Fountain made of glass and wood. Home glass waterfall is an exquisite decor in the apartment. Our specialists in the office of the company "Aquadesigner" installed a decorative waterfall on glass (exhibition sample)
The design of the waterfall on glass is not very complicated. A lid and panel will be held on the podium, the main function of which is to protect the waterfall from dust and dirt. For illumination, it is best to choose neon bulbs (LED-backlight), LEDs are also suitable, but their disadvantage is that they cannot shine through water by more than 30 cm. You can arrange the bulbs the way you like best: top, bottom or on the side.
Before starting work, you should draw a diagram of the waterfall, as well as calculate its dimensions. If this is your first experience, we advise you to start by making a small, modest model to understand all the intricacies of how to make a waterfall on glass, and if everything turned out great for you, then move on to a large waterfall.
Start by making a podium. Once the podium is ready, you can install a power supply, an aeration system and a check valve in it, thanks to which the water will remain in place when the waterfall is turned off, and not fall down the tube. Also install a backlight module, LED lamp or RGB controller.
Now you should install plexiglass on this podium, through which you can see the built-in backlight. Place a glass vessel in the tray and fill it with water, as the water column must be kept constant. Now let the tube out of the compressor so that air bubbles can get into the holes in the Plexiglas.
In order for the air bubbles coming out of the tube to be evenly distributed, use an acrylic spray with holes. As you can see, making a waterfall on glass with your own hands is not so difficult. Now you need to make sure that the tube fits into each of the holes. By the way, you can adjust the diameter of the holes so that the bubbles are of different volumes, so the waterfall will be even more beautiful.
You should consider where you will hide the tank, which will be needed to replenish the water. For example, it can be installed on the waterfall itself, or it can be hidden between the glass and the podium. So that the water does not stagnate, but leaves, you can also make a small faucet. It is important to use purified distilled water, and before the first run of the waterfall, apply a detergent to the glass that removes dirt and grease, thereby ensuring an even flow of water over the glass.
And in conclusion, let's say that a waterfall in an apartment is not only a fashionable design solution that allows you to transfer a piece of nature to your home. The murmur of water helps to relax, calm down, put feelings and thoughts in order. Also, when the waterfall is running, some of the water is constantly evaporating, which helps to humidify the air in the room and reduces the formation of dust.
Waterfall on glass with delivery in Russia. The price is indicated for 1 sq.m. as standard, also check out the possible options for replacement components and finishes. When applying by email, please have the following information ready:
- Size, width and height. If the terms of reference take into account the depth (in case of installation in a niche or any kind of thresholds), indicate the maximum value.
- Location (near the wall, between the columns as a partition, a separate element).
- Color and finish material (if required, options are listed below).
For a more correct calculation and understanding of the situation, it is advisable to attach a photo of the installation site, visualization, drawings, sketches (must be professionally drawn up).
Model "A-1"
- Body: Polystyrene.
- Backlight: RGB with remote control.
- Pump: SICCE (Italy).
- Waterfall: Acrylic glass.
Additional Information
Attention! Pipes for supplying water to the pouring system are laid in the walls (strobes) or niche voids. In most cases, the bookmark is made at the time of the rough finish of the room. The structure cannot be moved to another location without replacing the pipes.
Model "A-2"
- Body: Polystyrene.
- Illumination: RGB with remote control.
- Pump: SICCE (Italy).
- Waterfall: Acrylic glass.
- The cost of 1 sq.m.: from 33,000 rubles.
Additional Information
Water supply pipes to the bottling system are hidden in vertical profiles. The design is completely mobile, delivery is made completely in working condition.
Model "A-3"
- Body: Polystyrene.
- Backlight: RGB with remote control.
- Pump: SICCE (Italy).
- Waterfall: Acrylic glass.
- The cost of 1 sq.m.: from 33,000 rubles.
Additional Information
Free-standing structure, depending on the size, it can be fixed to the floor or ceiling (the structure is mobile). Unlike previous models, the lower tank is increased in depth, the water slide is shifted to the center.
Standard equipment (white and black case).
Specifications
Think carefully about every detail from location to design. Check out the options in more detail:
- Location. In order to move "A-1" you will need to order new water supply pipes and lay strobes in the wall. "A-2" and "A-3" are mobile, you only need to unscrew the bolts fixing the structure.
- Waterfall. In 90% of cases, we use acrylic glass, in relation to silicate (hardened or triplex), it is absolutely safe to use. According to the characteristics of light transmission, it is absolutely not inferior, it can be cleaned with any cleaning agent. Working with acrylic is less labor intensive, so the total cost will be lower. On the back side it is possible to apply a logo or a photo.
