How to make your own dressing room at home. How to make a dressing room with your own hands: detailed instructions. Materials and filling of the dressing room

Reading time: 15 minutes. Views 1.6k.

The need for rational placement of things in small spaces does not lose relevance from year to year. Furniture designers are working tirelessly to create new ergonomic storage systems. As a result of their efforts, bulky closets are replaced by a comfortable, meticulously thought-out and spacious dressing room - you can equip it with your own hands in the pantry, under the stairs, in the hallway or bedroom. Having decided on the layout, completing basic drawings and calculations, you can begin to prepare suitable materials. In addition, you will need to think through many nuances: from wall decoration to lighting. Ready-made design projects will help you arrange the room competently, making the most of the usable space.

Features of arrangement in different rooms

The minimum room area for a wardrobe system is 2 m². This space is enough for a comfortable arrangement of hangers, shelves, and drawers. The optimal humidity level is 30–60% in summer and 30–45% in cold weather. The room is equipped with forced ventilation to prevent the appearance of mustiness, mold, and unpleasant odors.

Unfortunately, there is not always space in an apartment or house for a separate wardrobe system. In such cases, it is necessary to equip it in the most suitable premises:

1. Bedroom. Usually mobile hangers, open shelves, glass partitions are used, doors are replaced with curtains or screens. Advantages: convenience, all things are at arm's length. Disadvantages: the design can cause difficulties during the installation process, the impossibility of arrangement in small rooms.
2. Pantry. Suitable for creating a separate full-fledged dressing room. Manufacturing a storage system allows you to use all the usable space, install shelves, racks, racks, mirrors. Advantages: ability to accommodate a large number of things, ease of creation with your own hands. Cons: small passage, inconvenience when trying on clothes.
3. Hallway. A good solution would be to install a built-in structure; open, closed, and combined systems are acceptable. Advantages: the dressing room replaces bulky wardrobes and chests of drawers, the ability to store outerwear and other things. Disadvantages: suitable only for spacious rooms, complexity of construction.
4. Attic. The layout depends on the shape of the room. If the ceiling is at an angle, the racks are mounted along the highest or lowest wall. Advantages: large area, convenient storage and access to things, ease of arrangement. Disadvantages: you always have to go to the top floor to change clothes.

In private homes, space under the stairs is often allocated for a wardrobe system. Among the advantages of such a solution are savings on the purchase of furniture and the ability to use useful space. Disadvantages include limited space and difficulties with independent production.

Bedroom
Pantry Hallway Attic
Under the stairs

Selecting a layout

The design of the wardrobe system must fully comply with the parameters of the room. The location of the door, windows, as well as the geometry of the room must be taken into account. Among the most common varieties:

1. Linear dressing room. The simplest project is when the furniture is lined up along a blank wall or around a doorway. The entrance can be created using an accordion door, which does not require much space to open. For comfortable use, the depth of the dressing room should be at least 1.5 m. Advantages: ease of installation, spaciousness. Disadvantages: not very comfortable arrangement of things.
2. Parallel dressing room. Storage systems are located opposite each other, so a suitable space should have a width of 1.6 m or more. This option is relevant for elongated rooms in which the window is located opposite the door. The racks should be placed at a distance of 80 cm. Advantages: a large number of storage spaces. Disadvantages: not suitable for walk-through rooms.
3. U-shaped. Convenient for decorating spacious dressing rooms. The layout is ideal for long rooms. Advantages: excellent capacity, ability to use any storage systems. Disadvantages: not suitable for small spaces.
4. Corner. Allows rational use of rooms with limited space: children's rooms, bedrooms, attics, hallways. Thanks to the right angle arrangement, it is possible to place twice as many things on the shelves compared to the linear option. Advantages: spaciousness, filling areas that are often empty. Disadvantages: due to the small size, changing clothes will be inconvenient.

To make your dressing room comfortable and ergonomic with your own hands, you need to correctly arrange storage systems. A suitable layout is selected based on the individual parameters of the room, its geometry and other features. As a standard, the minimum passage width should be from 80 to 100 cm.

The smaller the area of ​​the dressing room, the more open compartments and hangers it should have.

Materials

The furnishings for the dressing room can be purchased ready-made. You must first measure the room so that the set fits perfectly into the free space. The following factory designs are popular:

1. Modular wardrobe systems. Pros: ease of use, affordable cost, attractive design that looks especially cozy in home interiors. Cons: you cannot change the location and height of the shelves.
2. Metal and mesh systems. Pros: the racks allow air to pass freely, the shelves can be rearranged, the materials are not susceptible to moisture. Cons: high cost, there are no limiters between the compartments, which can lead to things falling out.

Entrance area

The minimum width of the entrance opening should be 80 cm. Sliding doors, sliding systems or curtains are used to decorate the entrance to the dressing room. When choosing, you must take into account the features of each option:

1. Sliding doors. The products move along the wall, so they do not require additional space and help save space. Advantages: no thresholds, which looks aesthetically pleasing, safe to use, comfortable. Disadvantages: low heat and sound insulation, high maintenance requirements, difficult installation.
2. Sliding systems. Depending on the mechanisms used, there are folding, sliding, louvered, and techno-structures. Advantages: space saving, effective addition to the interior, ease of use, simple installation. Disadvantages: noise when moving the sashes, lack of tightness, high maintenance requirements, short service life.
3. Curtains. In some cases, the use of fabric curtains is the most practical and convenient. Advantages: lightweight material, does not take up much space, quick installation, interior decoration. Disadvantages: the ability to allow dust to pass through, the need for frequent washing and ironing.

A small dressing room will become visually larger when using mirrored doors. This technique will help you evaluate the appearance after trying on things if there is no space in the room for other reflective surfaces. Fabric options that match the color of the wall decoration perfectly camouflage niches.

Lighting

The question of how to properly organize lighting in a dressing room remains relevant. Experts recommend choosing lamps with a spectrum closest to natural sunlight. Optimal power is 10–20 W.

Halogen, fluorescent, and LED lamps are suitable for dressing rooms. Overhead light is provided by compact spotlights. Long chandeliers with hanging elements are not suitable for dressing rooms, as they will get in the way when trying on things. Mirrors, drawers and shelves, which are used most often, need additional lighting.

