Immobilizers i95 LUX, i95, i95 ECO. Reliable immobilizer StarLine i95 Modifications Starline i95

The Starline i95 immobilizer is a car engine blocker designed to prevent car theft. Starline's assortment includes several immo models; let's take a closer look at the capabilities of the i95 blocker.

[Hide]

Description and principle of operation

Using a car lock allows you to ensure reliable protection cars from theft. This is achieved thanks to the device’s ability to identify the car owner through wireless technologies, with the help of which it is ensured additional protection ICE. Identification of the owner of the blocker is carried out by identifying a tag that may be in the car owner’s pocket. When a radio tag appears within the range of the transceiver, the immo key automatically exchanges signals with the processing unit.

The procedure for blocking the internal combustion engine is carried out when you start driving with the engine running or the ignition on. If there is no radio tag in the transceiver coverage area and the engine is running, the lock will not turn on if the car is not moving. Thanks to this feature, the consumer can use the blocker to collaboration With various systems remote motor start.

An overview of the device's features is presented by the AvtoPulse channel.

When the processor module detects a tag within the range after ignition activation, the device emits a short beep. If the radio tag is not synchronized with the unit before the start of movement, then alarm pulses will be triggered, indicating that the internal combustion engine will soon be blocked. The motor lock is activated for twenty seconds, and if the car starts to move after the end of the first cycle, it will be activated again.

Every time you try to start the internal combustion engine and start moving, the power unit will be blocked. After the third blocking cycle, the engine cannot be unlocked without the immobilizer tag.

If the consumer has configured an intermittent blocking algorithm, the immobilizer will begin the procedure of simulating problems with the internal combustion engine. The electrical circuit blocked by the device will periodically break and be restored according to a certain algorithm.

Key Features

Features of Starline i95 immobilizer:

1. Ability to control hood and door locks.
2. Packet data transmission is carried out at a frequency of 2.4 GHz. To protect the channel it is used special system encoding to prevent hacking and ensure high security.
3. Protection from robbery. If a car is attacked and the car owner is kicked out of the car, the car’s engine will be blocked when the criminal moves away from the car owner as much as possible. Before blocking the engine, the immo will wait until the car's speed is reduced to 30 km/h or lower. This is achieved thanks to the built-in speed sensor. Moreover, other drivers will be warned about braking by automatically activating the brake lights.

The Miracle of Hostile Technology channel talked about the features of Starline i95 immobilizers.

StarLine i95 immobilizer versions and their technical characteristics

Users have a choice of two device models - Lux and Eco.

Lux

The Lux model is a more advanced version of the i95 blocker. The locking and unlocking procedure is carried out using tags, and there is a Hands Free mode. To activate the option, the driver must appear in the tag’s coverage area. The manufacturer has set up several recognition modes - within a radius of 0.5-1.5 meters, 3-4 meters, and also when the car owner is 15-17 meters from the car.

The main feature of the model is the presence of a remote control keychain equipped with a key and a diode indicator. This device is installed on the instrument panel and is used for emergency password entry.

ECO

This model is considered one of the most affordable. Starline Eco belongs to the category of contactless blockers that allow you to detect a tag in the car owner’s pocket from a distance. If the owner is successfully identified, the immo will unlock the hood lock when it is installed ( we're talking about about electromechanical devices).

Unlike the Starline immobilizer model described above, Eco does not have the Hands Free function, and the package does not include an additional display unit.

Photo gallery

Starline i95 Lux Blocker Starline i95 Eco

Appearance and equipment

Engine blocker kit:

• two radio tags with power supplies and batteries;
• a special card with a password for emergency unlocking of the internal combustion engine;
• device display block;
• built-in motion controller;
• engine blocking module;
• manual for using the device;
• brief consumer reminder;
• warranty card.

The processor module is housed in a small, water-resistant housing with a built-in blocking relay. This unit is equipped with a motion controller and a power sensor for the hood locking device. The module is made in the form of a monoblock. The display unit is a small-sized device designed to warn the car owner with light signals and sounds.

