How to make a metal hanger hook. DIY wall hanger. Hangers for children's clothes

A wall hanger is the first thing that visitors pay attention to when they cross the threshold of an apartment. This piece of furniture is designed to accommodate outerwear, hats, as well as things that are not convenient for indoor use, for example: an umbrella, a bag, sunglasses.

Classmates

Benefits of using a hanger

When planning to make a hanger with their own hands, craftsmen ask themselves the question: how to make it meet all needs and have an aesthetic appearance? Because the skillfully selected design of this product immediately immerses household members in the atmosphere home comfort and comfort. But the hallway space is not always conducive to placing huge and clumsy cabinets; sometimes a wall or floor hanger will fit better and more organically into the interior.

The main types of hangers depending on the fastening:

- floor - is a structure standing on the floor and which consists of an upper compartment where hats and outerwear are located, and a lower compartment intended for bags, umbrellas and other things;

- wall-mounted - is a structure made of boards with hooks, which is mounted on the wall. As a rule, wall hangers are combined with shoe cabinets;

— ceiling - this interior element is attached to the ceiling and has weight restrictions;

— mobile - this type of hanger does not provide for its fixed placement. It is used only as an addition to the main hanger. If necessary, you can always take out a mobile hanger to hang it on. outerwear or items that do not fit on the main hanger.

Tools needed to make a hanger yourself

Making a hanger in the hallway with your own hands is very simple. But before you start working on its manufacture, you need to ensure that you have the following list of tools and materials:

- sander;

- self-tapping screws;

- jigsaw;

— confirmats are a special connecting screw that is used to tighten wooden parts various products. Wide Application These screws were received in furniture production;

— or laminated chipboard;

— furniture edge- this is a material in the form of a narrow strip with which the end side is sealed wooden parts furniture.

Depending on your flight of fancy, the list of materials from which you can make a hanger increases.

Materials for making hangers

Today there are many both artificial and natural materials, from which you can make a hanger in the hallway. But at home, it is a wooden hanger that looks most organic and cozy. It is environmentally friendly as it is made from natural materials, durable and proper care- also durable.

Note!

The different structure of wood, as well as the use of special furniture dyes, make it possible to give the product almost any color.

In addition to wood, hangers are made of metal, plastic, and can combine several different materials. But such hallways are most often found in the premises of large corporations, international companies, etc., as they are more consistent with office style.

Stages of creating a hanger

Before you start work, you need to think carefully about what kind of hanger it will be, where it will be attached, you need to come up with not only original design, but also to new element The furniture also remained practical and comfortable. To do this, it is advisable to draw the product on a piece of paper, this will make it easier to see what the final result of the work done by yourself will be.

After completing the ideation stage, you need to make a list necessary materials for making hangers. At this stage, you need to decide what material the hanger will be made from, calculate how many consumables and basic materials are needed to make it.

Hanger diagram

Features of making hangers

When making hangers of any type, you must take into account that clothes can be different, large or small, children's or adults, fluffy or narrow. Therefore, to make the hanger more practical, you need to select different hooks for clothes, and it is also advisable to place them on different heights. In addition to clothes, it is customary to leave various things on hangers, such as Cell phones, bags or keys. To ensure that these things do not get lost, you can provide the necessary niches, a shelf or a special hook in the design for them, which will only be used as a hanger for keys or for bags.

Wall hanger

To create a simple wall hanger, use ordinary boards, which can be purchased at any hardware store or supermarket. The process of creating a wall hanger looks like this:

1) Purchased boards are carefully sanded and cleaned using sandpaper or a grinder;

2) Then the surface of the boards is primed with varnish on water based;

3) In order for the surface to be smoother, when all the boards are dry, cleaning can be repeated;

5) Then, once the boards are dry, use a screwdriver and self-tapping screws to connect them together. This creates the base for the hanger;

6) Then, to add more functionality to the future hanger using special glue a mirror is attached;

7) As a rule, all wall-mounted wooden hangers are made with upper shelves for placing hats. For this purpose, pre-prepared boards are screwed using confirmations to the base of the hanger;

8) Well, the last final stage is attaching coat hooks to the frame of the product.

floor hanger

Most often, such a hanger is made of laminated chipboard or chipboard. This gives an advantage in choosing a color, since the variety of shades of such wood materials is very large. In order to beautifully and correctly make blanks for future hangers, special furniture machines are needed, so it is recommended to contact any furniture workshop, where they can quickly and efficiently cut a wood board, as well as glue an edge to its end sides. Then the ready-made basic elements can be connected together using a screwdriver and confirmations in accordance with the layout. And at the very end, attach hooks for clothes. And the DIY clothes hanger is ready.

