How nice it is to sit comfortably with your family and drink a cup of freshly brewed tea. In ancient times, large shiny samovars were used for such tea parties. But in the modern world, they have been relegated to the shelves of antique dealers, and teapots have replaced them. In our article we will find out what a kettle for a gas stove should be like and look at well-known brands of manufacturers.

How to choose a kettle for a gas stove?

To choose a convenient, high-quality, and most importantly safe kettle for a gas stove, you need to know a few rules for choosing a product.

Kettle lid

It is worth paying special attention to such an important point as fixing the lid. Most modern models of kettles involve the use of lid linings that are not fixed in the bosoms. The use of such cookware can be dangerous, since under the influence of high pressure of hot steam the lid can fall off and cause burns. Teapots with a tight lid are the best option for every day.

Kettle handle

It is also worth paying attention to the kettle handle. It should be made of heat-resistant plastic that will not heat up when boiling. Many unscrupulous manufacturers replace expensive raw materials with a cheaper rubberized analogue. It certainly feels comfortable, but at a heating temperature above 70 degrees it will begin to heat up and melt.

The handle of teapots made of wood has low thermal conductivity, but tends to dry out and become deformed.

Bottom of the kettle

The bottom of kettles designed for gas stoves differs from other types. As a rule, thick steel or even cast iron is used to make the lower part of the cookware. Thanks to these materials, the temperature is evenly distributed and the water is heated faster. In addition, the thick bottom of the kettle cools down much more slowly.

Should I choose a kettle with a whistle for a gas stove?

For the everyday rhythm of life, it is recommended to choose a kettle model with a built-in whistle. As a rule, it is installed in the spout of the product and with a characteristic whistle notifies you when the water is boiling. The whistle occurs due to the high pressure of hot steam through a small hole in the valve. This feature allows you to go about your business and not stand around waiting for the kettle. Please note that you should not pour water above the prescribed mark. Otherwise, when heating and expanding, water will get inside the whistle and there will be no characteristic sound.

Types of kettles for gas stoves

Today's market offers a huge number of types of kettles for gas stoves, made from a wide variety of materials. Let's look at the advantages and disadvantages of each of them.

Enameled teapot

The most popular teapots are enameled. Products made from this material have an ergonomic shape and a variety of designs.

What are the advantages of an enamel teapot?

The main advantage of an enamel kettle is environmental friendliness. This coating is absolutely harmless and does not impart foreign tastes or impurities even when boiled water stagnates for a long time. Also, enamel teapots have a fairly large volume, which is especially important for large families. Thanks to a special type of coating, the temperature of water after heating or boiling decreases more slowly than in dishes of other materials.

Cons of a teapot with enamel

Unfortunately, enamel teapots also have a number of disadvantages. The main disadvantage of this product is its fragility. Over time, under the influence of temperature, the enamel can crack and peel off on the outside of the cookware. Impacts and aggressive cleaning with abrasive cleaning agents can also cause this. The enamel coating is susceptible to sudden temperature changes, so you should not light a fire directly under the cookware. First turn on the gas stove, and then put the kettle on the burner. Otherwise, black spots may form on the enamel, which will be difficult to remove without effort.

Glass teapot

Lately, glass teapots have become increasingly popular. Having unusual shapes and design, it will easily fit into even the most sophisticated interior.

What are the advantages of glass teapots?

The high thermal conductivity of glass ensures uniform heating over an open fire. In addition, teapots made from this material are mainly attractive for their transparency. You can watch the process of water boiling and even brew tea in it. Particularly effective is the use of rolled or budding tea, which, when brewed, opens into herbal compositions.

Cons of a glass teapot

Among the disadvantages of glass teapots, it is worth noting that they are quite fragile and their use should be extremely careful. It is important to choose well-known brands of glassware manufacturers, as you risk running into a fake and injuring yourself with a low-quality product. If your water contains limescale or you do not filter it before boiling, it is worth paying attention to the fact that over time a small deposit will form on the inside of the kettle.

