How to make and install an accordion door - step-by-step instructions and drawings. Do-it-yourself accordion door: step-by-step instructions and interior screen, how to make folding wardrobes, video Do-it-yourself accordion sliding doors

Now there is a huge number various types doors that are installed inside the home. They are made from a variety of materials and have both their advantages and disadvantages. IN last years, the accordion door has become quite popular and in demand.

This demand is primarily due to numerous positive qualities, which we will consider below. You can easily buy such a door ready-made in any specialized store or order it from a workshop.

But if you wish, you can easily do it yourself. To do this you only need some tools and necessary materials and desire.

It will be indispensable as a screen to fully carry out zoning of the room. Let's look at how to make an accordion door with your own hands.

The door design is not complicated at all. It includes several parts, ranging from 10 to 15 centimeters wide.

The design is somewhat reminiscent of blinds, but the fastening is done using slats, vertically.

When such a door opens, its parts begin to move along the guide, attached from below and above, and eventually fold up against the wall, resembling accordion bellows.

This one has many advantages.

Positive aspects of an accordion door:

• Easy to manufacture. Anyone can make it if they wish. It won't take much time or effort.
• It is very compact. This property is indispensable for small apartments With narrow corridors. By installing such a door, you will be able to save a lot of free space.
• For manufacturing you will need the simplest tools and materials
• This door is versatile. It opens easily in the direction you want.
• If necessary, the width can be quickly and easily changed. To do this, you just need to add or remove a few parts.
• The accordion door is equipped with a special latch. This is necessary to avoid accidental opening. The latch is installed directly on the guide.
• the accordion opens and closes almost silently.
• If the door is made of moisture-resistant materials, for example, plastic, it can be installed, for example, in bathrooms or shower rooms. They will look great in them and, due to their compactness, will save free space.
• The door cannot be opened by drafts, thanks to the mechanism installed on it.

That is, to summarize, the accordion is compact, perfect for the interior of any room, and if it is in the folded position, it is almost invisible. Thanks to large selection flourishing, you can easily find exactly the one that is most suitable for you and which will best fit into the interior of your house or apartment.

But, at the same time, the accordion door also has some disadvantages. This is, first of all, a short period of use and poor resistance to various impacts. If you accidentally touch it, you can easily damage this structure.

As we see, numerous outweigh the existing shortcomings of the door. This has a positive effect on its popularity and demand.

Required materials

Most often, doors are made of chipboard. It has such positive qualities as excellent sound insulation, resistance to regular exposure to moisture and good heat retention. We will conduct a master class on how to make an accordion door with your own hands and what materials are needed for this.

In the video you can see about the accordion door in interior design:

If you intend to make it yourself, you can use the following materials:

• Quite often such doors are made from. This material is environmentally friendly, durable and strong. But a lot depends on the type of wood. If you are going to use coniferous varieties, then you will need to open the surface with varnish and apply a special antiseptic substance to it. All this will increase the operating time of the door. But wood has poor resistance to moisture and should not be installed in bathrooms and showers, as it will quickly become unusable.
• MDF is very suitable due to its numerous beneficial properties. First of all, it is light in weight, has good strength, and is resistant to fire and moisture. In addition, this material is environmentally friendly. By installing an accordion door made of MDF, you can rest assured that all sorts of bacteria and mold will appear on it.
• Chipboard is quite durable, but relatively cheap. If you intend to make an accordion out of it, then do not forget to apply veneer on top. This material is perfect for installation in rooms where it will be regularly exposed to moisture. But you may have problems when attaching the loops - twisted in Chipboard screws They don’t hold up very well and often, over time, pop out.
• Glass is often used for accordion doors. But what is required is strained glass. The door can be installed in any room. It will fit perfectly into almost any design. But it is quite difficult to process tempered glass yourself, and if you decide to buy ready-made glass, be prepared for the fact that its price is quite high.
• Plastic is different for a long time operation and low price. Having made a door from PVC slabs, you can be sure that there will be no scratches or cracks on it. Plastic is highly resistant to moisture. It has good soundproofing properties and perfectly retains heat in the room.

If you intend to make an accordion door yourself, then you should choose the material depending on the room in which you intend to install it and being guided by your financial capabilities. You can easily find everything you need in specialized stores.

In addition to the material, to install the door you will need fittings, which include frames, hinges, carriages equipped with runners and stoppers. All these parts are also very easy to buy.

