How is efficiency indicated in wot. What is efficiency in World of Tanks? How to find out a player's efficiency in World of Tanks

How is efficiency indicated in wot.  What is efficiency in World of Tanks?  How to find out a player's efficiency in World of Tanks
How is efficiency indicated in wot. What is efficiency in World of Tanks? How to find out a player's efficiency in World of Tanks

To begin with, we note that the efficiency rating, like any statistical characteristic, becomes reliable with a sufficiently large sample. This means that for a World of tanks player who has fought less than 1000 battles, the effectiveness rating does not reflect the player’s abilities reliably, because big random errors. And the RE of a player with 5000 or more battles is pretty true.

What affects the performance rating in WoT

The damage rating is most affected by the damage dealt. In addition, on efficiency rating in WoT influence the number of victories and destroyed equipment, the initial exposure of enemy equipment, the defense of one’s own and the capture of an enemy base. Thus, in order to increase the efficiency rating, you need to deal a lot of damage and. What level of equipment is best to do this with?

Which tank to play on to increase your efficiency rating in WoT

Does the level of the technique you play take into account when calculating efficiency rating? After all, on tanks of the sixth level, it is almost impossible to deal as much damage as on vehicles of the tenth level. The level of tanks is taken into account when calculating the efficiency rating. Moreover, many top players and platoons play on 10s, so it will be very difficult to achieve an efficiency rating on top vehicles.

In order to understand which tanks to raise efficiency rating in WoT you need to look at your statistics and choose the vehicle with which you deal the most damage, while winning more than 50% of battles.

How do you take level into account when calculating damage? Pay attention to this indicator in the official statistics of World of tanks: Damage coefficient- this is the ratio of damage dealt to damage received, and the damage received depends on the level at which you play (the higher the level, the greater the health reserve and the more damage you can theoretically receive). For getting good results The damage coefficient must be higher than one, the higher the better.

With loved ones statistical indicators in World of tanks choose a vehicle whose level is lower, but do not use tanks below level four.

Finish off or deal damage in World of tanks

In most cases, it is better to finish off the tank, because... Thus, you deprive the enemy team of one player, he will not cause damage, will not transmit intelligence, which means you will increase the probability of victory, which also affects RE in WoT. This does not mean that you should strive to take away frags, and specifically wait for the moment to finish off your opponent’s tank, we're talking about about a situation where you cause damage in normal mode and you have a choice whether to deprive the enemy team of the gun or not. Destroy an opponent in World of tanks in this case it is a good choice.

What tanks are needed to increase the efficiency rating?

As noted earlier, to improve your efficiency rating you need to deal a lot of damage. Tank destroyers, such as Soviet ones, are excellent for this purpose. ISU-152 and Object 704, German Rhm.-Borsing. An ISU with BL-10 in World of tnaks is capable of 700 damage in one shot, five hits and that’s 3500 damage, which is good for the eighth level.

If you are willing to spend serious money (silver or gold) to win, then you can play on vehicles with high explosives and cumulative shells, which cause huge damage for their level and have good armor penetration. This way you can increase your efficiency rating in World of tanks on Sherman, SU-152, KV-1S, KV-1.

To improve your efficiency rating, you need to show the maximum result in each battle, which means it’s worth spending money on good equipment and equipment for your tank. remember, that The more fights you have, the more difficult it will be to correct the statistics, including RE, so try to play well in every battle, and fight to the last in any situation.

The popular “tank shooter” game, which has been attracting millions of players around the world for several years, provides an opportunity for each user to express themselves on the virtual battlefield. Some show outstanding gaming results, while others show significantly more modest results, but the very principle of the game inevitably forces participants to compare statistical figures with each other.

What is efficiency in "World of Tanks"?

Let’s face it, in relation to World of Tanks, a player’s efficiency is a kind of summary indicator of “usefulness” in each specific battle. This is a set of characteristics that quite clearly reflect how effectively the user damages or destroys enemy equipment, scouts enemy positions, and captures someone else’s (or defends his own) base.