- Frame . Made from white or black polystyrene.
- Finishing . Adhesive is included as standard PVC film. Along with high strength, it is very elastic, moisture resistant, resistant to mechanical stress. An extensive selection of colors, imitation of wood, metal, leather and other materials. If you are planning to buy a glass waterfall and save money, this is the perfect option. If your room has a unique style, we can decorate the case with almost any material: mosaic tiles, stainless steel, wood, bamboo and other materials. Specify in the terms of reference the one you need, we will consider any tasks assigned.
- pump. It is equipped with a pump of the SICCE company, made in Italy, it can be replaced with more expensive HEISSNER or OASE, made in Germany. Based on the situation on the market and supplies, they can be replaced with similar ones in terms of characteristics. The warranty period declared by the manufacturer is 1 year.
- Backlight. There are two options: 1. Dot one-color mounted in the top decorative cover; 2. RGB tape at the top and bottom of the water slide. It is controlled by a remote control, multi-colored, equipped with several playback modes.
- Additional modules. Depending on the size or desire of the customer, installation is possible: automatic topping up and draining of water. Installing a fogger, a second pump with a special nozzle spraying water in the form of a small fountain.
general information
In the modern life of the metropolis, many people sorely lack contact with wildlife. This is especially needed for people who do not have the opportunity to go to the country on a day off. We suggest contacting our company and buying a glass waterfall. Having decorated it with living plants, you can turn a small area of \u200b\u200byour apartment into a cozy corner. In which it will be pleasant to relax after a long day at work, the gentle murmur of water will relieve the stress accumulated during the day.
In some cases, designers use waterfalls as partitions when dividing a room into zones, which looks very effective. Many equip their living quarters according to the Feng Shui system, in which AQUA objects are a prerequisite.
Turning to us in order to buy a waterfall on glass, you will receive a guaranteed quality product at the most affordable prices. Depending on the workload of production, production takes from 10 to 20 working days.
Waterfall on glass "Water Wall" or "Water Wall" is a vertically mounted plane of glass, stone, or other material over which water falls.
Such fountains are most often chosen for installation in offices, halls, houses, where they perform the following functions:
- Water walls humidify the air very effectively and naturally. This is especially true during the heating season. And in the heat they serve as an additional source of air conditioning. Thus, waterfalls on stone or glass improve health and well-being.
- Create a unique atmosphere in room. The presence of a water structure transforms the space, turns a static environment into a dynamic one. The use of water structures in the interior shows taste and originality, gives a special chic to the room, sets the right accents.
- Attract attention with movement, sound, lighting.
- Water movement promotes relaxation, soothes and set up for the best. No wonder they say that you can watch endlessly how water runs.
- Serves for zoning space. Fountains "Wall of water" are often used to decorate niches, passages, arches. Waterfalls "Water Wall" can also serve as a partition or be a free-standing element of decor.
Completed works "Wall of water":
High waterfall in the shopping center "Tiara":
Three glass waterfalls combined into a single system:
The dimensions of the structures "Waterfall on glass" or "waterfall on stone" are different: from small indoor compositions to powerful waterfalls in the entire wall. Depending on the required dimensions, equipment, materials, and decorative elements are selected.
These fountains are quite comfortable and easy to use, easy to maintain, optimal in price range and at the same time harmonious water works that are healthy and look great in different styles. They can be combined with bas-reliefs and sculptures for classic interiors, or make laconic compositions of modern design.
Where are they most often used? Water walls fit well into any interiors. In cafes, restaurants, "water wall" waterfalls are used to decorate halls and passages. In shopping and business centers, water walls can be a basic design element or fill empty spaces. In houses and apartments, they are installed in living rooms to humidify the air and give uniqueness to the interior.
With the help of these compositions, you can elegantly decorate an empty wall, for example, in an office center, when space is limited, but you need a memorable and beautiful visual design.
The water pressure can be adjusted as desired, and the backlight is also adjustable, giving an additional original effect. Fog settings create a special aura and attract the eye.
We carry out all work from the development of a sketch and design of a waterfall on glass to installation on site. The production of glass waterfalls is carried out in Moscow, delivery and installation - in any city.
We are ready to offer any options for finishing fountains. Stones, pebbles, marble, glass, and plants are often used as decor.
The cost of water walls is calculated individually. To calculate the cost, it is important to decide whether the glass waterfall will be autonomous, or whether it will be connected to communications and water will automatically flow into it. Prices vary depending on the size of the wall (glass), the complexity of the structures, the power of the necessary equipment, as well as the desired finish and decor.