RFID tags are enclosed in a waterproof glossy housing and are characterized by: small in size, thanks to which they can be hidden even in a wallet. The main feature of tags is reduced energy consumption, which is due to the use of new technologies. This allows you to increase the service life of the batteries. Over time, the mirror effect of the body disappears. Because of this, scratches and damage appear on it. There is a key on the tag body that can be used to control the blocker settings. Using this button, the immobilizer is switched to service mode.

The AutoAudioCenter channel provided an overview of the configuration and main features of the Starline i95 blocker.

The display unit is mounted in the cabin. The device is used to warn the car owner in advance about the absence of a tag and the upcoming blocking of the internal combustion engine. The module also warns about a low battery. The main feature of the element is that it “communicates” with the processor device via a wireless channel. Accordingly, it has no electrical connection with the main module, which means that it can be connected to any electrical circuit where there is power. Correct setting block provides necessary work blocker.

How to install?

The StarLine i95 immobilizer processor unit is installed in a secret place and inaccessible to a criminal.

The device connector is equipped with nine contacts, each of which is designed for connection to separate electrical circuits:

• mass, that is, grounding;
• device power contact;
• contact for connection to the ignition switch;
• output for connecting an open relay contact;
• connection contact closed output relay;
• common output for connecting a relay;
• two outputs for connecting the electrical circuit for opening and closing the electromechanical hood lock;
• lock limit switch;
• output for connecting a status radio channel;
• contact for connecting a universal radio channel.

You may not connect all contacts during installation, but to ensure minimum protection you will need to connect all but the last two outputs. To activate the display module, you must connect the ground and the ignition switch. Length of wires included in installation kit, is 25 cm. Because of this, the consumer will have to extend the cables.

Channel Garage Region-51 provided universal instructions for installing an engine blocker.

User manual

Control various modes and settings of StarLine i95 equipment is carried out using the technical manual.

Opening car doors

A signal to open the door locks is issued in the following cases:

• when the car owner approaches the car at a distance that corresponds to the tag’s coverage area;
• if the ignition is turned off when the opening function is configured door locks when turning the key in the lock to the Off position;
• if the system goes into emergency shutdown mode, but this happens after entering the password;
• when turning on the service mode.

Closing car doors

The closing signal is transmitted in the following cases:

• if the car owner has moved away from the car at a certain distance, which the consumer has previously configured;
• if the option of additional closing when starting to move is enabled and the car starts moving.

Using the service mode

If you plan to hand over the car for service, you need to activate the service mode:

1. Click on the button located on the tag body and hold it. This will cause the device to check the specified operating mode and establish communication with the processor module. The key must be held for seven seconds until the LED indicator lights up yellow.
2. The key is released the moment the LED indicator lights up for two seconds.
3. If the immobilizer enters service mode, the light will blink yellow again.

Konstantin Skots spoke about the features of the blocker and its use using the example of a car Kia Sportage.

Tag registration

New tags are registered as follows:

1. Click on the radio tag button located on the case. It is held for three seconds, then released.
2. The successful binding of the RFID tag will be indicated by green flashes of the diode light bulb. The number of blinks of the diode will correspond to the number of attached tags.
3. To transfer the radio tag to normal mode To function, you must remove the power supply from the device and then reinstall it.
4. The previous three steps are repeated to bind the remaining RFID tags.
5. When the registration procedure is completed, the ignition turns off.

Advantages and disadvantages

Advantages of Starline blockers:

1. Effective protection against theft. Produced by blocking the internal combustion engine.
2. Identification of the car owner. To identify, the user simply needs to approach the machine.
3. The presence of a secure communication channel ensures the safety of transmitted signals from interception.
4. Availability of built-in motion controller. At correct connection Immo to the alarm, thanks to this sensor, you can configure the remote start of the internal combustion engine.
5. Possibility of control door locks, as well as the hood lock.
6. Thanks to the waterproof case, breakage of tags due to exposure to water is excluded.
7. Using a universal connection channel will allow the blocker to connect to limit switches, brake pedal or touch controller.
8. Ability to configure the engine blocker using a computer.

