How to make scuba gear from bottles. Do-it-yourself scuba gear from available materials. Human dependence on technology

Fans of diving, snorkeling and hunting will definitely love the idea of ​​making their own scuba gear, which is what this video review is about.

So, we will need:
- pump sprayer;
- flexible plastic hose;
- underwater snorkel;
- capacity.

According to the author, such sprayers are used in gardening, so it will be easier to find them in specialized stores for gardeners. We also note that when choosing a container, you should not settle on large bottles, since they will stretch upward strongly.
First you need to remove the limiter that is installed in the sprayer. On the model that the author uses, the limiter is located along the edge, so it is enough to cut it off with a hacksaw. This is necessary so that more air comes out of the sprayer.

We attach a cap from a plastic bottle to the lower part of the underwater tube, on which we pre-drill a hole along the diameter of the hose.

We insert the hose into the hole and also carefully seal it with glue, taking care of the tightness of the structure.

Simple scuba gear is ready.

It works according to the following principle. We connect the bottle with a pump sprayer and fill it with air. A 330 ml bottle is filled with air in about 50 strokes. This amount of air is enough for 4 full breaths. When using a larger container, you should take care of the load, since a bottle filled with air will make it difficult to stay under water. In order to extract air from the bottle, just press the corresponding button on the sprayer.

Diving is a very exciting activity, but it involves many risks to life and therefore is replete with a large number of safety rules. Also, before each dive, diving cylinders must be checked and refilled.

This is a very responsible procedure, and the first thing you should remember is that refilling with industrial gases is strictly prohibited. they are filled with a pure air mixture of oxygen and nitrogen, less often with mixtures of air and inert gases. The concentration of components and the absence of impurities is vital at depth, since even the smallest foreign particle can be fatal.

Refueling usually takes place in specially designated places, where a number of important details must be taken into account:

1. Extreme care must be taken when transferring breathing gas.
2. Work is carried out only with special marked cylinders containing oxygen.
3. Refilled cylinders are required to be marked, indicating the composition of the mixture.
4. The oxygen concentration is carefully monitored - if it exceeds the norm, it can lead to corrosion.
5. Complete elimination of impurities of carbon monoxide or carbon dioxide, which are deadly when diving.

Also, do not forget that high compression of a gas such as oxygen can lead to an explosion. The reasons are known, and based on them, all precautions are being taken at filling centers. The question may arise - how many are there? The list below will give the answer:

1. The main reason is carelessness when pumping oxygen.
2. Poor quality of the inner walls of the cylinder, especially if they are corroded.
3. Damaged thread or neck where the valve is connected.
4. A sharp temperature change that causes a gas to change volume.

Design and materials of which the cylinder consists

Cylinder volume

In order to understand which cylinder is suitable for an individual diver, you need to take into account his physiological data. First of all, it is worth remembering that the larger the cylinder, the heavier it is, but it also holds more breathing gas. they know how much air they consume and accurately calculate the volume of the purchased tank - after all, the average dive lasts from 45 to 60 minutes and a balance of 50 bar of air before ascent is considered ideal.

An ordinary person of average body weight gets by with a 12-liter cylinder, in which the breathing gas is pumped to the standard value of 200 bar. But these are very average values, since there are divers who have very economical breathing, allowing them to take 10-liter oxygen cylinders with them, and there are heavyweights who need all 15 liters of reserve. Occasionally, there are divers who use cylinders with a volume of 18 liters or more, but these are exceptionally strong and healthy swimmers, since such containers have a significant weight. So in order to decide how much you need, only a specialist can answer.