Stages of work

Decorating a dressing room with your own hands begins with creating a project and preparing for the work process. The following tools and consumables will be required:

• Screwdriver Set;
• drill;
• screws, dowels;
• hammer;
• building level;
• roulette;
• Wall panels;
• guides and rack profiles;
• plasterboard (moisture-resistant) with a thickness of 12 to 15 mm;
• mineral wool to create a frame;
• putty;
• mounting grid;
• wallpaper or paint compositions;
• wires for electrical wiring;
• lamps;
• switches, sockets.

The main elements for equipping the dressing rooms are being prepared: shelving, mirrors, drawers, rods. Suitable fittings are selected for sashes and storage systems. The work process consists of finishing the room and installing structures.

Preparing the premises

In an open dressing room, it is necessary to treat the walls against fungus. For this, a construction antiseptic or folk remedies are used: solutions of bleach, soda, vinegar. The best finishing option would be washable wallpaper. At this stage, it is necessary to carry out electrical wiring and arrange lighting equipment.

Special requirements are imposed on the flooring in the dressing room: aesthetics, resistance to deformation, durability, hygiene. Laminate, linoleum, and wooden boards correspond to them. Cold tiles and porcelain stoneware are not suitable, as well as expensive parquet, the use of which is inappropriate in this case.

The entrance to the dressing room can be open or closed. Modern options are sliding structures, portable curtains and partitions that harmonize with the overall design of the room. For a classic interior, a traditional wooden door is optimal; for a minimalist interior, a lightweight, almost invisible model. Arches look original, but when using them, things must be kept in perfect order.

The question of how to make a dressing room in a limited space is relevant for owners of city apartments. The optimal solution would be open storage systems, as well as division into zones or tiers:

1. Lower. Provides a width of 20–30 cm, located at a distance of 60 to 80 cm from the floor. Used for storing shoes, household appliances, accessories.
2. Average. Fits at a height of 60 to 200 cm. The middle level is the most easily accessible, so clothes that are worn most often are stored here.
3. Upper. Occupies a space of 180–200 cm and above, used for placing travel bags, suitcases, and out-of-season items that are rarely used.

A small room will be visually enlarged by light finishes, reflective and glossy surfaces. As a result of this decision, the boundaries of the room will “move a little” and the room will be filled with light. To expand the space, transparent doors and lighting built into the shelves are also used.

Popular are oval, trapezoidal, and rectangular mirrors, which are placed horizontally on opposite walls of the dressing room, above a table or cabinet. Floor options that reflect a person in full height are decorated with beautiful frames. To create an original design, reflective surfaces are used to finish the ceiling or floor. Placing them in door panels will help save space.

To figure out how to make a dressing room yourself, you need to choose a layout, create a project that matches the parameters of the room and the needs of users. The room will become more comfortable and attractive with a well-organized lighting system, a selection of suitable storage structures, and the use of high-quality materials. To create a dressing room with your own hands, beginners should take advantage of master classes, ready-made diagrams, and step-by-step instructions.

Video

Agree, it’s quite convenient when all things are placed in one place. There is no need to run around the apartment looking for individual items; everything can be seen and tried on in one place. You can arrange it even in a small area. A rationally arranged dressing room with your own hands (drawings, diagrams and photos will be presented below) will serve you well for many years.

Our comfort depends on a properly organized storage system. Agree, when every thing is in its place, it is easy to find. The main rule is space and convenience. But in small apartments this is difficult to achieve. Modern technologies come to the rescue, thanks to which modern ones are reduced in size; miniature flash drives have replaced books. All this frees up additional space.

Before you plan a permanent storage system, you need to sort your things. Items that we have not used for a long time can be disposed of or sold, and for the rest we can choose the optimal dressing room.

Storage rules divide things into two rotations.

• Hot– items of daily or frequent use. It's not just clothes. This includes boxes of shoes. The size of the storage area depends on their dimensions;
• cold These are items of seasonal or rare use. For example, travel bags, household items.

Installing a separate wardrobe is much more practical than purchasing one. It is made to order, which allows for the most efficient use of all space with ideal filling. You can install a dressing room with your own hands according to ready-made drawings and diagrams. Photo selections on the Internet will help you make your choice.

DIY dressing room drawings, diagrams, photos

After determining the basic parameters, it is necessary to complete a drawing and layout diagram. It will help determine the location of all structures as accurately as possible. The main parameter when drawing up a plan is the area. It is she who determines the filling of the dressing room.

Minimum sizes should start from 4 sq.m. First you need to determine the installation location. You can allocate a separate room for this. However, not everyone has this opportunity. A small dressing room from a closet in small apartments is an ideal option.

To install a dressing room, it is enough to arrange it in any room. As a clear example, you can refer to ready-made solutions for dressing rooms in photo catalogs and choose your ideal dressing room option.

Corner dressing rooms in the hallway

As we determined, the placement will make the most efficient use of the corner of the room. It is enough to allocate an island of 2 square meters for the dressing room. Photos of interesting projects are posted in our catalog.

The partition can be done. This arrangement provides sufficient volume in a minimal area. Drywall is easy to use, the design is lightweight, and there is virtually no debris after installation.

Internal filling can be done in two ways.

• All structures are lined up along one wall surface;
• the filling is installed harmoniously along both walls. This is a more preferable location as the space is used more efficiently.

Designers offer several options for corner elements, with the help of which maximum ergonomics of a small space is ensured. The installation of a spiral lintel will help increase the space and smooth out the sharp corners of the dressing room.

Advice! It is better to leave shelves in storage systems open.

In the design of a dressing room in the hallway, it is necessary to provide an entrance with a maximum width. As an option, a device that will allow you to open as much as possible and combine the storage area with the common space in one motion.

Linear layout is a simple and accessible design. The structures are built along the wall surface. This arrangement is more like a niche. The entrance can be made using an accordion door, which can easily slide to the side, revealing a small world in front of you.

Using retractable hangers will allow you to bring your clothes closer with one movement of your hand. For a comfortable location, the dressing room is planned to be at least 1.5 m deep. It is better not to install partitions; they will take up useful space without adding any functionality.

Racks are also used for corner systems. Ready-made ideas for wardrobe room designs can be viewed in galleries on the Internet.

Parallel type

To create parallel placement, you only need to arrange and fill the room with furniture along parallel walls. However, not all premises are suitable for this type. For example, for walk-through rooms this is an ideal option. A completely different matter is a blind room, for which it would be more practical to place a U-shaped dressing room.

For a comfortable location, the parallel dressing room must have a width of at least 1.6 m, otherwise it will be very difficult to stay there. The racks should be located at a distance of at least 80 centimeters.

