Where to buy a plasma welding machine IPR 40k. Manual plasma cutters resanta etc. Preparing for work
Read also
Inverter plasma cutter Resanta IPR 40K provides excellent quality cuts. The cutting is carried out by passing compressed air through a plasma arc. The long power cable ensures freedom to carry the device while performing the task. A smooth change in the current value is achieved by rotating the potentiometer toggle switch. The lightness and compactness of the unit facilitates movement within the working area with the torch on the shoulder. The plasma cutter is very easy to use.
Basic parameters
- Maximum current - 40 A;
- Minimal. current – 15 A;
- Pressure – 5 bar;
- Maximum cutting thickness - 12 mm;
- Voltage – 220 V;
- Arc ignition – contact;
- Built-in compressor - no;
- EURO connector – no.
Comes with:
- mass clamp;
- box.
Advantages
- the handle of the plasma cutter Resanta IPR 40k makes it easier to carry the unit;
- loops on the body are provided for attaching a strap for carrying the cutter on the shoulder.
- a pressure gauge, a current change toggle switch, and other indicators on the control board make the task easier;
- ventilation holes remove heated air from the electric motor, preventing strong heating;
- the start button on the burner handle simplifies starting the device;
- durable wear-resistant housing;
- neat precise cut;
- high efficiency value.
Plasma cutter Resanta IPR-40K can be purchased in our online store at affordable price. Delivery in Moscow within the Moscow Ring Road - 400 rubles, check the cost of delivery in the Moscow region with the operators, the cost of delivery in Russia depends on the remoteness of your region.
Our managers will be happy to answer your questions and help you choose the right products.
As in industrial production, and among private craftsmen, in the manufacture household appliances there is a need to cut out without unnecessary labor a metal sheet. The use of classic rotating disk devices is often associated with increased danger injuries, and also with low efficiency, since a lot of time is spent on work. Usage gas burners closely related to the availability of fuel.
Devices that use ambient air as a working fluid do an excellent job of cutting metals. One of such devices is the inverter plasma cutter Resanta IPR 40 and IPR 40K. This product has proven itself in the market as a stable working device. Those who choose an inverter plasma cutter of the Resanta model leave positive reviews about his work, which may indicate the correct investment of capital.
The process in which the outflow of plasma cuts the metal is accompanied by the passage of the working fluid through an electric arc.
Air acts as a working fluid in an inverter plasma cutter. Air turns into plasma when the temperature rises, which allows metal to be cut. Using a plasma cutter, you can both cut metal and make technological holes in it.
The inverter plasma cutter (Resanta IPR series) has two varieties:
- IPR-40;
- IPR-40K.
The inverter plasma cutter Resanta IPR - 40K is distinguished by the possibility of contact ignition, while the inverter ensures smooth autostart. Contact ignition implies that the electric arc will light up only at the moment the cutter comes into contact with the working surface.
Specifications
Specifications of the Resanta IPR‑40 unit are extensive and guarantee high-quality work.
Network size:
- voltage – 230 V;
- frequency – 50 Hz;
- current strength – 30 A.
Output current – 15–40 A.
Sequence of work processes:
- 40A – 35%;
- 30A – 65%;
- 20A – 100%.
Control board – IGBT Invert. And the air pressure is 0.4~0.5 MPA.
Cutting ability:
- steel – 12 mm;
- stainless steel – 7 mm;
- light metal (aluminium) – 6 mm.
The unit's ignition system is pilot ignition of the arc (non-contact).
Electronic indicators:
- green tint – power is on;
- yellow tint - during cutting;
- red tint – the “protection” temperature has been exceeded.
Disconnecting the torch cable - no.
Network dimensions:
- voltage – 230 V;
- frequency – 50 Hz;
- current strength – 30 A.
Output current – 15–40 A.
Duty cycles:
- 40A – 40%;
- 30A – 60%;
- 20A – 100%.