Efficiency rating systems

In the last few months, the developers have introduced a system of personal ratings, the use of which is trying to reorient the gaming community. It must be said that this innovation does not arouse much interest among players due to the opacity and vagueness of the counting system (game developers traditionally hide such nuances from users).

The rating system, which is as necessary as air, was introduced a long time ago by fans of the game on third-party Internet resources. Also, new systems for recording indicators appear periodically. On this moment The most popular resources are: WN5, WN6, WN7, “Bronesite”, wot-noobs.

It’s worth mentioning separately about the wot-news portal. This platform is the most “promoted”, it appeared one of the very first and is a generally recognized leader in player evaluation, on which you can check the efficiency of “World of Tanks”. Suffice it to say that the “Efficiency Rating” provided by this resource is used as the same efficiency factor in all modifications of the game client without exception that affect aspects of the statistics of each specific player (programs called “Deer Measuring”).

Who needs it, your efficiency?

The question “what is efficiency in World of Tanks” is asked once by each of the game participants, and the answer to it is, in essence, simple:

1) Efficiency is needed in order to be able to please the player’s vanity - it’s so nice to realize that your barrel is longer and has a larger caliber than that of your neighbor/classmate/boss. You can see what to strive for, what gaming goals to set for yourself.

2) KPI is needed by the clan leadership to assess the potential of a possible recruit. Naturally, this is not the only criterion by which an opinion is formed about a candidate to join the ranks of the team, but it is in many ways a priority. Suffice it to say that advertisements for clan recruitment must indicate the lower limit of this indicator.

Pros and cons of payment systems

Each of the above systems has both its pros and cons.

TO positive aspects, without a doubt, it can be attributed to the fact that all players are compared according to the same criteria, which allows us to talk about a certain objectivity. Also, on any of the portals, the formulas by which the assessment is made are described in detail, and you can find out the efficiency of “World of Tanks”, so that each of those who visit can easily understand all the nuances of the game.

Negative aspects, in turn, may be the formulas themselves. Or rather, the balance weight of certain indicators used in these calculations. Whatever one may say, the degree of their influence on the final result is assessed by the compilers independently and is a subjective opinion. It can also be noted that players have long learned to “increase” their indicators in one system or another to certain values ​​(by focusing in battles on one or another action that has a high “balance weight in the formula”), often to the detriment of others.

We evaluate the efficiency ourselves

Having abandoned all the proposed calculation options, you can personally try to answer the question of what efficiency is in “World of Tanks” and get an impression of the player’s usefulness in battles on our own- believe me, it is no less interesting!

For such a procedure, we will need statistical information generated within the game itself and available on each player’s page.

The first indicator we pay attention to is the number of battles conducted. If the account has less than 4.5-5 thousand battles, then it is premature to give any assessments: by this time the player has not even really understood the in-game mechanics, has not studied the battle maps, or learned how to use certain types of tanks in the right way. And he had very few tanks - only by the fifth thousand battles would he reach the crown of one of the development branches, having received the first top-level tank. True, this does not apply to second accounts that experienced players create to increase their statistics.

The second important indicator is the winning percentage. Empirically, it has been found that the average statistical indicator for an avid gambler is about 49%. Accordingly, if our “experimental subject” is the proud owner of the figure of 44%, then we can safely conclude that he is (possibly temporarily) unsuitable for the job. It is important to note here: if a person has 20-30 thousand fights and the rate is 43%, then it is already hopeless. If the number is above 50%, this is a reason to take a closer look at the player, according to the principle “the higher the number, the more carefully we analyze.”

The following figures are important to understand and must be considered in their entirety. The standard game statistics window for a combat participant allows us to identify his preferences in tactics, and we use this to draw conclusions. For example, the character in question spends a large number of fights on heavy tanks Levels 8-10 from the Soviet and German development lines. According to the realities of the game, these tanks are heavily armored, well-armed, but not very mobile monsters, which inevitably affects their use in battle. These are breakthrough tanks, equipment engaged in “pushing through” enemy defenses, first-line tanks. If a player on this vehicle has a large amount of damage inflicted (on average, it should be one and a half times more than the strength points on the tank itself), as well as a considerable number of “profile” game medals (these include “Steel Wall”, “Spartan” ", "Armor-Piercer", "Warrior" and some others), then we can make an unambiguous conclusion that the person is using his tank correctly. At the same time, if the average damage inflicted on such a tank is low, but there is a huge amount of destroyed equipment, this means that in battle it ignores its direct responsibilities and is engaged in shooting “runaways”.

