How to distribute wired Internet from a computer to a phone. How to distribute mobile Internet from an Android smartphone to other devices? Method without Root access rights

First we need a smartphone with Internet access. Both smartphones must have working WiFi receivers. Make sure the signal strength is sufficient for stable operation networks. The Internet speed on the phone that receives the distribution is always lower.

The startup process differs between operating systems. To distribute the Internet with ISO OS, proceed as follows:

1. Go to the “Settings” menu, and from it - to cellular communications.
2. Find the “Modem Mode” sub-item just below in the tabs.
3. Activate the mode using the switch.

With older versions of the operating system, the process may differ, but not radically.

If everything is done correctly, a message will appear stating that other users will be able to search for your shared network using Bluetooth or WiFi. The name of the public network is also indicated here. Below under the help is the password for connecting. The user can install any other one.

Note! If it is impossible to enable modem mode, the mobile Internet package probably does not provide a distribution service. To clarify this, contact your operator.

Now your iPhone has turned into a full-fledged WiFi access point. You can connect to the Internet from any device: phone, laptop or tablet. Just find the one you need among the networks and enter the specified password.

How to share internet on Android?

Setting up Internet distribution from an Android smartphone follows a similar principle. As in the case of iOS, go to “settings”:

1. Select the “More” item and find the “Modem mode” sub-item in the list. Let's go;
2. There we see three ways to distribute WiFi: via Bluetooth, WiFi and a USB cable. We need WiFi. Activate;
3. The access settings window appears. The fields SSID (network name), security level (WPA2 by default) and a password field appear. We come up with a password and click the “save” button.

Note! By default, the system sets the AndroidAP network name and password 00000000. Knowing this, you can easily connect to any network whose distributor has not changed anything in the settings at all. If you want to protect your access point from intruders and simply unauthorized access, change the standard name and password.

Setting up Internet distribution from phone to tablet

Using the methods described above, you can transfer WiFi to any devices nearby. It could be another smartphone, Personal Computer, laptop, tablet or any other gadget with a working WiFi receiver. Your phone literally turns into wireless modem. The receiving party connects to it in the same way as to any other access point.

If you followed the instructions above exactly, but other devices still do not see your phone’s access point, you need to fix the problem. This really happens. Let's look at the most common problems and ways to solve them.

Now you know how to distribute the Internet from your smartphone to other devices, and what the problem is if other gadgets do not see the access point. Stay with us to learn even more interesting things and share your experience in the comments.

Today we will tell you how to distribute the Internet from an Android smartphone via Wi-Fi, USB and Bluetooth, as well as how to connect to it on other devices.

And if everything is quite simple with the distribution, it is implemented using standard Android functions, then to connect you need to make some settings. This is discussed in more detail below in the article.

How to distribute the Internet via Wi-Fi on Android

To make out Android smartphone point Wi-Fi access, you need to go to Settings and in the “Wireless Networks” section, click “More...”.

After that, open “Modem Mode”.

Next to the “Wi-Fi access point” checkbox. Now your phone will start distributing the Internet via Wi-Fi.

If you want to change the network name, security method or password, in the same menu, click “Wi-Fi hotspot settings”.

I think there is no need to tell you how to connect to the distributed Internet via Wi-Fi on Android or Windows - you already know very well how to do it. Next we’ll talk about ways to distribute the network using USB and Bluetooth.

How to distribute the Internet from an Android phone via Bluetooth

Similarly, as in the first method, go to “Settings” → “More...” → “Modem mode”, but now select the “Bluetooth modem” item.

Most importantly, don't forget to make your device visible. To do this, return to the main settings menu, open the “Bluetooth” item and turn on visibility on your tablet or smartphone.

After this, you can distribute the Internet from your Android phone or tablet via Bluetooth.

To connect to a network distributed via Bluetooth on another mobile device under Android control, you need to install the BlueVPN app. .

When you open it, you will see a list of Bluetooth devices: just click on the one you want (from which the network is distributed via Bluetooth) and connect to the Internet.

How to distribute a network from an Android smartphone or tablet via USB

Again, go to “Settings” → “More...” → “Modem mode”. But now we select the “USB modem” item. This item will be hidden until you connect your Android device to your computer using USB cable. When you do this, simply check the box next to “USB tethering”.

Now, to distribute the network from your Android smartphone via USB to your computer, go to the list of connections on your PC and select the one you created.

OK it's all over Now! As I said, there is nothing complicated in this procedure. If you have any questions, please ask in the comments.

The modem mode in modern phones allows you to “distribute” the Internet connection to other mobile devices using either wireless connection, and through USB connections. Thus, having set up general access to the Internet on your phone, you may not have to purchase a separate 3G/4G USB modem in order to access the Internet at your dacha from a laptop or tablet that only supports a Wi-Fi connection.

