How to open the intercom with. Programming Vizit intercoms or how to get home without a key. How to open Eltis intercom without a key

Today, installation and maintenance companies pay great attention to issues of not only the convenience of device users, but also the overall reliability and vandal resistance of the access control solution.

It is in matters of unpretentiousness and reliability, as well as minimal possibilities of unauthorized access, that one of the leaders is the KS intercom.

These devices have a fairly impressive list of advantages, both from the installer companies and from ordinary residents of the entrance.

Features of KS intercoms

KS intercom can confidently take a leading position in terms of technology.

In design:

1. modern polymer glass to protect the miniature display;
2. completely contactless, maintenance-free keyboard, contact is detected by infrared sensors, finger position is tracked by software;
3. the front panel is a solid piece made of durable metal;
4. The display is clear, bright, and positioned so that information can be viewed through the protective glass without distortion from any angle.

KS entrance intercom 2006 devices can work with two types of keys, both the usual Touch Memory tablets and contactless ones (Proxy modification).

Also, all models have a convenient feature for installation companies: the equipment is compatible with a huge range of magnetic locks and can work with tubes from different manufacturers.

The entrance KS intercom works reliably at temperatures from -40 to +55 degrees, is easy to install, is protected from moisture, and guarantees reliable operation of the finger position detector in the presence of a wide variety of interference in the coverage area of ​​infrared sensors.

Opening these devices, as well as opening intercoms, is quite difficult. However, under certain conditions, getting into the entrance, changing personal codes, and carrying out certain types of programming is quite possible.

How to open a KS intercom without using keys

Like all devices for controlling entrance access, there is a standard KS digital intercom code.

The instructions for installers require changing this set of numbers. Even the documentation for specific device models takes into account that the master sets his own personal number for access to programming and service functions.

However, the KS factory intercom code for some models is quite complicated, so installers often do not bother changing the standard sequence. Therefore, you can get into the entrance using one of the digital combinations.

There is also the simplest, but time-consuming way to open a door with KS intercoms. It works on all models with a contactless keyboard, including Akrades modifications and others.

To unlock a magnetic lock, you will need:

• block more than two openings for the passage of IR rays;
• wait 10 to 12 minutes;
• After Err appears on the display, wait another 45 seconds. It is at this interval that the intercom will begin to turn the lock’s power on and off for 10-15 minutes.

The holes behind which the IR LEDs and tracking sensors are located are located at the end of the recess in which the device’s keyboard is located.

They have a very small diameter. The instructions for the KS system clearly indicate that the transition to emergency mode occurs only when 2 or more sensors are blocked.

You can close the holes with your palms (there are 3-4 of them at each end of the recess), if you have the patience to stand for 10-12 minutes. Or - seal them with thick electrical tape. This method is guaranteed to work on all CS models with a contactless keyboard.

Settings mode

All detailed programming instructions are provided in the documentation for the specific model. The latest KS intercom model 2006 has the most complete set of commands.

Entering the service mode is done by dialing the combination K-240361-call-0000-call. Here 0000 is the individual code of the installation wizard; you can enter the settings change mode only if the service company has not changed this set of numbers.

If you successfully enter the programming mode, the display will display a sentence like Here you can immediately unlock the lock by pressing 0 (leaves the intercom in programming mode) or 8 (unlocks the doors and exits the mode).

Mode 5 turns on or off the ability to open the door from the handset or use the apartment access code. To change the parameter:

1. press 5;
2. dial the apartment number;
3. press K;
4. enter 1 to enable opening by handset and code or 0 to block the option.

This section of the settings will be extremely useful if for some reason the service company has disabled the intercom for the subscriber. If the installers have not set individual access codes for the apartment, this can be done from the programming menu. To do this, press K-subscriber number-K-four-digit code-K.

An unpleasant feature of the KS series intercoms is the inability to enter new keys for an apartment into the device’s memory without a special master key, which only the service company has.

Therefore, if one of the contact tablets issued at the conclusion of the contract is lost, the easiest way would be to order a universal key, the production of which is offered by many workshops.

Codes

For CS intercoms, there are quite a few known combinations for opening the door. Depending on the modification, the following may be suitable:

• K-0000-98-K or K-000000-98-K;
• K-377-698-K;
• K-0903-98-K;
• K-240361-call-0000-call-8.