The main disadvantage, according to reviews, can be called relatively high cost, it is about 7 thousand rubles. For this amount, a consumer can purchase an alarm system with a siren.

The Starline i95 immobilizer is a car engine blocker designed to prevent not only theft, but also robbery of a car. The electronic mechanism of this modification is a highly reliable device due to identification of the owner by a contactless tag at a frequency of 2.4 GHz.

[Hide]

Specifications

Review technical characteristics Starline anti-theft devices:

• immobilizer protection is carried out using interactive pulse coding;
• the maximum range at which user authorization is performed is 10 meters from the transceiver;
• The microprocessor module is powered from a voltage of 9-16 volts, RFID tags - 3.3 V;
• the current consumption with the ignition off is 5.9 mA, with the ignition on - 6.1 mA;
• range operating temperature control unit - from -40 to +125 degrees, radio tags - from -20 to +70;
• The battery life in the electronic key is 12 months.

The Autopulse channel talked about technical features and functionality of Starline blockers.

Equipment

Delivery kit for Starline i95 immobilizer:

• engine blocking module;
• two electronic keys (radio tags) with batteries;
• User's manual for installation;
• service manual for using and setting up the blocker;
• plastic card;
• beepper or buzzer - sound detector;
• consumer reminder.

Photo gallery

Photo of the immobilizer configuration and elements:

Engine blocker delivery set Two radio tags for immo control

Main functions

Description of blocker options:

1. Availability of two protection modes vehicle. Typically, diagnostics of the presence of an RFID tag is carried out once, after turning on the ignition switch. When the anti-theft mode is activated, the electronic key is checked continuously throughout the trip.
2. Activation of the power unit lock when starting to move. This allows the use of an immobilizer in conjunction with automatic and remote engine start systems.
3. Reliable immo protection against detection of engine blocking circuits. The device is activated briefly, but this time will be enough to stop the power unit. Then the circuit will remain closed.
4. Indication of the current mode of operation of the immobilizer on the electronic key, as well as on the control unit.
5. Option to change the type of operation of the blocker using a radio tag.
6. Availability of service mode. With its help, you can disable the device’s security options if the vehicle is sent for service.
7. Setting mode. The function allows you to reprogram the unlock PIN code.
8. Option to check connection quality. The device automatically diagnoses the connection of all elements.
9. Engine immobilizer device registration function. This will allow you to calibrate additional elements such as blocking relays.
10. Availability of control option central locking in automatic mode.

Modifications Starline i95

The main difference between the Starline i95 Lux and Eco models is the absence of the “Hands Free” option for the Eco modification blocker.

The Eco model from the immobilizer line is the most affordable option in terms of cost and belongs to the class of contactless systems. The Lux blocker is the most modernized in terms of functionality - the user has the ability to configure the range of the transceiver to authorize the owner. This model has a remote label equipped with an LED and a control key (it is used to emergency shutdown of the device).

Differences between i95, i95 Lux and i95 Eco models:

Advantages and disadvantages

Advantages:

1. Protecting your vehicle from theft by blocking the engine.
2. Possibility of identifying the owner of a car using a radio tag. If it is missing, the lock will not be disabled.
3. Using a secure communication channel for data transmission, which prevents the possibility of pulse interception.
4. Using a built-in motion sensor. The engine lock will not turn off if an unauthorized entry into the vehicle interior is detected.
5. The electronic key for controlling the immobilizer is supplied in a waterproof case. This prevents the tag from breaking due to exposure to water.
6. Availability of a universal communication channel. This provides the ability to connect limit switches, additional sensors, as well as a brake pedal controller to the immobilizer.
7. Possibility of configuring the main functions of the blocking device using a computer.

The main disadvantage of Starline i95 immobilizers, according to reviews, is high price, for which you can purchase a full-fledged alarm system with an engine blocker.

How to install an immobilizer?