Also, don't forget the PVC edge and screws. All this is easy to find. The edges should be chosen the same as the door itself. It will be necessary for its cladding.

To make opening a door convenient, its design must have at least one leaf. In this case, the first lamella is attached to the opening, and a roller is installed on the second, allowing the doors to move smoothly along the installed guides. To fix it in one position or another, special flags are used.

Everything you need can be easily purchased. The choice of material depends only on you.

Self-production

The photo shows how to make an accordion door with your own hands.

Making a door includes the following steps:

• The first step is to mark the material and cut out two parts from it that act as flaps. They may be the same or different in width. It depends only on your imagination. If they are not made of glass, they will need to be carefully sanded. After this, wipe with a rag and stick the edges to their ends. Don't forget to press them well so that they sit tightly and leave them in that position for a day.
• After waiting until the applied glue dries well, you should put marks on them where the connecting carriages and hinges, lock, etc. will be located. Next, pins are installed on one end from the bottom and top. To do this, you need to drill holes to the required depth. Runners are installed on top. This will also require making holes.
• Having done all of the above, place both parts on flat surface and fasten the loops. They need to be installed in threes. They must be mounted at the same level. This is required to avoid displacement of the valves during further installation. Leave a gap between the wings. But it should not be more than 2-3 mm.
• A groove is made on the outer panel for installing a handle. It is installed on the last part of the door. A groove is made in the middle for attaching the lock. When the sashes are completely ready, they can be attached to the installed doorway fasteners.

Required tools and accessories

As mentioned above, in order to make a door with your own hands, you will need to have the necessary tools and materials for this.

You will need the following:

• All necessary accessories
• Guide
• Material
• Edge
• Electric drill
• If you need to enlarge the opening, use a hammer drill
• You will also need a jigsaw, preferably an electric one.
• Hacksaw

Pencil and everything needed for accurate measurements

By installing a door, you have the opportunity to increase the free space in the room.

It can be either with one leaf or with two.

A door made of tempered glass will look great.

But doing it yourself is very difficult and will require additional tools and practical skills.

If you intend to install such a door in a room, then choose a material that is resistant to moisture.

This way you guarantee not only attractiveness, but also achieve long term operation.

As we can see, making an accordion door does not require special skills or overly complex tools. It's quite simple.

The main thing is to choose the right material from which you will make them, to do everything accurately necessary measurements and correctly connect and secure the doors.

When used carefully and depending on the type used, an accordion door can serve you for many years without losing its attractive appearance and all its positive properties.

Its price will be quite reasonable, because basically, everything necessary for its manufacture is inexpensive. That is, if you decide to make an accordion yourself, you can save a lot by getting an excellent door.

The housing problem is, first of all, measured in square meters. Not everyone can boast of an impressive area of ​​their monastery. To save space, people resort to many design tricks. Among other things, experts recommend using unusual designs doors. Today we will tell you how to install an accordion door with your own hands.

These days there are a huge number of all kinds of doors. Their fundamental difference from each other is the method of opening. There are 5 types of doors in total:

1. swing;
2. pendulum;
3. stable;
4. accordion door.

For residents of cramped apartments, accordion doors are the most acceptable option. This door consists of sliding panels different widths. As a rule, the length of one section is 15-20 cm. The highlight of this door is its mechanism: the door itself does not move to the side, but moves along slats located on door frame, which come together when the door is opened.

Specifics of the “accordion” design

To know how to install an accordion door with your own hands, you need to familiarize yourself with some of the features of this mechanism.

The accordion door from the side resembles vertical blinds. The panels are attached using thin panels called lamellas. They provide connection of the panels to each other.

If the door structure is examined in more detail, you will notice that a narrow panel at the top and bottom is attached to the rail. When the door is opened, the panels snap together, resembling an accordion.

The design has a pleated sheet (or sheets), one part of which is attached to the doorway, and the other has a roller, thanks to which the sheet moves along the guides.

The door is fixed using a special stopper flag and a synchronizing device, which ensures smooth opening of the door.

Pros and cons of accordion doors

Traditionally, accordion doors are preferred for their strengths:

• wide profile - the door can be easily adjusted to fit. any doorway;
• spatial economy;
• silent mechanism;
• the door does not slam due to a random draft, thus does not damage the walls and does not deteriorate itself;
• the door opens in any direction;
• can serve as a waterproof partition in the shower.

