.
2. Send boron powder there.
3. Mix thoroughly to obtain a homogeneous elastic slurry.

All. You can play with slime. Only the child needs to be told that he will need to wash his hands with soap after playing.

Simple toothpaste slime

What you need to have to make this toy:

• A tube of toothpaste.
• Cup.
• Food coloring.

Step-by-step instructions for making slime at home:
Squeeze a tube of toothpaste into a glass. It is advisable to buy either a gel or a thick paste. Send the dye into the glass. If you add more of this component, the shade of the slime will become richer.

To obtain a homogeneous mass, you need to thoroughly knead the mixture. You need to make sure that all the grains of dye dissolve.

Once you have a homogeneous mixture, you need to send it to water bath, about 15 minutes. This is quite enough. This needs to be done to remove excess moisture. As a result, the mass will acquire a dense structure.

You need to make sure that the slime does not turn out too dry. To prevent this from happening, it is advisable to smear your hands with oil and stretch the toy. The size of the slime will depend on the amount of toothpaste you use.

Slime made from soap and toothpaste

To make a toy, you need to stock up on:

• toothpaste
• liquid soap;
• dry dye;
• flour.

Step-by-step instruction:

Mix soap and toothpaste.

Mix the dye with flour. When adding flour, it is necessary to stir the mixture without stopping. If you take soap and paste in an amount of 20 g (of each component), then 5 tsp of flour will be enough.

When all the flour is poured out, mix the whole mass thoroughly so that the dough does not acquire a homogeneous structure.
It is advisable to pour in a little water. Then the mass is kneaded until the slime becomes viscous.

An easy way to make slime from hydrogen peroxide

Since the cost of making such a toy is low, this method has become very popular. But some people are disappointed because they were hoping for a different result. According to this recipe, the toy will be hard, but it will jump well.

You will need:

• 1 glass of water;
• 100 g starch or soda;
• 100 g PVA glue;
• hydrogen peroxide;
• dye.

You need a medium sized container. There you will need to mix water with soda (or starch), in equal ratio. It is necessary for the mass to form a jelly-like state. Then you need to pour in the glue. Mix well.

Hydrogen peroxide must be poured into this mixture. Add dye. Mix again. It should be noted that the slime eventually becomes airy precisely because of hydrogen peroxide. If it becomes clear that the mass is too thick, you need to change the proportions by adding more water.

Slime using washing powder

To make such a slime, you will need to use a liquid analogue of washing powder. There is no need to try using gel or liquid soap. The toy will not work, because the consistency will be different.

Before you begin production, you must have:

• PVA glue;
• liquid washing powder;
• food coloring;
• thin rubber gloves;
• container.

Manufacturing stages:

Pour PVA glue (1 cup) into the prepared bowl. You can pour in large quantity, or maybe less. This will depend on what size you want to make the slime.

Place 5-6 drops of food coloring in PVA. Stir until the mixture acquires a uniform color.

Take 2 tbsp. liquid washing powder. Pour into mixture. Mix the solution thoroughly. You will see how, over time, it becomes sticky. It is necessary to bring the solution to the state of putty. In the event that the solution is very thick. Drop by drop, add liquid powder to dilute the mixture.

Wear gloves. Remove the solution from the bowl and start kneading it like dough. You need to get rid of excess drops of powder.

If this is not done, the slime will be similar in consistency to soft rubber.

It is necessary that the toy is stored in a closed container. When it becomes clear that the toy is losing its properties, it needs to be put in the refrigerator for three to four hours.

How to make slime from magnets

Magnetic slime is considered an original toy. He will be able to emit a glow in the dark. You can make this toy yourself at home.

• Neodymium magnets;
• boru;
• water;
• glue;
• iron oxide.

Pour 1 glass of water into a bowl. Add 0.5 tsp. burs. Mix well to completely dissolve the boron in water. A mixture will be needed to activate the second half of the composition.

Pour 1 cup of water into another bowl. Add glue (30g). Mix well. Pour in paint. To make the slime shine in the dark, it is advisable to use phosphor paint.

A boron solution is gradually poured into the glue mixture. At the same time, you need to stir the adhesive mixture all the time. At the moment when the mixture begins to harden and acquires the desired consistency, there is no need to add boron solution. What is left is poured out.

The resulting slime must be leveled on a table or board. Iron oxide (a little) is poured into the center of the toy. Knead the slime until it all turns gray.

The magnetic toy is ready. When the slime comes into contact with the magnet, it will crawl behind it.

