Instructions for installing an asymmetrical bathtub bass allegro. All the secrets of installing a screen on an acrylic bathtub. Features of installation on rectangular corner models Installing a bath screen bass allegro

Instructions for installing an asymmetrical bathtub bass allegro. All the secrets of installing a screen on an acrylic bathtub. Features of installation on rectangular corner models Installing a bath screen bass allegro
12.03.2020

Corner asymmetrical acrylic bathtubs

Buying the most popular models of Erlit shower cabins has become even more profitable!

Pages: 1 2

Corner asymmetrical bathtubs

When choosing a bath, you need to pay attention to the size of your bath. If the bathroom is not very large or you just want it to be more spacious, then the best option for you is a corner bath. After all, it allows you to save space, unlike rectangular analogues. Moreover, its dimensions (150 cm and more) make it possible to feel quite comfortable in it.

Corner asymmetrical acrylic bathtubs

We hasten to please you that it has become even more profitable to buy the most popular models of Erlit shower cabins!

Hurry - the promotion is valid until the booths and gifts in stock last!

Pages: 1 2

Corner asymmetrical bathtubs

In addition to the standard rectangular bathtub. Plumbing manufacturers can also offer you asymmetrical bathtubs. Corner baths have become the most popular. which you can install in the corner of the bathroom.

When choosing a bathtub, you need to pay attention to the size of your bathtub; installation of wall panels instructions. If the bathroom is not very large or you just want it to be more spacious, then the best option for you is a corner bath. After all, it allows you to save space, unlike rectangular analogues. Moreover, its dimensions (150 cm and more) make it possible to feel quite comfortable in it.

But this is not the main advantage of a corner bath. It will decorate your bathroom and make it special and individual. You will be able to choose a bath. both right-handed and left-handed. This also allows you to choose a model that suits you, both externally and functionally.

Bathroom sizes may vary. We also offer you additional equipment for them in the form of handles, curtain rods, headrests, and lighting. This is all created for your convenience. Here you can also choose a hydromassage system for your new bathtub.

A corner bathtub will allow you not only to decorate your bathroom with such an interior element, but also to experience all its amenities for yourself.

Acrylic bathtubs Bass – accessible functionality

Acrylic bathtub Riola

The well-known company Bas has gained wide popularity thanks to the use of two modern technologies for reinforcing bathtub surfaces. The first option is based on reinforcing the Bass bath using polyester resin with special glass fiber. The second technology involves the use of absolutely safe, environmentally friendly, high-density two-component polyurethane foam.

Modern baths

Currently, the company's full model range is represented by:

Bass acrylic bathtubs;

curtains for them;

showers;

special shower enclosures.

30 modern models of Bas bathtubs have classic rectangular, asymmetrical and symmetrical shapes for removing whitewash from the ceiling. All products are manufactured in strict accordance with advanced Italian and American technologies using original equipment.

Any Bass bathtub is molded using special vacuum forming machines produced by the famous Italian company SELF. When operating such equipment, infrared heating of certain areas is used. This method allows you to bend the base sheet into any desired shape.

Popular Bass models

At the moment, the Bass acrylic bathtub is the best option in terms of price and durability for many citizens of our country, cracked bathtub enamel. The most famous models are all corner baths, with an elaborate curved shape that saves space and improves the appearance of the room.

How to choose an acrylic bathtub? Let’s take a closer look at three unique models that will satisfy any requirements of the most demanding users:

Bass bathtub Laguna - the maximum volume of water up to the protective drain hole at the top is 295 liters. The depth of the side asymmetric model in the center is 44 cm, and the height of the screen itself is 55 cm. The electrical characteristics of this bath are V - 220/240. Electrical wiring for powering electronic elements is carried out using an RCD. The standard package includes:

metal carcass;

front panel;

convenient removable legs for installing a bathtub and a drainage device.

Additionally, this model is equipped with: a cascade, safety handles, special nozzles for a relaxing massage of the back and legs, a headrest, lighting and a pillow for the switch button.