Cylinder design

It would also be useful to know what elements make up the equipment that ensures your life under water:

• The most important and noticeable component of the cylinder is the bulb. It is a gas storage facility. At the moment, there are 3 types of cylinders based on the materials used in their production. Each of them has its own advantages and disadvantages:

1. The first type is steel cylinders. They are heavy, quite durable and have negative buoyancy, which plays into their hands when taking on loads. But their considerable weight imposes a limit on how many of them you can take with you to depths.
2. Aluminum cylinders, oddly enough, are heavier than steel ones. This is due to the thicker walls of the flask, despite the low density. Despite this, they have one important property - their weight in water is approximately zero. That is why they are used by many divers of various diving federations, even though the maximum pressure in them does not exceed 210 bar.
3. The third type is composite cylinders made of steel and carbon fiber. They are not heavy, have a high level of buoyancy and are quite fragile. Their prices are very high, so they are rarely used.

• Shut-off valve. It is designed to connect the flask and the regulator. Its task is to control the gas flow both to and from the cylinder. It also creates a hermetically sealed connection and contains a special fuse - a disk that will collapse the moment the pressure exceeds the permissible limit.

Valves with 1 input and 1 gate are commonly found. But there is a more complex design - a Y-shaped valve, which has 2 outlets and 2 valves. If one output fails, it can be closed and the second one used.

• Seal. It is a rubber ring to prevent the ignition of mixtures enriched with oxygen.
• Pressure gauge or reserve lever (on older models). Until the 70s of the last century, reserve levers were used to warn the scuba diver about the end of the breathing mixture. At the moment of exhaustion, the gas supply stopped and to resume it, you had to pull this same lever and float up. This system still occurs periodically today.
• A shoe designed to protect the cylinder from unnecessary impacts on the ground and to install it in a vertical position. It looks like a plastic glass and is used mainly with steel cylinders.

Refilling a cylinder at home

Until the 1990s, a conventional air mixture consisting of 79 percent nitrogen and 21 percent oxygen was used to fill cylinders. Alas, it was very dangerous, since its use was fraught with nitrogen narcosis, which could lead to death. Then they tried to use both oxygen-enriched and oxygen-depleted mixtures. But the practice did not take root due to the fact that it did not reduce, but increased the danger to life.

Today they continue to fill with regular air and breathing mixtures with the addition of helium, which work many times better, but are also much more expensive.

As already mentioned, it is better to refill cylinders in special places, using the services of professionals. But if you are experienced enough, know your equipment well and can afford to buy everything you need, then you can do this at home. To do this you will need: scuba gear, a gas analyzer, a gasoline or electric compressor.

Step-by-step instructions for refueling:

• Without the skills to handle compressor equipment, it is better not to undertake refueling yourself. Otherwise, prepare a substantial sum for the compressor. Of course, the ideal option would be to collaborate with like-minded people with whom you make regular dives - then the cost of refueling equipment will be economically justified.

The choice of gasoline or depends on the places where you dive. If there is such a luxury as an electrical connection, take an electric one. But a more universal option will still be gasoline. And experts in any specialized store will always help you with your choice.

• Before starting, check all valves and membranes, no matter how many there are. They should not have diaper rash or damage - everything should be in perfect condition. Also inspect the valve springs, fasteners, clamps, and air hoses. If you find the slightest defect, replace it with a new one without delay.
• When starting to refuel, attach the scuba tank to the compressor and set it to the pressure for which the cylinder is designed. Next, turn on the compressor and open the valve. Standard 12–14 liter cylinders take about ten minutes to fill. Then turn off the air and turn off the compressor.
• The most important part is checking the air composition using a gas analyzer. At the slightest deviation from the norm, empty all the contents and repeat the procedure. Your life depends on it.

Further, the cylinder is stored as long as needed. Don’t worry, they need to be stored in a filled state, as this significantly reduces the risk of various impurities getting inside and to avoid the start of oxidative reactions on the internal walls.

Conclusion

If you decide not to seek the help of specialists and fill your diving cylinders yourself, be careful. This activity does not tolerate negligence and inattention. But by following all safety rules, you will save yourself from tedious trips to the nearest specialized store or fire station and will be able to do everything yourself.