DIY shaving foam slime

As is clear from the title, the main component in making the toy will be shaving foam. The recipe is popular because it is simple.

You need to prepare materials:

• Shaving foam (150 g);
• 100 ml PVA glue;
• Medium sized bowl;
• Spoon for mixing ingredients;

How to make slime at home from men's shaving foam:

Pour glue into a container.
Gradually pour foam into it. The key word is "gradually".

When the slime has become viscous and elastic, this indicates that enough foam has been added. That's why 150g is a rough guide. The person making the slime must take control of the amount of foam.

The components are mixed until a ball is formed, the structure of which is dense. It shouldn't stick to your hands.

Then they knead the slurry until the structure becomes elastic. If the slime is mixed well, it will not stick to your hands.
If you want the toy to be bright and beautiful, add food coloring during the manufacturing process.

What to do if the slime doesn't work out

In the event that the slime failed to do so. As intended, all errors are easily corrected.

1. To give the toy elasticity, you need to add a few drops of vinegar. Then it will stretch better
   If you add a few drops of hydrogen peroxide, the mass will turn out more fluffy. This is usually done when making fluffy slime.
2. To make the slime slippery, you need to use glycerin.
3. A luminous toy is made using fluorescent paint.
4. When the slime is very soft, put it in a jar and sprinkle a little salt on top. Close with a lid. So the toy should stand all night. The toy will become elastic as the salt absorbs excess moisture.
5. When the slime turns out to be hard, you can soften the structure by placing the slime in a jar, adding water, and leaving it overnight under the lid.
6. To give the toy pleasant aroma, it is advisable to use essential oil, vanillin or food flavoring.
7. By adding tiny sawdust or iron oxide, you get a magnetic slime. The toy must be kneaded thoroughly to distribute the additive evenly. As a result, the toy will be attracted to any magnets.
8. An “anti-stress toy” will work if the mucus is in balloon. This is done using a large syringe without a needle.
9. In order to make the slime larger in size, place it in a bowl of water for 3 hours. Don't worry if it breaks into several pieces. Everything is according to the rules. You need to add a little body or hand cream and salt. Mix. The slime will become elastic and increase in size.

On a note! You can add foam balls to the toy, different colors. This will not only increase the size of the slime, but also make it bright.

Rules for caring for slime

The toy, which both children and adults are delighted with, sticks to surfaces and leaves no marks behind - this is the famous slime. It can be compared to thick jelly or jelly.

It is made using a jelly-like material. That is why, over time, it ceases to be elastic and attractive.

If you know how to care for your slime, you can extend its lifespan. It is necessary that the toy “be neat.” So that it would be pleasant to play with.

Where to store

For the slime, you need to select a separate container with a lid. Store it on one of the refrigerator shelves. Storage in the freezer is prohibited.

How to care for slime

The main thing to follow is to make sure that the slime is not dirty. Slime has sticky properties, so small particles of debris easily stick to it. It is advisable that the toy should not be in places where there is dust.

For example, dust accumulates under the sofa. Do not allow the slime to come into contact with surfaces covered with lint. If the slime is dirty, remove the debris using alcohol. The second option is to remove it carefully using tweezers or a needle. You can also remove particles of debris with your finger, if possible.

Slime “doesn’t like it” if the air in the room is too dry, or vice versa – very humid. If the room is dry, it may become hard and lose its sticky properties. And if there is excess humidity, it swells and becomes more humid.

How to act in such a situation? What should I do to prevent the shape of the toy from becoming deformed? If there is not enough moisture, the slime will dry out. We need to save him by pouring a little water (5-7 drops) into his “apartment” (container). The slime will absorb moisture. This will help him recover.

If suddenly the toy becomes liquid due to excess moisture, using regular table salt. Pour a few grains of salt into the container. Cover the top with a lid. The “house” is shaken in the air.

To make the slime grow, pour a few drops of water into the container overnight. Close with a lid. Place it on the refrigerator shelf. You cannot store the toy in the freezer, otherwise the slime will become covered with frost.

When a toy is not played with for a long time, it may become moldy. If mold is found, it is advisable to throw away the slime.

Video: how to properly store Lizun

Slime or “chewing gum for hands” is an unusual plastic toy that changes its shape, which you can easily make yourself at home. How to do this? In our article you can learn several simple ways to make slime.

Shampoo and salt

Making slime from shampoo and salt is quite simple. To do this you will need the following components:

• thick shampoo - 4-5 tsp;
• salt - 1 tsp.