Before installing the blocker, you will need to turn off the ignition, all electrical equipment and power to the on-board network. To do this, the negative terminal is disconnected from the battery under the hood. After disconnection, its connection to the body is not allowed, as this will lead to a short circuit and damage to the battery.

Detailed installation instructions are included with the immobilizer.

Power connection

Power connection features:

1. The contact element, marked as “GND”, is connected to the vehicle ground. The wire can be connected to any standard bolt installed on the body.
2. To power the device, the “BAT” contact is used, and there should always be voltage on it. Therefore, this conductor should be connected directly to a battery or other component that is constantly on.
3. When connecting the Starline i95, the “IGN” contact is connected to the electrical circuit, which receives 12-volt voltage when the ignition and engine are turned on.

Connecting outputs

Contact elements “Lock” and “Unlock” are used to control the central locking or hood locking product.

The main methods of lock control, outputs, signals for opening and closing are given in the table:

The "Input" contact element must be connected to the corresponding limit switch. This connection will provide the ability to monitor the status of the locks on the hood and doors. If they are open, then locking will not occur, so there should be a negative signal on this cable when the hood and doors are open.

The “Output” contact makes it possible to use the blocker in conjunction with external equipment to monitor the presence of the car owner in the cabin.

It works like this:

1. If the electronic key is not in range or is located far away, the resistance on the wire will be high. Accordingly, the contact must be open.
2. Activation of the “ground” or negative contact is performed when the owner with the mark is near the transceiver.

Connecting a sound detector

Features of connecting a sound detector:

1. The “Output” contact must be connected to the negative terminal of the beeper, and the positive terminal to the “BAT” cable on the block.
2. If necessary, you can connect the LED bulb to the buzzer in parallel. But it is necessary to add a resistor element rated at 1-2 kOhm to the electrical circuit.
3. When installing, the buzzer must be positioned so that its signals are not muffled and are audible to the driver.
4. Do not place the beeper next to the blocking module, as this will cause false positives motion controller.

Connecting a universal channel

The “EXT” contact element can be connected to one of the outputs:

1. Plus on the brake pedal. Used to poll the device before starting to block the engine if the Anti-Theft function is enabled.
2. Plus the limit switch. Used to determine the status of door locks or hood. Its use is advisable on vehicles with a 12-volt potential on the device, if the described lock products are open.
3. Negative contact of the touch controller (this controller is not included in the package and is installed separately). With the “Hands Free” option enabled, if the electronic key is within range, central locking will open only after receiving a sensor impulse. The impulse is transmitted to locked doors when the radio tag is removed or the controller is exposed for a long time.
4. Negative brake light output rated at 400 mA. This element is used to notify other drivers that the vehicle has stopped before the power unit is blocked. Warning light pulses in the cabin are duplicated by brake lights.
5. Negative output for side lights, rated at 400 mA. This element is used for light indication of automatic opening and closing of door locks. When a locking signal is given, the side lighting devices will blink once. Along with the impulse to open the door locks, the headlights will flash twice.

Connection diagrams

Connection diagrams are shown in the photo:

General control unit connection card

Manual

According to the operating manual, before using the lock, you must install a working power source in the electronic key. To do this, you need to remove the back cover of the tag and insert the battery into it, taking into account the polarity. The LED indicator will indicate that the device is turned on. If you are programming new electronic keys, you do not need to insert a battery.

Key fob and its activation

Key Programming Guide:

