Product from the company "Cricket": gas lighter. How to fill a lighter "Cricket"? How to properly refuel a gas lighter
Read also
Lighters from the Cricket company are in great demand among buyers. They are easy to use and easy to care for. It also attracts attention that it is easy to fill with gas these Cricket products. The lighter can therefore serve enough long time and do not require replacement. Read more about the above products.
Lighter "Cricket": description
The above product is manufactured by Swedish Match in Manila (Philippines) and Assen (Holland). It was in 1961, one might say, that this Cricket lighter was born. White color is the most popular among buyers. To date, the manufacturer has already produced and successfully sold more than 500 million of the above products.
In the production of the Cricket lighter, about 40 stages of quality control are used.
Products are made of nylon. This material, unlike plastic, is more durable and does not burn in the sun. This makes it possible to make the walls of the product thinner and fill it big amount gas.
The lighter of the above manufacturer may have the following types Ignition:
- piezo;
- silicon.
The product is reliably protected from gas leakage, so in the burning sun it will by no means turn into a small bomb.
Advantages of the above product
The lighter from the company "Cricket" has the following features:
- has an automatic, without regulator, combustion valve;
- the lever is spring-loaded, does not contain backlash;
- this product is elegant and thin, so it fits easily into a pack of cigarettes;
- a fully metal combustion valve, 3 mm in size, has a Cricket lighter;
- features a safe constant flame height.
How to refuel a Cricket lighter?
Experts advise before refueling the above product to be placed in freezer. So it will fill up more densely. For this work, you can use a gas canister. In most cases, it is enough for several gas stations.
There is a special valve on the back of the product. Through it, refueling of the lighter is carried out. Sometimes it requires cleaning, as over time it often becomes clogged with dust or debris. With a sharp object, you need to press the valve, gas residues with impurities will come out of the lighter.
In the kit, adapters for different valves are necessarily attached to the can. It is important to choose the right size product. And also remember that the adapter must fit tightly on the above valve.
During refueling, the lighter should be with the valve up, and the device should be located with the stem down. The process of filling with gas the above product "Cricket" lasts no more than 10 seconds. In no case is the lighter checked immediately for performance. You should still wait about three minutes. This is necessary in order to equalize the pressure inside the product.
It is necessary to follow some simple recommendations before carrying out the above actions with the Cricket gas product. The lighter must be in good working condition. Also, for refueling, you will need a small can of gas.
It is important to remember your safety. You need to make sure that there are no sources of ignition near you. In addition, the room must be well ventilated.
It is advisable to wear gloves on your hands. Avoid contact of gas with eyes.
In no case should a product such as Cricket be filled to the end. The lighter can explode, because remember that the gas enters it under pressure. Be careful!
The Cricket lighter has gained popularity among buyers due to its excellent quality and extended service life. Use wisely and enjoy!
How to refuel a lighter?
The advantages of plastic lighters over conventional matches are obvious. They do not deteriorate from high humidity, are inexpensive, and they have enough fuel for a long time, but still, sooner or later it ends. But this problem can also be solved, because the lighter can be refueled independently. How to refuel a lighter? The lighter can run on gas or gasoline, the type of refueling depends on its type.
Refueling a gas lighter
Most often, its body is made of transparent material, which allows you to see the amount of gas remaining. If you strike several times to light a flame that gradually becomes smaller, then the lighter definitely needs to be refilled.
To fill the lighter with gas, buy a special can of gas in the store, it is better if it is expensive and high-quality fuel. Attachments must be included different diameter. Select safe place(far from sources of fire), best by a window. Next, follow these steps:
- Attach the appropriate nozzle to the barrel pin.
- Press the lighter filler valve (with a match or a pen) to release excess air.
- Insert the nozzle of the spray can into the hole with the valve and press firmly.
- After about 7 seconds, pull back the can sharply.
Refueling a petrol lighter
Refuel Zippo lighter or Sarome is also not difficult. For these purposes, use branded gasoline. From low-quality fuel, it will smoke heavily, and cigarettes will get an unpleasant aftertaste.
Refuel in a location away from any sources of fire. The procedure will be like this:
At the same time, silicon can also be changed. When you have finished refueling, remove the gasoline, wash your hands thoroughly with soap and water, and dry the lighter and the surface of the table you have been working on. Only after that you can check the performance of the lighter.
Cheap gas lighters refuel with gas may not make sense. Although why not? But beautiful original lighters just have to be filled, otherwise, why are they needed then?
The filling procedure is simple, but there are some nuances.
You will need a can of gas for lighters and possibly a set of nozzles. But as practice shows, the nozzle of the can itself is usually suitable.
Especially for clarity, we took a transparent lighter to see the filling process.
Since lighters are usually worn in pockets or bags, the valve can become clogged with some kind of debris or dust. Therefore, the first step is to clean the valve.
To do this, press the center of the valve with a sharp object. You should hear a characteristic "puff". Residual gas is released under pressure. This is usually enough to purge debris from the valve.