Place shampoo and salt in a small container. Then mix thoroughly and put away refrigerator for 15-20 minutes. This “chewing gum for hands” will be somewhat different from the store-bought version due to its greater viscousness and stickiness.

Hair fixation spray

Hairsprays contain a special substance - polyvinyl acetate, which forms a film on the surface of the hair, due to which it is possible to preserve its volume. You can make your own slime from any hairspray. Take:

• hairspray - 20-25 sprays;
• PVA glue - 95 g;
• gouache or acrylic paint - 1-2 drops.

Pour PVA glue into a bowl and start spraying hairspray, stirring the mixture constantly. After the future slime begins to thicken, add gouache or acrylic paint to add color. Continue stirring until smooth.

Plasticine

To prepare “hand chewing gum” from plasticine you need the following ingredients:

• transparent glue - 250 ml;
• soft plasticine - 15-20 g;
• boiling water - 300 ml.

Take a small bowl, place half a teaspoon of sodium tetraborate in it and pour boiling water over it, stir thoroughly until the “borax” is completely dissolved. Give the mixture some time to cool. Prepare a second container to mix the plasticine and clear glue until smooth. Then mix all the ingredients completely until the stickiness of the composition on your hands disappears. This slime should be quite sticky.

PVA glue

Oddly enough, PVA glue can help in such an interesting activity as making slime. Ingredients:

• PVA glue - 100 g;
• acrylic paint (any shade) - 1 tbsp;
• water - 200 ml;
• contact lens care liquid - 1 tsp;
• baking soda - 1 tbsp.

Pour PVA glue into a small plastic container and mix it with water. Add acrylic paint little by little - the result should be a liquid of even color. Now take another container and pour water into it and pour out baking soda- mix thoroughly until sodium bicarbonate is completely dissolved. Mix the contents of the two containers together until a thick mass is formed.

Sodium tetraborate

Sodium tetraborate is a sodium salt boric acid, widely used in industrial production. It’s quite easy to make a slime from this substance. The following ingredients are needed:

• cold water - 250 ml;
• PVA glue - 100 g;
• sodium tetraborate (borax) - ½ tsp;
• gouache - 2 tsp;
• glycerin - 2-3 drops.

Pour water and PVA glue into a shallow bowl and mix thoroughly. Then add a little gouache (color at your discretion), half a teaspoon of sodium tetraborate, glycerin - mix until a homogeneous consistency is obtained. Place the mixture in the refrigerator for 15 minutes.

Shaving foam and PVA glue

Slime can even be made from ordinary shaving foam. Take the following:

• shaving foam - 200 ml;
• PVA glue - 100 g;
• water - 200 ml;
• sodium tetraborate - ½ tsp;
• gouache paints - 50 g.

Place the “borax” in a plate with high sides or a bowl and pour in water, mix thoroughly until the tetraborate is completely dissolved. Then add shaving foam, PVA glue and paints. Mix all ingredients again. The result should be a soft lump that will stick to your hands, so to get rid of the stickiness you need to knead it in your hand for a few minutes and then put it in the refrigerator for 10-15 minutes.

Starch

You can also make “chewing gum for your hands” yourself using starch. Components:

• starch - 100 g;
• PVA glue - 100 g;
• water - ½ cup;
• food coloring or acrylic paints -50 g.

Pour half a glass of water into a shallow bowl, add starch, stirring thoroughly until completely dissolved. Then add food coloring or acrylic paints (color optional). Let the mixture cool slightly by placing it in the refrigerator. Transfer the starch into a bag or plastic bag and mix with PVA glue. Shake the contents of the package thoroughly until a homogeneous mass is formed.

Toothpaste

There are 2 ways to make slime using toothpaste. Let's look at each of them in more detail.

On the water

You need to take the following ingredients:

• toothpaste - 100 g;
• water - 200 ml.

Squeeze toothpaste into a bowl. Bring water to a boil in a small saucepan over medium heat. Place the bowl of pasta in a water bath and cook for 15-20 minutes. Don't forget to stir constantly. As a result of the above manipulations, you should get a dry mixture, which must be left to cool for a while. Lubricate your hands with olive oil and begin to knead the cooked mass. You will get a viscous and elastic slime.

In a microwave oven

To make slime in the microwave using toothpaste you will need:

• toothpaste - 100 g;
• cosmetic oil (for example, for hair or face) - 10 ml.