Kettle for gas stove made of steel

As a rule, when making a kettle from steel, they use a special anti-corrosion coating or, as in common people, stainless steel.

What are the advantages of a steel kettle?

The undeniable advantage of a steel kettle is the lack of toxicity. Stainless steel not only does not emit any harmful substances, but also does not react with impurities contained in water. Also, steel kettles are among the most durable and are not corroded by chemical and alkaline cleaners.

Disadvantages of a stainless steel kettle

Unfortunately, a stainless steel kettle quickly forms scale on the inside of the bottom. To avoid this, it is recommended to boil a kettle with vinegar or citric acid once a week. Also, small drops of water or condensation form small but unsightly smudges on the mirror surface. After each use, try to rub the surface with a microfiber or felt cloth.

Ceramic teapot

Natural clay is used to make a ceramic teapot. Under the influence of firing, this material acquires strength, then it is coated with a polymer heat-resistant varnish.

What are the advantages of a ceramic teapot?

A ceramic teapot can easily be called the most natural in composition. This product does not emit synthetic impurities and retains the taste and temperature of water for a long time. Most manufacturers of ceramic teapots colorfully decorate the outer part of the dishes, stylizing them with painting. In addition, the varnish coating can be easily cleaned even with abrasive agents.

Disadvantages of ceramics

Despite the noticeable weight of the ceramic teapot, the product is quite fragile. Over time, dishes made from this material may crack under the influence of an open fire from a gas stove, so everyday use is not recommended. Also, the ceramic material of the kettle is inconvenient due to its low heat conductivity; therefore, the process of boiling water will take much longer than usual.

Cast iron teapot

Manufacturers have long abandoned the use of cast iron to make teapots. The expensive process of processing this material is not compensated by consumer demand.

Advantages of a cast iron kettle

A significant advantage of a cast iron kettle is its durability. Cast iron alloy can not only serve you for decades, but also maintain its original appearance. Also, it retains heat perfectly and the water cools much more slowly. The outer part of the product is easy to clean and does not scratch.

Disadvantages of a cast iron kettle

Despite all the advantages, cast iron teapots have no less significant disadvantages. These include the noticeable weight of the product, which is not particularly convenient for constant use. And despite all the strength of cast iron, moving elements can be destroyed under mechanical stress. Basically these are the bases for attaching the handle.

Aluminum kettle

Aluminum teapots were especially popular in Soviet canteens and field kitchens about 20 years ago.

What are the advantages of an aluminum kettle?

Aluminum is a lightweight metal, so teapots made from it are easy to use. Also, this material is quite cheap, hence the insignificant production costs and low cost. Due to the high thermal conductivity of the aluminum body of the kettle, water boils quickly enough.

Disadvantages of an aluminum kettle

The most important and dangerous drawback is toxicity. An aluminum kettle is capable of not only forming and oxidizing various heavy metals, but also changing the taste of water during long-term storage. Also, despite its predominantly rapid heating, aluminum also cools quickly. Design solutions for an aluminum alloy teapot are not provided and do not even have a ceramic coating. This is another additional drawback, since for the interior or as household utensils such a product will look rustic. Due to the “softness” of aluminum, the kettle is more susceptible to deformation than any other material. Even a slight blow to a table or sink will form a small dent, which will be quite problematic to fix.

Manufacturers of quality kettles for gas stoves

There are more than 200 teapot manufacturers successfully operating on today's market. Let's look at the most popular brands.

Brands of metal kettles

The brands of metal teapots presented below have been producing their products for quite a long time and have already been able to establish themselves as one of the best.

Enameled Vitross teapots

The manufacturer of enamel cookware Vitross has been producing its products in Russia for more than 10 years. Branded heat-resistant enamel for covering teapots provides resistance to mechanical and chemical influences, which allows the products to be washed even in dishwashers.

