How to make slime that sticks to the wall. Chewing gum for hands or a hand ghost - how to make slime yourself. The recipe consists of

« Lizun"is a mass of viscous jelly-like material that has the properties of a non-Newtonian fluid. She stretches and takes well various shapes. This toy is called differently handgam or slime(Slime), which translated from English means “slime”.

Which of the children, and even adults, would deny themselves a fun game with slime? Make it with my own hands It will take a little time, and you will need even less materials. Below are the easiest ways to make slime yourself from scrap materials. They differ mainly in the ingredients that are used to make homemade slime.

If you follow all the rules and have a strong desire, handgama can be done at home in 5 minutes.

Sodium tetraborate produces an interesting slime, which is similar in consistency to the original sold in children's goods stores.

Materials

To make this slime, prepare:

• boron – 0.5 teaspoons;
• transparent stationery glue – 30 g;
• yellow and green food colors;
• water.

1. Take any two containers. The mixture for making slime will need to be prepared in two parts. Pour a cup of warm water and half a teaspoon of boron into the first container. Mix this solution thoroughly until the powder is completely dissolved.

2. In a second container, mix half a cup of water, glue, 5 drops of yellow and 2 drops of green dye. Mix all ingredients thoroughly until you have a uniform consistency.

3. Carefully pour the boron solution into the second container. You will see how the mixture begins to turn into a viscous mass before your eyes. You can already play with it. This is slime. Make sure your child does not put it in his mouth.

Be sure to store the slime in a closed container.

How to make slime from glue and starch

Materials

To make this slime you will need:

• liquid starch;
• PVA glue;
• small tight package;
• food coloring.

You need to use food coloring. If he plays with slime Small child, prefer natural food dyes. If you don't have dyes, you can add gouache to the mixture.

Please also pay attention to the PVA glue; in order to make the slime, you need recently made glue. The glue should be white.

1. Pour 70 ml of liquid starch into the bag. It differs from food grade and is used when washing clothes. If you don’t have one, you can use regular one, but it must first be diluted with water in a ratio of 1:2.

2. Add a few drops of dye to the bag. You don't need to add a lot of dye, otherwise the slime will stain your hands while playing.

3. Next, pour 25 ml of PVA glue into the bag, after shaking the bottle well.

4. Close the bag tightly or tie it. Mix the contents thoroughly. This must be done until the bulk turns into a clot. In addition to this, the bag will contain some liquid.

5. The liquid must be drained. The clot itself is the slime. Blot it with a napkin, removing it from the surface excess moisture. Now they can play.

If your slime is sticky, rework it by adding less glue or increasing the starch content. If the slime, on the contrary, is too hard or crumbles, then you have added more starch than necessary.

Slime prepared in this way will be suitable for play within a week. It must be stored in a closed container or jar to prevent dust from falling on it.

Don’t forget to wash your child’s hands after playing and don’t let him taste it.

Soda slime

Because it contains dishwashing liquid, soda slime is recommended to be given to children under adult supervision. After playing with this slime, you should definitely wash your hands.

Materials

• Dishwashing liquid;
• soda;
• water;
• dyes as desired.

Step 1. Pour dishwashing liquid into a container. There is no specific dosage, gradually mixing the remaining components, you can simply pour in dish liquid or water to thin the mucus.

Step 2. Pour soda into the container and mix everything thoroughly. Your mixture should look something like the photo. This mixture is a bit thick for slime, so dilute it a little with water and mix everything thoroughly again.

The final color will be the same as in the photo. You can change it up a little by adding a few drops of dye.

The soda slime is ready.

A simple way to make slime from shampoo

This is a very simple way to make slime, it turns out to be the right consistency, but you need to store it in the refrigerator between games. This slime, like many others, should never be put in your mouth, and your hands should be thoroughly washed after playing with it.

Materials

• shampoo;
• dishwashing liquid or shower gel.

Step 1. Take a container and mix shampoo and dishwashing liquid or shower gel in equal proportions. Please note that the gel and liquid should not contain any granules, and if you want the slime to remain transparent, the components must be of the same quality.

Step 2. Mix the ingredients thoroughly and place them in containers in the refrigerator. The very next day you can use it for games. In the future, store it in the refrigerator in a closed container. When a lot of debris sticks to the slime, you can throw it away; it will begin to lose its properties.

The maximum shelf life of this slime is 1 month.

Washing powder slime

To make such a slime, you will need not ordinary dry washing powder, but its liquid analogue. It is necessary to use the powder, since liquid soap, gel, etc., have a completely different consistency and when combined with the elements of this recipe, it will not be possible to make a good slime out of them.

Materials

So, before starting work, prepare:

• liquid washing powder;
• PVA glue;
• food coloring;
• thin rubber gloves;
• container.

1. Pour a quarter cup of PVA glue into an empty container. You can take more or less, it all depends on the desired size of the slime.

2. Add a few drops of food coloring to the glue and mix this solution thoroughly until the color is uniform.

3. Pour 2 tablespoons of liquid powder into the solution. Mix the entire solution thoroughly. Gradually it will become sticky and the consistency will resemble putty. If your solution is too thick, add it drop by drop. liquid powder, diluting the solution.

4. Put on gloves, remove the mixture from the container and carefully, like dough, begin to knead the workpiece. Extra drops of powder should come out of this solution; if there are any, the consistency itself will resemble a soft rubber band.

The slime must be stored in a closed container. If it starts to lose its properties, put it in the refrigerator for several hours.

An easy way to make slime from flour

Relatively safe for children, slime is made from flour. Even small children can play like this, especially if natural colors are used instead of food coloring. With natural dyes, the color of the slime will not be as intense.

Materials

To make slime, prepare:

• flour;
• hot water;
• cold water;
• dyes;
• apron.

1. Pour two cups of flour into a container. Pass it through a sieve so that the mass is homogeneous and easier to prepare.

2. Pour a quarter cup into the bowl with flour cold water.

3. Then pour in a quarter cup hot water, but not boiling water.

4. Mix the entire mixture thoroughly. Be sure to ensure that the consistency is uniform and without lumps. It is very important.