Control board – IGBT Invert. Air pressure – 0.4~0.5 MPA.
Cutting ability:
- steel – 12–13 mm;
- stainless steel – 7 mm;
- aluminum – 6–7 mm.
The ignition system of this model is contact arc ignition.
LED indicators:
- green color – power on;
- yellow– during the cutting process;
- red color – overheating “in protection”.
Disconnecting the torch cable - yes.
Safety requirements
You can practically learn how to use the Resanta IPR 40 plasma cutter for its intended purpose the first time. You just need to master the principle of operation, instructions for putting it into operation, and the same safety precautions. To avoid the blow electric shock, fire and injury when working with a plasma cutter, a number of requirements must be met:
- good workplace lighting;
- order in the workplace;
- absence of dust and gases;
- absence of flammable liquids in the immediate vicinity of the workplace.
Since the work involves the use of large currents, the device must have galvanic isolation. Therefore, it must be grounded before operation. Do not use the cutter in areas with high humidity and in the rain.
Features of use
In general, reviews of the plasma cutter (Resant model) speak of the device’s high practicality and manufacturability. A special feature of this device is that its operation is determined by a given cycle, in which the time of active operation in cutting mode does not exceed 10 minutes.
To avoid overheating and possible failure of the device, a protection system is provided that turns off the device when it reaches critical temperature, and turns it on when the temperature drops to safe values.
A manual inlet air pressure regulator in combination with a pressure gauge allows you to set required parameters air supply.
To ensure that the supplied air is not humid, it is recommended to use a dehumidifier, which will have to be purchased separately, since it is not included in the kit.
The grounding terminal is securely fixed to the housing, which eliminates the possibility of accidental disconnection. The potentiometer control allows you to set the required current in accordance with the type and thickness of the metal.
You should work with extreme caution and hold the plasma torch firmly in your hands. Even an experienced worker may lose control of the cutter when the trigger switch is pressed.
Green color indicates that the device is in the on position. When the trigger switch is pressed, the yellow LED lights up. Slowly, keeping a certain angle, move the torch along the line along which you plan to cut. The working fluid emerging from the nozzle will melt the metal in the contact zone.
By adjusting the current strength with the working element of the potentiometer or increasing the air supply pressure, you can control the cutting quality if it is unsatisfactory. In order to avoid idle operation of the cutter and wasteful consumption of the nozzle resource, the installation is equipped with an automatic switch in case the contact of the arc with the metal is lost.
It's worth remembering that circuit breaker does not work if you hold the cutter no higher than 1.5 mm from work surface.
The nozzle is protected from overheating by a special function, with the help of which it is blown with air after turning off the trigger switch for 20 seconds. If the red LED lights up during operation, this may mean that thermal protection is turned on, and there is no need to disconnect the device from the network, you just have to wait until it cools down.
The ignition of the arc occurs stably, but in order for an inexperienced master to master the cutting technique, it is necessary to spend time mastering it. Before the first work, it is worth practicing on various metal surfaces of varying thickness and composition, in order to develop a basis for understanding the technique.
The plasma cutter easily cuts metal parts up to 12 mm thick from mild steel. In order for cutting parameters to be optimal, it is necessary to develop a certain balance of current supply and air input.
End of work
After finishing work, you need to release the trigger switch and move the cutter away from the work surface to the side.
Then turn off the power and move the button to the off position. Place the cutter on metal plate. Remove air supply. Disconnect the plasma cutter by unplugging the power cord and allow the device to cool completely.
conclusions
The Resanta series plasma cutter is a fairly unpretentious and practically trouble-free device if you keep it clean and carry out technical inspection in a timely manner. The design of the device allows you to have trouble-free access to any node. Before work, it is necessary to inspect the device, make sure that all connections are tight, in particular, Special attention attach the ground wire to the sleeve.
The first signs that it is necessary to inspect the connections are an unstable or weakly burning arc. If the connections are checked, then you need to pay attention to the voltage stabilizer.