All changes to the main service codes, assignment of a master key and other operations for adjusting the zero security level cannot be carried out without opening the device and closing the contacts on the electronic board.

It is also impossible to reset the settings by applying voltage via the service bus (which will also require physical access to the intercom).

Universal key

As mentioned above, CS access systems offer high compatibility with equipment from various manufacturers. This applies not only to locks, but also to contact keys.

KS intercoms work with tablets from all four well-known manufacturers. Therefore, making a universal key for the entrance is not difficult. This service is offered by many companies and private workshops.

It works according to two main methods. The first uses factory codes, which are necessarily written by the manufacturer of the access control system into the device’s memory.

They are stable and depend on the model of the intercom system. Another technique is the use of area codes, if entrances are equipped centrally and companies prescribe digital sequences transmitted to firefighters, police, and doctors.

Such keys operate within a certain sector of the city, but are guaranteed to open doors.

Conclusion

A correctly installed KS intercom with reprogramming its individual code is almost impossible to open and reprogram without obtaining universal access.

However, the ability declared by the manufacturer to block the sensors and put the device into emergency mode gives a chance to get into the entrance quite easily. But, in order not to create difficulties, it is rational to order spare universal keys.

Video: How to open a KS intercom without a key

How to find out intercom codes by house address. We open any intercom without a key.

The intercom key can be:

- Factory. The code is assigned at the factory, we will consider such a device to be original.
- Clone. This is a copy of the key.
- Blank(blank). The key is empty and does not contain a code.

To make a key clone you need an empty blank. The secret combination is read from the original or another clone, and then multiplied into an empty blank. This method is always used to make spare or lost keys.

The flashing device itself is called a duplicator.

Key programming- entering a unique key number into the intercom database. When encoding a tablet, nothing is written into it, as many people mistakenly believe.

A blank (an empty key that does not contain a single code) cannot be programmed into the intercom!

You can register the key to your intercom in at least 100, at least 1000 compatible devices. Your code will simply be added to these new intercoms.

When you add your intercom key to your lover's intercom, no one will know anything. The only condition is device compatibility.

Determining intercom codes by house or address.

If you are trying to find out the intercom code for a house address, then you need to first find out which manufacturer protects the doors at the desired address. Ideally, you should also know the model, because the number of possible combinations will be significantly reduced and increase the chance of success.

There are a lot of equipment manufacturers and any of them can be installed on your home. There is little point in keeping statistics for each house, at least we have not yet come across such information.

For city residents, you can first determine the type of installed equipment using panoramas from Google and Yandex maps.

Intercom at the address of the desired house from Google maps.

Google displays the year of the photo in the lower right corner. Please take this into account, because the intercom may be replaced with another brand over time.

If the inscriptions are not readable, then you can try to identify the manufacturer by external distinctive features and shape.

The universal way to open any intercoms is to turn off the power.

Have you ever noticed that if the staircase inside the entrance is de-energized, the intercom almost always does not work.

To protect the intercom system from sudden shutdowns, uninterruptible power supplies (UPS) are installed. But since this increases the cost of the entire system and the cost of its maintenance (you need to monitor the battery and change it on time), service organizations simply do not do this.

Is there no light on at the entrance at night? Most likely, the intercom will also be de-energized at the same time.

During long outages, the UPS will be discharged and the magnetic lock of the front door will also be open.

We open any intercom without a key.

We recommend using this opening method only in extreme cases. A gap in the security system is the ability to open a magnetic lock without calling the subscriber's device, located, for example, in an apartment. To open the lock, you will need to short-circuit the two power wires going to the calling panel.

Famous manufacturers of intercom equipment recommend drilling out the slots of the fastening elements during installation and covering them with decorative plugs, which are included in the package. And if possible, mount the intercom panel on the reverse side, if the design allows for this.

To increase protection, some manufacturers additionally cover the electronics on the reverse side with a metal casing, which will require a security tool to remove. That is, even if an attacker manages to unscrew the call block, he will not gain access to the device.

In reality, everything may not be so, and in many ways this depends not even on the equipment, but on the conscientiousness of the installer.

Additional protection is more often used on expensive or multi-subscriber equipment (for MKD).

The figure shows that to remove protected equipment you will need a specific “secret” key with an axial offset.

Table of codes for intercoms of different models.

