How to glue wallpaper in corners - the secret to perfect gluing. How to glue wallpaper in corners if they are uneven How to glue wallpaper to an outer corner

23.11.2019

Wallpapering walls is a job that does not cause any particular difficulties. Such repairs have long become commonplace for many owners of houses and apartments. The most important thing is to glue the first strip of canvas correctly and evenly, and then stripe to stripe and the wall is ready. Difficulties during repairs arise only when gluing corners. Let's talk about the rules and features of gluing non-woven wallpaper in problem areas.

Types of corners in an apartment and house

Before, you need to explore the room. There are two types of angles, each of which requires individual approach when facing interior spaces:

1. Internal. There are such corners in every room; it is with them that you usually have to work when decorating interior spaces.
2. External. Most often they are found in corridors, and sometimes in living areas of houses and apartments. If there is a similar corner in the room, it may cause greatest number difficulties.

Once the room has been examined, you can begin preparing for the renovation. In this article we will look at wallpapering non-woven fabrics. Currently, they are the most popular finishing material for interior walls. Non-woven wallpaper is a paper lining that contains non-woven material that strengthens paper base, making the finish more reliable, attractive and durable.

There are also vinyl facing materials on a non-woven base. They are more resistant to external negative impacts, they can be used in rooms characterized by high humidity. Meter and regular vinyl wallpaper on a non-woven basis are glued in the corners according to the same pattern, so the instructions below are suitable for different options finishing.

Special attention When preparing for interior cladding, attention must be paid to the choice of adhesive. Often they use universal glue, which is suitable for all types of surfaces to be treated and for various wallpapers. But professionals recommend using adhesives specially designed for this purpose for non-woven wallpaper. The following brands of glue are well suited for non-woven fabrics:

Quelyd;
KLEO Line Optima;
Emcol Universal;
Metylan Non-woven fabric.

For repairs you will also need rollers. It is best to purchase several rollers in advance: for applying glue to the wall, for smoothing the finish on the surface, and also for working on joints and corners. It is unlikely that you will be able to use one roller for different purposes, especially if it gets smeared with glue during the process.

To glue corners and vertical surfaces, tools such as a level, ruler, plumb line, scissors, trowel, trowel and others will be useful. It is recommended to prepare them in advance so that you do not have to be distracted from the repairs being performed and do not waste time.

Where to start wallpapering a room?

Angles are considered the most difficult places for pasting not only because of their shape, but also because they are rarely perfectly even. If you paste the walls joint to joint, then when you start pasting from the corner, a strong vertical distortion may appear. Many are sure that warping can be avoided if you start gluing from the window and doorway, mistakenly believing that in these places the walls are as smooth as possible and perpendicular to the floor.

Before you start gluing, you need to confirm that the window or door has no defects. This can be done using a simple plumb line. Very often, even such a simple study shows that the wall surface has significant shortcomings, which can have an extremely negative impact on the quality of the cladding and the visual characteristics of the entire room after completion repair work.

The method of window covering itself emerged from the tradition of using paper wallpaper. Starting from the window with an overlap and continuing to mount the panels clockwise, you can achieve maximum inconspicuousness of the joints. However, when using non-woven or vinyl facing materials, such an installation system is not at all necessary.

Professionals recommend starting pasting the wall from the corner, if at least one wall joint is fairly even. Therefore, you need to research first problem areas slope and start work from the angle that has the least disadvantages. A preliminary study makes it possible to find out in advance the actual evenness of the walls and choose the most suitable way installation of cladding.

Pasting the internal corners of the room

Before starting work on cladding a room, you should decide on the need to pre-level the walls. If the surfaces have many defects and a strong vertical deviation, they are first leveled with plaster or putty. This method of preparing for installation is especially relevant if you plan to cover a room with expensive wallpaper with silk-screen printing. If preliminary preparation not to do so, during the work there may be a significant overconsumption of facing materials.

If the deviations in the corner are insignificant, you can hide the defects by overlapping pasting. This method is most often used when decorating rooms, since owners usually do not want to spend time and money preparing the surfaces to be decorated. This method involves gluing the first strip of canvas so that it extends 3-4 cm onto the adjacent plane. You can achieve perfectly high-quality wall decoration by using high-quality adhesive, which must be used to coat the corner and adjacent planes as thoroughly as possible.

A vertical mark is first made on the wall, along which one side of the glued segment is adjusted. A piece is applied to it and smoothed to the corner. Next, use the blunt side of a knife or a spatula to press the canvas along the corner. This must be done as carefully as possible so as not to damage expensive facing materials. Next, part of the segment is glued to the adjacent wall and, using a rubber roller, air bubbles are removed from under the material.