Corner bathtub model Bass

Bathtub Bas Alegra – this model has a smaller volume. A total of 220 liters. But it fits perfectly into small bathrooms in Khrushchev-era buildings. The maximum depth in the center is 45 cm, and the height of the screen is 56 cm. The classic equipment is the same as the previous model, and there are the same additions to it: headrest, handles, nozzles, cascade, button pad and backlight. This bathtub is very practical and easy to use, popular with young couples who have no difficulty in climbing over a fairly high side. Low price goes well with high functionality. This is the brainchild of Bas - a new generation acrylic bathtub with a comfortable corner seat made of durable materials.

Bass Nicole acrylic bathtub is a fairly large bathtub. Apart from the shape and volume, this model is no different from the previous one. The maximum volume is 290 liters. It is easy to install in the space between two walls or in a small niche, which are still found in former communal apartments. This is possible thanks to two straight sides on both sides of the product. The stock has a rectangular shape, slightly elongated on one side. If necessary, this bathtub can be equipped with a vertical stand for hydromassage and a special original curtain for this model.

Another corner bath

Please note: power supply to all models is carried out through an RCD, so it is imperative to ground this device. Otherwise, using such a bath will be unsafe for humans.

Advantages of acrylic bathtubs

Recently, Bass baths have become increasingly popular, but what are the main advantages of such devices?

Users and plumbing accessories installers note a number of advantages of such bathtubs.

Unlike steel and cast iron counterparts, acrylic Bass bathtubs are lightweight and have very high strength, which was not available to non-metallic products for a long time.

Even when not filled with boiling water, they have a temperature that is pleasant for humans and do not allow the collected water to cool for a long time. This property is achieved through the use of acrylic, which has very low thermal conductivity. On average, in 30 minutes the water will cool down by only one degree Celsius.

All such bathtub models have ergonomic shapes, specially created to fit the curves of the human body.

The acrylic surface is highly resistant to various mechanical damage: chips, deformations and scratches.

Acrylic is able to retain its original shine for many years and does not turn yellow, as happens with enamel analogues. In addition, they practically do not slip, which makes their use safer for children and the elderly.

The surface of such baths is covered with a special antibacterial layer, which prevents the development of various diseases and fungal deposits.

The water draws quietly enough, which allows you to take a bath even at night, without fear of disturbing your family and neighbors.

Rectangular bathtub model

Advice: if you want to install a bathtub model with a hydromassage function, then first think about where it is best to place additional equipment.

Conclusion

The high environmental friendliness and ergonomics of all models allows you to install and use these devices for convenient bathing of babies and small children. They are easy to fit into any interior, thanks to the variety of shapes and convenient installation method. The only thing you should not forget about is the mandatory grounding of such baths. Don't be lazy and risk your health by relying on luck.

Installation instructions for an asymmetrical bathtub bass allegro

Modern bathtubs are sophisticated plumbing fixtures designed to relax and unwind, to decorate the bathroom and lift the mood with just their appearance. The Russian company BAS manufactures its products using modern Italian equipment from imported acrylic sheets, with mixers, nozzles, shower tubes from famous European brands.

It turns out that acrylic bathtubs “BAS” are made entirely from imported components, but they are shaped at a factory in Russia.

The central office of the BAS company is located in the capital; there are also representative offices and warehouses in Yekaterinburg and Novosibirsk. The company produces acrylic hydromassage bathtubs, shower cabins and corners, bath headrests, and other bathroom accessories. These products are represented by dozens of dealers in different CIS countries and beyond.

Most often, “BAS” acrylic bathtubs are installed not based on compliance with any requirements for functionality or appearance, but based on the available space in the room. For ease of selection of sizes, more than two dozen models have been developed: rectangular, corner bathtubs with a semicircular or flat front panel.

The corner semicircular bathtub “Alegra” has dimensions of 150x90 cm and a height of 52 cm. It is installed on a metal frame and is equipped with 6 hydromassage nozzles. Slightly smaller in size, but the same in size as the bathing bowl itself, the Verona bathtub is a manual wood milling machine video. In size (150x70 cm), it fits perfectly into the place of old cast-iron bathtubs that have already served their purpose. This model is also equipped with a drain-overflow system and has a bottom design that dampens noise and vibration from water falling on it.