Stainless steel kettles Metrot

The Serbian brand Metrot is popular not only in Russia, but also in Europe. Thanks to the patented steel polishing technology, teapots of this brand are quite resistant to mechanical stress. Even when cleaning the surface with a wire brush or abrasive agents, the integrity of the polish is not compromised.

Cast iron teapots Iwachu

The famous company, specializing in the manufacture of cast iron teapots, has existed for more than 60 years. The Iwachu company was founded in Japan, where the traditions of the tea ceremony are observed and revered to this day. To produce cast iron cookware, the factory uses only high-quality raw materials and processes the products by hand. The ornament is also stamped using a hand press. It is worth noting that the maximum volume of Iwachu brand teapots is only 0.7 liters.

Manufacturer of copper teapots Sri Ram Export

The world-famous Indian manufacturer of copper products, Sri Ram Export, specializes not only in decorative items, but also in tableware, including teapots. A distinctive feature inherent in this brand is the high quality of manufactured products and original author's designs. The volume of teapots produced by the Indian factory is 3 liters. Products with a smaller volume are made to order.

Kamjove glass teapot manufacturer

One of the most popular manufacturers of glass teapots is the Chinese company Kamjove. This factory produces products from heat-resistant raw materials, which allows the products to be used over an open fire. In China, it is customary to prepare tea for one time, so the maximum volume produced by this brand of teapots is 1.5 liters. The glass stand included in the tea set allows you to use the product not only for boiling water, but also for brewing tea.

Regardless of the material from which a kettle for a gas stove is made, the key to long service and proper appearance of the product partly depends on proper care of it.

The obvious advantage of conventional kettles, in which water is boiled on the stove, is their low price. Enameled kettle , which you buy for a relatively low price, will last you at least two to three years. Stainless steel kettles are more expensive, but if you buy a really high-quality product, you will use it for more than ten years. Therefore, if you are a traditionalist and prefer to buy yourself a regular kettle, all that remains is to choose which one:

Enameled teapots

Enameled made of cast iron, aluminum or some other metal, which is then covered with several layers of enamel. It protects the metal from corrosion and oxidation upon contact with products. This product lasts 5 – 7 years with frequent use. When choosing an enamel teapot, carefully consider whether the enamel is evenly applied and whether there are any cracks or chips on it. After all, if the enamel cracks, the teapot can no longer be used, since particles of enamel can get into the tea.

Stainless steel teapots

Stainless steel teapots They boil quickly, last a long time, and are easy to clean. Such teapots are made from an alloy of chromium and nickel, from which scalpels and other medical instruments are also made. The bottom of such kettles is predominantly thickened, due to which the heat is distributed evenly throughout them and is retained for a long time. However, it is not easy to purchase truly high-quality “stainless steel” from us: there are many Chinese and Turkish counterfeits on the market made of cheap metal, often of unknown composition, which can even be hazardous to health. When buying stainless steel cookware, pay attention to the availability of state quality certificates for this product.

Aluminum kettles

Aluminum kettles lightweight and inexpensive. Water boils in them faster than in any others. Many of these products are equipped with a whistle, which gives a signal when it is time to remove the kettle from the stove. When choosing such a kettle, make sure that there are no dents on its walls and bottom.

And yet, what material should you buy a teapot from?

I recommend buying stainless steel kettle . Such teapots are much less toxic and carcinogenic than aluminum and plastic teapots. And this, in my opinion, is one of the most important things to pay attention to when choosing a kettle.

There are many answers to the question “how does the morning begin,” however, the most popular and widespread answer is still: “With a cup of coffee.” To some extent, this is true, but without what is it impossible to drink that coveted cup of coffee or tea in the morning? Without coffee, tea, water, sugar and, of course, a kettle. It is this attribute that allows us to enjoy drinks that have long become a tradition. Let's take a closer look at this indispensable accessory. How did the electric kettle appear, what are the products made from, which model is better, and what are the advantages of the kettle. You will learn about this from the article prepared for you.