Error on the intercom screen and opening of the magnetic lock.

I managed to open the door of someone else's intercom with my key.

Intercom keys can be of different types and are incompatible with each other from different manufacturers. The reader should not react in any way to such keys.

I remember, a long time ago, I tried to jokingly open someone else's front door by using my tablet key. The intercom made a squeak, an error appeared on the screen: Error, and the magnetic lock opened for an instant. I quickly grabbed the handle and opened the door. He closed the door and tried to repeat the trick, but nothing worked. If you have many different keys, you can try.

Universal code for opening any intercom.

You will need a universal key. There is no Miracle Yudo key that will open any intercom! Even because the keys can be of different types and are incompatible with each other. Plus add competition among manufacturers, where can they all agree among themselves?

A universal key can be made only within one service company or within one small town or village.

We take one key and register it in all devices that we service. And don't forget about type compatibility!

Duplicates can be distributed to postmen, plumbers, housing office or homeowners association electricians.

How to open the Belsplat intercom without a key.

JSC "Belsplat" is a Belarusian manufacturer of intercoms, metal doors and products for ensuring the security of residential and industrial facilities.

belsplat management is looking for new markets for the sale of products and is negotiating to promote products on the international and Russian markets.

Opening the Belsplat intercom through program mode.

We are recruiting 2698 , input is confirmed * . The display will display " pass". Enter 123456 (factory code during installation), confirm with the * button. Next, dial service code 3 and an asterisk. We come up with and enter a new general code (4-6 characters) *.
The code has been replaced, exit # mode.

How to open the Berkut intercom.

Berkut intercoms are available in two modifications: KS and LS, which differ only in the appearance of the calling panel and the maximum number of possible subscribers.

Codes for opening Berkut are given in the general table.

How to open the Dacsys intercom without a key.

The Daxis intercom calling block is designed to connect the following devices to the central bank: Daxis, Marshal-Raikmann, Laskomex, Proel, Keyman Polylock.

Opening or hacking Dacsys intercom doors using administration mode.

There are two login options to access features:

1. Type *230911-“four-digit code” on the keyboard. If the input is successful, we see the following message on the screen: F-..., then enter the 2-digit function number “*”
2. Apply the master key, the inscription appears: F-..., then enter the 2-digit function number “*”
"four-digit code" - try standard codes 0000, 1234, 1111, 9999
function numbers:
01 - change the installer master code
90 - lock opening test
98 - open the intercom and exit administration

How to open the Dom.ru intercom, Beward without a key.

The company began to actively develop in 2001, during which time it managed to grow from a small fish into a huge whale, acquiring dozens of companies. Among the large ones is the St. Petersburg Internet provider Interzet (PERSPECTIVE LLC).

So in 2014, Dom.ru and Interzet merged.

Let's start with the fact that in 2018 Dom.ru (ER-Telecom Holding JSC) won the tender for the purchase and installation of intercoms under a government contract provided for by the city program of St. Petersburg "Safe City" (N58/18 dated 05/03/2018) in the amount of 548.4 million rubles. Now Dom.ru is required to install 8532 video intercoms within 3 years.

Rostelecom took part in the tender, but Dom.ru beat it during the bidding. The complex is aimed at identifying and preventing crime in the city. For installation, Smolny chose the most problematic areas of the city: Nevsky, Primorsky, Vyborgsky, Kolpinsky, Petrogradsky, Admiralteysky, Kalininsky, Moskovsky.

Download the full list of installation addresses:

To prevent government investments from being wasted money, Dom.ru purchased digital video intercoms from Beward, DKS15120 series. According to Yandex Market, the cost of one intercom at the end of 2018 ranges from 36,000-40,000 rubles.

Let's take a look at what this engineering marvel is.

The intercom panel, in order to accommodate all the goodies, has quite impressive dimensions: 260x150 mm. A blind person can easily find the call buttons and dial the desired apartment.

The intercom is equipped with a 1.3 MP 1280x960 video surveillance camera and a 1/3" Sony Exmor matrix, which is very good for pinhole lenses. Sony Exmor has a nighttime sensitivity of 0.003 lux. IR illumination up to 10 meters.

The stated horizontal viewing angle of the camera is more than 100. It’s no longer possible to sneak up unnoticed!

As with all intercoms, the panel has a built-in speaker and microphone.