However, despite the obvious advantages, the accordion door is not without its disadvantages, including:

• poor sound insulation;
• the door is not installed in arched openings;
• if the door is in the open position, the width of the doorway decreases;
• does not have the same strength as a standard swing;
• short-lived.

Sometimes such shortcomings cancel out the clear advantages of the accordion. So before installing similar design, you should once again think carefully about all the options and only then move on to studying the question of how to install an accordion door yourself.

Materials used

For homemade accordion doors, the following materials are used:

1. Solid solid wood. This refers to both expensive wood and less expensive wood from the coniferous family. In the second case, you definitely need to varnish and treat the door with stain so that your rooms are separated by a door for as long as possible.
2. Chipboard. Cheap, but not the best quality material. Chipboard is made from sawdust and knots, so its mechanical strength is Achilles' heel doors made of chipboard.
3. MDF. One of the best materials, from which an accordion door can be made, since MDF is comparatively lighter solid wood, which means that a door made of MDF will be easier to open. This material is also moisture resistant and has good fire-resistant qualities. And mold does not grow on the “accordion” made of fiberboard.
4. Plastic. The most practical and durable material from the list: there are practically no scratches, cracks or chips on the plastic. In addition, accordion doors respond perfectly even to high level humidity (over 70%). Plastic is not picky in care, it is different increased level sound and heat insulation. Remarkable relatively low price. However, this material does not “breathe”, and therefore it can become stuffy in a room with a plastic door.
5. Strained glass. This material more useful from an interior design point of view: such a door looks very elegant and, moreover, visually increases the space. Such doors guarantee the originality of the interior of the room, because there are many glass options: transparent, frosted, tinted, with a pattern, etc. But if you decide to work with glass, you should take into account that additional difficulties may arise, since glass is still a fragile material.

Preparatory work

To install the accordion door with your own hands successfully, you will need:

• lamellas (wood veneer plates);
• loops;
• pen;
• lock;
• rollers;
• self-tapping screws;
• articulated guides;
• guide;
• side profiles for joining;
• stubs.

You choose the width of the lamellas yourself. As a rule, 5 or 6 layers are enough. To make canvases from a solid sheet of the selected material, you need to measure the width and height doorway, taking into account future fastenings. The end needs to be sanded sandpaper, after which the edges are treated with an edge, which is quite simply attached to a clean surface with an iron, since it has an adhesive base.

Manufacturing algorithm

Whatever you end up making it from, self-installation of an accordion door is carried out according to the same principle, regardless of the material. Of course, any material has its own nuances that should be taken into account, but the installation algorithm itself does not change.

Necessary materials

First of all, you need to purchase fittings; it is best to do this at a furniture store. The kit should include axles, stoppers and a carriage with runners. In addition to accessories you will need:

• sheets of material with an area equal to the width and height of the doorway, sheet thickness - 17-20 mm;
• loops;
• self-tapping screws;
• PVC edge, the color of which must match the door.

Assembling the door leaf

A do-it-yourself accordion door cannot be installed without assembling the door leaf, which is carried out in the following order:

1. It is necessary to mark a rectangular sheet of material. From of this sheet Two panels will be cut out to form the accordion door leaf. The width of the panels can be kept constant, or one can be made much wider than the other - it all depends on desire.
2. If the door is made of wood, fiberboard or MDF, then the edges at the end of the cut panels should be wiped with sandpaper, and then the remaining dust should be removed with a regular rag.
3. Grease the end of the panel with glue. We glue the plastic edge to the end, firmly pressing the parts together. In this case, a roller will help. The edges must dry thoroughly, so they should be left for 12 hours.
4. The next step will be marking the places where you plan to install the hinges, carriage, fittings for the axle and handle with lock.
5. You need to place two metal axes on the top and bottom of the sash. Drill holes in the areas designated for the axles so that the depth of the hole does not exceed the length of the axle.
6. Next, you need to symmetrically fix the axes on the panel, that is, so that the position of both axes completely coincides in all directions.
7. Drill a hole where the roller runner should be attached (at the upper end).
8. Panels forming door leaf, you need to lay it horizontally, observing the position of the panels in which they will be connected by hinges. You need to place 3 hinges between the doors closest to each other. The hinges on one sash must be positioned strictly at the same level and at the same distance from each other, otherwise the panels will be slanted.
9. Panels that are next to each other must be connected in such a way that a distance of 3 mm is maintained between them in the open position of the sash.
10. On the panel that is located on the edge, you need to install a groove in which the door handle will then be placed. Unlike standard doors, the handle on an accordion-type door is mounted on the edge panel, and not on the end of the sash. The grooves for the lock need to be drilled between the panels in the middle. The finished sash can be hung in advance installed mounts in the doorway.