A little history of the teapot

The teapot has long and very closely entered our lives. There is hardly a single family on the planet that does not have a kettle in their house. The first models appeared in the Middle Kingdom, which is not surprising, since China is considered the birthplace of tea in general.

The Chinese guest arrived in Europe much later; only by the 17th century were Europeans able to experience the happiness of becoming acquainted with an important accessory of the tea ceremony. True, the teapots of those times were little like their modern counterparts, for example, the first models that appeared in Rus', by the way.

For the appearance of an “irreplaceable friend” on the territory of our country, we must thank the northern Scandinavian tribes. It was difficult to call such a teapot a teapot even at that time - its shape resembled an egg with a handle, which was hung from the ceiling and a fire was lit under it. The Museum of Teapots has preserved several of these specimens; in appearance, they resemble something between a washstand and a vessel for dispensing herbal medicinal settings. Products were then made only from porcelain or clay.

The teapot acquired its more or less familiar form only towards the end of the 18th century, just before the very peak of its evolution and development.

The appearance of the electric kettle

Inspired by the discovery of electric current and incandescent lamps, inventors began to modify and modify everything they could get their hands on! Our “friend” did not escape this fate either. And, already at the end of the 19th century, the German company AEG introduced the first electric kettles to the world.

Initially, the heating element itself resembled a medium-sized electric stove simply screwed to the bottom of the kettle; the design was large, heavy and very cumbersome. But already in the 20s of the 20th century, inventors again improved the electric kettle by placing the heating element inside, and then an automatic system appeared that made heating possible only if there was a sufficient amount of water. Over time, the bulky and inconvenient heating coil was replaced by a disk, which is a flat metal substance to which contacts are connected, due to which the water heats up much faster.

What are electric kettles made of and which one is better?

In the age of high technology, the choice of electric kettles is simply dizzying.

Initially they were made:

• made of copper;
• become;
• aluminum

After a certain time, traditional materials were successfully replaced by convenient, cheap and lightweight plastic, however, soon metal electric kettles, this time made of steel, came into fashion again. The latest fashion trends are glass electric kettles. This electric kettle is a regular device for heating water, but at the same time it is very different from its metal and plastic counterparts.

Why is a glass electric kettle better?

The glass electric kettle has a number of advantages and here are just a few of them:

1. Glass material is not only beautiful, but also environmentally natural, which is much safer for health than plastic, even food grade.
2. The appearance of this electric kettle is simply mesmerizing. The designers did their best; the lighting, which changes color when the kettle is in operation, and the very sight of boiling water, in the era of gadgets and electronics, is calming and fits very succinctly into any interior. An electric glass teapot is an indispensable attribute of any holiday and, undoubtedly, an attractive gift.
3. If you are not a fan of noise, it is better to opt for a glass teapot. When water boils, glass, unlike plastic and metal, does not vibrate, due to which the model operates almost silently.
4. It is much easier to clean such a unit than a plastic one. Thanks to the transparent glass, scale cannot go unnoticed, and it does not eat into the walls, as is the case with plastic or metal.
5. If a plastic or metal electric kettle cools down quite quickly, and after half an hour you have to boil the water again, then everything is different. The glass cools down slowly, which will help save electricity.

The undeniable advantages of an electric kettle:

As you know, all models are divided into 2 categories: for gas stoves and electric. The electric model is distinguished by its ability to heat water on its own. What device do you need? Of course, a glass electric kettle is the one that is more convenient to use and more attractive. Of course, if you have a gas stove in your house, then a regular kettle will help you save money, as it saves electricity. But it heats water much slower than electric. The electric kettle will boil in a matter of seconds.

It was said above that glass is an ideal material. Even if you have decided on the material of the model, it will not be superfluous to consider the various functions and conveniences of the electrical device.

One of the points that you should pay attention to is the dimensions, the possibility of transportation and compliance with the interior. An electric kettle is convenient in offices and in the countryside - it is easily portable and does not take up much space. Elegant models not only perfectly complement the interior, but also decorate it.