From know-how: a button to contact emergency services has appeared on the call block.

All Dom.ru digital intercoms are united into a local network and connected to the Internet. The provider promises to distribute free Wi-Fi in local areas.

Modern IP intercom from Beward DKS series can be used as a full-fledged video surveillance camera. You can configure the broadcast of audio and video streams when dialing a subscriber, at the moment of motion detection (when the door is opened). Which, in fact, is what Dom.ru did. After all, this is what everything was started for! Recordings from all cameras are most likely archived and processed within the framework of the “Safe City” program.

Now imagine: if “Safe City” uses facial recognition software on all its installed intercoms, then it will immediately be possible to identify a person from a photograph or sketch. This seems to be good: you can search for and catch criminals! But on the other hand, this is an interference in people’s private lives, because there are no guarantees that this data will not fall into “dirty hands.”

Let's talk about how to open or hack the Dom.ru IP intercom.

The beward intercom used by Dom.ru is anti-vandal, in a metal case. If you try to steal it, the limit switch for opening the panel will work and the dispatcher will immediately receive an alarm message with the coordinates of the incident.

When connecting a new object to the intercom system, Dom.ru first assigns a common code combination for the entire entrance, house or even area. In this mode, the system operates for several months while residents receive or purchase additional electronic keys. Then the password is disabled, and login is possible only via wireless tags or using a mobile application.

To connect a mobile application to your intercom, a monthly subscription fee is charged. If connected, your entire family will be able to see the caller, even if you only have a handset in your apartment (without a screen).

You can also open the door to the entrance remotely via the Internet using a smartphone. Miracles, nothing less!

Wireless tags are supplied to an apartment at a rate of 2 pieces free of charge, for each additional one you will have to pay extra. At first it cost 150 rubles, now it costs 200 rubles.

Cost of use.

Dom.ru does not take money from residents for the intercom itself (because it is the city’s money), but will gladly top up your receipt with new subscription fees for service.

Management and integration of Beward DKS 15120 video intercom (Dom.ru) into an IP network.

The device is able to integrate with Sip devices from any manufacturer, which opens up enormous opportunities for the user: switching to PBX, IP telephony, Sip monitors, etc.

Since the video intercom is connected to the apartment, using Sip equipment you can test the reliability of the system and try to bypass it.

By default, the intercom has 3 built-in accounts:
- Administrator, login and password: “admin / admin” (Administrator is the main account without restrictions on access rights)
- User1, login and password: “user1 / user1”
- User2, login and password: “user2 / user2”

NOTE! Logins and passwords are case sensitive.

Open the intercom Impulse without a key.

Russian manufacturer "Proton-Impulse" from Orel. In 2018, it stopped producing intercoms under the Impulse TM. At least, we were not able to find modern intercoms from this JSC. The company is engaged in the development and production of electronic components for related industries, and has a workshop for the production of printed circuit boards and plastic injection.

At one time, Impulse intercoms established themselves as inexpensive and easy-to-use devices.

Even despite the overly complicated and inconvenient programming menu.

We open the intercom Impulse 40 D, DS, SD, S through the programming mode.

Press the call key "B". Enter 27521412, press "B" again, then 10"B"0"B", 11"B" 0 (zero) "B" 01 "B" "Come up with a new 4-digit opening code" "B" 000 "B" "C" "B" "B". We are waiting for the E symbol to appear on the display, when it flashes on the screen, press “C” 2 times.

Open the intercom Impulse. "B" "new invented code" "BB". “Open” will appear on the display and the intercom will open.

How to open the Keyman intercom.

Russian company has been producing equipment since 1996.

The modern line of Keyman digital intercoms is divided into two groups:

POLYLOCK
- POLYLOCK-PRO

They have differences in the form factors and working space of the typing keyboard.

Both series do not have mechanical components in the keyboard area. The calling panel itself is unique: an all-metal duralumin structure 10 mm thick with a touch keyboard.

Kaman provides one of the best offers in terms of durability and wear resistance of calling panels on the Russian market, stating that the design does not require maintenance throughout the entire service life of the equipment!

Access to programming mode: K-[...]-170862-|signal| "XXXX"
170862 - manufacturer's factory code
XXXX - code set by the installation organization
Once you have entered the codes correctly, the screen will display Programming Mode P.
Enter 0 - and the electric lock is open!