1. The ignition turns on. You must wait until the immobilizer plays a beep. Then the ignition is turned off.
2. Then it is activated again, and the blocker should emit a series of sound signals. To unlock, you need to know the code that is indicated on the plastic card. The ignition must be turned off at the moment when the number of sound signals corresponds to the first digit of the password.
3. The procedure for entering the remaining code characters is similar. The ignition turns on and if the immobilizer accepts the password, three beeps will sound. This indicates that the blocker has entered the emergency unlock menu.
4. The next step is to enter programming mode. After turning on the ignition, one long beep will sound after twenty seconds. The system turns off while the pulse is playing.
5. The ignition is turned on again. Seven short sound pulses should be heard, indicating that you have entered the menu for registering new key fobs.
6. The button on the radio tag is pressed. Keeping it in this state, you need to install a new power source in the key. The key is pressed for three seconds.
7. If the tag is successfully linked, the LED element on the key will begin to flicker green. The number of blinks corresponds total number programmed key fobs. If the binding is not completed, the LED will glow red.
8. To return the electronic tag to normal operating mode, you must remove and reinsert the battery.
9. The actions described in paragraphs 6-7 are repeated for each programmable key.
10. After completing the task, you must turn off the ignition. All RFID tags must be registered in one binding cycle, and up to four keys can be programmed in total.

Alerts and indications

Sound and light signals are given in the table:

Door lock control

When the “Hands Free” function is activated, the doors open when the following events occur:

• the approach of a car owner with an electronic key to a stationary vehicle (the range is programmable by the user);
• disabling the ignition system (if this function is previously configured);
• transition to the immobilizer emergency unlocking menu if the PIN code has been successfully entered;
• entering service mode.

The door locks are closed when the car owner with the electronic key moves away from the immobilizer control unit. Deactivation occurs when you start driving, if the additional locking function has been previously configured.

If the universal “EXT” channel is used, then the door locks are closed by pressing the presence controller for three seconds for a long time. In this case, the electronic key must be within range.

Signals to open locks when using the “EXT” channel are given if:

• the hand touch controller is triggered when the radio tag is within the operating radius of the transceiver;
• the ignition is turned off if the user has configured this function in advance;
• the emergency unlock menu is entered if the code was entered correctly;
• the transition to service mode occurs.

Hood lock control

Signals to lock the hood are transmitted to the control unit when the car owner with the tag moves away from the vehicle. In this case, the ignition system must be turned off. Also, the locking product will close when impulses are issued, warning of the impending blocking of the power unit.

The lock is opened if:

• the ignition in the car is turned on, and the tag is within the range of the transceiver;
• enters the immobilizer emergency unlocking menu;
• the car owner with an electronic key falls within the control module’s coverage area;
• the service mode is entered.

User Andrey Popov, using the example of a Hyundai Grand Starex car, spoke about controlling the Starline i95 blocker.

Service mode

Entering the service mode is done as follows:

1. A key on the electronic key is pressed and held. The immobilizer must diagnose the specified operating mode and establish communication with the control unit. The RFID tag button is pressed for seven seconds until the LED begins to flicker yellow.
2. When the light on the mark lights up for 2 seconds, the button is released. The entry into the service mode of the engine blocker will be indicated by a single blink of the LED.

Programming the display module

An additional block is bound like this:

1. The power cord is connected to the device.
2. After activation it is made automatic control communication channel. The end of this procedure occurs ten seconds before the LED light bulb stops flickering.
3. The button on the display unit is pressed and held for three seconds, then it must be released.
4. If the module is successfully paired, the LED light will blink green. Otherwise the flickering will be red.
5. To exit the programming menu, the ignition is turned off.

Download installation and operating instructions for Starline i95 in PDF format

You can download service manuals for installation and use using the following links:

How much does the Starline i95 immobilizer cost?

Approximate prices for purchasing an engine blocker:

Video

Auto electrician Sergei Zaitsev spoke about the features of controlling and configuring the Starline engine blocker.

Immobilizer 5th generation StarLine i95 ECO, is a contactless immobilizer in which the tag key is recognized using interactive authorization. Unlike their older immobilizer brothers StarLine i95 And StarLine i95 Lux The presented model does not have the ability to implement the “Hands Free” function, which allows you to control the central locking of the car without pressing keys, but only by approaching and removing the mark.

If you plan to install a hood lock along with the immobilizer, then we recommend that you still opt for the StarLine i95 and StarLine i95 Lux models.

Anti-theft device StarLine i95 ECO guarantees safety required charge battery car up to 3 months in active mode thanks to the use modern technologies and progressive software solutions.