The filling can be arranged with end hangers and retractable panels.

L-shaped walk-in closets

This arrangement does not require partitions. It can be made an integral extension of the room. Systems in the form of shelving increase the area of ​​the room.

Since the main cost of installing a storage system falls on the design of the partition, the L-shaped system allows you to significantly save money on the dressing room.

U-shaped wardrobes

The U-shaped system is suitable for both large and small spaces. This is a separate kingdom of the owners. You can install all the elements of dressing rooms in it: closed drawers, separate sections and shelving.

Arranging a U-shaped system allows the designer to show maximum creativity when filling the space. At the same time, the main task is to create a room with maximum space. For such a system, a narrow and long room is best suited.

To fill the dressing room, the upper shelves are made wider so that rarely used items can be placed there, such as travel bags or large boxes.

Dressing room in the bedroom

The installation of a dressing room is the most successful location of the storage system. If the area allows for the installation of one of the structures, you can safely begin to implement the project. Moreover, it is quite possible to do it yourself.

For a large area, a U-shaped design can be called ideal. It will unload the room as much as possible, while leaving enough space to move around.

An interesting solution would be to install a dressing room. Partitions can be made in the form of sliding structures or permanently.

If the bedroom area is very small, there is no need to be upset. He will come to the rescue. To place it you will need only about 1 meter of the width of the room. Properly selected filling will allow you to place all your household items in it.

For narrow spaces, a corner dressing room in the bedroom is suitable. Photos of designs are selected according to the overall design.

A parallel storage system is suitable for a walk-through room. You can make preliminary drawings and visualize the final design.

Construction of a storage room in a Khrushchev-era dressing room, layout with dimensions

Architects of the last century, when designing mass development areas, included a small storage room in small-sized apartments. Designers suggest converting it into a small dressing room. This is the most successful option for arranging an entire room for storing things.

The placement of the storage room in the Khrushchev house was carried out with an entrance along the long side of the common room or an end entrance. Let's consider both options for reorganizing storage rooms.

Placing the entrance along the long side of the room

Before filling the pantry, the old arrangement should be dismantled. To increase the width of the pantry, you can move the wall structure deeper into the room.

You should know! To transfer load-bearing structures, it is necessary to complete the project and coordinate it with the architecture of the area. Unauthorized redevelopment is not allowed!

A U-shaped or linear structure is placed on the enlarged area. A useful option would be to place a two-layer structure. Racks or shelves for open storage are attached to a long wall surface. In front of them is a hanging bar. In order to take things from the shelf, you just need to move them apart.

Placing the entrance at the end of the room

It is impossible to move structures with this placement. In this case, the choice of location system must be made based on the parameters of the pantry. If the width of the room is up to 1300 mm, you can arrange an L-shaped system. Open ones are installed on the narrow side. Along the long side there is a rack with hangers and drawers for storing shoes.

For a narrower space, a roll-out hanger is an excellent solution. Open shelves for storage are rarely placed on the end surface of the room.

used things. The hanger rolls out into the common room.

You can find an interesting option for creating a dressing room with your own hands from a closet in photo catalogs and master classes on the Internet.

Proper dressing room lighting

Good is important for the whole house and especially for the dressing room. It is advisable if the storage system is organized with a window. But, unfortunately, such placement is not always possible. Let's consider alternative lighting options to natural. It is important to choose lamps with warm lighting.

Photo	Description
	– with its help, the lighting of the room is maximum. In addition, it creates the illusion of a small boudoir. You can choose an exquisite chandelier made of dark glass or crystal.
	To create accents, halogen spotlights or LED bulbs are installed on the ceiling. The design and shapes allow you to choose them for any room interior. In addition, you can change the direction of the light emission as needed. Furniture spotlights are installed both on the canopy of the shelves and inside the surfaces, turning on when the dressing room or closet is opened.
	It can be fixed along the perimeter of the ceiling. It will effectively highlight all the hard-to-reach objects in the room. The tape installed under the shelves will give the appearance of a floating structure.
	The lamp in the form of a sconce can be installed near the wall.

This is interesting! Furniture in small dressing rooms can be made with glossy surfaces that will reflect radiation and create the illusion of volume.

Requirements for dressing room ventilation

The storage system requires sufficient ventilation. It’s good if there is a window in the dressing room. However, it is not always convenient to keep it open. You can leave the doors open. But, as practice shows, this is also not always convenient. In this case, the solution would be a natural or forced ventilation device. This work must be entrusted to specialists who will select equipment taking into account the area of ​​the room.

It will not only properly get rid of unpleasant storage odors, but will also protect against the occurrence of fungus or mold.

Doors for dressing room

Doors to the dressing room must be selected based on the overall style of the room. The design must be comfortable and reliable, because it will be used several times a day. Manufacturers offer a wide range of products, the choice of which can lead to a dead end.

Each storage system has its own recommendations for choosing doors.

Swing

To install them, free space is required along the opening direction. According to fire safety rules, doors must open into the common room.

Sliding

This design is suitable for small rooms. They do not require additional space. Door leaves move freely along horizontal guides. The structures are quite easy to install with your own hands. Photos of wardrobe systems are posted in the catalog at the end of our review.

Designs in the form of a book or accordion

In the first case, one part of the mechanism is fixed to the box, while the second moves on rollers. The system is in the form of an accordion or consists of several canvases interconnected by loops.

Sliding doors

The blades move on rollers along guides. One canvas is enough for a storage room.

Pencil doors

This is the most complex system. The canvas is hidden in a plasterboard box or in a wall surface. Externally they look very beautiful and unusual.

Filling the dressing room

Manufacturers offer a wide range of fillings for cabinets and dressing rooms. After all, not only the comfortable search for the necessary items, but also the service life depends on the correct placement. Therefore, it is important to rationally approach the internal content of the storage system.

Clothing storage systems

The middle compartment is selected for clothes. For placement on hangers, it is necessary to provide a height of up to 100 cm for shirts and about 170 cm for dresses and outerwear. Placement can be on rods and pantographs.

Small items are placed on shelves or in drawers.

Shoe storage systems

A lower compartment with a height of no more than 80 cm is allocated. Additionally, you can install horizontal or slightly inclined shelves. It will be convenient to install retractable structures, the height of which should be at least 30 centimeters for summer shoes and at least 45 centimeters for winter ones.