Keyman intercoms are a standard modern device with reliable software that cannot be opened or hacked without attracting attention.

The table shows a working universal opening code suitable for the entire line of Kaman intercoms.

We open the Kron intercom without using a key.

Sometimes you need to open the intercom using a magic code that only those living in a given entrance can know.

With Kron intercoms, everything is a little different, because the installer program, when setting up the device for the first time, requires changing the code 951 to any other.

The chances that the master installer will replace the code with the same one are small, but still possible. Try to open it.

Currently, more than 95 percent of entrances are equipped with a security system such as an intercom. This device exists in various variations, but all of them can be “hacked” culturally. So how can you open an intercom without a key?

It turns out that the intercom systems installed in our cities are as simple as the multiplication table. To be more precise, they are absolutely logical from a technical point of view. This can be judged by simply typing the treasured phrase in any Internet search engine: “How to open an intercom without a key.” We see that we are kindly offered almost a million answers to this question, due to which we get the feeling that at least half of the population of our country are either burglars or a little “engineers” at heart.

As you know, in order to set up an intercom, you need access to its programming mode. This is usually accomplished by typing a specific password into the device's keyboard. After the installer has entered the mode, he gets the opportunity not only to open the entrance door with an intercom, but also to change all the system settings to his taste without opening the door. It is this part of the intercom system, to which manufacturers paid special attention at one time, that, as they say, is lame on both legs. The reason for this is either a manufacturer’s mistake, or laziness and inattention of the installer. But the fact remains that the secret codes that allow you to enter the entrance without an intercom key have long ceased to be secret.

Below we will look at how you can open the most famous types of intercom systems without a key. So, after practical application of the trial and error method, we can safely say: “Open sesame!”

VIZIT: how to open an intercom without a key

These intercoms are considered the most difficult to open without a key, since the codes on them are incredibly diverse. If the installer has not changed the standard settings of the device, then the door should open after entering “12#345” or “*#4230”. Newly installed VIZIT can be opened with the code “67#890” or “*#423”. By the way, many models of such intercoms often lack the “asterisk” and “hash” symbols - their functions are replaced, respectively, by the “K” and “C” keys.

If the installer, when installing the intercom, changed its standard settings, then you will first have to go to the service menu (“#999”), wait until two short beeps sound, and then enter the default code (“1234”). You should now hear a short, single squeak. Now let's do the next few more complex operations. Let's dial “2”, pause, “hash”, pause, “3535” (the last code is a command to open the intercom without using a key).

Cyfral: how to open an intercom without a key

If in the desired entrance there are apartments with numbering that is a multiple of 100 (that is, 100, 200, etc.), then enter the combination: “call, code 1, call, code 2.” Code 1 is the apartment number, which is a multiple of 100, and code 2 is “7272”, “2323” or “7273”.

For Cyfral models with the letter “M”, try the combination: “call, 41” or “call, 1410”. Another door can be opened by simply entering “07054”.

How to open without a key

Eltis is much easier to open. For a “neat” hack, dial the combination: “call, 100, call, 7273” or “call, 100, call, 2323”. Everything should work out.

Opening the METAKOM intercom

We dial the combination: “call, number of the first apartment in this entrance, call.” When you see “COD” on the display, enter “5702.” If all else fails, you can take a different path by dialing the combination: “65535, call, 1234, call, 8, call, 6, call, 4568.”

Rainmann: how to open an intercom without a key

On the numeric keypad, press the "key" and enter "987654". If the reaction to your action was a double squeak, then enter “123456”. The letter “P” should appear on the display, which means that you are in the service menu. To open the door, simply press "8".

When opening doors with an intercom without a key, you should distinguish between an urgent need and a banal and criminal burglary for selfish purposes. Therefore, be prudent and use the acquired knowledge wisely.

Quite often a problem occurs when the keys to the intercom are lost or forgotten, however, there is a way out, this is to enter a special code that was set by the manufacturer of this intercom device. All the details are below.

An intercom kit is necessary to ensure security in the entrance of an apartment building, since criminals usually wait for the victim in open, unprotected entrances to get into the apartment. The intercom also ensures order and cleanliness in the entrance, as it scares away lumpen and marginalized people.

You need to know that entering a special PIN code with mercenary intentions is punishable by law.