Sealed thanks to the unique waterproof design of the body, the tag can be kept in water at a depth of 1 meter for 30 minutes, which removes any restrictions on its storage. You have a chance self-regulation tag sensitivity for more flexible adjustment of range during authorization. The immobilizer's built-in motion sensor allows you to reliably protect the car and simultaneously perform remote engine starts when the car is stationary. The immobilizer is equipped with outputs for connecting the hood lock: automatic locking of the hood in the absence of the owner guarantees reliable protection of the engine compartment and the vehicle's electrical system.

Company BARBUS installs car alarms and immobilizers supplied by UltraStar. UltraStar is a group of companies that has been successfully operating in the market of radio electronics, telecommunications and security systems for more than 25 years. The mission of the UltraStar company, which it has followed since 1992 to this day: “To provide residents of Russia and the Commonwealth Countries with a high level of security based on advanced technologies of the world community.” IN Price list Some of the most common models of car alarms and immobilizers are presented. We constantly test new models appearing on the market and try to offer our customers the most hack-resistant and reliable systems. Our employees constantly improve their skills, take part in conferences and seminars on issues related to security and safety systems. Have an opportunity . Full list you can see it on the page Retail sale of alarms .
Company BARBUS is an authorized service center for the installation of automobile security systems trademark StarLine in St. Petersburg and has a corresponding certificate .

Payment is possible either in cash or by non-cash payment. Bank cards are accepted for payment.

Company BARBUS provides installation services for alarms, immobilizers, mechanical means protection and audio equipment for any cars of domestic and foreign production and operates with 1999 of the year.

StarLine i95- new generation car immobilizer. The operating principle is based on identifying the owner using a special tag. The tag is protected from moisture, even if you put it under water, it will remain operational. A motion sensor is built into the main body, which allows StarLine i95 work adequately with engine autostart modules. The principle is simple: the engine starts on command, but the vehicle cannot move without the immobilizer tag.

Under control StarLine i95 there may be a hood lock. This immobilizer has very convenient settings and quick switching of operating modes.

Operating modes

Immobilizer StarLine i95 capable of operating in one of two modes:

• Anti-robbery- protects against sudden seizure of the car, constantly monitors the presence of a tag within a radius of five meters. Otherwise it blocks the engine.
• Standard- the presence of the mark is checked after starting the engine.

Differences between StarLine i9x versions

* - to connect the hood lock, a relay must be installed.

Hands-free operation
Communication with the vehicle is possible using a small identification tag. All you have to do is approach the car, the tag will be recognized and the system will automatically unlock the car. The tag can be kept in your pocket or wallet, whichever is more convenient for you.

Hood protection
StarLine i95 automatically locks the hood lock in the absence of the owner of the identification tag. Very useful feature, preventing outsiders from interfering in the engine compartment.

Special power keys
Power outputs contribute to silent operation of the immobilizer and also protect the outputs from possible short circuits.

immobilizer tag

Main features of StarLine i95

• Possibility of controlling the hood lock.
• Door lock control.
• Built-in motion sensor.
• Indicator mark for working in “Hands Free” mode.
• Wide range of customization options.
• Warning signals.
• Fast mode switching.
• Energy efficiency.
• Simulation of engine failure.

Completeness

• Lock module StarLine i95.
• Keychain tag - 2 pcs.
• Sound notification.
• Installation Guide.
• User manual.
• Memo to the owner.
• Card with PIN code.
• Package.

Documentation

StarLine Master (ZIP, 18.8 MB) - quick and easy immobilizer setup

• Download operating instructions (PDF, 2 MB)
• Correct installation guide (PDF, 1.4 MB)
• Brief instructions (PDF, 0.5 MB)

It would seem that there are now enough modern and high-quality immobilizers, but in reality it turns out that you have to choose quite pickily, because not all manufacturers really invest in their projects, preferring to spend more on advertising. One of the very decent options is the Starline i95 Lux model, which boasts not only a good advertising campaign, but also real opportunities, which have already been appreciated by many car enthusiasts.