Special hangers

As noted above, in addition to clothes, hangers in the hallway are also used to place various wardrobe items and accessories that should always be at hand when going out into the yard. Therefore, it is also important to provide special places in the design of the hanger where you can put or place various small and not so small items, for example: glasses, keys, umbrellas and, probably, one of the main elements of a woman’s wardrobe - bags.

Note!

Bag hanger is necessary element Any hallway, as a rule, is located at some distance from the place where the clothes are located, so that, if necessary, there is uncluttered access to the bag.

It is also advisable to place keys in a special secluded place on a hanger so that to a stranger it was difficult to find them, and the owner always knew where they were.

DIY hallway hanger video:

See inaccuracies, incomplete or incorrect information? Do you know how to make an article better?

Would you like to suggest photos on the topic for publication?

Please help us make the site better! Leave a message and your contacts in the comments - we will contact you and together we will make the publication better!

According to the great director, theater begins with a hanger. But is it only theater?

It is difficult to imagine any home - be it a cozy apartment or a spacious cottage - without this integral attribute of our life.

A coat rack on the floor, hooks on the wall in the hallway, hangers in the closet... They have one role: to keep our things in neat condition.

However, people with a rich imagination are able to turn this boring piece of furniture into almost a work of art. A simple set of tools for work, patience and a couple non-standard ideas– and you are the owner of a unique thing.

Hanger as part of the interior

The main thing in any home is a spacious closet. It combines blouses and dresses, trousers and skirts, gloves and scarves, coats and raincoats.

A good housewife has every thing in its place. The clothes in the closet are different. And the hangers for it should also be different.

How to make a hanger with your own hands? Believe me, it's easy and even fun. Rifle through the chest of long-forgotten grandma's dresses. You will find amazing things there.

Antique hangers (the so-called hangers) can be restored, and they will turn into the main decoration of your closet.

In the old days, coat hangers were made of wood. Using one of the decorative techniques, you can give an old thing new life. And what a life... You will want to hang such beauty on the wall, and not in the closet - and let everyone admire it.

You can transform a clothes hanger using decoupage, unusual coloring or appliqué.

The soft hangers are very comfortable to use. Things on them keep their shape and do not slip off. You need to wrap ordinary trempels with thin foam rubber, and then cover them with a nice fabric. Beads and ribbons will give the new thing a special charm.

How to decorate your home with a wooden hanger self-made more difficult. Woodworking requires special skill. And special tools are needed here.

Wooden wall hanger

Wall hanger is a simple design. However, its manufacture should be approached with the utmost seriousness - then it will serve you for a long time.

The main key to success is strong, dry wood without cracks. A piece of timber or a board is perfect. The length of the workpiece depends on the length of the future hanger. Before starting work, it would be a good idea to treat the wood with an antiseptic.

Panel fastenings are arranged on the board in one, two or three rows as desired.

Such a hanger belongs behind the door in the bedroom, as well as in the bathroom, pantry or bathhouse.

Accuracy is cultivated from childhood. Equip your children's room with a simple hanger. And if it is decorated with images of favorite cartoon characters, the child will be happy to take care of his clothes.

Note!

Do not attach the hanger directly to a plaster wall. Otherwise, you risk “whitewashing” your clothes. And a jacket or raincoat that gets wet in the rain will leave unsightly stains on the surface of the wall. To avoid this, you need to attach a sheet of plywood under the hanger, thick paper or polyethylene.

Panels for hooks can be given any shape - waves, ovals, hearts, suns, etc.

Attention! Using untreated wood is dangerous big amount splinters. Don't forget to polish the hanger panel.

Use empty spools of thread or ready-made hooks of any shape as fastenings.
And if you turn on creativity, dried twigs or plant roots will be used. Trim them, remove the bark, sand them, varnish them - and here you have the hooks. You definitely won't find these in the store.

A simple wall hanger can be made from ordinary wooden planks. Nail them parallel to the wall - this is both a basis for fastenings, and protection of clothes from whitewashing, and interior decoration.

Note!