5. Add a few drops of food or natural coloring. If food coloring, add a couple of drops. Mix the entire mixture thoroughly again. It should be sticky.

6. Place the container with the slime in the refrigerator for several hours. After the mixture has cooled, it can be used for its intended purpose.

How to make magnetic slime

An original magnetic slime that can glow in the dark can also be made at home.

Materials

• Bora;
• water;
• glue;
• iron oxide;
• Neodymium magnets.

1. In a container, mix one glass of water and half a teaspoon of boron. Mix everything thoroughly so that the boron is completely dissolved in the water. This mixture will be needed to activate the second half of the composition.

2. In a second container, mix half a glass of water and 30 grams of glue. Mix them thoroughly and add paint. You can add phosphor paint here if you want the slime to glow in the dark.

3. Carefully pour the boron solution into the adhesive mixture. The solution must be added gradually, constantly stirring the glue mixture. Once the mixture begins to harden and reaches the desired consistency, stop adding the boron solution. You can throw out the rest of it.

4. Take the prepared slime and smooth it out on a flat surface. Place some iron oxide in the middle of the slime. Then knead the handgam thoroughly until it acquires a uniform gray color.

Magnetic slime is ready. When interacting with a magnet, the toy will be pulled towards it.

• You can experiment with slime colors and even make a whole family. You can also use various sparkles, small stars, etc.
• Can be used essential oil to give the handgam an interesting smell.
• If you want the slime to retain its properties and last longer, it should be stored in a closed container and in a cool place. It is also advisable not to place such a toy on a carpet or other surface to which small fibers can easily stick.
• If the slime starts to dry out, place it in a container with warm water.
• This toy is NOT toxic or poisonous, although of course you should not eat it and you should wash your hands after playing.
• It is also worth noting that some try to make slime using soda instead of borax or starch, but in this case the result will be a rather solid mass. So don't waste your time on this.
• Remember that the life of such a toy is extremely short (about a week), so stock up on materials for making slime at home, as this activity is contagious!

This Slime toy first appeared in 1976 and was made by Mattel.

• The toy gained enormous popularity from the film “Ghostbusters” (1984), namely one of its main characters, a ghost named “Lizun”.
• Handgam can play the role of a means for hand massage, as well as for the development fine motor skills.
• The slime that is sold in the store (aka "Smart Plasticine") is the result of a mixture of: 65% dimethylsiloxane, 17% silica, 9% Thixatrol ST (castor oil derivatives), 4% polydimethylsiloxane, 1% decamethylcyclopentasiloxane, 1% glycerin and 1 % titanium dioxide.

New articles and photographs in the " " section:

Don't miss interesting news in photos:

In 1997, a cartoon called “Ghostbusters” appeared. One of the cartoon characters was a ghost called Lizun. It was green in color and could fly through walls and leave behind a sticky green liquid.
He became a popular character and this played into the hands of the American company Matell. Since 1976, this company began producing toys that resembled this character.

Little viewers really liked the green ghost and sales of this toy skyrocketed.

While playing with slime, fine motor skills, vestibular apparatus and motor activity develop. And it has long been known that fine motor skills are associated with the child’s nervous system, attention, vision, memory and perception.

Children need to be told that when playing with slime, they should not throw it at painted walls. water-based paint. And also on those surfaces that cannot be washed, as it leaves a greasy residue.

How to make slime from sodium tetraborate (Borax) and glue with your own hands

Made from borax, it is the same as the one sold in stores.

Ingredients:

Stages of production of toys from borax and glue:

Slime prepared according to this recipe should not be taken into the mouth. It must be stored in a closed jar.

How to make slime from starch and glue with your own hands.

Ingredients:

• PVA glue;
• small plastic bag;
• liquid starch;
• food coloring.

If you don't have food coloring, you can replace it with natural or simple gouache.

It is better to buy new PVA glue and it should be white.

Stages of making a toy from starch and glue:

If the toy is very sticky, it means you used a lot of glue or not enough starch. Rework it a little by adjusting the amount of glue or starch.

If the slime turns out hard or crumbly, it means that an excessive amount of starch was used.

The toy prepared according to this recipe should be stored in a closed jar and its shelf life will be about a week. Also remember not to put it in your mouth and wash your hands after playing with it.

How to make slime from water and soda with your own hands

Ingredients:

• soda;
• water;
• dishwashing liquid;
• dyes as desired.

Stages of making a toy from water and soda:

How to make slime from shampoo with your own hands.

This is one of the easiest ways to make slime. Every time after playing it needs to be put in the refrigerator. It should not be put in your mouth and you should wash your hands after playing with it.

Ingredients:

• shower gel or dishwashing liquid.

Stages of making a toy from shampoo:

DIY slime made from washing powder.

To make slime according to this recipe, we will need to take not ordinary dry washing powder, liquid.

Ingredients:

• PVA glue;
• food coloring;
• liquid washing powder;
• latex gloves.

Stages of making a toy from liquid washing powder:

A toy prepared in this way should be stored in a closed jar. If it changes its appearance, you can put it in the refrigerator.

How to make slime from flour with your own hands

To make a slime that is relatively safe for children. You can use a recipe that contains flour. And replace food colors with natural ones.

Ingredients:

• flour;
• cold water;
• hot water;
• dyes;
• apron.

Stages of making a toy from flour:

How to make magnetic slime with your own hands

Using this recipe you can make a magnetic slime that will glow in the dark.

We will need:

• water;
• borax;
• iron oxide;
• glue;
• Neodymium magnets;
• phosphorus paint.

Stages of making magnetic slime:

Now your magnetic slime is ready. If you bring a magnet closer to it, it will be drawn to it.

If you can't make slime

It happens that it doesn’t turn out exactly the way you wanted. It may depend on the quality, ingredients you use to make it. Because of this, the proportions indicated in the methods described above may be incorrect. Therefore, you need to try to choose correct proportions during the production of this toy.
The correct slime comes out of the container as a single mass. It may be patchy in some places, but after you knead it in your hands for two minutes, it will become stringy, relatively sticky and smooth.