At the same time, the quality of the final products, for which we give a guarantee, is important to us. Therefore, we use only high-quality components for the manufacture of water walls: pumps, sealants, electrics, waterproofing. Pumps are usually installed silent, so that only the splash of water is heard, and not the noise of working equipment. With such equipment, waterfalls on stone and glass work reliably and smoothly.
The fountain gives dynamics to the whole room, changes the atmosphere of the house or office. A unique individual fountain reflects the good taste of the owner and makes the room original and memorable.
Regardless of the purpose, size and budget, we will produce unique and aesthetic compositions "Water Wall" ("Water Wall") for various style solutions. Waterfalls "Water Wall" will undoubtedly give freshness and dynamics to your interior. And the play of water in the waterfall on the glass will create a unique picture that you can admire endlessly.
We are ready to make any non-standard water walls, including various sizes, using elements of strings, jet fountains, as well as combinations with bubble panels and any decorative finish.
Do-it-yourself glass waterfall is a wonderful decoration of a modern interior. The water flowing down the glass is both soothing and soothing. In addition, the presence of such a waterfall in one of the housing rooms has a beneficial effect on the microclimate of the room, moistening the air. In this article we will tell you about the features of making a glass waterfall.
Do-it-yourself street waterfall on glass
To begin with, we want to offer the option of making a decorative waterfall on glass, which is installed on the street. This design has the shape of a waterfall, where water runs along the wall.
When working on the manufacture of this decoration, you will need the following:
- Wooden boards.
- Bar.
- Veneer.
- Masking tape.
- Paraffin paste.
- Tempered glass, the size of which will determine the dimensions of the structure.
- A pump with a minimum power that will be used to organize the circulation of water.
- Plastic pipes.
- Stones.
- Brackets with fasteners.
- Decoration stones.
Important! Various plants will look very organic next to such a fountain. And to decorate them beautifully, try our master classes.
The production sequence looks like this:
- From a board pre-treated with an antiseptic, make a box the width of which will be equal to the width of the tempered glass. Treat the inside of the box with paraffin paste - this will prevent the wood from coming into contact with moisture. As the basis of the waterfall, use the frame part of the timber.
Important! The internal dimensions of the structure must be such that a box is placed inside this caracas and is stably located in it.
- After pretreatment, place the crate inside the structure. Inside the box, lay a plastic film, preferably dark and opaque, with which you must achieve absolute tightness of the structure.
- Next, cut two boards, the dimensions of which should match the height of the glass. These parts will fix the glass wall in the box. To finish the future design, use veneer. Use a wooden lining as a finish for the box itself.
- Install tempered glass along the central part of the box. For its additional fixation, also install a board above it. Next, install the pumping equipment, connect the plastic pipes through which water will circulate.
- To fix the pipes on the side racks, use special rings that can be bought in the plumbing department of the store. Equip the upper pipe with an additional hole so that the water flowing out falls onto the upper part of the glass.
Important! The size of the hole must be selected individually, for this, first make a small hole, if necessary, gradually increasing it.
- The frame of the waterfall is additionally sheathed with any suitable material for this, painted and varnished.
- Install stones inside the box that will perform a decorative function.
- Pour water into the bottom of the box and turn on the pump.
Important! The fountain can be additionally decorated with color effects by installing LED lighting.
home waterfall on glass
We offer another option for making a home glass waterfall with your own hands, which can be easily placed in a bedroom or living room.
When working on making a waterfall, you will need the following:
- Organic glass, the size of which will depend on the size of the waterfall itself.
- Materials and light bulbs for organizing lighting.
- Compressor.
Important! When choosing this element, you should pay attention to its noise performance - it should be minimal.
- Vinyl hose.
- Check valve.
Important! Perhaps, the design of other objects with glass will be appropriate in the interior of your home. And for this you can use not only transparent material. It is very interesting to combine various details if.
The sequence of making a home waterfall looks like this:
- Before proceeding with the manufacture of the structure, create its drawing, which will clearly describe the size, parameters, materials for the manufacture of each of the parts, the location of the lighting and pumping equipment, and the future finish. The waterfall should be compact and not take up extra space.
Important! When choosing the width and height of the product, start from the individual dimensions of the room in which the waterfall will be installed.
- Equip the upper part of the waterfall with an additional panel cover that will protect the product from dirt and dust.