Next, new sections are glued to this strip on both sides. Moreover, on the wall on which the majority of the pasted strip is located, the next section is attached end-to-end, and on the adjacent wall, on which the strip has gone a few centimeters, the new strip is attached with an overlap. Now all that remains is to use a plumb line to draw a vertical line at the intersection of the wallpaper strips, after which sharp knife run along the entire height of the wall and remove two sections of wallpaper, resulting in an end-to-end joint.

How to properly cover an outer corner?

The repair procedure described above is almost repeated when gluing external corners. The first strip of material is glued in such a way that several centimeters of the segment are wrapped around the corner. Most often, to ensure high-quality fastening, you have to make several cuts along the segment, at the corner. The cuts will help avoid wrinkles and remove excess adhesive from the wallpaper. Using a sponge or roller, press the strip as carefully as possible onto the surface, after which the strip is cut vertically with a knife so that no more than 1 cm of wallpaper remains on the adjacent wall.

The next strip of wallpaper is attached to the wall, where there is 1 cm of wallpaper. The section is mounted in exactly the same way as the first strip; no more than 5 mm of wallpaper should extend onto the adjacent wall. At correct installation The attachment point will be completely invisible.

Decorating corners in a room is not only the most difficult task when covering surfaces, but also the most important. The overall visual characteristics of the room’s interior depend on how the cladding will look in these places. Therefore, repair work must be carried out very carefully, carefully and slowly. If great experience in the cladding you do not have, it is recommended to start with areas of the room that are least noticeable and where defects in the installation of the cladding will not adversely affect the beauty of the room.

If you decide to make repairs, get ready for a complex process that will take a lot of time and effort. And turning to professionals will also be costly in terms of finances. Therefore, in order to save your money, we suggest doing at least part of the work yourself. For example, you can easily cope with such a process as wallpapering walls. The only difficulty you will have to face is the design of the corners of the room. As a rule, this work always causes difficulties.

Unfortunately, both apartment owners in old buildings and new buildings encounter uneven corners. Often there are defects on the walls that prevent you from hanging wallpaper beautifully and quickly. What to do in such a difficult situation and how to glue wallpaper in the corners? Below you will learn about all important points, and for clarity you can watch the video.

Pasting corners: features

If you are gluing external corner protrusions, make sure that the wallpaper fits tightly to the wall, so it is not recommended to glue the entire strip to the corner at once.

If the joint of the walls is bad, it will simply gather in ugly folds. Moreover, the wallpaper should never end in a corner. It is necessary to leave an overhang of approximately 3 cm (if necessary, trim it with a knife). This way you can achieve a perfectly even pasting. When using thick wallpaper to decorate walls, use a plumb line.

If there are switches or sockets nearby, remove their covers and turn off the electricity. Next, glue the canvas on top, then cut out circles of smaller diameter than the casing itself. When finished you can put them back.

Preliminary preparation

It’s worth noting right away that all the preparation needs to be done long before gluing the wallpaper in the corners. First you need to remove the old finish and level the surface. To align the joints of the walls, use plastic corners, securing them with putty.

Then the surface is treated with a primer, which can be found in every hardware store. The primer is applied with a roller or brush.

How to glue wallpaper in corners: technology

You cannot cover all corners at once. Choose the one from which the work begins. To do this, prepare a strip of the required length and, depending on the type of wallpaper, coat with adhesive composition both one wall (when gluing with non-woven wallpaper) and the wallpaper (in case vinyl wallpaper). If you use plastic corners, you need to coat them with glue.

When processing the wall surface, it is necessary to cover an area slightly wider than the wallpaper (minimum 5 cm).

Then you can start gluing the first canvas. If you are going to start pasting from left to right, you need to apply the left side of the canvas to the corner. The strip of wallpaper is located exactly along its entire length.

Then the canvas must be carefully leveled and all the air expelled from it. This can be done using a plastic spatula or a special roller. After this, the entire wall is covered up to the next corner.

Internal corners

Internal corners are most common in rooms. For their correct pasting these recommendations must be followed.

The strip must be glued so as to cover not just the corner itself, but also several centimeters of the adjacent wall. Next, it is important to press and smooth the wallpaper well using a lint-free cloth or sponge.