If it sticks a lot to your fingers, you need to make an effort to clean your hands. In this case, it may help to add liquid starch or just water to liquefy the slime. It depends on the recipe you made it from.

And if, on the contrary, it does not stick to your hands at all, but simply slides off them. This means that there is a lot of liquid in it. To fix this, you need to remove excess liquid and add a little glue, flour or borax solution. The ingredients added depend on the method of preparing the slime. After adding the required material You need to mix this mixture well.

Handgam (“hand chewing gum”), slime or the more common version of the name of the toy - slime is loved by children of all ages. Although the fashion for it began a long time ago, it still continues today and its popularity is only increasing. The jelly-like colored substance, according to doctors, helps to calm down, improves neurohumoral processes in the child’s body, develops hand motor skills and opens up creative talents. young talents. In order not to buy a ready-made toy with an unknown composition, caring parents are considering options on how to make slime yourself. Several simple “recipes” for cooking are in our article.

The most common option, which looks exactly the same as popular toys on the shelves of children's stores, is slime with sodium salt of boric acid (also called borax or sodium tetraborate).

To make it, in addition to ½ teaspoon of the main component, the following ingredients are needed:

• 30 grams of stationery glue, preferably transparent;
• one and a half glasses of water;
• dyes different colors(safer food);
• two small containers.

Step-by-step preparation:

1. Pour 1 glass of water with a temperature of 30 - 36 degrees into the first container, add a measured dose of borax, mix the mixture thoroughly until it becomes homogeneous.
2. The second vessel should be filled with the remaining water (0.5 cup) and glue, add 2-4 drops of dyes (it is better to choose two or three colors, no more). Mix until smooth.
3. Take the first container in your hands and, slowly tilting it, pour the mixture with tetraborate in a thin stream into the second container.

The transformation will take place right before our eyes: from liquid state all components will turn into one whole viscous substance. This slime is ready for various experiments that children love to do.

Only parents should carefully ensure that the child does not put the slime in his mouth. After all, the toy, although made at home, has a chemical composition.

From water and starch

For those looking for a recipe with more safe components, a handgam version without sodium tetraborate is suitable. There are several types of preparation of “hand chewing gum”.

Materials for the first method:

• potato starch- 200 g;
• half a glass of warm water;
• ½ teaspoon food coloring;
• enamel container.

How to do:

1. Pour starch and dye into a bowl and mix them.
2. Add water little by little to the mixture, stirring the contents constantly.
3. The liquid will change consistency gradually during the stirring process: from light jelly to elastic jelly.

Since there are no chemicals in this slime, the toy does not “live” for long. After two days it will become unusable and you will have to make a new slime.

For the second recipe for slime with starch you need to take:

• liquid starch, which is bought for washing, - 70 ml;
• white PVA glue - 25 ml;
• natural dye (you can use gouache paints);
• high density polyethylene bag.

How to make slime:

1. Pour starch into the bag.
2. Add 3 - 4 drops of dye, no more, so that during the game the paint does not end up on the child’s hands.
3. Pour glue into the mixture and tie the bag.
4. Shake it vigorously, mixing the contents, until a large clot appears among a small amount of liquid.
5. Drain the liquid, remove the viscous mass, blot it paper towel. Lizun is ready!

This handmade creation is suitable for play for 7 - 10 days if stored in a closed container.

Toothpaste manufacturing technology

This method allows you to make a particularly dense and viscous slime, and also relatively safe.

Required ingredients:

• gel toothpaste - 1 tube;
• monochromatic dye - 2 – 4 drops;
• sunflower oil - 10 g;
• small vessel.

Cooking steps:

1. Squeeze the contents of the tube into a container.
2. Add paint to the paste and mix until there are no lumps.
3. Place the vessel on low heat. Stir the contents for 10 – 15 minutes. The excess liquid for the toy evaporates, the remaining substance hardens.
4. Remove from heat, let cool.
5. Using oiled hands, knead the resulting lump thoroughly.

Shaving foam slime

This cooking method is especially popular with children, because the result is a dazzling white handgam.

Of course, fathers are not too happy about this waste of their razor supplies, but the end justifies the means.

For slime you need to take:

• sodium tetraborate - 17.5 ml (3.5 teaspoons);
• shaving foam - 50 ml;
• PVA glue - 30 ml;
• warm water - 100ml;
• 2 enamel bowls.

Cooking process:

1. In the first bowl, mix borax powder (one and a half teaspoons) and water (50 ml) until a homogeneous mass is obtained.
2. Add glue and shaving foam, mix thoroughly.
3. In a second vessel, dissolve 2 teaspoons of tetraborate in 50 ml of water until a homogeneous substance is obtained.
4. Slowly pour the solution from the second bowl into the first. Stir until the lump stops sticking to your hands.

From shampoo and salt

When using this method, the handgam is not too dense, a little runny. But such a recipe also has a right to exist.

For it you need to take:

• any shampoo - 4 – 5 tablespoons;
• non-iodized salt - 2 – 5 tablespoons (depending on the result).
• capacity.

The cooking method is very simple:

1. Place shampoo in a bowl.
2. Gradually add salt, stirring constantly.
3. When the mass thickens, the toy is ready.

Another method of making slime from shampoo requires dishwashing liquid. You need to take 150 ml of both components. For transparent slime, you should choose appropriate materials - without color.

Cooking steps:

1. Mix the ingredients in a bowl until smooth.
2. Place the container with the contents in the refrigerator.
3. Leave for 45 minutes - 1 hour, remove the finished slime.

Such a toy should be stored for more than low temperatures so as not to lose its ductility properties. Therefore, after playing, it is better to immediately put the slime in the refrigerator. Then they can play for a month or a month and a half.

Step-by-step instructions from flour

Even the smallest fidgets can use safe handgam in their games. It’s easy to make, and words can’t express how much joy such a toy brings to kids!

Ingredients for slime:

• flour - 2 cups;
• water - 0.25 cups cold and hot;
• coloring matter.