Of course, you can’t make such a hanger in half an hour. But the end result of your labors will be a real hanger. All that remains is to attach a shelf at the top for storing hats.

DIY hallway hanger

A good hallway hanger should be durable, beautiful, and at the same time as spacious as possible. In the limited space of the hallway, outerwear, shoes and numerous accessories should fit.

This should not be forgotten when designing a hanger. There should be enough compartments and shelves near the hanger in the hallway to accommodate everything you need.

Attention! When marking, consider the size of the wall on which you will place the hanger.

For standard apartment A hanger of this size is quite suitable: width - about 1 meter, height - slightly more than head level. Fastenings for clothes are placed on the panel in 2-3 rows.

Note!

A shelf for hats is needed at the top of the hanger. The strength of the structure will be given by the slats.

They are attached to the sides of the structure, connecting the shelf to the panel at an angle of 45 degrees. It is best to secure the hanger to the wall using dowels.

DIY wardrobe hanger

Making a hanger hanger with your own hands is very simple. There are many ways to make such hangers. You will need: large section wire, branch cuttings of a suitable shape, small plastic bottles, placed on a wire base, bent at the desired angle metal bar or plate.

Wrap the base of the hanger with thin foam rubber or other similar material. Then choose a fabric that matches the color and sew around the base. Give the resulting cute little thing some charm with ribbons, beads or lace.

If the hanger is intended for a baby, decorate it with a funny face or applique. Pick a hook and hang it in the closet.

Floor hanger rack

You can solve the problem of placing clothes in spacious rooms with the help of floor hangers. Floor hangers are commonly used in reception areas of various institutions.

These interior items are made from metal pipes. A floor hanger is a universal thing. You can place almost anything on it. Except, of course, shoes.

The disadvantage of a pipe hanger is its instability. If things are placed unevenly on it, it may fall.

But the floor hanger can always be rearranged Right place or even hide it in the closet.

This type of hanger is rarely used in residential premises: it takes up a lot of space and poses a danger to children. Nevertheless, it is quite possible to make a floor hanger-rack yourself. The materials usually used are:

• for support - an artificial spruce cross, couplings plastic pipes, swivel mechanism broken swivel chair;
• for the rack - cuttings of plastic or metal pipes, trunk small tree, shovel handle, camera tripod, floor lamp “leg” and other suitable parts.

Attention! The main thing in floor hanger- its stability.

Unusual homemade hangers

A hanger can be made from absolutely any material or object. Sounds incredible? Don't believe me?

See for yourself:

• Scraps of steel wire, tubing, or angle iron are perfect for the job. Welding can be used to connect parts. And if the metal is flexible and soft enough, just bend it with your hands. The choice of form is yours.
• The design made of plastic pipes will appeal to fans of high-tech style.
• If you like working with wood, this idea is definitely for you. From leftover wood of any thickness you can make a practical and multifunctional hanger for the hallway.
• The simplest hanger can be twisted from wire. Attach clips to the edges of the resulting hanger - now you have a convenient thing for placing skirts and trousers. Experiment with the shape of the hanger - this can become the highlight of your product.
• The idea of ​​a “hunting” life is the good old antlers of a deer or elk. Attaches to a suitable base and can be used as a wall or floor hanger.
• It's no secret that many of us (especially men) prefer an ordinary chair to a spacious closet.

Shirts, jackets and even trousers are often hung on the back of a chair. Why not turn the back of the chair into an original hanger for those same shirts and jackets? This design can easily fit the entire suit.

Homemade hangers in the form of rings are quite suitable for storing belts, waistbands, and ties.

Hanger as home decoration

Before you start making or decorating hangers, think about what style prevails in the interior of your room or hallway. After all new thing should fit perfectly into the already existing interior. Here are some examples:

• Soft trempels covered with linen or knitted fabric in bright colors will fit perfectly into the decor of a country-style bedroom.
• Bright hangers with a “doll” design are suitable for a teenage girl’s room in the Barbie style.
• A luxurious hanger with twisted elements will decorate a boudoir in an oriental or palace style.
• A wooden hanger with carved patterns will emphasize strict style office or hallway in a classic style.
• Antique, artificially aged or skillfully restored hangers will add a special charm to a retro-style room.
• A hanger decorated with rhinestones, beads, bows and other shiny little things will look harmonious in the bedroom of a glamorous lady.
• Structures made of metal or plastic parts, simple and unpretentious in shape will decorate a room in a techno or hi-tech style.
• Simple in shape and laconic in design, hangers will complement a minimalist interior.