Homemade scuba gear is an inexpensive device for breathing underwater. The authors of numerous reviews claim that this device can replace expensive diving equipment when diving to a depth of up to four meters. So, homemade scuba gear - what is it and how to make it?

Human dependence on technology

Those wondering how to make a homemade scuba gear should remember that any human activity that is not associated with the use of any instruments, equipment or other equipment makes you rely only on your own luck or the help of a friend. These, for example, include regular swimming. The use of technology by a person - a car or scuba gear - multiplies his capabilities many times over. But in proportion to the complexity of technology, human dependence on it also increases.

A diver equipped with a “mask, fins, snorkel” set finds himself in an unpleasant situation when he loses some of his existing equipment underwater. But a scuba diver finds himself in a much more difficult position if the air supply suddenly stops underwater. This can happen at a depth from which it is impossible to ascend in one breath. Bulky scuba gear reduces mobility and increases water resistance. An emergency like this can happen under ice or in a cave. Submariners must pay great attention to the technology they use. This is especially true for those who decide to make homemade scuba gear.

About the complexity of the issue

Modern scuba diver equipment is focused on his comfort and safety. All components and equipment elements must be thought out to the smallest detail. Experts have developed rules for the use of equipment, violation of which is strongly recommended. If a beginner encounters the slightest difficulty in operating the equipment, he should seek advice from his trainer, since trouble-free use of the equipment is the key to safe

Scuba diving is a fairly complex device. Experts assure that creating a homemade scuba gear at home is quite difficult. To do this, you must have the appropriate knowledge and be able to work on good turning equipment. Those who are interested in the question of how to make a homemade one should learn as much as possible about this device.

Story

The word "scuba" translated means "water lungs". History shows that the device was created gradually. He was the first to patent a regulator for supplying air from the surface and adapted it for use in scuba gear. Invented in 1878, it used pure oxygen. In 1943, the first scuba gear was created. Its authors were the French Emile Gagnan and Jacques-Yves Cousteau.

Device

Those who decide to create a homemade scuba gear should know that this device consists of 3 main parts and several additional devices:

• Balloon. Usually one or two containers with a compressed breathing mixture are used. Each container holds 7 - 18 liters.
• Regulator. Consists of a gearbox and a lung demand valve. A scuba tank may contain one or more gearboxes.
• Buoyancy compressor. An inflatable vest, the special purpose of which is to regulate the depth of immersion.
• Pressure gauge, equipped with a signal that is triggered when the air pressure reaches 30 atmospheres.

Peculiarities

Those who want to create a homemade scuba gear need to know about the features of its components.

• The high-pressure cylinder included in the scuba tank is a reservoir for storing air. The working pressure in it is 150 atmospheres. A standard cylinder with a capacity of 7 liters at this pressure holds 1050 liters of air.
• Single, double or triple scuba tanks are used. Typically the capacity of the cylinders is 5 and 7 liters, but if necessary, 10- and 14-liter cylinders are used.
• The shape of the cylinders is cylindrical, with an elongated neck equipped with an internal thread for attaching a high-pressure tube or branch pipe.
• Cylinders are made of steel or aluminum. Steel cylinders are coated with a protective anti-corrosion layer, which is used as zinc. Steel cylinders are stronger than aluminum cylinders, but they are less buoyant.
• The cylinders are filled with a gas mixture or compressed filtered air. Modern containers are equipped with overfill protection.
• They are connected to an air reducer, which reduces the pressure from 150 to 6 atmospheres throughout the operation of the scuba tank. With such pressure indicators, the respiratory mixture enters the pulmonary valve.
• The lung demand valve is the main device in the scuba device, since it supplies breathing air, the pressure of which is equal to the water pressure on the diver's chest area.

Types of scuba

Those who decide to construct a homemade scuba gear should know that diving uses three types of equipment: open, closed, and semi-closed circuits. They are distinguished from each other by the method of breathing used.