Related article:

In the publication of our portal you will find out what they are, what types they can be, and whether it is possible to install such structures in small apartments or whether they require a separate room.

Description of designs

By storing clothes and household items correctly, we extend their service life. Let's take a closer look at manufacturers' proposals for rational use of dressing room space.

Photo	Description
	Rods for long (up to 170 cm) and short (up to 100 cm) clothes.
	Pantograph is a sliding design.
	Fastenings for trousers with a height of at least 60 cm. Can be single or double. Hangers with tucks are suitable for skirts.
	Large and small drawers for storing bedding, linen, jewelry, accessories.
	Pull-out or stationary shelves up to 40 cm wide. To store things on the mezzanine, you can use shelves up to 60 cm wide.
	Boxes and baskets for storing various items that do not need to be ironed.
	Modular systems for shoes. Shoes are placed on them or hung visually on the lasts.
	Holders for ties, belts or scarves are usually offered with clips.

Where can I buy the filling?

Many furniture stores sell items for filling storage systems. It is important to first decide on the exact quantity and size of the products. A wide range of products is also available in online stores selling furniture fittings. The price will depend on the material used and the complexity of the filling.

Is it possible to install the filling yourself?

There is no need to call a professional technician to install the wardrobe filling. Even a schoolchild can do this work. The only tools you need are a drill and. All fasteners must be purchased along with the cabinet filling.

How to make a dressing room with your own hands?

The process of installing a dressing room is not complicated. Before starting work, it is important to complete the drawing with maximum accuracy and select all consumables and contents. The step-by-step process of installing an open structure will allow you to avoid installation errors.

Photo	Description of work
	Necessary tools for work.
	We place the supporting rail at the selected height, level it using a level along the bottom side and mark the locations of the holes.
	Drill out the marked holes.
	We hammer dowels into the holes using a hammer.
	We fix the supporting rail with a screwdriver
	Installation of vertical guides into the grooves of the horizontal rail.
	We fix the vertical guides to the wall.
	We install the brackets at the selected height.
	We install horizontal shelves in the middle grooves of the brackets until they click.
	We install decorative plugs on the edges of the bracket.
	We connect the rod and the suspension, then install plugs on the rod and hang hooks.
	Similarly, we install a basket with dividing strips and a shoe rack.
	Ready wardrobe.

You can watch the video master class in more detail.

A dressing room behind a curtain will help hide storage areas from prying eyes. Photo examples are posted in catalogs.

Wardrobe rooms: design, projects, photos

A dressing room in an apartment is no longer a luxury, but a necessity of late. The speed of modern life does not allow us to waste time searching for missing things. Everything should be rational and convenient. You can install a storage system in any room. The latest wardrobe room designs can be found in the photo selection.

1 of 24

How to make a dressing room so that things are stored in one place and you don’t have to look for them in different rooms and closets. Its installation does not require a large area; even in small apartments, if desired, there is a suitable place.

The advantage of a dressing room made by yourself is that it will be made in a way that is convenient for you to use, it will cost much less, because the work will be done using the material found in the house. Another positive side is that its presence will eliminate unnecessary furniture in the apartment.

Where to start making

There are many ideas for equipping a dressing room. There are all kinds of systems and devices for storing things. When getting started, you should think about and plan the progress of the work in advance.

Layout and drawing

You should start by determining the location, dimensions of the dressing room and a drawing of the plan, indicating the dimensions. A drawing is drawn on a reduced scale, the planned systems, fixtures, and drawers are inserted. Systems should be distributed ergonomically without overloading the space.

When planning, it is necessary to take into account the distance between the shelves:

• for storing things - at least 30 cm;
• for shoes (without heels) - 20 cm;
• for shirts, jackets, jackets - 120 cm;
• trousers - from 100 – 140 cm;
• dresses - 150 – 180 cm;
• coat - 180 cm.

On top, it is more practical to make shelves for things that are not used often. And below, a place for a vacuum cleaner is recommended.

The dressing room is not located in a walk-through room; it is better to place it between the bedroom and the bathroom.

Filling

With limited space, it is not recommended to make furniture from wood, MDF, or chipboard in the dressing room. This material will reduce the small area. Today, storage systems made of metal are popular; they are lightweight and modular. They are installed on special racks that are mounted on the wall, floor, or ceiling. The racks are equipped with many notches, with the help of which the height of the shelves can be quickly adjusted. Material for making shelves - wood, metal, plastic. The shelves are of the pull-out type.

These storage systems are sold, but are expensive. It’s more economical to make it yourself, from chrome-plated furniture pipe.

There are many options for arranging dressing rooms: rods for trousers, skirts, all kinds of shoe stands, drawers for small items. They are retractable - convenient and functional

Material selection

Suitable for production:

• Wood (chipboard) is a common material, able to withstand the load of things, absorbs moisture, and is economical.
• Plastic - plastic panels of different sizes are used.
• Metal - aluminum is most often used, it is light and durable. The structure is well ventilated. The cost is more expensive than chipboard.
• Glass - contributes to the visual expansion of space. Suitable for high-tech, modern style.

The finishing is made from any material: wallpaper, glass wallpaper, ceramic tiles.

When finishing, you should take into account the location of additional lamps for the shelves, making holes in advance. The built-in mirror in the door looks original

How to make a dressing room: open and closed type

When choosing a type, you should take into account all the nuances: location and rational use of space.

Open view

An open dressing room is a structure for storing things, not separated from the living space by a partition. It must correspond to the general style of the room. Recommended for use when there is a shortage of free space in small apartments.

The advantage of the open design is that everything is at hand. Minus - clothes gather dust, they should be placed carefully so as not to spoil the appearance of the room

Closed view

A closed dressing room is separated from the room by a wall and has doors. It ensures order in the room, since the contents of the cabinet are hidden.
The closed dressing room has a large area and has a well-thought-out organization of the storage system.

A closed wardrobe is convenient and allows you to try on and care for clothes right in the dressing room. The arrangement requires a large space, which is not possible in ordinary apartments.

DIY dressing room example

The first step is to note the height and width of the shelves and sliding doors in the niche of the future wardrobe. In our case, the depth of the niche is 1.4 m, taking into account the protruding box

The box is necessary to hide the pipes and install the water meter. Let's not forget to leave space between the shelves, because... titanium will be present in the dressing room. We also provided space for an outlet between the shelves.