The Imperial bathtub can accommodate 2 people, despite the fact that it measures only 150x150 cm and has a standard depth of 47 cm. The model is also equipped with 6 hydromassage jets. They are located in such a way that a person, leaning on any of the three back ridges, receives a pleasant hydromassage with jets of water and air. The corner model “Iris” has a similar design, only it is equipped with 9 nozzles, which increases the capabilities and intensity of hydromassage. The Laguna bathtub also has 9 jets, but it is designed for installation dimensions of 170x110 cm. There is a clearly designated seating area if you are not taking a bath, but just taking a shower.

To avoid water splashing all over the room, BAS bath curtains are installed, which are plastic enclosures. They can be moved and closed if necessary. On the front arch of almost all models there is a protrusion for mounting such curtains.

Corner models, such as “Vectra”, “Sagra”, “Florida”, are manufactured in both left and right versions, so as not to interfere with the owners’ plans for arranging the interior of the rest of the bathroom. Hydromassage in rectangular bathtubs, like Jamaica, Malta or Atlanta, are no less relaxing, but have a simpler design.

Baths, showers and Jacuzzis BAS (BAS), as well as:

Installation instructions for an asymmetrical bathtub bass allegro 2014-12-11T18:58:08+03:00 admin Articles Acrylic bathtubs, asymmetrical acrylic, asymmetrical acrylic bathtubs, asymmetrical bathtubs, corner asymmetrical

Contents Corner asymmetrical acrylic bathtubs Corner asymmetrical acrylic bathtubs Acrylic bathtubs Bass - accessible functionality Instructions for installing an asymmetrical bathtub Bass Allegro Corner asymmetrical acrylic bathtubs Corner asymmetrical acrylic bathtubs Buying the most popular models of Erlit shower cabins has become even more profitable! Hurry - the promotion is valid until the end of booths and gifts in stock! Pages: 1 2 Corner...

Subscriber Construction blog

First of all, of course, a few words should be said about the company that produces acrylic bathtubs BAS. This company continues to surprise its consumers and partners, proving that bathtubs produced in Russia are no worse than their foreign counterparts.

The main products of this company are hydro and air massage acrylic bathtubs. Among the obvious positive aspects of acrylic bathtubs produced by BAS are the following:

  • acrylic bathtubs from bas are manufactured using multilayer polymer plastic from the company senoplast - the combination of acrylic and ABS plastic gives the bathtub strength and reliability;
  • the same plastic from senoplast also has an antibacterial effect, which protects the bathtub from the proliferation of various bacteria
  • Bathtubs from bas are manufactured using high-quality Italian equipment, so the products can compete with European products
  • acrylic bathtubs are reinforced with a steel frame, which is well protected from water
  • the products are manufactured in Russia and therefore their features take into account the design of Russian bathrooms

Buyers about BAS bathtubs

I wonder what the buyers themselves say about acrylic bathtubs; reviews are quite easy to find on the Internet. It turns out that the majority of customers were very satisfied, saying that the acrylic bathtub from bas works great. Buyers happily share their impressions that the bathtub of this company:

  • does not scratch, despite the fact that the shower periodically falls into it
  • The side is very thick and you can sit on it
  • the bath retains heat well, and therefore you can bathe in it for a long time, even if there is limited hot water
  • The bathtub is equipped with excellent comfortable armrests
  • takes up little space, all models are well thought out
  • the only part that earned several negative reviews was the hydro and air massage system - they say that it does not last very long, and repairs are quite expensive

Another interesting point was that many buyers installed and assembled both an acrylic bathtub and a bathroom curtain on their own. Of course, not everyone can do this, but we can still assume that this indicates the quality of the product, since even an unprofessional assembler will do everything efficiently. However, the installation of an acrylic bathtub bas can be done by professionals - it all depends on the client’s capabilities. The instructions that come with the bathtub are quite clear and simple, so assembling the bas acrylic bathtub is not difficult.

Three great examples of BAS products: Atlanta, Florida and Laguna

One great example is the acrylic bathtub bas atlanta, which has certain advantages. So, the dimensions of this bathtub model are quite modest, it is suitable even for a small bathroom - 170 by 70 cm. However, the capacity is very good - 205 liters. Since BAS baths are mainly hydromassage, Atlanta is no exception - it is equipped with six nozzles - three on each side.