Open circuit

It is used in inexpensive, lightweight and small-sized equipment. Works exclusively on air supply. When exhaled, the recycled composition is released into the environment without mixing with the mixture filling the cylinders. Thanks to this, oxygen starvation or carbon dioxide poisoning is eliminated. The system is simple in design and safe to use. But it has a significant drawback: it is not suitable for use at great depths due to the high consumption of the breathing mixture.

Closed circuit

Scuba gear works on the following principle: the diver exhales air, which is processed - cleared of carbon dioxide, saturated with oxygen, after which it is again suitable for breathing. System advantages:

• small weight;
• small dimensions of equipment;
• Deep water diving possible;
• a long stay of the scuba diver under water is provided;
• it is possible for the diver to remain undetected.

This type of equipment is designed for a high level of training; it is not recommended for beginners. The disadvantages of the system include its significant cost.

Semi-closed scheme

The operating principle of such a system is a hybrid of open and closed circuits. Part of the processed mixture is enriched with oxygen, after which it is again available for breathing, and its excess is released into the environment. At the same time, different immersion depths require the use of different gas breathing cocktails for breathing.

Backup source

Many divers use mini-scuba tanks as a backup tank. The mini-model is a compact system designed for breathing underwater at shallow depths. It includes a gearbox with a mouthpiece and a small capacity air tank. Air volume indicators depend on the individual characteristics of the scuba diver.

Use of scuba gear

Scuba gear helps a person to swim freely underwater. Eliminates the need to constantly walk on the bottom or remain in an upright position. This determines the widest use of equipment not only by divers, but also by cameramen, repairmen, archaeologists, ichthyologists, hydraulic engineers and photographers, etc.

Many people try to make homemade scuba gear with their own hands. The motivation for making such a decision can be either a desire to save money or an irresistible love for technical creativity. Network users willingly share tips and recommendations regarding the production of the device at home.

"Sparka": homemade scuba gear from a gas cylinder

You will need:

• metal-composite, steel aviation with oxygen line shut-off valves (against backlash) and non-return charging valves. Volume of each: 4 l, weight: 4.200, operating pressure: 150 bar.
• Aviation oxygen valve
• The flywheel is homemade.
• Gearbox from an aircraft ejection seat.
• Soviet gas reducer for propane.
• Homemade spring made of steel, etc.

How to make?

1. The cylinders are connected using stainless steel clamps (can be made from washing machine tanks). Wooden inserts covered with epoxy-based fabric and black PF paint are inserted between the cylinders. Holes are drilled in the gearbox cover to prevent water from stagnating.
2. The automatic activation of the oxygen system is removed. A lever with a pin is installed.
3. A homemade regulator for scuba diving can be made from a spring made of stainless steel wire connected to the safety valve of the gearbox and an aluminum cover with an outlet fitting for connecting a pulmonary valve. The reducer is adjusted (pressure set to 6.5 bar).
4. A pulmonary valve can be made from a Soviet gas reducer. Into its body you need to insert 2 fittings made of a duralumin tube (diameter - 16.5 mm). Place a mouthpiece with a stainless plate clamp on one of them. In another, glue a textolite glass with a gas mask valve. If one mushroom valve quickly fails, it should be made from a reinforced rubber circle (can be cut from the boot covers of a Soviet chemical kit) and a bolt with a nut that secures the valve directly to the seat. Instead of the old connecting fitting, a new one is made from duralumin, which is glued with epoxy in place of the old one. Valve seat diameter - 2.5 mm.
5. To counteract the opening force of compressed air, a homemade tension spring is installed in the lid, which is hooked to a horizontal pin at the top of the lid.
6. The membrane is made from the same rubber from shoe covers. A lightly weighted washer is installed on it to eliminate vibration when inhaling. The inhalation valve cushion can be ground by hand from a piece of rubber using high-speed sandpaper.
7. The lung demand valve is tightened with three bolts. Tightened even by hand, they are able to hold the membrane well. For additional comfort in using the equipment, the lower part of the lung demand demand valve is equipped with a stainless steel plate with rivets, which is installed under the chin.
8. Shoulder nylon straps are made from pieces of halyard without adjustment due to the lack of need. The waist belt may not have a quick release buckle.