DIY photo hangers

When we come home, the first thing we do is take off our outerwear and hang it in the closet or on a hanger. Last option has some significant advantages: it takes up little space, provides quick access to things, is easy to install, suitable for corridors various forms and sizes.

Thanks to the simplicity of the design, it’s not at all difficult to build a hanger in the hallway with your own hands.

Advantages of self-production:

• N low cost of the product;
• IN opportunity to achieve the best combination with interior;
• AND individuality of the hanger: your friends and acquaintances will not have one like this;
• R academic work is highly valued.

Original wall hangers in the hallway are an important and integral element of the interior.

Before starting production, you need to analyze the shape of the corridor. If it is quite elongated, it is better to give preference to a long hanger with compact shelves or without them at all. For large rooms, you can choose any model.

It is also worth considering the features of the interior: style, details, predominant colors.

The simplest type of coat rack is a wooden board with hooks attached to the wall. It is allowed to have a shelf for hats, sides located above or below it. The basis of the design can be taken as a homogeneous large wooden plank, and several smaller ones, fastened together.

IN traditional version execution wall hanger It is a bar on which hooks and pins are located.

If you want to show your creativity, you can make a custom model. For example, you can make an excellent hanger for a nursery if you create a blank in the shape of a cloud, tree or twig. For the corridor, it would be better to cut out something else: antlers, a fence or an inscription.

Wall hangers in the hallway and coat hooks are selected according to the interior style of the room.

Materials and tools

Nowadays, in almost every hardware store, the buyer is provided with such a rich assortment that it is possible to purchase everything necessary to create a wooden hanger with your own hands in as soon as possible, will not be difficult.

DIY wall hanger for the hallway - simple work happy with the result.

To do this, you should buy or prepare the appropriate tools:

• Jigsaw
• Hacksaw;
• Blowtorch;
• Sandpaper;
• Screwdriver or hammer;
• Awl;
• Pencil;
• Roulette.

Tools that will come in handy at work.

Materials you will need:

• A piece of wooden board;
• Screws;
• Hooks.

Materials for future hangers.

For decoration:

• Primer;
• Paint brush or roller;
• Varnish or other coating;
• Blanks for decoupage, scissors, glue, textured sponge.

Materials for decorating hangers.

The process of making a hanger

A classic hanger made by yourself for the hallway does not require significant effort. Manufacturing takes minimal time. Initially, you need to think through the design in detail; it is recommended to make a drawing on graph paper and calculate the consumption of materials.

You need to transfer the drawing using a pencil or marker.

Then you should get wood sheet(or board) and place it on stable supports so that there are a few centimeters between it and the surface of the floor or table. Armed with a jigsaw, cut out the blanks of the required shape, following the contour. If you want to make the edges embossed, you need to go over them with the same tool.

It is necessary to handle the roughness, sand the cut areas and sand them.

Next step - giving the desired appearance. To fire the boards you will need blowtorch, which is successfully replaced by a gas burner. On at this stage Care must be taken not to injure your fingers or damage the material. Then you need to get paint or varnish and cover all the sawn parts.

After drying, the product is assembled using screws.

The mounted method involves mounting small metal strips round shape, called "ears". Holes are drilled in them for fastening into dowels with screws. Moreover, reliability is determined by their length.

A DIY wall hanger can be attached in several ways.

Another, no less popular method is making through holes. After they are created and processed, screws or nails with a long stem are passed through and the hanger is attached to the wall.

For fastening, as a rule, screws or small nails are used.

To complete the work you need to attach metal hangers. They can be arranged randomly, in one or several rows.

Fixation is possible with the following devices:

• "Suckers";
• Adhesive strip;
• Magnets.

Such methods do not cause difficulties and take little time. In this case, the fastening is not very reliable and is only suitable for hats.

Any brave design options will favorably emphasize the relevance and originality of the interior.

Making a hanger from longitudinal and transverse boards

This design resembles a lattice and involves making a base attached to the wall from horizontally and vertically arranged elongated boards. In this case, two layers can be roughly distinguished: the first- with transverse arrangement, second- with longitudinal.

Drawing of a wall hanger with dimensions.