Accordion door installation process

You need to start by installing the guide rail. If the doorway is within normal limits, then the width of the rail will be 31-37 mm, height 33-40 mm. If it exceeds the width of the doorway, the rail is cut with a hacksaw.

Every 25-30 cm, holes must be made in the guide to attach to the top of the door opening.

If you plan to open the future door from left to right, then you need to install the latch on the left side, and vice versa. The end panel axle is placed in the latch, and the carriage runner is placed in the rail. We attach the guide to the top of the opening using self-tapping screws 20-30 cm long.

Now the prepared sash needs to be placed on the fastenings. To do this, fold the sash, lift it and place the metal axles in the landing plates. Then we fasten the outer sash panel and the carriage axle. Ready!

Video on the topic

Conclusion

After the given manufacturing and installation algorithm, it becomes clear how to install an accordion door yourself. It is also obvious that it is much easier and faster than with a conventional swing door. A wide selection of materials for the accordion allows you to choose best option, which will suit you in terms of price, quality and interior decor. Get acquainted with design options, consult furniture store and feel free to fence off rooms from each other, while leaving the space of the apartment untouched. Good luck!

If you want to save not only your own money, but also free space, There is perfect solution– DIY accordion door. It can serve not only as a full-fledged door, but also decorative screen and used for zoning premises.

The accordion door is a great solution for saving space

Design Features

To understand the question of how to make and install an accordion door with your own hands, you need to delve deeper into the features of this simple design. At its core, it is a folding mechanism consisting of individual small-width flaps connected by hinges or hinges.

Unlike ordinary doors, the accordion does not open wide, but folds to the side. It is driven by a special roller mechanism, which is most often located above the canvas. Special synchronizers ensure smooth and uniform movement of the shutters. To ensure that the design does not have defects, it is recommended to purchase fittings and other components from specialized construction or furniture stores.

Main structural elements accordion doors

Basically, an accordion door has only one direction of movement, however, if its side part is not secured, the door leaf can be moved both to the left and to the right. In large doorways it is more reasonable to install double models; they differ from double doors only because they do not open in a swinging manner, but fold like an accordion.

Advantages and disadvantages

Due to the many differences between an accordion door and a regular door, the advantages and disadvantages of this design should be highlighted. You definitely need to start with the advantages:

• saves space;
• allows you to zone the space;
• can be used as a shower screen;
• low cost;
• can be easily made by yourself;
• does not slam shut due to drafts;
• you can adjust its size;
• almost silent when using a high-quality sliding system;
• can be automated.

The accordion door is not only practical, but also carries a serious decorative load

However, such a door is not without its drawbacks:

• when folded, it takes up space in the opening, narrowing it;
• short-lived;
• less durable than normal;
• has low thermal insulation properties;
• does not contain noise well;
• it can be knocked out of the guides.

In some cases, the disadvantages may seem too significant. Weigh all factors: evaluate the operating conditions of the door, the expected load on it, climatic conditions, the noise level in the house and then the picture will become clearer, and you will be able to decide whether you need exactly such a product.

What materials are the doors made from?

Before you decide to make an accordion door yourself, you should decide on the type of material for its manufacture. The fabric of such a product consists of individual lamellas. The base can be made of the following materials:

• Natural wood. This material is quite durable and can last a very long time, but only if it is correct processing. Before using it in a door structure, the wood must be impregnated with an antiseptic, covered with stain and varnish. Periodically protective covering will need to be updated. With constant changes in humidity and temperature, wood can deteriorate, especially for soft species;
• MDF. This is a pressed fibreboard, which is characterized by high strength and wear resistance. This perfect option for interior doors, moreover, it is not susceptible to mold or mildew;
• Chipboard. More cheap material, which naturally affects its characteristics. At its core, these are sawdust compressed and glued together. Such a door cannot boast of a strong fastening. More quality samples are close in cost to MDF, so it is better to immediately purchase a more reliable material;
• Plastic. IN interior openings such material will not look very aesthetically pleasing. Plastic is characterized by low cost, ease of processing, water resistance and durability. This is an ideal option for a shower stall.