How to do:

1. Sift the flour through a sieve into a small container.
2. Add cold water, followed by hot water. Under no circumstances should you use boiling water, otherwise the slime will not work.
3. Mix all ingredients until smooth, carefully check for any lumps.
4. Add 2 – 4 drops of dyes and mix. It is better to use natural additives to add color from vegetable or fruit juices.
5. Place the vessel in a cool place (outside in winter or in the refrigerator) and leave for 3 – 4 hours.
6. The cooled mass must be taken out, kneaded in your hands - and it is ready for use.

How to make slime from PVA glue

Most recipes for this popular toy have PVA glue as the main component. It has the desired consistency, color, and also connects all the other components of the slime with each other.

I would like to highlight one in particular interesting way- magic slime. Such a toy will be attracted to a magnet, and with the help of special ingredients it will even glow in the dark.

For it you need to have:

• sodium tetraborate - 0.5 teaspoon;
• PVA glue - 30 g;
• water - 400 ml;
• food colorings;
• phosphorus paint - 2 g;
• iron oxide, you can take developer laser printer- 2 years

Cooking steps:

1. Pour borax powder into a container, add 200 ml of cold water, mix so that no lumps remain.
2. In a second container, dilute PVA glue with 200 ml of remaining water until a homogeneous solution is obtained.
3. Add dyes and phosphorus paint to the adhesive solution and mix.
4. Slowly pour the contents of the first container into the second container, stirring regularly.
5. It is not necessary to add the entire tetraborate solution; you should watch the consistency of the resulting mass. If it is normal, you need to stop connecting the components.
6. Add iron oxide to the resulting mixture and mix.

The magic slime is ready. Children watch with delight as the toy is attracted to a magnet and glows in the dark at night, like a firefly.

Plasticine toy

You can make another slime without glue, based on material that children always have in abundance. Plasticine handgams are easy to prepare and relatively safe.

For them you need to have:

• 100 grams of plasticine - can be one color or different;
• 15 g edible gelatin;
• 200 ml cold and 50 ml hot water;
• an iron bowl or other metal vessel;
• plastic container.

How to do:

1. In a metal container, soak the gelatin in a glass of water at room temperature.
2. After an hour or an hour and a half, put the pan on low gas, stirring, bring its contents to a boil and remove.
3. Stretch the plasticine with your hands until it becomes pliable and warm.
4. Place the soft mass in a plastic container, pour 50 ml of hot water, mix, trying to make the composition as homogeneous as possible.
5. Add slightly cooled gelatin to the plasticine substance, mix thoroughly without leaving any clots.

Place the mixture in the refrigerator for 30 – 45 minutes.
This slime can serve its owner for a long time.

What is necessary:

• actually, the pencil itself - 4 pieces;
• favorite component tetraborate - 5 mg (1 teaspoon);
• water - 100 ml;
• dyes;
• two containers.

Cooking steps:

1. Remove the rods (adhesive substance) from the plastic pencil case and place them in a glass container.
2. Place the container with the contents in the microwave. The time range depends on the process of converting the mass into a more viscous one.
3. Add food or natural dyes, gouache (2-3 drops each) to the resulting mixture, mix.
4. In another container, make a solution of borax powder with water.
5. Carefully combine both mixtures, stirring the contents vigorously.
6. Until then, it is necessary to pour the tetraborate solution into the glue until the composition of the desired consistency is obtained.

DIY transparent slime

Making slime that looks like a crystal stone is not as easy as previous options various “hand chewing gums”. But such a toy will become the pride of every child and the envy of friends and classmates.

To do this you will need:

• polyvinyl alcohol (water-soluble polymer) – 100 ml;
• sodium tetraborate – 25 g;
• plastic dishes.

How to cook:

1. Pour alcohol into a container.
2. Add borax powder to it and quickly start mixing the ingredients.
3. It is necessary to continuously stir the liquid for 10 - 15 minutes to achieve the desired effect. It gradually thickens.

The result is a dazzling glass slime.

You shouldn't play with it too often, because the created toy has enough high level toxicity.

Such an extensive list in various ways preparation allows parents and their children to make slime at home from scrap materials.

You can add additional components to the recipes provided: glitter, foam balls, beads, mother-of-pearl... Imagination will help you create new ones interesting options favorite toy. Also, to remove the characteristic smell of glue, you should use aromatic additives or essential oils.

In order for the slime to please children longer, you need to remember the rules for its use and storage:

• After playing, you should wash your hands thoroughly;
• Slime must be stored in an airtight container with a lid - a glass jar, a plastic bag, a plastic container;
• don't put the toy near heating devices, in direct sunlight;
• dried handgam should be put in water for a short time, it will be suitable again;
• you must try to ensure that the slime does not fall on the carpet or other surfaces with pile - this way it will quickly become unusable;
• Colored “hand chewing gum” leaves stains on clothes that are difficult to remove - you should be careful when playing.

Adhering to such simple rules, you can keep the slime in a condition suitable for play for a long time. This toy will definitely become one of the favorites of any child.

Reading time: 9 min

Today, about this funny toy, probably everyone has heard. For millions of children, interesting colorful chewing gum is one of their favorite toys. As it turns out, making slime at home with your own hands is quite simple.

We need to figure out what slime is and consider a certain number of options on how to make slime at home, with your own hands.

What is "Lizun"

Slime - that’s the original name for Lizun. The creators of the toy are considered to be Mattel. Date of birth of the toy: 1976 They started calling the toy Lizun in the 90s of the twentieth century, when the cartoon “Ghostbusters” was released. One of the cartoon characters was Lizun (ghost).

He was too similar to Slime: just as green, he could easily pass through walls. And on the surface, after it, there remained sticky mucus of a greenish tint.

One to one, just like Slime, slime is a soft jelly-like substance that can easily change shape, but does not melt in your hands. It can be both hard and elastic; if there is a sudden or strong impact, it sticks to the surface of the ceiling, flows down the wall, leaving an unattractive mark behind it. If desired, the toy can accept the most different shapes.

When the child has had enough of playing, the toy is placed in a jar. If stored in accordance with the rules, it can be used for a long time.

According to psychologists, the Lizun toy is a wonderful anti-stress. With its help, the baby can relax. His imagination will be busy. The child will grow up with a good imagination. In addition, with the help of Slime, motor skills and motor activity begin to develop well, and the nervous system is strengthened. Memory, vision, and attention are trained.