Modern intercoms not only have the ability to communicate and record conversations, but also video surveillance, which provides 100% security. Many intercoms are equipped with a special code so that you can open (if you forgot or lost the key) in emergency situations (unlocking), as well as a loud emergency notification system when evacuating people from a building during a fire, earthquake and other situations.

When using the intercom, you should adhere to the following instructions:

1. When leaving the entrance, you need to press the button under the screen and wait for the sound signal, only then exit.
2. When entering the entrance, you need to lean the key-chip against the reading panel of the intercom device, when the sound signal (pulse) sounds, you can unlock the front door.
3. After leaving or entering the entrance, you cannot help the door close; it will close itself using a hydraulic closer.
4. If you push and help the door to close, this can lead to damage to the closer.

The main components of the intercom are: a company name plate, a call unit, a primary power source, an independent switching unit, an independent electromagnetic lock that magnetizes the magnet to the door plate, a door closer, a call button, apartment units, and a keyboard.

Intercoms are divided into multi-subscriber and small-subscriber, according to the technical device, into multi-wire and two-wire. In the age of new technologies, there are intercoms that receive and transmit signals using Wi-Fi, based on optical fiber.

Don’t panic if you don’t have the keys to the intercom with you, or it has become demagnetized or the encoding has been lost (recoding and programming is required). You can deceive any intercom using a universal key chip, which is available to emergency doctors, police, post office workers (postmen), house management workers, and Internet communications (Rostelecom). These keys are made in the form of a special tablet, radio key fob, two-pin key and are issued legally to employees of special services.

Description of the method: how to open the Metakom intercom

The domestically produced Metakom intercom is used for apartment buildings to protect against unwanted guests. What should I do to open the intercom? Is this even possible?

The main thing is not to break the screen, but to make (restore) the lock by entering a combination.

To open a Metacom intercom without a screen, you need to dial a special combination consisting of several numbers and letters. Firstly, press the button corresponding to the apartment number - B. Secondly, dial code 5702.

If the intercom does not open, you can try entering the codes:

• 64434;
• 1256;
• 1256;
• 4978.

If the Metacon intercom series MK-20M/T, forward or Pro, then you must enter similar combinations or PIN code (B + 27, B + 5702). It takes a very long time to go through all the codes and you can either wait until someone comes in or out of the entrance, or call the neighboring apartment and say that you are a neighbor and forgot the keys. And remember that the use of all frauds with mercenary or predatory intentions is prosecuted by law.

Example: how to open an intercom Visit

The Visit intercom is one of the most reliable devices and is adapted to such harsh conditions as low and high temperatures, wind, rain. The intercom body has an anti-corrosion coating, which ensures reliability.

An intercom of this model works in humid climates. The average service life is about 10 years.

Intercom Visit in case of emergency can be opened with a special code; you should log in to its menu and dial #999. After 2 signals sound, enter 1234. You need to wait a little and after a short signal, dial 2#3535.

If, after entering combination 1234, there was no short signal, but a signal similar to a two-tone or others was heard, then you can enter other combinations:

• 6767;
• 3535;
• 12345;
• 11639.

After dialing the combination, you must enter 2#3535. Relevant for the following models: Vizit N-100, Vizit SM-100, Vizit BVD-341, Vizit BVD -313 and others.

How to open the Cyfral intercom

Digital has many models: Digital INTEL, Digital CCD-20.40, Digital CCD-40TS, Digital CCD-2087.2TV, Digital CCD-2087.2T, Digital CCD-2087.2T R, Digital M-10MR, Digital M-10MT, Digital M-20MTV, Digital M-20MZV.

For a regular model Cyfral intercom, to open it without a key, you must enter the following numbering:

• Call + 100 + 2323;
• Call + 200 + 2323;
• Call + 300 + 2323;
• Call + 400 + 2323;
• Call + 500 + 2323;
• Call + 600 + 2323;
• Call + 700 + 2323;
• Call + 800 + 2323;
• Call + 900 + 2323;
• Or choose the following combination Call + number + 2323 or 7272, 7273.

It takes time to find the code; it’s better to call your roommate. For the Cyfral M intercom, it is easy to open using the combination Call + 37 or Call + 3792. The Cyfral intercom of the CCD-2094.1M series is opened using the code Call + 0000, after which the message ON will appear on the display, you must enter 2.

If these operations do not work, then the factory access code was changed by housing and communal services employees.