Then, using a ruler or tape measure, measure on the adjacent wall from top corner the width of the wallpaper, folding back 3-4 cm. This is necessary so that you can glue the strip overlapping the previous one. Further along these points, using a plumb line or level, you need to draw a line along the wall. The canvas glued to it will be strictly vertical.

Next you need to start gluing the adjacent wall. As noted above, the canvas is glued overlapping the previous one along the drawn line. Further actions traditional: a strip of wallpaper is smoothed and pressed. Using a level, ruler or paint knife, cut through both layers of wallpaper in the corner, removing all scraps. It is important to do this especially carefully. If it is difficult to pry off the edge of the wallpaper, you can carefully bend the second sheet, removing all excess. After this, coat the folded canvas with glue, pressing it well and smoothing it, getting rid of air.

By resorting to this technology for gluing the inner corners of the room, you can make the joint in these places invisible.

External corners

Almost every room has external corners (slopes). For easy and high-quality pasting, you need to make them preliminary alignment using plaster. But this will not always be possible. In this case, without overlapping pasting, you will not be able to achieve the desired result. Let's look at how to wallpaper the outer corners in more detail.

First, you need to glue the wallpaper so as to cover 3-4 centimeters of the adjacent wall. Moreover, it is important that the wallpaper fits evenly and tightly to the wall and corner. For this reason, if necessary, prune them in several places.

After smoothing the canvas, cut off any excess wallpaper (vertically) using a sharp blade or knife, leaving a thin edge.

Then measure the width of the roll with a large ruler or tape measure and, stepping back about 5 mm, draw a vertical line using a plumb line or level. The next strip is glued along it. It will lie flat. As a result, you will end up with a slight overlap. It will hide all defects that arise after cutting the first strip.

Features of gluing wallpaper with a pattern

If your wallpaper has a pattern that has good clarity (for example, some geometric figures and shapes, vertical or horizontal stripes), you need to make sure that wallpapering in the corners does not distort it in any way.

This can be done easily. It is only important not to forget about the need to make a slight overlap on the wall. The canvas must be glued so that the edge lies exactly plumb. Then trim the second edge of the canvas along the edge of the corners.

Most likely, you will not be able to completely eliminate the pattern shift, which will result in a slight distortion remaining. But only you know about this drawback. To identify it, you need to carefully examine the connecting lines of the walls. If you strictly follow the instructions on how to properly glue wallpaper, the canvases will lie exactly vertically, and minor distortions of the pattern will be unnoticeable.

How to glue wallpaper in the corners of a room: some secrets

If your wallpaper is heavy and thick, it would be a good idea to arm yourself with strong adhesive. It will be good if it is transparent.

Sticking to our simple tips You will wallpaper the corners of the room perfectly. Moreover, they will look beautiful, even uneven wall joints. You just need to be patient and do all the work carefully.

Most of our fellow citizens are confident that even with a little experience in repair work, you can hang wallpaper well and beautifully.

This may be true when it comes to straight walls and right angles.

But few apartments, especially the well-known Khrushchev buildings, can boast of such indicators.

How to properly apply wallpaper in corners? Where is it better to start, from which side?

Next, select the angle, with which we will begin work. Preparing a piece of wallpaper the right size, coat it with glue; if necessary, cover the piece of wall for which it is intended. When using plastic corners, they are also coated with the compound. By smearing the wall, you can go a few centimeters beyond the boundaries of the future sheet.

Glue the first strip. If the work is carried out from left to right, then the left side of the strip of wallpaper is applied in the corner. It should be placed perfectly even along its entire length. Clean cloth or special device(plastic spatula or roller) the coating is smoothed over the entire area, moving carefully and gradually, expelling air and removing bubbles. The wall is completely covered up to the nearest corner.

How to glue wallpaper in inner corners

This type of corner is usually found in rooms. For competent and even pasting, you must adhere to the listed recommendations.

The strip is glued so as to cover, along with the corner, several centimeters of the adjacent wall (3-4). It is carefully pressed and smoothed with a clean, lint-free cloth.

Then, on the adjacent wall, using a ruler, the width of the canvas minus the mentioned 3-4 cm is plotted from the upper corner. This is done in order to paste the next strip in relation to the previous one, overlapping.

Using a plumb line or level, a line is drawn down along the entire wall that will serve as a guide. The strip will have to be glued strictly vertically along it.

After this, you can move to the adjacent wall. As already mentioned, the next strip is glued along the line marked on the wall, overlapping the previous one. Just like everyone else, it is carefully smoothed and pressed, especially at the junction of the walls. Then, using a sharp knife, a ruler, and a ruler, both layers of wallpaper are cut in the corner, and unnecessary trimmings are removed.