Description of the result

At a depth of 10 m, scuba gear allows you to perform heavy physical work (dragging rocks along the bottom or swimming fast) without the effect of lack of air. It is not equipped with a blow-out button, but you can do without it. The lung demand valve only needs adjustment the first time it is used, after which minimal adjustment is made by moving the inspiratory valves. Operates at a pressure of 6-7 bar. Inhalation efforts are characterized as quite acceptable, similar to AVM-5. Weight - 300 g. Connects to the hose without gaskets using a cone connection. The device is very light (about 11.5 kg), compact and streamlined. It does not have a minimum pressure indicator.

Another option for homemade scuba gear from gas cylinders

1. Prepare a balloon. A container with a volume of up to 22 liters is used, depending on preference. You can use 2 cylinders of 4.7-7 liters each. For normal diving, a 200 bar cylinder is suitable, for technical diving - 300 bar.
2. Prepare the reducer with a pressure similar to the pressure of the cylinder.
3. Connect the reducer to the cylinder. Make sure that the pressure in it is 6-11 bar higher than the ambient pressure.
4. Connect a hose to the reducer, attach a lung demand valve to the hose. If it works properly and the master does not make mistakes, the pressure corresponds to the ambient pressure.
5. Attach regulators. Their number depends on the tasks assigned. For planned amateur diving, 2 regulators are needed: the main one and the backup one.
6. Install a buoyancy compensator (not necessary for proper functioning of the scuba tank, but makes diving easier and safer).
7. Inflate the oxygen cylinder and check the assembled system. If all its elements are connected without errors and the device is working, you should carry out the first test dive to a shallow depth. If it was successful, the scuba gear can be considered ready for use.

Homemade scuba gear from a fire extinguisher

1. A carbon dioxide fire extinguisher cylinder is used (pressure - 150 bar, capacity - 5 l, weight - about 7.5 kg)
2. The valve must be ground to a round shape, screwed into a T-shaped fitting (from the cylinder from the ejection seat), which must be equipped with a charging valve.
3. Two duralumin plates are installed on it, tightened together.
4. The gearbox is mounted on them, which is a converted second stage of the oxygen reducer from the ejection seat (operates from 8 bar).
5. A homemade safety valve is made, the diameter of the membrane is reduced using 2 plates.
6. A gearbox valve seat with a diameter of 1.2 mm and a valve cushion (from fluoroplastic) are made; in addition, it is necessary to make some other minor alterations.
7. The lung demand valve is similar to the model described above (see the section “Sparka”: homemade scuba gear from a gas cylinder). A housing from another gearbox is used, as well as homemade exhalation and inhalation valves. The cylinder is secured using duralumin clamps on the fiberglass back.

Result

The device is reliable and trouble-free in operation. The main problem in maintenance is corrosion of the aluminum gearbox housing in salt water. To solve the problem, it is recommended to use silicone grease. The equipment is not equipped with a pressure gauge, there are no filters (you can use a siphon tube in a cylinder with small holes at the end). Weight - 9.5 kg.

There are other options for homemade scuba models using a fire extinguisher on the Internet.

Option #1

• The device is made from a receiver cylinder (2 l) from a fire extinguisher.
• Fastens to the chest area.
• Instead of a regulator, a homemade pneumatic button is used to manually supply air for inhalation.
• The device is equipped with a check valve, which cuts off the air line in the event of a rupture of the air supply hose.
• There is no gearbox, so it is used at limited immersion depths.
• The diaphragm is pressed against the valve seat by a spring. When you press the lever, it rises and air is inhaled. Exhalation is done into the water using an exhalation valve.
• Air supply from the surface is carried out from a transport welding cylinder with a volume of up to 40 liters. A pulmonary valve is connected to the device.
• A pneumatic button attached to the hand is more convenient than a button that you have to hold in your hand. The hand is partially released and used to do some work.