In a situation with light tank everything is different: the task of this technology is reconnaissance. Here information about the number of detected equipment will help us for analysis, as well as average experience on a tank (since its calculation uses an indicator such as “damage based on intelligence data”) and medals such as “Reconnaissance”, “Patrol”, etc. You can look at the efficiency of “World of Tanks”, but expect a lot from this type of equipment damage is meaningless, since the caliber and damage of the guns do not provide for such a method of play.

An important indicator is shooting accuracy, but here it is also necessary to take into account the nuances. For example, a professional artilleryman will never achieve high values, since the dispersion of guns and the constant dynamics of tank movement in battle do not contribute to direct hits. For artillery, average damage is important. At the same time, if a player prefers to use medium tanks from the German development branch, then this indicator simply must be high, which is explained by the good accuracy and rate of fire of the guns. Well, and, accordingly, the “Sniper”, “Shooter”, “Sniper Tankman” and others medals will help you.

To summarize

There can be a lot of ways to analyze a player’s “usefulness,” and it’s almost impossible to mention them all. None of them is ideal, but at the same time, each allows you to form one or another impression about the player and what efficiency is in World of Tanks. There are no universal recipes, and anyone who is interested in this aspect of analysis can choose something that is most suitable for themselves. As well as coming up with his own rating system that suits him personally.

Go for it! Good luck on the battlefields.

The main indicator of a gamer's gaming skill is efficiency. In many games, this is the ratio of his kills and assists in kills to deaths and is calculated using the formula (K+A)/D. In the world of tanks, things are a little different. To see efficiency player world of tanks, you can use an efficiency calculator, of which there are plenty on the Internet. Formally, this is a set of data that shows a player’s effectiveness in battle; in this way the player is evaluated before accepting him into the clan. This is an excellent alternative to a simple win rate because... Some games are lost not due to the player's fault, but simply because of the team's clumsiness.

In the world of tanks there are 2 types of efficiency

Combat. Shown in battle.

Hangar room. Compares a player's stats to the world average. This works for an individual tank without affecting the overall account performance.

In order to see the efficiency of a world of tanks player who was included in the team, just look at the color of the player’s nickname

Red are the players who are at the bottom of the gaming hierarchy. Beginners who don’t know how to play and just crooked tankers. general Statistics the account has up to 48%, and the efficiency is 0-629.

Orange - Players usually have an understanding of the basics of the game and are more or less useful to their team. Most often they come under criticism due to wrong decisions on the battlefield, for example, merging due to their stupidity. The top department of the World of Tanks characterize them as follows: “he drove out, fired once or twice, merged, chose another tank and went to the next battle.” The winning percentage of such players is 47-48%, and the efficiency is 630-859.

Yellow - Gamers who already have an understanding of various aspects of the game and can finish the fight with decent stats. Players in this category represent the bulk of the game. The winning percentage is between 49-51%, and the efficiency is between 860-1139.

After the bigots, there are usually players for whom efficiency matters and they try to maintain it at a decent level.

Green – players who feel quite good in battle and show good statistics from battle to battle. Any self-respecting clan will not accept players below the “green” level. Sometimes a platoon of 3 such players are able to turn the entire course of a battle and win, thanks to cooperation and right decisions during critical situations. The winning percentage is 52-56%, and the efficiency is 1140-1459.

Turquoise is practically the elite in the world of tanks. One such player is capable of snatching victory with his teeth. Game skills are in their blood, and the tank has long been their home. The winning percentage is 57-64%, and the efficiency is 1460-1734.

Purple is the top of the hierarchy. The most dangerous opponents you can see in battle. For the most part, these are people who have honed their gaming skills and then created a new account in order to rise to the very top from scratch. There are also those who, on their own, were able to improve their characteristics and become practically invincible.