Slime is great entertainment for kids.

Children not only have fun playing with slime, but also get relief from stress. Nervous system receives a beneficial effect. The small muscles of the hand develop well during the game, as do motor skills.

The toy has a gel consistency. It cannot melt, but can take the most unexpected form.

In every store that sells toys for children, you can buy slimes. But you can make this toy yourself at home. Why not do this together with your child? It's not difficult at all.

This process will not take much time. It's too much here expensive materials and no tools are needed. It is worth considering those options that are affordable and interesting to do this interesting toy.

How to make slime with your own hands at home

The easiest way: starch slime

This recipe is simple and safe. This result is achieved because there is no boric acid, glue or detergents. If you make slime using starch, the steps of the process will be simple. All actions are easy to do for both children and adults.

What you will need (materials):

• potato starch (150 g);
• warm water (75 ml.);
• food coloring (2.5 g);
• You need to prepare a bowl and spoon to mix the ingredients.

Step by step instructions:

1. Pour starch into a bowl.
2. Add dye. Mix it with starch.
3. Slowly add water while stirring the mixture.

At first glance, at first, it will seem that the slime did not work out, and it is just a simple jelly. But when stirring continues for a long time, it will become visible how the liquid has become an elastic slurry.

You can play with slime, which is completely safe. For a child, the resulting toy is usually of interest for the first two days.

Then you will have to do everything again, in accordance with the recipe, to get a new slime.

Sparkling Slime made from PVA glue with glitter

To make slime using glitter, you need to have on hand:

• glue with glitter (100 ml);
• water (250 ml);
• borax (1 tsp);
• water (1 tablespoon)

Pour water into a glass. Stir borax in it. Shiny stationery glue is poured into a bowl. All. Here you will need 1 tablespoon of water. It is poured into a bowl of glue.

Mix thoroughly until the mass becomes flexible and pliable. After this, a borax solution is introduced and mixed to the required consistency to form a Lizun.

Slime without sodium tetraborate and without glue with detergent

If a trip to the pharmacy is not in your plans, but you want to make Lizun right now, this option is more suitable than others.

The manufactured Lizun, in appearance, is almost indistinguishable from the purchased one. Since the production of this type of Lizun requires the use of detergent, you will need to wash your hands thoroughly.

Need to take:

• dishwashing liquid
• bowl for mixing ingredients
• hand cream
• dye.

How to do:
In a ratio of 1:2, you need to combine dishwashing detergent with soda. Mix everything well.
Add hand cream. Stir the mass. How much glue is needed will be visible when the ingredients are mixed.
Pour in the dye.

As soon as all these components are mixed, you should pay attention to the mass. It should be slightly runny.
Slime that is not yet 100% ready should be put in a bag. Then, for 4 hours, put it in the refrigerator. As time passes, they pull out the toy and have fun with it.

How to make slime from shampoo

You can get a funny slime if you use ordinary shampoo, add dyes and polymer glue (“Titanium” is great)
Shampoo (100 ml) is poured into the container.
Pour in food coloring (1 tsp).
Stir.
4 tablespoons of glue are combined with colored shampoo.

The resulting liquid mass is poured into a bag and kneaded by hand to obtain the required thickness.
They take out the resulting substance. All! Shampoo slime for children is ready. Place it in a container with a lid to keep the toy there.

The most harmless - made from wheat flour

If you take flour, the fun will be absolutely harmless for children. What to do?

• Sift 2 tablespoons of flour through a sieve.
• Pour 50 ml of cold water on top.
• Then 50 ml hot (boiling water cannot be used).

• Mix the ingredients to obtain a homogeneous consistency.
• Pour in food coloring (3-5 drops).

• If desired, add salt or sugar.
• Stir the dough until the whole mass acquires one shade.
• Place in the refrigerator for 3 hours.

• They take it out.
• Knead with hands.

Slime made from alcohol and sodium tetraborate

Yes, this method cannot be called standard. But how interesting it is to make this toy! Just so that the result does not disappoint, you should not “deviate” from the recipe.

We need to stock up:

• Polyvinyl alcohol;
• Water;
• Sodium tetraborate (brown);
• Dyes (if desired).

It's not a problem to buy borax at the pharmacy. It is sold without requiring a prescription. The price of the product is low. It should be noted that polyvinyl alcohol is sold as a powder, not a liquid. This component is the most important in the recipe. That is why, in this case, neither vodka nor medical alcohol are suitable.

What to do:
Pour polyvinyl alcohol into a bowl (a little). Mix. Put on fire. Cook for 40 minutes. You must stir all the time. To prevent the mass from burning, the fire is kept low. After the bowl is removed from the heat, the mass should cool.

Preferably at room temperature. When the alcohol has been given the opportunity to cool, the other components are mixed at this time. Water is poured into the glass.

Pour in 1 or 2 tablespoons of sodium tetraborate. Mix everything thoroughly until the borax crystals are completely dissolved in the water.

After this, the resulting liquid must be filtered. Add alcohol (it will have cooled down by this time), in a ratio of 1:3. Mix well. If desired, add food coloring. You can use the toy!

Colored slime made from glue and borax with water

This method has gained popularity. A lot of different ways have been invented. And what ingredients are not used! You can consider one of the methods in detail.

Have to take:

• warm water(200 ml);
• a jar of PVA glue (or two);
• food coloring;
• borax (2 bottles).

Before you start working, shake the tube of glue. Then it is poured into a deep bowl. (You can also use ordinary glass jar use.)

You will need another bowl. There they mix water with dye and pour it into a jar of PVA. Mix all components until a homogeneous mass is obtained.

After this, boric acid should “go” into the mass containing the glue. As a result, you will see how the mixture will become viscous and dense in consistency. After viscousness appeared and the mass became thick.

It needs to be kneaded while wearing gloves. If you don’t have them on hand, then mix them in a plastic bag. Place the resulting slime on the leaf for half an hour or an hour. All. The child can play.

How to make from plasticine with gelatin

Plasticine, as a rule, is found in those houses where children live. It is this material that will be useful to make a popular toy. Everyone will be happy with the result!

What you will have to prepare from materials and tools:

• 1 pack of plasticine;
• 1 pack of edible gelatin;
• a spatula to mix the ingredients (or a spoon);
• jar or bowl for mixing;
• iron bowl to heat the gelatin.

How to do:
First, pour gelatin into an iron bowl. Fill cold water. Mix thoroughly. Leave for 60 minutes. How time will pass, you need to heat the gelatin that has been soaked. Bring to a boil, and immediately set the container aside by removing it from the heat.

You need to take a container (preferably plastic). Using a spatula, mix water (50g) with plasticine (100g).
Slowly add gelatin, which has already been prepared, into the resulting mixture. Mix with a spatula to obtain a plastic, homogeneous mass.

Place the bowl with the mixture on the shelf of the refrigerator so that the product completely hardens. After this, you can take it out and give the baby the slime.

Slime made from perfume and hand cream

If you use hand cream, it may turn out to be slime. But there is no 100% guarantee. But why not take a risk?

• Squeeze the cream into a bowl.
• Add dye. Stir.
• Add perfume a little at a time. The resulting mixture is stirred. It should start to thicken.
• Once the desired consistency is achieved, knead the toy with your hands.

Fun transparent slime

There will be no difficulties in making such a toy. To manufacture it you need to prepare the following components and materials:

• Transparent PVA glue (100 ml). It is sold in stationery stores.
• Boric acid, in powder form (1 tbsp);
• A bowl for mixing the ingredients;
• Wooden stick or spoon.

Step-by-step instructions for making it at home:

1. Pour glue into a glass jar.
2. Send boron powder there.
3. Mix thoroughly to obtain a homogeneous elastic slurry.

All. You can play with slime. Only the child needs to be told that he will need to wash his hands with soap after playing.

Simple toothpaste slime

What you need to have to make this toy:

• A tube of toothpaste.
• Cup.
• Food coloring.

Step-by-step instructions for making slime at home:
Squeeze a tube of toothpaste into a glass. It is advisable to buy either a gel or a thick paste. Send the dye into the glass. If you add more of this component, the shade of the slime will become richer.

To obtain a homogeneous mass, you need to thoroughly knead the mixture. You need to make sure that all the grains of dye dissolve.

Once you have a homogeneous mixture, you need to send it to water bath, about 15 minutes. This is quite enough. This needs to be done to remove excess moisture. As a result, the mass will acquire a dense structure.

You need to make sure that the slime does not turn out too dry. To prevent this from happening, it is advisable to smear your hands with oil and stretch the toy. The size of the slime will depend on the amount of toothpaste you use.

Slime made from soap and toothpaste

To make a toy, you need to stock up on:

• toothpaste
• liquid soap;
• dry dye;
• flour.

Step-by-step instruction:

Mix soap and toothpaste.

Mix the dye with flour. When adding flour, it is necessary to stir the mixture without stopping. If you take soap and paste in an amount of 20 g (of each component), then 5 tsp of flour will be enough.

When all the flour is poured out, mix the whole mass thoroughly so that the dough does not acquire a homogeneous structure.
It is advisable to pour in a little water. Then the mass is kneaded until the slime becomes viscous.

An easy way to make slime from hydrogen peroxide

Since the cost of making such a toy is low, this method has become very popular. But some people are disappointed because they were hoping for a different result. According to this recipe, the toy will be hard, but it will jump well.

You will need:

• 1 glass of water;
• 100 g starch or soda;
• 100 g PVA glue;
• hydrogen peroxide;
• dye.

You need a medium sized container. There you will need to mix water with soda (or starch), in equal ratio. It is necessary for the mass to form a jelly-like state. Then you need to pour in the glue. Mix well.

Hydrogen peroxide must be poured into this mixture. Add dye. Mix again. It should be noted that the slime eventually becomes airy precisely because of hydrogen peroxide. If it becomes clear that the mass is too thick, you need to change the proportions by adding more water.

Slime using washing powder

To make such a slime, you will need to use a liquid analogue of washing powder. There is no need to try using gel or liquid soap. The toy will not work, because the consistency will be different.

Before you begin production, you must have:

• PVA glue;
• liquid washing powder;
• food coloring;
• thin rubber gloves;
• container.

Manufacturing stages:

Pour PVA glue (1 cup) into the prepared bowl. You can pour in large quantity, or maybe less. This will depend on what size you want to make the slime.

Place 5-6 drops of food coloring in PVA. Stir until the mixture acquires a uniform color.

Take 2 tbsp. liquid washing powder. Pour into mixture. Mix the solution thoroughly. You will see how, over time, it becomes sticky. It is necessary to bring the solution to the state of putty. In the event that the solution is very thick. Drop by drop, you should add liquid powder to dilute the mass.

Wear gloves. Remove the solution from the bowl and start kneading it like dough. You need to get rid of excess drops of powder.

If this is not done, the slime will be similar in consistency to soft rubber.

It is necessary that the toy is stored in a closed container. When it becomes clear that the toy is losing its properties, it needs to be put in the refrigerator for three to four hours.

How to make slime from magnets

Magnetic slime is considered an original toy. He will be able to emit a glow in the dark. You can make this toy yourself at home.

• Neodymium magnets;
• boru;
• water;
• glue;
• iron oxide.

Pour 1 glass of water into a bowl. Add 0.5 tsp. burs. Mix well to completely dissolve the boron in water. A mixture will be needed to activate the second half of the composition.

Pour 1 cup of water into another bowl. Add glue (30g). Mix well. Pour in paint. To make the slime shine in the dark, it is advisable to use phosphor paint.

A boron solution is gradually poured into the glue mixture. At the same time, you need to stir the adhesive mixture all the time. At the moment when the mixture begins to harden and acquires the desired consistency, there is no need to add boron solution. What is left is poured out.

The resulting slime must be leveled on a table or board. Iron oxide (a little) is poured into the center of the toy. Knead the slime until it all turns gray.

The magnetic toy is ready. When the slime comes into contact with the magnet, it will crawl behind it.

DIY shaving foam slime

As is clear from the title, the main component in the manufacture of the toy will be shaving foam. The recipe is popular because it is simple.

You need to prepare materials:

• Shaving foam (150 g);
• 100 ml PVA glue;
• Medium sized bowl;
• Spoon for mixing ingredients;

How to make slime at home from men's shaving foam:

Pour glue into a container.
Gradually pour foam into it. The key word is "gradually".

When the slime has become viscous and elastic, this indicates that enough foam has been added. That's why 150g is a rough guide. The person making the slime must take control of the amount of foam.

The components are mixed until a ball is formed, the structure of which is dense. It shouldn't stick to your hands.

Then they knead the slurry until the structure becomes elastic. If the slime is mixed well, it will not stick to your hands.
If you want the toy to be bright and beautiful, add food coloring during the manufacturing process.

What to do if the slime doesn't work out

In the event that the slime failed to do so. As intended, all errors are easily corrected.

1. To give the toy elasticity, you need to add a few drops of vinegar. Then it will stretch better
   If you add a few drops of hydrogen peroxide, the mass will turn out more fluffy. This is usually done when making fluffy slime.
2. To make the slime slippery, you need to use glycerin.
3. A luminous toy is made using fluorescent paint.
4. When the slime is very soft, put it in a jar and sprinkle a little salt on top. Close with a lid. So the toy should stand all night. The toy will become elastic as the salt absorbs excess moisture.
5. When the slime turns out to be hard, you can soften the structure by placing the slime in a jar, adding water, and leaving it overnight under the lid.
6. To give the toy pleasant aroma, it is advisable to use essential oil, vanillin or food flavoring.
7. By adding tiny sawdust or iron oxide, you get a magnetic slime. The toy must be kneaded thoroughly to distribute the additive evenly. As a result, the toy will be attracted to any magnets.
8. An “anti-stress toy” will work if the mucus is in balloon. This is done using a large syringe without a needle.
9. In order to make the slime larger in size, place it in a bowl of water for 3 hours. Don't worry if it breaks into several pieces. Everything is according to the rules. You need to add a little body or hand cream and salt. Mix. The slime will become elastic and increase in size.

On a note! You can add foam balls of different colors to the toy. This will not only increase the size of the slime, but also make it bright.

Rules for caring for slime

The toy, which both children and adults are delighted with, sticks to surfaces and leaves no marks behind - this is the famous slime. It can be compared to thick jelly or jelly.

It is made using a jelly-like material. That is why, over time, it ceases to be elastic and attractive.

If you know how to care for your slime, you can extend its lifespan. It is necessary that the toy “be neat.” So that it would be pleasant to play with.

Where to store

For slime, you need to select a separate container with a lid. Store it on one of the refrigerator shelves. Storage in the freezer is prohibited.

How to care for slime

The main thing to follow is to make sure that the slime is not dirty. Slime has sticky properties, so small particles of debris easily stick to it. It is advisable that the toy should not be in places where there is dust.

For example, dust accumulates under the sofa. Do not allow the slime to come into contact with surfaces covered with lint. If the slime is dirty, remove the debris using alcohol. The second option is to remove it carefully using tweezers or a needle. You can also remove particles of debris with your finger, if possible.

Slime “doesn’t like it” if the air in the room is too dry, or vice versa – very humid. If the room is dry, it may become hard and lose its sticky properties. And if there is excess humidity, it swells and becomes more humid.

How to act in such a situation? What should I do to prevent the shape of the toy from becoming deformed? If there is not enough moisture, the slime will dry out. We need to save him by pouring a little water (5-7 drops) into his “apartment” (container). The slime will absorb moisture. This will help him recover.

If suddenly the toy becomes liquid due to excess moisture, using regular table salt. Pour a few grains of salt into the container. Cover the top with a lid. The “house” is shaken in the air.

To make the slime grow, pour a few drops of water into the container overnight. Close with a lid. Place it on the refrigerator shelf. You cannot store the toy in the freezer, otherwise the slime will become covered with frost.

When a toy is not played with for a long time, it may become moldy. If mold is found, it is advisable to throw away the slime.

Video: how to properly store Lizun

Let's talk about everyone's favorite toy - slime! A toy with such an unattractive name is a sticky-wet, jelly-like mass bright color and odorless. Slime does not mold like plasticine, although it has a certain plasticity, but it sticks well to surfaces, slowly sliding off them. This ability and its pleasant-to-touch texture have made this seemingly unremarkable mass one of the most famous inventions in the gaming industry.

The history of handgam

The ancestor of the substance known in the countries former USSR called “lizun”, was an acid-green slime toy produced by the Slime company.

The name "slime" stuck to slime after the release of the film "Ghostbusters" on television. The ghost after whom this jelly-like toy was named had a similar shape.

The beneficial effect of handgam on the development of a child

Another name for this sensational sticky plasticine is handgam, which translated means “hand” and “chewing gum.”

Scientists who have studied handgams claim that playing with them has a beneficial effect on the development of fine motor skills of the hands and can serve as a relaxing massage.

So, how can you please your child with such a wonderful toy that develops imagination and motor skills? Of course, you can go and buy it at almost any store, but it’s safer and more interesting to make it yourself.

How to make slime at home without or with it with your own hands will be discussed in our article.

Safety rules for making handgams

Before you learn about sodium tetraborate, let's familiarize ourselves with the basic safety rules, since failure to comply with them can be fraught with serious health problems:

Wear an apron (or clothes you don't mind) and gloves, as you will be using dyes during the work.

If you are making “smart” plasticine together with your child, be careful that glue and borax do not get into his stomach. If these ingredients are ingested, rinse and consult a doctor.

For the mixture of ingredients, use a container from which you will not eat food after the process is completed.

The shelf life of homemade slime can be from a week to two weeks, depending on the ingredients included in its composition.

After playing, be sure to wash your hands thoroughly.

How to make such a toy with your own hands at home? Slime without sodium tetraborate or with it is made in approximately the same way, as will be described below in the article. Safety precautions are the same for all methods.

Making “smart” plasticine from sodium tetraborate

There are many ways to make handgam yourself, today we will look at the most common of them.