If you are with a tenant of this house, you can ask them for the access code if the key has been lost. The intercom model Cyfral CCD-2094M can be opened by dialing the combination 0000 + call, after entering the code will appear on the display. 123456 + call, if it does not work, enter 456999 + call, or 123400 + call, after which f0 appears on the intercom display, then enter 601.

Hacking the intercom model Rainmann (Rainmann) 2000 is possible by entering the combination - key + 987654, after the double beep of the intercom, enter 123456, after which P will appear on the display. The letter P on the display monitor indicates that you have entered the service menu, in which you can control using numbers and program the code yourself.

A single number is entered:

• 4 – block and disable the Rainmann intercom;
• 6 – turn off Rainmann;
• 8 – open (the door is demagnetized).

The intercom of any DomoGuard model can be opened by entering the combination C + 669900 + call + enter a number that is 1 unit greater than the number of the last apartment in the entrance. After entering the combinations, F will appear on the intercom display, which will mean exit to the service menu. After this, dial code 080 to enter a new key 2, 2, 2 into the intercom memory. To disable the door lock - 071.

Instructions: how to open the Eltis intercom

All Eltis intercom models open after entering a special combination, however, if the entered combination does not open the door, then the factory settings have been changed. The Eltis intercom can be opened by entering a universal code that can be used to deceive the security device.

• Call + 973;
• Call + 7456;
• Call + 2323.

Using the same combinations, in which the call button is pressed at the beginning, you can open the following types (access intercoms) - Tehkom, Stroymaster, Marshal, Belsplat, Kamsan, Condor, Lock, Poly, Filman, Polylock, Smartel, Laskomex, Modus, Polis and others.

Intercom code

The Factorial brand intercom of different models can be opened without a key by entering a special software access code - 000000 + 123456, 5 + 3453475 + call + 7 + call.

The Keyman intercom can be opened by entering – K + 100 + 789, after the signal has sounded, enter 123456. After the Keyman P is displayed on the display, which allows you to enter the menu, enter 8. If the intercom has a touch screen, then in winter you can open it by Applying a lump of snow to the screen, hypothermia can damage the intercom.

It is also possible to open the device using the piezoelectric element of the lighter, which is applied to the key space, but this does not always work and is weak.

Intercom Barrier II, 2M and 4 can be opened by pressing 2 + 4 or 2 + 7. You can also magnetize the place where the key is applied and magnetized using a magnet. In the same way, you can open the Arcades intercom with an empty plastic key.

The Raikmann and Rainmann and Smartel intercom can be opened as follows:

• Key + 321654;
• After the beep, enter the numbers 123456;
• When P appears on the display, enter 8 or recode with a shocker or stun gun, which with its impulse can turn off the intercom device.

Blink intercom is the only audio intercom installed in Belarus, Ukraine, Kazakhstan and you can open it using a D9-0.1, 6F22 battery, which we put in the key slot. And the intercom Kron, Pierrs and Safe can be opened using the factory combination 951. The intercom Pier 1000 Micro can be opened using the factory access code - 12345678 + K + 1234 or 8310649 + entrance number.

You should know: how to find out the code from the intercom

An intercom is the most reliable device for protecting multi-storey buildings, garages and private houses. Residents of the building or the owner of the garage must know the password and secret codes for emergency opening of the intercom. This password is used if the intercom key has been lost or forgotten.

If the key to the intercom is lost and the password has been forgotten, it is not possible to open the door, then you need to call the housing and communal services, service or company, the single service center that installed this intercom device, using the telephone, so that the technician can unlock the combination locks. Remember that unauthorized entry and hacking of the intercom in the entrance of a house on someone else's territory is responsible for your actions.

Why shouldn't you enter codes and physically try to open the intercom without a key? There is an instruction that states that during the operation of the intercom, it is strictly prohibited to cause any mechanical damage to the call unit, handset, electronics unit, electromagnetic lock, opening button and intercom body with various objects that can lead to breakdown of the device or its individual elements.

Mechanical damage also includes wiping with snow, dousing with water, heating with fire, dousing with paint and other solutions, using a magnetic key using an electromagnet, tearing out buttons, repairing the device yourself or encoding it.