Important! Before starting the manufacture of the waterfall, it is recommended to clean the glass surface with. For the operation of a home waterfall, it is desirable to use purified, distilled water.
- In order for the waterfall to humidify the air and perform an aesthetic function, install lighting in it. For these purposes, you can use neon moisture-resistant lamps, which can be bought at any hardware store.
- Create the foundation part of the structure. It must be strong and able to support the weight of glass and liquid, as well as airtight. In addition, the dimensions of the foundation must be such that it can easily fit a glass wall.
- Install check valve, air system and feed elements. It should be borne in mind that the valve ensures that the fluid supply is turned off or it completely solidifies. In addition, it is advisable to install the backlight in advance and check the performance.
- Install organic glass. It is on it once again turn on the backlight.
- At the bottom of the pallet, make a glass vessel in which water will be located.
Important! Please note that the water level must be constant. Only in this way will it be possible to achieve the correct operation of the system.
- Air bubbles supplied by water must be uniform and uniform in shape, which will require an acrylic sprayer with additional holes.
- Decide on the location of the vessel with water. You can install it at the top of the waterfall or at the junction of the floor and the podium.
Important! Glass is a very interesting material in terms of creating various objects from it. We also offer you some interesting ideas for decorating your home using this material:
An artificial waterfall is a stylish, up-to-date and high-status interior decoration. It looks original, does not require special care, has a beneficial effect on the mood and psyche - it calms and relaxes.
A variety of materials can be used as the basis for a waterfall: artificial and natural stone, metal, mirror, glass. Glass options are one of the most popular. Experts of the Aqua-Sto company will tell about the features of their design and application.
Where are they applied?
Waterfalls on glass are very popular in Moscow and other large cities. This decoration will suit:
- for apartment interiors;
- cottages, country houses;
- winter gardens, greenhouses;
- adjoining territories, personal plots;
- offices;
- shopping centers;
- cafes, restaurants;
- nightclubs;
- beauty salons, SPA;
- water parks.
Depending on the type of decoration, waterfalls will fit into rooms decorated in various styles: from modern to high-tech. They can be used for zoning, indoor air humidification, integrated into walls, doors, shop windows, furniture, aquariums, terrariums.
Our consultants are always ready to help you choose the appropriate option from the standard ones or develop an individual project for you that takes into account all the nuances of the interior or the local area.
Design features
All decorative glass waterfalls consist of several parts:
- the base surface on which water flows - smooth or embossed tempered glass;
- a pump for supplying water upwards, providing a circular circulation;
- receiving container;
- aluminum racks, in which there are electrical and water communications;
- lighting - LED or RGB lamps.
Distilled water at room temperature acts as a filler, which eliminates flowering, the appearance of an unpleasant odor, clogging and other operational problems. It is not necessary to connect the system to the water supply.
What do we offer?
The Aqua-Sto company offers services for the rental, design, manufacture, delivery, installation and maintenance of decorative glass waterfalls. The client can choose one of the standard options, slightly modernizing it, or order the development of an individual project that takes into account the size, design features, and style of the room.
Our craftsmen, who have vast experience, have completed more than one hundred orders. We can offer laconic smooth options, embossed, with engraving, drawings, frosted areas, stained-glass windows, lighting, integration into the wall, door, furniture; the design of the water flow in the form of a smooth surface, streams, drops. The sizes and shapes of structures can be any. Examples of completed work are presented in the Portfolio section of the website.
Benefits of cooperation
Choosing to buy a glass waterfall in the Aqua-Sto company, our customers receive:
- reliable, economical, efficient, environmentally friendly design that requires a minimum of maintenance and fits perfectly into the interior;
- services of competent and experienced employees, true professionals in their field;
- affordable prices for making waterfalls
- reasonable terms of order fulfillment;
- discounts for regular and wholesale customers;
- low cost of maintenance of the system by a master (diagnostics, performance check, replacement of faulty parts, cleaning, water change);
- a wide range of services for the manufacture, installation and maintenance of aquariums, waterfalls, bubble panels and other decorative water objects.
We work with private and corporate customers: we will equally quickly and efficiently create a small waterfall for a home interior or a recognizable decorative solution for a network of commercial facilities.
How to order?
To rent or buy a glass waterfall in Moscow, just contact our specialists. They will help you make a choice, name the cost of completing the order, fill out an application and specify the deadlines..ru or come to the office at Moscow, st. Ibragimova, 5A. Waiting for you!
Exotic fish in reputable aquariums,
spectacular bubble designs
with bright illumination - status decorations
for your interiors.
And it's very easy to get them in Aqua-Store!