In this article, we will look at four different ways to share Internet access or use an Android phone as a modem:

On mobile operating system Google Android has a built-in function for creating a wireless access point. To enable this function, go to the settings screen Android phone, under Wireless & Networks, click More, then open Tethering. Then click “Set up Wi-Fi hotspot.”

Here you can set the parameters of the wireless access point created on the phone - SSID (Wireless Network Name) and password. It is better to leave the “Security” item at WPA2 PSK.

Once you have finished setting up your wireless access point, check the “Portable Wi-Fi Hotspot” checkbox. Now you can connect to the created access point from a laptop or any Wi-Fi tablet.

Internet access via Bluetooth

On the same page Android settings You can enable the “Internet sharing via Bluetooth” option. Once this has been done, you can connect to the network via Bluetooth, for example, from a laptop.

To do this, make sure that the appropriate adapter is turned on and the phone itself is visible for detection. Go to the control panel - “Devices and Printers” - “Add a new device” and wait until your Android device is detected. After the computer and phone are paired, right-click on the device in the list and select “Connect using” - “Access Point”. For technical reasons, I was not able to implement this myself, so I am not attaching a screenshot.

Using an Android phone as a USB modem

If you connect your phone to your laptop using a USB cable, the USB modem option will become active in the modem mode settings on it. After you turn it on, a new device will be installed in Windows and a new one will appear in the list of connections.

Provided that your computer is not connected to the Internet by other means, it will be used to access the network.

Programs for using your phone as a modem

In addition to the already described system Android capabilities to implement Internet distribution from mobile device different ways, there are also many applications for the same purpose that you can download from the application store Google Play. For example, FoxFi and PdaNet+. Some of these apps require your phone to be rooted, some don't. At the same time, the use of third-party applications allows you to remove some of the restrictions that are present in “Modem Mode” in the Google Android OS itself.

This is where I will conclude the article. If you have any questions or additions, please write in the comments.

Many of us don't have Wi-Fi routers, and I want to fully use the Internet! What to do? And everything is very simple! We need to distribute via USB!

Our actions:

3. Connect android device to USB

4. Enable USB debugging. To do this we go to Settings -> Applications -> Additional options->USB Debugging. We put a tick.

*5. Turn off USB storage mode

6. Go to your phone Settings -> Wireless connection-> Mobile networks. Against Data transfer uncheck the box.

7. Go to your phone Settings -> Wireless -> Tethering/Access Point Sharing. Against Shared USB modem check the box*. If you cannot complete this item (do not check the box), restart the device.

8. The computer should recognize the phone as a network adapter/modem - drivers will be installed automatically - wait until they are installed (if some drivers are not installed, that’s okay)

9. In the window that appears, select home network, if nothing appears within 2 minutes after installing the drivers, skip this step.

10. Right-click the Internet status icon and click Network and Sharing Center

11. You should have a new connection.

12. Now you need to distribute the Internet to your phone - go to Internet connection settings computer!

There we click the Properties button, then click on the Access tab, and check the box to allow the phone to use the computer’s Internet - then select where we will distribute the Internet, and also click the Settings button, and check all the boxes, in the windows that appear, click OK

*If it is enabled and available on your device at all

13. Launch earlier installed application Terminal emulator

14. Write the commands (don’t forget to allow root rights when prompted):

15. The addresses will appear in the USB0 line. Write down the IP Address and Network Mask.

(For example 192.168.42.129 255.255.255.0)

16. Open Internet connection settings, as in point No. 12.

17. In the window that appears, click the Properties button, then click Internet Protocol version 4 TCP/IP

18. In the window that appears, put a dot in the Use the following IP address position and enter the IP that the Terminal Emulator gave you, but at the end of this IP we write not the number that this program displayed, but1

19. We save everything, apply it and go to the phone.

20. Open the Terminal Emulator program

21. Write the following commands (don’t forget to allow root rights when prompted).

It is worth noting that 192.168.42.1 is what we have in the Internet Protocol settings window on the computer in the IP address field. That is, we enter your address.

22. Enjoy unlimited internet on your phone

After all these shenanigans, you need to reboot the device and after turning it on (and every time you want to access the Internet via USB), perform only these steps:

1. Connect your phone via USB

2. Enable debugging

3. Enable USB modem

4. In the terminal emulator, write:

ATTENTION!- 192.168.42.1 this IP is different! Here you enter what you wrote down in the Internet Protocol settings window.