Basic materials for making sashes

Choose suitable material depending on the installation location and functional purpose future door.

Preparation of materials and tools

To make an accordion door you will need the following materials:

• slats,
• loops,
• hinged guides,
• pen,
• lock,
• side connecting profiles,
• plugs,
• guide,
• rollers,
• self-tapping screws

The width of the lamellas depends on the wishes of the master himself, for standard door 5-6 stripes are enough. In order to make door leaf elements from a single sheet of material, it is necessary to measure the width and height of the doorway, taking into account future fastenings. The end part is sanded with fine sandpaper, then the edges are edged; it can be easily attached to a clean surface with an iron, since it has an adhesive base.

An approximate set of accessories for making an accordion door

Manufacturing instructions

So, let's look at step-by-step instructions for making an accordion door with your own hands. The process will consist of several stages:

1. Lay out all the elements of the future door on the floor. Determine which lamellas will be the outer ones and secure them in the side profiles;
2. Mark the location of the hinges and drill holes for their fastening. Install the hinges using self-tapping screws;
3. Place hinged guides over the joints to disguise the hinges;
4. Place plugs on the lower edge of the lamellas, and additionally screw the wheels on the upper edges. It is recommended to place heavy doors on additional rollers from below;
5. If there are no errors in size and the door fits perfectly into the opening, all that remains is to install the lock and handle.

Phased visual instructions for installing an accordion door

The recommended width of the gap between the joined sashes is 3 mm, this helps eliminate restrictions on the movement of the leaf. If wide elements are used, the number of loops must be increased, since the weight of the parts is greater than when using narrow slats.

Door installation

Once the canvas is ready, you can begin its installation. First you need to install a guide; it is attached to the upper horizontal bar of the loot. If desired, you can install special stoppers on the lower guides.

Accordion door installation diagram

The next step is to install the canvas. Place the wheels into the guide and secure the door in vertical position. To prevent the accordion door from moving from side to side, one edge of it is fixed to the bar using a joining profile.

Self-installation of an accordion door can be done independently without any problems

As you can see, installing an accordion door in a doorway is much easier than a regular one, and the process of making the door itself will not take much time. The variety of materials allows you to create unique products. To make the structure lighter, lamellas with glass inserts can be used instead of blind sashes. For screens, parts with decorative through carvings or lattice are suitable. To save even more space, the door can be inserted into the wall, completely or partially; this is available for plasterboard structures that are hollow inside. Which model to create is up to you to decide.

There are more than enough different methods for designing openings. The choice depends not least on the specifics of the room, its size and installation location. In non-standard openings, built-in cabinets, and sometimes in partitions, it is advisable to use folding analogues instead of traditional hinged panels. And no matter what the skeptics claim, the accordion door can be installed quickly enough with your own hands, and the installation process itself is not particularly difficult if you understand the technology in detail.

Where to begin

Clear the opening

• Put the door in old box inappropriate for a number of reasons. Firstly, it is not a fact that they will not contrast with each other; secondly, during the reconstruction it becomes possible to partially redevelop the premises. And widening the opening is one of good options. That is why both specialists and those who have already dealt with self-installation accordion, it is advised to completely dismantle the jamb.
• After processing the ends of the wall, take measurements. Knowledge linear parameters will allow you to select optimal model folding fabric. There is no point in making it yourself. The range of products is so diverse (in terms of the material of the slats, their shade, design) that when asked how best to make an accordion yourself, there is only one answer - it’s easier to purchase and install a ready-made one. This is what it all comes down to.

The only nuance is that accordion doors are supplied in various sizes, which depend on the number of slats, their width and manufacturer. All necessary data is reflected in the installation manual supplied with the product. Consequently, you will have to “adjust” the opening to the model you like, and not vice versa.

Purchase the necessary materials

Folding doors are supplied fully equipped, and its compliance is checked in the furniture showroom. But only after the “rough” preparation of the work area will it become clear what else will be needed (certain tools, polyurethane foam, additions, platbands and so on).

After this, the necessary technological operations. The method of narrowing (expanding) a passage in a wall is determined by its material, condition and the capabilities of the craftsman: frame followed by concreting, reinforcement with rods, plastering, and so on. As a result, the opening should be completely ready for installation.