The Starline i95 Lux model boasts the following strengths, which we could hardly do without:

• protection against theft based on engine blocking and the need to identify the owner;
• ability to control the hood lock;
• effective protection against the most complex methods of intelligent attacks;
• modern waterproof tag.

ATTENTION! A completely simple way to reduce fuel consumption has been found! Don't believe me? An auto mechanic with 15 years of experience also didn’t believe it until he tried it. And now he saves 35,000 rubles a year on gasoline!

This immobilizer is a new product, which means that really high-quality technical solutions are used here; the manufacturer was able to do a lot to ensure that the cars of the people who chose its equipment were 100% protected. It is not always possible to believe this, because we are accustomed to listening to such laudatory opinions about various techniques, but this is not the case.

Eco version

The Starline i95 Eco version is worthy of attention, which has the following security functions:

• owner presence signal;
• warning signals;
• switching modes.

The most interesting thing is that this immobilizer can simulate an engine malfunction. It’s hard to imagine that you might come across hijackers who know about such features of their work. modern systems. Now immobilizers become a multi-level obstacle to the possibility of car theft.

Technical Excellence

The Starline i95 Lux immobilizer has become a truly modern project. Such a large number positive feedback you could hardly expect such a project. Not surprisingly, it sells very quickly, and car enthusiasts are so amazed by the quality of the system that they cope with everything without difficulty. If earlier such technologies were just emerging, now specialists the highest level can simply ensure that wireless engine locking is provided using this device, that those signals from the ID tag used in the system cannot be intercepted. Conversational authorization is performed at a frequency of 2.4 GHz, which is another advantage of the system.

Besides, great solution became a special waterproof case. This project is comprehensive, integral, one strong point complements another and so on - the result is the most powerful protection of the vehicle against theft. One of distinctive features This series is the ability to block the car hood. This seemingly too simple solution actually works great. The fact is that the inability to penetrate the engine compartment of a car does not allow car thieves to solve some of the problems that stand between them and your car. Even more important is that protective systems becomes larger and, like the layers of an onion, thieves have to spend a lot of time and effort to overcome the defense systems, and they just don’t have time, which means your car is completely safe.

Nice bonuses

The Starline company is a clear leader in this area, which means that if you would like to receive decent support from specialists, then this is where you should turn for it. The instructions for the equipment are not complicated and will allow anyone to understand all the intricacies of the device’s operation. At the same time, the instructions will not answer the question of how to overcome these protective systems, so it will not be the answer to all the problems of hijackers. On the contrary, the instructions will confirm that the hijackers are completely powerless against what the Starline company has created.

If a company puts its heart and soul into its projects, it is much more visible if you pay attention to the little things. For example, these immobilizers use waterproof housing designs, which means that there are no restrictions on their storage and operation, which means you will not worry about the quality of safety, signal transmission, or the ability to transmit commands. There is no reason to worry about the rechargeable battery, the charge of which will last for at least 3 months of constant use. Indeed, immobilizers require very little energy, the signal is sent instantly, so the operating time always tends to zero. If only larger batteries could be placed in this device, the charge would last for years.

Between Lux and Eco

Please note that there are minor differences between the Lux and Eco models. While Eco lacks just a couple of additional features, this version boasts:

• hood locking and power lock control outputs;
• moisture resistance of the tag;
• telematic setup, that is, “in the air”.

If we talk about the Lux model, then this immobilizer received two additional features:

• “Hands-free” technology, which greatly simplifies the operation of central door locking;
• very convenient interior modules that allow you to control all systems, as well as a display module.

The complete set of this equipment will delight you with its completeness; everything you need and useful is really here:

• blocking module;
• user guide;
• card with code;
• sound annunciator;
• installation and operation manual;
• tags with batteries.

Right now you have a system in front of you that can guarantee the safety of your car in any situation. You probably already know how easy it is for cars to be hacked without such security systems: it can only take an attacker a couple of tens of seconds. Now you have the opportunity to defend yourself - use it.