• We purchased a 5x5 block to solve the problem of placing the rolling door. Reason: the ceiling height is 275 cm, but the suspended ceiling takes another 10 cm;
• We will install aluminum rails at the top and bottom for door mobility;

• In the Leroy Merlin hypermarket, where we shopped, there is a service for cutting shelves using a large machine. Having previously measured the length and width, and estimated everything on paper, we ordered shelves with a width of 30 cm and 60 cm. The service is very convenient, because shelves ready for installation will be delivered to your home. You will only have to use a hacksaw if the corners are uneven;

• Don’t forget about the addition for finishing the cabinet on top, which we buy in wenge color. The width of the extension is 10 cm. To attach the hangers, we purchase two round metal holders. We check again: the distance between the shelves is 40 cm, we fix the small corners 5 cm from the edge of the board. We place large corners immediately below them, so that later we can attach the end guide to the floor and wall (it will have to withstand a large load);
• We fix two large corners in width, and 4 in height. For this stage of work, we will take care of purchasing a level;
• We recommend using a long level. To install the end guide without any problems, you need to tighten the corners on the floor in advance. Don’t forget to measure the distance on the wall with a level. Then we proceed to installation;
• We initially planned to create a dressing room, although the box is made of plasterboard. Previously, aluminum guides were passed inside, which are attached using corners;
• We adjust the length of the aluminum guide using a hacksaw. On the right side of the wardrobe there is a rolling door that can slide to the side, and on the left there is a large shelf 60-2.70. Internal shelves are attached to the latter;
• Let us repeat that the top is trimmed with an additional 10 cm of wenge color;

• Inside the wardrobe, but on the left side, there is space at the bottom for boots and other shoes. There are also a lot of shelves installed here and a power outlet. We left room for titanium. Even further to the left is a niche with a depth of 25.5 cm. During installation, we used shelves 30 cm long so that more boxes could fit here;

Wardrobe type

Arranging a dressing room is an important point; you should take into account the installation location, and based on this, choose the type of model.

Angular

An excellent option if you have a free corner in the room. A corner cabinet is more practical than a straight one. It can accommodate: shelves, drawers, rods.

Zoning a corner cabinet is done in different ways. Finish the corner with plasterboard and make doors, hinged or sliding. It is possible to fence off a corner with doors, like a coupe

Linear

Linear - similar to a large wardrobe. Mounted along a wall where there are no window or door openings. It is fenced off from the room in several ways:

• plasterboard wall with sliding doors;
• sliding doors on the entire wall;
• cornice on the ceiling with a curtain.

A linear model with open shelving, looks great in a loft style room. The main thing is to successfully select the material and color scheme of the cabinet to match the overall interior.

U-shaped

U-shaped - ideal for a long room. On one side there is a bed, on the other there is a dressing room. It can be in the form of closets or as a full room.

Having fenced off the space, you should think about the lighting, divide it into 4 zones: for outerwear, shoes, short items and for trying on

Parallel

Designers recommend using this type in wide, long corridors. Consists of two cabinets facing each other.

A parallel dressing room can be closed, in the form of cabinets, or open, with racks and shelves

Wardrobe dimensions

The dimensions of the dressing room are determined taking into account its location and use. Ideally, it should have space for storing clothes and an area for changing clothes.
The optimal size is calculated individually, it is necessary to take into account:

• size, location, shape of the room;
• presence of a niche;
• location of windows and doors.

Measurements must be taken accurately so that no difficulties arise during the installation process.
The width varies and is calculated as follows:

• if the cabinet is on one wall, the width is its depth, plus the width of the doors;
• if there are no doors, but there are drawers, the width is two depths;
• when two cabinets are located opposite each other, the width is two cabinet depths, plus two door widths and a passage.

A prerequisite for size is that the doors must open freely and not interfere with unhindered entry into the room. If the dressing room is narrow, you should not make large cabinets

Ventilation and lighting for the dressing room

In the dressing room, ventilation is required, as odors will appear in a closed space. It should be planned in advance. There are two types:

• Natural - air comes in from below and comes out from above. To arrange ventilation, it is necessary to make holes in the closet, at the bottom and at the top, for air movement. This method does not always give full results.
• Forced - means installing a fan in the hole. It is better to install a forced hood - it will provide a suitable atmosphere for storing things.

The exhaust hole is made on the opposite side from the inlet. It’s great if the exhaust vent goes into the ventilation

The dimensions of the holes must be determined in accordance with the area of ​​the dressing room.
A wardrobe is not a closet, but a room with shelves and drawers. To quickly find the right thing, you need good lighting. Better, multi-zone:

• on the ceiling - general lighting;
• for illumination of shelves - additional rotating lamps.

The ideal solution is to install a motion detector to turn on the lighting. It's economical and convenient. And the lighting of the shelves looks beautiful and stylish

Doors for dressing room

When making a wardrobe with your own hands, it is important to choose the right doors. The comfort and ease of use of the room depends on a well-chosen model. Common types are:

1. Swing doors are practical, but require space. Protect from sunlight, dust, with a high degree of sound insulation. They are the most affordable in terms of cost.
2. Accordion doors are compact and fold like a screen. The structure is fragile and consists of many slats.
3. Compartments are popular, the movement of the doors is carried out along the cabinet, no additional space is required.
4. Roto door is a non-standard solution. Suitable for loft and hi-tech style. The door is installed on a special mechanism, which allows it to rotate around its axis and open in any direction. Free space is required for installation.
5. Pencil case - the doors are hidden in the wall, no extra space is required. Convenient for small apartments. But the installation of such a structure is complex; without experience, it is difficult to do it yourself.

Accordion doors look beautiful. They transform the room, adding some zest to the interior

The material for making doors is different:

• Wood looks aesthetically pleasing and is an environmentally friendly material. But a wooden door is heavy and expensive.
• Glass or mirror are popular today. Doors decorated with stained glass will decorate the room and make it larger.
• Plastic is light and cheap. Plastic doors are less durable and not as beautiful.

To make the door to the dressing room look stylish, it should be decorated with inserts of mirrors with a sandblasted pattern or elements of relief glass.

The door looks original and unusual, giving the apartment a modern, fashionable look. But not suitable for classic style

Arrangement: filling and storage systems

For the practical use of a dressing room, you should properly arrange it and select acceptable options for storage systems. You should not come up with complex, intricate designs.

Clothes placement system

There are different designs for storing things, the main ones include.