The required kit includes a standard set:

  • metal frame that guarantees the strength of the bath
  • legs under the bathtub, which allow you to adjust the height of the bathtub and ensure its stability
  • a front panel that will cover the space under the bathroom and give the interior a complete look
  • necessary device for draining and overflowing

In terms of design and space optimization, this is a very simple, medium-sized rectangular bathtub that is quite comfortable, but does not take up too much space or distract too much attention, so it will easily fit into almost any modern design.

Another example of an excellent bathtub is an acrylic bathtub - this is a corner asymmetrical bathtub. It is quite compact in itself - length 160 cm and width 88 cm, and at the same time it also has a beveled corner, so it will be an ideal option for a small room. Although her style is quite simple and elegant, if desired, you can highlight her - for example, create a visually separate space for her, using decorative elements, finishing with tiles of a different color or shade, additional shelves, etc. In addition to its ergonomic design, this bathtub also has an interesting shelf for hygiene items, or even to sit on.

The equipment here is standard - the same as in Atlanta. The capacity is also 205 liters. But there are more hydromassage jets - there are eight of them.

The last one to consider, of course, is a model such as an acrylic bathtub bas lagoon, which is somewhat similar to the Florida model. However, Laguna is larger in size - 170 by 110 cm. The capacity is also much larger - 295 liters. And the number of hydromassage nozzles is the same - eight pieces. The equipment is standard.

This bathtub is suitable for a medium-sized room, due to the fact that although it is asymmetrical, it is still quite large and is unlikely to fit well in a small room. This model is also very conveniently equipped with a shelf for bathroom accessories and has an ergonomic design. At the same time, it will most likely be one of the main elements in the design of the room, this is facilitated by its rather large size. Therefore, you can highlight it with directional colored lighting or other decorative options. Also, a great idea would be to hang a large mirror next to the bathtub so that it expands the space and the bathtub no longer seems bulky.

In addition to the standard equipment, BAS offers its customers a fairly large selection of additional options. These additional features can be divided into several groups:

  1. Aero and hydromassage lotions: various types of massage - back, shiatsu, foot; aeromassage from 6 to 12 nozzles, hydro-aero-pipe massage.
  2. Faucets: cascade mixer or even the whole set: spout, mixer, shower holder.
  3. Illumination: various types of illumination and chromotherapy.
  4. Pleasant little things: headrest, armrests, cleaning products for the massage system or the bath itself, a pillow for the on and off buttons.

The BAS company provides its customers with really wide possibilities in choosing a model and a set of bathtub configurations, plus you can choose a design curtain.

REQUIREMENTS FOR THE BATH INSTALLATION LOCATION

Installation of the bathtub should be carried out only by qualified specialists, in compliance with the following requirements:

    Installation of a bathtub without a frame, as well as with a modified frame, is not allowed. The legs are used to level the bathtub and adjust the gap between the bathtub panel and the floor. The bathtub must rest on all support points to prevent uneven distribution of the load and, as a result, the appearance of microcracks in the bathtub body;

    It is not allowed to embed the bathtub in tiles, panels or hard mortars. To avoid moisture getting under the bathtub or on the hydromassage equipment, the seams between the bathtub and the wall must be sealed with plumbing silicone.

    Avoid getting dirt and construction dust on the surface of the bathtub. This can cause clogging and failure of the hydromassage equipment or lead to scratches on the surface of the bathtub during subsequent unprofessional cleaning.

    When carrying out work on the removal of water supply and sewerage pipes, it is necessary to take into account the linear dimensions of the bathtub. Otherwise, the connection may be difficult, since the pipe outlets may rest against the stiffeners, units and fittings of the bathtub, and the bathtub cannot be installed close to the walls. Structural changes in the arrangement of equipment and pipelines of the bath, cutting of mounting clamps, and so on are strictly prohibited.

    The electrical wiring of the room must have an individual differential switch 30mA, magnetothermo 2.4-4A or another common connection (CEI-64-8) and installed in the common switchboard of the room. It is strictly forbidden to install this switch under the bathtub!

  1. Before starting work, it is necessary to check the completeness of the product, cocoa, and screen.

ATTENTION! Failure to comply or not to fully comply with the above requirements does not provide for the preservation of warranty conditions for service or repair for such a bathtub.