To create a wall hanger with your own hands, you will need to stock up on several long boards. It is better to give preference to lumber 10-20 cm wide and 1 m long. Having decided on the size, you should obtain the required number of blanks.

How to assemble a hanger.

After which it is necessary to process them so that there are no bulges, chips or roughnesses, paying particular attention to Special attention edges. Then you need to first lay out the first layer, maintaining parallelism and the same distance between the planks. If everything is satisfactory, it's time to move on to the second level. Armed with a screwdriver (or, if you don’t have one, a hammer), fix their position at the intersection points.

A simple hanger option for making yourself.

The hooks need to be attached to the top boards. If they have vertical position, then it is better to place the hooks in the upper part in one row. For hanger, outer side which is formed by vertical planks, you can create several levels by attaching hooks to each of them.

Dimensions of hanger with shelf.

Decoration

You can complete the production by giving the product an original appearance. The most interesting surface will be if:

Before you begin applying the coating, you should clean the wood from traces of dust, dirt and grease.

DIY materials for decoupage hangers.

We need to prime our wooden hanger with white acrylic paint.

Glizal is a transparent paint that, with certain efforts, forms textured surface. Before starting work, you should dilute the glisal with water according to the instructions. Then the mixture is applied to the prepared workpiece and a pattern is created using a textured sponge. You must act quickly, otherwise the coating will harden in half an hour. To artificially age wood, a type of varnish called craquelure is used.

It is applied to a pre-painted surface, which as a result becomes covered with small cracks.

Decoupage allows you to create wooden crafts, suitable for any interior. Most often they resort to it when they want to get furniture with an antique effect and complex patterns. To decorate such a hanger, you will have to arm yourself with scissors and blanks with a pattern.

Having cut out paper patterns, it is better to lay them on the surface and evaluate how they will look.

If everything suits you- Spread the wrong side with glue, apply it to the wood and level it so that bubbles do not form later, then cover it with furniture varnish and leave until completely dry.

Which finishing varnish you choose is up to you. After the varnish has dried, screw the handles into place.

If you have artistic skills, you can apply a drawing acrylic paints. Initially, the background and large elements are created, then the details are drawn. To finish work better by application varnish and craquelure.

VIDEO: Stylish hangers for the hallway.

You can do without a hanger in the hallway or corridor only if you have a large closet, and even then not always. In private homes, it is more convenient to have “duty” clothes on hand - to jump out into the yard. Those that are mounted on the wall are more convenient: they take up less space. One thing is not encouraging: the prices for worthy specimens are considerable. Therefore, we will tell you how to make a wall hanger with your own hands. The models are different, different techniques are used, but they have one thing in common: they are easy to make, especially with detailed photos process and explanations. There are also diagrams and video tutorials.

From boards in the form of a tree

To our small hallway need a hanger. I don’t want to buy a regular one in the form of a bar with hooks - I don’t really like them, and my little daughter won’t be able to get them. Other options with a set of parallel boards are also not inspiring. There is a switch on this wall, so it won’t work without adjustment, and it’s not clear what it will look like. Therefore, it was decided: I make a wall hanger with my own hands in the shape of a tree - trunk, branches. It fits into the interior. I will treat the wood with stain and water-based varnish, the color should be close to the color front door.

So, two were purchased at the sawmill unedged boards 25 mm thick. There are markings on them - on one there is a trunk, on the other there are branches.

We take an electric jigsaw and cut out the blanks along the marked contours. Next is a turn of very dusty work - we sand the wood, while simultaneously adjusting the thickness of the joints with the “branches”. We used a drill with a rubber attachment and sandpaper. First the coarse grain, then the medium and fine grain.

Sanding is a dusty business

Once the result was satisfactory - it became smooth and the grain of the wood was clearly visible - it was time to stain. This is a mahogany color applied in four layers. After drying, we coated everything with water-based varnish. Three layers were applied at intervals of three hours.

200 mm nails were used as hooks. They were cut to the required length (they were different - longer for the top of the hanger, shorter for the bottom). The caps and rod were sanded for smoothness, and threads were cut on the lower part to the thickness of the board (25 mm). Holes were previously made in the “branches” and “hooks” were screwed into them.

Now all that remains is to fix all the parts on the wall. The walls are concrete, so we fasten them with dowels. First we attach the barrel and drill holes through it. Set aside the wood for now and insert plastic plugs for the dowels into the holes. Having placed the “trunk” in place, we screw it. Using the same technology we attach the “branches”.