It is prohibited to independently perform recoding, unlocking or other actions by a person who is not a service worker for the intercom device. Do not pull the door behind you, which can lead to damage to the hydraulic closer. The closing speed of the entrance door is set by the master, depending on the structural features of the door and the adjusting screws.

How to open an intercom without a key (video)

In conclusion, it is worth noting that it is prohibited to place foreign objects under the door from the inside or outside that would interfere with the door closing independently and lead to unauthorized entry of strangers into the territory.

This article will tell you how to open the Visit intercom. Let us remind you that these devices are considered the most reliable! They have prevented many thefts and break-ins, which is why they are installed in most multi-storey buildings.

Vizit equipment is fully adapted for use even in the harshest conditions. Its body has a specialized anti-corrosion coating.

It is known that Vizit intercoms can operate in a wide temperature range, which begins with 30 degrees below zero and ends with 40 degrees of heat. In addition, they are resistant to high humidity and are reliable and durable devices. This equipment can operate for more than 10 years, which is quite enough to classify it as a stable device.

Main features of intercom devices

Nothing is impossible for the Visit intercom: this device is suitable for different occasions. Manufacturers offer both low-subscription and multi-subscription models. The latter are designed to connect about 200 subscribers, while the former are intended for private use, for example, for the protection of summer cottages and mansions.

Users can choose equipment that has video surveillance functionality. It can control the territory even at night.

Anyone can open these devices without a key if they forgot the chip at home or at work, but to do this they need to learn specialized passwords. We recommend this video on how to open a Vizit intercom without a key, in it you will find step-by-step instructions and codes:

Method 1: Basic access passwords?

All intercom models have standard firmware. During their installation, specialists use specialized codes.

It is known that all Vizit intercom codes are valid only until they are replaced. Passwords are changed after setting up all the necessary functions, when the equipment is completely ready for use.

To open an intercom or video intercom, you must select a certain digital combination, for example, *#4230 or *#423 12#345.

It happens that there are no * and # on the panel, then to open the Vizit intercom, you need to use the C and K buttons.

For new intercoms, such as Vizit Comfort or more modern models, you can use the combination *#423 or 67#890.

Method 2: using the service menu?

• Sometimes, to enter the entrance, you need to dial a code to open the service menu, with which you can hack the device. To do this, you need to dial #999, then enter the service mode, wait for a couple of beeps and enter a specialized password, by default it is 1234.
• As soon as this code is entered, the device should beep once. If the password was incorrect, then the signal will be two-tone. In this case, you can try other standard variations of codes - 6767, 0000, 9999, 3535 or 11639.
• When you manage to enter service mode, you need to perform more complex operations. The combination 2-pause-#-3535 will allow you to open the door if you have forgotten the key to the intercom.
• By clicking on 3, you can configure the keys for the intercom device. After pressing this button, you need to attach your key to the reader, then hold down # until a squeak is heard. All is ready. Button 4 can erase all chips from memory. The asterisk is the exit button, and the hash mark is used to confirm changes have been made.

Intercom models that do not have a display or LEDs are a little more difficult to open, so it is better to use a universal key for them. If there is no such key, then you need to go to the service menu and press 1. However, you should remember that this does not always help.

What operating modes are there?

The developers provided several operating modes, among which are:

• Ordinary;
• Settings;
• Service;
• Programming.

To start the maintenance mode, the specialist will have to change the position of the jumpers located on the internal board of the device. Access to it is limited to qualified personnel only.

This precaution is mandatory, because in this mode you can change any code, even special ones.

The photo shows a universal chip

Method 3: Change your individual password

• If you need to change the individual code of an apartment or turn it off, then you can do this without even entering the service mode. This requires two people: one must enter the above-mentioned combination of numbers on the calling panel, while the second must pick up the handset and hold it for five seconds, and then press the unlock key six times.
• After the key is pressed for the last time, the indicator on the calling panel will light up, indicating that you can dial the apartment number.
• Users can then enter new codes. Upon completion, you must save the entered information. To do this, you need to press the door open button on the handset again. At the same time, the calling panel will beep, indicating that all passwords have been successfully saved.

The developers of the device foresaw a situation where a person would have to get inside the entrance without a key, so they made the equipment as convenient as possible. Standard access codes can only be changed by professionals, while users only have access to some of their adjustments.

To get home, you can also use, which can be bought for a symbolic price in special companies.

The video shows how to open the Visit intercom without a master key: