What to make a flowerbed from with your own hands. Flowerbeds are the most beautiful. Preparation for work and rules for designing a flower bed
A flower bed is a real decoration for any home and garden. It adds charm and sophistication to the surrounding environment. There are many options for creating a beautiful and even unusual flower bed. Many would prefer to call a landscape designer, but you can create natural beauty with your own hands. Read about unusual, vertical, bottle and other flower beds in our article below.
A flower bed with flowers pleases with its appearance and brings aesthetic pleasure. While having morning tea on the veranda, your gaze falls on a beautiful floral ensemble. But to create it, you need to work a little. First of all, you need to choose a place for the flower bed: in front of the gate, behind the house, near the gazebo or along the paths. Where on the property is there space suitable for flower plantings? Measure out the territory.
Prepare the material that will be used to decorate the flowerbed: tires, stones, wooden stakes, mesh, etc. To harmoniously design a flower bed, you first need to draw a planned sketch. It will be easy to navigate the plantings and the structure.
The most important thing in the formation of a flower bed will be the selection of soil. It is necessary to select as much land as is needed for planting flowers. If this is an alpine hill, then the amount of soil should be poured in excess. The soil of the flower garden must be fertilized; plants on such soil will quickly take root and delight the owners and their guests with their beauty.
Beautiful flowerbed with your own hands, step by step with photos
Almost every gardener dreams of a beautiful flower bed, but not everyone succeeds. On our website you will find beautiful compositions that even the most inexperienced landowner can reproduce. See the selection below.
round flower bed
Select a conditional space that will later be filled with flowers. Dig it up, fertilize it, and then plant it in rows around the circumference, starting from the edge and ending in the middle. This way you can understand whether the composition will be placed evenly.
Between the rows of flowers you can plant herbs, low-growing shrubs, flowers of various colors and bud shapes. In the future, the flowerbed can be supplemented with beautiful figurines or new plantings. For example, as in the photo below, the flower spacing is replaced by potted planting of petunias. The central place in the composition is occupied by a tall bush.
oval flower bed
For an oval shape, the area is prepared in advance. Soil, small stones, material for framing - are planned in advance in the required quantity. First, we dig up the ground, form flower beds, plant flowers and frame them.
Now it’s time to fill up the bare areas with small stones or residues from processing wooden structures. Pebbles, stone chips or ordinary wood chips will help us as the necessary material. If desired, the flowerbed area is decorated with figurines and lamps. After some downtime, the flowerbed can be disbanded. Remove the slate fence and put stones in its place.
floral ensemble
Beautifully planted flower beds look very harmonious, but beautifully located ones add zest to the flower ensemble. A flower bed of several small flower beds will be amazing in any yard. This will simultaneously complement the space for observing natural beauty. The flowerbed area can be located next to a gazebo, swing, or in the home garden.
Prepare borders on your garden plot. Flowerbeds should be located within the boundaries of the circle. One part can be decorated in one color, the other in a different shade, and the color combination can be alternated. The flower bed should be located on a slight elevation; for this, it is framed with slate or wooden planks, like a supporting wall.
Subsequently, containers with a wooden support are filled with earth and flowers. Next year they can be disbanded, for example, high beds can be set aside for growing vegetables. But, if you still want to create a new flower arrangement, continue decorating your yard.
DIY stone flowerbed, step by step with photo
It would seem that flowers and stones are an impossible combination. But in our case, rest assured that the result will be a wonderful composition.
stone flower bed
A stone flowerbed will fit perfectly on any site with a slope or a flat location. We mark the plowed area in advance with stonework. We make so-called stone sides around the entire perimeter. We will make stone borders between the allocated space and combine different floral sketches. Fill the free space with small stones.
We decorate the center of the flowerbed with a large boulder or a group of large stones. We select flowers according to climatic conditions. We also think through the tone combination in advance. An equipped stone flowerbed will last for many years. Over time, it can be raised or a transition between tiers can be made.
alpine slide
Alpine slide - will fit harmoniously into any area of the garden. In the shade, near the barbecue or gazebo, a beautiful stone flowerbed will delight with its beauty. The essence of such a slide is the stone reinforcement. The formed pile of earth is strengthened in tiers with stone cobblestones. The lower tier is laid out with the largest stones.
Next, the stone flowerbed is divided into zones. Often, several types of plants are used in such plantings: flowers, herbs, shrubs, trees. Each shoot is separated by a stone path. A free plot of land can also be sprinkled with small stones.
DIY flowerbed for beginners
You can create a beautiful flower bed under the kitchen window, in front of or behind the fence, in the garden, near sidewalk paths or between them. Let's make a simple flowerbed, without stone thresholds and wooden supports. On the selected area, mark the place where the flowers will be located. If it's a lawn, remove the grass top.
Dig up the soil. Dig holes for flowers or sow seeds. To begin with, you can plant a flowerbed with one variety of flowers, so it will be easier to care for them. If you wish, choose varieties of the same type that are simultaneously similar. Further, the number of varieties can be increased. To complete the flower bed, you can use a small fence.
Based on the results, water the flower bed generously. You just need to do this after installing the fence. There is no point in doing it until the work is completed, otherwise you will be smeared with dirt. In addition, when installing a fence, plants can be damaged.
Do-it-yourself vertical flower beds, step by step with photos
Vertical flower beds save a lot of space. In the garden plot, it is important to choose a place to place the planting. A high flower bed usually attracts the eye from the first minute, so you need to plant lush, bright or even climbing flowers in containers.
flower bed made of plastic pipe and aluminum mesh
One of the successful examples of a vertical flower bed is a flower garden, equipped with a large-diameter plastic pipe, a sewer pipe with a diameter of 150 mm and a chain-link mesh. The mesh is rolled into a tube, the ends are fastened with pieces of aluminum wire or plastic clips.
The mesh is wrapped with black or green film on top; this color will harmonize with the planting. The inside is filled with earth. On top of the film, punctures are made through the plastic so that a plant can be placed in the hole. Instead of a pipe, you can take several pots. Flowers are planted and the finished flowerbed is moved to a permanent location.
flowerbed of pots
A flower bed made of pots, made on a vertical basis, is perfect for both indoor and outdoor placement. The fixing base can be different, from a metal or wooden rod to a rope rope.
To create a flower bed, we will prepare several plastic or metal pots; ceramic ones are not suitable for these purposes, because... When exposed to outdoor conditions, the ceramic surface will deteriorate; moreover, this material is very fragile.
The number of pots should be selected based on the height of the flowerbed; the higher the flowerbed, the more pots. If desired, they can be painted in a suitable color. It is advisable to take a metal pipe with a diameter of 25 mm as a support. After the pots have dried, the first pot is strung on a support and installed vertically, the pipe is driven through the pot to stabilize the vertical flower bed into the ground, to a depth of 20 or 30 cm. The pot can contain ordinary soil, sprinkled with decorating crumbs. This first pot will be the base of the flower bed. Next, on top of the first vessel, through the top, a second pot is placed on the pipe at an angle, soil is poured into it, a flower is planted or seeds are sown. Next, through the top, the next pot is added to the pipe. After all the pots are installed, the plants are watered. For stability, it is better to take a lower pot with a larger diameter than the upper ones.
If you plan to place a hanging vertical flower bed, then the pots are attached to a vertical wall or post. Such a flower bed is assembled according to the diagram given above.
finished vertical flower bed
A vertical flower bed requires a lot of effort to create and implement the intended design. However, most supermarkets have solved this problem for us and sell ready-made designs that need to be partially modified. A wooden support, special shelves with fastenings or a row of plastic pots - all this can be used in your garden plot.
All that is required of the gardener is to fill the flower containers with soil and plant the plants there. A minimum of time spent and the finished flowerbed will delight its owners in just a couple of hours. This option is ideal for those who are starting to delve into the basics of gardening.
DIY tire flowerbed, ideas with photos
Waste material should not always be thrown into the trash. It can be very useful on the farm, for example, like these old tires. Just look at the masterpieces home craftsmen have created from them:
- Flowerbed minion. Several tires of different diameters lined up in a row, painted in just a couple of colors and decorated with several covers, will transform the yard and make it more fun;
- Watch. With such a flower bed, the owners will be able to keep up everywhere. After all, the hands on the clock can be made quite real;
- Cup. A flowerbed-cup is one of the most common options for creating from tires, but it is precisely this color that makes it a real masterpiece. The traditional Russian flowerbed ornament invites you to have a cup of tea in the shady garden.
DIY bottle flowerbed
Plastic bottles are a container that is used by almost every inhabitant of the Earth. If you count how much water, juice, and lemonade we drink from them, you can build a whole mountain, but it’s better to use them for business. For example, make a flower bed out of bottles. To create a home flower garden, both plastic and glass bottles of various sizes are suitable.
- Swan flower bed made of plastic bottles;
- Multi-tiered flowerbed made of glass bottles;
- Flowerbed piglet from a 5-liter bottle.
How to decorate a flowerbed with your own hands
Every gardener can create a flowerbed on his own. With a combination of desire and opportunity, real masterpieces can live in the garden, but you must follow some rules:
- It is not necessary to use templates; a flowerbed can be made based on your personal imagination. For example, build it in the shape of a ladybug, a slide with twigs and logs. The main thing is that flowers can live in this creation;
- If you don’t have any imagination for decorating a flowerbed, open the Internet. On our website you will definitely find a suitable option or complement your idea;
- To create a flowerbed, you shouldn’t immediately run to the store, remember about the deposits of unnecessary things, maybe it’s their turn?
- Place the flowerbed in an area where the flowers will feel comfortable. Do not plant plants in too shady or sunny places. Also think about space, flowers need freedom;
- It is better to select nearby plants for the flower bed according to their flowering time. Do not forget that each plant has its own lifespan. Soon it will lose color and the flowerbed will be empty, so plants should be planted in tiers or rows with different flowering periods. When some flowers shed their bright buds, others begin to bloom;
- It is also worth making distinctions between species based on height of growth. You should not plant small flowers between tall bushy creatures. Small flowers will not have enough light, and it will look completely inharmonious. As a rule, tall flowers are planted in the center of the flowerbed, in the corners or in the background;
- Color combination. The most popular in floriculture is the combination of white and pink, pink-violet or yellow-red shades. Beautiful colors are always pleasing to look at;
- At the end of planting, be sure to remember to water. Even if you are planting ready-made materials, for their comfortable adaptation to new conditions, you should moisten the soil.
Do-it-yourself flower beds from improvised means, with photos
- Flowerbed-carousel;
- Flowerbed-bicycle;
- Flowerbed-washbasin with plates.
DIY flowerbed diagrams
An important fact in the design of a flower bed is the successful placement of plants. The type of flower garden depends on this. A beautifully created panel of flowers attracts attention. To do this, you need to draw up a diagram of the flower bed in advance, which is usually drawn up by landscape designers. But today we will do without them. See below for ready-made diagrams for creating flower beds.
- Central flowerbed;
- Summer flower garden. According to this pattern, it will bloom all summer;
- A simple flowerbed with tulips.
video: unusual flower garden
How we want every corner of the dacha to please our eyes. And if stationary flower beds require preliminary preparation and careful planning, then we can make small flower beds with our own hands from scrap materials, which can quickly add an additional bright element to any corner of our garden.
With minimal effort you can turn any unnecessary container into a flower container.
Bright red salvia is a favorite choice for a bonfire bed.
Do you have a bunch of old flower pots in your house? Let's make cheerful flower beds with our own hands that will make everyone smile.
Have you always wanted to try making a flower garden from a single log?
If you don’t have a suitable log, you can make such a flower garden yourself from the remains of a slab.
Tired of plastic bottles at your dacha? There is a chance to make a vertical flower bed out of them for a gazebo or terrace.
You can easily make a flower garden from building blocks. Depending on how the blocks are painted, you can create a completely different mood: from strictly black to a fun colored mosaic.
No old containers, boards, bottles and other unnecessary things? Believe it or not, an ordinary thick rag and a cement solution can become the basis for an unusual flower garden.
An option for those who still have old unnecessary containers at their dacha. Your dacha - your rules, perhaps such a flower garden will not become a permanent guest in your garden, but it will lift your spirits for the season.
A flower garden option for fans of crafts made from tires.
Indeed, you can make flower beds with your own hands from any available materials. For example, this flower garden is made from an old motorcycle tank.
Any old box in skillful hands has a chance to turn into an unusual flower garden.
If you are a fan of landscaping using flower containers, then you know about their high cost. You can make such flower containers from cement yourself, decorating them to your liking.
It's always a pity to part with unnecessary things that we have become accustomed to. We can say goodbye to them beautifully, making an unusual flower garden out of them with our own hands, and then calmly throw them away.
Even if these things are of small capacity, they can still serve us as a cute flower garden.
Near the house itself we usually have a blind area near the foundation and shade - this is not the best place for a large flower bed. But a small stump from an old tree and one bush of ampelous petunia can create a small miracle.
Any unpretentious annuals can be planted both in a flower bed and in containers. These containers can beautify your garden lawn, porch or gazebo. In order to give these flower beds a rustic style, we wrap them in burlap.
Any old tub or even just an unnecessary barrel, plus a small bush of creeping flowers - and you already have a beautiful flower stream right under the windows of the house.
Plastic containers with flowers look better if they are brought a little closer to their natural appearance, for example, placed in a wicker basket.
Unusual DIY flower beds made from wood cuts require more frequent watering - unlike a regular flower bed, the flowers in them dry out faster.
Not only flowers, but also ornamental grasses look beautiful in the garden. Look how interestingly this sheep flower garden is organized.
Taking an original flower container is one of the simplest and most effective ideas. Cheerful flower caterpillars will illuminate your entire garden with their bright smile.
The unusual swan flower garden skillfully uses the bright contrast between white and blue bushes of small flowers.
If no one needs your old car anymore, and there is no hope of getting rid of it, you can make an unusual flower garden out of it with your own hands. The solution, of course, is not for everyone.
DIY flower garden using garden figurines. Such a nice company will always be waiting for you near the porch if you make a small front garden with your own hands.
A beautiful idea for a flower garden: a trellis with a perennial vine in the shape of a heart. Your garden will immediately take on a romantic look.
The owner of an old clothing mannequin has the chance to create a small garden masterpiece with his own hands, like this goldilocks flower garden.
If you decide to decorate your garden with flowers, then an old dried tree is not a hindrance for you, but a new challenge for design ideas. An unusual flower bowl with petunias will be the subject of admiration for your family and friends.
There are both simple and complex ideas for flower beds, but any of them will decorate your garden. Even if you are not a wonderful and skilled gardener, it is enough to buy a couple of flower seedlings in the spring and experiment with them.
Even if in the first year, your flower beds, made with your own hands from scrap materials, do not turn out as beautiful as in these photos, you will be able to draw conclusions and increase your skills every year, and sooner or later your garden will become your pride.
A flower bed is a real decoration for any garden plot or local area. Usually these mini-oases have a beautiful curly shape and are fenced with small fences. However, flower beds can be made from absolutely any thing. It's time to sort through the deposits in the barn and garage and choose for creativity those items that, it would seem, are no longer suitable for anything. It’s easy to make flowerbeds with your own hands from available materials - all you need to do is apply a little imagination, patience and desire to create unique installations from fresh flowers and objects in your local area, which can thereby be given a second life.
Those who want to amaze guests and neighbors with the beauty and unusualness of their garden plot often invite landscape designers to visit. The profession of these people is to create unique beauty from flowers, combining them in all possible ways. However, the services of such people are quite expensive. What to do if you want to decorate your dacha, but don’t have the extra money for it? Of course, use your own imagination and use your ability to search for the necessary information on the Internet! And, having learned something new and interesting, put it into practice.
New life for old things - crafts for the garden
Schemes and shapes of flower beds, methods of combining plants by color and shape can easily be found in gardening magazines or on websites for flower fans. At the same time, one version of a flower bed can be combined with another at your request and, thus, it is often possible to create completely unique, inimitable and very beautiful installations.
But before we present options for flower beds that can be made from old unnecessary things, let’s get acquainted with what types of flower beds exist.
Table. Types and types of flower beds and flower beds.
| Name, photo | Characteristic |
|---|---|
| All plants begin flowering at the same time, but the flowers differ in color and type of buds, as well as in size. |
| Flowers in this case are planted in groups, selected according to the timing of flowering so as to evenly replace each other as some fade. |
| A flowerbed in which plants of the same type, type, and color are planted. |
| In this case, all the plants spread directly along the surface of the earth, covering it tightly. |
| Walls, fences, and garden buildings are decorated in this way. Boxes with flowers stacked on top of each other, where plants grow through the cracks in the containers, can also serve as a vertical flowerbed. |
| Such flower beds are usually formed around bushes and tree trunks. |
| Simply put, this is a flower border enclosing a garden path or lawn. |
| A flowerbed-slide with inclusions of stones and driftwood, which is covered with all kinds of, usually low, plants - small perennials. |
| Any flower bed that is formed in a wide vase or other container can be portable and often decorates alleys or the porch of a house. |
| A flowerbed, to create which various additional structures can be used. |
Each of these types of flower beds can be improved and turned into a real work of art. And creating an unusual art object based on an ordinary flower garden is an excellent opportunity to try yourself as a landscape designer.
What are the benefits of unusual flower beds?
There are several main reasons why flower beds from old shoes, teapots or chests of drawers may appear on some gardeners' plots.
- Such flower beds attract the attention of guests, demonstrating the owner’s creativity.
What can you make a flower bed from?
You can make unusual flower beds with your own hands from almost anything. For example, flower beds made from car tires have already become familiar, but still remain relevant. Moreover, if earlier they were simply filled with soil where flowers were planted, now gardeners are trying to give them unusual shapes - swans, flowers, shuttlecocks and much more can be easily created from an outdated tire and an ordinary large knife.
Often flower beds are formed from stones, driftwood, and embankments. It is enough to pour a mound of soil, compact it, cover it with pieces of brick or large pebbles, and on top lay several picturesque branches selected from the forest, plant flowers - and the original alpine hill is ready.
A very beautiful flower garden can be created from old furniture. In this case, anything can be used - the frame of an old sofa, chairs, beds, chests of drawers.
Favorite, but, like tires, the usual “bases” for flower beds are plumbing equipment. Old pipes, bathtubs, sinks can become not only a pond, but also a flowerbed itself.
Flowerbeds on wheels have recently become increasingly popular. Moreover, absolutely any product that has wheels can be turned into an original flower garden. If you have an old bicycle, then just attach a couple of leaky buckets to it, paint them and plant vines in them - that’s it, your unusual transport is ready! Broken and rusty cars, motorcycle cradles and other items are used for the same purpose.
On a note! It’s especially chic to turn an old “Zaporozhets” or “Moskvich” into a flowerbed. Everyone will definitely envy such a flower garden. And you shouldn’t feel sorry for the old car - no one will drive it anyway.
The fence around the house is often decorated with old shoes, which are turned into original flowerpots. Make drainage holes in the soles, fill the boots with soil, plant flowers and hang them by the laces from the railings. You can also form real installations from shoes by placing them in rows on a shelf - here you have a ready-made vertical flower bed, which, if desired, can be easily disassembled and the plantings moved to another place.
Teapots, barrels, basins and other items can become hanging mini-flower beds or beautiful flowerpots. Even an old stump that you have been meaning to uproot for a long time can become a wonderful flower garden. The most important thing is to show your imagination and see what you can turn an ordinary and seemingly worthless object into.
Do-it-yourself vertical flower beds - a magnificent decoration for a summer house
Where to begin?
Where to start creating an unusual homemade flower bed? The first step is to clear out the old junk in your shed or garage. Then you need to think over the design of the flower bed and choose a place for its location. To do this, carefully examine the area and choose a piece of land that is clearly visible. It should also be relatively well lit.
On a note! It is best to place flower beds (and especially unusual ones) where they will be clearly visible from the house or porch, as well as from the street, if you want to please people passing by with their beauty.
When you create a flowerbed project, be sure to draw the shape of the flower bed on paper, and also mark where and what flowers should be. Consider their flowering time, growth rate, petal color, height and much more. If you are forming compositions from perennials, then you should select plants with special care - if next year it is easy to replace with others, then perennial crops will grow in your flowerbed for several years.
Those items from which it is planned to create a flower garden should, if necessary, be washed, provided with drainage holes, painted, and unnecessary parts removed. If this is some kind of container, then expanded clay must be poured onto the bottom as a drainage material so that excess moisture does not accumulate in the soil itself.
DIY tire flowerbed
We present to your attention two master classes on creating flower beds from scrap materials. Let's try to make a flower garden from old tires and ordinary logs. Since car “shoes” are very often used as the basis of a flower bed, let’s start with them.
Step 1. Select the tire sizes you need. Tire wear is not important here - it can be completely “bald”. But the tire itself must be intact. Also take and sharpen a regular kitchen knife well. It is best to take one with a pointed tip and a larger blade to make cutting more comfortable.
Step 2. On the surface of the tire, draw a zigzag along which you will cut the rubber to give the tire a “flower” shape. It is convenient to draw with a pen (in the image the zigzag is indicated by a red line to make it easier to see).
Step 3. The thinnest layer of rubber is in the sidewall of the tire, so start cutting from there. And having already made a hole in it, cut the rubber up and down from it.
On a note! Before cutting, make sure there is no metal cord inside the sidewall. The cord is usually found in truck tires.
Step 4. On the outer corners, cut the pattern almost to the beginning of the tread.
Step 5. Cut out the entire design in the same way.
Step 6. Turn the tire over and, starting to cut the rubber in the middle of its side, cut off the excess.
Step 7 Along the edge of the back side of the trimmed tire, make cuts in a circle until the tread begins.
Step 8 Now turn the tire inside out. The preparation for the flower bed is ready.
This blank can be painted, dried, and then filled with soil and flowers can be planted.
Video - Flowerbed from a tire
Tire prices
tires
DIY flowerbed made from old chairs
Very nice and unusual flower beds can be made from old chairs. To do this, you will need the chairs or stools themselves, some paint, sandpaper, brushes and, of course, desire.
How to make a flowerbed from old chairs
Step 1. First, remove the old paint from the chairs and carefully sand their surface with sandpaper. If necessary, they can be partially disassembled, but there is no need to rush. It is important to decide how the container with flowers will be attached. It is quite possible that it will be placed in a hole cut in the seat. In this case, cut this hole to the size of the pot.
Step 2. Remove dust from the surface of the chairs and coat them with paint. It is most convenient to paint from spray cans. The procedure should be carried out outdoors, as the paint has a very strong odor that is difficult to remove. After this, dry the chairs well.
Step 3. You can also paint the pot or flower boxes if desired.
Step 4. You can create a beautiful floral design on the backs of chairs using paints and brushes. It is best to paint with acrylic paints.
Step 5. After the drawings have dried, install the pots, add soil and plant the plants.
Video - DIY log flowerbed
Bottles are also good
Original and interesting design solutions can be realized if you try to use bottles as a flowerbed (or rather, its fencing). In this case, both plastic and glass are suitable.
If you fill plastic bottles with sand (for weight) and stick them around the perimeter of the flower bed, you get a very durable fence that is not afraid of any weather conditions. At the same time, bottles, if they are colored, do not need to be painted. But if desired, an original ornament may well appear on their surface.
Quite often, owners of country houses are concerned not only about the amount of harvest, but also about the aesthetically attractive appearance of their plot. It is much more pleasant to work or relax surrounded by beautiful elements of landscape design.
Manufacturers are ready to provide a large number of flowerpots made of plastic or concrete - this will help transform the entire local area. But often, buying ready-made items for arranging the area adjacent to the house can have a negative impact on the family budget.
You can make beautiful flower beds with your own hands from available materials, using bricks, old tires, plastic bottles and multi-colored paints.
Creating a flower garden from car tires
DIY tire flower beds are the most effective and cost-effective solution. The flexible and elastic structure of car tires allows you to give products the most bizarre shape.
Car enthusiasts simply throw old tires into a landfill, where they lie for years and pollute the environment. By giving a second life to unnecessary tires, you not only decorate your flower garden, but also take care of the environment. Finished products can be painted in different colors, complement the composition with other ornamental materials, creating unique landscape elements. The photo below demonstrates the organic combination of bright decorative flowers and the painted surface of the flower bed.
Advantages of decorative products made from waste rubber
A variety of DIY tire flower beds amaze with their uniqueness and original design. In addition, landscape design items have many other advantages:
- simple manufacturing technology;
- the ability to create unusual shapes;
- aesthetics of decorative elements;
- the finished product can be painted;
- small expenses (purchase of paint and varnish products).
There are practically no disadvantages to this method of making landscape decorations. The only limitation is personal aversion to using old tires and reluctance to spend personal time and effort on creating outdoor flowerpots.
To create spectacular flower beds from tires with your own hands (photo below), you don’t have to be a professional decorator. It is enough to realize your creative potential and spend some money and free time.
Types of flower beds and ways to decorate the site
Flower beds made from wheel tires can be:
- high and low;
- single-tier and multi-tier;
- in the form of flora or fauna;
- suspended structures.
Advice! To make the simplest flower beds from tires with your own hands, you need to paint them in bright colors and place them on top of each other.
In addition to used tires, to create a flower garden you will need: a sharp knife, paint, stones of different sizes, and leftover building materials. Once the location and shape of the future flower bed has been determined, you can begin to work.
The simplest shape is considered to be a flower. The larger the tire, the larger the tire bed will be. For work, it is better to use used soft thin rubber made in Europe. The tire is pre-cleaned, washed and dried well. After this, the outlines of the petals are drawn with chalk. The selected areas are cut out and the upper part is removed.
Carved flower bed from tires
A do-it-yourself carved flower bed from tires with a photo selection of the main stages of the work.
Enamel, nitro paint or oil paint is used as a decorative coating. The paint and varnish material is applied to a clean, dry surface. If desired, you can use an aerosol can or car paint.
Advice! To prevent the roots of planted plants from “burning” in a decorative flower garden, you should paint the flower bed in the lightest possible shades.
How to make a flowerbed from a tire in several tiers? To create a multi-tiered flower bed, you need to select several tires of different or the same circumference. The middle is carefully cut out of them so as to form circles. A large tire is installed first, its base is lined with expanded clay or crushed stone, and a fertile layer of soil is poured on top. Subsequent smaller tires are installed in a similar manner. The number of tiers depends on the desire and selected elements. Flowering plants are planted in the space between the installed rings.
Multi-tiered flower bed made of tires with your own hands before and after photos.
One of the most elegant creations from the old protectors is the swan flowerbed.
A car tire painted snow-white can become a real masterpiece of landscape design.
It is necessary to retreat four centimeters from the edge of the tire and make two similarly rounded cuts on opposite sides. The middle section will become the neck, and wings are cut out of the wide part.
In order for the wings to appear, the tire must be turned out. Feathering can be created using cuts of varying lengths. The wings can be positioned at will, at any angle. At the end of the work, the swan is painted white.
How to make a flower bed from a tire is clearly shown in the photo.
Various uses for plastic containers
Quite often, multi-colored plastic bottles are used to create decorative soda compositions. Transparent packaging plastic is a fairly strong and reliable material, so flower beds made from plastic bottles will last for decades. For work, you can use containers of green, white, red, yellowish, blue and even black colors. Each color is suitable for the embodiment of a particular idea.
The easiest way to create a flower bed from plastic bottles is to lay out an original design using empty containers.
A decorative flowerbed created with your own hands from scrap materials - photo of a beautiful lake with two herons and aquatic vegetation.
To create an artistic composition, you need to use the required number of bottles of a certain color.
Advice! It is not recommended to paint plastic containers, because over time the paint may crack and a flower bed made from plastic bottles will lose its attractive appearance.
Under the created composition it is necessary to dig a small pit of the required size. For stability, the bottles are filled with sand and then buried according to the drawing.
Plastic, unique in its qualities, can be used to make various animals and birds, gnomes and other fairy-tale characters. Using plastic bottles, artistic illustrations for any children's fairy tale are created. It could be “Kolobok”, “The Frog Princess” or “The Three Little Pigs”. Gardeners really liked the graceful bees - they are easy to make from small yellow and black bottles. Light wings are made of transparent plastic.
Decorative figurines and a small flowerbed made from plastic bottles with your own hands are shown in the photo below.
Forming a flower bed using bricks
The use of brick allows you to create the most luxurious and unusual flower beds in shape. Most often, flower beds of geometric shapes are made from brick with your own hands: round, square or rectangular. If desired, you can make an original multi-stage or acute-angled design.
The easiest way is to make a brick border. Decorative fencing does not retain moisture, but maintains clear boundaries of the flower garden. By laying the brick end-to-end, you can significantly reduce the washability of the soil, but in this case, the cost of a brick flower bed will increase slightly due to increased material consumption.
Making round flower beds out of brick is a little more difficult. To create a rounded shape, you need to use brick halves, which will need to be pre-cut.
Multi-tiered brick flowerbeds that contain several flower beds of varying heights look great on a personal plot. The construction of a structure of such complexity will be a source of special pride for the owners.
DIY round and rectangular flower beds made of bricks photo.
Do-it-yourself flowerbed from scrap materials photo more
Flowerbeds with decorative crushed stone
Making a flowerbed with your own hands from available materials is an exciting activity that you can do not only on your own, but also to involve the whole family in the creative process. An interesting and exciting hobby will help not only to arrange your garden plot in an original and tasteful way, but also to have a great time in your free time.
Not a single summer cottage is complete without a flower bed: flowers decorate the yard and are pleasing to the eye, a successful composition is the pride of the owners. If you add fantasy design from non-traditional materials to the beauty of flowers, you can create unique floral masterpieces that have the exclusivity of your idea. To do this, we need to take a fresh look at some things that we usually throw in a landfill, or that have been collecting dust in the shed for years. What can be used to create an original flower bed? Let's try to figure it out.
Peculiarities
A flower bed is a kind of frame for a picture of natural splendor. Even modest wildflowers and cereals, decorated in the form of a flower bed, become a work of art. Vases and pots with plants, installed on the porch or hanging in flower pots, transform the entrance area and make it welcoming.
Many gardeners create their own flower beds in their garden plots. For a flower bed to turn out beautiful, it must be decorated correctly.
Garden flower beds are organized in several ways.
The most common shape of a flower bed is rectangular or round. Bright annual or perennial flowers are often planted here. Such a flower garden stands out against the background of a garden or yard as a bright floral spot. The technique for creating such a flower bed is quite simple. An area of the required size or shape is dug up, the necessary fertilizers are added to it and flowers zoned for this area are planted.
If the composition of the soil is not suitable for the selected flowers, the top layer of soil is removed and replaced with what is needed.
The flowerbed can be designed in the form of a long ribbon composition located along the path, serving as its natural border and background. The labor-intensive process of replacing soil would be inappropriate here. It is worth focusing on varieties and types of plants suitable for the existing soil. This flower garden is called discount.
Recently, an indispensable attribute of a summer cottage has become rockeries. Natural or natural stone is laid out in a certain shape, soil is poured in between the stones and flowers or conifers are planted. This technique creates an artificial relief of rocky terrain (stones are the limiters of the flowerbed). Rockeries are easy to make even for a beginner.
The main condition is the fact that the flowerbed must have a certain shape and sufficient size so as not to look like a pile of stones.
Any ornamental plants that the owners of the dacha like are planted in the rock garden.
Collectors of rare mountain plants often arrange their plantings in the form alpine slide. It differs from rock gardens by bringing the composition of the soil and plant species closer to the natural alpine landscape. To create a rock garden, special rock stones are purchased, and the gaps are filled with fine crushed stone mixed with soil. Flowers or miniature conifers with a root system adapted to such soil are planted in these pockets.
Junipers, Arabis, and ground cover succulents take root well in such flower beds.
The favorite type of flower garden in summer cottages is mixborder(flower garden of different plants). Tall specimens are placed in the background, low ones in the foreground, so that each plant appears in all its glory. According to this principle, front gardens are arranged in traditional styles of site design. Mixborders decorate the entrance area and the surrounding area.
Enthusiasts add color to flower beds using available materials, for example, making a flower bed from tires, an old suitcase or outdated furniture. Mixborders, rockeries are decorated with such unusual flower beds, or they are installed as a separate accent in the garden. These compositions take up little space and can be used for vertical gardening. The support for climbing plants is provided by specially installed tall stumps or picturesque snags. They are treated with antifungal drugs to increase their service life.
Layout
When starting to create a flower bed, you need to have a site plan, because the flower garden will be located in this place for many years. It is necessary to take into account lighting, irrigation methods, the presence of natural topography, soil composition, surrounding vegetation and buildings. Plants are selected based on all of the listed factors. Plants with the same requirements for light, soil acidity and watering regime are planted in one flowerbed.
A drought-resistant plant next to a moisture-loving one will suffer from excess water, its decorativeness will decrease, and the overall appearance of the composition will be affected.
If desired, the choice is made in favor of annual or perennial plantings. Annuals bloom beautifully and vigorously, but require constant care for growing seedlings and annual spring planting. Perennial flowers, ornamental shrubs and conifers are a permanent structure of the flower garden; they maintain the composition throughout the growing season.
Flowers need to be selected according to their flowering time so that the flower bed looks decorative all season long. At the same time, early-flowering bulbous plants are planted, they are replaced by plants of summer flowering periods, then autumn chrysanthemums, dahlias, and gladioli enter.
The layout of a flower garden involves the distribution of selected plants over the area of the flower bed in a certain order. Tall views are placed in the background (the closer to the foreground, the lower the height). The place of each plant is marked on the plan, taking into account its growth: in the first years, empty spaces can be planted with annuals.
Landscape designers advise planting several plants of the same species in a group to create mass in a flower garden.
A single flower will not be able to create a sufficient amount of color in the composition. The repetition effect is often used (the same plants are planted in several places in the flowerbed). When planning, you should take into account the color of foliage and inflorescences: they should be in harmony with each other on a limited plot of land. You can make a monochrome flower bed (for example, white, blue or pink, consisting of flowers of the same color).
How to do it?
Flowerbeds can be simple horizontal, located on the ground or vertical. Vertical decorative flower beds have become quite fashionable in recent years; they are used when space is limited, if you need to decorate a fence or wall of a building.
You can make such flower beds with your own hands. This will take some time, but the result will please you for many years. Designers suggest using all kinds of materials to decorate flower arrangements; most of these materials are available in many households.
From natural materials
The flowerbed may have a smooth transition to the natural turf of the area, or it may be limited by a border:
- A simple border is made from stumps, natural stone, and pebbles. Step by step, this process consists of the following operations: a trench is dug along the contour of the flower bed, then a stone in the form of a wall is laid in this trench to the desired height. If necessary, the walls can be fastened with cement mortar. It’s good if the curb material and the path covering are made in the same style. When finishing, the color of the stones should be taken into account. The rockery looks harmonious with paths made of natural stone.
- Another type of border is finishing with pebbles or round stones. Along the border of the flower bed, formwork of the required height is installed in a trench, reinforced with reinforcement and filled with cement. After drying, the outer side is finished with pebbles, which are placed on cement mortar. The inside is filled with soil, then plants are planted.
- Recently, the installation of gabions for flowerbed borders has become popular.. In this case, a pocket of the required height and width is constructed from a reinforcing lattice; pebbles are poured into this pocket, which is held by the lattice. The fenced part is covered with earth and planted with plants.
- It is enough to simply make a flowerpot from concrete. To do this, you will need two basins of different diameters, wrapped in cellophane (the cellophane layer is needed to better separate the forms). The basins are inserted one into the other, cement mortar is poured between them, after drying the basins are removed, decorating the concrete form as desired. The flowerpot is decorated with stone, mosaic, shells, sand, and painted with oil paints.
Natural wood
If the area is not full of stones, but there are forests around, it is better to use wood cuts. To create such a flower bed, wood is removed from the middle of the stump, the cavity is filled with soil mixture and the plants are planted. Stumps are installed in groups or individually to decorate the garden. Perhaps there is already a stump from a cut down tree on the property, but you don’t get around to uprooting it. It is worth hollowing out the middle of the stump and making a small flower bed in it.
In a few years, the stump will rot on its own from moisture and soil, but for a few years it will be the original decoration of the site.
An old log or log can easily be turned into a fantasy flowerbed by scraping out the top. You will get a rectangular cavity suitable for growing flowers. Hemp is also useful for creating high decorative beds. In terms of aesthetics, such beds will replace a flower bed and at the same time become a source of beauty and benefit.
Various driftwood can be used as material for arranging a flower garden: their service life is limited by the lifespan of the wood.
A wattle of thin branches or vines will be an excellent decorative decoration for a flower bed. You can diversify your winter pastime with fascinating weaving of wattle fence for the border, and in the spring all that remains is to strengthen the finished borders on the supports. The inside must be lined with film or other durable material to prevent soil from spilling into the cracks. A layer of drainage (broken gravel, expanded clay or sand) is poured onto the bottom. The rest of the volume is filled with earth. Even vegetables are placed in such flower beds.
Fences for flower beds or garden beds are made from brightly colored boards. The shape and color can be any (whatever you like and suit the composition). Inside, it is worth insulating the sides from moisture, attaching a film to them, and pouring drainage and soil into the rest of the space. The shape of a flower bed can become a source of inspiration and an exclusive decoration of the site.
A flower bed in a flowerbed in the form of a decorative well will attract special attention from guests and will appeal to members of the household.
Wood is a universal material. All its parts are used. Don't forget about the rate at which wood rots. To extend the service life of wood products, the structure must be impregnated with antiseptics and coated with oil compounds (paint, oil, wax).
On a metal frame
Professional topiary art has given flower growers a lot of ideas for arranging flower beds. These include vertical beds and flower beds on a metal frame.
To perform such a miracle, you need to install a pole made of a metal mesh frame, line it from the inside with black non-woven material or black thick film, then fill it with soil, and install a pipe with holes for irrigation in the center. Cuts are made outside and plants are planted. Over time, the foliage and flowers close together and form a vertical flowering column. This method is one of the most difficult to perform and maintain: flowers are difficult to replace and water.
Remains after renovation
In most cases, after renovating a home, there is a bunch of scraps of linoleum, remnants of slate, bricks, pipe scraps, pallets from building materials, and packing boxes. You can take all this to a landfill, but it is better to use it as improvised material for erecting flower beds.
Brick paths combine beautifully with flower beds framed by borders made of the same brick. Such borders are laid in trenches along the contour of the flower bed: the foundation is poured into the formwork and several rows of bricks are laid on the mortar. You can make a multi-level bed from this material: the play of relief will add decorativeness to the composition.
A round flower bed around a garden tree will make watering and fertilizing convenient; it will add an aesthetic decorative effect to garden plantings. You can grow flowers and garden strawberries in tree-trunk beds: they are decorative and have tasty berries.
The border of the flower bed is made from plastic and glass bottles. One can argue about the artistic value of this material, but with proper execution, interesting compositions are obtained.
Ceramic tile scraps should be used to decorate the surfaces of paths and flowerbed edges. The base can be made of concrete and decorated with a mosaic of fragments. You can also use crockery shards. If desired, mosaic pieces are painted in various bright colors with exterior paint and pasted over the outside of the ridge.
Metal objects (for example, old wheel rims) are used as containers for planting flowers.
Flowerbed design made from old tires is no less popular than brick decoration. This material has become traditional: it is accessible and relatively easy to process. The tire is filled with soil and plants are planted; the rubber surface itself is painted in a bright color or painted with patterns. Such flower beds can be placed in different corners of the site or grouped into a beautiful composition.
From tire scraps you can make a swan or a donkey, or build a real art group in the garden. Flowerbeds made from car tires with a shaped edge have a more complex arrangement.
An unsightly building or a monotonous fence is decorated with vertical flower beds made of wooden boxes in which pots of flowers are placed. Before this, the bottom and sides of the required height are laid out from linoleum scraps. Then add drainage and soil and place the plants you like. This type of decor looks colorful during the flowering period of plants.
Hanging beds and flower beds made from scraps of pipes or gutters have gained popularity. To do this, the pipe is cut lengthwise into two halves. Each half is independently fixed to the wall or a suspended structure is created on cables from several parallel drains. Flowers or vegetables are planted in these unique pots.
Vertical flower beds anywhere on the site can be organized from construction pallets. Original flower beds will become a bright decoration of the site. However, to maintain their decorative appearance, such flower beds require regular watering and timely replacement of faded specimens. In winter, these plants need to be moved to heated rooms or limited to growing annuals.
Plumbing and dishes
After the renovation, the old plumbing remains. It can also be given a second life in the garden. For example, an old bathtub can be coated on the outside with waterproof paint. A layer of drainage must be placed at the bottom. The rest of the container is filled with soil mixture.
Such a flowerbed has sufficient depth for planting any plants that have a one-year flowering period.
The composition of climbing plants and vines looks incredibly beautiful. Broken pots and old basins should be decorated, filled with soil and a flower arrangement planted in them. Human imagination is limitless: amazing household items are used in garden design.
A set of plumbing fixtures, covered with gold paint and decorated with thujas, becomes a work of art (a little ironic, but original). It is worthwhile to paint old rusty barrels beautifully and humorously and plant flowers or vegetables in them so that they please the eye and lift your spirits.
Other popular means
Old furniture has become no less popular for setting up flower beds. For a successful composition, you should look for ideas from professional designers and correctly copy them on your site. Otherwise, you may end up with a warehouse of old furniture in different parts of the garden.
The technologies for converting an old sideboard into a flower garden are as follows:
- we paint the old cabinet in a bright color;
- we use drawers as mini-flower beds;
- We install this buffet-flower bed in a suitable place in the garden or yard.