It turned out well, and the color matches the door almost exactly. There are plans to build small shelf for shoes and bags. The entire cost of making this hanger was about $6 for the boards and $2 for the nails, about the same amount was spent on the dowels. There was stain and varnish, and the consumption was small.

Simple wall hanger made of laminated chipboard

The task is to make a cheap clothes hanger on the wall (for rented apartment). Two boards of wood were purchased from a hardware store. laminated chipboard() entitled " furniture board" Two, because the price turned out to be low, and in the accessories department, where they were looking for hooks, they found some good brackets for very little money. We will use them for the second board - we will make a shelf for small items.

The tools you will need are a screwdriver or screwdriver, a drill, and a set of drills. Also, use a tape measure and a pencil to mark the places where hooks and brackets are attached.

After unpacking the boards, glue stains and some other incomprehensible stains were found on them. All this can be eliminated with a solvent. Take a soft white (not colored) rag and wipe everything well.

Next, mark with a pencil the places for the screws. Remove the hooks and drill holes. Drill - 1-2 mm smaller in diameter than the diameter of the self-tapping screw. The hole is necessary so that the work goes easier, and also so that the surface does not crack when twisting. We put the hooks in place.

Now it's the turn of the shelf. I set aside equal distances on one side and the other, attached the brackets, and marked the holes for fastening. Drilled holes and installed brackets. All.

Now we attach it to the wall. The technique is the same, but with dowels: apply, mark the attachment points, drill. The drill is the size of the dowel. We insert the dowel plug into the hole, attach the hanger/shelf to the wall, and fasten it.

This DIY wall hanger was made in two hours (including the shelf).

Hanger with shelf

You can take the idea as a basis and use any other “hooks” and stops. This DIY wall hanger is made from two 25mm planed boards, two carpenter's squares and five hammers.

The wood needs to be dry, otherwise cracks may occur. Instead of squares, you can even use triangular pieces of a similar board. Important condition- Availability right angle. And instead of hammers, you can even fasten knots or, for example, cut wooden hangers, or any hooks. This option is just a gift.

Spare parts - hammers and squares

The two boards must be the same length. An exact match is important. Having adjusted the length, we process sandpaper the edges. There is a drill - we take the attachment, attach the emery and sand first with coarse grain, then with medium grain. Then we start marking. First, we mark where the stops will be attached. We divide the remaining distance by six, put marks - there are five of them. Just according to the number of “hooks”.

We mercilessly cut off the handles on the hammers. We cut it slightly diagonally to create a slight slope.

Using a drill, make holes in the center. The diameter of the drill is 1-2 mm smaller than the fastener used, the depth of the hole is no less than the length of the self-tapping screw.

The two boards must be connected at right angles. The installation step of the screws is 10-15 cm. We mark the places on the sidewall and transfer them to the end. High accuracy is required. We apply one to the other and transfer the marks with a finely sharpened pencil. We make holes according to the markings.

Drilling holes

We fold the boards at an angle of 90° and connect them with self-tapping screws. First we twist the two outermost ones, then the one in the middle, and then all the rest. The length of the screws is at least 75 mm (triple the thickness of the board).

Using the markings, we drill holes for the hooks.

We install angle stops. Since carpenter's squares were used, there were no holes in them. They were drilled - two at the top and bottom on each plank. There are 8 screws on one stop. We take them small - more than 20 mm, so as not to puncture the wood. Because they are required a large number of.

The wooden wall hanger is ready. All that remains is to paint it and hang it on the wall.

Based on this homemade hanger, other versions were made.

With more voluminous shelves

Video lessons

Several simple homemade hangers for the “handy” in video format.

Drawings and ideas for DIY

A simple hanger option for making yourself

We come home and take off our outerwear. To keep it from lying around, we hang it on a hanger. This way, clothes don’t bother us and don’t create chaos in the apartment. You can always quickly find a jacket or coat by looking where all the clothes hang. If you have a small hallway and there is nowhere to put a closet, then a hanger will solve all the problems. This attribute It happens different sizes. Therefore, you can choose a hanger, despite the size of the hallway. Their designs are varied, but you have the opportunity to make a hanger according to your own sketch.