This must be done carefully so as not to accidentally remove the desired piece of wallpaper. Then we coat the edges of the canvas with glue, smooth it and press it. Make sure no air bubbles form. If you use this technique to finish corners, you can make the corner joint almost invisible visually.

How to glue wallpaper on outside corners

Meanwhile, along with internal corners, there are also external corners in every residential building. These are, for example, familiar slopes to everyone.

To make it easier and more accurate to paste them over, it is advisable to first. Unfortunately, this is not possible in every case. Then you will have to use the overlapping method.

What is the most convenient way to do this?

As when working with internal corners, first a layer of material is glued to the adjacent wall, to the distance of the previously mentioned 3-4 centimeters.

To ensure that the wallpaper adheres evenly to the surfaces, it is possible to carefully trim it in several places. When the canvas is smoothed, use a blade or sharp knife to cut off the excess along the vertical edge, with the exception of the thin edge.

Then, using a large ruler or construction tape measure on the wall, measure a distance equal to the width of the roll plus five millimeters. Using a plumb line from this point, draw a vertical line down.

Next strip We will paste the wallpaper, focusing on it. When gluing two adjacent strips, there will be a slight overlap, which will mask all possible defects formed when cutting the first piece.

How to glue wallpaper with a pattern in the corners

If we have to work with a coating that has a clear and distinct pattern, it is important to make sure that wallpapering in the corners does not distort the existing pattern. This is not as difficult to do as it might seem.

The main thing is not to forget about the need for some overlap. In addition, the canvas must be glued in such a way that the edge exactly matches the plumb line. Then, along the edge of the corner (edge), the second edge is trimmed.

It is quite difficult to prevent the pattern from shifting completely, and slight distortion may occur. But it will be so insignificant that most likely only you will know about it. Only a careful study of the lines of intersection and connection will allow us to notice it. If you follow all the recommendations for gluing internal and external corners, the individual sheets of material will lie exactly vertically, and a slight distortion of the pattern will not be noticeable.

Conclusion

There are little secrets for pasting wallpaper in the corners.

Even if the joints are not very even, they will still look neat and beautiful.

The main thing is to be patient and careful, to carry out all activities slowly and carefully. Then the result will please you!

Non-woven wallpaper - great option finishing building material, combining practicality, convenience and beauty. In the process of gluing such wallpaper, special attention should be paid to how to glue non-woven wallpaper in the corners evenly. Pasting with such material has a number of features that must be taken into account when working. For example, in order to glue non-woven decorations, a special glue based on non-woven material is used. Also, non-woven wallpaper does not require applying glue to the canvas itself, in addition, this type finishing material does not shrink during operation. Basically, they are glued end-to-end (with the exception of external ones).

Scheme for gluing wallpaper in the corners.

Tools and materials

So, in order to glue non-woven decorations, you need the following tools and materials:

non-woven wallpaper;
special glue;
construction tape;
building level;
a simple pencil;
metal spatula 350 mm;
metal spatula 150 mm;
stitching roller;
containers for preparing glue and solutions;
cutting knife;
roller or brush for applying glue;
plastic spatula.

How to glue inner corners with non-woven wallpaper?

Sequence diagram for gluing non-woven wallpaper.

It should be noted that there is one optimal and correct method that tells you how to glue the corners with non-woven wallpaper. Before pasting, the walls of the inner corner must be properly prepared: the old coating is removed, plastering work(if necessary), the walls are leveled, a primer is applied, etc. The adhesive must be prepared according to the instructions immediately before use.

In addition, the wall must be marked: using building level a straight vertical line is marked from the edge of the internal joint at a distance equal to the width with a deduction of 1-1.5 cm. If the pasting does not start from the edge of the internal joint, then a canvas is cut, the width of which is equal to the distance from the joint to the edge with the addition of 1-1.5 see It should be noted that best option- This is a method in which each side of the inner corner is covered with a separate panel. To do this, apply glue with a roller to the marked part of the wall. The application area must correspond to the area of the canvas that will be glued.

You should also additionally apply another layer of glue with a brush along the edge itself, along the upper border of the wall and below, directly at the baseboard.

The prepared canvas (with an allowance of 1-2 cm in length) is applied, starting from the top, to the wall treated with glue and ironed construction spatula in the direction from top to bottom and from the center to the edges. In this way, excess is removed. In this case, the left or right edge of the canvas (depending on which side is pasted over) coincides with the previously applied marking line. Excess is removed in the following way: starting from the top, close to the pasted wall, apply a metal spatula 350 mm long (with smooth walls) or 150 mm long (in case uneven walls), then the excess is removed with a cutting knife, while the knife blade moves along the metal plane of the spatula.