They are able to adapt to any situation that may occur on the battlefield. Very often these players play on vehicles that can do incredible things while driving them. Win percentage is 65%+, and efficiency is 1735+.

This information is quite enough to understand which players you can meet on the virtual battlefield and prepare for confrontation.

Efficiency - coefficient useful action. In World of Tanks, it denotes a player's performance indicator. That is, than better person plays, the more experience he receives from each battle and the greater his efficiency.

Players with a high efficiency rate are highly valued in the game; many fear them like fire, because in the right hands a tank can destroy half a team of enemies. What if you, too, are a formidable force for your opponents, but have no idea how to find out your efficiency?

How is efficiency calculated?

First, let's look at how the performance rating is calculated. We are not talking about the performance rating in the “Achievements” tab in the game client and on the official website. This is also efficiency, but its calculation formula is different. It is less often taken into account.

  1. Number of enemies destroyed (frags);
  2. Damage dealt to enemies;
  3. Detected enemies;
  4. Allied damage to enemies you detect;
  5. Points for capturing an enemy base;
  6. Points for shooting down the capture of an allied base;
  7. State of the art.

The level of equipment has a strong influence, because in one battle on a Tier X tank you can deal as much damage as a Tier I tank would do in 50 battles. And since damage and frags are the most important factors in calculating the effectiveness rating, improving statistics and especially the level of play is easier on tanks high levels(although there are more inexperienced players in the sandbox).

How to check efficiency using websites

There are many sites where you can find out the efficiency in World of Tanks. For example:

  • Wot-news.com. The most famous website for calculating performance ratings. It has been working for quite a long time, so it has gained popularity and trust from players. To find out the efficiency, you need to enter your nickname and click “Load data”.
  • Wot-game.com. The site is also popular and also has its own system for calculating performance ratings. On it you also need to enter your nickname and click on the “Define” button. The performance rating will be at the bottom of the table under the win percentage.
  • Wot-noobs.ru. The site is known for its "NuboRating", a signature (signature image on forums) that is updated for each player. On it you can see the main characteristics of the calculation, including the efficiency, which were mentioned above.

How to find out the efficiency in tanks, which is considered standard among players? This is RE - performance rating (again, do not confuse it with the one in “Achievements”). It is shown on other sites and in the XVM mod (although there you can choose which rating to display).

Mod XVM

At the time of writing this article, the XVM mod was used by more than 1.8 million users. This mod is primarily known for displaying the overall efficiency of tanks and statistics for each piece of equipment. In addition, it displays statistics for other players and makes the game much easier thanks to its excellent mini-map modification.

How to check efficiency using the XVM mod? First you need to download and install it, and then log in to the site and activate statistics. Instructions and other information on the mod are located on the official website or in mod assemblies.

It is noteworthy that each player can customize the mod at their own discretion. For this purpose, an online program was developed on the same website.

How to determine efficiency in World of Tanks by color

To find out your efficiency in World of Tanks by color, you need to look at this image:

In this table, efficiency indicators from lowest to highest are displayed from top to bottom, that is, the lowest indicator is at the top, the highest is at the bottom. Here is a brief definition of players by their efficiency colors:

  • red - bad player;
  • orange - below average player;
  • yellow - average player;
  • green - good player;
  • blue is a great player;
  • purple is an incredible player.

How to find out the efficiency in WoT on the above sites? Look at the color of the performance rating indicator. In a client with the XVM mod installed, the percentage of wins and efficiency are also colored in different colors.


Efficiency in World of Tanks- this is the player’s efficiency coefficient, the benefit that you brought to the team during the battle. The calculation of efficiency includes damage inflicted, killed equipment, flares, and assistance to the team.