Hanger necessary thing, if you often have guests. Guests can hang their things on it when entering your corridor. Hangers are usually located close to the front door, so as not to walk around in shoes throughout the hallway. Now their variety is great. Finding a suitable hanger that fits into your interior is easy. You can make it yourself using an individual design.

For a hanger to perform its functions, it must be:

• Convenient;
• Light;
• Reliable.

You have decided to make your own hanger. Then you need to know in advance what it should be. You need to remember what the hallway walls are made of.

If the walls are made of plasterboard, you should think about a floor hanger. Then you won't have to mount it on the walls. Mounting a hanger on plasterboard walls is difficult.

Installation on such walls involves the use of special equipment, tools and dowels. Such a wall may not withstand the load from a large number of things, then the hanger will fall.

Floor models have several hooks. If you hang things evenly on it, it will not fall. This attribute has light weight and it can be moved to a new location if necessary.

You can make a hanger with your own hands from simple materials: wood, fiberboard or chipboard. Then decorate it beautifully - paint it or apply a suitable design/ornament.

The most common material for making hangers is wood. It is easy to make a certain shape from it.

Birch is not the best best material for making hangers. Wood has a fragile structure, so when screwing in fasteners, there is a high probability of damaging the finished product.

Almost everyone has the materials you need in their home. A set of tools and materials for work: jigsaw, hacksaw, sandpaper, hooks, screwdriver, boards.

Take the boards the right size. You process the wood: you sand it. Then go over the entire surface with sandpaper until it is perfectly smooth.

You can decorate according to your taste. You can cover the boards with varnish or paint. Attach the hooks to the board using a screwdriver.

For fastening finished product There are two types of wall mounting:

First: You can attach the hanger to the wall by drilling through it.

Second: With reverse side Make hangers into loops and then hang them on nails.

The hanger is ready and can be used for its intended purpose.

We make original hangers for the hallway with our own hands

The hallway is the first room in the apartment. Therefore, guests pay special attention to it. You can add an original hanger to the interior of the corridor and make it yourself. This will attract the attention of people who decide to come to visit you. And you will place all their things on the original hanger: clothes, umbrellas, bags and various accessories. Transforming your hallway and making it beautiful is easy, quick and inexpensive.

Any person in the house will have unnecessary things that can be used to make a hanger. Boards, skis, boxes, old furniture, - all this can be used as the basis for an original hanger.

You should attach hooks to the skis, screw the entire structure to the wall - the hanger is ready for use.

A clothes hanger can be:

• standing;
• Wall-mounted;
• Consist of separate hooks.

For classic design In the hallway of the room, a wooden or metal hanger in discreet (natural) colors is suitable.

An original solution is a hanger consisting of separate hooks. They hang on the wall itself. Hooks may have interesting shape, color and design. For example, in the form of raindrops arranged in a chaotic manner. You can attach the hooks yourself without using additional tools.

What are hangers and hooks used to attach?

Hangers and hooks have several types of wall mounting. You can attach them to the wall yourself without using special equipment or by applying it. For wooden hangers metal hooks are suitable. They are fastened with additional fastening - screws.

Hooks for hangers may have next type fastenings:

• Suckers;
• Special adhesive strip;
• Magnets.

All three types of fastenings that the hooks are equipped with do not require much effort and time to install.

It is worth remembering that these types of fastenings may not support heavy clothing (fur coats, down jackets). These hooks are used to hang hats.

How to choose the right hanger for the hallway

Before purchasing or making a clothes hanger, you should keep many things in mind. Need to take into account free area and the design of the hallway of the room, where to put the hanger or at what height to hang it.

Tips for choosing a hanger:

• It should be in harmony with the design of the room;
• For lovers of minimalism, floor-mounted suit models are suitable;
• For classic style wall-mounted models are suitable;

The floor hanger is lightweight. It can be quickly moved or removed. Many people choose this type of hanger for their hallway.

How to make a hanger in the hallway with your own hands (video)

Every apartment should have a hanger in the hallway. It is a practical attribute in the interior. Occupies less space than cabinets. Can hold a large amount of clothes. Each item hangs on a specific hook, and you spend less time looking for it. Everything you need to take with you outside - a bag, an umbrella, a hat, a scarf and a coat - can be in one specific place near the front door. Therefore, it is worth thinking about purchasing or making such a wonderful device for your hallway room.

Design a hanger for the hallway with your own hands (photo examples)