Operating procedure

This step-by-step instruction reflects only general algorithm actions and installation features. However, delving into the question of how to install an accordion door with your own hands, you should study the manual from the manufacturer. Some models have their own, albeit minor, nuances. For example, the number of loops recommended for each lamella (depending on the width and weight).

Arrangement of the box

Everything that was previously done in terms of preparing the opening was essentially rough work. It needs to be refined; It is for these purposes that slopes and platbands are purchased. The specifics of their fastening is a separate issue. The master decides for himself how to fix the decorative strips to the base (using glue, self-tapping screws), focusing on its material. But only one result is needed - the right one rectangular shape opening.

Particular attention to the top; it must correspond exactly to the horizontal. Otherwise, after completing assembly of the accordion door, its leaf will be skewed. Consequently - big problems with opening/closing, not to mention appearance. This means that some of the work will have to be redone.

Installing the guide

• It comes included. The length is standard, and therefore it will first have to be cut to the width of the opening.
• The peculiarity of fastening the rails is that it is necessary to correctly select the interval between the hardware. There are prepared holes in the guide, but if required for more reliable fixation, it is worth drilling additional ones. For example, if the wall is made of cellular blocks that are not particularly dense. In this case, the more fasteners, the better.

• When cutting the rail, some of the holes will remain on the removed piece. Consequently, fixation may be insufficient at this edge. It should be taken into account that for reliable fastening of the guide, the last screws in the row should be located no further than 2.5 cm from the edges of the strip.
• Some folding door models have 2 rails. The load on the top rail will be maximum, and therefore the recommended interval between fasteners is 150 mm. For the bottom guide, 250 is enough.

Fabric preparation

• All slats need to be laid out on the floor.
• The outermost one is determined, and it is subsequently rigidly attached to the opening. For doors that slide in both directions, it is assumed that two slats are fixed on the sides of the opening.
• All planks are equipped with hinges and wheels according to the attached diagram. If the accordion budget option, then you will have to drill holes.

Door installation

Enough simple operation: the lamellas are folded, after which the wheels of each, in turn, are inserted into the guide profile. All that remains is to place plugs along its edges and fix the outer panel. Otherwise, the canvas will begin to “move” spontaneously. For this purpose, the kit includes connecting profile(or two).

Fastening accessories

Usually, we're talking about only about the pen. Although some accordions provide for the installation of a lock.

After completing the door assembly, the wheels should be lubricated (with technical Vaseline, for example). This will extend their life and ensure silent sliding.

They will help those who are thinking about how to make an accordion door with their own hands:

• To make planks, you can use thin boards, multilayer plywood, chipboard, fiberboard, and PVC siding. It is necessary to take into account the location of the intended installation. Plastic is more suitable for installing an accordion in the openings of built-in wardrobes or for curtains, for example, in showers. But you shouldn’t use it for an interior door - it’s difficult to fit into the interior. If the lamellas are attached only at the top, this is definitely not an option - the slightest draft will lead to spontaneous movement of the folding sash.
• Its weight can be artificially reduced in order to simultaneously facilitate installation and decorate the canvas according to the principle of paneled doors. That is, provide inserts made of thin glass, plastic, film or original grilles. Focusing on a specific opening, choosing the best option is easy.

• To avoid skewing of the canvas panels and possible snags, it is recommended to leave a gap of about 2.5 mm between them.
• The accordion design is designed so that it is slightly wider than the opening for which it is intended.

If the installation principle is clear, then installing the door, regardless of its modification, will not cause any difficulties. The main thing is to properly prepare the opening, taking into account all the features of the wall material. And what kind of accordion to choose (make) is up to the owner to decide.

Doors between rooms perform many functions: they zone space, allow you to relax in one room, receive guests in another, and study in a third. The presence of doors is very important point, since their absence can disrupt spatial harmony. A do-it-yourself accordion door will save you money on your purchase. finished design, and also carry out exactly the design that matches the owners’ ideas about the ideal interior door.

Every year new types of structures appear on sale, which surprise with their practicality and aesthetics. Interior door first of all, it must perform a delimiting function, only then can it be called complete and functional. In stores today you can pay attention to accordion doors - they are very convenient to use, save space and at the same time successfully delimit it.

The cost of accordion doors in stores can be called quite high, so good and economical option making doors with your own hands is considered.

Folding doors can be made and installed yourself, but provided that all tools and materials are prepared in advance. Before manufacturing, you should decide on the material for the door, as well as the fittings. Gather door leaf It’s not very difficult when you have step-by-step instructions from a professional in front of your eyes.