3 people liked the post

Reading time: 6 minutes. Views 132 Published 05/11/2018

Modern tariffs mobile operators and the quality of the mobile Internet make it possible to use the latter not only from smartphones or tablets, but also to organize distribution for home PCs or laptops. This state of affairs is especially relevant in regions where there are 4G and LTE coverage areas. A small question remains,to other devices. Let's talk about this in more detail.

Distribution settings from an Android device

The need to distribute Internet from a mobile phone may arise due to various reasons. Most often, users use such smartphone capabilities when or simply stops working. Before you start setting up, make sure that the connection quality and speed of your mobile Internet are at the proper level, otherwise the idea will be a failure.

Today, several configuration options are available for Android devices: via WiFi, via a USB cable or as a Bluetooth modem. Moreover, the second type of connection is not suitable for distributing the Internet to several devices at once. Let's take a closer look at the specifics of setting up each connection type.

Via WiFi

This option for organizing Internet distribution from your phone is the fastest and easiest. In this case, the smartphone acts as a router and, with the proper signal level, can provide several devices with access to the network at once. If your phone only has 3G, then you should be prepared for the connection speed on your PC to be quite low.

To set up distribution, follow these steps.

After this, the access point will become active and devices will begin to see it. To connect to the network you must specify a password. You can find out the combination in the WiFi access point settings. Open the section and under the password field, check the “Show” option. After this, the symbols of the protective combination will become visible.

USB modem

If you have a cable at hand, then one of the devices can be provided with network access. Let's figure it outhow to share internet from phoneusing this type of setting. There is one small device; special drivers are required to organize the process. Usually when turned on desired mode they are installed independently; if this does not happen, the user will have to find and download them separately. The software can be googled without any problems by specifying the phone model and the problem that has arisen.

To set up the connection you will have to perform the following steps.

At this point, the settings on the smartphone side are completed and you need to go to the computer configurations. Open the network connection settings menu, on the “Connection via local network» Right-click and select Enable. After this, the computer will be connected to the Internet via your smartphone. Make sure that the amount of available traffic allows full operation of the network from your computer.

Bluetooth modem

Another option is Internet access via a Bluetooth modem connection. Let's find outhow to share internet from phonein this case. There are also some subtleties here. Before setting up, you should make sure that the Bluetooth module is active on all devices. The visibility of the smartphone is also open to search for available gadgets. These settings should be checked additionally before proceeding with the main one.

The further process is as follows.

1. Open your smartphone's settings and go to the "Modem Mode" section. The path has already been described in detail earlier.
2. In the window that opens, check the box next to the “Bluetooth modem” item. This completes the manipulations on the part of the mobile device.
3. On your computer, open the “Control Panel”, go to “Devices and Printers” and click on the “Add Devices” command.
4. As soon as the computer detects the smartphone as a device available for connection, you must confirm the pairing and give permission to use the device as a Bluetooth modem.
5. Then, in the “Devices and Printers” section, right-click on the smartphone icon to bring up the context menu and in the “Connect via...” setting, select “Access Point”.

At this point, the connection is completed and the computer has access to the Internet through the mobile gadget.

If we compare all three types of connection, WiFi will be the fastest and easiest. But it is quite energy-intensive, so if there is no outlet nearby, it is better to use a USB modem, in this case the battery consumption is less, but the connection speed is slightly behind the previous one. Connecting with the third method should be used only as a last resort, when the previous ones are not suitable at all. The connection speed in this case is very low and you will have to wait a long time for the page to load.

How to distribute the Internet from your phone: settings for the iOS platform

Now let’s figure out how to organize Internet distribution from an Apple mobile device. The instructions are suitable for the latest versions software and on older firmware it may not be relevant.

First of all, you need to make sure that the smartphone itself has access to the Internet and the signal quality matches established requirements. In this case, the cellular network icon in the settings section will be Green colour.

1. Go to your iPhone settings and select the Cellular section.
2. Open “Modem Mode” and activate the function by placing the switch in the appropriate position. Some operator tariff plans cellular communication may block the ability to distribute, in which case the switch will be inactive.
3. After successful activation, instructions will appear on the smartphone screen for connecting your PC to the network in different ways.
4. Connect your computer.

To connect via WiFi, just find an access point and enter a password. To use a USB cable for connection, you will have to install latest version iTunes applications and establish trust between devices. Only a computer or Android smartphone can be connected to an iPhone via Bluetooth; it is better to connect iOS devices via WiFi.

Now it is no longer a secret for the readerhow to share internet from phone. All instructions are discussed in detail and recommendations are given. It is important to understand that the connection speed will not be the best, especially if the smartphone is not connected to a 4G or LTE network. How often do you have to set up distribution? In what circumstances does it become necessary and which connection option do you most often use?