How to increase efficiency in World of Tanks?
In this article we will talk about tactics, choice of equipment and much more. small details, which are simply unknown to beginners. First, let's look at which tank is better to choose to increase efficiency and win percentage in the game. We advise you to look in the achievements on which tank you had the most battles with, the most victories, and damage. To see more detailed statistics you will need the Deer Measuring Mod for World of Tanks. See also the average damage and efficiency in general. Based on these statistics, choose the tank you play best on. If you have few fights on your account, the statistics rise faster and easier. For example, if it is less than 5000, the statistics grow by leaps and bounds. It is very quick and easy to understand the win rate and efficiency ratio (Efficiency Ratio) provided that you play well and are in a platoon with elite tanks. But with the same success bad game it can fall quickly. But if you have 15,000 battles or more, the statistics rise very slowly. You will have to fight a lot and always try to play well. Of course, it will rise over time. Many players who initially played for fun are now thinking about increasing their statistics. They create new accounts, so-called twinks. They invest real money in the game, transfer experience and play for statistics. Thanks to experience, they create an account with excellent statistics from scratch.

Some players increase their win rate in companies. But due to this, the damage on the tank and the efficiency in general are greatly reduced. Which is not good for everyone. For newcomers, it will be comfortable in the company, there will be an opportunity to study tactics and try company gameplay. He's completely different there. This is a separate topic. It is possible to fall into a bad company of newcomers and waste not only damage, but also your win percentage. Be careful with your choice. If you have a good commander, but in random games you can’t increase your win percentage, then we recommend playing in a company.

Does it affect weak computer and low fps for the game?
If FPS is less than 20 in such conditions it is very difficult to drag, it is almost impossible to play. You should set the graphics to minimum; we recommend installing the WoT Tweaker program as well and removing all effects in the game. This will definitely increase your FPS. You can set compressed textures, for example, to 25%, the highest compression is up to 3% of the original size. The game then loses beautiful picture, but it becomes comfortable to play. We recommend turning off effects in sniper mode, track tracks, etc. in the graphics settings. This makes it seriously buggy. To see opponents even from afar, set the rendering distance to maximum. Try to keep the game FPS at 50 or more. The lower the FPS, the worse your effectiveness in battle.

To increase the percentage of victories, some players create a platoon of experienced tankers to play at levels 1-2 of tanks. Such platoons most often fall on newcomers. Having a pumped-up crew, modules and everything you need, you can easily increase efficiency and statistics. But not everyone will like this. If you are not a very experienced player, you may well try this option. Get a good win rate per session. But you shouldn’t play too much in the “sandbox”, otherwise you will get the nickname “pedobear” and such statistics will not be impressive, but will only look bad. If you are already an experienced player, choose tank levels 7,8,9,10.

Another tip is to always play to your maximum. Even if you don’t like the team or the map, don’t give up and try to make more money, survive in battle, and bring more benefit to the team. In general, play as best as possible.

Many players try to quickly complete the tank, upgrade to the next level, play a lot of battles, but the quality of the battles is poor. Because of this, efficiency drops and the winning percentage is not high. Remember, in World of Tanks it is not the quantity of battles that matters, but their quality! You should play when you are in the mood and desire, and not when you need to quickly pump up a tank or shoot down stars, but you don’t want that at all. If you play without desire and enthusiasm, then most likely your statistics are unlikely to grow. You need to play when you want, play on the technique you like, with the equipment and consumables. This is how it is achieved maximum efficiency in battle. Take the same people into your platoon.

Another important point. You shouldn't have too many fights a day because you'll get tired and your effectiveness will decrease.

Using shells for gold to increasing efficiency. How effective are they?
On certain vehicles, you can get very good damage using gold shells. Of course, this is expensive and everyone decides for themselves whether it is necessary. You can alternate BB with Cumulatives and act on combat setups. Let's say you play on Isu - you can shoot only AP shells on it, play calmly and not worry. On it, gold shells are not particularly needed, but when you get to level 10 they can be used. We recommend taking gold shells to any tank so that difficult situation you were able to penetrate less armored targets. If you are more likely to penetrate the target, you can use regular projectiles. But if the chance of penetration is less than 70%, then it is worth loading a gold shell. Classic example excellent Soviet IS6 tank, it is a farmer and many people use it to earn credits. IS6 is great for increasing efficiency and win percentage.