It should be noted that the blade of the cutting knife must be sharp to avoid defects when removing residues. The second part of the internal joint is glued in a similar manner. As a result, a joint of panels is obtained along the edge. Of course, if the reference point for pasting is not a corner, but another landmark, then it is possible to paste a part of the canvas of the appropriate width with a deduction of 1-1.5 cm.

Trimming the excess is done using a knife and spatula.

After gluing, joints on a horizontal surface are processed with a rolling roller.

How to glue external corners with non-woven wallpaper?

To paste the outer corners, all the above preparatory operations are carried out: leveling the walls, preparing glue, etc. It is preferable that there is a whole canvas on the outer corner. This gluing option is suitable specifically for smooth external joints, which must be glued taking into account the selection of the pattern.

If it is not possible to glue the whole canvas during the process of pasting the room, then the outer corner is pasted over with a wallpaper panel so that the overlap is 1.5-2 cm. The other side is pasted over with the whole canvas, while the edge of the panel is glued to the edge. This option is most preferable if the material is intended for painting, which will hide defects in the pasting. However, this option is not suitable for wallpaper that needs to be glued taking into account the selection of the pattern.

Decorating walls with material such as wallpaper is the most common way when the question arises of updating the interior. Inviting specialists to wallpaper a room is convenient, but not necessary. It is enough to be willing to carry out such repairs yourself.

Process Features

If you don’t have the extra money to pay professional finishers, you can handle the wall covering yourself. But there are problems with how to carefully glue the wallpaper in the corners. Before you get started, it's best to know some building codes.

It doesn’t matter in principle where to start wallpapering a room, as long as all the corners are even. If this is not the case, it is better to choose the angle at which, after pasting the wallpaper, you can avoid the skewing of the stripes on flat surface. In any case, it is better to start work from a corner that is not striking or at least will be blocked by furniture in the future. There is certainly no need to choose a protruding corner for pasting with the first canvas.

You should not use a whole piece of wallpaper at the junction of two walls, especially considering that some are very wide. Even on the most even and neat-looking turn, the wallpaper wrinkles and warps slightly, shrinking after drying.

If there are switches or sockets near the corners, it is better to interrupt the electricity supply and remove the covers of these devices before starting work. The protruding parts of the electrical system can simply be covered with wallpaper, and after the work is completed, the places for sockets and switches can be carefully cut out. This will make your work easier and the result will be of better quality.

Surface preparation

To prevent wallpapering the walls from turning into torture at the first turn, you need to carefully prepare the walls for decoration in advance.

Upon closer inspection, the corners may appear crooked, rounded, and sometimes have noticeable depressions and bumps. Therefore, experts advise not to spare time and effort in puttingtying uneven surface, and maybe plaster. A good helper In this case there will be plaster corners.

They are leveled and glued with the same plaster or putty. There are corners for internal and external corners. When the fresh putty is dry, it needs to be rubbed sandpaper to make the surface smooth. Then the corners should be carefully primed and wait until excess moisture will also leave the primer.

All these measures will make the process of pasting corners easier, and you will be satisfied with the result.

If it is not possible to achieve absolute evenness or there is no time to do this, you need to be especially careful when choosing the wallpaper itself. For gluing curved surfaces, loose ones are suitable. Decoration Materials, since they will have to be glued overlapping, and from the side where the canvas is applied to the canvas they should not be noticeable.

A good choice in in this case There will be non-woven wallpaper with small patterns or plain ones. Also, the curvature of the angle can be hidden by non-smooth decorative materials, or even fiberglass for painting.

Pasting step by step:

Before you start pasting, you need to prepare all the tools and materials.
Calculate the area that needs to be covered and buy required amount rolls of wallpaper.
Select the appropriate wallpaper glue and dilute it according to the instructions.
Stock up on a tape measure, a plumb line, a pencil, and a long metal ruler.

Prepare a construction knife, roller, brush, sponge or clean rag.
Bring a stool or stepladder so you can reach the top edge of the wall while working.

Stepping back four or five centimeters from the joint, draw a line along the wall with a pencil, perpendicular to the floor, focusing on a plumb line. Majority modern wallpaper glued joint to joint. Therefore, it depends on how correctly you draw this line and paste the first strip, whether the subsequent strips will lie strictly vertically or skewed.