BATH INSTALLATION

Install the bathtub on the legs (Fig. 1). The manufacturing company allows the legs to be equipped with an M12 bolt, instead of the corresponding threaded rods. Legs of configuration A (Fig. 1) (2 pcs.) - installed on the front (front) side of the bathtub, along the edges, left and right (for the RIVIERA bathtub - 4 pcs., all in front). Legs of configuration B (Fig. 1) - other remaining front and rear legs. The legs are connected to the frame using the upper pair of M12 nuts, which also serve to adjust the height of the bathtub. Install a drain-overflow device on the bathtub (Fig. 2), a siphon (may not be included in the kit), and adjust the bathtub in height. The distance from the floor level to the bottom point of the siphon must be at least 15 mm. Make sure that the bathtub is adjusted and rests on all points of support. Install the panel onto the bathtub by snapping it onto the upper fasteners (Fig. 6 and 7). On some models of symmetrical and asymmetrical “BAS” bathtubs, it is possible to trim the panels to length (no more than 2 cm per side). In addition, if you plan to install a side panel on your bathtub, then first install the top fasteners under it that come with the side panel. Adjust the verticality of the panel. The bottom of the panel should be adjacent to the plane of the corner corner installed on the outer legs. The seating depth of the angle is adjusted by the lower pair of M12 nuts. The corners should be equally adjusted in height and be symmetrical relative to the panel. Using a drill with a diameter of 3.5 mm (the size indicated for a self-tapping screw is 4.2x25 mm), drill through holes in the lower corners and panels (Fig. 4 and 5). Remove the panel from the bathtub and connect it to the sewerage and water supply systems (see Connecting the bathtub to the water supply and sewerage network), as well as to the 220 V electrical network (see Connecting the bathtub to the electrical network). After this, carefully move the bathtub tightly against the wall, and once again make sure that it is stable at all points of support, and all connections are made correctly. Place the panel on the bathtub and fix its bottom into the drilled holes with a self-tapping screw and a press washer (Fig. 8).
Close the head of the screw with a decorative plug (Fig. 9).

ATTENTION! TO AVOID MOISTURE GETTING BEHIND THE BATH, MUST TREAT THE SEAM WITH PLUMBING SILICONE AROUND THE ENTIRE PERIMETER OF THE BATH!

CONNECTING THE BATHROOM TO THE WATER SUPPLY AND SEWERAGE NETWORK

The connection of the bathtub to the water supply and sewerage network must be carried out by a qualified plumber. The bathtub kit includes a semi-automatic drainage device, which, after installing it on the bathtub, is permanently connected to the sewer network through a flexible corrugated or rigid PVC pipe (not included in the kit). A sewer drain with a diameter of 40-50 mm is installed at the bathtub installation site in the floor or wall, taking into account the linear dimensions of the bathtub. When the drain pipe is located in the wall, the optimal height is considered to be no more than 2 cm from the floor level to the bottom edge of the pipe. Connecting the bathtub to the water supply network if it is equipped with a mortise mixer. The network pressure should be 3-5 atm. At pressures above 5 atm, pressure reducers should be installed and adjusted to the specified standards.

Places for connection to the water supply system must be placed taking into account the linear dimensions of the bathtub and its units and equipped with taps disconnecting from the main line. Connection to the system is made through a flexible plumbing connection (water hoses). The length of the hoses must allow the bath to be moved from the walls and a distance of at least 0.5 m. It is recommended to use water purification filters. The absence of filters can lead to clogging of hydromassage nozzles and metal scale entering the ceramic mixer cartridge, which will lead to their failure.

Even the most stylish bathroom interior will look ridiculous if the space under the plumbing fixture is not covered. You can decorate it using different methods, but installing a screen is considered the best and most reliable. With it, you can not only improve the room, but also create a comfortable work area, hidden from prying eyes. Under such panels in the free space you can place household chemicals, small buckets and other things.

What are they?

Modern manufacturers offer a wide range of products to suit every taste.

There are different types of protective panels:

  • deaf;
  • with sliding doors;
  • with accordion doors;
  • with hinged doors;
  • with shelves.
  • with fabric curtain.

Which option to choose is up to each person to decide for himself. If you want to save free space, you should choose the option with accordion doors, which fit best into small spaces. For a comfortable location of household chemicals under the bathtub, it is better to choose a product with shelves. But blank panels are distinguished by their aesthetics. They are very simply attached to the frame, but their installation limits access to plumbing, since not all models can be easily and quickly removed.

Find a full overview of all screens in our special article.

The most popular options among users of acrylic bathtubs are:

  1. front panel.
  2. continuous screen made of ceramic tiles;
  3. sliding

In our article we will take a closer look at installing an acrylic panel, because consumers most often prefer this method of decorating the space under the bathroom.

Detailed information about installation of tile screen And sliding panels see relevant articles

Photo

The photo below shows various interesting options for decorating the space under the bathroom.

How to choose the right size?

Any bath panel is selected for a specific size. It is very important to check whether it fits your plumbing model. The length of acrylic panels varies from 120 to 180 cm for standard hot tubs. And the height is 55-60 cm, but it can change if there are legs.

Most often, acrylic panels come complete with plumbing fixtures and have the same tone as the bathtub, which allows the overall design to look organic. They are made of plastic coated with an acrylic layer.

The advantages of panels purchased complete with a bathtub include the fact that they fit as tightly as possible to the sides of the bathtub, eliminating unsightly gaps. Experts do not recommend purchasing such screens separately, since they do not always fit exactly in size.

If the screen is purchased separately from the bathroom, then in order not to make a mistake with the choice of size, you should carefully measure the plumbing from all sides.

Front panel installation

We have made our choice and now we can begin installation.

It should be immediately noted that standard screens are sold complete with all fasteners, frames and fittings. They also come with detailed step-by-step installation instructions.

To install the protective screen, you will need the following tools and materials:

  • roulette;
  • marker or pencil;
  • building level;
  • screwdriver;
  • wrench;
  • silicone sealant.

How to assemble and secure the screen? Let's look at the step-by-step installation instructions for Triton brand bathtubs:

STEP 1. Adjusting the height of the bath. In order to avoid a wide gap near the floor, you need to match the height of the font and the front panel. We measure it with a tape measure and, using a wrench, tighten the legs.

It is very important to check the level after all manipulations. Don't forget to do this.

STEP 2. Marking. Now you need to find plastic plugs on the frame or legs to which the screen will be attached, and mark on it with a marker the places for screwing in the screws, according to the location of the plugs.

STEP 3. Fastening. We apply the screen and, using a screwdriver, fasten it to the frame with self-tapping screws. Then we install special plugs on the screws.

It is best to seal the joint between the screen and the tile with silicone sealant to prevent splashes from getting in and causing mold to grow.

How to install on corner models?

For corner bathtubs, mounting is most often provided not with self-tapping screws, but with special magnets and metal plates. Such magnets are initially attached to the legs of the font.

STEP 1. Height adjustment. Just as in the case of the rectangular model, we adjust the height of the legs based on the screen parameters.

STEP 2. How to attach the plates? On the back side of the panel, in the places where the magnets will rest, we glue the metal plates from the kit with double-sided tape or silicone sealant. While drying, you can secure them with regular tape.

STEP 3. Installation. We apply the front panel and check that the magnets grab the metal plates.

This installation option is convenient because the question of how to remove the screen and then put it back on does not arise. Everything is extremely simple, you need to apply a little force by pulling the panel towards you, and you can just as easily return it to its place. The previous method is no different from this simplicity; there you will first need to unscrew the screws.

Conclusion

In conclusion, it is worth noting that installing a screen on an acrylic bathtub has many advantages. With it you will transform the interior of the room and create additional space for storing household chemicals. To make your bathroom more functional and aesthetically pleasing, you should take a responsible approach to choosing a screen and carefully consider how best to attach it.

All photos from the article

Acrylic bathtub Riola

The well-known company Bas has gained wide popularity thanks to the use of two modern technologies for reinforcing bathtub surfaces. The first option is based on reinforcing the Bass bath using polyester resin with special glass fiber. The second technology involves the use of absolutely safe, environmentally friendly, high-density two-component polyurethane foam.

Modern baths

Currently, the company's full model range is represented by:

  • Bass acrylic bathtubs;
  • curtains for them;
  • showers;
  • special shower enclosures.

30 modern models Bas bathtubs have classic rectangular, asymmetrical and symmetrical shapes. All products are manufactured in strict accordance with advanced Italian and American technologies using original equipment.

