The primer is stainless. Nerjamet-primer is an anti-corrosion alkyd primer. Description and characteristics Stainless steel primer alkyd primer for metal

It is a suspension of pigments, fillers and anti-corrosion additives in a solution of modified alkyd resin in a mixture of organic solvents.

Grunkor used in integrated system for protection where high decorative look and high demands are placed on anti-corrosion protection.

Recommended for coloring metal structures of varying degrees of complexity with operation in an environment with atmospheric corrosiveness up to C3, according to ISO 12944. Compatible with most paints and varnishes. Ideal for renovating old paint coatings.

Can be used as independent protection of metal (including for inter-operational storage of metal) indoors in the absence of constant contact with aggressive environments.

Allows for durable and reliable protection:

• building metal structures
• pipes and pipelines
• external surfaces containers for storing liquids
• garages
• fences
• metal products
• machine parts and mechanisms
• equipment
• reinforced concrete structures and roofs.
• etc.

Tara

Container 20kg. Attention! The label is equipped protective elements from fakes.

Surface preparation

The surface of the product should not have burrs, sharp edges (with a radius of less than 2 mm), welding spatter, welding undercuts, cutting marks, or flux residues.

The metal surface must be cleaned from rust, scale, metal oxides by abrasive blasting to a degree of Sa2 1/2 according to ISO 8501-1 or ISO 12944-4 (most of the mill scale and paint coating, foreign bodies must be removed, the surface must have a uniform metallic color). After cleaning, the surface must be dedusted compressed air.

Degreasing of the surface to degree 1 according to ISO 8502 (no traces of grease on the filter paper after wiping the surface) is recommended to be done with a degreaser OM-01S.

Coloring should be carried out no later than 6 hours after machining when working on outdoors and 24 hours when working indoors.

When painting, the surface must be dry and clean.

Mode of application

Before the beginning painting works Mix the primer well with a low-speed drill with a stirrer attachment throughout the entire volume of the container, paying special attention to the areas near the walls and bottom of the bucket.

Primer if necessary Grunkor bring to working viscosity with solvent R-A01. The recommended working viscosity of the material is determined experimentally depending on the dyeing method and equipment used. The dilution rate can reach up to 10% .

• Temperature applying enamel from: 0 before +40 ºС., And relative humidity no more 80% .
• Touch dry (dust free) at temperature +20 ºС behind 20 min.
• Dries to degree 3 at temperature +20 ºС behind 30 min.
• Before applying top coats, wait at least 1 hour.
• Recommended thickness for one-time application 25-30 microns dry coating.
• The final coating characteristics are achieved through 5-7 days at a temperature +20°С.
• Transportation and installation of metal structures can be carried out no earlier than 3 days after coating.
• Operating temperature range from -40°С to +60°С.

Application modes are selected for each individual case, depending on the operating conditions and the brand of the device.

Primer application is possible:

• airless method (nozzle 0.33-0.38 mm, pressure 6-8 atm.)
• pneumatic spraying (nozzle 1.8, pressure 2-3.5 atm.)
• brush
• roller
• pouring
• dipping

Welds, bolted connections, end edges and hard to reach places Before painting, apply with a brush using the stripe painting method.

Consumption

Soil consumption: 60-100 g/m2 at film thickness 25-30 microns.

Precautionary measures

When conducting interior works, and after finishing, thoroughly ventilate the room. Use individual means protection.

Storage

Keep away from fire! Store the composition in a tightly closed container, protecting it from heat and direct sun rays at temperatures from - 50°С before +40°С.

Guaranteed shelf life in original packaging – 12 months from the date of manufacture.

Technical data

High anti-corrosion properties
unique “three in one” formula (applied directly to rust, no priming required)
quick-drying

Primer-enamel Nerzhamet is a single-package material based on alkyd resins with polymer additives in organic solvents.
Combines the properties of a rust converter, primer and finishing coating.

Provides long-term protection of the metal surface from corrosion, aggressive atmospheric influences, humidity, sun, etc.
Nerzhamet enamel has high hiding power and forms an even semi-gloss film.
It is used for priming and painting steel and cast iron structures with both a cleaned surface and tightly adhered rust and old coating (thickness of corrosion products up to 60 microns).
Used as an independent two-layer coating. The coating, consisting of two layers of primer-enamel, retains the protective and decorative properties V atmospheric conditions when applied to a rusty surface, at least 5 years, when applied to a previously cleaned surface – 7 years.
The coating, consisting of one layer of primer and two layers of primer-enamel of the Nerzhamet system, preserves protective properties in atmospheric conditions for at least 7 years on a rusty surface.