Sodium tetraborate slime is considered the most durable. To increase its shelf life, strictly follow the manufacturing technology and choose the highest quality materials.

By the way, tetraborate itself is an antiseptic, so if a child drops a slime that contains this substance, you don’t have to worry.

You can buy borax solution at pharmacies, hardware stores, craft stores, and even at the construction market.

There are two ways to create handgam from sodium tetraborate - with water and without water. In the first case, your slime will turn out a little transparent, in the second - more matte.

Method without using water

Materials and ingredients you will need:

PVA glue - 1 bottle.

Wooden stick.

Cooking method:

Pour glue into the container (all or only part, depending on how many and what size slimes you want to get).

Constantly stirring the glue wooden stick, add borax solution 1 drop at a time until the mixture reaches the desired consistency.

Add a couple of drops of gouache or and mix thoroughly with your hands wearing rubber gloves.

Sodium tetraborate slime made according to this recipe can be washed with water if necessary.

Method using water

Materials you will need to make a toy like Slime from sodium tetraborate:

A glass of cold water.

PVA glue - 1 bottle.

Sodium tetraborate (aka borax solution), it is better if it is a solution in glycerin - a few drops.

Food coloring or gouache.

The container in which you will mix everything.

Wooden stick.

Cooking method:

Mix glue and water in a container at a ratio of 1:1.

Pour in a lot of dye.

Mix everything thoroughly.

Add two drops of borax solution and mix until smooth.

If the mass turns out to be too liquid, then add a little more sodium tetraborate.

Sodium tetraborate slime is stored in the refrigerator in airtight packaging. When your homemade “smart” plasticine hardens, add a little water to it.

If you want to get a transparent slime, replace the PVA glue in this recipe with clear stationery glue.

Slime, which contains glue and starch

If you consider a toy that contains sodium tetraborate to be unsafe and unsuitable for playing with a child, or you were unable to buy a borax solution, then your option is homemade slime without sodium tetraborate.

Materials required to make handgam:

Liquid starch for washing clothes (if you do not find starch in liquid form, dilute it yourself in a ratio of 1:3).

Food coloring or gouache.

Dense file.

Cooking method:

Pour 85 ml of liquid starch into a clean, dry file.

Add a little gouache or a couple of drops of food coloring to the starch.

Pour 30 ml of PVA glue into the resulting mixture.

Mash the mixture in the file with your hands, mixing it thoroughly.

After most of the composition has turned into a thick, slippery clot and some liquid remains at the bottom of the bag, remove the slime from the bag and remove excess moisture from it with paper or a cloth.

Lizun is ready.

If you see that the slime is too sticky or not at all plastic, it means you have calculated the proportions incorrectly (in the first case there is too much glue, in the second there is too much starch).

Remember that in addition to harmless starch, such a toy contains glue, so make sure that the child does not put it in his mouth.

It is important to know not only how to make slime without sodium tetraborate, but also how and how long to store it later: store it in a closed container at room temperature no more than a week.

Slime made from baking soda and detergent

There are a huge number of ways to create “smart” plasticine, similar in its properties to the world famous toy slime.

If your goal is a slime without sodium tetraborate and glue, then we have a couple more options, here is one of them.

Materials and tools you need:

Dishwashing liquid (like Fairy).

Baking soda.

Food coloring or gouache.

Wooden stick (a sushi stick works great).

Cooking method:

Pour 150 ml of detergent into the container.

Add 1 tbsp. l. soda

Mix the ingredients thoroughly.

Add as much water to the resulting mixture as needed to ensure that the resulting consistency suits you.

Add a few drops of dye (this step is optional, because often the dishwashing liquid already has a fairly bright color that is transferred to the slime).

Slime without PVA glue and sodium tetraborate is ready. Store it in the refrigerator.

Slime with the longest shelf life

As you have probably already noticed, all of the homemade slimes described above have a fairly short shelf life (no more than 2 weeks), this is due to the fact that they contain almost no preservatives or substances that will protect them from drying out.

If you want to make handgam with a longer shelf life, then we have such a recipe. The lifespan of “smart” plasticine, the manufacturing method of which we will now describe, is from 1 to 2 months.

By the way, for this recipe you will need very few ingredients, and you almost certainly have them at home:

Transparent bright color without granules.

Transparent shampoo with bright colors.

Mixing container.

Wooden stick.

Cooking method:

Pour 150 ml of shampoo into a container.

Add 150 ml of shower gel to the shampoo.

Mix the ingredients thoroughly and carefully, making sure no foam forms.

Place the container with the future slime in the refrigerator for a day.

This slime must be stored in the refrigerator, otherwise it will simply melt. As in all other cases, make sure that your child does not taste the handgam and wash their hands thoroughly after playing with it.

The safest slime

If all the above methods do not seem safe to you and do not inspire confidence in you, but you want to please your child, then we suggest you make a beautiful and interesting toy (slime) without sodium tetraborate and starch, without shampoo and dishwashing detergent, without glue and washing powder .

The shelf life of such a toy is not very long, and it differs noticeably from the original in appearance, but it is safe, and you can be sure that nothing will happen to your child, even if he puts handgam in his mouth.

So, here are the ingredients you will need to make safe “smart” plasticine:

Wheat flour.

Hot water.

Boiling water.

Container for mixing ingredients.

Fork or whisk.

Food coloring (you can even use beet juice or spinach juice, for example).

Cooking method:

Pour 4 cups of flour into a container prepared in advance, sifting it through a sieve.

Add half a glass of ice water to the flour.

Pour half a glass of boiling water there.

Mix everything as thoroughly as possible, the mixture should be smooth and without lumps.

Now it’s the dye’s turn: add a few drops to the mixture and mix everything again.

Place your future safe slime in the refrigerator for 3-4 hours.

The slime is ready, now you can rest assured about your child.

other methods

There are many more ways to make slime. Here are some of them: from washing powder, from a solution of borax and dry (but such handgam needs to be boiled), from plasticine and gelatin, magnetic, etc.

In this article, we tried to describe in as much detail and clearly as possible several completely different, but at the same time very simple ways making slimes. We hope we were able to answer all your questions.