Option No. 2

• A fire extinguisher cylinder (1.5 l) is used.
• The device uses a manual inhalation supply system.
• The equipment is equipped with a valve - a pneumatic button, a valve and a reducer.
• It consists of a tube screwed into a fitting from a fire extinguisher, in which there is a plastic check valve pressed to a cone seat by compressed air and a spring. A housing with a membrane and a pin is screwed onto the tube, pressing on the plastic valve. On the reverse side there is a lever designed to be pressed with a finger.
• The air coming out of this device passes through a nozzle (diameter - 2 mm), then is inhaled into the mouthpiece. Exhalation is carried out using a valve.
• The weight belt is quite simple to manufacture. It is made from lead cylinders cast from a duralumin tube with a longitudinal section. Equipped with a homemade quick-release buckle.

There is no doubt about the reliable functioning of the equipment, but the tightness of the plastic valve that closes the cylinder is problematic

How to make scuba gear from a bottle?

The Internet offers instructions on how to make a homemade scuba tank from a bottle. According to the author who provided it, you can use a sprayer used in gardening for this. The easiest way to find it is in a specialized gardening store. When choosing a container, you should not give preference to bottles that are too large: they will “pull” upward strongly.

You will need:

• sprayer (pump);
• flexible hose (plastic);
• an underwater snorkel used for diving;
• container (bottle).

Technology:

1. First, remove the limiter installed in the sprayer. This is necessary to ensure that as much air as possible comes out of the sprayer.
2. A hose is pulled onto the top of the sprayer and carefully sealed with silicone or hot glue.
3. A cap from a plastic bottle is installed on the bottom of the underwater tube, with a pre-drilled hole along the diameter of the hose.
4. A hose is inserted into the hole, carefully sealed and sealed. Simple scuba gear is ready.

Operating principle

The bottle is connected to a pump sprayer and filled with air. The 330 ml container is filled with air using 50 strokes. This amount of air is sufficient for 4 full breaths. A larger container should be equipped with a weight, since a bottle filled with air will float upward. To extract air from the bottle, just press the corresponding button on the sprayer.

Conclusion

Making your own scuba gear will save money and provide the opportunity to experience the incomparable pleasure of participating in the creative process. In order to ensure the safety of their own lives and health, craftsmen must strictly follow the instructions.

Must ensure the safety and comfort of the diver. It’s quite possible to make scuba gear with your own hands. However, for this you need to know the operating principle of the equipment, its design and working life. Let's consider this topic in more detail.

Device

If you decide to make a scuba gear with your own hands, you should know what it consists of. For the device to operate correctly, it must have several basic elements:

1. One or a pair of cylinders with compressed breathing composition, holding 7-18 liters.
2. A regulator consisting of a pulmonary demand valve and one or more gearboxes.
3. A buoyancy compressor, which is a special inflatable vest that makes it possible to regulate the depth of immersion.
4. Pressure gauge. It has a signal that is triggered at an air pressure of 30 atmospheres.

DIY scuba from a fire extinguisher

To manufacture such a device, you will need a tank of acid fire extinguisher, designed for a pressure of 150 bar, with a capacity of 5 liters. The following manipulations are carried out in several stages:

• The valve is ground to a round shape and screwed into a special T-shaped fitting equipped with a charging valve.
• A pair of duralumin plates, pulled together, are attached to it.
• A recycled second stage of a similar element of an oxygen chair is used as a gearbox (operates from 8 bar).
• A homemade safety valve is being prepared; the diameter of the membrane should be reduced using two plates.
• A gear valve bed (with a cross-section of 1.2 mm) and a fluoroplastic cushion for the same element are made.
• The lung demand valve is tightened with bolts.