There are attachments for skirts, trousers and tie hangers, and clips on them allow you to secure the item. Very convenient if the hanger extends

Shoe storage system

There is always a lot of shoes in the house, it is important to organize a system for storing them, compact and convenient. The ideal solution is to place shoes on shelves or in special cabinets. It’s good if there is a compartment of the appropriate size for each type of shoe. And when using pull-out shelves, space is saved.

If space allows, it is worth equipping a full-fledged built-in shoe storage system. It has special shoe sections - convenient to use, shoes do not gather dust. Shoe racks are available in different sizes and have different installation methods, so they are easy to match to any dressing room.

An original design for shoes - it looks like pins with modules on a retractable frame. Compact and convenient system

Shelving

A rack is a structure consisting of racks and attached open shelves. Usually it is metal. Access to things stored on racks is free. Their main advantage is modularity. They vary in size and number of shelves.

Where to make a dressing room

Not every apartment has room for a full-fledged dressing room; you have to arrange it in the most suitable premises.

Dressing room in the hallway

It’s convenient to make a dressing room in the hallway; you don’t have to clutter the room with large wardrobes. A dressing room in the hallway involves storing outerwear, but if the space allows, you can arrange storage for all things. A good option is a built-in wardrobe, finished to match the walls of the hallway itself. A mirror is a must-have detail; you can’t do without it in the hallway.
You can do:

• Closed - a large wardrobe, often with compartment-type doors.
• Open - racks, shelves, hooks for clothes. The option requires maintaining order, since all things are in sight, but takes up less space.
• Combined - consists of closed cabinets and open shelves. Convenient, things that are not used often are put away in a closed part.

The dressing room in the hallway should be installed along a large wall. If the area is small, ideally - corner, from floor to ceiling

Arrangement of a dressing room in the bedroom

The bedroom is the room most suitable for a wardrobe. The models are different - with a large area, it is possible to make an entire dressing room. If the bedroom does not allow it, then it is better to use:

• open shelves and mobile hangers, decorated with decorative drawers;
• small built-in wardrobe made of plasterboard;
• partitions made of mirror or glass, which will visually enlarge the room.

A dressing room in the bedroom separated by a screen or curtain on a curtain looks good. This storage system is convenient in a small room

Design of a dressing room from a pantry

Making a dressing room in a closet is a good solution, especially for small apartments. It’s simple to do - you need to remove everything unnecessary, decorate it in a light color scheme (this will increase the space), replace the doors (preferably a compartment type) and fill it with: racks, racks, shelves.
Since the closets are small, you should equip them with mirrors, thereby making more space.

Dressing room in Khrushchev instead of a storage room

Khrushchevka is a small apartment with a standard layout. The only advantage is the presence of a storage room; it can be easily converted into a dressing room yourself. Depending on the size, you can make it into:

• built-in wardrobe - the niche already exists, all that remains is to install doors and install shelves and hangers;
• equip it with a full-fledged system for storing things - dividing it into zones and filling it with functional systems.

It is important to think about the arrangement of furniture and shelving. For rational use, space should be used from ceiling to floor

In the attic

The advantage of an attic dressing room is saving living space, the ability to collect things in one room, making them easy to find. In such a room there is room for all types of clothes and a fitting room.

The layout should be done based on the shape of the attic. If the attic is on a slope, then the dressing room should be located along the lowest or highest wall. Rational use of the attic is achieved with a corner dressing room.

Attic dressing room - the ideal solution, trying on in front of the mirror, choosing the right set of clothes in comfortable conditions

It is possible to organize convenient storage for things almost anywhere. It’s not difficult to make your own dressing room by separating part of the room with doors, chipboard leaves, and drywall. But this method is not acceptable in standard apartments, but in them there are often niches - an almost ready-made dressing room, the main thing is to arrange it correctly.

It is easier for the owner of private houses, if space allows, you can devote an entire room to a dressing room; an attic space is especially suitable. Experts recommend zoning the space.

The advantage of a do-it-yourself dressing room is the opportunity to design it for yourself, providing for the zones and elements that will be needed. In addition, the opportunity to show your design skills and create a one-of-a-kind dressing room.

The appearance of the dressing room located in the room must correspond to the general style, otherwise the interior of the entire room will suffer

Photo gallery

Video

A dressing room is every girl's dream . In a large house, you can set aside a free room for it. What to do if every square meter in an apartment counts? The Dekorin team offers various layout options. Take a closer look at ideas that will help make your dreams come true. We hope that we will inspire you to make pleasant changes in your home. Light up!

Wardrobe room projects - photos with examples

A good dressing room layout is a great way to make efficient use of space. This frees a small apartment from the need for bulky cabinets, bedside tables and chests of drawers.

When planning a dressing room project, consider:

• type and arrangement of furniture;

  how many people will use it.

In a private house, feel free to allocate an entire room and arrange it with maximum convenience for all household members. It is best to place furniture around the perimeter of the dressing room.

Find a place for ottomans or even an ottoman - this will make it more convenient to put on clothes. A large chest of drawers in the center of the room is very helpful. It can accommodate organizers for small items of clothing and accessories. Be sure to consider the placement of one or more large mirrors.

The design of the dressing room can be done in any style direction. The main thing is that you like it. Like this, for example.

Wardrobe room layout - photos with options

For a woman, a personal dressing room means the whole world. It's easy to forget about time here, trying things on for hours. Generally speaking, you can make any layout for your dressing room. You need to rely on your feelings. You should feel comfortable being there.

Among the most common methods are:

angular. Suitable for rooms where you can occupy one of the corners;










U-shaped. Fits perfectly into elongated rectangular rooms. This is the most spacious option;





L-shaped. Can be used both for arranging a dressing room in the corner, and for a narrow room, leaving one of the walls free;




linear. A win-win option for small rooms - today, by the way, it’s in trend;









parallel. This method is used if there is an unused passage room in the house.

You can also arrange a dressing room in an original way in the attic. There is a special atmosphere there, and there is enough space. See how it can be.

You can also rationally use the space under the stairs, balcony or loggia.

In a small "Khrushchev" apartment, sacrifice a storage room. As you can see, the main thing is to set a goal. And the result will pleasantly surprise you.

How to arrange bedroom with dressing room

It is very convenient when the dressing room is located in the bedroom. In a long room, you can separate part of the space. This will correct the geometry of the space and solve the issue of placing things.

The linear option is best used when area is limited. This could be a niche, a wall at the head, next to or opposite the bed.