If you purchase an electric kettle, remember that with disk heater The water will boil faster and it will be more convenient to clean such a kettle from scale. The automatic shut-off function is convenient - then, even if you forget that the kettle is on, after boiling it will turn off itself. Agree, it’s convenient and you don’t need to think when leaving the house: “Is the kettle turned off?”

Pay attention to the device with water filter(unless you have a water purification system installed). It is better if it is removable so that it can be cleaned without problems. Today there are many features offered, but when choosing, remember that for each additional feature you will pay more than without them.

To summarize, we can confidently note the leadership of such a model as glass electric kettle. Despite his relative youth, he confidently took TOP positions not only on store shelves, but also in the hearts of numerous fans.

In every home, a kettle is one of the main attributes in the kitchen. Whether we drink coffee in the morning or tea in the evening, we use this wonderful device. How to choose exactly the one that is convenient for you? The answer is simple - give preference electric glass models. Today there is a huge selection on the market: plastic, stainless steel, porcelain, electric. All models have both their own advantages and disadvantages. As for the glass electric kettle, there are undoubtedly many more advantages here.

The very first question a buyer should ask when choosing an electric kettle is what material to choose for his new household appliance? Yes, that's where we'll start, with materials. Basically, three materials and their modifications and combinations are popular on the market: plastic, metal and glass.

Plastic electric kettles are the most popular models among all. After all, now, in the age of plastic, this is the most optimal material, both in price and availability and characteristics. What are the positive aspects of plastic? Firstly, plastic is durable, although over time the appearance deteriorates more than in teapots made of glass or metal. Secondly, such teapots are strong, they are difficult to break and deform, unless they are cheap fakes. Thirdly, plastic is a unique material for creating any design. Plastic electric kettles can be of any shape, color and texture, so it will not be difficult to fit such a model into every kitchen interior. These are positives, but there are also negatives. The most important thing is environmental friendliness. Plastic itself can react with liquids, and when heated, this process increases even more. Remember, medicines are still sold in glass vials, although it is more expensive. But there is no need to exaggerate, teapots are made from environmentally friendly materials and when choosing a device from a well-known brand, you won’t have to taste the plastic. Speaking of health, even counterfeits are unlikely to lead to illness, unless you just feel a slight taste from the plastic and its smell when boiling. So, to summarize, plastic is a good solution, such kettles are the most popular and affordable, which means it’s worth buying plastic electric kettles.

Let's talk about metal further, from an environmental point of view this material is better than plastic, although the taste of metal is also felt a little, but iron is also useful. In terms of durability, metal models of teapots are also a good choice; they will last a long time, if not a lifetime (the body is definitely eternal) and will always look new. The strength is similar, metal is a strong solution and breaking such a device will be harder than its plastic counterparts. As for the design, there is a small choice on the market, but it does exist, and there is a combination, that is, a metal kettle will be covered with plastic, which will give the same advantages as in plastic appliances. These are all positives, and now there are negatives that are everywhere. Firstly, metal electric kettles get very hot, which is unsafe for children. Although in a plastic shell, such a kettle will not let you get burned. Secondly, metal kettles are more expensive, which is a compelling factor for many. Thirdly, metal is heavier than plastic and this kettle with water will weigh at least 3 kilograms. You can also mention that if the kettle is all metal, the water level is not visible. When there is a level, there may be a leak in metal appliances. Therefore, it is not worth choosing such models on the market, at a low price, from an unknown manufacturer. Due to the difference in thermal expansion of plastic and metal, a leak can actually appear, which has happened in some models, even from popular companies. Fourthly, metal electric kettles have increased noise during operation. As a result, metal kettles, with a good choice, will be no worse than plastic electric kettles, and even better. In any case, they are stronger, more environmentally friendly and more durable (we mean the body).

Kettles made of aluminum alloys are close to stainless steel kettles in terms of consumer performance.