The cylinder is fixed with duralumin clamps on the fiberglass back. We can assume that the mini-scuba gear, made with your own hands, is ready.

The unit in question is reliable in operation. Among the main disadvantages is corrosion of the gearbox housing made of duralumin in salt water. Silicone grease will help solve this problem. The average weight of the assembled equipment will be about 9.5 kg.

Second option

In this case, the device is made from a two-liter receiver cylinder from a fire extinguisher. The device is fastened in the chest area; instead of a regulator, a homemade pneumatic button is used to mechanically supply air for inhalation. The reservoir has a check valve that closes the air compartment if the hose breaks.

Since there is no gearbox, scuba gear is used at a limited depth. The diaphragm is pressed against the valve seat under the influence of a spring. When you press the lever, it rises and the air mixture is supplied for inhalation. The exhalation goes into the water through a special valve. Air is supplied from the surface by means of a welding cylinder (volume up to 40 liters), to which a lung demand valve is connected. The pneumatic button can be attached to your hand, which will make diving more convenient.

Another model from a fire extinguisher

This DIY scuba gear can be made from a 1.5 liter fire extinguisher cylinder. The unit is equipped with a manual air supply system for inhalation, there is a pneumatic button, a reducer and a valve. A fire extinguisher cylinder (1.5 l) is used.

The reducer includes a tube placed in the fitting from the fire extinguisher. It houses a plastic check valve, pressed to its seat by compressed air and a spring. A housing with a membrane and a pin is screwed onto the tube. The reverse side is equipped with a lever that is activated after pressing with a finger. The air, passing through a nozzle with a diameter of 2 millimeters, is inhaled, and exhaled through the valve. The weight belt can be made from lead or duralumin tubes. It is equipped with a homemade buckle with a quick lock.

DIY scuba from a bottle

To make this device you will need a pump sprayer, a flexible plastic hose, a diving tube, and a bottle.

The production of the device is carried out as follows:

1. The first step is to remove the limiter found in the sprayer. This will increase the output of the air mixture.
2. A hose is placed on the top of the sprayer, and the connection point is sealed with silicone or hot glue.
3. A cap from a plastic bottle is mounted at the bottom of the underwater tube, in which a hole must be made in advance along the diameter of the hose.
4. The hose is inserted into the prepared socket and carefully sealed.

The bottle interacts with a pump sprayer and is filled with an air mixture. For example, a 330 ml tank fills in about 50 pumps. This is enough for 4 full breaths. Larger containers require reinforcement with a load, as they tend to float when filled with air. To remove the mixture from the bottle, just press the spray button.

Device for scuba diving from gas cylinders

You can actually make a scuba tank with your own hands from gas cylinders. Below are the stages of work:

1. Cylinders up to 22 liters are used as the main container. Alternatively, you can take two tanks of 5-7 liters each.
2. Next, you need to prepare a reducer comparable to the pressure of the container.
3. The reducer is connected to the cylinder; the pressure in it should be 6-10 bar higher than the ambient pressure.
4. A hose with a lung demand valve is connected to the reducer.
5. Then the regulators are connected. Their number depends on the intended tasks. For example, for planned diving you will need a main and a spare element.
6. You can also install a buoyancy compensator, which will increase the safety of the scuba gear.

At the last stage, you should fill the cylinder with the air mixture and check the operation of the entire device. It is advisable to carry out the first dive to a shallow depth to ensure that the unit is in good working order.

In conclusion

Above we discussed how to make a scuba gear with your own hands from scrap materials. In principle, there are no particular difficulties in this. Depending on the tasks, you can make an almost professional model designed for great depths, or a simple bottle scuba gear for shallow dives. When you decide to make a device yourself, remember that safety comes first. Therefore, after assembling the structure, be sure to check it for leaks and proper operation of all components.