Main areas of application of Nerzhamet
Priming and painting of steel, cast iron and other ferrous metal surfaces, including those covered with rust and remnants of the old coating, tightly adhered to the metal. Allows you to provide durable and reliable protection against corrosion of building metal structures, metal products, roofs, pipes, pipelines, garages, household heating radiators, machine parts and reinforced concrete and steel structures. The enamel can be used for painting gas pipelines, equipment, machine tools, agricultural machinery and construction vehicles.
Anti-corrosion enamel is indispensable for painting metal structures with complex profile, including large-sized metal structures and metal products. When painting particularly critical structures, it is recommended to first use primers: Nerzhamet-primer, Zinconol or Phosphogrunt.

Tinting
Standard colors: white RAL 9003, gray RAL 7040, black RAL 9005. Also in stock at the manufacturer's factory there are always basic colors of primer enamel: yellow RAL 1028, bright green RAL 6029, dark green RAL 6020, beige RAL 1001, red brown RAL 3009, blue RAL 5005, orange RAL 2010, red RAL 3020.
At the customer's request, tinting of primer-enamel is carried out in any color according to the RAL catalog by prior agreement, starting from 200 kg. The price of Nerzhamet may be slightly higher.

Preparing the base for application
The surface must be cleaned of loose rust and scale, dirt, oils, dust and degreased. The surface must be dry; enamel should not be applied to a damp surface.

Preparing the composition for application
Mix the primer-enamel thoroughly and dilute it to working viscosity (depending on the application method) with xylene, solvent or P-universal, no more than 20% of the volume. When using other solvents, no guarantee of quality is given!
When carrying out painting work in rooms with temperatures below +10°C, it is recommended to maintain the primer-enamel at room temperature during the day (up to a temperature of +15°C).

Mode of application
Primer-enamel is applied in several ways: airless or pneumatic spray, brush or roller.
The recommended number of paint layers is 2-3.
When painting rusty surfaces with Nerzhamet, it is recommended to apply the first layer of more diluted enamel with a thickness of 20-25 microns. Subsequent layers are 30-40 microns thick. If it is necessary to obtain the required thickness of the finishing coating, the number of layers can be increased.
It is recommended to apply subsequent layers after the previous one has dried to touch.
The recommended time for interlayer drying and drying of the primer-enamel may vary depending on air humidity and the intensity of air exchange near the painted surface.
Temperature conditions for applying enamel: –5 to +50°С.
Drying time at a temperature of +20°C is 4 hours.

Putting the coating into operation
- with hot (95-115°C) drying - after 1-2 days
- with natural drying - after 5-7 days.

The maximum duration of coating exposure is not limited.
At long-term storage painted structures, before applying the next layer, salt, chalking products and other contaminants should be removed from the surface by washing with a clean fresh water under high pressure, then dry the surface to be coated.

Dried layer data
After drying, Nerzhamet primer-enamel forms a smooth, uniform, semi-glossy surface.
The thickness of the coating in one layer depends on the amount of material used during application:
with a primer-enamel consumption of 0.1-0.14 g/m 2 – 30-35 microns
at a primer-enamel consumption of 0.15 g/m2 – 40 microns

The operating temperature of the product is from –60°С to +100°С.

Consumption
Enamel consumption is 0.1-0.15 kg/m2, depending on the shape and structure of the surface to be coated.

Tara
You can buy Nerzhamet in buckets of 10 and 20 kg. And also in cans of 3 and 0.9 kg.

Precautionary measures
When carrying out interior work, as well as after completion, thoroughly ventilate the room. Use personal protective equipment.

Storage
Do not heat! Keep away from fire!
Store the composition at temperatures from –30°C to + 30°C in a tightly closed container, protecting from heat and direct sunlight.
Guaranteed shelf life in original packaging is 2 years from the date of manufacture.

Technical data

Nerzhamet-Grunt is a highly effective anti-corrosion alkyd primer for metal.

Anti-corrosion alkyd primer, saturated with corrosion inhibitors. The primer is used for both clean and rusty metal surfaces. Apply directly to rust.

Anti-corrosion primer Nerzhamet-Grunt- a two-in-one product. Combines a rust converter and anti-corrosion primer.

Anti-corrosion primer provides long-term protection of the metal surface from corrosion, aggressive atmospheric influences, humidity, sun, etc. The primer has high hiding power and forms an even semi-gloss film.

Nerzhamet-Grunt Can also be used as an independent coating.

Application

Anti-corrosion alkyd primer Nerzhamet-Grunt used to protect surfaces made of ferrous metal and cast iron, including those covered with rust and remnants of the old coating, tightly adhered to the metal.