To be sure, it is better to make pencil guidelines for each of them.

Wallpaper strips are cut with a margin of 2 centimeters, since they become shorter after drying. Since wallpaper is sold in round rolls, which are also quite wide and heavy, it is inconvenient to apply them to the wall every time. So it’s better to cut the decorative fabric on the floor on a surface prepared for rolling out wallpaper.

The wall must be carefully glued with glue. Particular attention should be paid to the corners, because it is in these places that the probability of the decorative layer falling off is greatest. The rule for treating walls with glue applies to all cases: when you decorate walls with paper, non-woven, and vinyl wallpaper. And if you use heavy vinyl wallpaper, you need to coat it with glue as well. During the process, if you hesitate and the glue in the corners has time to dry, be sure to repeat the gluing again.

The technique for gluing corners has long been worked out. There are techniques for gluing both external and internal corners.

External

When finishing walls, convex surfaces are especially striking, so the quality of the outer corners will largely determine the perception of the room as a whole. If the corners are even, it is enough to wrap the wallpaper around the corner three to four centimeters from the protrusions and glue it. If the wallpaper begins to wrinkle, you will have to carefully trim it at the folds. The next strip can be glued to the wall as it is done on a plane.

If the outer corners are crooked, the problem cannot be solved so easily. When you decorate walls with materials that practically do not shrink after drying and fit together end to end, the canvas on the corner must be glued so that it protrudes about five centimeters beyond the turn. When gluing, the other canvas should slightly overlap the previous one. A neat cut is made along the ruler in the middle.

Excess material from above and below remains to be removed. Smooth the canvas thoroughly and press it as tightly as possible to the surface.

If you are dealing with paper wallpaper, there is no need to rush to trim the overlap. Double-check the correctness of the sticker using a plumb line. If the deviations are very large, clearly extra wallpaper You can carefully cut along the intended line.

To complete the design of the outer corner and to prevent the wallpaper on the ledge from fraying over time, it is better to use plastic corners for wallpaper, matched to it in color. You need to calculate in advance how many of them will be needed for the job. Glue the corners using liquid nails or using silicone sealant.

The outer corner approach is also used on ledges around doors and windows. Beams and other similar elements with external corners are pasted separately in a similar way using scraps of wallpaper that remain after gluing the canvases on the walls.

Interior

To properly dispose of the next canvas in the corner, you need to measure the distance from the outermost glued strip to the joint and add another two centimeters to the resulting figure. The wallpaper strip must be cut taking this into account and applied to the wall, previously coated with glue. At correct pruning a narrow strip of wallpaper should be on the adjacent strip behind the joint line. Smooth the canvas with a roller and a rag to release all the air between the wall and the future decorative covering.

If such a bubble does not want to disappear, experienced people recommend piercing it to release the air, and using a syringe, pour a little glue under the wallpaper, and then smooth it with a roller.

If the corner is uneven and wrinkles appear on the strip during gluing, use scissors, as in the case of the outer corner, to make neat cuts towards the fold and glue the canvas.

The neighboring strip needs to be glued on the second wall with an overlap of a couple of centimeters on the previous one. Check the quality of your work using a plumb line. When smoothing the second sheet, you must not press the edge of the required allowance against the wall.

Then, using a ruler, you need to cut through the layers construction knife, remove the extra one upper layer, and then the lower segments. Coat the wallpaper in the corner with glue again and press it against the wall so that there are no air bubbles left.

If everything is done carefully, you will get an even seam.

Subtleties of working with drawings

There are certain difficulties in order to glue protruding and internal corners wallpaper with a pattern. Using decorative coating with a clear, pronounced pattern, you will have to try not to distort it at the junction. It is necessary to foresee this task in advance when selecting materials in the store.

Distortion is especially noticeable on wallpaper with vertical stripes. If the design is horizontal, it may appear skewed relative to the ceiling and floor.

This can only be avoided if the corners are overlapped. The edge of the canvas must be glued strictly plumb. The adjacent strip must be carefully trimmed along the edge of the corner. Moreover, when covering a wall with paper wallpaper, all these manipulations must be carried out not only carefully, but also with maximum speed. Otherwise, the coating itself will spread and you will ruin more than one strip of wallpaper.

To make the unevenness less noticeable, it is recommended to hide the resulting joint in the upper part of the corner. It is unlikely that it will be possible to avoid a certain shift in the pattern, but with a competent approach it will be so unnoticeable that the eye will only cling to the joints of those who have carried out this repair themselves.