It will be interesting if you place the bed diagonally in the room. In this case, a corner is formed at the headboard, which can be used under the wardrobe system. Look at the photo - great, isn't it?

Small dressing room - photos with examples

For a very small room, the ideal solution would be an open-type dressing room. The “trick” is that the things here serve as interior decor. The advantages are obvious:

you don’t need to look for anything for a long time - everything is in sight;

no need for bulky cabinets;

Precious space is not wasted.

But there are also disadvantages:

things must be perfectly laid out and hung - otherwise the room will look sloppy;

you will have to regularly monitor cleanliness so that dust does not settle on your clothes;

You will need to constantly monitor the arrangement of things by color.

It is better to keep the design of a small dressing room simple, without overloading it with unnecessary elements. So visually the room will seem more spacious and airy.

How dressing room dimensions influence its design

When decorating a dressing room, you need to take into account its size. A separate room can be decorated in any style. Eg:

neoclassical - looks stylish and expensive;

Provence - everything is simple and tasteful without any special frills;

loft - suitable for small spaces;

boiserie - you can resort to this style if the area is large enough.

But in the case when the dressing room is part of the room, its design should continue the style of the interior.

allocate living space with an area of ​​more than 4 m² to a U-shaped system;

if you have more than 3 m², you can design a corner dressing room;

It is better to make the layout of a dressing room with dimensions 2x1.5 angular or linear.

Many home owners include a dressing room at the design stage. In a small room for all-season items, you can store a variety of clothes, shoes, and accessories in ready-made form for trying on and choosing a harmonious combination. Multifunctional furniture is placed according to ergonomic principles, which allows the dressing room to fit into even the smallest apartment. For its arrangement, 2 m² is enough.

Benefits of a dressing room

Any items of clothing that were previously stored in closets and chests of drawers can be successfully placed in a small room. Thanks to the compact arrangement, the presence of convenient shelves along the walls and hangers, you can immediately select matching items. If space allows, an ironing board, a fitting screen, a mirror, and a table for small items are installed here. This type of organization for storing household items has many advantages:

• Simplified sorting and storage of clothes;
• Thanks to open shelving, you can see all the elements at once;
• Quickly search for the desired item;
• The ability to change clothes without leaving the dressing room;
• Mobility of shelves and drawers, they can be moved depending on the season;
• Possibility to use as a pantry, store a vacuum cleaner, suitcases;
• Saving space in the bedroom, hallway, living room;
• Saving money and time. Building a dressing room with your own hands according to a design is much cheaper than buying several chests of drawers and sliding wardrobes.

Accommodation options

Each person has enough things to organize a single place for storing them. This could be a budget rectangular room or a spacious designer room. There are many convenient accommodation options.

To choose the most suitable place, you should first decide on the number of things. It is necessary to think about the area - whether the clothes of all family members, bed linen, and bath accessories will be stored there. You should also consider the type of construction, the possibility of conducting electricity, ventilation, and the need for doors.

In the bedroom

Wardrobes in the bedroom can exist in several versions. More often there are large cabinets built into the wall, which are fenced off with partitions. In small rooms, storage space is simply separated by sliding structures made of plasterboard and plywood.

The wardrobe will fit perfectly into the overall design of the bedroom if you choose the right place for it. First of all, it is necessary to plan the placement of large-sized furniture, beds, cabinets, tables. You can level out the space of narrow, elongated rooms by zoning and fencing off the sleeping area. In this case, the storage area is located on the main territory. In square rooms, you can build a wardrobe next to the bed, on the adjacent wall without a window.

The design of a dressing room in a bedroom should be light and aesthetic. The heaviness of large structures and massive crossbars can be smoothed out with decorative elements. Glass and mirror doors will be beautiful and practical. An excellent option for the bedroom is an open dressing room. Things are always in sight, which allows you to quickly plan your look. If they need to be hidden, use a movable partition.

From the closet

Wanting to optimize space, owners of standard apartments often convert the pantry into a dressing room. In this case, the design and location of storage for things depends on the original layout. The refurbishment process involves removing old shelves and installing new ones. It’s easy to turn a small pantry into a functional, comfortable room by placing several shelves and hangers in it. There is a place here not only for clothes, but also for household items that create visual interference in the interior.

To arrange a pantry, you can use any available material. Before starting work, you need to assess the general condition of the room, strengthen the walls, improve the ceiling, and update the flooring. It is better to make new shelves and racks from plasterboard, having previously thought through the design scheme. As decoration, you can use paints and varnishes, adhesive film, and light veneer.

If the old storage room is located at the end of the corridor, you can simply remove the doors, leaving three walls. In a niche it is appropriate to place a wardrobe with shallow shelves and several crossbars for hangers on the sides. The pantry at the front door, near the kitchen must be covered with a door or curtain to prevent the penetration of foreign odors and prying eyes.

In the corridor

It is unlikely that you can make a large wardrobe in the hallway, so you need to think about its functionality and capacity. It is necessary to have a wardrobe compartment, drawers, open and closed shelves. It is necessary to take into account that things of permanent use and seasonal ones will be stored in such a cabinet. It is better to place everyday clothes on open shelves, in plastic containers. There should be a place under the ceiling for rarely used items.

The choice of a suitable location for a large closet is influenced by the layout of the apartment and the design of the corridor. The appearance and type of construction are adjusted to these parameters. Apartment owners prefer to assemble structures of the following type in their hallways:

• With open shelves. This option visually expands the space;
• With closed cabinets and drawers. Eliminates dustiness of things, there is no need to pack shoes and clothes;
• With swing doors. Fits well into classic interiors. Not suitable for narrow corridors;
• With compartment doors. A great way to save space. The doors can be attached to a furniture frame or ceiling.

For the convenience of storing shoes and accessories, you can supplement a wooden or plywood structure with a pencil case. A narrow and tall piece of furniture will not take up much space in the hallway and will fit well into the overall interior of the room. The outer surface can be decorated with a mirror and hooks.

From a niche

Even in the smallest apartment you can make a dressing room. A great option is to equip a convenient and stylish storage for clothes in a niche. A simple design can be made independently from solid wood, plasterboard, and plastic panels. Any of these materials will withstand the expected load and resist mechanical damage well.

A niche wardrobe can be closed or open. Sliding doors are decorated with mirrors and any light-reflecting elements. This makes a small room seem more spacious. It is better to equip doors of swing models with weighting accessories from the inside. An open closet can be hung with a designer curtain.