Anti-corrosion primer allows you to provide durable and reliable protection against corrosion of building metal structures, pipes, household heating radiators, external surfaces of containers water towers, garages, machine parts and mechanisms, as well as reinforced concrete structures and metal roofs.

Primer for metal is made using modern technologies, using high-quality raw materials from domestic and foreign manufacturers.

Mode of application

Stir the primer before application. Apply to a dry surface, free of dirt and loose rust, with a sprayer, brush or roller in one or two layers. If necessary, dilute the primer to working viscosity with white spirit.

Temperature conditions for applying the primer: from -5°C to +50°C. Drying time at +20°C is 4 hours.

Consumption

Soil consumption - 0.25-0.3 kg per 1 sq.m. depending on the shape and structure of the surface to be coated.

Color

Basic colors: gray, red-brown.

Precautionary measures

When carrying out interior work, as well as after completion, thoroughly ventilate the room.
Use personal protective equipment.

Storage

Do not heat. Keep away from fire. Store the soil in a tightly closed container, protecting it from heat and direct sunlight.
Guaranteed shelf life is 12 months from the date of manufacture.

Technical data

Material from the site.

Regardless of the type of structures and their operating conditions, the simplest and most in an accessible way Corrosion control is the use of protective paint coatings (rust paint).

Currently, rust paints have gained particular popularity, i.e. paints and varnishes, which can be applied directly to corroded metal. For this purpose they are used special compounds, including inhibitory additives. Inhibitors are substances that at the chemical level prevent the occurrence of corrosion, slowing down or preventing the oxidation reaction.

Such anti-corrosion compounds, in particular, include: Nerzhamet and primer according Nerzhamet-Grunt. These coatings contain corrosion inhibitors and targeted additives allowing them to be applied to dense rust up to 100 microns thick.

Anti-rust paint - Nerzhamet

Anti-rust paint Nerzhamet is a high-quality paint for protecting metal. the paint is a unique three-in-one product. Combines a rust converter, anti-corrosion and wear-resistant enamel. The paint can be applied directly to rust and dries extremely quickly in air.

Rust paint Nerzhamet intended for painting both clean and rusty metal surfaces, rusty metal. Anti-corrosion paint is used to protect steel, cast iron and other ferrous metals, including those covered with rust and remnants of old coatings tightly adhered to the metal.

The main advantages of rust paint Nerzhamet can be attributed:

Apply directly to rust;

Dries quickly at any temperature;

Does not require priming;

Forms a durable film on the metal surface;

Provides high corrosion resistance of the coating;

Easy to use.

Anti-corrosion primer Nerzhamet-Grunt

Primer for rust Nerzhamet-Grunt- highly effective anti-corrosion primer for metal, saturated with corrosion inhibitors.

Primer Nerzhamet-Grunt is a two-in-one product. Combines a rust converter and anti-corrosion primer. The primer is applied directly onto the rust.

Metal primer is used for both clean and rusty metal surfaces.

Anti-corrosion primer provides long-term protection of the metal surface from corrosion, aggressive atmospheric influences, humidity, and sun. The primer has high hiding power and forms an even semi-gloss film.

Nerzhalux-Grunt - Adhesive primer for aluminum and non-ferrous metals. High-quality one-component primer for non-ferrous and ferrous metals based on modified acrylic copolymers, targeted additives and organic solvents.

Primer Nerzhalux-Grunt used for pre-priming of carbon and of stainless steel, aluminum, magnesium, titanium alloys and galvanized surfaces......

Epostat-Grunt - epoxy chemical-resistant primer for metal protection .

Epoxy two-component chemical-resistant primer for metal. Contains corrosion inhibitors and stabilizers of corrosion products, forms a chemical-resistant and water-resistant coating.

Epostat-Grunt used for products and equipment at chemical, petrochemical, oil refining, pharmaceutical and Food Industry......

Epostat-Putty - epoxy chemical-resistant putty for metal protection .

Epoxy two-component chemical-resistant primer for metal. Has high water resistance, resistance to mineral oils, gasoline, detergents.

Epostat-Putty used for finishing products and equipment at enterprises of the chemical, petrochemical, oil refining, pharmaceutical, food, nuclear and electric power industries, automobile and shipbuilding.

Covering operating temperature from -50°С to +120°С......

• Nerzhamet-Grunt - anti-corrosion primer for metal
• Polimeron-Grunt - anti-corrosion special primer
• Aquametallic-Grunt - water-based primer for metal
• Phosphoprimer - phosphating primer for metal
• Zinconol - cold galvanizing of metal