You should also monitor the condition of the nozzle. Clogging or excessive wear can affect both the efficiency of arc ignition and the flow of working fluid. To protect against overheating, it is necessary to monitor the input voltage and adjust the network parameters.
Overheating can be affected by both excessively high and low voltage. Before you start using the plasma cutter, you must read the operating instructions and the device data sheet.
Dimensions in box 41.5 × 19 × 46 cm
Type Inverter, Plasma cutting
Welding type cutting (CUT)
Product class Professional
Power, W 6600
Arc ignition Contact
Built-in compressor No
Pressure, bar 5 - 5
Cutting thickness, mm 12
Inverter technology Yes
Plasma cutting Yes
Availability of power plug Yes
Maximum current consumption, A 40
Regulation range welding current, A 15 - 40
Mains voltage, V 220
Burner type Removable
Weight without packaging 9.11 kg
Package weight 11.01 kg
Warranty, months 12
Contents Plasma cutter Resanta 1 pc.
Ground clamp 1 pc.
Passport (instructions) 1 pc.
Packing 1 pc.
Dimensions, cm 41.5 x 19 x 46
Barcode EAN-13 4606060000000
Description
Inverter plasma cutter RESANTA IPR-40K. Working principle of plasma cutter: process plasma cutting based on the supply of air through an electric arc. the air is heated to a very high temperature, turning into plasma, which is capable of cutting metal.
The plasma cutting process is based on the supply of air through an electric arc. The air is heated to a very high temperature, turning into plasma, which is capable of cutting metal. Heat and pressure are needed to create plasma. Electric arc provides heat supply, and through a narrow outlet hole the plasma flows out under pressure significantly exceeding the air pressure at the inlet.
Peculiarities
Cutting capacity: 12mm Steel, 7mm Stainless Steel; 6mm Aluminum;
Contact arc ignition;
LED indicator.
Contents of delivery
Inverter plasma cutter RESANTA IPR-40K
24210,00 ₽
Reviews from welders about the plasma cutting machine
Advantages:
Gone are the days when leadership belonged exclusively to gas cutters. Technologies do not stand still, and after inverter welding machines, plasma cutting machines began to appear. To produce plasma, these devices only need electricity and compressed air. High-temperature plasma is formed in a plasma torch when air passes through an electrical discharge. The air becomes ionized and enters an unusual state. The outflow of plasma from the nozzle of a plasma torch (or plasma torch) occurs due to the imparting of a positive charge to the metal being cut. It follows that the mass is always connected to the positive pole.
High-precision cuts on steel up to 12 mm thick are now performed exclusively with plasma cutters; thick metal (scrap) is still “cut” with a gas cutter.
So, I really want to become the owner of a plasma cutter, but it’s difficult to choose from the available range. What to do?
Answering this question, it should be noted that a plasma cutter called CUT 40 has firmly established itself on the market today. trademarks. The most famous of them is AuroraPRO AIRHOLD 40, you've probably heard of her. It is also sold under a different name - Cedar CUT 40. Both are one and the same.
So, these proven products have been successfully resisted by Resanta IPR-40K for more than a year now, which, by the way, has proven itself to be a more stable operating device than CUT 40. Resanta plasma cutter is often chosen by owners of successfully working ones (for whom they really work successfully) many years welding inverters Resanta. And they don’t regret the money spent.
Characteristics of the Resanta cutter:
Power:220V, 50Hz
Output current: 15-40A
Duty cycle: 40 A - 35%;
Maximum thicknesses depending on metal:
carbon and structural steels up to 12 mm
corrosion-resistant steels – up to 7 mm
aluminum and its alloys – up to 6mm.
As you can see, the higher the electrical conductivity of the metal, the lower the thickness of the cut.
Flaws:
Many online stores sell the device itself, but do not sell consumables. And they periodically burn. The plasma temperature is very high, about 10 thousand degrees, the metal being cut even evaporates in places. Inquire about the availability of consumables; if they are not there, then there is no point in buying the device.