Step-by-step instructions for assembling the canvas:

• Make markings on the prepared material. Two panels are cut out of it. Depending on individual preferences, one panel can be made larger than the other, or they can be given the same dimensions.
• The ends of the panels, after they are cut, should be carefully processed. A plastic edge is glued to the edge of the panel and coated with glue. To ensure that the materials stick together well, use a special roller. The structures are allowed to dry for half a day.
• Mark the places where the fittings and other elements of the door structure will be located.
• Two axes made of metal are installed on the panel. The axles are fixed at the bottom and top.
• Prepare holes for inserting the roller runner.
• Connect the panels using hinges. In this case, the door handle is mounted on the panel that is placed last.

Making a door will not take much time if you prepare in advance for the assembly process. Everything must be at hand. The master must carefully study the instructions. In case any question arises. You should seek help from a professional - otherwise the door can be damaged during the manufacturing process.

Advantages of a screen door

Modern door designs differ in their functionality and practicality. The screen door mechanism consists of structures that fold and are connected by hinges and hinges. Such doors do not fold wide open, which significantly saves space in the room.

The door leaves move smoothly and quietly, which ensures convenient use of the doors.

A very important point - right choice fittings - they must be of high quality, otherwise problems with opening and closing doors cannot be avoided. This type design has its advantages and disadvantages. Before purchasing or constructing such doors, it is important to decide for yourself which doors and materials to choose for them, and calculate the pros and cons.

Design advantages:

• Space saving;
• Convenient zoning of rooms;
• Relatively cheap cost;
• Static;
• Silence.

This design can be easily manufactured and installed independently - which will save money on its purchase. Among the disadvantages, it can be noted that the design is not very durable when compared with conventional doors. If not handled carefully, it can quickly become unusable. Such doors are usually made of not very dense material, which means that it does not protect against the penetration of extraneous sounds.

DIY folding doors for a closet

The closet in the apartment performs an important function. Sometimes its design cannot be called convenient. For example, when the closet is in a room with a small area, and its doors open wide. Today, folding closet doors are becoming fashionable – they captivate consumers with their practicality and ease of use.

If you want to install sliding doors in your closet, but don’t want to buy new ones, you can come to a solution self-made doors.

To make doors you will need minimum set materials and tools. To do this, you can get hinges, blocks of wood, hardboard, chipboard, varnish. To calculate the dimensions of future doors correctly, it is important to first measure the cabinet itself.

Making Tips:

• Pay attention to the width of the sashes - it should not exceed 400 mm.
• The doors can be connected to each other using piano hinges.
• The sashes need to be made on a slatted frame - then they will be light.
• The frame can be covered with hardboard.
• The doors themselves can be covered decorative wallpaper or paint and then varnish.

You can make the doors yourself, but it is important to note that one inaccurate movement can lead to the design not working. To be sure of the correctness of your actions, you need to study information about folding doors, read the advice of professionals who manufacture them long years. It is important to be confident in the success of the final result.

Accordion door repair: what to look for

If not handled very carefully, the accordion door may break. Sometimes you can repair a door yourself, but to do this you need to know the mechanism by which the door functions. The mechanism is the basis without which the functioning of any type of door is impossible.

The accordion door mechanism includes an upper guide and fasteners that support the leaves.

The upper part of the opening consists of a specific aluminum or steel rail. WITH outside the doorway is decorated with wood, veneer, laminate or simply varnish. Not so long ago, the sliding part of the doors was made of a ball and a metal rod, which quickly became unusable during use. Modern manufacturers install bearings.

What does an accordion door consist of:

• May consist of two or more leaves.
• The sashes are usually connected by strips made of fabric or leather strips.
• Each leaf is attached to the rail independently.
• The doors may have different designs: panel, panel, glass, plastic or aluminum.
• The sashes are usually the same size.

If the door is broken and has minor damage, you can repair it yourself. If one leaf is broken, it can be replaced. The structure cannot be repaired only if the door has suffered significant damage.

How to make an accordion door with your own hands (video)

Sliding doors today they are becoming more and more popular. It cannot be said that they have become publicly available, since in stores their cost can vary and be unaffordable for many. A homemade accordion door is not much different from a purchased one. Therefore, it is quite possible to do it yourself, following the advice and instructions of professionals.