Glass, as already mentioned, is the most environmentally friendly product, so from this point of view, such teapots are ideal for health. In terms of beauty, glass models are also very interesting, but still this is a matter of taste. As a result, there are many positives and it is better to talk only about the flaws. Glass teapots, like metal, get very hot and can cause burns. They are also fragile and easy to break. But if the glass teapot is adequately protected in plastic, then these two main disadvantages disappear by themselves, leaving only their positive aspects. The only thing is that there are very few glass electric kettles on the market and the choice here comes down to only a few models.

What is the outcome of selection based on material? It's simple, we weigh all the factors and choose the best for ourselves. And in each case, the choice will be correct, since this is just an individuality, and it is simply impossible to predetermine one material for a teapot.

Cost distribution depending on the material (from cheap to expensive):

1) Plastic

3) Stainless steel/aluminum

4) thermos teapots with an internal stainless steel flask and a plastic outer body.

2. Heating elements.
We come to the second factor - the choice based on the heating element. Please note that the buyer should think exactly the way our thoughts go in order to effectively, quickly and correctly select an electric kettle. And when you have decided on the material, you need to decide on the water heating elements. There are two types of kettles based on this factor: with an open and closed heating element. Let's consider each of these types individually.

The most popular nowadays are teapots with a closed heating element, otherwise known as a disk. If we look inside such a kettle, we will not see anything there except a metal bottom, this is the same disk. The store will have the majority of these models, and this already speaks of the good qualities of this type of kettle. But it’s impossible to quickly and simply point out the positives of heating elements, they just do their job well, period, it’s better to point out the negatives of each type. The first negative of electric kettles with a closed spiral is increased noise. The second negative is that they are a little more expensive. Two negatives, the only and biggest ones, although it is clear that they can be survived, because the noise is not much greater, and the price is not much higher.

Kettles with an open heating element, or more popularly, with an open spiral, are a less successful version of electric kettles on the market. There are more negatives here: firstly, the spiral has an irregular shape and covers the bottom, which prevents the device from being properly descaled. Secondly, the spiral is located at a certain height from the bottom, which means that only with a large volume of water will it be completely closed, that is, turning it on with a glass of water is contraindicated. Compared to disc kettles, moreover, with heating regulators, even 100 g can be boiled or heated. The third negative of such kettles is that the water heats up a little slower, and all this is due to the small area of ​​​​contact between the water and the metal.

As you can see, the choice is obvious, it would seem, but still there is not much difference between the first and second ones, and if you buy a kettle with an open spiral, you will only lose a little in quality, but you will gain the same little in price. And with proper use, both kettles will work hard and for a long time.
3. Such a small detail as a stand.
Before moving on to other important factors of choice, we think that we need to say something else about such a little thing as a stand. They come in two types: pirouette type and regular type. "Pirouette" is a central round contact, this is the most popular type now. A common stand and once quite popular, this is a side-mounted stand with a rectangular shape. As practice has shown, the pirouette type stand is more practical and durable. Here the kettle can stand in any position, it is convenient for both right- and left-handed people to take it. Here is such a small detail that is also worth thinking about a little.

The power cord is connected to the stand, and it does not interfere with removing the kettle. The stand has a pocket for storing the power cord. The length of power cords for kettles is from 0.6 to 1.3 m. A long power cord can be dangerous: you can get caught on it and damage the insulation. Therefore, you should not extend the power cord. It is better to find a convenient place for the kettle close to an electrical outlet.
4. Volume of the kettle.
And here we come, for many, to the most important evaluation criterion. Most people only pay attention to this (and power), which is not correct. After all, quality and durability do not depend at all on volume, and there is nothing to choose here. You just need to count how many family members you have, how often you drink tea, and in general remember how much water you heat during lunch or dinner, and that’s it, the choice will become clear.