Squeeze the toothpaste into a shallow bowl designed for microwave ovens. Place it in the microwave to warm up for 2-3 minutes. Then take out the plate, mix the pasta thoroughly and send it back to heat for another 3 minutes. As a result of all manipulations, you should get a dry mixture. Apply cosmetic oil to the future slime and knead it thoroughly in your hands.

Dishwashing liquid

Making “hand gum” from detergent is very simple. Ingredients:

• dishwashing detergent - 100 ml;
• baking soda - 2 tbsp;
• hand cream - 1 tsp;
• acrylic paint - 1-2 drops.

Into container small size put out the detergent, then add some baking soda, hand cream, and acrylic paint- mix the contents very thoroughly. The mixture should be quite thick. Place the resulting mixture in the refrigerator for 2-3 hours.

Flour

To prepare flour-based slime you need the following ingredients:

• wheat flour - 100 g;
• hot water - 100 ml;
• cold water - 100 ml;
• acrylic paint - 1-2 drops.

Sift the wheat flour using a sieve into a shallow container. Add to it first cold water, and then hot (never use boiling water) and dye. Mix the contents of the dish thoroughly. Place the mixture in the refrigerator for 2-3 hours.

Air freshener

Do " hand chewing gum"from an air freshener is possible, but only with the help of additional components:

• PVA glue - 100 g;
• air freshener - 20-30 sprays;
• sodium tetraborate - ½ tsp.

Pour PVA glue into a shallow bowl and add air freshener to it - mix thoroughly. Then pour in half a teaspoon of sodium tetraborate and mix everything thoroughly again. Let the resulting mixture sit in the refrigerator for 10 minutes.

Nail polish

You can use ordinary nail polish as the main component of the slime. Take:

• nail polish - 3-4 drops;
• PVA glue - 100 g;
• water - 100 ml;
• sodium tetraborate - ½ tsp.

First, mix cosmetic varnish and PVA glue. Then add some water and half a teaspoon of sodium tetraborate. Mix all ingredients thoroughly. Place the resulting mixture in the refrigerator for 10 minutes.

Gelatin

You can make slime without using PVA glue. For this you will need:

• plasticine - 100 g;
• gelatin - 50 g;
• water - 100 ml.

Add gelatin to the water and stir until it is completely dissolved. Then let it brew for 1-2 hours. Boil over low heat for 2-3 minutes. In a separate container, mix plasticine with water and gelatin. Knead the mixture thoroughly in your hands until you obtain a homogeneous mass.

Chocolate spread “Nutella”

Slime made from Nutella chocolate spread is edible. It includes:

• Nutella paste - 4-5 tbsp;
• Marshmallow marshmallows - 10-15 pcs.

Melt the marshmallows in the microwave. Add Nutella chocolate spread to it. Mix thoroughly - it will take a lot of time, but the result is worth it. When ready, you can eat the resulting slime by spreading it on bread or cookies.

Candies "Frutella"

For cooking edible slime The following ingredients will be required:

• “Frutella” candies - 6-7 pcs.;
• powdered sugar - 100 g;
• water - 300 ml.

Melt the candies in a water bath. Let cool. Add powdered sugar and roll the mixture in your hands until it loses its stickiness.

Silicate glue

“Hand gum” made from silicate glue will be completely transparent. To make it you need:

• silicate glue - 100 g;
• water - 250 ml;
• sodium tetraborate - ½ tsp.

Pour 250 ml of water into a small bowl and add sodium tetraborate - mix until the “borax” is completely dissolved. Then squeeze out the silicate glue and thoroughly mix all the ingredients together.

Salt and soap

Let's look at another one unusual recipe making homemade slime. Take the following:

• liquid soap - 100 ml;
• salt - 1 tsp;
• acrylic paints or food coloring - 1-2 drops.

Pour 100 ml liquid soap into a container, then add salt and dye to it. Mix thoroughly. Place in the refrigerator for 15 minutes.

Metal shavings

The recipe for making slime from metal shavings is considered unique because it is magnetic. Ingredients:

• metal shavings - 100 g;
• PVA glue - 100 g;
• boric acid - 1 tsp.

In a shallow container, mix iron filings, PVA glue and boric acid. Stir until the mixture becomes thick enough. Then take the magnet and bring it to the slime - it should stretch out.

Polyvinyl alcohol

Polyvinyl alcohol or PVA is often used to make slime as a component that replaces PVA glue. Ingredients:

• polyvinyl alcohol - 3-4 tbsp.
• “borax” - 1 tsp;
• food coloring or gouache - 1-2 drops;
• warm water - 200 ml;
• medical bandage - 30 cm.