On the attic floor

Heavy, massive wardrobes can hardly be considered a worthy interior decoration. They are being replaced by simple, lightweight designs. Original dressing rooms can be placed in the most unusual place, for example, on the attic floor. A bold decision requires the investment of considerable funds. A technically complex dressing room has both advantages and disadvantages. The positive points include the following:

• Possibility to place a large wardrobe system;
• Huge scope for the implementation of the most unusual projects;
• The room is located away from the bedrooms and living room, which gives it a special personality;
• You can create an interesting recreation area by adding original decor to the room;
• Excellent illumination due to its favorable location, good energy savings.

Unfortunately, this idea has many disadvantages. This is the complexity of insulation, the high cost of laying pipes. It is uncomfortable to try on outfits in an unheated room; temperature changes and high humidity will negatively affect their quality. It is necessary to constantly monitor the integrity of the roof covering, otherwise a sudden leak will ruin the entire wardrobe. The main disadvantage of such a complex in the attic is the significant distance from the entrance. For frequently used clothes and shoes, it is better to provide a place closer to the entrance.

Under the stairs

This arrangement of the dressing room is practical and convenient. This option is suitable for private houses with several floors. Using various modular systems, you can achieve amazing results and build original storage for all kinds of textiles, accessories, and household appliances. To make it easier to place clothes, you can use one of the following systems in the dressing room under the stairs:

1. Hull. Wooden panels and shelves are assembled into a single structure. An open, closed wardrobe will look good in a classic interior;
2. Mesh. Easy to install, the honeycombs create a feeling of lightness and mobility. The cells are usually left open, which expands the space;
3. Frame. Hangers and shelves are attached to special beams and profiles. The installation is reliable and easy to install;
4. Panel. It is created from parallel panels attached to the wall. There are no restrictions between shelves or any partitions. Such a cabinet will look good in a minimalist style.

Many private houses above one floor have a storage room under the stairs. This nondescript room can easily be converted into useful clothing storage. When carrying out work, the general style and wishes for neutrality should be observed.

Materials and filling of the dressing room

A simple wardrobe complex can be assembled from a variety of materials. Wooden sheets, plastic, and metal are most often used. The finishing material is chosen based on the location of the room and the overall interior. You can decorate a clothing storage room with glass wallpaper, lining, ceramic tiles, decorative stone and more. In the shelves and racks, it is necessary to make fastenings and side holes in advance for mounting lighting fixtures.

For ease of use, wardrobes are filled with all kinds of devices for storing clothes and other necessary items. Thanks to simple devices, the frequency and process of cleaning the room is simplified, you can always quickly find the necessary thing. Convenient filling will allow you to keep dresses and suits always ready for trying on. The most functional models contain the following content:

• Drawers;
• Standard, high bars;
• Boxes and baskets;
• Modules for shoes, overshoes;
• Hangers for ties, belts;
• Mirror, lighting, table, chair.

Each filling system has its pros and cons, so maximum comfort can only be achieved by following the principles of ergonomics.

Wardrobe projects

The location of the wardrobe complex in the room must be accurately calculated, since the design, the purpose of which is to save space, should not take up a single extra centimeter. Thanks to zoning, you can fit all summer clothes, shoes, voluminous jackets and fur coats. For each type and size of wardrobe, a different way of delimiting space is suitable. To successfully create your own corner for comfortable storage of things, you need to familiarize yourself with standard wardrobe designs:

• Corner layout. Can be organized in any room of the house or apartment. The main advantage of the model is the ability to place a large number of things without losing space or blocking useless corners. Wardrobes can be built in or placed as free-standing pieces of furniture. The models are filled with shelves and hangers right up to the ceiling;
• Parallel. It is distinguished by functionality and ease of project implementation. You can assemble the model with a frame cabinet and partitions. Ideal for a long, wide corridor and other rooms of a similar type;
• Linear. Looks like a regular wardrobe. It can be placed along any wall. Due to its elongated structure, it has limitations in the placement of additional items (ironing board, table). You can only move along a narrow passage;
• U-shaped. A spacious room is created due to excess space. It can be filled with racks of various sizes, hangers, large baskets and drawers. Such a wardrobe is separated by a traditional partition or interior door.

Stylistic and color design

Rooms and wardrobes for storing clothes differ not only in size and design, but also in stylistic and color design. You can immediately purchase suitable finishing materials and decorative elements or create an original dressing room according to a special project.

The cabinet in the style of an ancient classic looks impressive and aristocratic. The noble coating is created using special wood staining techniques. A traditional brown, natural beige shade will do. Provence furniture is replete with simplicity, playfulness, and floral patterns. Suitable colors are yellow, green, pink. A modern wardrobe will fit perfectly into any modern design, and a neoclassical wardrobe will harmonize with all classic interiors.

Complexes for storing clothes in oriental style are decorated with textiles and natural wood. You can only use natural muted shades. Boiserie style cabinets emphasize their simplicity and practicality. The color of the structure to match the wall decoration will help hide any surface imperfections.

Stages of self-organization of a dressing room

Before starting work, be sure to draw up a detailed design diagram and foresee possible problems during installation. The finished project must contain detailed information with the features of the room, the material used, and accurate calculations. You should also prepare fasteners, tools, decorative materials, and consumables in advance. The finished wardrobe frame will not be functional enough without additional devices and finishing. All stages of independent organization must be clearly distributed.

Planning

Having decided to create a cozy and convenient dressing room, first of all you need to evaluate the importance of the new design and carefully plan your actions. The main criterion when choosing size and location is the number of people who will use it. You should also take into account the need to place household appliances and seasonal items in the closet.

At the next stage of planning, it is necessary to estimate the volume of already sorted items and determine a place for each group. This will help to provide the required number of hangers, rods, drawers, baskets. The length of the longest clothing that will be stored in an extended state should be taken into account. Filling equipment must be planned with some reserve.

The final stage is the creation of a drawing. All of the above points must be reflected. For greater clarity, you can create a wardrobe layout in a special computer program or simply glue it together from cardboard. This will create additional opportunities for maneuvers and allow you to change places.

Lighting

A spacious closet for storing clothes and shoes needs high-quality lighting more than other rooms, since most of these projects do not have windows. In a bright dressing room it is easier to navigate and look for the things you need; the color of bright T-shirts, trousers and dresses is not distorted, which allows you to safely create ideal looks without leaving the room.