To boil a minimum volume of water, a few seconds and a very small amount of electricity are enough. This indicator is the lowest for metal kettles, worse for glass ones, and even worse for plastic ones with an open heating element.
For those who want numbers, let’s say teapots come in different sizes, from 0.5 l. up to 4 liters, the popular volume is 1.5-2 liters, which is quite enough for a large family. Volume 1.7-1.8 is ideal, and there are many such kettles in stores.
5. Power.
The second criterion, which is also very significant for the majority, is the power of the electrical appliance. We will say that you don’t need to think too much about this, most kettles have a power of 2-2.5 kW and that’s enough. We remember that the boiling speed depends on the power, and manufacturers in any case try to increase the speed optimally to the maximum. The difference between boiling 2 liter electric kettles. and the power of 2 and 2.5 kW is small and it’s not worth chasing big numbers. The ideal solution is a power of 2-2.2 kW, which is what most models with a volume of 1.5-2 liters have. Whoever buys a kettle with a power of 2.5-3 kW can receive, in addition to rapid boiling, permanent shutdown of the “plugs”. And if you take into account the included electric stove and refrigerator, then not every kitchen wiring will withstand such loads. Be careful if you wish to get a powerful kettle, as this may lead to a fire.
6. Filters.
When we have already decided on the power, volume, body material and type of heating element of the future kettle, we think about filters. This is especially important if the water in your home is not very clean. Modern electric kettles come in two types: with 1 or 2 filters. It is very rare that no filters are provided at all; such kettles can only be found on the market at a very, very low price. One filter, which is located in the neck and prevents scale from entering the cups, should always be present. The second filter, which purifies the water as it enters the kettle, is a matter of taste. It is clear that models with double filters are much more expensive. And if this is a high-quality filtration system for incoming water, then the prices are generally very, very high, like for an electric kettle. Your health is up to you to decide, although with normal water a kettle in one filter will be enough. And if the water is filtered, it is better at the “faucet and central water pipe” links.

When boiling water in any kettle, scale forms, even when using a gold-plated heating element. Filtered water does not help either, since household filters only retain solid particles and do not capture dissolved lime. Scale deteriorates the quality of water and causes it to become cloudy. It can lead to premature shutdown of the kettle before the water boils, to overheating and burning of the heating element. The market offers special anti-scale products. In the absence of special means, scale is removed using a solution of citric acid and baking soda. Add 1 teaspoon of citric acid and a little soda to 1 liter of water. This solution must be boiled and left overnight. In the morning, you need to drain the solution, rinse the kettle and then you can continue to use it. It is recommended to descale it twice a year.
7. Temperature adjustment.
The most important criteria for choosing a kettle have already been indicated; there are still additional options that will brighten up your life. For example, temperature control, which is present on popular brands of kettles. There are many positives from such a power regulator, especially for people who know a lot about good tea or for those who have small children. For example, you need to feed a child, then you have a baby food regime, with a temperature of 60 degrees. For tea lovers, 80, 90 or 98 for brewing Japanese, green, black tea, respectively. It’s very convenient and there’s even some savings on electricity.

There are kettles that can maintain the temperature for several hours in the desired mode, which is also useful sometimes. If these models interest you, we study branded items that are not as exorbitant in price as they seem.

8. Brands.
Well, as always, we won’t advertise anything, but by choosing kettles from the manufacturers Braun, Philips, Tefal, we will insure ourselves against a bad choice. Moreover, all these companies make both inexpensive models and multifunctional kettles with high price indicators. You can choose Moulinex electric kettles, which are of high quality and even more accessible to customers at low prices.

9. Modifications of teapots.
In addition to ordinary electric kettles, there are also modified models with special features. The most popular are: thermos kettles (other names, thermopot kettles, thermopots), tea sets and tea makers. We will now consider each type, maybe someone will be interested in modern trends that help make tea drinking even more interesting and convenient.