Any Bass bathtub is molded using special vacuum forming machines produced by the famous Italian company SELF. When operating such equipment, infrared heating of certain areas is used. This method allows you to bend the base sheet into any desired shape.

Bath Fantasy

Popular Bass models

At the moment, the Bass acrylic bathtub is the best option in terms of price and durability for many citizens of our country. The most famous models are all corner baths, with an elaborate curved shape that saves space and improves the appearance of the room.

How to choose an acrylic bathtub? Let’s take a closer look at three unique models that will satisfy any requirements of the most demanding users:

  1. Bass bathtub Laguna - the maximum volume of water up to the protective drain hole at the top is 295 liters. The depth of the side asymmetric model in the center is 44 cm, and the height of the screen itself is 55 cm. The electrical characteristics of this bath are V - 220/240. Electrical wiring for powering electronic elements is carried out using an RCD. The standard package includes:
  • metal carcass;
  • front panel;
  • convenient removable legs for installing a bathtub and a drainage device.

Additionally, this model is equipped with: a cascade, safety handles, special nozzles for a relaxing massage of the back and legs, a headrest, lighting and a pillow for the switch button.

Corner bathtub model Bass

  1. Bathtub Bas Alegra – this model has a smaller volume. A total of 220 liters. But it fits perfectly into small bathrooms in Khrushchev-era buildings. The maximum depth in the center is 45 cm, and the height of the screen is 56 cm. The classic equipment is the same as the previous model, and there are the same additions to it: headrest, handles, nozzles, cascade, button pad and backlight. This bathtub is very practical and easy to use, popular with young couples who have no difficulty in climbing over a fairly high side. Low price goes well with high functionality. This is the brainchild of Bas - a new generation acrylic bathtub with a comfortable corner seat made of durable materials.
  2. Bass Nicole acrylic bathtub is a fairly large bathtub. Apart from the shape and volume, this model is no different from the previous one. The maximum volume is 290 liters. It is easy to install in the space between two walls or in a small niche, which are still found in former communal apartments. This is possible thanks to two straight sides on both sides of the product. The stock has a rectangular shape, slightly elongated on one side. If necessary, this bathtub can be equipped with a vertical stand for hydromassage and a special original curtain for this model.

Bathtub with two vertical walls on each side

Please note: power supply to all models is carried out through an RCD, so it is imperative to ground this device. Otherwise, using such a bath will be unsafe for humans.

Advantages of acrylic bathtubs

Recently, Bass baths have become increasingly popular, but what are the main advantages of such devices?

Users and plumbing accessories installers note a number of advantages of such bathtubs.

  1. Unlike steel and cast iron counterparts, acrylic Bass bathtubs are lightweight and have very high strength, which was not available to non-metallic products for a long time.
  2. Even when not filled with boiling water, they have a temperature that is pleasant for humans and do not allow the collected water to cool for a long time. This property is achieved through the use of acrylic, which has very low thermal conductivity. On average, in 30 minutes the water will cool down by only one degree Celsius.
  3. All such bathtub models have ergonomic shapes, specially created to fit the curves of the human body.
  4. The acrylic surface is highly resistant to various mechanical damage: chips, deformations and scratches.
  5. Acrylic is able to retain its original shine for many years and does not turn yellow, as happens with enamel analogues. In addition, they practically do not slip, which makes their use safer for children and the elderly.
  6. The surface of such baths is covered with a special antibacterial layer, which prevents the development of various diseases and fungal deposits.
  7. The water draws quietly enough, which allows you to take a bath even at night, without fear of disturbing your family and neighbors.

Rectangular bathtub model

Advice: if you want to install a bathtub model with a hydromassage function, then first think about where it is best to place additional equipment.

Conclusion

If you decide to use Bas company products, acrylic bathtubs will be purchased at the most reasonable price. And the number of different additional functions will turn ordinary hygienic bathing into a real spa procedure.

The high environmental friendliness and ergonomics of all models allows you to install and use these devices for convenient bathing of babies and small children. They are easy to fit into any interior, thanks to the variety of shapes and convenient installation method. The only thing you should not forget about is the mandatory grounding of such baths. Don't be lazy and risk your health by relying on luck.

Gallery