Dilute the alcohol in water and then simmer over low heat for 30 minutes. In a small bowl, dissolve the borax in water and pass through a bandage to remove excess liquid. Mix sodium tetraborate with PVA and gouache. Place in a plastic bag and remember well with your hands. Place the slime in the refrigerator for 15 minutes.

Baking soda and glycerin

Prepare the following ingredients:

• baking soda - 100 g;
• glycerin - 2-3 drops;
• sodium tetraborate - ½ tsp;
• PVA glue - 100 g;
• dye - 1-2 drops;
• water - 200 ml.

Heat the water without bringing it to a boil. Add sodium tetraborate, glycerin, PVA glue and dye to it. Mix all the above ingredients thoroughly until a homogeneous mass is formed.

Hydrogen peroxide

To make slime based on hydrogen peroxide you will need:

• hydrogen peroxide - 1 tbsp;
• PVA glue - 100 g;
• water -100 ml;
• dye - 1-2 drops;
• baking soda - 100 g.

Water

You will need the following components:

• water - 200 ml;
• baking soda - 100 g;
• dye - 1-2 drops;
• shower gel - 2 tbsp.

Dissolve baking soda in water. Add a couple of drops of dye, as well as 2 tablespoons of shower gel. Mix all ingredients thoroughly. Leave the resulting mass to harden in the refrigerator for 20 minutes.

In a separate container, mix baking soda with water. Add dye and PVA glue and mix again. At the very end, pour in hydrogen peroxide to give the mixture some airiness. The slime will become foamy.

Glue stick

The following ingredients will be required:

• glue stick - 1 pc.;
• dye - 1-2 drops;
• sodium tetraborate - ½ tsp;
• water - 100 ml.

Remove the glue from the plastic shell, put it in special dishes Heat in a microwave oven for 2-3 minutes. Add dye, water and sodium tetraborate to the glue and mix thoroughly. Place the resulting mass in the refrigerator for 5-10 minutes.

In our article you got acquainted with the most interesting and unique recipes for making a slime toy at home. All of the above ingredients are safe as long as proper handling of chemicals is followed.

A cool toy for children – “Slime” or “Slime”. Did you know that it’s as simple as shelling pears?

In this article we will look at the simplest ways to make homemade handgam or slime yourself, and now also slime. But first, let’s tell you (maybe someone doesn’t know yet) what kind of miracle this is.

What is slime or slime?

Immediately Video:

Surely you have seen or even purchased such an unusual jelly “byaku” for your child. It can still stretch and stretch, take any shape and not stick to your hands.

In common parlance this toy is called “lizun”, but in fact (where it came from - from the States) its name in English is “handgum”. It’s not hard to guess - “hand” (hand), but “gum” (chewing gum).

And today you can often hear - how to make “Slime” at home with your own hands? What is slime and what is it for? In English, “Slime” is a children’s toy made of jelly-like material, pleasant to the touch, able to stretch and return to its original state.

Again, the same slime in a simple way! Slimers can make this kind of sticky jelly from any material with their own hands and using available materials (although for some you still have to go to the store or pharmacy).

Now let’s start making slime at home - we’ll make the slime just like in the store or even better.

How to make slime at home without sodium tetraborate

There are several simple ways or recipes on how to make slime at home without boron (sodium tetraborate). It's safe for your children!

The easiest way is from water and starch without any glue

We only need starch and water. Mix both ingredients together in equal proportions or 2 parts water and three parts starch. And we get our homemade slime. For a firmer consistency, you need to add more starch. And in order for it to become bright - dye.

You need to understand that such a toy will not be exactly the one we see more often. But the kids will still be happy. And use only warm water.

Slime made from starch and PVA glue

In this case, we need PVA glue and preferably the freshest one. Mix water and starch separately, then add dye (you can use glitter with essential oils). Mix thoroughly without lumps. Lastly, pour in the glue. For convenience, use a bag instead of a container.

Ingredients: PVA glue - 50 mg, water - 100 mg, starch (you can use soda) - 1 tablespoon, dye (green paint, gouache, food coloring).

The same can be done with soda used in the kitchen. That is, instead of starch and water, mix soda.

From shampoo and glue "Titan"

This time we take high-quality, not expired Titan glue. You will find it at any hardware store.