Thermopot kettles are very interesting models and many, even when choosing a regular kettle, give a preference to buy just such a modification. And don’t think that this kettle comes as an addition to the main one, no, it has all the functions of a regular kettle and its additional charms. This is the same ordinary kettle, albeit of an unusual shape, but with the properties of a thermos. When you boil water in it, it will simply retain heat for a long time. There are models of thermopots with heating, but even with or without this function, it still retains heat for a long time due to its special design. True, water from such teapots is poured differently, through a faucet, which is not only convenient, albeit peculiar, but also carries healing properties. After all, it is in this way that water entering a glass or mug is enriched with oxygen and becomes energetically saturated. Old Asian tea drinking traditions recommend pouring water into tea in order to make the process ideal for the health of body and soul, and improved well-being. This tea will be more aromatic and will give a strong boost of energy, because that’s what the thermopot is designed for, to carry energy through water. And the properties of a thermopot kettle do not allow water to boil constantly, and as is known, constant boiling of the same water causes it to die. As a result, thermos teapots have a lot of functions for creating a healthy, lively, energy-rich drink. They have the lowest heating element power and are the most economical to operate.

Tea sets are similar to thermopot teapots, differing only in the additional teapot. All this is located on a special tray, a joint stand, which can be easily disconnected from the connecting cord and placed on the table.

The tea maker is also not much different from the two modifications described above, and its task is also to make good tea. In appearance and the method of preparing tea, this is the same samovar, but electric.

10. Design.
Considering the materials of electric kettles, we have already said a lot about the design and it only needs to be supplemented with advanced functions of electrical appliances that make it even more beautiful. A regular backlight that signals whether the appliance is on or off can also do a lot. When choosing, if possible, it is worth turning on the options you like in order to look at their appearance and when they are turned on. As a last resort, just carefully study the packaging or ask the seller about the backlight colors. After all, some new models not only light up the indicator light on the button, they also illuminate the inside. Some models also illuminate the water level, and there are electric kettles that glow in different colors depending on the heat. Of course, this does not show the quality of the appliance, but this point cannot be ignored, because the design of the kettle, the main appliance in the kitchen, gives an image to the entire room. Agree that having white walls, white household appliances and green countertops of kitchen furniture, even a white kettle, but with blue lighting, will not work, but green lights will fit perfectly.

The design greatly influences the price. The simplest teapots are 7-8 times cheaper than the most prestigious ones. It’s better not to argue about the attractiveness of different design solutions: everyone has their own taste. However, when choosing a color, we recommend not to forget that white is the safest color for plastic that comes into contact with water and is suitable for any kitchen. White plastics are the most harmless; they contain less harmful impurities than colored ones and have less effect on the taste of water. Gourmets distinguish the taste of tea prepared in teapots made of different materials. Gourmets and those people who pay increased attention to maintaining their health give preference to environmentally friendly materials.

Kettles sometimes amaze with the abundance of models presented; they all differ in color, design, price and even quality. The variety of materials from which the kettle is made is presented in different price categories. Today, to make a kettle, manufacturers resort to various types of materials - this includes high-quality plastic, glass and stainless steel. The material itself does not affect the quality of the device, but the lightness of the product, ease of use and price may depend on it.

Teapots made from high-quality plastic are much cheaper than products made from glass and stainless steel. They themselves are lighter and retain heat longer. As a rule, teapots made of plastic have a very wide range of colors; this material allows you to paint products in all the colors of the rainbow. Devices made from this material are designed with an open heating element and, unlike glass teapots, their body hardly heats up.

For tea lovers, a teapot made of glass is best. These devices can serve not only as objects for heating water, but also for brewing tea. The technology of the material allows this to be done without causing any damage to taste. A glass teapot requires careful handling, because glass, even if it is highly durable, tends to break, and you can get burned on a glass teapot.

As for stainless steel products, they are distinguished by their durability and are quite reliable in operation; they do not have a wide selection of colors, but they usually heat water faster than kettles made from other materials, mainly due to the fact that most Steel models include disc heaters.

Metal, glass, and plastic are the three materials that are mainly used to make teapots. Choosing this household item is not difficult; it is difficult to decide which kettle is better.

Vote

How much does your electric kettle cost?