Inverter plasma cutters of domestic production enjoy deserved popularity. Low cost and optimal ratio price and quality does Russian models Plasma cutters are the most affordable among household and industrial equipment.
One of prominent representatives domestic products are plasma cutters Resanta IPR. A special feature of Resanta models is that they are fully adapted for work in domestic conditions and can be connected to electrical network with a voltage of 220V.
Plasma cutter Resanta model IPR 25
The inverter plasma cutter Resanta IPR 25 is a typical representative of inverter models for domestic purposes. To operate, you will need to connect to a regular 220V network. The installed inverter helps stabilize the voltage supply and make processing possible steel parts up to 8 mm.The IPR 25 plasma cutter can operate without switching off with a stable performance of 15A. PV at 25A is 35%. This makes it possible to use the Resanta IPR 25 plasma cutter without shutting down and overheating for 3.5 minutes. In general, the IPR 25 device fully justifies its purpose and is classic example equipment for household use. The arc is started using autostart with a 5-minute turn-on interval.
Plasma cutter Resanta model IPR 40
The Resanta IPR 40 inverter plasma cutter is suitable for those who plan to use the equipment with greater intensity than the previous model. The inverter voltage supply ensures smooth auto-start of arc ignition.
At maximum power output current is 40A, the installation can operate for 3.5 minutes. If you plan to use a voltage of 20A, then IPR installation 40 will be able to work without the need to shut down and overheat. With modest dimensions, the Resanta IPR 40 plasma cutter is capable of cutting steel up to 12 mm thick, which is quite enough for cutting at home. Stable job The device is provided by the IGBT Inverter control board.
The Resanta IPR 40 model is not an industrial plasma cutter, but its performance is more than enough to perform everyday work. The model is especially popular among construction crews, thanks to its compact size and high performance.
Plasma cutter Resanta model IPR 40K
The inverter plasma cutter Resanta IPR 40K is another representative of household equipment, which has almost identical technical specifications, like the previous model. IPR 40K operates from a 220V network. At the same time, the IGBT Inverter board provides stable voltage and, as a result, high performance.
Small dimensions do not affect the characteristics of the model, allowing the processing of steel with a thickness of 12 mm and aluminum of 6 mm. The installation feels great, producing an output voltage of 20A. If you need a current of 40A, the IPR 40K device will be able to work for only 3.5 minutes, without shutting down or overheating.
A feature of Resant IPR 40K from the previous model is the use of contact arc ignition. The model is suitable for household and limited industrial applications(for carrying out single one-time works).
Technical characteristics of Resanta plasma cutters
Network settings | 230 V / 50 Hz / 20 A (max.) | 230 V / 50 Hz / 30 A (max.) | 230 V / 50 Hz / 30 A (max.) |
Output current | |||
Duty cycle | |||
Control board | |||
Air pressure | |||
Cutting ability | 8mm Steel; 5mm Stainless steel; 4mm Aluminum | 12mm Steel; 7mm Stainless steel; 6mm Aluminum | 12mm Steel; 7mm Stainless steel; 6mm Aluminum |
Arc ignition system | Auto start (at 5 second intervals) | Contact arc ignition |
What makes Resanta models popular despite their relatively low productivity?
- Consumables for Resanta plasma cutter- they are easy to get, they are always in stock and are relatively cheap compared to foreign analogues.
- Performance- for household purposes, a power of 40A and the ability to cut metal 12 mm thick is more than enough. If you plan to use the Resanta cutter to perform one-time work, this is one of the best options equipment.
- Connection to normal voltage network- the inverter installed in the Resanta plasma cutter allows you to use a network with a voltage of 220V without noticeable fluctuations for the residents of the house.
- Compact dimensions- the inverter is easy to carry in your hands, and small sizes devices facilitate the process of its operation.