Next, if you right-handed, take lighter in right hand , bottle to the left. If you lefty, then vice versa. This is done so that the leading hand is the guide, there is less deviation from the refueling guide line, and there is less error in tilting the can from the lighter valve.
Turn the can upside down and insert the nozzle into the lighter valve. With a confident strong movement, press lighter for a can with gas for 2-3 seconds.
This is how a tighter connection is achieved between the lighter and gas spray. If gas comes out, this means that the canister and the lighter are not aligned and the nozzle has not entered the valve well or the lighter is already full.
To be sure, the procedure can be repeated.
As we can see, the lighter is almost full.
If there is already little gas in the can and the pressure in it is weak, then in order to fuller refuel gas lighter, you can put it before refueling for a few minutes in freezer fridge...
Then refuel the lighter as usual. With a cold charging method, the lighter has to be replenished with gas much less frequently.
Necessarily give the lighter lie down at room temperature 20 minutes, because when refueling, the expanding gas cools itself and cools the lighter, which affects its operation.
The lighter has firmly entered the lives of people since the end of the 19th century. This modern look The fire starter is designed for thousands of uses. Apart from practical use, the lighter is endowed with the function of prestigious decorative element, of course, if it is expensive and branded.
Species and types
Types of lighters these days are very diverse. They can be plastic, metal or a combination. By type of refueling, gasoline and gas specimens are produced. The latter are more common. Gasoline last longer, but require frequent refueling. Usually they are more expensive than gas. According to the way the fire is ignited, these accessories can be mechanical, turbo or piezo. In addition, lighters differ in what method was used to apply a pattern to their surface. When decorating plastic, the pad printing technique (tampon printing) is used. Metal is usually engraved. Also, lighters are disposable and reusable. The first ones are much cheaper, but after they run out of gas, they have to be thrown away. Lighters, in addition to being used to light cigarettes and cigars, can be used in a number of other cases. Produced, for example, special kind designed for ignition of burners of gas stoves.
Refueling with gas
Having bought an expensive reusable model, the user often wonders how to fill the lighter with gas. This one would seem simple process has some nuances. First of all, you need to make sure that the lighter is reusable. Even if there is a hole at the bottom of the case, this does not mean that it is refueling. Next we present a little instruction how to fill the lighter with gas:
- remember that refueling can only be started after the previous portion of gas has been completely used;
- set the valve that regulates the strength of the flame to a minimum;
- take a thin sharp object and push the valve responsible for air intake with it;
- after all the gas is completely out of the case, try to set fire to the lighter (it should not work);
- take the cartridge and, pressing it firmly against the inlet, slightly pressing, let the gas into the body.
The whole process takes no more than 2 - 3 minutes. Before filling the lighter with gas, you need to keep in mind that this only requires triple-purified butane. Otherwise, a gas that has an unacceptable amount of impurities may clog it.
Repair
Like any household item, lighters sometimes break. If this is a fairly expensive model, you can try to repair it. But for this it is best to contact a special workshop. Repairing lighters is a rather complicated matter. If you don't want to spend too much on it, it's best to just buy a new one.
Now you know how to fill the lighter with gas, and if necessary, you can easily do it. And finally, a little advice. When buying, try to avoid a counterfeit product. Lighter is enough dangerous object, so it is better to use branded models.
One of best gifts able to serve long years, traditionally is a lighter. The service life of a quality product is almost unlimited, subject to careful handling. If you have become the proud owner of an expensive product from a well-known manufacturer, we recommend that you ask how to fill the lighter with gas.
You will need:
- Canister with gas;
- Lighter;
- Clip.
Preparatory stage
We usually carry this item in our pockets or bags. For this reason, before proceeding to the procedure, you need to clean the valve. Take any sharp object and press on the center of the part. You can use a paper clip, a nail, a nail file, a knife, etc. In this case, a characteristic zilch will be heard. The air outlet of the wave is enough to blow through the passage.
Let's get to the point
Refueling with gasoline
The Zippo lighter has now become a cult accessory. As you know, it runs on gasoline.
- In order to pour fuel into it, you will have to pull the case up and remove the mechanism from the shell.
- Then turn the device upside down and peel back the felt pad. You will see the fuel chamber, and you should pour gasoline into it. This must be done with extreme caution, making sure that there is no transfusion.
- Refueling a Zippo lighter is recommended only specialized tool offered by the manufacturer under the Lighter Fluid label.
- It is better to fill the lighter with gas in the corridor or on the balcony, especially if there is a small child in the house.
- If there is very little gas left in the canister, and the pressure is very weak, it is recommended to place it in the refrigerator for several minutes before manipulation.
- After you manage to properly fill the gas lighter, be sure to adjust the combustion level valve by setting it to the minimum. If necessary, increase the intensity of the fire.
As you know, gifts given from the bottom of the heart last much longer. However, much depends on how carefully the owner treats them. We hope that our advice will help extend the life of a stylish and expensive accessory, which is the keeper of pleasant experiences.