Take a bag and pour two parts of shampoo (absolutely any) and three parts of glue into it. Just shake a little until completely mixed and thickened, and the slime is ready. To make the toy look more beautiful, add a little dye and glitter into the shampoo before adding glue.

How to make slime at home - store-bought version

To make slime at home, just like in a store, we will need an additional (main) ingredient - sodium tetraborate (either a liquid solution or a dry powder will do).

Essential elements:

• PVA glue – 100 grams,
• 1 bottle of sodium tetraborate (4%) or, if dry, mix 1 tablespoon of powder with half a glass of water,
• dye for color option.

— Instead of tetraborate, you can use Borax powder, which is available for free purchase in pharmacies.

Manufacturing:

• take suitable container and pour glue there (the more glue, the larger the toy),
• carefully add the dye (do not overdo it, otherwise the slime will get dirty), mix until smooth,
• slowly pour in the boron solution (so that the slime does not stick to your hands and is not liquid, you can add more borax than required), mix thoroughly and we get a jelly mass,
• then, to remove excess moisture, you should blot it with a napkin (and in the future, when the child plays, it is best to put the handgam on paper - this way less lint and debris sticks to it)
• and lastly, place the resulting clot in a bag and knead for 3-5 minutes, and now it’s time to play with it.

• When making, do not use cold liquid (water or shampoo),
• Try not to place it on products with lint (cats and dogs included),
• Although homemade slime is safe, we do not recommend eating it or putting it in your mouth.
• To make it smell delicious, mix it with essential oils,
• The sparkles inside the slime look very nice,
• Choose a new adhesive base, not one lying somewhere on a shelf,
• Store in a closed container and in a cool place.
• But even if the homemade slime is a little dry, place it in warm water.

And another DIY slime recipe – It’s just the bomb!

Shaving foam slime - sea green

• Pour 125 mg glue into a separate container. A prerequisite is that it must be thick and of good quality.
• Add a little emerald acrylic paint. Stir and get a thick dark mass.
• It's time to lighten it - add shaving foam, a lot of foam. Gently mix the foam with the colored mixture. Reminds me of ice cream or sweet cream.
• Pour some water and 15 grams of boric acid into a jar, and a couple of drops of hand soap.
• Stir with a wooden stick and the thickener is ready. Pour the mixture into the colored foam and stir again.
• It turns out to be a real slime with your own hands.

Well, now, while we were putting together this article, someone tested and made a slime at home with maximum characteristics.

A real bomb - how to make magnetic slime at home - video

The best and most correct slime, made by hand

• We pour, again, as in the previous one, thick transparent glue - 125 milligrams.
• Add bright pink acrylic paint. Stir until the color is uniform.
• Add contact lens liquid a little at a time and mix. In total we poured in about 10 grams.
• Add half a teaspoon or a large pinch of baking soda. As you knead, the mass begins to thicken and stretch. Great, she is completely behind the walls.
• Next, knead it with your hands until it stops sticking to your palms.
• It turned out to be a cool soft and elastic slime. It doesn't stick, doesn't tear and stretches perfectly. It's great to play with and you don't even want to let go of it. Reminds me of a huge pink bubblegum.

Perhaps one of the most successful recipes we have tried. Stretched in thin film. You can blow bubbles out of it – it’s so elastic.

Video on how to make cool slime without glue or thickener

Making slime from shampoo and toothpaste

You can use any shampoo, but two in one is best - well, like shampoo plus conditioner.

You will need:

• shampoo - 30 ml. (4 tablespoons),
• toothpaste - 1 teaspoon,
• dye - 5 drops, if you want to make the slime colored.

1. Pour shampoo into a bowl and add toothpaste.
2. Stir until the mixture becomes more dense.
3. If the slime turns out to be liquid, add a little toothpaste; if it is too thick, add shampoo.
4. As soon as you realize that the slime has turned out, put it in the freezer for an hour.
5. After the time has passed, take it out and knead it with your hands and play with it.

For any slime, get a box with a lid - this way it will last longer.

Slime made from soap and sugar without glue

For a sweet but inedible slime you need:

• liquid soap - 5 tablespoons,
• granulated sugar - 3 tablespoons,
• dye or glitter - if you want to make original slime.

1. Mix all products in one container. First place the soap, and then gradually add sugar, stirring constantly.
2. Cover with a lid or bag and refrigerate until the next day.
3. Then check the slime for functionality. And if necessary, add more soap or sugar.

You will immediately understand when the slime is real - by touching it with your hands.